Re: linphone et routeur
Le 22/04/2011 06:50, Antoine Vagabonddurail a écrit : Bonjour, Bonjour [...] En regardant sur le net, j'ai vu qu'en effet il était mieux de sésactiver l'option de gestion du SIP pour faire fonctionner linphone. Pourquoi ? Le problème n'existe pas seulement avec Linphone: le signal SIP passe par le port 5060. Si Linphone utilise ce port en local et que ton NAT est symetrique on aura Linphone (port 5060) - modem qui gere SIP (port 5060) - Freephonie. Tu remarqueras que le signaling en retour entrera dans le port 5060 du modem qui fera je ne sais quoi, ce qui fait que cela ne fontionne pas. Une solution: configure Linphone afin qu'il utilise le port 12345 par exemple, cela devrait fonctionner. Cependant personne ne pourra t'appeller en direct à moins de dire à ton modem de forwarder le port 5060 en entrée vers IP Linphone:port 12345 -- Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4db12cff.6080...@tootai.net
Re: linphone et routeur
Bonjour, je vois le principe, c'est un peu le raisonnement que je me faisais, à la limite prêt que le test que j'ai trouvé sur le net à ce sujet, indique le type passe en sip depuis un client sous windows. Il ne parle pas du fait que ce client à modifier ses ports. Après c'est peut-être un oublie de sa part dans son test. Merci en tout cas ! Amicalement, Antoine. Le 21/04/11, Antoine Vagabonddurailvagabonddur...@gmail.com a écrit : Bonjour, j'utilise linphone pour me connecter au service sip de free (freephonie.net). Je n'ai jamais eu de problèmes jusqu'à il y a peu quand j'ai disposé d'un nouveau routeur dsl. C'est un speedstream 5200. J'ai d'abord pensé à un problème de firewall et je l'ai désactivé mais rien a changé. Peut-être un problème avec la translation NAPT que j'utilise ? Je n'ai rien trouvé à ce sujet sur le net. Quelqu'un aurait-il une idée ? Amicalement, Antoine. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTimRERu1cY47UYsXK=g7zt_44tp...@mail.gmail.com
Re: linphone et routeur
Le 22/04/11 09:23, daniel huhardeaux a écrit : Le 22/04/2011 06:50, Antoine Vagabonddurail a écrit : Bonjour, Bonjour [...] En regardant sur le net, j'ai vu qu'en effet il était mieux de sésactiver l'option de gestion du SIP pour faire fonctionner linphone. Pourquoi ? Le problème n'existe pas seulement avec Linphone: le signal SIP passe par le port 5060. Si Linphone utilise ce port en local et que ton NAT est symetrique on aura Linphone (port 5060) - modem qui gere SIP (port 5060) - Freephonie. Tu remarqueras que le signaling en retour entrera dans le port 5060 du modem qui fera je ne sais quoi, ce qui fait que cela ne fontionne pas. Une solution: configure Linphone afin qu'il utilise le port 12345 par exemple, cela devrait fonctionner. Cependant personne ne pourra t'appeller en direct à moins de dire à ton modem de forwarder le port 5060 en entrée vers IP Linphone:port 12345 Le problème est encore plus complexe que ça. SIP n'est que le protocole de signalisation. En gros, il sert juste à dire que tu es connecté et à quelle ip tu es joignable. Les flux audios et vidéos sont alloués sur des ports séparés. En ouvrant le port 5060, il est possible de faire sonner un téléphone SIP mais la conversation n'aura pas lieu (du moins pas sans utiliser d'autres artifices que SIP seul). Ça marche sur le même principe que le ftp en somme. Donc la solution, c'est soit ipv6 (donc on oublie tout de suite), soit d'avoir un routeur qui fait du connection tracking et qui ouvre les ports rtp à la volée. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4db1420a.6040...@toniob.net
Re: linphone et routeur
Bonjour, je n'ai pas encore testé ta solution Daniel mais quelques réflexions me font douter, haut homme de peu de foie que je suis il me semble que le porte forwarding empêchera mon client sip de se connecter vers le serveur freephonie et que dans tous les cas le client sip n'agira pas comme un serveur sip quand on va m'appeler donc l'appelle ne me parviendrait pas je pense. Amicalement, Antoine. Le 22/04/11, Antoine Vagabonddurailvagabonddur...@gmail.com a écrit : Bonjour, je vois le principe, c'est un peu le raisonnement que je me faisais, à la limite prêt que le test que j'ai trouvé sur le net à ce sujet, indique le type passe en sip depuis un client sous windows. Il ne parle pas du fait que ce client à modifier ses ports. Après c'est peut-être un oublie de sa part dans son test. Merci en tout cas ! Amicalement, Antoine. Le 21/04/11, Antoine Vagabonddurailvagabonddur...@gmail.com a écrit : Bonjour, j'utilise linphone pour me connecter au service sip de free (freephonie.net). Je n'ai jamais eu de problèmes jusqu'à il y a peu quand j'ai disposé d'un nouveau routeur dsl. C'est un speedstream 5200. J'ai d'abord pensé à un problème de firewall et je l'ai désactivé mais rien a changé. Peut-être un problème avec la translation NAPT que j'utilise ? Je n'ai rien trouvé à ce sujet sur le net. Quelqu'un aurait-il une idée ? Amicalement, Antoine. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTi=8u8W9NAdzxKYDsxVyvjSkhXJê@mail.gmail.com
Re: linphone et routeur
Le 22/04/2011 10:53, Anthony Bourguignon a écrit : Le 22/04/11 09:23, daniel huhardeaux a écrit : Le 22/04/2011 06:50, Antoine Vagabonddurail a écrit : Bonjour, Bonjour [...] En regardant sur le net, j'ai vu qu'en effet il était mieux de sésactiver l'option de gestion du SIP pour faire fonctionner linphone. Pourquoi ? Le problème n'existe pas seulement avec Linphone: le signal SIP passe par le port 5060. Si Linphone utilise ce port en local et que ton NAT est symetrique on aura Linphone (port 5060) - modem qui gere SIP (port 5060) - Freephonie. Tu remarqueras que le signaling en retour entrera dans le port 5060 du modem qui fera je ne sais quoi, ce qui fait que cela ne fontionne pas. Une solution: configure Linphone afin qu'il utilise le port 12345 par exemple, cela devrait fonctionner. Cependant personne ne pourra t'appeller en direct à moins de dire à ton modem de forwarder le port 5060 en entrée vers IP Linphone:port 12345 Le problème est encore plus complexe que ça. SIP n'est que le protocole de signalisation. En gros, il sert juste à dire que tu es connecté et à quelle ip tu es joignable. Les flux audios et vidéos sont alloués sur des ports séparés. En ouvrant le port 5060, il est possible de faire sonner un téléphone SIP mais la conversation n'aura pas lieu (du moins pas sans utiliser d'autres artifices que SIP seul). Ça marche sur le même principe que le ftp en somme. Bien sur. Mais tant que le 5060 ne fonctionne pas -et c'est le seul port géré par les modems routeurs qui gèrent le SIP puisqu'ils ne savent pas quel sera/seront les ports RTP utilisés- il n'y a que ce port à faire fonctionner. Pour l'audio on pensera que le modem n'est pas complètement stupide. Et si cela ne devait pas fonctionner, Linphone permet aussi de figer son port UDP audio ou video. Ainsi un simple port forwarding sur le modem devrait faire fonctionner l'ensemble. [...] -- Daniel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4db14a0...@tootai.net
HS: Vérification envoi backup rsync
Bonjour, A mon stage, j'ai installé un ordinateur qui servira de serveur sous Debian squeeze. J'ai besoin d'effectuer une sauvegarde quotidienne sur un partage w$. J'ai donc monté avec smbfs ce répertoire. J'utilise rsync de façon simple, de la même manière qu'un cp. Mon problème est le suivant : Comment être sûr que la sauvegarde s'est bien effectuée ? Concrètement, si le serveur cible est tombé, je suppose que le rsync va écrire dans le point de montage, donc sur le disque dur et non dans le partage, par conséquent, aucun message d'erreur. Comment pourrais-je vérifier que la sauvegarde s'est mal passée afin d'envoyer un mail ? Envoyer un mail, je pense savoir faire :-). Bien cordialement, -- Raphaël POITEVIN -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTikLa9f1mksMe1uOxkTFLQp=xfs...@mail.gmail.com
[no subject]
Bonjour, Peut on installer DEBIAN 6.0 32 bits sur une architecture amd64 sans conséquence notable sur les applications telles qu'Eclipse 32 bits (qui ne trouve pas le « ld »)? Merci, Claude Schoen
Re: Debian 6.0 32Bits sur AMD64
Le 22/04/2011 11:39, Claude Schoen a écrit : Bonjour, Peut on installer DEBIAN 6.0 32 bits sur une architecture amd64 sans conséquence notable sur les applications telles qu'Eclipse 32 bits (qui ne trouve pas le « ld »)? Merci, Claude Schoen ** Bonjour, Oui vous pouvez installer sans problème une distribution 32 Bits sur une architecture AMD64. Il n'y a aucun problème de ce côté là. Cordialement.
Re:
Bonjour Claude.. En bref oui a ta question au bemol du support d'un large espace d'adressage memoire (plus de 4Go voire 8 Go) a noter que malgre les apparences la version 32bits semble plus efficiente d'après les benchmarks... Jerome Envoyé avec BlackBerry® d'Orange -Original Message- From: Claude Schoen claude.sch...@esg-france.fr Date: Fri, 22 Apr 2011 11:39:37 To: debian-user-french@lists.debian.orgdebian-user-french@lists.debian.org Subject: Bonjour, Peut on installer DEBIAN 6.0 32 bits sur une architecture amd64 sans conséquence notable sur les applications telles qu'Eclipse 32 bits (qui ne trouve pas le « ld »)? Merci, Claude Schoen
Re: linphone et routeur
Bonjour, en effet, pour téléphoner et établir les connexions audio et vidéo, linphone passe par rtp sur d'autres ports. Classiquement le 7078 pour audio et 9078 pour vidéo. Je ne pense pas pour le moment que cela posera problème une fois que l'échange sip pour m'identifier au serveur freephonie sera passée. Car oui, ça commence mal dès le départ, l'échange SIP avec le serveur freephonie ne se fait pas. Je n'en suis donc pas au moment de pouvoir envisager d'appeler. J'ai testé ta solution Daniel, et cela ne march pas comme mes réflexions me le faisaient craindre. J'ai changé le port utilisé par linphone et rien de mieux pour m'identifier auprès du serveur freephonie. En fait, en relisant la doc attentivement pour le modem, je pense qu'il y a peut-être une confusion de vocabulaire. La seule référence à sip est dans les règles de firewall préconstruits. Celle-ci disent qu'il autorise en sortie et de fait autorise en entrée si si cela répond à une sollicitation par une demande sortante. Nul part il n'est dit que le sip est géré ou prise en charge. Y a-t'il distinction ou confusion de ces deux idées ? Amicalement, Antoine. Le 22/04/11, Antoine Vagabonddurailvagabonddur...@gmail.com a écrit : Bonjour, je n'ai pas encore testé ta solution Daniel mais quelques réflexions me font douter, haut homme de peu de foie que je suis il me semble que le porte forwarding empêchera mon client sip de se connecter vers le serveur freephonie et que dans tous les cas le client sip n'agira pas comme un serveur sip quand on va m'appeler donc l'appelle ne me parviendrait pas je pense. Amicalement, Antoine. Le 22/04/11, Antoine Vagabonddurailvagabonddur...@gmail.com a écrit : Bonjour, je vois le principe, c'est un peu le raisonnement que je me faisais, à la limite prêt que le test que j'ai trouvé sur le net à ce sujet, indique le type passe en sip depuis un client sous windows. Il ne parle pas du fait que ce client à modifier ses ports. Après c'est peut-être un oublie de sa part dans son test. Merci en tout cas ! Amicalement, Antoine. Le 21/04/11, Antoine Vagabonddurailvagabonddur...@gmail.com a écrit : Bonjour, j'utilise linphone pour me connecter au service sip de free (freephonie.net). Je n'ai jamais eu de problèmes jusqu'à il y a peu quand j'ai disposé d'un nouveau routeur dsl. C'est un speedstream 5200. J'ai d'abord pensé à un problème de firewall et je l'ai désactivé mais rien a changé. Peut-être un problème avec la translation NAPT que j'utilise ? Je n'ai rien trouvé à ce sujet sur le net. Quelqu'un aurait-il une idée ? Amicalement, Antoine. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/banlktim3zrbitnpenh14t3hp3rjnt+4...@mail.gmail.com
Re: Debian x86 sur architecture amd64
Le Friday 22 April 2011 11:39:37, Claude Schoen a écrit : Bonjour, Bonjour, Peut on installer DEBIAN 6.0 32 bits sur une architecture amd64 sans conséquence notable sur les applications telles qu'Eclipse 32 bits (qui ne trouve pas le « ld »)? L'installation et l'utilisation ne pose pas de poblème (à ma connaissance), mais voulez-vous faire cette installation pour résoudre un problème lié à Eclipse ne trouvant pas « ld » ? Si c'est le cas, le problème risque de ne pas être résolu par cette réinstallation. Bonne journée, -- ~TraydenT~ -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201104221205.54436.trayd...@gmail.com
Re: Debian x86 sur architecture amd64
On Fri, 22 Apr 2011 12:05:54 +0200 TraydenT trayd...@gmail.com wrote: Le Friday 22 April 2011 11:39:37, Claude Schoen a écrit : Peut on installer DEBIAN 6.0 32 bits sur une architecture amd64 sans conséquence notable sur les applications telles qu'Eclipse 32 bits (qui ne trouve pas le « ld »)? L'installation et l'utilisation ne pose pas de poblème (à ma connaissance), mais voulez-vous faire cette installation pour résoudre un problème lié à Eclipse ne trouvant pas « ld » ? Si c'est le cas, le problème risque de ne pas être résolu par cette réinstallation Je pense aussi que ce problème de ld pas trouvé n'a rien à voir avec l'architecture 32 ou 64 bits de la distribution. Pour info, le programme ld est dans le paquet binutils et il faut s'assurer que ce paquet est bien installé. Enfin, on pourrait même avoir une distribution 32 bits sous une distribution 64 bits, par exemple en utilisant debootstrap et chroot. Librement -- Basile STARYNKEVITCH http://starynkevitch.net/Basile/ email: basileatstarynkevitchdotnet mobile: +33 6 8501 2359 8, rue de la Faiencerie, 92340 Bourg La Reine, France *** opinions {are only mine, sont seulement les miennes} *** -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110422120952.c0bdad8c.bas...@starynkevitch.net
Re: HS: Vérification envoi backup rsync
Le vendredi 22 avril 2011 à 11:36 +0200, Raphaël POITEVIN a écrit : Bonjour, A mon stage, j'ai installé un ordinateur qui servira de serveur sous Debian squeeze. J'ai besoin d'effectuer une sauvegarde quotidienne sur un partage w$. J'ai donc monté avec smbfs ce répertoire. J'utilise rsync de façon simple, de la même manière qu'un cp. Mon problème est le suivant : Comment être sûr que la sauvegarde s'est bien effectuée ? Je te conseil de monté ton partage samba juste avant de faire la sauvegarde et de le démonté ensuite. Si ce n'est pas possible, il faut tester le montage en recherchant par exemple l'espace libre. Si ton point de montage est /mnt/backup, une recherche de /mnt/backup en sorti de commandes 'mount' n'est peut être pas suffisant. Si il y a eu un pb réseaux, ton point de montage peut être là (il apparaît en sorti de la commande mount) mais non utilisable/corrompu. Si tu monte le partage juste avant la sauvegarde et que tu le démonte après tu n'auras pas ce problème. Tu peux vérifier le code de retour de la commande 'mount' pour vérifier que ton montage s'est bien effectuer (if [ $? -ne 0 ]) Par exemple : echo 'Montage du partage samba' mount /mnt/backup if [ $? -ne 0 ] then echo Probleme au montage du partage samba # ici tu peux envoyer ton mail exit 1 fi rsync ... umount /mnt/backup Enfin, je te conseil de regarder l'option de rsync --modify-window qui peut éviter des transferts alors que les fichiers sont les mêmes. Julien -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/1303476546.2089.10.camel@pc-julien.office
Re: HS: Vérification envoi backup rsync
Le 22/04/11, Julienjul...@nura.eu a écrit : Je te conseil de monté ton partage samba juste avant de faire la sauvegarde et de le démonté ensuite. Si ce n'est pas possible, il faut Oui, cette idée m'est venue à la pause de midi. Je me suis posé la question s'il était indispensable que le partage soit monté au démarrage. Finalement, cela était bon quand j'avais à tester des choses, mais maintenant plus la peine. echo 'Montage du partage samba' mount /mnt/backup if [ $? -ne 0 ] then echo Probleme au montage du partage samba # ici tu peux envoyer ton mail exit 1 fi rsync ... umount /mnt/backup J'ai fait ça en effet ! Enfin, je te conseil de regarder l'option de rsync --modify-window qui peut éviter des transferts alors que les fichiers sont les mêmes. Merci pour le conseil, je vais regarder à quoi correspond la valeur demandée par ce paramètre. Grand merci, Raphaël -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/banlktikr7vkvxleosq+1pctavosifuu...@mail.gmail.com
isc-dhcp-server sous squeeze et clients windows 7
Bonjour à tous, J'ai un serveur qui fait office de serveur dhcp via isc-dhcp-server sous squeeze. Il fonctionne très bien mais je viens de remarquer en branchant un poste sous Windows 7 que ce dernier ne prenait pas d'adresse IP. Avez vous déjà rencontré ce problème ? ma config : server-identifier monserveur; authoritative; log-facility local7; ddns-updates on; ddns-update-style interim; ddns-domainname mondomaine.fr.; shared-network data { option domain-name mondomaine.fr; option routers 192.168.1.1; option domain-name-servers 192.168.3.1; option ntp-servers 192.168.3.1; option netbios-name-servers 192.168.3.1; default-lease-time 28800; max-lease-time 5; subnet 192.168.1.0 netmask 255.255.255.0 { deny unknown-clients; } host monposteseven { hardware ethernet 00:26:9b:05:9f:ee; fixed-address 192.168.1.20; } } Dans les logs, on a : Apr 22 14:19:06 localhost dhcpd: DHCPDISCOVER from 00:26:9b:05:9f:ee via eth0.10 Apr 22 14:19:06 localhost dhcpd: DHCPOFFER on 192.168.1.20 to 00:26:9b:05:9f:ee via eth0.10 Si quelqu'un a des idées, je suis preneur... Merci d'avance, Sylvain -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/4db1924b.8010...@yahoo.fr
Re: isc-dhcp-server sous squeeze et clients windows 7
Hello, Le vendredi 22 avril 2011 à 16:35 +0200, Sylvain MEDEOT a écrit : Apr 22 14:19:06 localhost dhcpd: DHCPDISCOVER from 00:26:9b:05:9f:ee via eth0.10 Apr 22 14:19:06 localhost dhcpd: DHCPOFFER on 192.168.1.20 to 00:26:9b:05:9f:ee via eth0.10 Le Windows 7 est bien dans le vlan 10 ? Un wireshark (ou autre) sur le Windows 7 montre quoi ? le paquet DHCPOFFER arrive bien ? Bruno -- ORDRE M : Pauvre malade ! Ça te fait jouir de massacrer les fourmis ?! P : Quel massacre ? Je réprime une grève qui met en péril l'équilibre budgétaire de la fourmilière... signature.asc Description: This is a digitally signed message part
[Un peu HS] Equivalent PostgreSQL du Number d'Oracle
Bonjour, Comme c'est vendredi, veille d'un long week-end de trois jours, je tente ma question ;-) Je souhaiterais faire quelques comparaisons entre Oracle PostgreSQL. Bien évidemment, dès la reprise d'un script SQL, je tombe sur une erreur : ERREUR: le type « number » n'existe pas LIGNE 16 :( ID NUMBER(19,0), J'ai fait quelques recherches, mais il semblerait que ce ne soit pas évident. Est-ce que, par hasard, quelqu'un aurait déjà été confronté à ce problème et aurait une solution ? Merci d'avance et bonnes fêtes de Pâques. David. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110422170305.5814d30c@debian-david
[~ résolu] Re: [Un peu HS] Equivalent PostgreSQL du Number d'Oracle
Le Fri, 22 Apr 2011 17:03:05 +0200, David BERCOT deb...@bercot.org a écrit : Bonjour, Comme c'est vendredi, veille d'un long week-end de trois jours, je tente ma question ;-) Je souhaiterais faire quelques comparaisons entre Oracle PostgreSQL. Bien évidemment, dès la reprise d'un script SQL, je tombe sur une erreur : ERREUR: le type « number » n'existe pas LIGNE 16 :( ID NUMBER(19,0), Finalement, il semblerait que le NUMERIC fasse l'affaire... Désolé pour le dérangement... David. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110422172459.66468520@debian-david
voir la source des mount -n --bind
Bonjour, Avec openvz, j'utilise des mount -n --bind $src $dst On peut voir la destination dans /proc/mounts, mais comment retrouver la source utilisée ? (c'est seulement la partition de la source qui est indiquée dans /proc/mounts). -- Daniel Quatre-vingt ans, c'est l'âge de la puberté académique. Paul Claudel -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/20110422201954.3517f...@quad.lairdutemps.org
Plus d'accès à MySQL
Bonsoir, je n'ai plus d'accès à mes bases de données MySQL : # mysqlcheck all-databases mysqlcheck: Got error: 2002: Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) when trying to connect --- Impossible de les démarrer : #service mysql start et rien ne se passe, bloqué = CTRL-C Merci beaucoup d'une aide ! -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: http://lists.debian.org/201104222120.17591.cor...@free.fr
Re: Forzar entrada por SSH de un user a entrar con SCREEN.
Fanfástica explicación la de todos, voy a hacer pruebas y cuento... Por cierto, en cuanto a lo de evitar que el usuario cierre la sesión de screen ejecutando exit, ¿algún comentario?. Saludos y gracias, Ramses -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/8bd0badb-1c4e-445f-87de-af7885afc...@gmail.com
wvdial
Saludos a toda la Comunidad Debian Español Soy usuario Debian desde Lenny, antes de instalar Squeeze, me parece que se tenia que instalar algunos paquetes para poder conectarse a internet, mediante los modem zte mf 180, dichos paquetes eran: wvdial usb-modeswitch usb-modeswitch-data Dicho sea de paso, nunca me conecte desde Lenny a internet. He estado trabajando con Squeeze, ahora que conecto el modem, automáticamente me permite configurar la conexión, esto es muy bueno, pero he estado revisando y al parecer solo tengo instalados los paquetes: usb-modeswitch usb-modeswitch-data No se que cual es el paquete que sustituye a wvdial acá en Squeeze (aunque wvdial esta incluido en Squeeze pero no lo instala por defecto), me gustaría saberlo, ya que quiero tratar de optimizar mi conexión. Además me gustaría que me recomendaran una lectura, en donde pueda encontrar información sobre configuración de conexión a internet mediante modem usb. De antemano gracias. -- Carlos Alvarez
Cambiar el parámetro dpi del servidor X.
Antes, para todas las configuraciones del servidor X se utilizaba '/etc/X11/xorg.conf', como por ejemplo las configuraciones del teclado, pero ahora parece que se usa dbus pare estos menesteres. Ahora quiero cambiar el valor del parámetro dpi de Xorg, ¿hay alguna manera de realizarlo sin tocar el /etc/X11/xorg.conf?. -- Saludos --- Angel
Re: Evolution y el Navegador asociado a las URLs
El vie, 22-04-2011 a las 00:01 +0200, AngelD escribió: Wed, 20 Apr 2011, Camaleón: El Tue, 19 Apr 2011 09:52:41 +0200, AngelD escribió: En evolution, cuando me llega un correo con un enlace y pincho sobre el, éste se abre en una ventana de terminal y elinks. He tocado todo lo que se me ha ocurrido, realizando un update-alternatives --config x-www-browser, cambiando la aplicación preferida en gnome-control-center, pero sigue sin hacerme caso, abriendo los enlaces en elinks. He intentado buscar la referencia a elinks en todos los ficheros de configuración que se me han ocurrido, y el resultado ha sido nulo. ¿Dónde está la maldita referencia para poder cambiarla?. ¿Y sólo te pasa con Evolution o con cualquier aplicación? Sólo intento abrir los enlaces http que vienen con el evolution. No necesito abrir enlaces desde ninguna otra aplicación. En cuanto vuelva a la máquina (dentro de unos días), hago las pruebas. Por lo general el navegador predeterminado viene definido según el entorno gráfico que uses y se cambia de igual forma, es decir, si tienes Gnome desde las aplicaciones preferidas, con KDE desde el centro de control, etc... En WindowMaker no existe nada parecido. Se supone que las aplicaciones gnome utilizan las preferencias de gnome, las de kde, (esto y el módo de utilizar recursos remotos es lo que más me jode de la diversidad escritorios). Como Evolution es de gnome, configuré las preferencias de gnome para que fueran a Firefox, pero el resultado fue el mismo. ¿Tenías windowmaker, no? :-? Sip. Alguién tiene que seguir probando un entorno que lleva años sin evolucionar. :-DD -- Saludos --- Angel Solo un apunte,, existe un fork de WindowMaker para su continuación!!! -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303470356.2366.0.camel@pcchatarra
Re: Evolution y el Navegador asociado a las URLs
El Fri, 22 Apr 2011 00:01:17 +0200, AngelD escribió: Wed, 20 Apr 2011, Camaleón: Por lo general el navegador predeterminado viene definido según el entorno gráfico que uses y se cambia de igual forma, es decir, si tienes Gnome desde las aplicaciones preferidas, con KDE desde el centro de control, etc... En WindowMaker no existe nada parecido. Se supone que las aplicaciones gnome utilizan las preferencias de gnome, las de kde, (esto y el módo de utilizar recursos remotos es lo que más me jode de la diversidad escritorios). Como Evolution es de gnome, configuré las preferencias de gnome para que fueran a Firefox, pero el resultado fue el mismo. Ya, pero eso te funcionará si estás dentro de GNOME, cuando cargas WM ni GNOME ni KDE pueden gestionar eso, los archivos que modificas no tienen ningún efecto. Tiene que haber alguna forma de decirle a WM qué aplicaciones quieres cargar... mira, este mensaje te podría dar alguna pista: Re: No way to set default applications... http://lists.windowmaker.info/dev/msg00365.html Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.11.16...@gmail.com
Re: wvdial
El Fri, 22 Apr 2011 02:21:20 -0600, Carlos Alvarez escribió: (...) No se que cual es el paquete que sustituye a wvdial acá en Squeeze (aunque wvdial esta incluido en Squeeze pero no lo instala por defecto), me gustaría saberlo, ya que quiero tratar de optimizar mi conexión. Puedes instalar wvdial, sigue estando disponible y es de los marcadores que mejor funcionan. Otra opción sería intentar configurar NetworkManager pero sinceramente, nunca he logrado que pudiera manejar el módem HSDPA ;-( Además me gustaría que me recomendaran una lectura, en donde pueda encontrar información sobre configuración de conexión a internet mediante modem usb. http://wiki.debian.org/Modem Pero instalar estos aparatos suele ser muy sencillo, básicamente que te detecte el módem como tal (y no como unidad de almacenamiento) y configurar los parámetros del marcador para poder salir a Internet. Y poco más :-) Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.11.27...@gmail.com
Re: Cambiar el parámetro dpi del servidor X.
El Fri, 22 Apr 2011 10:34:52 +0200, AngelD escribió: Antes, para todas las configuraciones del servidor X se utilizaba '/etc/X11/xorg.conf', como por ejemplo las configuraciones del teclado, pero ahora parece que se usa dbus pare estos menesteres. Ahora quiero cambiar el valor del parámetro dpi de Xorg, ¿hay alguna manera de realizarlo sin tocar el /etc/X11/xorg.conf?. ¿Por qué no quieres tocar los archivos de configuración de xorg? :-? De nuevo te digo que de eso se encarga el entorno gráfico, y si tienes window maker, tendrás que o bien configurarlo desde ahí (si WM lo permite) o bien tirar de xorg :-P En GNOME lo puedes definir desde el editor de configuración (clave: / desktop/gnome/font_rendering/dpi valor: 96) pero ya te digo, ¿respetará/aplicará WM esta configuración? Otra opción sería intentar pasarle el parámetro al iniciarlo, p. ej., con startx: startx WindowMaker -- -dpi 96 Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.11.37...@gmail.com
Re: [OT] El smtp de Gmail (era: icedove no me descarga los mensajes que yo envío a la lista)
El Thu, 21 Apr 2011 20:49:38 -0430, Juan Lavieri escribió: El 21/04/11 12:30, Camaleón escribió: ¿Con qué finalidad, si no es indiscreción? :-? Por lo mismo que dijiste en el párrafo anterior. (...) Pero es que no vas a poder :-P De nada sirve que te envíes una copia a ti mismo porque no pasará por el servidor de la lista, es directo, y seguramente Gmail volverá a hacer lo mismo (eliminará el original y te mantendrá el local). Con IMAP no te descarga nada, los mensajes se quedan en el servidor hasta que decidas borrarlos. Si activas el IMAP, desde el cliente de correo verás las carpetas tal cual las tienes en el webmail, bandeja de entrada (inbox), todos, enviados, borradores... y te podrás suscribir (recibir notificaciones) de las que quieras. Me parece que voy a tener que leer sobre IMAP, de verdad no tengo idea de como funciona... El día debería tener unas 43 horas para que alcancen para todo; es mucho lo que hay que aprender. IMAP es similar al webmail con la ventaja de que puedes copiar los mensajes que quieras a tu disco duro para mantener una copia local de los correos (emulando al POP3). [OT] Por cierto ¡!¡Felicidades a los madrilistas!!! o como quiera que se llamen. Ya era hora ¿no? Sip, bueno, la verdad es que desde mi punto de vista creo que jugaron mejor. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.11.23...@gmail.com
Re: Cambiar el parámetro dpi del servidor X.
Fri, 22 Apr 2011, Camaleón: El Fri, 22 Apr 2011 10:34:52 +0200, AngelD escribió: Antes, para todas las configuraciones del servidor X se utilizaba '/etc/X11/xorg.conf', como por ejemplo las configuraciones del teclado, pero ahora parece que se usa dbus pare estos menesteres. Ahora quiero cambiar el valor del parámetro dpi de Xorg, ¿hay alguna manera de realizarlo sin tocar el /etc/X11/xorg.conf?. ¿Por qué no quieres tocar los archivos de configuración de xorg? :-? Si se ha eliminado la configuración del teclado de éste fichero, se podrán elininar otras configuraciones. De nuevo te digo que de eso se encarga el entorno gráfico, y si tienes window maker, tendrás que o bien configurarlo desde ahí (si WM lo permite) o bien tirar de xorg :-P No lo permite, y la idea es tirar de Xorg sin xorg.conf En GNOME lo puedes definir desde el editor de configuración (clave: / desktop/gnome/font_rendering/dpi valor: 96) pero ya te digo, ¿respetará/aplicará WM esta configuración? No, no la respeta. Otra opción sería intentar pasarle el parámetro al iniciarlo, p. ej., con startx: No es una opción. -- Saludos --- Angel
Re: OpenOffice 3.3 [desẗrolliandonos]
Por mucho menos que esto es para que te eliminen en la lista. Que le pasa al administrador de la lista que no le pone coto a esto? Hasta cuando tendremos que estar recibiendo este tipo de mensaje? Habla inglés, es yanky y no simpatiza con los *.cu -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTimgoi+kwAp+s7o4HFj--Zo6=p5...@mail.gmail.com
Re: Forzar entrada por SSH de un user a entrar con SCREEN.
2011/4/22 Ramses ramses.sevi...@gmail.com Fanfástica explicación la de todos, voy a hacer pruebas y cuento... Por cierto, en cuanto a lo de evitar que el usuario cierre la sesión de screen ejecutando exit, ¿algún comentario?. Saludos y gracias, Ramses Porque no usas 'script' es para loguear, tirando de tail -f puedes verlo en tiempo real... (no soy partidario de sudo, no nos soportamos ni él a mi ni yo a él... feeling) -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/8bd0badb-1c4e-445f-87de-af7885afc...@gmail.com -:- j0d3 David Guillermo Rodriguez Gentoo Base System GNU/Linux e-mail: jode...@gmail.com http://j0d3.blogspot.com *Entre todos podemos poner fin a adjuntos de ficheros en formato Word/Microsoft Word.http://www.gnu.org/philosophy/no-word-attachments.es.html * Modelo de CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ Kernel: 2.6.37-rc2 Linux user #408522 -:-
Re: OpenOffice 3.3 [desẗrolliandonos]
- Original Message - From: Horacio horacio9...@gmail.com To: Debian Lista debian-user-spanish@lists.debian.org Sent: Friday, April 22, 2011 8:39 AM Subject: Re: OpenOffice 3.3 [desẗrolliandonos] Por mucho menos que esto es para que te eliminen en la lista. Que le pasa al administrador de la lista que no le pone coto a esto? Hasta cuando tendremos que estar recibiendo este tipo de mensaje? Habla inglés, es yanky y no simpatiza con los *.cu -- Talves porque hemos sido los únicos que le dimos por dande el dijo y tuvieron que salir de aquí con eso dentro de las patas, ahora recientemente conmemoramos un aniversario más de la derrota de playa girón y hemos sido referencia para el resto del mundo por muchos años. Ellos que proclaman la libertad nos impiden que descargemos hasta los soft completamente libres bloqueando sus páginas de descarga. Un ejemplo muy claro está en sourceforgue o Java. Saludos Cordiales = || ISMAEL || = -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BF4BA79CEB3C4F91B1F52BD446BD7549@virpc05
Re: Cambiar el parámetro dpi del servidor X.
El Fri, 22 Apr 2011 14:37:32 +0200, AngelD escribió: Fri, 22 Apr 2011, Camaleón: ¿Por qué no quieres tocar los archivos de configuración de xorg? :-? Si se ha eliminado la configuración del teclado de éste fichero, se podrán elininar otras configuraciones. No entiendo... aún sigue siendo posible configurar manualmente los parámetros de Xorg mediante el (o los) archivo de configuración. No se ha eliminado nada :-? De nuevo te digo que de eso se encarga el entorno gráfico, y si tienes window maker, tendrás que o bien configurarlo desde ahí (si WM lo permite) o bien tirar de xorg :-P No lo permite, y la idea es tirar de Xorg sin xorg.conf Pus si WM no lo permite y no quieres tirar de Xorg ¿cómo piensas hacerlo? :-) En GNOME lo puedes definir desde el editor de configuración (clave: / desktop/gnome/font_rendering/dpi valor: 96) pero ya te digo, ¿respetará/aplicará WM esta configuración? No, no la respeta. Otra opción sería intentar pasarle el parámetro al iniciarlo, p. ej., con startx: No es una opción. ¿Por algún motivo en concreto? Tiene que haber algún archivo en WM donde se pueda definir los parámetros de inicio y por ende, establecer el valor del dpi. Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.14.42...@gmail.com
Re: OpenOffice 3.3 [desẗrolliandonos]
El día 22 de abril de 2011 08:39, Horacio horacio9...@gmail.com escribió: Por mucho menos que esto es para que te eliminen en la lista. Que le pasa al administrador de la lista que no le pone coto a esto? Hasta cuando tendremos que estar recibiendo este tipo de mensaje? Habla inglés, es yanky y no simpatiza con los *.cu 33 mensajes a la lista en 6 años y te atreves a escribir esto. Que estupideces hay que leer de vez en cuando por aquí. usuario linux #274354 normas de la lista: http://wiki.debian.org/NormasLista como hacer preguntas inteligentes: http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTikqb3NWXn2Xu8Kgy9ÿfrtnw+...@mail.gmail.com
Re: OpenOffice 3.3 [desẗrolliandonos]
El día 22 de abril de 2011 09:16, Ismael L. Donis García ism...@citricos.co.cu escribió: - Original Message - From: Horacio horacio9...@gmail.com To: Debian Lista debian-user-spanish@lists.debian.org Sent: Friday, April 22, 2011 8:39 AM Subject: Re: OpenOffice 3.3 [desẗrolliandonos] Por mucho menos que esto es para que te eliminen en la lista. Que le pasa al administrador de la lista que no le pone coto a esto? Hasta cuando tendremos que estar recibiendo este tipo de mensaje? Habla inglés, es yanky y no simpatiza con los *.cu -- Talves porque hemos sido los únicos que le dimos por dande el dijo y tuvieron que salir de aquí con eso dentro de las patas, ahora recientemente conmemoramos un aniversario más de la derrota de playa girón y hemos sido referencia para el resto del mundo por muchos años. Cuendo expreses mejor la idea tal vez pueda entenderte. Ellos que proclaman la libertad nos impiden que descargemos hasta los soft completamente libres bloqueando sus páginas de descarga. Un ejemplo muy claro está en sourceforgue o Java. Y acaso ustedes tiene los dedos crespos? como decimos por acá, se les ha ofrecido ayuda hasta el cansancio, incluso para crear un repo local, son ustedes los que deben abrirse al mundo, que no puden tirar de sourceforge, pues no lo usen, que no hay java, pues no lo usen, desarrollen ustedes mismos lo que necesitan, tienen las herramientas, pues ahora usenlas, ¿que más quieren? ¿Libertad? No es a la lista la que deben reclamar eso, ustedes saben bien a quien deben reclamar, ahora si no la hacen, no pueden o no saben, no es problema nuestro. Por favor ya paren con el llanterío, así como se levantaron el 59 no veo como no lo hacen ahora. Disculpen si ofendí a alguién, no ha sido mi intención. Saludos y suerte. -- usuario linux #274354 normas de la lista: http://wiki.debian.org/NormasLista como hacer preguntas inteligentes: http://www.sindominio.net/ayuda/preguntas-inteligentes.html -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTikuopLqCyHd=ovlaysuveuuqk8...@mail.gmail.com
Re: OpenOffice 3.3 [desẗrolliandonos]
On Viernes 22 Abril 2011 15:16:05 Ismael L. Donis García escribió: Habla inglés, es yanky y no simpatiza con los *.cu -- Ismael por mucho que te joda este comportamiento ofensivo e insultante no respondas a los trolls por cierto el listmaster es un grupo y no hay ningun yanqui que yo sepa. Listo. Que viva playa giron, Una buena golpe en todos los morros a los gusanos y los putos yanquis. Un abrazo BasaBuru -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201104221836.42912.basab...@basatu.org
Re: Forzar entrada por SSH de un user a entrar con SCREEN.
El día 21 de abril de 2011 23:35, Raul Hormazabal rhorm...@gmail.com escribió: 2011/4/21 Ramses ramses.sevi...@gmail.com El tema es que para conectarme a esa sesión tengo que estar logado con el mismo user y hacer un screen -x o ver el listado y conectar a la que quiera. ¿No podría hacerlo desde otro user? screen permite reattach a window por differentes usuarios...hechele un vistazo a la documentacion official.. http://www.gnu.org/software/screen/manual/screen.html#Multiuser-Session Yo te driría que uses sudo, en debian para instalarlo: # apt-get install sudo Vos podés crear un usuario normal, sin grupo root, y que ese usuario este en la lista de sudoers (/etc/sudoers), ahí podés agregar a un usuario en particular, o todo un grupo anteponiendo %, podes porjemplo crear un grupo admins: # groupadd admins y luego asignarlo como grupo al usuario en cuestion: # usermod -G admins Y en /etc/sudoers pone: %admins ALL=(ALL) ALL de esa forma el usuario ya va a poder usar el comando sudo, con su contraseña para ejecutar comandos en modo root, si en el archivo de inicio le ponés: sudo screen Estaria arrancando screens como root, lo malo es que el usuario después de loguearse tendría que poner nuevamente su contraseña. Ya para ver las sesiones abiertas solo listas las de usuario root. Si querés tenes un control mas sobre usuario podes arrancar el screen sin sudo (y que el usuario tenga que usarlo una vez ya logueado)., para ejecutar screen con ese usuario, desde otro, preferentemente root, podes usar su: # su -c usuario screen -x El parametro -c ejecuta un programa con el usuario pedido, en caso de ser root, no te va a pedir password, en caso de hacerlo desde otro usuario vas a tener que saber el pass de ese usuario, y hay sitemas que no lo permiten como FreeBSD donde si o si tenes que ser Root para eejcutar su con el parametro -c. Buenas, Creo que lo he hecho todo tal como comentaban: - Crear el user pruebas - Crear el group admin - Hacer pertenecer pruebas al grupo admin - Meter en el /etc/sudoers el grupo admin con lo del ALL - En el bash de pruebas lo de: sudo screen -S Support Me conecto con el user pruebas y me inicia el screen con la sesión Support. Hasta ahí, todo bien. Ahora, inicio, por ejemplo, una sesión con root y hago un: su pruebas -c screen -ls Y me lista la sesión Support. Pero cuando hago un: su pruebas -c screen -r Support Me da un error diciendo algo así como: Cannot open your terminal '/dev/pst/5'. Check O algo así. ¿Donde me he perdido? ¿Tengo que hacer pertenecer el user pruebas a más grupos? Saludos y gracias, Ramses -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/98595866-1c62-48cd-829d-397679a0f...@gmail.com
Re: Evolution y el Navegador asociado a las URLs
Fri, 22 Apr 2011, Camaleón: El Fri, 22 Apr 2011 00:01:17 +0200, AngelD escribió: Wed, 20 Apr 2011, Camaleón: Por lo general el navegador predeterminado viene definido según el entorno gráfico que uses y se cambia de igual forma, es decir, si tienes Gnome desde las aplicaciones preferidas, con KDE desde el centro de control, etc... En WindowMaker no existe nada parecido. Se supone que las aplicaciones gnome utilizan las preferencias de gnome, las de kde, (esto y el módo de utilizar recursos remotos es lo que más me jode de la diversidad escritorios). Como Evolution es de gnome, configuré las preferencias de gnome para que fueran a Firefox, pero el resultado fue el mismo. Ya, pero eso te funcionará si estás dentro de GNOME, cuando cargas WM ni GNOME ni KDE pueden gestionar eso, los archivos que modificas no tienen ningún efecto. Tiene que haber alguna forma de decirle a WM qué aplicaciones quieres cargar... mira, este mensaje te podría dar alguna pista: Re: No way to set default applications... http://lists.windowmaker.info/dev/msg00365.html Ya veo, utilizando variables de entorno. En cuanto pueda lo pruebo y comento el resultado. -- Saludos --- Angel
Re: Evolution y el Navegador asociado a las URLs
Fri, 22 Apr 2011, Usuario Debian: El vie, 22-04-2011 a las 00:01 +0200, AngelD escribió: Wed, 20 Apr 2011, Camaleón: El Tue, 19 Apr 2011 09:52:41 +0200, AngelD escribió: En evolution, cuando me llega un correo con un enlace y pincho sobre el, éste se abre en una ventana de terminal y elinks. He tocado todo lo que se me ha ocurrido, realizando un update-alternatives --config x-www-browser, cambiando la aplicación preferida en gnome-control-center, pero sigue sin hacerme caso, abriendo los enlaces en elinks. He intentado buscar la referencia a elinks en todos los ficheros de configuración que se me han ocurrido, y el resultado ha sido nulo. ¿Dónde está la maldita referencia para poder cambiarla?. ¿Y sólo te pasa con Evolution o con cualquier aplicación? Sólo intento abrir los enlaces http que vienen con el evolution. No necesito abrir enlaces desde ninguna otra aplicación. En cuanto vuelva a la máquina (dentro de unos días), hago las pruebas. Por lo general el navegador predeterminado viene definido según el entorno gráfico que uses y se cambia de igual forma, es decir, si tienes Gnome desde las aplicaciones preferidas, con KDE desde el centro de control, etc... En WindowMaker no existe nada parecido. Se supone que las aplicaciones gnome utilizan las preferencias de gnome, las de kde, (esto y el módo de utilizar recursos remotos es lo que más me jode de la diversidad escritorios). Como Evolution es de gnome, configuré las preferencias de gnome para que fueran a Firefox, pero el resultado fue el mismo. ¿Tenías windowmaker, no? :-? Sip. Alguién tiene que seguir probando un entorno que lleva años sin evolucionar. :-DD Solo un apunte,, existe un fork de WindowMaker para su continuación!!! Desconocía de su [1]existencia, y ya lo estoy probando. No parece que haya grandes cambios respecto a la versión normal, sino un intento de mantener solucionar algunos pequeños problemas y errores. [1]http://repo.or.cz/w/wmaker-crm.git -- Saludos --- Angel
Re: Hilo Nuevo. Servidores en Debian
El 22 de abril de 2011 02:25, BasaBuru basab...@basatu.org escribió: On Viernes 22 Abril 2011 06:56:24 Tio Oscar escribió: aupa: Lo que si podés hacer como salida rapida a esto, es pedir una maquina de bajos recursos (una viejita que ande, o una nueva no muy poderosa tipo atom) y montar un firewall, poniéndolo adelante en la red, de esa forma puedes natear o proxear (vervos del oficio) los servicios hacia los servidores y maquinas ya existentes, por ejemplo, internet podria recaer en este FW y de ahí ir al resto de las maquinas, el pueto 80 por ejemplo natearlo al 80 de la maquina con win y de esa forma el server seguiria andando pero desde atras de una maquina con Debian (segura). Una muy buena solución es soekris. Diseñado especificamente para esto del firewall. http://soekris.com/ nosotros la usabamos con openbsd, las reglas de filtrado son mucho más faciles que con iptables. Y es mas seguro que debian :wq! ZZ :-) Un saludo BasaBuru -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201104220725.16483.basab...@basatu.org Yo hace muchos años atras usaba Coyote[1], que era un distro especializada para firewall y tenia la ventaja de arrancar en desde un disquete, sin disco, (en esas epocas las live no existian), asi que una mother, ram, 2 placas de red y una disquetera y teníamos un firewall, fácil de configurar y hermoso, jejeje. Despues los router por hardware se hicieron mas baratos y se me quedo como vieja la distro, jeje, hasta esta Flisol donde me comentaron que tenían un coyotelinux andando (desde livecd), la verdad ahora no se como andará pero en su epoca era un cañito. 1: http://www.coyotelinux.com/ -- El Tio ~ Programador, hacker y filósofo Blog: http://blog.exodica.com.ar Linked'in: http://www.linkedin.com/in/ogentilezza Tel: [+54 11] 638-LINUX (54689) Movil: [+54 9 11] - vi vi vi - The number of the Beast!!! :wq!
Re: Cambiar el parámetro dpi del servidor X.
Fri, 22 Apr 2011, Camaleón: El Fri, 22 Apr 2011 14:37:32 +0200, AngelD escribió: Fri, 22 Apr 2011, Camaleón: ¿Por qué no quieres tocar los archivos de configuración de xorg? :-? Si se ha eliminado la configuración del teclado de éste fichero, se podrán elininar otras configuraciones. No entiendo... aún sigue siendo posible configurar manualmente los parámetros de Xorg mediante el (o los) archivo de configuración. No se ha eliminado nada :-? De nuevo te digo que de eso se encarga el entorno gráfico, y si tienes window maker, tendrás que o bien configurarlo desde ahí (si WM lo permite) o bien tirar de xorg :-P No lo permite, y la idea es tirar de Xorg sin xorg.conf Pus si WM no lo permite y no quieres tirar de Xorg ¿cómo piensas hacerlo? :-) En GNOME lo puedes definir desde el editor de configuración (clave: / desktop/gnome/font_rendering/dpi valor: 96) pero ya te digo, ¿respetará/aplicará WM esta configuración? No, no la respeta. Otra opción sería intentar pasarle el parámetro al iniciarlo, p. ej., con startx: No es una opción. ¿Por algún motivo en concreto? No utiliza startx. Logearme en consola para lanzar el entorno gráfico no es una opción que me resulte válida. Tiene que haber algún archivo en WM donde se pueda definir los parámetros de inicio y por ende, establecer el valor del dpi. Esto lo hace gdm3, pero no encuentro por ningún lado donde poner los parámetros. Si miro la línea que lanza gdm3 dice: /usr/bin/Xorg :0 -br -verbose -audit 0 -novtswitch -auth /var/run/gdm3/auth-for-Debian-gdm-xu6F5e/database -nolisten tcp vt8 pero, ¿dónde están definidos éstos?. No los encuantro ni en /etc ni en /var/lib/gdm3 (home de gdm3). -- Saludos --- Angel
RE:mensajeria instantanea modo texto
hola amigos . estoy probando la mensajería instantánea en modo texto para eso instale finch , que según tengo entendido es pidgin desde consola o algo así el punto es que cuando me conecto me sale este mensaje y no se a que se refiere. si alguien sabe puede ayudarme ?
RE: mensajería instantánea modo texto
│hola amigos . estoy probando la mensajería instantánea en modo texto para eso instale finch , que según tengo entendido es pidgin desde consola o algo así el punto es que cuando me conecto me sale este mensaje (Finch:2001): pidgin-libnotify-plugin-DEBUG: Successfully wrote blacklist file to /home/himer/.config/indicators/messages/applications-blacklist/pidgin-libnotify y no se a que se refiere. si alguien sabe puede ayudarme ?
Re: OpenOffice 3.3 [desẗrolliandonos]
El viernes 22 de abril de 2011, BasaBuru basab...@basatu.org escribió: On Viernes 22 Abril 2011 15:16:05 Ismael L. Donis García escribió: Habla inglés, es yanky y no simpatiza con los *.cu -- Este comentario fue una tremenda estupidez. Ahora, los cubanos no se quejen, ya que la mayoría de las páginas que no pueden acceder están bloqueadas desde de tro de Cuba y no desde afuera, son ustedes que no pueden salir y no que contenido no pueda entrar. Nada mas lejano de mi intención que dedendar a los yankees, que no se malinterprete. Saludos Juan -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTi=pqf-8vkj8n1n5pruzewsyvrb...@mail.gmail.com
Re: OpenOffice 3.3
El día 20 de abril de 2011 21:44, consul tores consultor...@gmail.com escribió: El día 19 de abril de 2011 22:31, Alejandro Pando Garate constructora.pa...@gmail.com escribió: para usuarios inteligentes Reflautas... mañana mismo me hago un test de inteligencia... ¿cuanto CI se exige? Hola Alejandro Pando Como facilmente te daras cuenta, tu hablas otro lenguaje; dices en otro correo cuando inicio debian en forma libre de fallos o algo asi; tambien dices Cuanto CI se exige; otra persona dira en nombre de la lista, otro mas dira esta es una lista de ayuda y asi hasta el infinito. Este lenguaje, se conoce como NO inteligente o ausente de sentido comun. Desde hace varios anos, tu actitud ha sido siempre de lamentaciones y quejas, de hecho te quejas por lo que no es tuyo, y por todo; tal parece que hechas de menos tu windows, usas expresiones que se usan en windows pero no en Debian arrancar a prueba de fallos, No te es posible usar el sentido comun ni la inteligencia, debido a que solo repites todo lo que has escuchado sin ni siquiera revisarlo; hablas de respeto y mandas spam como se te antoja; pretendes que los demas te obedezcan, como si eso fuera posible; hablas de insultos, y no tienes ni idea de lo que es eso (o acaso no es un insulto a la inteligencia quejarse de Debian y seguirse sirviendo de el?; hablas de moderador, con la insana idea de promoverlo, es que te hace falta quien te diga que debes hacer?; en fin, actualmente, tenemos en la lista un nivel bajo de inteligencia verdadera y tambien de sentido comun. Si queremos cambiar el todo, cambiemos primero las partes! -- Consultores Agropecuarios. Administracion, Produccion, Capacitacion. -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktij7h3pgzarwgp2c7dahpnxr0p...@mail.gmail.com Cual es la idea de seguir algo que ya trilla!! de verdad si los que tuvieron disposición de ayudar contestaron la duda del usuario, cual es la lógica de que otros manden mensajes desvirtuando el tema principal que es responde runa simple duda y ayuda, el que encuentra que es una tontera, que se exprese pero que deje de darle vuelta al punto- Saludos Cordiales. -- Roberto Quiñones Owner - Service Manager and System ACShell.NET – Internet Services robe...@acshell.net - www.acshell.net San Martin #311 Santiago – CL (Chile) +560981361713 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktim_o8t2vmp0zsgrgckt4bpjfpn...@mail.gmail.com
Re: Placa Atheros como AP
Q Em 22 de abril de 2011 02:18, tux tux_lit...@yahoo.com escreveu: Em Sexta-feira 22 Abril 2011, às 00:50:28, Moksha Tux escreveu: Querido Hélio muito obrigado pela resposta! observando a leitura do arquivo que vc me orientou primeiramente aparece isso: pr 20 13:42:01 router kernel: [222653.554393] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:42:44 router kernel: [222696.003130] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:42:52 router kernel: [222704.699810] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:42:52 router kernel: [222704.763835] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:43:24 router kernel: [222736.678546] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:43:27 router kernel: [222739.618334] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:43:37 router kernel: [222749.741859] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:48:20 router kernel: [223032.507520] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 depois aparece isso: Apr 20 22:40:32 router kernel: [254964.820002] [ cut here ] Apr 20 22:40:32 router kernel: [254964.820002] WARNING: at net/sched/sch_generic.c:222 dev_watchdog+0xa6/0xfb() Apr 20 22:40:32 router kernel: [254964.820002] Modules linked in: wlan_wep bridge wlan_scan_ap ipt_REDIRECT ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_filter xt_TCPMSS xt_tcpmss xt_tcpudp iptable_mangle ip_tables x_tables pppoe pppox ppp_generic slhc ipv6 loop wlan_scan_sta ath_rate_sample ath_pci wlan ath_hal(P) parport_pc parport snd_pcsp k8temp shpchp pci_hotplug snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc button i2c_nforce2 i2c_core evdev ext3 jbd mbcache ide_cd_mod cdrom ide_disk ata_generic sata_nv libata scsi_mod dock 3c59x mii ide_pci_generic amd74xx ide_core forcedeth ehci_hcd ohci_hcd thermal processor fan thermal_sys [last unloaded: scsi_wait_scan] Apr 20 22:40:32 router kernel: [254964.820002] Pid: 0, comm: swapper Tainted: P 2.6.26-2-amd64 #1 Apr 20 22:40:32 router kernel: [254964.820002] Apr 20 22:40:32 router kernel: [254964.820002] Call Trace: Apr 20 22:40:32 router kernel: [254964.820002] IRQ [80234958] warn_on_slowpath+0x51/0x7a Apr 20 22:40:32 router kernel: [254964.820002] [a01f870f] :ath_hal:zz00057cd9+0x150/0x15f Apr 20 22:40:32 router kernel: [254964.820002] [a01e3e33] :ath_hal:ath_hal_process_noisefloor+0x14d/0x2fa1 Apr 20 22:40:32 router kernel: [254964.820002] [a01e3c91] :ath_hal:zz7c1a+0x1d/0x72 Apr 20 22:40:32 router kernel: [254964.820002] [a02953d3] :ath_pci:ath_set_ack_bitrate+0x226/0x233 Apr 20 22:40:32 router kernel: [254964.820002] [a0276b13] :ath_pci:ath_reset+0x2c8/0x314 Apr 20 22:40:32 router kernel: [254964.820002] [803ccc32] dev_watchdog+0x0/0xfb Apr 20 22:40:32 router kernel: [254964.820002] [803cccd8] dev_watchdog+0xa6/0xfb Apr 20 22:40:32 router kernel: [254964.820002] [803ccc32] dev_watchdog+0x0/0xfb Apr 20 22:40:32 router kernel: [254964.820002] [8023ca01] run_timer_softirq+0x16a/0x1e2 Apr 20 22:40:32 router kernel: [254964.820002] [802393cd] __do_softirq+0x5c/0xd1 Apr 20 22:40:32 router kernel: [254964.820002] [8020d2dc] call_softirq+0x1c/0x28 Apr 20 22:40:32 router kernel: [254964.820002] [8020f3e8] do_softirq+0x3c/0x81 Apr 20 22:40:32 router kernel: [254964.820002] [8023932b] irq_exit+0x3f/0x85 Apr 20 22:40:32 router kernel: [254964.820002] [8021aaab] smp_apic_timer_interrupt+0x8c/0xa4 Apr 20 22:40:32 router kernel: [254964.820002] [8020b0ae] default_idle+0x0/0x46 Apr 20 22:40:32 router kernel: [254964.820002] [8020cd02] apic_timer_interrupt+0x72/0x80 Apr 20 22:40:32 router kernel: [254964.820002] EOI [8021a857] lapic_next_event+0x0/0x13 Apr 20 22:40:32 router kernel: [254964.820002] [8021eb64] native_safe_halt+0x2/0x3 Apr 20 22:40:32 router kernel: [254964.820002] [8020b0d8] default_idle+0x2a/0x46 e em seguida fica tudo assim: Apr 20 22:40:32 router kernel: [254964.820002] ---[ end trace 6ab9d78664740dd3 ]--- Apr 20 22:40:42 router kernel: [254974.816007] NETDEV WATCHDOG: wifi0: transmit timed out Apr 20 22:40:52 router kernel: [254984.816008] NETDEV WATCHDOG: wifi0: transmit timed out Apr 20 22:41:02 router kernel: [254994.816007] NETDEV WATCHDOG: wifi0: transmit timed out Apr 20 22:41:17 router kernel: [255009.816007] NETDEV WATCHDOG:
Re: Placa Atheros como AP
Querido Tux! Muito obrigado pela sua ajuda e resposta ,vou prosseguir com as suas sugestões pra ver se dá certo. quanto ao hostapd eu tentei inúmeros tutoriais da rede e não fui bem sucedido em nenhum, me parece ser um conjunto de coisas que terei que obedecer cada passo. Vc teria algum tutorial em que vc mesmo tenha usado no seu ambiente e que esteja em produção agora? Agradeceria muito essa ajuda. Abraços, Moksha Em 22 de abril de 2011 02:18, tux tux_lit...@yahoo.com escreveu: Em Sexta-feira 22 Abril 2011, às 00:50:28, Moksha Tux escreveu: Querido Hélio muito obrigado pela resposta! observando a leitura do arquivo que vc me orientou primeiramente aparece isso: pr 20 13:42:01 router kernel: [222653.554393] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:42:44 router kernel: [222696.003130] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:42:52 router kernel: [222704.699810] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:42:52 router kernel: [222704.763835] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:43:24 router kernel: [222736.678546] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:43:27 router kernel: [222739.618334] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:43:37 router kernel: [222749.741859] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 Apr 20 13:48:20 router kernel: [223032.507520] UDP: bad checksum. From 186.214.57.238:33622 to 187.14.17.118:61642 ulen 1446 depois aparece isso: Apr 20 22:40:32 router kernel: [254964.820002] [ cut here ] Apr 20 22:40:32 router kernel: [254964.820002] WARNING: at net/sched/sch_generic.c:222 dev_watchdog+0xa6/0xfb() Apr 20 22:40:32 router kernel: [254964.820002] Modules linked in: wlan_wep bridge wlan_scan_ap ipt_REDIRECT ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack iptable_filter xt_TCPMSS xt_tcpmss xt_tcpudp iptable_mangle ip_tables x_tables pppoe pppox ppp_generic slhc ipv6 loop wlan_scan_sta ath_rate_sample ath_pci wlan ath_hal(P) parport_pc parport snd_pcsp k8temp shpchp pci_hotplug snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_timer snd soundcore snd_page_alloc button i2c_nforce2 i2c_core evdev ext3 jbd mbcache ide_cd_mod cdrom ide_disk ata_generic sata_nv libata scsi_mod dock 3c59x mii ide_pci_generic amd74xx ide_core forcedeth ehci_hcd ohci_hcd thermal processor fan thermal_sys [last unloaded: scsi_wait_scan] Apr 20 22:40:32 router kernel: [254964.820002] Pid: 0, comm: swapper Tainted: P 2.6.26-2-amd64 #1 Apr 20 22:40:32 router kernel: [254964.820002] Apr 20 22:40:32 router kernel: [254964.820002] Call Trace: Apr 20 22:40:32 router kernel: [254964.820002] IRQ [80234958] warn_on_slowpath+0x51/0x7a Apr 20 22:40:32 router kernel: [254964.820002] [a01f870f] :ath_hal:zz00057cd9+0x150/0x15f Apr 20 22:40:32 router kernel: [254964.820002] [a01e3e33] :ath_hal:ath_hal_process_noisefloor+0x14d/0x2fa1 Apr 20 22:40:32 router kernel: [254964.820002] [a01e3c91] :ath_hal:zz7c1a+0x1d/0x72 Apr 20 22:40:32 router kernel: [254964.820002] [a02953d3] :ath_pci:ath_set_ack_bitrate+0x226/0x233 Apr 20 22:40:32 router kernel: [254964.820002] [a0276b13] :ath_pci:ath_reset+0x2c8/0x314 Apr 20 22:40:32 router kernel: [254964.820002] [803ccc32] dev_watchdog+0x0/0xfb Apr 20 22:40:32 router kernel: [254964.820002] [803cccd8] dev_watchdog+0xa6/0xfb Apr 20 22:40:32 router kernel: [254964.820002] [803ccc32] dev_watchdog+0x0/0xfb Apr 20 22:40:32 router kernel: [254964.820002] [8023ca01] run_timer_softirq+0x16a/0x1e2 Apr 20 22:40:32 router kernel: [254964.820002] [802393cd] __do_softirq+0x5c/0xd1 Apr 20 22:40:32 router kernel: [254964.820002] [8020d2dc] call_softirq+0x1c/0x28 Apr 20 22:40:32 router kernel: [254964.820002] [8020f3e8] do_softirq+0x3c/0x81 Apr 20 22:40:32 router kernel: [254964.820002] [8023932b] irq_exit+0x3f/0x85 Apr 20 22:40:32 router kernel: [254964.820002] [8021aaab] smp_apic_timer_interrupt+0x8c/0xa4 Apr 20 22:40:32 router kernel: [254964.820002] [8020b0ae] default_idle+0x0/0x46 Apr 20 22:40:32 router kernel: [254964.820002] [8020cd02] apic_timer_interrupt+0x72/0x80 Apr 20 22:40:32 router kernel: [254964.820002] EOI [8021a857] lapic_next_event+0x0/0x13 Apr 20 22:40:32 router kernel: [254964.820002] [8021eb64] native_safe_halt+0x2/0x3 Apr 20 22:40:32 router kernel: [254964.820002] [8020b0d8] default_idle+0x2a/0x46 e em seguida fica tudo assim: Apr 20 22:40:32
Re: Wireless kurulum desteği
Merhaba yeniden, Özellikle firmware-iwlwifi paketinin yüklü olduğuna emin misiniz acaba? Gözünüzden kaçmış olabilir çünkü şu aşağıdaki adrese bakarsanız aynı hatayı bu paketi kurmadığı için almışlar. http://doctus.org/showthread.php?t=50676 firmware-iwlwifi paketini yüklemek için squeeze main contrib non-free depolarının da aktif olması gerekiyor. Yani /etc/apt/sources.list dosyası içerisinde deb http://ftp.de.debian.org/debian/ squeeze main contrib non-free deb-src http://ftp.de.debian.org/debian/ squeeze main contrib non-free depolarıda görünmeli (başında # işareti varsa kaldırın). Sonra sudo yüklenmişse; sudo apt-get update sudo apt-get install firmware-iwlwifi Sudo kullanmıyorsanız da: su apt-get update apt-get install firmware-iwlwifi dediğinizde aynı yolla ya da belki fazladan bir şey yapmanıza gerek kalmadan wireless'ınızı kullanabilmeniz lazım. 21-04-2011 16:20, Mehmet AK yazmış: Selam . aşağıda en son sonuçlar mevcut mehmetak:/home/mehmet# modprobe iwlagn mehmetak:/home/mehmet# iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off pan0 no wireless extensions. vboxnet0 no wireless extensions. mehmetak:/home/mehmet# ifconfig wlan0 up SIOCSIFFLAGS: Böyle bir dosya ya da dizin yok Date: Wed, 20 Apr 2011 23:18:57 +0300 From: rama...@evdoxia.net To: debian-user-turkish@lists.debian.org CC: ak.meh...@windowslive.com Subject: Re: virtualBox kurulum hakkında yardım isteği Merhaba, Intel marka bir wireless kartınız varsa ışık yansada sürücüleri yüklemeden çalışmayacaktır. Bunun için öncelikle: apt-get install firmware-iwlwifi wireless-tools ile iwlang yüklemesi yapmanız lazım. Gerekli kernel modülü yüklenecektir ama eğer aktifleşmiyorsa: modprobe iwlagn ile çalıştırabilirsiniz. Daha sonra, iwconfig ile de çalışıp çalışmadığını görebilirsiniz. Sürücü bilgileri görünmeli bu komut ile. Diyelim ki bu çıktıda wlan0 altında bilgiler görüyorsunuz. Bu durumda da, ifconfig wlan0 up dediğinizde wireless kartınızın artık çalışıyor olması gerek. 20-04-2011 18:40, Mehmet AK yazmış: Selam . lenny den Squeze upgrade yapmıştım ve Grub açılışına liste olarak en başta eski sürüm geliyormuş dikkat etmemiştim. Upgrade edilen çekirdek üzerinden açılınca virtualbox kullanmaya başladım. Yılın Acemi Debian cısı olarak ilan ediyorum kendimi bir arkadaşın lenova notebook üzerine debian kurdum. wireless ayarları için gerekli olan programları yükledim donanımsal olarak wireless ışığı açık olmasına rağmen yazılımda offline görünüyor. yardımlarınız için şimdiden teşekkür ederim Allah işlerinizde kolaylıklar versin İyi çalışmalar Date: Sat, 16 Apr 2011 15:30:19 +0300 From: goksin.akde...@gmail.com To: debian-user-turkish@lists.debian.org Subject: Re: virtualBox kurulum hakkında yardım isteği 16/04/2011 13:06, Mehmet AK yazmış: kernel headers paketini kurmak istediğimde şöyle bir hata mesajı alıyorum malesef :( mehmetak:/home/mehmet# apt-get install linux-headers-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-headers-2.6.32-bpo.5-amd64 E: Couldn't find any package by regex 'linux-headers-2.6.32-bpo.5-amd64' mehmetak:/home/mehmet# ; bpo gördüğümde aklıma backports.org geliyor. Aratınca Debian eski kararlı sürümü olan lenny için hazırlınamış olan backports paketleri geldi. Arkadaş Lenny ve resmi depolar yanında backports.org deposunu kullanıyor sanırım. Lenny kullanmak yerine Squeeze karalı sürümüne terfi edip depodan güncel bir Virtualbox sürümü kurabilirsiniz. işiniz daha kolay olur. -- Gökşin Akdeniz (Gökşin Akdeniz) goksin.akde...@gmail.com Anahtar parmakizi = FE10 8C14 A144 4FDE BE18 D5E3 E758 F49A 8A5D F8AE [Son kullanma tarihi: 2011-06-08] -- To UNSUBSCRIBE, email to debian-user-turkish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4daf3fb1.8060...@evdoxia.net -- To UNSUBSCRIBE, email to debian-user-turkish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db13494.6000...@evdoxia.net
Re: Backlight mystery - anyone shed light?
I'm taking a stab in the dark here (pun intended)... do you happen to have a /run directory? I had some issues with devices not being detected on boot recently which turned out to be related to udev attempting to read from /run. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=621036 In my case I removed /run and everything was back to normal. If you have no /run then sorry for the dull response :)
Re: uid gid problem restoring ubuntu made backup to new squeeze install
Dne, 21. 04. 2011 23:36:55 je Juan R. de Silva napisal(a): I'm in the process of moving from Ubuntu to Debian. I've installed squeeze and want to restore some of 2 users home files and directories from a backup made in Ubuntu. There are also some files from /etc needed to be restored. I preserved the user names for both of users in a new squeeze installation but UID and GID are different. How different? In Debian, the user numbers start at 1000 and go upwards. The user 1000 will be the first user you created (usually gets created during the installation of the OS). Then, once your OS is up and running, you can create new users with the GUI tool or with issuing the command 'adduser' (you must have root privileges to do that). The new users will start at 1001, then go to 1002, 1003 and so on. So just by creating them in a convenient order, you may get the UIDs you want (assuming that Ubuntu uses the same numbering schema, i.e. starting from 1000 up). If Ubuntu uses another schema (say, from down), the 'adduser --uid 100x' form should help. If you've just created your Debian users, then nothing will be lost by deleting them by issuing 'deluser --remove-all-files', and creating them from scratch with either of the methods above. Once you get your uids straight, you can start copying over the contents of the Ubuntu home dirs to Debian. Personally, I wouldn't copy them in bulk -- there's bound to be some useless cruft and old leftovers there. I'd copy them subdir by subdir, as needed. For example,after installing Wine, I'd copy over their respective .wine subdirs; and so on. So, by simply using 'cp - a' (or rsync) I would run into problem of their mismatch. Is there a simple and quick way to resolve it or I'll have to go trough this mess manually one step at a time? I know I could change UID and GID in Debian to Ubuntu values but I am quite reluctant to go this way. Thank you. HTH -- Cheerio, Klistvud http://bufferoverflow.tiddlyspot.com Certifiable Loonix User #481801 Please reply to the list, not to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303461655.12161.5@compax
Re: Backlight mystery - anyone shed light?
On Tue, Apr 19, 2011 at 12:14 PM, Anthony Campbell a...@acampbell.org.uk wrote: My HP laptop tends to boot with a dim screen. I can fix this with echo 10 /sys/devices/virtual/backlight/acpi_video0/brightness which I run from /etc/rc,local. the right way would be to use sysctl. that said, i always do things the way you've done it :) It works well with all kernels up to 2.6.37. With 2.6.38 there is usually no /sys/devices/virtual/backlight... so the above command can't work. i'd check the kernel changelog or maybe the debian kernel package changelog and see if something was changed for sysfs and see why. i'm not sure whether this line of question is appropriate for that forum, but if it is, someone on debian-dev should know. (reading through the archives, they seem to be hard asses on topicality, so i'd do my research first). also, you could try to ask on irc in #kernel What is really odd is that if I first boot with a 2.6.37 kernel and then reboot with a 2.6.38 version, everything works correctly. The file I need to modify is there and there is full brightness. iirc, this is stored in ram. i'll bet if you booted in the one kernel, and then did a shutdown -h and immediately powered up into the newer kernel, you'd notice a fail. that said, i think this is improper behavior. you didn't mention what version of debian you're running? ie, i don't think this happens onstable (than again, i'm only on .32, so...) Is this perhaps something to do with udev? I've found ubuntu bug reports describing somewhat similar problems but mostly with backlight being too bright rather than too dim. i would think it is more in the kernel than in udev. (i think udev gets its info from sysfs and proc - that's probably a bad way of stating this though. it's fron the kernel at any rate) I would make a bug report if I knew which package was at fault. Can anyone shed any light (literally)? It's an annoyance rather than a major problem but I've been trying to figure it out for at least two weeks wthout success, this does sound like a bug. it's at least an issue with some default config. if you can, swap out discs and do a fresh install and see what happens. i'm pretty sure you'll notice the same thing. however, that would be the right thing to do before putting in a bug report (and it would be great of you to follow up on this - helps the community and all) -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/BANLkTikSw=hysu2gaup0mqflbtsicf9...@mail.gmail.com
Re: pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff]
On Tue, 12 Apr 2011 11:06:14 +0700, Hoang Le wrote: (sorry for the delay, I've been a bit overflowed at work) How can I know what package the bug belongs to? For now, all I know is that that message can be found in kern.log file I'd say those messages come from kernel, so running the command I said before (dpkg -l | grep linux-image) should be enough to fill the bug report :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.12.15...@gmail.com
Re: Remove an Always Trust permission from OpenJDK/IcedTea Plugin
On Mon, Apr 18, 2011 at 10:57 PM, adris adr...@t-online.de wrote: Hi, thanks for the help. Am Montag, den 18.04.2011, 20:34 +0900 schrieb Joel Rees: On Mon, Apr 18, 2011 at 6:06 PM, adris adr...@t-online.de wrote: Hi, how can you undo the permission Always Trust this Publisher, once you checked that box for a signed applet in Iceweasel. (Shooting from the hip, here, but, ...) I think the quickest way is to remove the corresponding certificate. You go to the settings item in the edit menu, I don't remember the name of the group in English, but it should be something like miscellaneous or high-level or advanced or something. It's not in the security, contents, program, or privacy group, where you might expect it. I'm logged into an English session now and here's where it is: Edit menu - Preferences - Advanced - (button) View Certificates There also buttons there for revocation lists and validation, which you might be interested in, and security devices. I also first thought that this certificate got installed in Iceaweasel, but I did not find it listed among all the available options. You say options, does that mean you did or did not find the browser certificate store dialog? (I'm trying to remember the pseudo-url for getting at the browser's settings that it doesn't expose via GUI interfaces, and it's not coming t mind.) I just gave it a try and removed the whole ~/.mozilla folder. Nevertheless this certificated still seems to be trusted. Yeah, I'm pretty sure that would not work. Even though the dialog is the browser's, the certificate store is not. I'm trying to remember what is where, though and I'm drawing blanks. I hate getting old. Therefore I think that the certificate is marked trusted by OpenJDK. But I'm unable to find the default keystore. Have you tried installing the openJDK Policy Tool (GUI) and/or Monitoring and Management Console (JConsole)? It should be possible to add and remove trusted certificates with the keytool command, but I have to specify the keystore. Any idea where OpenJDK might have it's default keystore? Or am I looking the wrong way at that problem? I think the policy tool can tell you what it's using. Then again, I thnk the command line policy tool should use the default if it's going to use the default. Gnome has its own keystore, for what it's worth. Sorry I'm not much help today. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktimyd3oe72j67rpeplk7rtn3f98...@mail.gmail.com
Re: firefox gimp buttons missing - gtk issue?
On Wed, 13 Apr 2011 16:12:03 +, i'll teach you to turn away. wrote: Sven Joachim wrote: SJ On 2011-04-11 20:06 +0200, Camaleón wrote: On Sun, 10 Apr 2011 22:12:40 +, i'll teach you to turn away. wrote: hi guys. i'm having some trouble with what appears to be a gtk issue with firefox gimp. in short, buttons are missing. the firefox one is Missing icons https://bugzilla.gnome.org/show_bug.cgi?id=629878 Missing icons with gtk+-2.22 https://bugzilla.mozilla.org/show_bug.cgi?id=621962 SJ Almost surely yes. This has also been reported in the Debian BTS SJ already: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=597694. SJ SJ See the end of the bug log for a workaround that yours truly has SJ chosen. yes, i found those bug reports... but there's no mention of gimp being affected. i'm REALLY loathe to install more gnome stuff if it's not going to solve all of the issues. Installing the suggested package will not have any bad consequences (it will take about ~10 MiB of disk space but nothing more). Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.12.25...@gmail.com
Re: File a Bug Against GlobalMenu or Guayadeque?
On Wed, 13 Apr 2011 14:08:52 -0700, Freeman wrote: In Guayadeque 0.2.9, the file menu is not present when gnome globalmenu 0.7.9 packages are installed. How can I decide or diagnose which package has the bug? Don't bother about that, just report against the more natural one (Guayadeque) and let devels decide if it fits in another place. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.12.40...@gmail.com
BUG DOSEMU I can't understand this but still exist
Hello Sir I don't understand that Debian provides version of dosemu_1.4.0 +svn.1999-2_i386.deb in stable packages. So many people have found a bug with the programs written in PASCALPrograms developed for the real mode in turbo pascal work correctly. But programs developed in 16-bit protected (DPMI) don't work. I have tried this version on dosemu with different configarations of ubuntu and it never works in Turbo Pascal Can you tell me where does the bug come and in any case dosemu_1.4.0 +svn.1999-2_i386.deb is not stable dosemu Sincerely Patrice Lemonnier Programs developed for the real mode in turbo pascal work correctly. But programs developed in 16-bit protected (DPMI) don't work. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303475312.2631.8.camel@lemonnier-desktop
Re: file systems
Wonder if Reiser's FS inspired his decision where to stash his wife. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db17eb1.6030...@aya.yale.edu
Re: file systems
On Fri, 22 Apr 2011 00:34:24 +1000, Andrew wrote in message 4db04070.1030...@affinityvision.com.au: Hi, Heddle Weaver wrote: *http://tinyurl.com/3tu3ww9 That's a pretty old reference, but an interesting read. Important note: These tests were done with a 2.4 kernel. They should be repeated to see if they still apply with modern 2.6.18+ kernels in use today. *And this example is somewhat dated, but illustrates one such instance:* **http://tinyurl.com/3qjtj82 That's pretty old too but to me seems much less worthwhile reading. In any case, I would say that both of those references are too old to be of much real use to any argument today. ..I've had about half a dozen crashes on ext3 where the journal was written to disk but not the data, so the journal trashed my old data that were gone according to the journal, on the next fsck. -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110422151809.34bc5ddf@celsius.local
Re: file systems
On Thu, 21 Apr 2011 12:14:32 -0700, prad wrote in message 87bozzfmcn@towardsfreedom.com: Stan Hoeppner s...@hardwarefreak.com writes: prad put forth on 4/20/2011 11:43 PM: we want to run our servers through virtual box off usb drives which is a total departure from what we've done over the years. so might as well throw in a new fs too. :D Why USB? since our volume is pretty small we only require around 10G. ..hum, small enough for ramdisk. ;o) -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110422152320.537b442b@celsius.local
Re: BUG DOSEMU I can't understand this but still exist
On Apr 22, 2011 8:45 AM, lemonnier p.lemonni...@free.fr wrote: Programs developed for the real mode in turbo pascal work correctly. But programs developed in 16-bit protected (DPMI) don't work. I'm not sure what the difference between turbo pascal and any other version is. However, what its saying is that you can't write to OS memory within dosemu (with pascal?). So, if you try to access dma address space (or maybe even elevate to a higher ring of the processor) it will fail. Someone here might be able to give you better feedback. However I'd suggest you look for a dosemu mailing list or other forum for that discussion.
Re: X EDID reads fail after recent sid update
On Thu, 21 Apr 2011 07:21:17 +0200, Sven wrote in message 87ipu8ch82@turtle.gmx.de: On 2011-04-21 05:54 +0200, Joe Neal wrote: I recently upgraded my sid box with a Gforce 8600. Following a reboot the binary nvidia drivers would only give me a screen resolution so small it was unusable and nouveau failed to find any usable resolutions at all. Analysis of recent X logs indicated that in the case of both drivers, EDID reads were failing, providing X with no data. When testing with a GRML live CD, EDID data was returned using nouveau, so this isn't a hardware problem. Since the problem occurs with both nvidia drivers, it's not a driver problem. Since EDID reads work properly with the GRML live CD it's not a hardware problem. I don't think any X packages have been upgraded at all since the last boot that could have caused the problem. I'm at a loss as to where the problem is coming from. Any guesses? I don't really have an idea myself, but some people reported a problem with corrupted EDID on https://bugs.freedesktop.org/show_bug.cgi?id=34554. The information in that bug may be useful. Sven ..in WAG mode, I use radeon on all my graphics HW, and have these on my lab laptop (or labtop ;o)), you want ditto for nouveau, or use nvidea: arnt@celsius:~/Documents$ dpkg -l |grep radeon |fmt -tu ii libdrm-radeon1 2.4.25-1 Userspace interface to radeon-specific kernel DRM services -- runtime ii radeontool 1.6.1-1 utility to control ATI Radeon backlight functions on laptops ii xserver-xorg-video-radeon 1:6.14.1-1+exp1 X.Org X server -- AMD/ATI Radeon display driver arnt@celsius:~/Documents$ dpkg -l |grep drm |fmt -tu ii libdrm-intel1 2.4.25-1 Userspace interface to intel-specific kernel DRM services -- runtime rc libdrm-nouveau1 2.4.22-2 Userspace interface to nouveau-specific kernel DRM services -- runtime ii libdrm-nouveau1a 2.4.25-1 Userspace interface to nouveau-specific kernel DRM services -- runtime ii libdrm-radeon1 2.4.25-1 Userspace interface to radeon-specific kernel DRM services -- runtime ii libdrm2 2.4.25-1 Userspace interface to kernel DRM services -- runtime rc plymouth-drm 0.8.3-18 Graphical Boot Animation and Logger (DRM) arnt@celsius:~/Documents$ -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110422154438.4dfe7222@celsius.local
Re: uid gid problem restoring ubuntu made backup to new squeeze install
On Thu, 21 Apr 2011 21:36:55 + (UTC), Juan wrote in message ioq81m$v83$1...@dough.gmane.org: I'm in the process of moving from Ubuntu to Debian. I've installed squeeze and want to restore some of 2 users home files and directories from a backup made in Ubuntu. There are also some files from /etc needed to be restored. I preserved the user names for both of users in a new squeeze installation but UID and GID are different. So, by simply using 'cp - a' (or rsync) I would run into problem of their mismatch. Is there a simple and quick way to resolve it or I'll have to go trough this mess manually one step at a time? I know I could change UID and GID in Debian to Ubuntu values but I am quite reluctant to go this way. ..read output of 'chown --help '. ;o) -- ..med vennlig hilsen = with Kind Regards from Arnt Karlsen ...with a number of polar bear hunters in his ancestry... Scenarios always come in sets of three: best case, worst case, and just in case. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110422162439.0da9141b@celsius.local
Re: powerdown harddisk
On Wed, 20 Apr 2011 12:06:33 -0700, geertsky wrote: I want to powerdown my ide harddisk completly. I'm booting from a usb stick so the IDE disk is CONSUMING... I have an old laptop so I'd like to preserver as much as possible. I tried hdparm -Y /dev/sda but hdparm -C /dev/sda reports it's only in standby... And actually I can hear it spinning... It must be possible to power it down completly no? Any ideas? How about unmounting the device? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.14.25...@gmail.com
Re: powerdown harddisk
Hello List, On 22/04/11 16:25, Camaleón wrote: On Wed, 20 Apr 2011 12:06:33 -0700, geertsky wrote: I want to powerdown my ide harddisk completly. I'm booting from a usb stick so the IDE disk is CONSUMING... I have an old laptop so I'd like to preserver as much as possible. I tried hdparm -Y /dev/sda but hdparm -C /dev/sda reports it's only in standby... And actually I can hear it spinning... It must be possible to power it down completly no? Any ideas? How about unmounting the device? powertop may give some hints. hth Jerome Greetings, -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db19107.20...@rezozer.net
Re: Please recommend an external HDD enclosure
On Wed, 20 Apr 2011 22:12:50 +0300, Panayiotis Karabassis wrote: I made the mistake of purchasing an external HDD enclosure without researching first. The enclosure wouldn't be recognized in Debian Squeeze or Wheezy with errors that are not relevant since I've returned it to the shop. (...) I've had no problems with any of my hdd external cases so may I ask you about brand and model of yours? Anyway, you can get some useful feedback from New Egg's users comments: http://www.newegg.com/Store/SubCategory.aspx?SubCategory=92name=External-Enclosures Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.14.31...@gmail.com
Re: taskbar is missing
On Thu, 21 Apr 2011 11:33:46 +0200, Engi Zoltán wrote: I upgraded to Debian 6.0. After upgrading the taskbar is missing. I can get back it with killall gnome-panel command. What is wrong? Try by login with another user and check if the error persists. Sometimes GNOME settings are badly messed up after performing an upgrade (usually involving some core components) and a new and clean environment solves the problem. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.14.38...@gmail.com
Re: Backlight mystery - anyone shed light?
On 22 Apr 2011, James Robertson wrote: I'm taking a stab in the dark here (pun intended)... do you happen to have a /run directory? I had some issues with devices not being detected on boot recently which turned out to be related to udev attempting to read from /run. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=621036 In my case I removed /run and everything was back to normal. A If you have no /run then sorry for the dull response :) Thanks for the suggestion, but unfortunately I don't have /run so it isn't that in my case. -- Anthony Campbell - a...@acampbell.org.uk Microsoft-free zone - Using Debian GNU/Linux http://www.acampbell.org.uk - sample my ebooks at http://www.smashwords.com/profile/view/acampbell -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110422145213.gj9...@acampbell.org.uk
Re: Backlight mystery - anyone shed light?
On Tue, 19 Apr 2011 17:14:35 +0100, Anthony Campbell wrote: My HP laptop tends to boot with a dim screen. (...) Hum... some of the new HP notebooks have a sensor that automatically adjusts the brightness of the screen depending on the ambient light. This can be turned off in windows but I dunno if there is such utility for linux :-? What video driver are you loading? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.15.02...@gmail.com
Re: Backlight mystery - anyone shed light?
On 22 Apr 2011, shawn wilson wrote: On Tue, Apr 19, 2011 at 12:14 PM, Anthony Campbell a...@acampbell.org.uk wrote: My HP laptop tends to boot with a dim screen. I can fix this with echo 10 /sys/devices/virtual/backlight/acpi_video0/brightness which I run from /etc/rc,local. the right way would be to use sysctl. that said, i always do things the way you've done it :) It works well with all kernels up to 2.6.37. With 2.6.38 there is usually no /sys/devices/virtual/backlight... so the above command can't work. i'd check the kernel changelog or maybe the debian kernel package changelog and see if something was changed for sysfs and see why. i'm not sure whether this line of question is appropriate for that forum, but if it is, someone on debian-dev should know. (reading through the archives, they seem to be hard asses on topicality, so i'd do my research first). also, you could try to ask on irc in #kernel What is really odd is that if I first boot with a 2.6.37 kernel and then reboot with a 2.6.38 version, everything works correctly. The file I need to modify is there and there is full brightness. iirc, this is stored in ram. i'll bet if you booted in the one kernel, and then did a shutdown -h and immediately powered up into the newer kernel, you'd notice a fail. that said, i think this is improper behavior. you didn't mention what version of debian you're running? ie, i don't think this happens onstable (than again, i'm only on .32, so...) Is this perhaps something to do with udev? I've found ubuntu bug reports describing somewhat similar problems but mostly with backlight being too bright rather than too dim. i would think it is more in the kernel than in udev. (i think udev gets its info from sysfs and proc - that's probably a bad way of stating this though. it's fron the kernel at any rate) I would make a bug report if I knew which package was at fault. Can anyone shed any light (literally)? It's an annoyance rather than a major problem but I've been trying to figure it out for at least two weeks wthout success, this does sound like a bug. it's at least an issue with some default config. if you can, swap out discs and do a fresh install and see what happens. i'm pretty sure you'll notice the same thing. however, that would be the right thing to do before putting in a bug report (and it would be great of you to follow up on this - helps the community and all) Many thanks for these comments. I'll look into the kernel changelog files though I find them pretty intimidating these days. Time was when I used to compile my own kernels, but for a long time now I've settled for a quiet life and just install the standard Debian kernels. But you are probably right to say that it's a kernel problem. When it goes wrong, it starts up bright but then goes dim at a certain point in the boot process. I couldn't see anything in dmesg to explain this but I'll have another look. Anthony -- Anthony Campbell - a...@acampbell.org.uk Microsoft-free zone - Using Debian GNU/Linux http://www.acampbell.org.uk - sample my ebooks at http://www.smashwords.com/profile/view/acampbell -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110422150550.gk9...@acampbell.org.uk
Re: file systems
On 04/22/2011 08:12 AM, PMA wrote: Wonder if Reiser's FS inspired his decision where to stash his wife. In a tree? -- Neither the wisest constitution nor the wisest laws will secure the liberty and happiness of a people whose manners are universally corrupt. Samuel Adams, essay in The Public Advertiser, 1749 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db19d29.10...@cox.net
Re: Result of entering 'v' within mutt
On 20110421_173702, Alan McConnell wrote: On Thu, Apr 21, 2011 at 11:30:38AM -0500, green wrote: Alan McConnell wrote at 2011-04-21 09:34 -0500: I have looked at /etc/mailcap in my new squeeze, and also at the mailcap in my backup of my etc etc. They seem to be different files. I have greped new-tab in both and it isn't to be found No, you need to add it. And the file to edit is probably: ~/.mailcap Add a line like: text/html; iceweasel -new-tab '%s'; test=test -n $DISPLAY; nametemplate=%s.html If another text/html; entry exists, you may need to comment (#) it. Bingo! I didn't have a .mailcap in my home directory, I just created it populated with the line above. And now my mutt puts the stuff into a Tab just like I wanted. Mr Green is herewith added to my growing list of Geniuses! How did you ever know about this, Mr Green? is this documented anywhere, or did you intuit it? Maybe you are the mutt developer? You've FYI The developer of Mutt is, I believe, Michael Elkins. He is also a regular poster on the mutt-us...@mutt.org mailing list. My attitude towards Mutt and its setting up is conflicted. On the one hand, I have never made any serious progress on using any other MUA althougn I have had several bursts of serious effort. On the other hand, I find the documentation of Mutt difficult to follow. E.G. I find this little exchange of emails dificult to follow. Apparently you have gotten something working that previously you had been unable to configure. What exactly, I'm not sure, but I'm happy for you. For me, being puzzled by Mutt configuration is part of the human condition ;^) certainly added evidence to my claim, made in a different E-mail, that E-mail, the killer app, is by no means a piece of cake to set up correctly. Anyway, many thanks, and I'll pass this along to the mutt E-list. Greetings to all! Alan McConnell, in Silver Spring MD -- Alan McConnell : http://patriot.net/users/alan Know thyself. If you need help, call the C.I.A. Whenever anyone says, theoretically, they really mean, not really. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110421213702.GA5956@alanmcc.localdomain -- Paul E Condon pecon...@mesanetworks.net -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110422152426.ga18...@big.lan.gnu
Re: Problem with udev device identification
On Wed, 20 Apr 2011 17:21:41 -0400, Sebastian Lara wrote: I have three different serial devices connected to three usb-serial converters (FTDI USB-RS232). If I connect them, I get the generic device names /dev/ttyUSBx as expected. When I try to write some udev rules, udevadm shows me the same output for the three devices except in some device serial id attributes. Those serial id's will change on every device so if I use a different usb-serial converter, my rules won't work anymore. So, I need a way to communicate with the specific device connected to the serial converters and identify it by its response. (...) There must be a string that uniquely identifies the converters despite the device being attached on them... for instance, how about the serial number? This value shouldn't be shared between the tree devices at all :-? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.15.25...@gmail.com
BUG DOSEMU I can't understand this but still exist
Dosemu should work fine with DPMI memory handling - if configured properly. Have you checked your dosemu.conf for its cpu_emu setting? HTH-- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/alpine.lrh.2.01.1104220802190.5...@homer02.u.washington.edu
Re: Result of entering 'v' within mutt -- hopefully not too OT
On Thu, 21 Apr 2011 09:19:54 -0400, Alan McConnell wrote: On Tue, Apr 19, 2011 at 02:35:29PM -0400, Alan McConnell wrote: Assembled Wisdom! I have been running mutt for a good many years from with my Debian Linux distribution. A couple of days ago I upgraded from Debian etch to Debian squeeze and got mutt 1.5.20. It has one behavior that I don't like and I hope that it can be changed: when I type 'v' within mutt I am given a choice of viewing the message within a browser window. My Firefox is almost always open, and previously mutt would display the message within a new Tab. Now a new Firefox Window is opened. I don't like that! Can I change that behaviour e.g. with a command in my .muttrc? The above is what I posted to the mutt E-list. I got one person who wrote, yeah, I'd like to know that too; but otherwise nothing. Maybe someone here knows something about configuring mutt? Failing that, how easy is it to go back to an older version of mutt? My mutt on etch always opened a new Tab. sigh You mean you want to get rid of the view attachments window? Well, you can tweak the way Mutt handles attachments: http://www.mutt.org/doc/manual/manual-5.html Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.15.51...@gmail.com
gpg: copying secret key
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 I created a secret-public key pair for user A in computer P. It is one of two key pairs in file $HOME/.gnupg/secring.gpg. I would like to copy that key-pair for use by user A computer Q, but als for use of user B in computer Q. (I want to allow both user A and B to be able to decrypt files in computer Q which were encrypted by user A using this particular public key in computer P.) I looked on the gpg manual page, but I could not find a way to do so. Is it indeed possible to do what I want to do? If so I would be grateful to anyone who can tell me how. Regards, Ken Heard -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAk2xpXgACgkQlNlJzOkJmTfbZACeMF43DFrEzinyll4XY/eB2knZ rDoAnjJHiXAgl8OyCagZ+7Hy1KOVOYMS =SP/Q -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db1a579.8090...@heard.name
Re: Anyone using recoll in wheezy or sid?
On Thu, 21 Apr 2011 17:20:33 -0400, Wayne Topa wrote: I have recoll installed on stable, wheezy and sid. It is working fine on stable but on the other two it indexes fine but is not displaying the results. (...) Not using recoll here, but there are some bugs for it: http://bugs.debian.org/cgi-bin/pkgreport.cgi?pkg=recoll;dist=unstable OTOH, take a quick look into the upstream bugs (solved in 1.15.7): http://www.lesbonscomptes.com/recoll/BUGS.html#b_1_15_2 Also, try with a new user, just in case. I am looking for a replacement but have yet to find a worthy one. GNOME and KDE have both very good search desktop engines focused at them, Tracker for the former and Strigi/Nepomuk for the latter. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.16.19...@gmail.com
Re: file systems
hmm. nevermind. Ron Johnson wrote: On 04/22/2011 08:12 AM, PMA wrote: Wonder if Reiser's FS inspired his decision where to stash his wife. In a tree? -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db1adac.2000...@aya.yale.edu
Re: Backlight mystery - anyone shed light?
On Apr 22, 2011 11:06 AM, Anthony Campbell a...@acampbell.org.uk wrote: On 22 Apr 2011, shawn wilson wrote: On Tue, Apr 19, 2011 at 12:14 PM, Anthony Campbell a...@acampbell.org.uk wrote: My HP laptop tends to boot with a dim screen. I can fix this with echo 10 /sys/devices/virtual/backlight/acpi_video0/brightness which I run from /etc/rc,local. the right way would be to use sysctl. that said, i always do things the way you've done it :) It works well with all kernels up to 2.6.37. With 2.6.38 there is usually no /sys/devices/virtual/backlight... so the above command can't work. i'd check the kernel changelog or maybe the debian kernel package changelog and see if something was changed for sysfs and see why. i'm not sure whether this line of question is appropriate for that forum, but if it is, someone on debian-dev should know. (reading through the archives, they seem to be hard asses on topicality, so i'd do my research first). also, you could try to ask on irc in #kernel What is really odd is that if I first boot with a 2.6.37 kernel and then reboot with a 2.6.38 version, everything works correctly. The file I need to modify is there and there is full brightness. iirc, this is stored in ram. i'll bet if you booted in the one kernel, and then did a shutdown -h and immediately powered up into the newer kernel, you'd notice a fail. that said, i think this is improper behavior. you didn't mention what version of debian you're running? ie, i don't think this happens onstable (than again, i'm only on .32, so...) Is this perhaps something to do with udev? I've found ubuntu bug reports describing somewhat similar problems but mostly with backlight being too bright rather than too dim. i would think it is more in the kernel than in udev. (i think udev gets its info from sysfs and proc - that's probably a bad way of stating this though. it's fron the kernel at any rate) I would make a bug report if I knew which package was at fault. Can anyone shed any light (literally)? It's an annoyance rather than a major problem but I've been trying to figure it out for at least two weeks wthout success, this does sound like a bug. it's at least an issue with some default config. if you can, swap out discs and do a fresh install and see what happens. i'm pretty sure you'll notice the same thing. however, that would be the right thing to do before putting in a bug report (and it would be great of you to follow up on this - helps the community and all) Many thanks for these comments. I'll look into the kernel changelog files though I find them pretty intimidating these days. Time was when I used to compile my own kernels, but for a long time now I've settled for a quiet life and just install the standard Debian kernels. But you are probably right to say that it's a kernel problem. When it goes wrong, it starts up bright but then goes dim at a certain point in the boot process. I couldn't see anything in dmesg to explain this but I'll have another look. Might try turning on all kernel logging and look to see if there's any logging hook for proc, sysfs, and udev. If it is bright when you first turn the machine on and then dims, the goal would be to synchronize a clock with your computer (ntp?) and look at the time when it goes dim and see what happened at that point. It is completely possible that your backlight function got moved into a more appropriate place where other utilities know about it and some setting is too low for you by default.
Re: gpg: copying secret key
On Fri, 22 Apr 2011 11:57:45 -0400, Ken Heard wrote: I created a secret-public key pair for user A in computer P. It is one of two key pairs in file $HOME/.gnupg/secring.gpg. I would like to copy that key-pair for use by user A computer Q, but als for use of user B in computer Q. (I want to allow both user A and B to be able to decrypt files in computer Q which were encrypted by user A using this particular public key in computer P.) I'm not sure to have correctly understood your goal... basically you want to use one key (same passphrase) for two users? If yes, do you think doing that is a good idea? User A and B being different in real life will become the same to all effects at GPG level and they'll can impersonate each other. I looked on the gpg manual page, but I could not find a way to do so. Is it indeed possible to do what I want to do? If so I would be grateful to anyone who can tell me how. Just thinking loud... couldn't you just export/import the key on the desired computer? Most of the DE have utilities to manage that (Keoplatra in KDE and Seahorse in GNOME) :-? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.16.39...@gmail.com
Re: Anyone using recoll in wheezy or sid?
On 04/22/2011 12:19 PM, Camaleón wrote: On Thu, 21 Apr 2011 17:20:33 -0400, Wayne Topa wrote: I have recoll installed on stable, wheezy and sid. It is working fine on stable but on the other two it indexes fine but is not displaying the results. (...) Not using recoll here, but there are some bugs for it: http://bugs.debian.org/cgi-bin/pkgreport.cgi?pkg=recoll;dist=unstable OTOH, take a quick look into the upstream bugs (solved in 1.15.7): I had a typo in the sid version it IS 1.15.7-2 I relied on apt-list bugs to report any bugs. ;-( I guess that was a mistake!! Thanks for the link. I'll go back to using http://bugs.debian.org from now on. http://www.lesbonscomptes.com/recoll/BUGS.html#b_1_15_2 Also, try with a new user, just in case. I had tried that to no avail. I am looking for a replacement but have yet to find a worthy one. GNOME and KDE have both very good search desktop engines focused at them, Tracker for the former and Strigi/Nepomuk for the latter. Thanks, I will have a look at them but I don't use Gnome or KDE so if they don't bring in too much overhead they may fill my needs. Greetings, Thanks Camaleón. Have a nice day!! -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db1b1e1.6040...@gmail.com
Re: Mediawiki extensions for Debian
On Thu, 21 Apr 2011 11:54:11 -0700, Freeman wrote: On Wed, Apr 20, 2011 at 06:51:23PM -0500, John W Foster wrote: I'm looking for more Mediawiki extensions packaged for Debian..stable Mediawiki 1.1xxx Any suggestions? And of course I know I can install them myself, just lazy want to keep the system all Debian. TIA: John p mediawiki-extensions- Extensions for MediaWiki -- Meta package p mediawiki-extensions-base - Extensions for MediaWiki -- Base package p mediawiki-extensions-collection - Extensions for MediaWiki -- Collection ext p mediawiki-extensions-confirmedi - Extensions for MediaWiki -- ConfirmEdit ex p mediawiki-extensions-fckeditor - Extensions for MediaWiki -- FCKeditor exte p mediawiki-extensions-geshi - Extensions for MediaWiki -- SyntaxHighligh p mediawiki-extensions-graphviz - Extensions for MediaWiki -- GraphViz exten p mediawiki-extensions-ldapauth - Extensions for MediaWiki -- LdapAuthentica p mediawiki-extensions-openid - Extensions for MediaWiki -- OpenID extensi p mediawiki-math - math rendering plugin for MediaWiki p mediawiki-metavidwiki - A MediaWiki extension for associative temp p mediawiki-semediawiki - Semantic MediaWiki helps to organise and s Just to add that be above can be easily found using the package search engine: http://packages.debian.org/search?keywords=mediawikisearchon=namessuite=stablesection=all Or by typing apt-cache search mediawiki :-) Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.16.53...@gmail.com
Re: Anyone using recoll in wheezy or sid?
On Thu, 21 Apr 2011 17:20:33 -0400 Wayne Topa linux...@gmail.com wrote: I have recoll installed on stable, wheezy and sid. It is working fine on stable but on the other two it indexes fine but is not displaying the results. I installed the helper files but still no display other then --- Documents 1-8 of at least 230 (query) Next Next The recoll in wheezy is 1.15.2-1 and in sid 1.12.7-2 apt-listbugs does not return errors. If anyone has recoll working on the above I would appreciate it if you could let me know. Recoll working fine here on my uptodate Sid. Celejar -- foffl.sourceforge.net - Feeds OFFLine, an offline RSS/Atom aggregator mailmin.sourceforge.net - remote access via secure (OpenPGP) email ssuds.sourceforge.net - A Simple Sudoku Solver and Generator -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110422130111.3f2a0cf2.cele...@gmail.com
[Fwd: Re: gpg: copying secret key]
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Sorry, I sent this reply only to Camaleón instead of to the list. Pushed the Reply button instead of Reply to List. Apologies. Regards, Ken Heard -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAk2xuogACgkQlNlJzOkJmTfizgCeLYt8k0FZM3S+vQ0XoBrEh5dG kLYAn1LIWg0rBtCti4MhvgnkI0unExhc =UuJA -END PGP SIGNATURE- ---BeginMessage--- -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Camaleón wrote: I'm not sure to have correctly understood your goal... basically you want to use one key (same passphrase) for two users? If yes, do you think doing that is a good idea? User A and B being different in real life will become the same to all effects at GPG level and they'll can impersonate each other. Actually A and B are the same person, namely me. A has files which I don't care who sees; all files in B are in encrypted folders which anybody who cracks the A directories and files does not know the existence (I hope) of user B. Just thinking loud... couldn't you just export/import the key on the desired computer? Most of the DE have utilities to manage that (Keoplatra in KDE and Seahorse in GNOME) :-? In fact I was able to solve the problem myself. After I sent my original post, I googled further and found out how to save the secret key and then to import and add to the secret keyring of both users A and B. Then by assigning to the secret key in both users with the ultimate trust level -- after all I created them -- I was able to use them to decrypt files as user B in computer Q files encrypted by user A on computer P. After all the imports were finished I shredded the .asc file containing the private key. The URL returned by Google which pointed me in the right direction was http://fedoraproject.org/wiki/DocsProject/UsingGpg/CreatingKeys#Creating_GPG_Keys_Using_the_KDE_Desktop. Thanks anyway for your response. Regards, Ken Heard -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEUEARECAAYFAk2xt7EACgkQlNlJzOkJmTdaXgCVF5EdhZrl6CYJDYc/+b/SwuYm jQCcCXheRbJwlFxy5aVC8Orm3YvwO/w= =cbxZ -END PGP SIGNATURE- ---End Message---
Re: gpg: copying secret key
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Camaleón wrote: I'm not sure to have correctly understood your goal... basically you want to use one key (same passphrase) for two users? If yes, do you think doing that is a good idea? User A and B being different in real life will become the same to all effects at GPG level and they'll can impersonate each other. Actually A and B are the same person, namely me. A has files which I don't care who sees; all files in B are in encrypted folders which anybody who cracks the A directories and files does not know the existence (I hope) of user B. Just thinking loud... couldn't you just export/import the key on the desired computer? Most of the DE have utilities to manage that (Keoplatra in KDE and Seahorse in GNOME) :-? In fact I was able to solve the problem myself. After I sent my original post, I googled further and found out how to save the secret key and then to import and add to the secret keyring of both users A and B. Then by assigning to the secret key in both users with the ultimate trust level -- after all I created them -- I was able to use them to decrypt files as user B in computer Q files encrypted by user A on computer P. After all the imports were finished I shredded the .asc file containing the private key. The URL returned by Google which pointed me in the right direction was http://fedoraproject.org/wiki/DocsProject/UsingGpg/CreatingKeys#Creating_GPG_Keys_Using_the_KDE_Desktop. Thanks anyway for your response. Regards, Ken Heard -BEGIN PGP SIGNATURE- Version: GnuPG v2.0.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAk2xuyIACgkQlNlJzOkJmTcdbwCbBrd7wseoigFmGuqIcIEPyRSU WYsAnjGloev5WgygRT7kRKLDWW545m2W =Ggdq -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db1bb50.3050...@heard.name
Using Files Without Mounting A Share From Another System
I now know I can use smbclient to read files on an SMB share without having to mount it, but I need to do more than that. I want to be able to access either Java classes or an executable on a shared volume on a server without having to mount the volume on the local system. (There are a couple reasons for not wanting to mount.) I know on Windows I can list the files on an SMB share on another system and access them using SMB/CIFS by just specifying the volume properly on the command line. I want to do something like that on Linux, but do more than just listing the files or copying them to the local computer. I need a way, on Linux, to access files on a network share, which could be SMB or NFS (or something else) without mounting the volume. For example, if I'm on System A and I have an executable on System B, and it's on a network share on System B, is there any way to run that executable without mounting that share as a volume on System A? Hal -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/e3f940e5-5e7c-44a6-9dba-36bd272ca...@halblog.com
lenny to squeeze dbus-daemon
I did my first server upgrade from Lenny to Squeeze the other day and dbus-daemon was installed automatically. Dbus is strictly for desktops isn't it? Is this necessary on a headless server? Can I safely remove it? -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db1bc22.5010...@hardwarefreak.com
Re: lenny to squeeze dbus-daemon
On 22/04/11 19:34, Stan Hoeppner wrote: I did my first server upgrade from Lenny to Squeeze the other day and dbus-daemon was installed automatically. Dbus is strictly for desktops isn't it? Is this necessary on a headless server? Can I safely remove it? aptitude why dbus tells me avahi-daemon depends on dbus. And I use avahi to publish afp (netatalk) and ssh services... -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db1bd78.5040...@rail.eu.org
Re: file systems
Arnt Karlsen put forth on 4/22/2011 8:18 AM: ..I've had about half a dozen crashes on ext3 where the journal was written to disk but not the data, so the journal trashed my old data that were gone according to the journal, on the next fsck. This is a result of using data=writeback journal mode and has been well known for a long time. If you use data=ordered mode (the default on most distros) the journal isn't written until after the data, which eliminates the problem you've experienced. https://ext4.wiki.kernel.org/index.php/Ext3_Data%3DOrdered_vs_Data%3DWriteback_mode -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db1be3b.2030...@hardwarefreak.com
Re: Using Files Without Mounting A Share From Another System
Hal Vaughan put forth on 4/22/2011 12:03 PM: I now know I can use smbclient to read files on an SMB share without having to mount it, but I need to do more than that. I want to be able to access either Java classes or an executable on a shared volume on a server without having to mount the volume on the local system. (There are a couple reasons for not wanting to mount.) I know on Windows I can list the files on an SMB share on another system and access them using SMB/CIFS by just specifying the volume properly on the command line. I want to do something like that on Linux, but do more than just listing the files or copying them to the local computer. I need a way, on Linux, to access files on a network share, which could be SMB or NFS (or something else) without mounting the volume. For example, if I'm on System A and I have an executable on System B, and it's on a network share on System B, is there any way to run that executable without mounting that share as a volume on System A? If you know the exact path to the file you can use scp to copy it locally and then execute the local copy. If you don't need to keep the binary, simply delete the local copy after use. Why is this? The remote filesystem contains execute permission for each file. Mounting the filesystem requires authentication. That authentication is required to determine execute permission. -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db1c11d.6070...@hardwarefreak.com
Re: Using Files Without Mounting A Share From Another System
On Fri, 22 Apr 2011 13:03:00 -0400, Hal Vaughan wrote: (...) I need a way, on Linux, to access files on a network share, which could be SMB or NFS (or something else) without mounting the volume. For example, if I'm on System A and I have an executable on System B, and it's on a network share on System B, is there any way to run that executable without mounting that share as a volume on System A? Hum... I think it could be possible, just ensure that the file in the share has the proper rights (that is, it should be executable by the user). As for java files, you could create a launcher on the desktop pointing to the file: java -jar smb://path/to/jar/file.jar Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.17.56...@gmail.com
Re: lenny to squeeze dbus-daemon
Erwan David put forth on 4/22/2011 12:40 PM: On 22/04/11 19:34, Stan Hoeppner wrote: I did my first server upgrade from Lenny to Squeeze the other day and dbus-daemon was installed automatically. Dbus is strictly for desktops isn't it? Is this necessary on a headless server? Can I safely remove it? aptitude why dbus tells me avahi-daemon depends on dbus. And I use avahi to publish afp (netatalk) and ssh services... That doesn't really answer my question. ~$ aptitude why dbus i libdbus-1-3 Recommends dbus ~$ aptitude why libdbus-1-3 i dbus Depends libdbus-1-3 (= 1.0.2) It appears my only dependency is circular. Aptitude says both are optional and not installed automatically. But, considering dbus was not part of my Lenny system, nor Etch before it, it sure seems that it was automatically installed by the Squeeze upgrade. So, my question stands. Does (headless) Squeeze need the dbus-daemon for something that Lenny did not, or can I safely remove it? -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db1c4f5.6070...@hardwarefreak.com
Re: lenny to squeeze dbus-daemon
On Fri, 22 Apr 2011 12:34:26 -0500, Stan Hoeppner wrote: I did my first server upgrade from Lenny to Squeeze the other day and dbus-daemon was installed automatically. You should have instructed apt to do not install recommended packages by default. Dbus is strictly for desktops isn't it? Is this necessary on a headless server? Can I safely remove it? You can remove it whenever not required by any other package/application. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.18.28...@gmail.com
Openjdk vs. sun-java in Debian
Howdie, fellow Debianites! I need somebody to explain to me in lay terms what's wrong with Java in Debian. I'm running Squeeze and have recently bumped into two Java-related issues: 1. The site http://ndt.switch.ch/ warns me about a missing Java Runtime Environment and prompts me to install it. I checked with aptitude, and sure enough, openjdk-6-jre is installed. 2. The game http://sourceforge.net/projects/bp2k6/files/Bolzplatz%202006/Bolzplatz%202006%20v1.0.3/ won't work, and I'm far too ignorant of Java to find out what exactly I'm missing. Is it that I'm running 64-bit and the game is 32-bit? Or do I need a particular plugin? Or perhaps just a symlink to the right binary somewhere? Or the proprietary Java from Sun? Or something else? Also, in general, how can I know when something Java-related won't work, is it the fault of the open Java I'm using or some wrong configuration somewhere in my system? Is there any simple, yet good howto on this? -- Cheerio, Klistvud http://bufferoverflow.tiddlyspot.com Certifiable Loonix User #481801 Please reply to the list, not to me. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1303497459.12161.6@compax
Re: Anyone using recoll in wheezy or sid?
On 04/22/2011 01:01 PM, Celejar wrote: On Thu, 21 Apr 2011 17:20:33 -0400 Wayne Topalinux...@gmail.com wrote: I have recoll installed on stable, wheezy and sid. It is working fine on stable but on the other two it indexes fine but is not displaying the results. I installed the helper files but still no display other then --- Documents 1-8 of at least 230 (query) Next Next The recoll in wheezy is 1.15.2-1 and in sid 1.12.7-2 ^5 apt-listbugs does not return errors. If anyone has recoll working on the above I would appreciate it if you could let me know. Recoll working fine here on my uptodate Sid. Celejar Thanks. I have it working now on the 3rd new test user. Weird that only 1 out of 3 test users works. I am continuing my testing to see what the Heck is going on here. Wayne -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4db1ca4f.4050...@gmail.com
Re: Openjdk vs. sun-java in Debian
On Fri, 22 Apr 2011 20:37:39 +0200, Klistvud wrote: (...) Also, in general, how can I know when something Java-related won't work, is it the fault of the open Java I'm using or some wrong configuration somewhere in my system? Is there any simple, yet good howto on this? Hum... simple way I'd say not, because most of the web sites use a javascript routine to check the java version installed and they can search for any general string like jre or java or they can be more specific and look for Sun Java-whatever-version and act accordingly. To be an online citizen with full rights you need the Sun's java plugin most of the times so if you usually browse sites that requires java VM just install the Sun's JRE and you're done. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.18.42...@gmail.com
Re: network-manager and resolv.conf
On Thu, 21 Apr 2011 08:25:36 -0700, tony mollica wrote: Using deb6-amd64 and I've searched for an acceptable solution but I find none that I like. The problem is that I would like to have this 'option single-request' lline in /etc/resolv.conf but network-manager continuously removes the line (and anything else it doesn't care for). There must be a way to identify this line as a permanent line or add it to the network manager config somewhere so it is always added back in when resolv.conf is changed. Question is: Where is that setting located? If you can't beat them, join them :-) Look at man networkmanager, it seems that you can tell NM to pass some values by scripting the desired commands by means of /etc/NetworkManager/ dispatcher.d/ folder. Maybe you can create a simple script -carefully look for the script requirements- that adds the option single-request value to /etc/ resolv.conf every time NM is in use. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.04.22.18.58...@gmail.com
Re: Re: Why does Linux crash?
Thank you, Boyd, that was just the sort of answer I was looking for. I tried using Ctrl+Alt+F1 to drop into a terminal but, again, it wasn't responsive. I'll commit your suggestions to memory for the next time the system locks up. You touched on the crux of my complaint: sure, I expect the odd processes to get out of control but keyboard/mouse/touchpad/input should still take precedence and allow someone to recover a badly crippled system. I was frustrated that Linux doesn't enforce this by default - assuming that it can. However, although I summarised my story as 'wait or yank power,' I did try a few keyboard interrupts: Ctrl+Alt+Del (possibly disabled), Ctrl+Alt+Backspace (probably disabled), and the Ctrl+Alt+F# keys. Unless the keyboard interrupts take special precedence, it's safe to assume that my system, indeed, locked up. I fix computers part time and I've seen first-hand what yanking the power can do to file system integrity. The thing to remember is that I'm not as smart as most of the people on this list but I'm not completely stupid either. Computer competence falls on a spectrum and not simply Beginner, Intermediate and Advanced. However, it's feedback like this which helps me improve my skills. With thanks, -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201104221453.38558.j...@bordenrhodes.com
Re: Openjdk vs. sun-java in Debian
On Fri, Apr 22, 2011 at 08:37:39PM +0200, Klistvud wrote: 1. The site http://ndt.switch.ch/ warns me about a missing Java Runtime Environment and prompts me to install it. I checked with aptitude, and sure enough, openjdk-6-jre is installed. Works here with the openjdk from Squeeze. The browser plugin package is called icedtea6-plugin. In most browsers 'about:plugins' lists all installed plugins, might be worth to check if it's listed and thus properly installed aswell. If for any reason it's required to have the 'original' Sun JRE and plugins installed you've to add the non-free part of the archive to your sources list. The browser plugin package is called sun-java6-plugin. HTH Sven -- I don't know much, but I do know this: With a golden heart, comes a rebel fist [ Streetlight Manifesto - Here's To Life ] -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110422190601.GA1732@colin
Re: Using Files Without Mounting A Share From Another System
On Apr 22, 2011, at 1:56 PM, Camaleón wrote: On Fri, 22 Apr 2011 13:03:00 -0400, Hal Vaughan wrote: (...) I need a way, on Linux, to access files on a network share, which could be SMB or NFS (or something else) without mounting the volume. For example, if I'm on System A and I have an executable on System B, and it's on a network share on System B, is there any way to run that executable without mounting that share as a volume on System A? Hum... I think it could be possible, just ensure that the file in the share has the proper rights (that is, it should be executable by the user). As for java files, you could create a launcher on the desktop pointing to the file: java -jar smb://path/to/jar/file.jar Does Java handle the SMB protocol on its own? I know I can't list a directory that way with ls, even with the Samba client package installed. Hal -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/11735cf9-4a87-4a52-8d5a-6fd03eeca...@halblog.com
Subject=Re: Re: VirtualBox 4 fails building kernel module (the same with nvidia module)
I switched to custom kernel and came across this thread. I also use squeeze and this is what I have found. First of, Debian has the following versions of nvidia-kernel-dkms packages: squeeze: 195.36.31-6 sid/wheezy: 260.19.44-1 experimental: 270.30-1 The version in squeeze fail on anything above kernel 2.6.38 and none will compile on 2.6.39 because of BKL removal; nvidia-kernel-dkms depends on it; include/linux/smp_lock.h is missing and the driver will not compile without it. So I settled for kernel 2.6.38.4 and nvidia-kernel-dkms from experimental because it compiles without issue. The packages from sid/wheezy also work but why not use the latest and greatest. Here is what i did: cd /usr/src download the following packages from exerimental: libgl1-nvidia-glx_270.30-1_amd64.deb nvidia-glx_270.30-1_amd64.deb nvidia-kernel-dkms_270.30-1_amd64.deb nvidia-common_20110213+1_amd64.deb nvidia-kernel-common_20110213+1_amd64.deb download, untar and configure kernel 2.6.38.4. cd linux-2.6.38.4 fakeroot make-kpkg --initrd --revision=2.6.38.4+jj --append_to_version=+jj kernel_image; fakeroot make-kpkg --initrd --revision=2.6.38.4+jj --append_to_version=+jj kernel_headers dpkg -i linux-image-2.6.38.4+jj_2.6.38.4+jj_amd64.deb linux-headers-2.6.38.4+jj_2.6.38.4+jj_amd64.deb dpkg -i libgl1-nvidia-glx_270.30-1_amd64.deb nvidia-glx_270.30-1_amd64.deb nvidia-kernel-dkms_270.30-1_amd64.deb nvidia-common_20110213+1_amd64.deb nvidia-kernel-common_20110213+1_amd64.deb dpkg-reconfigure nvidia-kernel-dkms Best regards, Jonas Jensen -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/banlktinsnwkfw328pljnb7nycqs7n8x...@mail.gmail.com