HP zBook keyboard issue

[Tom Dial]

One more try:

I have a Hewlett Packard zBook G5 with two misbehaving keys: The
unshifted f3 and f4 keys are intended (marked) to decrease and increase
screen backlight brightness. However, both operate identically with the
unshifted f8 key that (correctly) toggles the built-in microphone on or off.

The error appears at the scancode level:
showkey -k reports keycode 190 press and release for all three keys; and
showkey -s reports scancode 0x5a 0xda for all three keys; and to
restate, all three keys do, in fact, toggle the internal microphone.

The installation is vanilla Debian Bullseye except that:

a. It is installed on ZFS (including /)
b. It uses the nVidia proprietary driver and xorg (Nouveau was very
sluggish)
c. It is dual boot, with Windows and Debian on separate NVMe device.
Grub is installed on the Debian device and boots either Linux
and Windows on request.
d. Several non-Debian programs (Eclipse, Foxit PDF reader, Ghidra,
Google Chrome, and Zoom) are installed on /opt and almost certainly
irrelevant to the issue.

An oddity is that after a Debian update a few weeks ago, the two keys at
issue worked as I would like for a few days, then reverted after I
booted Windows and applied the monthly patch set. I do not quite know
what to make of that.

Suggestions for fixing this defect or how to approach resolving it, will
be gratefully received. The zBook is a very nice machine and has only
this defect and the apparently insoluble lack of support for the
proprietary fingerprint reader remaining.

Regards,

Tom Dial

Don’t miss out

[Niranjan SR]

Hey,

Just following up as you didn't reply to my last message.You might want to
take a look again at what CORPHICS offer.

We are a group of freelancers who work closely with clients to create to
deliver the best quality service out there.
we serve you with services like video editing,digital marketing,logo
designing,business cards & more..

please make sure to check our website Corphics .


please reply me asap!!!  :-)


teamcorphics




Click here

if you don't want to hear from me again.

Re: cannot mount smartphone anymore

[Emanuel Berg]

l0f4r0 wrote:

>> He probably assumed you installed it intentionally, and so
>> for a reason, as it appears to be an optional package.
>>
> Exactly! You should have had a good reason Emanuel to
> install it at the first place, no?

I don't remember.

> This package can be useful to limit access to your computer
> usb ports (in case you leave the machine unattended).

That doesn't sound like me. I have autologin enabled and
I never lock the front door...

-- 
underground experts united
https://dataswamp.org/~incal

Re: cannot mount smartphone anymore

[Emanuel Berg]

Curt wrote:

>>> Removing usbguard is maybe a drastic decision, isn't?
>>> Or maybe you don't want this package anymore for
>>> other reasons?
>>
>> No, why do I need it for?
>
> He probably assumed you installed it intentionally, and so
> for a reason, as it appears to be an optional package.

If so I don't remember why :)

-- 
underground experts united
https://dataswamp.org/~incal

Re: Server setup

[deloptes]

Polyna-Maude Racicot-Summerside wrote:

> So if you read back my message.
> I boot using a rescue system over the network.
> I do my partition.
> I make the filesystem.
> I mount.
> I use debootstrap.
> And after I need to configure boot, this is where it blocks.
> 
> Got it now ?


At least now I understood the problem.

After dbootstrap you should chroot and execute grub-install and update-grub
or vice versa. Of course it could be necessary to update some
configurations.

I attach here my installation notes I applied to USB-Stick. It should apply
to your use case as well (I hope)

Ah and if you find some pieces to improve, let me know.

regards



This is a step by step how to to install debian on a USB stick and make this 
stick bootable.
The stick in the example is found under /dev/sdb. Change to fit your setup.

1. Partition the disk. If you want you can use also crypto_LUKS and LVM

# fdisk -l /dev/sdb

Disk /dev/sdb: 28.9 GiB, 31051513856 bytes, 60647488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x93e4092b

Device Boot   Start  End  Sectors  Size Id Type
/dev/sdb1  *   2048  1050623  1048576  512M 83 Linux
/dev/sdb2   1050624 46679687 45629064 21.8G 83 Linux


   The example here will use plain ext4 on two partitions
/dev/sdb1   /boot
/dev/sdb2   /

1.a. USB Formatting with GPT

Model: Kingston DataTraveler 2.0 (scsi)
Disk /dev/sdb: 60647488s
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number  Start  EndSize   File system Name  Flags
1  2048s  1001471s   999424sfat32   EFI   boot, esp
2  1001472s   2050047s   1048576s   ext4
3  2050048s   10438655s  8388608s   linux-swap(v1)
4  10438656s  60647454s  50208799s  ext4


Use following setup

/dev/sdb1 /mnt/target/boot/efi
/dev/sdb2 /mnt/target/boot/
/dev/sdb4 /mnt/target/

mount the partitions and chroot (see below)
then install grub (5.2) and do update-grub
this should be done from efi booted system


2. Format the partitions

# mkfs.ext4 /dev/sdb1
# mkfs.ext4 /dev/sdb2

3. mount the partitions

# mkdir /mnt/target
# mount /dev/sdb2 /mnt/target
# mkdir /mnt/target/boot
# mount /dev/sdb1 /mnt/target/boot
# mount
/dev/sdb2 on /mnt/target type ext4 (rw,relatime)
/dev/sdb1 on /mnt/target/boot type ext4 (rw,relatime)

4. Debootstrap Buster to /mnt/target
https://wiki.debian.org/Debootstrap

The log can be monitored after starting debootstrap
tail -1000f  /mnt/target/debootstrap/debootstrap.log

# debootstrap buster /mnt/target/ http://deb.debian.org/debian/
I: Retrieving InRelease
I: Checking Release signature
I: Valid Release signature (key id 
6D33866EDD8FFA41C0143AEDDCC9EFBF77E11517)
I: Retrieving Packages
I: Validating Packages
I: Resolving dependencies of required packages...
I: Resolving dependencies of base packages...
I: Found additional required dependencies: adduser 
debian-archive-keyring fdisk gcc-8-base gpgv libacl1 libapt-pkg5.0 libattr1 
libaudit-common libaudit1 libblkid1 libbz2-1.0 libc6 libcap-ng0 libcom-err2 
libdb5.3 libdebconfclient0 libext2fs2 libfdisk1 libffi6 libgcc1 libgcrypt20 
libgmp10 libgnutls30 libgpg-error0 libhogweed4 libidn2-0 liblz4-1 liblzma5 
libmount1 libncursesw6 libnettle6 libp11-kit0 libpam0g libpcre3 libseccomp2 
libselinux1 libsemanage-common libsemanage1 libsepol1 libsmartcols1 libss2 
libstdc++6 libsystemd0 libtasn1-6 libtinfo6 libudev1 libunistring2 libuuid1 
libzstd1 zlib1g
I: Found additional base dependencies: dmsetup libapparmor1 
libapt-inst2.0 libargon2-1 libbsd0 libcap2 libcap2-bin libcryptsetup12 
libdevmapper1.02.1 libdns-export1104 libelf1 libestr0 libfastjson4 libidn11 
libip4tc0 libip6tc0 libiptc0 libisc-export1100 libjson-c3 libkmod2 
liblocale-gettext-perl liblognorm5 libmnl0 libncurses6 libnetfilter-conntrack3 
libnewt0.52 libnfnetlink0 libnftnl11 libpopt0 libprocps7 libslang2 libssl1.1 
libtext-charwidth-perl libtext-iconv-perl libtext-wrapi18n-perl libxtables12 
lsb-base xxd
I: Checking component main on http://deb.debian.org/debian...
I: Retrieving libacl1 2.2.53-4
I: Validating libacl1 2.2.53-4
I: Retrieving adduser 3.118
I: Validating adduser 3.118
I: Retrieving libapparmor1 2.13.2-10
I: Validating libapparmor1 2.13.2-10
I: Retrieving apt 1.8.2
I: Validating apt 1.8.2
I: Retrieving apt-utils 1.8.2
I: Validating apt-utils 1.8.2
[...]
I: Configuring 

Re: Server setup

[deloptes]

john doe wrote:

> Apparently you are not here to get some help.

No she is, but she doesn't know how ... 

Re: Emphasis notation in plain-text mail (was Re: Server setup)

[The Wanderer]

On 2021-06-13 at 17:30, Polyna-Maude Racicot-Summerside wrote:

> Hi,
> 
> On 2021-06-13 4:50 p.m., The Wanderer wrote:
> 
>> On 2021-06-13 at 16:42, Polyna-Maude Racicot-Summerside wrote:
>> 
>>> How do you make the text bold ? The * is enough ?
>> 
>> You don't. How the text is rendered depends entirely on the mail
>> client the person is using, and potentially on the configuration of
>> that client.
> 
> I didn't have in mind that message client could render some
> derivative of Markdown.

If I'm not mistaken, if anything it's actually more of an ancestor; I
first heard of Markdown well after this was already long-established.

> But, now I know ;-)
> 
> Regarding the asterisks, I used them in many text to make emphasis,
> including in some text that go out in printed form. Started doing so
> when I was still in university and transcribing my notes after the
> day.

Certainly better than the current apparent trend of using quotation
marks to do so...

-- 
   The Wanderer

The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore all
progress depends on the unreasonable man. -- George Bernard Shaw



signature.asc
Description: OpenPGP digital signature

Re: Emphasis notation in plain-text mail (was Re: Server setup)

[Polyna-Maude Racicot-Summerside]

Hi,

On 2021-06-13 4:50 p.m., The Wanderer wrote:
> On 2021-06-13 at 16:42, Polyna-Maude Racicot-Summerside wrote:
> 
>> How do you make the text bold ? The * is enough ?
> 
> You don't. How the text is rendered depends entirely on the mail client
> the person is using, and potentially on the configuration of that client.
> 
I didn't have in mind that message client could render some derivative
of Markdown.

But, now I know ;-)

Regarding the asterisks, I used them in many text to make emphasis,
including in some text that go out in printed form. Started doing so
when I was still in university and transcribing my notes after the day.

-- 
Polyna-Maude R.-Summerside
-Be smart, Be wise, Support opensource development



OpenPGP_signature
Description: OpenPGP digital signature

Emphasis notation in plain-text mail (was Re: Server setup)

[The Wanderer]

On 2021-06-13 at 16:42, Polyna-Maude Racicot-Summerside wrote:

> How do you make the text bold ? The * is enough ?

You don't. How the text is rendered depends entirely on the mail client
the person is using, and potentially on the configuration of that client.

Some clients - including the one I'm using, and apparently also the one
you're using - will interpret *asterisks* as meaning that the enclosed
text should be rendered as boldface; mine also interprets /slashes/ as
indicating that the enclosed text should be rendered in italics, and may
also interpret _underscores_ as meaning that the enclosed text should be
rendered with an underline.

(In principle the same thing could also be extended to -hyphens- meaning
the enclosed text should be rendered as strikethrough, but I don't think
I've seen that in practice.)

Other clients will interpret the asterisks, etc., literally, and will
not apply any special formatting because of them. You can't affect that.


So, in brief: if you want to convey emphasis, feel free to use
*asterisks* or /slashes/ or _underscores_. Some clients will apply
formatting as a result of seeing that; others won't, but the people
reading the text may still interpret the annotations as indicating
emphasis anyway.

I got started using *asterisks* well before I was using a client that
would apply special formatting for them, so I naturally interpret them
as indicating emphasis, even with no special formatting in place; I
expect there are probably many other people out there with the same
conditioning.

-- 
   The Wanderer

The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore all
progress depends on the unreasonable man. -- George Bernard Shaw



signature.asc
Description: OpenPGP digital signature

Re: Server setup

[Polyna-Maude Racicot-Summerside]

Hi,

On 2021-06-13 3:51 p.m., Greg Wooledge wrote:
> On Sun, Jun 13, 2021 at 03:44:26PM -0400, Polyna-Maude Racicot-Summerside 
> wrote:
>> It's not a thing of being rude or not.
>> But please, take time to read what the person ask before writing a answer.
> 
> But you never actually *asked* anything in your original message.
> 
> You *implied* that you wanted to change the way your disk was partitioned,
> but you never actually *said* it.  Nor did you say *why* you wanted to
> change it.  Nor did you tell us what you had already tried, or how it
> failed.
> 

How do you make the text bold ?
The * is enough ?
-- 
Polyna-Maude R.-Summerside
-Be smart, Be wise, Support opensource development



OpenPGP_signature
Description: OpenPGP digital signature

Re: Server setup

[Polyna-Maude Racicot-Summerside]

Hi,

On 2021-06-13 3:51 p.m., Greg Wooledge wrote:
> On Sun, Jun 13, 2021 at 03:44:26PM -0400, Polyna-Maude Racicot-Summerside 
> wrote:
>> It's not a thing of being rude or not.
>> But please, take time to read what the person ask before writing a answer.
> 
> But you never actually *asked* anything in your original message.
> 
> You *implied* that you wanted to change the way your disk was partitioned,
> but you never actually *said* it.  Nor did you say *why* you wanted to
> change it.  Nor did you tell us what you had already tried, or how it
> failed.
> 


I'll write back another message then.

And add that :
I don't need help to get my disk partitioned.

That I need help with the configuration of my boot disk.

After doing my chroot post debootstrap, I run grub-install.
How do I make the setup properly.

So I'll add all those information and do it again.

On this point, maybe I wasn't enough specific on what I asked.
-- 
Polyna-Maude R.-Summerside
-Be smart, Be wise, Support opensource development



OpenPGP_signature
Description: OpenPGP digital signature

Re: Server setup

[Greg Wooledge]

On Sun, Jun 13, 2021 at 03:44:26PM -0400, Polyna-Maude Racicot-Summerside wrote:
> It's not a thing of being rude or not.
> But please, take time to read what the person ask before writing a answer.

But you never actually *asked* anything in your original message.

You *implied* that you wanted to change the way your disk was partitioned,
but you never actually *said* it.  Nor did you say *why* you wanted to
change it.  Nor did you tell us what you had already tried, or how it
failed.

Re: Server setup

[Polyna-Maude Racicot-Summerside]

It's not a thing of being rude or not.
But please, take time to read what the person ask before writing a answer.

If you ask "Is there a good software for bitmap imaging" and I answer
"You shall try Inkscape". What will you think ? That you are looking for
a bitmap editor not a vector based...

And you'll consider my answer quite useless.

>>>
>>> The same as yours spitting out the same thing for the third time.
>>>
>>
>> To 'Georgi Naplatanov', my inttention was not to imply that your answer
>> was bad/incorrect.
>>
>> My apologies if this was the case.
>>
>> -- 
>> John Doe
>>
> 
> 
> No problem John.
> 
> Have a nice day/night.
> 
> Kind regards
> Georgi
> 

-- 
Polyna-Maude R.-Summerside
-Be smart, Be wise, Support opensource development



OpenPGP_signature
Description: OpenPGP digital signature

Re: Archiver mails

[steve]

Le 13-06-2021, à 12:59:29 +0200, Marc Chantreux a écrit :


salut,


J'ai longtemps utilisé archivemail pour cette tâche, mais le paquet a
été retiré de Debian. Je ne trouve pas d'alternative pour mon use case.


pour ceux qui ne connaissent pas archivemail: c'est quoi ton cas
d'usage?


Bah, rien de particulier. Il scanne ton maildir et selon certaines
conditions (ancienneté, etc…) crée un .gz et le déplace ailleurs. Tout
ça piloté par une tâche cron.

J'utilise mutt et ne peut dont pas me reposer sur une solution basée sur
Thunderbird ou autres clients graphiques.

Re: Server setup

[Georgi Naplatanov]

On 6/13/21 9:50 PM, john doe wrote:
> On 6/13/2021 8:12 PM, john doe wrote:
>> On 6/13/2021 7:57 PM, Polyna-Maude Racicot-Summerside wrote:
>>> Hi,
>>>
>>> On 2021-06-13 1:52 p.m., Georgi Naplatanov wrote:
 On 6/13/21 7:53 PM, Polyna-Maude Racicot-Summerside wrote:
> Hi,
>
>
> If you read the part of my message I've left you'll see that :
>
> 1st, I'm using a OVH server but it's provided by one-provider, so the
> interface (aka Wizard) ain't the same.
>
> 2nd, I am asking how to do something using command line interface. So
> don,t tell me "Hey dude, use a wizard".
>
> 3rd, regarding contacting tech support. You really think it's OVH's
> job
> to explain to me how to install OS using network boot and a shell
> interface ? I doubt
>
> Just a little hint for life... If someone is telling you, I'm fucked
> using a CLI and they seem to have a basic knowledge of what they are
> doing. Then think twice and you'll get in your mind that they've
> already
> exhausted the easy one of using a click and poop solution like a
> wizard.
>

 Dear Polyna-Maude,

 I'm very sorry if I have made you feel bad.

 I have not used dedicated servers for years so excuse me for not being
 familiar with OVH or whatever company you use for VPS or dedicated
 servers. My point is that there should be something like configurator
 (wizard, template or whatever) what has to help you to do initial
 configuration of OS - partitions, RAID level, network configuration and
 minimal OS installation, and - yes - if that is not Debian installer
 then yes - you can ask technical support to provide information for the
 tool they use.

 Kind regards
 Georgi

>>>
>>> You must also have a huge need to answer question without reading what
>>> they are.
>>>
>>
>> The same as yours spitting out the same thing for the third time.
>>
> 
> To 'Georgi Naplatanov', my inttention was not to imply that your answer
> was bad/incorrect.
> 
> My apologies if this was the case.
> 
> -- 
> John Doe
> 


No problem John.

Have a nice day/night.

Kind regards
Georgi

Re: Archiver mails

[Jean Bernon]

Il y a une fonction d'archivage dans Thunderbird 

https://support.mozilla.org/fr/kb/archivage-des-messages 
C'est manuel et non automatique, mais avec des filtres on peut faire des 
opérations de masse très précises. 
- Mail original -

> De: "steve" 
> À: "duf" 
> Envoyé: Dimanche 13 Juin 2021 11:08:03
> Objet: Archiver mails

> Salut,

> J'ai longtemps utilisé archivemail pour cette tâche, mais le paquet a
> été retiré de Debian. Je ne trouve pas d'alternative pour mon use
> case.

> Mes mails sont au format maildir et je souhaite pouvoir créer une
> tâche
> cron qui s'occupe de ça automatiquement.

> Qu'utilisez-vous ?

> Merci et bon dimanche !

> Steve

Re: cannot mount smartphone anymore

[Emanuel Berg]

l0f4r0 wrote:

> Removing usbguard is maybe a drastic decision, isn't?
> Or maybe you don't want this package anymore for
> other reasons?

No, why do I need it for?

Anyway it is removed now...

-- 
underground experts united
https://dataswamp.org/~incal

Re: cannot mount smartphone anymore

[l0f4r0]

Hi,

13 juin 2021, 17:51 de cu...@free.fr:

> On 2021-06-13, Emanuel Berg  wrote:
>
>> l0f4r0 wrote:
>>
>>> Removing usbguard is maybe a drastic decision, isn't?
>>> Or maybe you don't want this package anymore for
>>> other reasons?
>>>
>> No, why do I need it for?
>>
> He probably assumed you installed it intentionally, and so for a reason,
> as it appears to be an optional package.
>
Exactly! You should have had a good reason Emanuel to install it at the first 
place, no?

This package can be useful to limit access to your computer usb ports (in case 
you leave the machine unattended).

Best regards,
l0f4r0

Re: Server setup

[john doe]

On 6/13/2021 8:12 PM, john doe wrote:

On 6/13/2021 7:57 PM, Polyna-Maude Racicot-Summerside wrote:

Hi,

On 2021-06-13 1:52 p.m., Georgi Naplatanov wrote:

On 6/13/21 7:53 PM, Polyna-Maude Racicot-Summerside wrote:

Hi,


If you read the part of my message I've left you'll see that :

1st, I'm using a OVH server but it's provided by one-provider, so the
interface (aka Wizard) ain't the same.

2nd, I am asking how to do something using command line interface. So
don,t tell me "Hey dude, use a wizard".

3rd, regarding contacting tech support. You really think it's OVH's job
to explain to me how to install OS using network boot and a shell
interface ? I doubt

Just a little hint for life... If someone is telling you, I'm fucked
using a CLI and they seem to have a basic knowledge of what they are
doing. Then think twice and you'll get in your mind that they've
already
exhausted the easy one of using a click and poop solution like a
wizard.



Dear Polyna-Maude,

I'm very sorry if I have made you feel bad.

I have not used dedicated servers for years so excuse me for not being
familiar with OVH or whatever company you use for VPS or dedicated
servers. My point is that there should be something like configurator
(wizard, template or whatever) what has to help you to do initial
configuration of OS - partitions, RAID level, network configuration and
minimal OS installation, and - yes - if that is not Debian installer
then yes - you can ask technical support to provide information for the
tool they use.

Kind regards
Georgi



You must also have a huge need to answer question without reading what
they are.



The same as yours spitting out the same thing for the third time.



To 'Georgi Naplatanov', my inttention was not to imply that your answer
was bad/incorrect.

My apologies if this was the case.

--
John Doe

Re: Server setup

[Polyna-Maude Racicot-Summerside]

Hi !
Tell me where it's not clear :

--- Start of original message ---
Hi !
I'm renting a server with one-provider (OVH).

I have a choice of OS and it does a great job running Debian Buster.
But...

The "standard" installation give me one partition in RAID mirror ( 3 x 2
To). So I get only a big root partition and nothing else

I don't have access to my server with a KVM, so all has to be done thru
the network using a recovery (rescue) option. That is, I was able to
reboot in rescue mode, use debootstrap to populate a new system.

Where it did fail was for the reboot.

The machine doesn't seem to use EFI (like most server) and I only see
the following partition using the automatic installer.

root@polynamaude:~# fdisk -l /dev/sda
Disk /dev/sda: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
Disk model: HGST HUS724020AL
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: CCB4C5CB-BB03-4D36-B307-AF5B5BF830A1

Device  StartEndSectors   Size Type
/dev/sda1  34   2008   1975 987.5K BIOS boot
/dev/sda22009 3905976495 3905974487   1.8T Linux RAID
/dev/sda3  3905976496 39070250711048576   512M Linux filesystem
/dev/sda4  3907025072 3907029134   4063 2M Linux filesystem

So I can see it's a gpt table
But I get a bit lost when it's time to use grub to setup my machine by
remote.

Someone has a clue ?

Yes it's not a huge power horse but I plan to make it usable as a mirror
for the community (Debian) so help will be greatly appreciated.

Thanks

---

On 2021-06-13 2:12 p.m., john doe wrote:
> On 6/13/2021 7:57 PM, Polyna-Maude Racicot-Summerside wrote:
>> Hi,
>>
>> On 2021-06-13 1:52 p.m., Georgi Naplatanov wrote:
>>> On 6/13/21 7:53 PM, Polyna-Maude Racicot-Summerside wrote:
 Hi,


 If you read the part of my message I've left you'll see that :

 1st, I'm using a OVH server but it's provided by one-provider, so the
 interface (aka Wizard) ain't the same.

 2nd, I am asking how to do something using command line interface. So
 don,t tell me "Hey dude, use a wizard".

 3rd, regarding contacting tech support. You really think it's OVH's job
 to explain to me how to install OS using network boot and a shell
 interface ? I doubt

 Just a little hint for life... If someone is telling you, I'm fucked
 using a CLI and they seem to have a basic knowledge of what they are
 doing. Then think twice and you'll get in your mind that they've
 already
 exhausted the easy one of using a click and poop solution like a
 wizard.

>>>
>>> Dear Polyna-Maude,
>>>
>>> I'm very sorry if I have made you feel bad.
>>>
>>> I have not used dedicated servers for years so excuse me for not being
>>> familiar with OVH or whatever company you use for VPS or dedicated
>>> servers. My point is that there should be something like configurator
>>> (wizard, template or whatever) what has to help you to do initial
>>> configuration of OS - partitions, RAID level, network configuration and
>>> minimal OS installation, and - yes - if that is not Debian installer
>>> then yes - you can ask technical support to provide information for the
>>> tool they use.
>>>
>>> Kind regards
>>> Georgi
>>>
>>
>> You must also have a huge need to answer question without reading what
>> they are.
>>
> 
> The same as yours spitting out the same thing for the third time.
> 
>> I ain't using the Debian installer because I don't have access to the
>> KVM (Keyboard, Mouse, etc).
>>
>> So if you read back my message.
>> I boot using a rescue system over the network.
>> I do my partition.
>> I make the filesystem.
>> I mount.
>> I use debootstrap.
>> And after I need to configure boot, this is where it blocks.
>> So how useful is your answer to use "the wizard in the installer ?".
>> And no there's no configuration helper (said it for the 3rd time now).
>>
> 
> Apparently you are not here to get some help.
> 
>> If you can't help... Just a hint, do same as I do, you let other people
>> answer.
>>
> 
> If you can't express yourself clearly enough, that is where the issue
> lies not on the person trying to help you.
> 
> Assuming that you are hoping for an answer, please be mindful of the
> tone you use.
> 
> -- 
> John Doe
> 

-- 
Polyna-Maude R.-Summerside
-Be smart, Be wise, Support opensource development



OpenPGP_signature
Description: OpenPGP digital signature

Re: firefox scrollbar slider

[Richmond]

Solved: https://bugzilla.mozilla.org/show_bug.cgi?id=1707470#c3

Re: Server setup

[john doe]

On 6/13/2021 7:57 PM, Polyna-Maude Racicot-Summerside wrote:

Hi,

On 2021-06-13 1:52 p.m., Georgi Naplatanov wrote:

On 6/13/21 7:53 PM, Polyna-Maude Racicot-Summerside wrote:

Hi,


If you read the part of my message I've left you'll see that :

1st, I'm using a OVH server but it's provided by one-provider, so the
interface (aka Wizard) ain't the same.

2nd, I am asking how to do something using command line interface. So
don,t tell me "Hey dude, use a wizard".

3rd, regarding contacting tech support. You really think it's OVH's job
to explain to me how to install OS using network boot and a shell
interface ? I doubt

Just a little hint for life... If someone is telling you, I'm fucked
using a CLI and they seem to have a basic knowledge of what they are
doing. Then think twice and you'll get in your mind that they've already
exhausted the easy one of using a click and poop solution like a wizard.



Dear Polyna-Maude,

I'm very sorry if I have made you feel bad.

I have not used dedicated servers for years so excuse me for not being
familiar with OVH or whatever company you use for VPS or dedicated
servers. My point is that there should be something like configurator
(wizard, template or whatever) what has to help you to do initial
configuration of OS - partitions, RAID level, network configuration and
minimal OS installation, and - yes - if that is not Debian installer
then yes - you can ask technical support to provide information for the
tool they use.

Kind regards
Georgi



You must also have a huge need to answer question without reading what
they are.



The same as yours spitting out the same thing for the third time.


I ain't using the Debian installer because I don't have access to the
KVM (Keyboard, Mouse, etc).

So if you read back my message.
I boot using a rescue system over the network.
I do my partition.
I make the filesystem.
I mount.
I use debootstrap.
And after I need to configure boot, this is where it blocks.
So how useful is your answer to use "the wizard in the installer ?".
And no there's no configuration helper (said it for the 3rd time now).



Apparently you are not here to get some help.


If you can't help... Just a hint, do same as I do, you let other people
answer.



If you can't express yourself clearly enough, that is where the issue
lies not on the person trying to help you.

Assuming that you are hoping for an answer, please be mindful of the
tone you use.

--
John Doe

Re: Server setup

[Polyna-Maude Racicot-Summerside]

Hi,

On 2021-06-13 1:52 p.m., Georgi Naplatanov wrote:
> On 6/13/21 7:53 PM, Polyna-Maude Racicot-Summerside wrote:
>> Hi,
>>
 I have a choice of OS and it does a great job running Debian Buster.
 But...

 The "standard" installation give me one partition in RAID mirror ( 3 x 2
 To). So I get only a big root partition and nothing else

 I don't have access to my server with a KVM, so all has to be done thru
 the network using a recovery (rescue) option. That is, I was able to
 reboot in rescue mode, use debootstrap to populate a new system.

 Where it did fail was for the reboot.
>>>
>>> Hi Polyna-Maude,
>>>
>>> I didn't understand what you problems were. Using GPT partition table
>>> with BIOS (not UEFI) is just fine therefore you have "BIOS boot"
>>> partition for the second stage of Grub. If you have problems with
>>> partitioning or other part of initial Debian installation I recommend to
>>> ask OVH's support. In the past they had wizard where you can configure
>>> partitions. ... and don't forget to configure IPv6, according to
>>> statistics provided by Google, 1/3 of their users use IPv6.
>>>
>>> Kind regards
>>> Georgi
>>>
>>
>> If you read the part of my message I've left you'll see that :
>>
>> 1st, I'm using a OVH server but it's provided by one-provider, so the
>> interface (aka Wizard) ain't the same.
>>
>> 2nd, I am asking how to do something using command line interface. So
>> don,t tell me "Hey dude, use a wizard".
>>
>> 3rd, regarding contacting tech support. You really think it's OVH's job
>> to explain to me how to install OS using network boot and a shell
>> interface ? I doubt
>>
>> Just a little hint for life... If someone is telling you, I'm fucked
>> using a CLI and they seem to have a basic knowledge of what they are
>> doing. Then think twice and you'll get in your mind that they've already
>> exhausted the easy one of using a click and poop solution like a wizard.
>>
> 
> Dear Polyna-Maude,
> 
> I'm very sorry if I have made you feel bad.
> 
> I have not used dedicated servers for years so excuse me for not being
> familiar with OVH or whatever company you use for VPS or dedicated
> servers. My point is that there should be something like configurator
> (wizard, template or whatever) what has to help you to do initial
> configuration of OS - partitions, RAID level, network configuration and
> minimal OS installation, and - yes - if that is not Debian installer
> then yes - you can ask technical support to provide information for the
> tool they use.
> 
> Kind regards
> Georgi
> 

You must also have a huge need to answer question without reading what
they are.

I ain't using the Debian installer because I don't have access to the
KVM (Keyboard, Mouse, etc).

So if you read back my message.
I boot using a rescue system over the network.
I do my partition.
I make the filesystem.
I mount.
I use debootstrap.
And after I need to configure boot, this is where it blocks.

Got it now ?

So how useful is your answer to use "the wizard in the installer ?".
And no there's no configuration helper (said it for the 3rd time now).

If you can't help... Just a hint, do same as I do, you let other people
answer.
-- 
Polyna-Maude R.-Summerside
-Be smart, Be wise, Support opensource development



OpenPGP_signature
Description: OpenPGP digital signature

Re: Server setup

[Georgi Naplatanov]

On 6/13/21 7:53 PM, Polyna-Maude Racicot-Summerside wrote:
> Hi,
> 
>>> I have a choice of OS and it does a great job running Debian Buster.
>>> But...
>>>
>>> The "standard" installation give me one partition in RAID mirror ( 3 x 2
>>> To). So I get only a big root partition and nothing else
>>>
>>> I don't have access to my server with a KVM, so all has to be done thru
>>> the network using a recovery (rescue) option. That is, I was able to
>>> reboot in rescue mode, use debootstrap to populate a new system.
>>>
>>> Where it did fail was for the reboot.
>>
>> Hi Polyna-Maude,
>>
>> I didn't understand what you problems were. Using GPT partition table
>> with BIOS (not UEFI) is just fine therefore you have "BIOS boot"
>> partition for the second stage of Grub. If you have problems with
>> partitioning or other part of initial Debian installation I recommend to
>> ask OVH's support. In the past they had wizard where you can configure
>> partitions. ... and don't forget to configure IPv6, according to
>> statistics provided by Google, 1/3 of their users use IPv6.
>>
>> Kind regards
>> Georgi
>>
> 
> If you read the part of my message I've left you'll see that :
> 
> 1st, I'm using a OVH server but it's provided by one-provider, so the
> interface (aka Wizard) ain't the same.
> 
> 2nd, I am asking how to do something using command line interface. So
> don,t tell me "Hey dude, use a wizard".
> 
> 3rd, regarding contacting tech support. You really think it's OVH's job
> to explain to me how to install OS using network boot and a shell
> interface ? I doubt
> 
> Just a little hint for life... If someone is telling you, I'm fucked
> using a CLI and they seem to have a basic knowledge of what they are
> doing. Then think twice and you'll get in your mind that they've already
> exhausted the easy one of using a click and poop solution like a wizard.
> 

Dear Polyna-Maude,

I'm very sorry if I have made you feel bad.

I have not used dedicated servers for years so excuse me for not being
familiar with OVH or whatever company you use for VPS or dedicated
servers. My point is that there should be something like configurator
(wizard, template or whatever) what has to help you to do initial
configuration of OS - partitions, RAID level, network configuration and
minimal OS installation, and - yes - if that is not Debian installer
then yes - you can ask technical support to provide information for the
tool they use.

Kind regards
Georgi

Re: Acentos ñ en xfce

[Henry Flores/Gmail]

El El dom, 13 de jun. de 2021 a la(s) 11:07 a. m., Camaleón <
noela...@gmail.com> escribió:

> El 2021-06-13 a las 15:47 +, Ricardo Delgado escribió:
>
> > Tengo inconvenientes con mi interfaz, cuando recibo un archivo con
> acentos y ñ siempre me da un error.
>
> (...)
>
> ¿Qué error te aparece y qué haces exactamente?
>
> Saludos,
>
> --
> Camaleón
>

Qué es tensión y formato tiene el archivo con el problema?


> --

   - * Marcos Yacila A.*
   - * Gerente General*
   - * VALTEC M SAC.*
   - * T Fijo: (511) 775 8086*
   - * Cel: 967266196*
   - * Email: ven...@valtecsac.com*

firefox scrollbar slider

[Richmond]

I have created

.mozilla/firefox//chrome/userContent.css
.mozilla/firefox//chrome/userChrome.css
.config/gtk-3.0/gtk.css  /* I think this is the one which made a difference */

and in all of them put:

scrollbar slider {
/* Size of the slider */
min-width: 32px;
min-height: 15px;
border-radius: 17px;

/* Padding around the slider */
border: 2px solid transparent;
}

And set

toolkit.legacyUserProfileCustomizations.stylesheets true

This creates a very large scroll bar on the Profile Manager, but when
the browser starts the usual narrow scroll bar is used. How do I get
wide scroll bars in the browser?

I am using the system theme in firefox.

Re: Server setup

[Polyna-Maude Racicot-Summerside]

Hi,

>> I have a choice of OS and it does a great job running Debian Buster.
>> But...
>>
>> The "standard" installation give me one partition in RAID mirror ( 3 x 2
>> To). So I get only a big root partition and nothing else
>>
>> I don't have access to my server with a KVM, so all has to be done thru
>> the network using a recovery (rescue) option. That is, I was able to
>> reboot in rescue mode, use debootstrap to populate a new system.
>>
>> Where it did fail was for the reboot.
> 
> Hi Polyna-Maude,
> 
> I didn't understand what you problems were. Using GPT partition table
> with BIOS (not UEFI) is just fine therefore you have "BIOS boot"
> partition for the second stage of Grub. If you have problems with
> partitioning or other part of initial Debian installation I recommend to
> ask OVH's support. In the past they had wizard where you can configure
> partitions. ... and don't forget to configure IPv6, according to
> statistics provided by Google, 1/3 of their users use IPv6.
> 
> Kind regards
> Georgi
> 

If you read the part of my message I've left you'll see that :

1st, I'm using a OVH server but it's provided by one-provider, so the
interface (aka Wizard) ain't the same.

2nd, I am asking how to do something using command line interface. So
don,t tell me "Hey dude, use a wizard".

3rd, regarding contacting tech support. You really think it's OVH's job
to explain to me how to install OS using network boot and a shell
interface ? I doubt

Just a little hint for life... If someone is telling you, I'm fucked
using a CLI and they seem to have a basic knowledge of what they are
doing. Then think twice and you'll get in your mind that they've already
exhausted the easy one of using a click and poop solution like a wizard.
-- 
Polyna-Maude R.-Summerside
-Be smart, Be wise, Support opensource development



OpenPGP_signature
Description: OpenPGP digital signature

Re: Touch screen monitor recommendations?

[deloptes]

Bob McGowan wrote:

> I have a use case which could use a touchscreen monitor with a standard
> desktop running Debian.
> 
> Does anyone have any recommendations for units known to work with Debian?

I have a friend that has one notebook with touch screen and debian with KDE
and there are no issues.

I suggest to check the supported hardware list on the debian home page just
to be sure

Re: cannot mount smartphone anymore

[Curt]

On 2021-06-13, Emanuel Berg  wrote:
> l0f4r0 wrote:
>
>> Removing usbguard is maybe a drastic decision, isn't?
>> Or maybe you don't want this package anymore for
>> other reasons?
>
> No, why do I need it for?

He probably assumed you installed it intentionally, and so for a reason,
as it appears to be an optional package.


> Anyway it is removed now...
>


-- 

Re: Acentos ñ en xfce

[Camaleón]

El 2021-06-13 a las 15:47 +, Ricardo Delgado escribió:

> Tengo inconvenientes con mi interfaz, cuando recibo un archivo con acentos y 
> ñ siempre me da un error.

(...)

¿Qué error te aparece y qué haces exactamente?

Saludos,

-- 
Camaleón 

Acentos ñ en xfce

[Ricardo Delgado]

Buenos dias, lista.

Tengo inconvenientes con mi interfaz, cuando recibo un archivo con acentos y ñ 
siempre me da un error.

no encuentro la forma de solucionar el inconveniente, si bien mi teclado no 
tiene la distribucion español, solucione con teclas especiales.

En la web solo encuentro referencias a ISO utf 8 locales, etc, siempre desde 
consola, o como configurar el teclado.

en mi sistema tengo 

LANG=es_AR.UTF-8
LANGUAGE=
LC_CTYPE="es_AR.UTF-8"
LC_NUMERIC="es_AR.UTF-8"
LC_TIME="es_AR.UTF-8"
LC_COLLATE="es_AR.UTF-8"
LC_MONETARY="es_AR.UTF-8"
LC_MESSAGES="es_AR.UTF-8"
LC_PAPER="es_AR.UTF-8"
LC_NAME="es_AR.UTF-8"
LC_ADDRESS="es_AR.UTF-8"
LC_TELEPHONE="es_AR.UTF-8"
LC_MEASUREMENT="es_AR.UTF-8"
LC_IDENTIFICATION="es_AR.UTF-8"
LC_ALL=


Pero, como indico mi problema no es de LOCALES, o archivos ZIP que vienen con 
acentos, sino por ej. cuando recibo un archivo por correo, o cuando sincronizo 
una unidad en la nube donde coloque archivos como los indicados, al tener un 
listado grande de archivos se me complica ir cambiando uno por uno los mismos.

Uso: XFCE, THUNAR, DEBIAN ESTABLE

Espero haberme explicado.

Gracias 

Re: Touch screen monitor recommendations?

[Thom Castermans]

> Does anyone have any recommendations for units [touchscreen monitors] known 
> to work with Debian?

I don't (except my laptop, but that does not seem to fit your use
case), but I would like to suggest asking on the mailing list of a
desktop environment or e.g. Xorg or Wayland. In the end, those need to
support a touchscreen monitor, not Debian per se.

In general I think touchscreen support is fairly good, because the
kernel supports a wide variety of touchscreen monitors and maps
touches to mouse clicks. I'm not 100% sure this is a good place to
check, but the source on GitHub [1] seems to give a pretty good
overview of supported hardware.

Hope that helps, good luck with your use case,
Thom

  [1]: https://github.com/torvalds/linux/tree/master/drivers/input/touchscreen

SOLVED: Is invoking the -locker option of xautolock to run a script known? Could I be helped with an xautolock code line please?

[Susmita/Rajib]

And CLOSED.
Not very complicated, it appears.
The line is: xautolock -time 1 -locker "./ssvr.sh"
Thank you for your support.
Best.
RKB
Etc.

Re: Is invoking the -locker option of xautolock to run a script known? Could I be helped with an xautolock code line please?

[Greg Wooledge]

On Sun, Jun 13, 2021 at 09:39:24AM -0400, The Wanderer wrote:
> If I'm parsing your rephrasing of the problem statement correctly,
> couldn't this be addressed by having the script spawn an xterm or
> similar and run the needed command(s) - perhaps in the form of another
> script - within that?

Yes, that's another way to do it.

Re: Is invoking the -locker option of xautolock to run a script known? Could I be helped with an xautolock code line please?

[Susmita/Rajib]

Solved.
Not very complicated, it appears.
The line is: xautolock -time 1 -locker "./ssvr.sh"
Thank you for your support.
Best.
RKB
Etc.

Re: Is invoking the -locker option of xautolock to run a script known? Could I be helped with an xautolock code line please?

[The Wanderer]

On 2021-06-13 at 09:14, Greg Wooledge wrote:

> On Sun, Jun 13, 2021 at 06:10:23PM +0530, Susmita/Rajib wrote:
> 
>> But I need to run the script file with xautolock.
> 
> So, let me see if I understand you.  You rambled so much that it's 
> really not clear what you're asking.  But if I'm reading this 
> sentence right, you have a shell script that requires a terminal to
> work, because you prompt the user for input and then read input from
> the terminal.
> 
> And now you would like to run this script as a child of xautolock, 
> which I'm guessing is a pure X11 client program, and does not run 
> inside a terminal.
> 
> Well, that's just a non-starter.  Throw the shell script away, and 
> write a new program that doesn't require a terminal to do its work.

If I'm parsing your rephrasing of the problem statement correctly,
couldn't this be addressed by having the script spawn an xterm or
similar and run the needed command(s) - perhaps in the form of another
script - within that?

I have a script which launches an xterm, echos a prompt, and then runs a
command which takes input and uses that input to launch another script.
It's been working fine for more than a year.

In my case the problem could probably be addressed more elegantly by
having my script invoke something like gksudo, since the command which
takes input in my case is 'su - -c "programname and arguments"', but the
design approach seems like it would generalize well to cases which
invoke other commands instead.

-- 
   The Wanderer

The reasonable man adapts himself to the world; the unreasonable one
persists in trying to adapt the world to himself. Therefore all
progress depends on the unreasonable man. -- George Bernard Shaw



signature.asc
Description: OpenPGP digital signature

Re: Server setup

[Georgi Naplatanov]

On 6/13/21 2:01 AM, Polyna-Maude Racicot-Summerside wrote:
> Hi !
> I'm renting a server with one-provider (OVH).
> 
> I have a choice of OS and it does a great job running Debian Buster.
> But...
> 
> The "standard" installation give me one partition in RAID mirror ( 3 x 2
> To). So I get only a big root partition and nothing else
> 
> I don't have access to my server with a KVM, so all has to be done thru
> the network using a recovery (rescue) option. That is, I was able to
> reboot in rescue mode, use debootstrap to populate a new system.
> 
> Where it did fail was for the reboot.
> 
> The machine doesn't seem to use EFI (like most server) and I only see
> the following partition using the automatic installer.
> 
> root@polynamaude:~# fdisk -l /dev/sda
> Disk /dev/sda: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
> Disk model: HGST HUS724020AL
> Units: sectors of 1 * 512 = 512 bytes
> Sector size (logical/physical): 512 bytes / 512 bytes
> I/O size (minimum/optimal): 512 bytes / 512 bytes
> Disklabel type: gpt
> Disk identifier: CCB4C5CB-BB03-4D36-B307-AF5B5BF830A1
> 
> Device  StartEndSectors   Size Type
> /dev/sda1  34   2008   1975 987.5K BIOS boot
> /dev/sda22009 3905976495 3905974487   1.8T Linux RAID
> /dev/sda3  3905976496 39070250711048576   512M Linux filesystem
> /dev/sda4  3907025072 3907029134   4063 2M Linux filesystem
> 
> So I can see it's a gpt table
> But I get a bit lost when it's time to use grub to setup my machine by
> remote.
> 
> Someone has a clue ?
> 
> Yes it's not a huge power horse but I plan to make it usable as a mirror
> for the community (Debian) so help will be greatly appreciated.
> 
> Thanks
> 


Hi Polyna-Maude,

I didn't understand what you problems were. Using GPT partition table
with BIOS (not UEFI) is just fine therefore you have "BIOS boot"
partition for the second stage of Grub. If you have problems with
partitioning or other part of initial Debian installation I recommend to
ask OVH's support. In the past they had wizard where you can configure
partitions. ... and don't forget to configure IPv6, according to
statistics provided by Google, 1/3 of their users use IPv6.

Kind regards
Georgi

Re: Is invoking the -locker option of xautolock to run a script known? Could I be helped with an xautolock code line please?

[Greg Wooledge]

On Sun, Jun 13, 2021 at 05:05:55PM +0530, Susmita/Rajib wrote:
> #!/bin/bash
> expr $(( i = i + 1 ))

Try one of these alternatives:

i=$((i + 1))  # This one also works in sh.
((i = i + 1)) # These two are bashisms.
((i++))

> echo "Ending..."
> echo i

Pretty sure you intended this to be echo "$i".

Re: Is invoking the -locker option of xautolock to run a script known? Could I be helped with an xautolock code line please?

[Greg Wooledge]

On Sun, Jun 13, 2021 at 06:10:23PM +0530, Susmita/Rajib wrote:
> But I need to run the script file with xautolock.

So, let me see if I understand you.  You rambled so much that it's
really not clear what you're asking.  But if I'm reading this
sentence right, you have a shell script that requires a terminal
to work, because you prompt the user for input and then read input
from the terminal.

And now you would like to run this script as a child of xautolock,
which I'm guessing is a pure X11 client program, and does not run
inside a terminal.

Well, that's just a non-starter.  Throw the shell script away, and
write a new program that doesn't require a terminal to do its work.
This could be achieved in shell by using some tool that interacts
with the user without a terminal -- say, zenity or something.  Or, you
could abandon the shell entrely, and write a Tcl/Tk application instead.

Re: cannot mount smartphone anymore

[Curt]

On 2021-06-13, l0f...@tuta.io  wrote:
>
> Otherwise, you could just add a rule authorizing your device to connect:
>
> sudo usbguard append-rule 'allow id : serial "" name "" hash 
> "" parent-hash "" with-interface XX:XX:XX'
>
> sudo usbguard list-devices
> will tell you the correct parameters (of course usbguard must be running and 
> your device connected/blocked).


 You can generate a ruleset based on your currently attached USB devices
 by executing usbguard generate-policy > /etc/usbguard/rules.conf as
 root.

https://wiki.archlinux.org/title/USBGuard

I'm for taking the route of least resistance (to my hebetude).

> Best regards,
> l0f4r0

Re: Is invoking the -locker option of xautolock to run a script known? Could I be helped with an xautolock code line please?

[Susmita/Rajib]

Corrigendum:
---
May the line, "... Hashed up the kill -STOP and -CONT parts are
unnecessarily getting me
logged out of my system ..."
be please read as:
"... Hashed up the kill -STOP and -CONT parts, as these are
unnecessarily getting me
logged out of my system ..."

I could invoke this line and have my objective fulfilled:
xautolock -time 1 -locker "xset dpms force off"

But I need to run the script file with xautolock.

Best wishes.
RKB

Is invoking the -locker option of xautolock to run a script known? Could I be helped with an xautolock code line please?

[Susmita/Rajib]

Namaste, my illustrious Team Leaders and Senior programming wizards,

Hope that the 2nd wave of Covid has not been able to dampen our
enthusiasm, and that all are safe from the virus and well. But the
loss of life and employment of many of my fellow countrymen saddens me
a great deal.

I have one minor other issue because of Covid Lockdown that is
inadvertently delayed (unrelated to this post):  getting my HCL Me
laptop serviced to clean the accumulated dust that blocks the fan and
switches off the laptop within a short time.
But this minor issue can wait as many lives could be saved by lockdown
and social distancing.

As I have said earlier too, my non-Unix non-Console background and
poor coding abilities restrict me from reading the man page.

Could I be helped with this requirement please?

My post rests for two months at the Debian Forums without any input,
here: http://forums.debian.net/viewtopic.php?f=8=149128#p736179

As said earlier too, the modified code works beautifully:
--
#!/bin/bash
echo "Usage: run the script ./ssvr.sh"
i=0
while true
do
expr $(( i = i + 1 ))
read -p "To stop press n and Enter : " -t 2 INPOOT
xset dpms force off
# kill -STOP $(pidof $1)
 sleep 2
# xset dpms force off
# kill -CONT $(pidof $1)
# sleep 2
if [ "$INPOOT" = "n" ]; then
echo "Ending..."
echo i
exit 0
fi
done
--

Hashed up the kill -STOP and -CONT parts are unnecessarily getting me
logged out of my system.

Now with the hashed up lines, the script works even better.

Best,

Rajib Bandopadhyay
Etc.

Re: Archiver mails

[Marc Chantreux]

salut,

> J'ai longtemps utilisé archivemail pour cette tâche, mais le paquet a
> été retiré de Debian. Je ne trouve pas d'alternative pour mon use case.

pour ceux qui ne connaissent pas archivemail: c'est quoi ton cas
d'usage?

cordialement,
marc

Archiver mails

[steve]

Salut,

J'ai longtemps utilisé archivemail pour cette tâche, mais le paquet a
été retiré de Debian. Je ne trouve pas d'alternative pour mon use case.

Mes mails sont au format maildir et je souhaite pouvoir créer une tâche
cron qui s'occupe de ça automatiquement.

Qu'utilisez-vous ?

Merci et bon dimanche !

Steve

Re: cannot mount smartphone anymore

[l0f4r0]

Hi,

12 juin 2021, 21:54 de moasenw...@zoho.eu:

> deloptes wrote:
>
>>> "Device is not authorized for usage", that's probably the
>>> problem, right?
>>>
>>
>> google says in context of Ubuntu - USBGuard the package is
>> also in debian - could be you have it installed?
>>
>
> I did, and when I removed it, it works again!
>
Removing usbguard is maybe a drastic decision, isn't?
Or maybe you don't want this package anymore for other reasons?

Otherwise, you could just add a rule authorizing your device to connect:

sudo usbguard append-rule 'allow id : serial "" name "" hash 
"" parent-hash "" with-interface XX:XX:XX'

sudo usbguard list-devices
will tell you the correct parameters (of course usbguard must be running and 
your device connected/blocked).

Best regards,
l0f4r0