Re: [e-smith-devinfo] OpenH323 and SME
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wed, 17 Dec 2003 04:13 am, Jeff Coleman wrote: Looking in your contribs directory I don't see this work. Since ftp.e-smith.org isn't available anymore, do you want to put it up on contribs? I think you'd be better off re-evaluating the gatekeeper options. None of them were particularly good when I last looked (which is one of the reasons why the project need fell over, and my work on this withered). OpenH323 is OK, but there has likely been some very good new work in this area in the mean time. You can safely take it over - I haven't done any work recently, and don't have any plans to do any changes in the future. Brad - -- http://lca2004.linux.org.au - I'm registered. Are you? -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.3 (GNU/Linux) iD8DBQE/4ZsUGwwszQ/PZzgRAmPOAJ0UP43DxzPcUGCyl2CfXDktuAWMXQCfc1Ti ZhjwPBm+D2N5HxNOqUZyPGM= =PCv3 -END PGP SIGNATURE- -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org
[e-smith-devinfo] OpenH323 and SME
For the last few years I've used OpenH323 on VPN'd connections between sites, with IP Phones and users with Gnomemeeting and OhPhone. I've always set up gatekeepers up on internal machines with Procomm VoIP phones looking to that as its gatekeeper. I'd love to have OpenH323 as a core package on GPL releases of SME. It's not that hard to do but it can be unreliable sometimes. Has anyone else ever played with this before ? It's saved me a lot of money in the past and it's proved to be something that allowed me to work easier and more sensibly as a startup company. The quality as well with cable/dsl users was more than adequate. Any help and advice about compiled rpm's that work happily on SME gratefully appreciated. We're all here to learn and I have $1500 of unused VoIP handsets upstairs that I would love to use properly. Dick -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] OpenH323 and SME
On Tue, 16 Dec 2003, Dick Morrell wrote: I'd love to have OpenH323 as a core package on GPL releases of SME. It's not that hard to do but it can be unreliable sometimes. Has anyone else ever played with this before ? Brad Hards has: http://www.mail-archive.com/[EMAIL PROTECTED]/msg08681.html [Don't forget that Google is your friend. (openh323+e-smith+contrib)] -- Charlie Brady [EMAIL PROTECTED] Mitel Networks Corporation http://www.mitel.com/ Phone: +1 (613) 592 5660 or 592 2122 Fax: +1 (613) 592 1175 A: Because we read from top to bottom, left to right. Q: Why should i start my reply below the quoted text? -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] OpenH323 and SME
Cheers Charlie I did use groups.google for 35 mins and came up with absolutely nothing :) On Tue, 16 Dec 2003, Charlie Brady wrote: On Tue, 16 Dec 2003, Dick Morrell wrote: I'd love to have OpenH323 as a core package on GPL releases of SME. It's not that hard to do but it can be unreliable sometimes. Has anyone else ever played with this before ? Brad Hards has: http://www.mail-archive.com/[EMAIL PROTECTED]/msg08681.html [Don't forget that Google is your friend. (openh323+e-smith+contrib)] -- Charlie Brady [EMAIL PROTECTED] Mitel Networks Corporation http://www.mitel.com/ Phone: +1 (613) 592 5660 or 592 2122 Fax: +1 (613) 592 1175 A: Because we read from top to bottom, left to right. Q: Why should i start my reply below the quoted text? -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org
RE: [e-smith-devinfo] OpenH323 and SME
Hey Brad, Looking in your contribs directory I don't see this work. Since ftp.e-smith.org isn't available anymore, do you want to put it up on contribs? -jeff -Original Message- From: Charlie Brady [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 16, 2003 10:00 AM To: Dick Morrell Cc: [EMAIL PROTECTED] Subject: Re: [e-smith-devinfo] OpenH323 and SME On Tue, 16 Dec 2003, Dick Morrell wrote: I'd love to have OpenH323 as a core package on GPL releases of SME. It's not that hard to do but it can be unreliable sometimes. Has anyone else ever played with this before ? Brad Hards has: http://www.mail-archive.com/[EMAIL PROTECTED]/msg08681.html [Don't forget that Google is your friend. (openh323+e-smith+contrib)] -- Charlie Brady [EMAIL PROTECTED] Mitel Networks Corporation http://www.mitel.com/ Phone: +1 (613) 592 5660 or 592 2122 Fax: +1 (613) 592 1175 A: Because we read from top to bottom, left to right. Q: Why should i start my reply below the quoted text? -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org
RE: [e-smith-devinfo] OpenH323 and SME
Dick, I havn't played with OpenH323 but over the last month have been playing about with SIP VOIP gateways on SME V6. I have setup Asterisk ( a full blown pabx) and SER (SIP Express Router). Asterisk worked well as a SIP gateway but is a nightmare to provision services. This would be good stand alone PABX with maybe SME as the base. SER was easy to install and has a web interface to provision users and services. It also has the ability to use a simple version of Jabber to provide Instant Messaging and presence. One of the problems I was having was connecting to or having users connect to the gateway from behind NAT. Unfortunately work got in the way and I have stopped developing this any further until after xmas. Jon Blakely Computer Troubleshooters - Howick New Zealand +64 21 232 6419 [EMAIL PROTECTED] -Original Message- From: Dick Morrell [mailto:[EMAIL PROTECTED] Sent: Wednesday, 17 December 2003 3:15 a.m. To: [EMAIL PROTECTED] Subject: [e-smith-devinfo] OpenH323 and SME For the last few years I've used OpenH323 on VPN'd connections between sites, with IP Phones and users with Gnomemeeting and OhPhone. I've always set up gatekeepers up on internal machines with Procomm VoIP phones looking to that as its gatekeeper. I'd love to have OpenH323 as a core package on GPL releases of SME. It's not that hard to do but it can be unreliable sometimes. Has anyone else ever played with this before ? It's saved me a lot of money in the past and it's proved to be something that allowed me to work easier and more sensibly as a startup company. The quality as well with cable/dsl users was more than adequate. Any help and advice about compiled rpm's that work happily on SME gratefully appreciated. We're all here to learn and I have $1500 of unused VoIP handsets upstairs that I would love to use properly. Dick -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org --- Incoming mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.551 / Virus Database: 343 - Release Date: 11/12/2003 --- Outgoing mail is certified Virus Free. Checked by AVG anti-virus system (http://www.grisoft.com). Version: 6.0.551 / Virus Database: 343 - Release Date: 11/12/2003 -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Searchable archive at http://www.mail-archive.com/devinfo%40lists.e-smith.org