Re: [dtrace-discuss] dtrace wired issue
On Jan 15, 2008 2:45 PM, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Hi Aubrey, ---snip-- setrlimit(RLIMIT_NOFILE, 0xFD7FFFDFEE80)= 0 openat(AT_FDCWD, /dev/dtrace/provider, O_RDONLY|O_NDELAY|O_LARGEFILE) = 3 fcntl(3, F_SETFD, 0x0001) = 0 fstat(3, 0xFD7FFFDFE8E0)= 0 getdents(3, 0xFD7FFF174000, 8192) (sleeping...) ---here, dtrace sleep almost 4 minutes ...and continue... How long does an ls -l /dev/dtrace/provider take? Yes, it costs almost 4 minutes. I doubt you are swapping with 2G of memory. You can run vmstat -S 2 to see if there is any swapping. I'll look a bit more... # vmstat -S 2 kthr memorypagedisk faults cpu r b w swap free si so pi po fr de sr cd -- -- -- in sy cs us sy id 0 0 0 1601116 1352560 0 0 717 2 53 0 2502 71 0 0 0 718 7222 2813 4 3 93 0 0 0 1516012 1236776 0 0 0 0 0 0 0 0 0 0 0 388 269 347 0 0 99 0 0 0 1516012 1236808 0 0 0 0 0 0 0 0 0 0 0 394 262 354 0 0 100 0 0 0 1516012 1236808 0 0 0 0 0 0 0 0 0 0 0 392 255 356 0 0 100 0 0 0 1516016 1236812 0 0 0 0 0 0 0 23 0 0 0 425 380 396 1 0 99 0 0 0 1516016 1236812 0 0 0 0 0 0 0 0 0 0 0 389 294 332 0 0 100 0 0 0 1516016 1236812 0 0 0 0 0 0 0 0 0 0 0 382 466 444 0 0 99 0 0 0 1516016 1236812 0 0 0 0 0 0 0 0 0 0 0 394 273 346 0 0 100 0 0 0 1516016 1236812 0 0 0 0 0 0 0 0 0 0 0 387 250 328 0 0 99 0 0 0 1516016 1236812 0 0 0 0 0 0 0 0 0 0 0 384 264 339 0 0 100 By the way, are you running on Indiana (just curious...). No, I'm using nevada. [EMAIL PROTECTED] /etc/release Solaris Express Community Edition snv_77 X86 Copyright 2007 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 06 November 2007 Thanks, -Aubrey ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
Aubrey Li wrote: On Jan 15, 2008 2:45 PM, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Hi Aubrey, ---snip-- setrlimit(RLIMIT_NOFILE, 0xFD7FFFDFEE80)= 0 openat(AT_FDCWD, /dev/dtrace/provider, O_RDONLY|O_NDELAY|O_LARGEFILE) = 3 fcntl(3, F_SETFD, 0x0001) = 0 fstat(3, 0xFD7FFFDFE8E0)= 0 getdents(3, 0xFD7FFF174000, 8192) (sleeping...) ---here, dtrace sleep almost 4 minutes ...and continue... How long does an ls -l /dev/dtrace/provider take? Yes, it costs almost 4 minutes. So, what does ls -l /dev/dtrace/provider show? max I doubt you are swapping with 2G of memory. You can run vmstat -S 2 to see if there is any swapping. I'll look a bit more... # vmstat -S 2 kthr memorypagedisk faults cpu r b w swap free si so pi po fr de sr cd -- -- -- in sy cs us sy id 0 0 0 1601116 1352560 0 0 717 2 53 0 2502 71 0 0 0 718 7222 2813 4 3 93 0 0 0 1516012 1236776 0 0 0 0 0 0 0 0 0 0 0 388 269 347 0 0 99 0 0 0 1516012 1236808 0 0 0 0 0 0 0 0 0 0 0 394 262 354 0 0 100 0 0 0 1516012 1236808 0 0 0 0 0 0 0 0 0 0 0 392 255 356 0 0 100 0 0 0 1516016 1236812 0 0 0 0 0 0 0 23 0 0 0 425 380 396 1 0 99 0 0 0 1516016 1236812 0 0 0 0 0 0 0 0 0 0 0 389 294 332 0 0 100 0 0 0 1516016 1236812 0 0 0 0 0 0 0 0 0 0 0 382 466 444 0 0 99 0 0 0 1516016 1236812 0 0 0 0 0 0 0 0 0 0 0 394 273 346 0 0 100 0 0 0 1516016 1236812 0 0 0 0 0 0 0 0 0 0 0 387 250 328 0 0 99 0 0 0 1516016 1236812 0 0 0 0 0 0 0 0 0 0 0 384 264 339 0 0 100 By the way, are you running on Indiana (just curious...). No, I'm using nevada. [EMAIL PROTECTED] /etc/release Solaris Express Community Edition snv_77 X86 Copyright 2007 Sun Microsystems, Inc. All Rights Reserved. Use is subject to license terms. Assembled 06 November 2007 Thanks, -Aubrey ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
On Jan 15, 2008 4:43 PM, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Aubrey Li wrote: On Jan 15, 2008 2:45 PM, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Hi Aubrey, ---snip-- setrlimit(RLIMIT_NOFILE, 0xFD7FFFDFEE80)= 0 openat(AT_FDCWD, /dev/dtrace/provider, O_RDONLY|O_NDELAY|O_LARGEFILE) = 3 fcntl(3, F_SETFD, 0x0001) = 0 fstat(3, 0xFD7FFFDFE8E0)= 0 getdents(3, 0xFD7FFF174000, 8192) (sleeping...) ---here, dtrace sleep almost 4 minutes ...and continue... How long does an ls -l /dev/dtrace/provider take? Yes, it costs almost 4 minutes. So, what does ls -l /dev/dtrace/provider show? max # ls -l /dev/dtrace/provider total 14 lrwxrwxrwx 1 root root 43 Sep 3 01:21 fasttrap - ../../../devices/pseudo/[EMAIL PROTECTED]:fasttrap lrwxrwxrwx 1 root root 33 Sep 3 01:21 fbt - ../../../devices/pseudo/[EMAIL PROTECTED]:fbt lrwxrwxrwx 1 root root 43 Sep 3 01:21 lockstat - ../../../devices/pseudo/[EMAIL PROTECTED]:lockstat lrwxrwxrwx 1 root root 49 Sep 3 01:21 lx_systrace - ../../../devices/pseudo/[EMAIL PROTECTED]:lx_systrace lrwxrwxrwx 1 root root 41 Sep 3 01:21 profile - ../../../devices/pseudo/[EMAIL PROTECTED]:profile lrwxrwxrwx 1 root root 33 Sep 3 01:21 sdt - ../../../devices/pseudo/[EMAIL PROTECTED]:sdt lrwxrwxrwx 1 root root 43 Sep 3 01:21 systrace - ../../../devices/pseudo/[EMAIL PROTECTED]:systrace err, now I got something interesting. It looks like this wired issue is caused by the ata driver bug which I reported on the opensolaris-bug mailing list. When I switch the system to the console mode(X is disabled), I got #dtrace -l snip scsi: WARNING: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],2/[EMAIL PROTECTED] (ata1): timeout: abort request, target=0 lun=0 scsi: WARNING: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],2/[EMAIL PROTECTED] (ata1): timeout: abort device, target=0 lun=0 scsi: WARNING: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],2/[EMAIL PROTECTED] (ata1): timeout: reset target, target=0 lun=0 scsi: WARNING: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],2/[EMAIL PROTECTED] (ata1): timeout: reset bus, target=0 lun=0 ID PROVIDERMODULE FUNCTION NAME 1 dtrace BEGIN 2 dtrace END 3 dtrace ERROR 4 lockstat genunix mutex_enter adaptive-acquire 5 lockstat genunix mutex_enter adaptive-block 6 lockstat genunix mutex_enter adaptive-spin 7 lockstat genunixmutex_exit adaptive-release 8 lockstat genunix mutex_destroy adaptive-release 9 lockstat genunixmutex_tryenter adaptive-acquire snip -Aubrey ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
On Jan 14, 2008 8:52 PM, Sean McGrath - Sun Microsystems Ireland [EMAIL PROTECTED] wrote: Aubrey Li stated: Every first time to run dtrace command after the system boot up, It takes a very long time to get response. But the second time is OK, as follows: # time dtrace -l /dev/null real4m8.011s user0m0.116s sys 0m2.420s This first time is probably when the kernel is loading the dtrace modules. Though still seems slow, 4 minutes. What kind of system (cpu speed etc) is the machine ? # psrinfo -vp The physical processor has 2 virtual processors (0 1) x86 (GenuineIntel 10674 family 6 model 23 step 4 clock 2400 MHz) Intel(r) CPU @ 2.40GHz So, I failed to understand the modules loading needs 4 minutes. # time dtrace -l /dev/null real0m0.632s user0m0.075s sys 0m0.553s And the second time, the dtrace modules are already loaded so less time. This makes sense to me. Any clue? Thanks, -Aubrey Regards, -- Sean. . Thanks, -Aubrey ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
On Jan 14, 2008 9:22 PM, James C. McPherson [EMAIL PROTECTED] wrote: Aubrey Li wrote: On Jan 14, 2008 8:52 PM, Sean McGrath - Sun Microsystems Ireland [EMAIL PROTECTED] wrote: Aubrey Li stated: Every first time to run dtrace command after the system boot up, It takes a very long time to get response. But the second time is OK, as follows: # time dtrace -l /dev/null real4m8.011s user0m0.116s sys 0m2.420s This first time is probably when the kernel is loading the dtrace modules. Though still seems slow, 4 minutes. What kind of system (cpu speed etc) is the machine ? # psrinfo -vp The physical processor has 2 virtual processors (0 1) x86 (GenuineIntel 10674 family 6 model 23 step 4 clock 2400 MHz) Intel(r) CPU @ 2.40GHz So, I failed to understand the modules loading needs 4 minutes. If you run dtrace -l with no args, *every* single loadable module on the system will be loaded, interrogated by dtrace and then unloaded if possible. All those attach()es and detach()es need time, as does the probe collation. So may I ask, how long dtrace -l get response on your system? And how fast the cpu speed on your system? 4 minutes, it is absolutely acceptable for me. Thanks, -Aubrey ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
On Jan 14, 2008 9:26 PM, Aubrey Li [EMAIL PROTECTED] wrote: On Jan 14, 2008 9:22 PM, James C. McPherson [EMAIL PROTECTED] wrote: Aubrey Li wrote: On Jan 14, 2008 8:52 PM, Sean McGrath - Sun Microsystems Ireland [EMAIL PROTECTED] wrote: Aubrey Li stated: Every first time to run dtrace command after the system boot up, It takes a very long time to get response. But the second time is OK, as follows: # time dtrace -l /dev/null real4m8.011s user0m0.116s sys 0m2.420s This first time is probably when the kernel is loading the dtrace modules. Though still seems slow, 4 minutes. What kind of system (cpu speed etc) is the machine ? # psrinfo -vp The physical processor has 2 virtual processors (0 1) x86 (GenuineIntel 10674 family 6 model 23 step 4 clock 2400 MHz) Intel(r) CPU @ 2.40GHz So, I failed to understand the modules loading needs 4 minutes. If you run dtrace -l with no args, *every* single loadable module on the system will be loaded, interrogated by dtrace and then unloaded if possible. All those attach()es and detach()es need time, as does the probe collation. So may I ask, how long dtrace -l get response on your system? And how fast the cpu speed on your system? 4 minutes, it is absolutely acceptable for me. err, sorry, I mean unacceptable, ;-) -Aubrey ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
On Jan 14, 2008 9:38 PM, James C. McPherson [EMAIL PROTECTED] wrote: Aubrey Li wrote: On Jan 14, 2008 9:26 PM, Aubrey Li [EMAIL PROTECTED] wrote: On Jan 14, 2008 9:22 PM, James C. McPherson [EMAIL PROTECTED] wrote: If you run dtrace -l with no args, *every* single loadable module on the system will be loaded, interrogated by dtrace and then unloaded if possible. All those attach()es and detach()es need time, as does the probe collation. So may I ask, how long dtrace -l get response on your system? And how fast the cpu speed on your system? 4 minutes, it is absolutely acceptable for me. err, sorry, I mean unacceptable, ;-) (figured that :) *** On a u20m2 $ uname -a SunOS farnarkle 5.11 snv_77 i86pc i386 i86pc $ su root -c 'time dtrace -l /dev/null' Password: real2.2 user0.1 sys 1.0 $ psrinfo -v Status of virtual processor 0 as of: 01/14/2008 23:32:17 on-line since 01/08/2008 09:11:53. The i386 processor operates at 2200 MHz, and has an i387 compatible floating point processor. Status of virtual processor 1 as of: 01/14/2008 23:32:17 on-line since 01/08/2008 09:11:56. The i386 processor operates at 2200 MHz, and has an i387 compatible floating point processor. *** on a u20 # time dtrace -l /dev/null real0m0.219s user0m0.063s sys 0m0.089s # psrinfo -v Status of virtual processor 0 as of: 01/14/2008 23:33:12 on-line since 01/14/2008 22:43:46. The i386 processor operates at 2412 MHz, and has an i387 compatible floating point processor. Status of virtual processor 1 as of: 01/14/2008 23:33:12 on-line since 01/14/2008 22:43:50. The i386 processor operates at 2412 MHz, and has an i387 compatible floating point processor. # uname -a SunOS crashburn 5.11 snv_80 i86pc i386 i86pc *** on a u60 # time dtrace -l /dev/null real4.4 user0.9 sys 3.2 # psrinfo -v Status of virtual processor 0 as of: 01/14/2008 23:47:33 on-line since 09/14/2007 21:44:39. The sparcv9 processor operates at 296 MHz, and has a sparcv9 floating point processor. Status of virtual processor 2 as of: 01/14/2008 23:47:33 on-line since 09/14/2007 21:44:41. The sparcv9 processor operates at 296 MHz, and has a sparcv9 floating point processor. # uname -a SunOS synergise 5.11 snv_71 sun4u sparc SUNW,Ultra-60 You seem to be convinced that cpu is the limiting factor. Why? No, I want to say, if your cpu is not faster than mine, but dtrace response is faster than mine, then your explanation snip All those attach()es and detach()es need time, as does the probe collation. snip is not reasonable. So, there must be something wrong on my system, but I can't figure it out so far. Thanks, -Aubrey ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
Aubrey Li wrote: On Jan 14, 2008 9:26 PM, Aubrey Li [EMAIL PROTECTED] wrote: On Jan 14, 2008 9:22 PM, James C. McPherson [EMAIL PROTECTED] wrote: If you run dtrace -l with no args, *every* single loadable module on the system will be loaded, interrogated by dtrace and then unloaded if possible. All those attach()es and detach()es need time, as does the probe collation. So may I ask, how long dtrace -l get response on your system? And how fast the cpu speed on your system? 4 minutes, it is absolutely acceptable for me. err, sorry, I mean unacceptable, ;-) (figured that :) *** On a u20m2 $ uname -a SunOS farnarkle 5.11 snv_77 i86pc i386 i86pc $ su root -c 'time dtrace -l /dev/null' Password: real2.2 user0.1 sys 1.0 $ psrinfo -v Status of virtual processor 0 as of: 01/14/2008 23:32:17 on-line since 01/08/2008 09:11:53. The i386 processor operates at 2200 MHz, and has an i387 compatible floating point processor. Status of virtual processor 1 as of: 01/14/2008 23:32:17 on-line since 01/08/2008 09:11:56. The i386 processor operates at 2200 MHz, and has an i387 compatible floating point processor. *** on a u20 # time dtrace -l /dev/null real0m0.219s user0m0.063s sys 0m0.089s # psrinfo -v Status of virtual processor 0 as of: 01/14/2008 23:33:12 on-line since 01/14/2008 22:43:46. The i386 processor operates at 2412 MHz, and has an i387 compatible floating point processor. Status of virtual processor 1 as of: 01/14/2008 23:33:12 on-line since 01/14/2008 22:43:50. The i386 processor operates at 2412 MHz, and has an i387 compatible floating point processor. # uname -a SunOS crashburn 5.11 snv_80 i86pc i386 i86pc *** on a u60 # time dtrace -l /dev/null real4.4 user0.9 sys 3.2 # psrinfo -v Status of virtual processor 0 as of: 01/14/2008 23:47:33 on-line since 09/14/2007 21:44:39. The sparcv9 processor operates at 296 MHz, and has a sparcv9 floating point processor. Status of virtual processor 2 as of: 01/14/2008 23:47:33 on-line since 09/14/2007 21:44:41. The sparcv9 processor operates at 296 MHz, and has a sparcv9 floating point processor. # uname -a SunOS synergise 5.11 snv_71 sun4u sparc SUNW,Ultra-60 You seem to be convinced that cpu is the limiting factor. Why? James C. McPherson -- Senior Kernel Software Engineer, Solaris Sun Microsystems http://blogs.sun.com/jmcp http://www.jmcp.homeunix.com/blog ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
Hi James, James C. McPherson wrote: Aubrey Li wrote: On Jan 14, 2008 8:52 PM, Sean McGrath - Sun Microsystems Ireland [EMAIL PROTECTED] wrote: Aubrey Li stated: Every first time to run dtrace command after the system boot up, It takes a very long time to get response. But the second time is OK, as follows: # time dtrace -l /dev/null real4m8.011s user0m0.116s sys 0m2.420s This first time is probably when the kernel is loading the dtrace modules. Though still seems slow, 4 minutes. What kind of system (cpu speed etc) is the machine ? # psrinfo -vp The physical processor has 2 virtual processors (0 1) x86 (GenuineIntel 10674 family 6 model 23 step 4 clock 2400 MHz) Intel(r) CPU @ 2.40GHz So, I failed to understand the modules loading needs 4 minutes. If you run dtrace -l with no args, *every* single loadable module on the system will be loaded, interrogated by dtrace and then unloaded if possible. Are you sure of this? Why should it load everything? (And then unload them if they're not being used). # dtrace -l | wc -l 88939 # modload dedump # dtrace -l | wc -l 88963 I get different counts. I think dtrace only looks at what is currently on the system. But 4 minutes??? max All those attach()es and detach()es need time, as does the probe collation. James C. McPherson -- Senior Kernel Software Engineer, Solaris Sun Microsystems http://blogs.sun.com/jmcp http://www.jmcp.homeunix.com/blog ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
On Mon, Jan 14, 2008 at 09:16:34PM +0800, Aubrey Li wrote: On Jan 14, 2008 8:52 PM, Sean McGrath - Sun Microsystems Ireland [EMAIL PROTECTED] wrote: Aubrey Li stated: Every first time to run dtrace command after the system boot up, It takes a very long time to get response. But the second time is OK, as follows: # time dtrace -l /dev/null real4m8.011s user0m0.116s sys 0m2.420s This first time is probably when the kernel is loading the dtrace modules. Though still seems slow, 4 minutes. What kind of system (cpu speed etc) is the machine ? # psrinfo -vp The physical processor has 2 virtual processors (0 1) x86 (GenuineIntel 10674 family 6 model 23 step 4 clock 2400 MHz) Intel(r) CPU @ 2.40GHz So, I failed to understand the modules loading needs 4 minutes. Yes, this is definitely fishy. Is this a highly memory constrained system? If you modunload -i 0 enough times to get dtrace(7D) unloaded (that is, dtrace doesn't appear in modinfo), does it again take 4 minutes? As you can imagine, it's a little tough to investigate this problem because we can't use DTrace to do it! ;) # time dtrace -l /dev/null real0m0.632s user0m0.075s sys 0m0.553s And 600+ milliseconds is still a long time. How many probes are we talking about here? - Bryan -- Bryan Cantrill, Sun Microsystems FishWorks. http://blogs.sun.com/bmc ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
On Mon, Jan 14, 2008 at 12:52:55PM +, Sean McGrath - Sun Microsystems Ireland wrote: Aubrey Li stated: Every first time to run dtrace command after the system boot up, It takes a very long time to get response. But the second time is OK, as follows: # time dtrace -l /dev/null real4m8.011s user0m0.116s sys 0m2.420s This first time is probably when the kernel is loading the dtrace modules. Though still seems slow, 4 minutes. What kind of system (cpu speed etc) is the machine ? The first time DTrace is loaded it needs to uncompress the CTF (type) information for all of the currently loaded kernel modules which can take quite a while. Four minutes does seem a bit excessive. Are you seeing any swapping? Adam -- Adam Leventhal, FishWorkshttp://blogs.sun.com/ahl ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
Hi James, James C. McPherson wrote: Aubrey Li wrote: On Jan 14, 2008 8:52 PM, Sean McGrath - Sun Microsystems Ireland [EMAIL PROTECTED] wrote: Aubrey Li stated: Every first time to run dtrace command after the system boot up, It takes a very long time to get response. But the second time is OK, as follows: # time dtrace -l /dev/null real4m8.011s user0m0.116s sys 0m2.420s This first time is probably when the kernel is loading the dtrace modules. Though still seems slow, 4 minutes. What kind of system (cpu speed etc) is the machine ? # psrinfo -vp The physical processor has 2 virtual processors (0 1) x86 (GenuineIntel 10674 family 6 model 23 step 4 clock 2400 MHz) Intel(r) CPU @ 2.40GHz So, I failed to understand the modules loading needs 4 minutes. If you run dtrace -l with no args, *every* single loadable module on the system will be loaded, interrogated by dtrace and then unloaded if possible. You mean every kernel module currently loaded will be interrogated. Not every kernel module on the system. So _init/_info/_fini/attach/detach should not enter into this. max All those attach()es and detach()es need time, as does the probe collation. James C. McPherson -- Senior Kernel Software Engineer, Solaris Sun Microsystems http://blogs.sun.com/jmcp http://www.jmcp.homeunix.com/blog ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org
Re: [dtrace-discuss] dtrace wired issue
Sorry for the delay(time difference). Now I got more details. # truss dtrace -l snip mmap(0x, 4096, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON, 4294967295, 0) = 0xFD7FFF18 mmap(0x0001, 24576, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, -1, 0) = 0xFD7FFF17 munmap(0xFD7FFF38, 32768) = 0 getcontext(0xFD7FFFDFE9D0) mmap(0x0001, 65536, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE|MAP_ANON|MAP_ALIGN, 4294967295, 0) = 0xFD7FFF15 getrlimit(RLIMIT_STACK, 0xFD7FFFDFED30) = 0 getpid()= 923 [922] lwp_private(0, 0, 0xFD7FFF150200) = 0x setustack(0xFD7FFF1502A8) sysconfig(_CONFIG_PAGESIZE) = 4096 sigfillset(0xFD7FFF006880) = 0 brk(0x0041B580) = 0 brk(0x0041F580) = 0 getrlimit(RLIMIT_NOFILE, 0xFD7FFFDFEE80)= 0 setrlimit(RLIMIT_NOFILE, 0xFD7FFFDFEE80)= 0 openat(AT_FDCWD, /dev/dtrace/provider, O_RDONLY|O_NDELAY|O_LARGEFILE) = 3 fcntl(3, F_SETFD, 0x0001) = 0 fstat(3, 0xFD7FFFDFE8E0)= 0 getdents(3, 0xFD7FFF174000, 8192) (sleeping...) ---here, dtrace sleep almost 4 minutes ...and continue... Any thoughts? Thanks, -Aubrey ___ dtrace-discuss mailing list dtrace-discuss@opensolaris.org