[Dx4win] QRZ CD?!!
At 09:14 PM 6/20/2006, J.F. Samuels wrote: Hamad, my QRZ always shows the countries. It is the newest, Summer 2006 and it is stored on disk. The DLL hasn't been changed since 2003. When I searched on QRZ32.DLL, I found many versions, and most were out-of-date. I have copied the newest one from QRZ to all the libraries. You seem to be using the QRZ program directly. Hamad is saying that when looking up QRZ *through* DX4WIN (F3), the county is not displayed. If I'm misunderstanding, I apologize. But it works the same way here as it does at 9K2HN - no county. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
[Dx4win] PSK31 Window and microHam DigiKeyer
Has anyone gotten the DigiKeyer to work with the PSK31 window? I keep getting errors when I assign the sound card to the DigiKeyer's sound card - says the device is already allocated. Tried changing from VOX to PTT, but no help. Seems to be centered on the sound card choice, and it being busy already. 73, Duane -- Duane Calvin, AC5AA Austin, Texas http://home.austin.rr.com/ac5aa From [EMAIL PROTECTED] Wed Jun 21 07:09:48 2006 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Wed Jun 21 07:17:23 2006 Subject: [Dx4win] QRZ CD?!! Message-ID: [EMAIL PROTECTED] At 09:14 PM 6/20/2006, J.F. Samuels wrote: Hamad, my QRZ always shows the countries. It is the newest, Summer 2006 and it is stored on disk. The DLL hasn't been changed since 2003. When I searched on QRZ32.DLL, I found many versions, and most were out-of-date. I have copied the newest one from QRZ to all the libraries. You are right, the latest version(s) of QRZ do display the COUNTRY in the F3 window. Hamad, 9K2HN was asking about the US COUNTY. That is *not* displayed at my station either. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us
[Dx4win] PSK31 Window and microHam DigiKeyer
--- Duane A Calvin [EMAIL PROTECTED] wrote: Has anyone gotten the DigiKeyer to work with the PSK31 window? I keep getting errors when I assign the sound card to the DigiKeyer's sound card - says the device is already allocated. Tried changing from VOX to PTT, but no help. Seems to be centered on the sound card choice, and it being busy already. Hi Duane, It worked for me right out of the box. It sounds like you may have a conflict on the COM port used for PTT. Check your radio, RTTY and CW preferences to make sure you are not using this COM port anywhere. Check the Control preferences to make sure you are selecting the correct PSK sound card. When you right-click somewhere in the PSK-31 window, there is a Settings option near the top of one of the menus. TX is where you set the PTT COM port. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Wed Jun 21 11:10:30 2006 From: [EMAIL PROTECTED] (Jim Reisert AD1C) Date: Wed Jun 21 11:17:50 2006 Subject: [Dx4win] FO/F6CTL Message-ID: [EMAIL PROTECTED] The latest DX4WIN country file (Release 30) does not have the right information for FO/F6CTL. FO/F6CTL/M is mapped to Marquesas, the call should be FO/F6CTL (no /M) I assume the same will happen with Austral islands. This will be fixed in Release 31. If you want to fix it yourself, close your log, then File - Databases - Countries. Find Marquesas, click on the Callsign tab, then find FO/F6CTL/M starting 20 June 2006. Change it to FO/F6CTL and click on Calls - Update (this last step is important). Do the same for Austral Islands and FO/F6CTL/A, changing it to FO/F6CTL. When you are done, File - Save Changes and Exit. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Wed Jun 21 15:44:06 2006 From: [EMAIL PROTECTED] (John Shaw) Date: Wed Jun 21 15:51:40 2006 Subject: [Dx4win] PSK31 Window and microHam DigiKeyer In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Here is a little gem that gave me some grief in this area, not related to the device you are using, but DX4WIN it self. PTT Delay: A zero value indicates that PTT keying is not used. Note this came from the help file of 7.02, couldn't find it in 7.04 but I guess it still applies. I thought DX4WIN was broken until I read that and changed the zero value. I was getting some really strange results even when not using PTT. Hope this info may be of help in your case. 73 John ZL1BYZ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Reisert AD1C Sent: Thursday, 22 June 2006 2:23 a.m. To: Duane A Calvin; dx4win@mailman.qth.net Subject: Re: [Dx4win] PSK31 Window and microHam DigiKeyer --- Duane A Calvin [EMAIL PROTECTED] wrote: Has anyone gotten the DigiKeyer to work with the PSK31 window? I keep getting errors when I assign the sound card to the DigiKeyer's sound card - says the device is already allocated. Tried changing from VOX to PTT, but no help. Seems to be centered on the sound card choice, and it being busy already. Hi Duane, It worked for me right out of the box. It sounds like you may have a conflict on the COM port used for PTT. Check your radio, RTTY and CW preferences to make sure you are not using this COM port anywhere. Check the Control preferences to make sure you are selecting the correct PSK sound card. When you right-click somewhere in the PSK-31 window, there is a Settings option near the top of one of the menus. TX is where you set the PTT COM port. 73 - Jim AD1C -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Date filter, IOTA window
Thanks for the replies! The IOTA window fix was easy. Still no luck with searching by year. When I click on Filter in the QSO Window and get the drop down menu, Selection is grayed out so I can't do anything with it. I've gone into File|Preferences|QSO|Searching and tried changing some things there but nothing differnent. I still cannot find any way or place to specify a Start Date and End Date. If I wan't to search for QSOs made in 2005, where do I type in 01/01/2005 and where do I type in 12/31/2005? What am I missing? 73, Mike K9NW A couple questions for the group: -- How can I set up a filter to search for QSOs by year? I thought it might be interesting to track how many countries, zones, etc., I've worked each year. The only examples I see seem to deal with QSL dates. I'm not concerned with that - I just want to know what I worked each of the past 10 years. Just typing in a year gets me a Value is not a valid date box. -- How do I change the available bands in the IOTA window? For DXCC, WAZ, WAS, etc., I can go to preferences and check which bands I want to show up in their respective window but I can't find any way to change the IOTA window. I'm not planning on working too many IOTAs on the 3cm band. :-) New to the list here..sorry if any of this is redundant. Thanks! 73, Mike K9NW ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Date filter, IOTA window
I'm not sure why the message below got posted again today but thanks for all the replies. I've got things working now. 73, Mike K9NW -Original Message- From: Mike Tessmer [EMAIL PROTECTED] Sent: Jun 16, 2006 7:29 AM To: REFLECTOR dx4win dx4win@mailman.qth.net Subject: Re: [Dx4win] Date filter, IOTA window Thanks for the replies! The IOTA window fix was easy. Still no luck with searching by year. When I click on Filter in the QSO Window and get the drop down menu, Selection is grayed out so I can't do anything with it. I've gone into File|Preferences|QSO|Searching and tried changing some things there but nothing differnent. I still cannot find any way or place to specify a Start Date and End Date. If I wan't to search for QSOs made in 2005, where do I type in 01/01/2005 and where do I type in 12/31/2005? What am I missing? 73, Mike K9NW A couple questions for the group: -- How can I set up a filter to search for QSOs by year? I thought it might be interesting to track how many countries, zones, etc., I've worked each year. The only examples I see seem to deal with QSL dates. I'm not concerned with that - I just want to know what I worked each of the past 10 years. Just typing in a year gets me a Value is not a valid date box. -- How do I change the available bands in the IOTA window? For DXCC, WAZ, WAS, etc., I can go to preferences and check which bands I want to show up in their respective window but I can't find any way to change the IOTA window. I'm not planning on working too many IOTAs on the 3cm band. :-) New to the list here..sorry if any of this is redundant. Thanks! 73, Mike K9NW ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win