The step should say black, not zinc.
Additional 3/16 screws are supplied with your filters, one per filter.
Ron AC7AC
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Paul Ferguson
Sent: Friday, October 10, 2008 11:55 AM
To: Elecraft@mailman.qth.net
Cc: [EMAIL PROTECTED]
Subject: [Elecraft] K3: Error in KRX3 installation instructions?
I am in the middle of installing my KRX3 and came to a point where I do not
have enough of the correct screws remaining. I am using KRX3 Installation
and
Operation manual Rev B (Aug 20, 2008) and Errata Rev B-2 (Sep 30, 2008).
My inventory matched the manual as modified by the Errata. I might have used
the wrong screws somewhere, so I went back thru the steps keeping track of
what
the steps say I should have used.
I came to a problem on page 31, step 2. It calls for two 4-40 3/16 zinc pan
head screws. The inventory does not list any of the above screws. There are
zinc pan head 4-40, 1/4 and black pan head 4-40 3/16 screws. I do not know
if
I used zinc 1/4 or black 3/16 during this step. What should this step say?
Paul Ferguson
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
