Re: [Elecraft] KPA1500 issue

2020-08-03 Thread Jack Brindle via Elecraft
What is the context for this email? What is the issue?

73!
Jack, W6FB

> On Aug 3, 2020, at 10:22 AM, wa6...@arrl.net wrote:
> 
> I had something like that happen with my KPA1500.  The way to fix it is to 
> unplug the amp, and plug it in.
> 
> This happened to me when we had a SHORT power outage (both my K3s and KPA1500 
> were on).  The Amps fans went on high and the control head
> power switch didn't turn it off, even the switch on the PS didn't turn it off 
> (I think).
> 
> I opened a ticket, #0479,  with Elecraft support In January.  Same 10v issue. 
>  Sent them logs, blah blah.  No resolution and no further communication.
> 
> I THINK there is some sort of problem with the line that communicates between 
> the K3 and KPA1500.  This issue is initiated by a very brief power outage. I 
> was able to duplicate the problem.
> 
> I sent all the info to Support, on how to duplicate the problem, but they 
> never replied...
> 
> Bottom line, the TEMPORARY fix is to 1. turn off the K3, 2. Unplug the Amp.  
> Plug amp back in, and power up k3 (which should also power up the
> KPA1500).
> I have a UPS on the K3, but not the Amp (for obvious reasons).
> 
> Hopefully, Elecraft will eventually fix this issue.
> 
> 73
> Nigel
> Wa6MSE
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrin...@me.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 


[Elecraft] KPA1500 issue

2020-08-03 Thread wa6mse
I had something like that happen with my KPA1500.  The way to fix it is 
to unplug the amp, and plug it in.


This happened to me when we had a SHORT power outage (both my K3s and 
KPA1500 were on).  The Amps fans went on high and the control head
power switch didn't turn it off, even the switch on the PS didn't turn 
it off (I think).


I opened a ticket, #0479,  with Elecraft support In January.  Same 10v 
issue.  Sent them logs, blah blah.  No resolution and no further 
communication.


I THINK there is some sort of problem with the line that communicates 
between the K3 and KPA1500.  This issue is initiated by a very brief 
power outage. I was able to duplicate the problem.


I sent all the info to Support, on how to duplicate the problem, but 
they never replied...


Bottom line, the TEMPORARY fix is to 1. turn off the K3, 2. Unplug the 
Amp.  Plug amp back in, and power up k3 (which should also power up the

KPA1500).
I have a UPS on the K3, but not the Amp (for obvious reasons).

Hopefully, Elecraft will eventually fix this issue.

73
Nigel
Wa6MSE

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPA1500 issue

2020-07-25 Thread Michael Coslo
Good evening all.

We have a K3S Setup with the K3S, panadpter, secondary knob, and a KPA1500.

The amp has recently started something weird. When turned off, it will power 
cycle on for about a second, then turn off and repeat. The cooling fan comes on 
full speed, although nothing is warm. Turned on, it seems to act normally, 
although I didn’t press the issue much, just tuned into the antenna with low 
power. 

I did update to the latest firmwear, I know that part  works. 

Looking at the fault log, I notice it mentions 10Volts, but I’m not certain how 
to interpret the rest of it. Possibly a fault in there somewhere. 

I do have a report into Elecraft, but I submitted it Friday afternoon, and a 
good chance there wasn’t anyone there at the time, and haven’t heard back yet.

Anyone have anything similar happen?

- 73 N3LI - 
- Michael Coslo -
Frequency Coordinator, Beaver Stadium
814-404-3991
m...@psu.edu
mjcn...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KPA1500 issue

2018-05-31 Thread Carl Yaffey
While calling CQ in 6m, I glanced at the LCD and saw that it was lit up but 
blank. Pushing edit and status didn’t restore it. Turning off and back on did. 
??

Carl Yaffey  K8NU
Recording studio.
cyaffeyno_s...@gmail.com 
614 268 6353, Columbus OH
http://www.carl-yaffey.com
http://www.grassahol.com
http://www.bluesswing.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com