Being one of those clogging the reflector recently with cries of help,
let me put it in context.
In building the base kit I experienced only 3 problems:
I had a poor solder joint that kept me from getting the right AGC
voltage but the troubleshooting guide led me to it almost immediately.
The second problem was that I was getting less resistance than
indicated when doing the RF board. It turned out that I had a solder
connection that touched the case of one of the transistors and it
'shorted' that path out. Took me a while to find it but it was just a
small mistake, anyone would find it given a little time.
The third problem was that I mis-identified two diodes and
inadvertantly swapped them. Doing a careful inventory at the beginning
would have prevented that from happening.
The other thing I have asked for help on turned out to be me not
following the instructions properly, forgetting to take out a capacitor
when installing the SSB board.
So, 1 bad solder joint, 1 shorted solder joint, 1 parts
misidentification and 1 not following instructions. Each of them was
not hard to find and with the experts on the list, they can almost tell
you what you've done!
Do not worry about building the kit, its really easy and turns out that
its so much fun you want to keep building more!
73 de k3nc
On Feb 22, 2005, at 10:18 PM, [EMAIL PROTECTED] wrote:
Hello to everyone on the Elecraft Reflector. I subscribed to the
Reflector
alittle over a week ago and have really enjoyed all the posts. It is
good to
know that there are alot of really talented people out there who will
be able to
help me if and when I get in trouble building the K2. I will be
ordering my K2
in the next couple of days. I would be interested to know if there is
someone
in the Massachusetts area that has a K2 that could offer some help.
Boy some
of the problems I have been seeing are making me get second thoughts.
Steve Terry
W1KV
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
