Re: [e-users] screen setup error
On 4/6/23 00:51, Carsten Haitzler wrote: On Wed, 5 Apr 2023 14:49:28 -0400 mh via enlightenment-users said: On 4/5/23 12:43, Carsten Haitzler wrote: On Tue, 4 Apr 2023 20:22:32 -0400 mh via enlightenment-users said: I'm just back to using E after a while, using 0.25.4 from Debian sid. After first logging in, and every time after resuming from screensaver/blanking, I get the pop-up error message: "You seem to have no screens configured to be on the given outputs you have. This should be fixed by going to: Settings-Screen-Screen Setup." is this a laptop? did you have the lid closed? it's a desktop, 4080 gpu, evil NVIDIA driver version 530.30.02 installed this would imply the nvidia driver is unplugging all screens ever time the screen goes into dpms. check your logs as per previous email and see. all lines going RRR: will have to do with randr screen stuff. Not sure which log to check. I looked at Xorg.0.log but didn't see anything with RRR. I was going to uninstall the nvidia drivers and try it with nouveau but having problems with X starting. Not sure if nouveau supports rtx4080 yet. When I do that, there is a list showing two DP-4 outputs where the monitor is connected, and a third that lists the monitor. But the only one that I can set the screen setup settings for is the first DP-4. What do I need to do to setup the monitor to the output properly? what? multiple DP-4's - that shouldnt happen. you should have all outputs named differently. does xrandr (commandline) also list multiple dp-4's? only one DP-4 with xrandr. this is the output: $ xrandr Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767 HDMI-0 disconnected primary (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) DP-2 disconnected (normal left inverted right x axis y axis) DP-3 disconnected (normal left inverted right x axis y axis) DP-4 connected 3840x2160+0+0 (normal left inverted right x axis y axis) 708mm x 399mm 3840x2160 60.00*+ 144.00 120.00 119.88 59.94 50.00 29.97 2560x1440 143.97 120.00 59.95 1920x1080 143.85 119.88 60.00 59.94 1680x1050 59.95 1440x900 59.89 1280x1024 75.02 60.02 1280x960 60.00 1280x720 119.88 60.00 59.94 50.00 1152x864 75.00 1024x768 75.03 70.07 60.00 800x600 75.00 72.19 60.32 56.25 720x576 50.00 720x480 59.94 640x480 75.00 72.81 59.94 59.93 DP-5 disconnected (normal left inverted right x axis y axis) are you sure dp-4 is listed twice and it isn't just the hoversel showing the selected one at the top in addition to the set of possible selections below? I see DP-4 listed twice, then 32UHD144. If I hover/click over the first DP-4 I see a DP-4, indented and selectable. But the second one remains after I select a resolution and hit apply. The 32UHD144 entry is never selectable. ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] screen setup error
On Thu, 6 Apr 2023 15:56:57 -0400 mh via enlightenment-users said: > > On 4/6/23 00:51, Carsten Haitzler wrote: > > On Wed, 5 Apr 2023 14:49:28 -0400 mh via enlightenment-users > > said: > > > >> On 4/5/23 12:43, Carsten Haitzler wrote: > >>> On Tue, 4 Apr 2023 20:22:32 -0400 mh via enlightenment-users > >>>said: > >>> > I'm just back to using E after a while, using 0.25.4 from Debian sid. > After first logging in, and every time after resuming from > screensaver/blanking, I get the pop-up error message: "You seem to have > no screens configured to be on the given outputs you have. This should > be fixed by going to: Settings-Screen-Screen Setup." > >>> is this a laptop? did you have the lid closed? > >> it's a desktop, 4080 gpu, evil NVIDIA driver version 530.30.02 installed > > this would imply the nvidia driver is unplugging all screens ever time the > > screen goes into dpms. check your logs as per previous email and see. all > > lines going RRR: will have to do with randr screen stuff. > > Not sure which log to check. I looked at Xorg.0.log but didn't see > anything with RRR. I was going to uninstall the nvidia drivers and try > it with nouveau but having problems with X starting. Not sure if nouveau > supports rtx4080 yet. ~/.e-log.log > When I do that, there is a list showing two DP-4 outputs where the > monitor is connected, and a third that lists the monitor. But the only > one that I can set the screen setup settings for is the first DP-4. What > do I need to do to setup the monitor to the output properly? > >>> what? multiple DP-4's - that shouldnt happen. you should have all outputs > >>> named differently. does xrandr (commandline) also list multiple dp-4's? > >> only one DP-4 with xrandr. this is the output: > >> > >> $ xrandr > >> Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767 > >> HDMI-0 disconnected primary (normal left inverted right x axis y axis) > >> DP-0 disconnected (normal left inverted right x axis y axis) > >> DP-1 disconnected (normal left inverted right x axis y axis) > >> DP-2 disconnected (normal left inverted right x axis y axis) > >> DP-3 disconnected (normal left inverted right x axis y axis) > >> DP-4 connected 3840x2160+0+0 (normal left inverted right x axis y axis) > >> 708mm x 399mm > >> 3840x2160 60.00*+ 144.00 120.00 119.88 59.94 50.00 29.97 > >> 2560x1440 143.97 120.00 59.95 > >> 1920x1080 143.85 119.88 60.00 59.94 > >> 1680x1050 59.95 > >> 1440x900 59.89 > >> 1280x1024 75.02 60.02 > >> 1280x960 60.00 > >> 1280x720 119.88 60.00 59.94 50.00 > >> 1152x864 75.00 > >> 1024x768 75.03 70.07 60.00 > >> 800x600 75.00 72.19 60.32 56.25 > >> 720x576 50.00 > >> 720x480 59.94 > >> 640x480 75.00 72.81 59.94 59.93 > >> DP-5 disconnected (normal left inverted right x axis y axis) > > are you sure dp-4 is listed twice and it isn't just the hoversel showing the > > selected one at the top in addition to the set of possible selections below? > I see DP-4 listed twice, then 32UHD144. If I hover/click over the first > DP-4 I see a DP-4, indented and selectable. But the second one remains > after I select a resolution and hit apply. The 32UHD144 entry is never > selectable. can you share screenshots? > >> ___ > >> enlightenment-users mailing list > >> enlightenment-users@lists.sourceforge.net > >> https://lists.sourceforge.net/lists/listinfo/enlightenment-users > ___ > enlightenment-users mailing list > enlightenment-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/enlightenment-users -- - Codito, ergo sum - "I code, therefore I am" -- Carsten Haitzler - ras...@rasterman.com ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] screen setup error
On 4/6/23 18:09, Carsten Haitzler wrote: On Thu, 6 Apr 2023 15:56:57 -0400 mh via enlightenment-users said: On 4/6/23 00:51, Carsten Haitzler wrote: On Wed, 5 Apr 2023 14:49:28 -0400 mh via enlightenment-users said: On 4/5/23 12:43, Carsten Haitzler wrote: On Tue, 4 Apr 2023 20:22:32 -0400 mh via enlightenment-users said: I'm just back to using E after a while, using 0.25.4 from Debian sid. After first logging in, and every time after resuming from screensaver/blanking, I get the pop-up error message: "You seem to have no screens configured to be on the given outputs you have. This should be fixed by going to: Settings-Screen-Screen Setup." is this a laptop? did you have the lid closed? it's a desktop, 4080 gpu, evil NVIDIA driver version 530.30.02 installed this would imply the nvidia driver is unplugging all screens ever time the screen goes into dpms. check your logs as per previous email and see. all lines going RRR: will have to do with randr screen stuff. Not sure which log to check. I looked at Xorg.0.log but didn't see anything with RRR. I was going to uninstall the nvidia drivers and try it with nouveau but having problems with X starting. Not sure if nouveau supports rtx4080 yet. ~/.e-log.log yes, a LOT of RRR messages... Seem to be several sections where the screens are "reconfigure screens due to event..." That must nvidia unplugging the screens. So if I use nouveau should that stop that? When I do that, there is a list showing two DP-4 outputs where the monitor is connected, and a third that lists the monitor. But the only one that I can set the screen setup settings for is the first DP-4. What do I need to do to setup the monitor to the output properly? what? multiple DP-4's - that shouldnt happen. you should have all outputs named differently. does xrandr (commandline) also list multiple dp-4's? only one DP-4 with xrandr. this is the output: $ xrandr Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767 HDMI-0 disconnected primary (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) DP-2 disconnected (normal left inverted right x axis y axis) DP-3 disconnected (normal left inverted right x axis y axis) DP-4 connected 3840x2160+0+0 (normal left inverted right x axis y axis) 708mm x 399mm 3840x2160 60.00*+ 144.00 120.00 119.88 59.94 50.00 29.97 2560x1440 143.97 120.00 59.95 1920x1080 143.85 119.88 60.00 59.94 1680x1050 59.95 1440x900 59.89 1280x1024 75.02 60.02 1280x960 60.00 1280x720 119.88 60.00 59.94 50.00 1152x864 75.00 1024x768 75.03 70.07 60.00 800x600 75.00 72.19 60.32 56.25 720x576 50.00 720x480 59.94 640x480 75.00 72.81 59.94 59.93 DP-5 disconnected (normal left inverted right x axis y axis) are you sure dp-4 is listed twice and it isn't just the hoversel showing the selected one at the top in addition to the set of possible selections below? I see DP-4 listed twice, then 32UHD144. If I hover/click over the first DP-4 I see a DP-4, indented and selectable. But the second one remains after I select a resolution and hit apply. The 32UHD144 entry is never selectable. can you share screenshots? e-screen-setup1 is first going to Screen Setup, e-screen-setup2 is after clicking on the top DP-4. ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] screen setup error
On 4/6/23 18:09, Carsten Haitzler wrote: On Thu, 6 Apr 2023 15:56:57 -0400 mh via enlightenment-users said: On 4/6/23 00:51, Carsten Haitzler wrote: On Wed, 5 Apr 2023 14:49:28 -0400 mh via enlightenment-users said: On 4/5/23 12:43, Carsten Haitzler wrote: On Tue, 4 Apr 2023 20:22:32 -0400 mh via enlightenment-users said: I'm just back to using E after a while, using 0.25.4 from Debian sid. After first logging in, and every time after resuming from screensaver/blanking, I get the pop-up error message: "You seem to have no screens configured to be on the given outputs you have. This should be fixed by going to: Settings-Screen-Screen Setup." is this a laptop? did you have the lid closed? it's a desktop, 4080 gpu, evil NVIDIA driver version 530.30.02 installed this would imply the nvidia driver is unplugging all screens ever time the screen goes into dpms. check your logs as per previous email and see. all lines going RRR: will have to do with randr screen stuff. Not sure which log to check. I looked at Xorg.0.log but didn't see anything with RRR. I was going to uninstall the nvidia drivers and try it with nouveau but having problems with X starting. Not sure if nouveau supports rtx4080 yet. ~/.e-log.log yes, a LOT of RRR messages... Seem to be several sections where the screens are "reconfigure screens due to event..." That must nvidia unplugging the screens. So if I use nouveau should that stop that? When I do that, there is a list showing two DP-4 outputs where the monitor is connected, and a third that lists the monitor. But the only one that I can set the screen setup settings for is the first DP-4. What do I need to do to setup the monitor to the output properly? what? multiple DP-4's - that shouldnt happen. you should have all outputs named differently. does xrandr (commandline) also list multiple dp-4's? only one DP-4 with xrandr. this is the output: $ xrandr Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767 HDMI-0 disconnected primary (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) DP-2 disconnected (normal left inverted right x axis y axis) DP-3 disconnected (normal left inverted right x axis y axis) DP-4 connected 3840x2160+0+0 (normal left inverted right x axis y axis) 708mm x 399mm 3840x2160 60.00*+ 144.00 120.00 119.88 59.94 50.00 29.97 2560x1440 143.97 120.00 59.95 1920x1080 143.85 119.88 60.00 59.94 1680x1050 59.95 1440x900 59.89 1280x1024 75.02 60.02 1280x960 60.00 1280x720 119.88 60.00 59.94 50.00 1152x864 75.00 1024x768 75.03 70.07 60.00 800x600 75.00 72.19 60.32 56.25 720x576 50.00 720x480 59.94 640x480 75.00 72.81 59.94 59.93 DP-5 disconnected (normal left inverted right x axis y axis) are you sure dp-4 is listed twice and it isn't just the hoversel showing the selected one at the top in addition to the set of possible selections below? I see DP-4 listed twice, then 32UHD144. If I hover/click over the first DP-4 I see a DP-4, indented and selectable. But the second one remains after I select a resolution and hit apply. The 32UHD144 entry is never selectable. can you share screenshots? yes. first link is going to Screen Setup, second is after clicking on the top DP-4. https://photos.google.com/photo/AF1QipM8OYjS0AnHNV90FNcbv9DAI0JFFyhCdBhqPe-c https://photos.google.com/photo/AF1QipOumJflDikhPa3-xJkNIhGBuXyuLt7y9qZJl35_ ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
Re: [e-users] screen setup error
sorry about the google picture post... what's the best way to get those screenshots to you? On 4/6/23 19:36, mh via enlightenment-users wrote: On 4/6/23 18:09, Carsten Haitzler wrote: On Thu, 6 Apr 2023 15:56:57 -0400 mh via enlightenment-users said: On 4/6/23 00:51, Carsten Haitzler wrote: On Wed, 5 Apr 2023 14:49:28 -0400 mh via enlightenment-users said: On 4/5/23 12:43, Carsten Haitzler wrote: On Tue, 4 Apr 2023 20:22:32 -0400 mh via enlightenment-users said: I'm just back to using E after a while, using 0.25.4 from Debian sid. After first logging in, and every time after resuming from screensaver/blanking, I get the pop-up error message: "You seem to have no screens configured to be on the given outputs you have. This should be fixed by going to: Settings-Screen-Screen Setup." is this a laptop? did you have the lid closed? it's a desktop, 4080 gpu, evil NVIDIA driver version 530.30.02 installed this would imply the nvidia driver is unplugging all screens ever time the screen goes into dpms. check your logs as per previous email and see. all lines going RRR: will have to do with randr screen stuff. Not sure which log to check. I looked at Xorg.0.log but didn't see anything with RRR. I was going to uninstall the nvidia drivers and try it with nouveau but having problems with X starting. Not sure if nouveau supports rtx4080 yet. ~/.e-log.log yes, a LOT of RRR messages... Seem to be several sections where the screens are "reconfigure screens due to event..." That must nvidia unplugging the screens. So if I use nouveau should that stop that? When I do that, there is a list showing two DP-4 outputs where the monitor is connected, and a third that lists the monitor. But the only one that I can set the screen setup settings for is the first DP-4. What do I need to do to setup the monitor to the output properly? what? multiple DP-4's - that shouldnt happen. you should have all outputs named differently. does xrandr (commandline) also list multiple dp-4's? only one DP-4 with xrandr. this is the output: $ xrandr Screen 0: minimum 8 x 8, current 3840 x 2160, maximum 32767 x 32767 HDMI-0 disconnected primary (normal left inverted right x axis y axis) DP-0 disconnected (normal left inverted right x axis y axis) DP-1 disconnected (normal left inverted right x axis y axis) DP-2 disconnected (normal left inverted right x axis y axis) DP-3 disconnected (normal left inverted right x axis y axis) DP-4 connected 3840x2160+0+0 (normal left inverted right x axis y axis) 708mm x 399mm 3840x2160 60.00*+ 144.00 120.00 119.88 59.94 50.00 29.97 2560x1440 143.97 120.00 59.95 1920x1080 143.85 119.88 60.00 59.94 1680x1050 59.95 1440x900 59.89 1280x1024 75.02 60.02 1280x960 60.00 1280x720 119.88 60.00 59.94 50.00 1152x864 75.00 1024x768 75.03 70.07 60.00 800x600 75.00 72.19 60.32 56.25 720x576 50.00 720x480 59.94 640x480 75.00 72.81 59.94 59.93 DP-5 disconnected (normal left inverted right x axis y axis) are you sure dp-4 is listed twice and it isn't just the hoversel showing the selected one at the top in addition to the set of possible selections below? I see DP-4 listed twice, then 32UHD144. If I hover/click over the first DP-4 I see a DP-4, indented and selectable. But the second one remains after I select a resolution and hit apply. The 32UHD144 entry is never selectable. can you share screenshots? yes. first link is going to Screen Setup, second is after clicking on the top DP-4. https://photos.google.com/photo/AF1QipM8OYjS0AnHNV90FNcbv9DAI0JFFyhCdBhqPe-c https://photos.google.com/photo/AF1QipOumJflDikhPa3-xJkNIhGBuXyuLt7y9qZJl35_ ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users ___ enlightenment-users mailing list enlightenment-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/enlightenment-users
