Re: [Flexradio] FLEX-5000A for sale.
My offer is $100, you did not say, best REASONABLE offer. On Sunday, June 22, 2014 6:14 PM, Ray, K9DUR k9...@rnacs.com wrote: My FLEX-5000A is still available for sale. It has RX2 ATU, but no VHF/UHF module. A Granite Digital Firewire cable is included. Asking price is $2300 or best offer. Price includes shipping to the lower 48. For more information, contact me off-list at k9...@arrl.net. 73, Ray, K9DUR http://k9dur.info/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] Power Supply Advice
Hobbyking would not process my order, said the zip code must be numerical, which it was. On the $300 power supply Amazon said, Usually ships within 1 to 2 months, really 1-2 months? On Thursday, June 12, 2014 7:07 PM, Michael Walker va...@portcredit.net wrote: Yep, you could do that. But, I had a $1000 12v 50 amp commercial supply fail at my repeater site (not lightning related) and it took out 5 repeaters. The name of the PS fails me at the moment. So, it can happen at any level. The point is all hardware fails and there are no guarantees. Like others, I have many astrons that have never been turned off (almost) for almost decades. Not one of them have taken out a radio. If you are really really concerned, run off a 12v battery and then float charge that. That is the closest to a solid solution and you'll never have an overvoltage issue. There is no end to this discussion, so can we end it? Mike va3mw On Thu, Jun 12, 2014 at 6:04 PM, amsct...@comcast.net wrote: And if you chase down schematics for these: http://www.repeater-builder.com/astron/pdf/astron-rs35m-annotated.pdf ...you see a very rudimentary, SCR-crowbar, non-temperature compensated hobby supply. Why not pay an another $100 to better protect a $7K radio? Mike - N8MSA - Forwarded Message - From: ross stenberg ross.stenb...@charter.net To: FlexRadio@flex-radio.biz flexradio@flex-radio.biz Sent: Thursday, June 12, 2014 5:14:31 PM Subject: Re: [Flexradio] Power Supply Advice Just to be a devil's advocate, if you take the time to read most of the 236 reviews ( I got bored at about 50) for the RS-35A M there are many testimoials of has been used for 10, 15,18 or 20+ years without fail. Some have never been turned off. Sure there are some failures but it does not appear to be a prevalent occurrence. For what it’s worth I have one but use the Icom PS-125 switcher instead to power my Flex. Several years ago they were plentiful since they gave them away with the 756 PRO series radio and I prefer its size. 73 Ross K9COX Sent from Windows Mail ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] drawback of F6500 compared to F5K
What's missing? On Tuesday, May 20, 2014 2:25 PM, Michael Walker va...@portcredit.net wrote: I just got my 6300 and I'm impressed so far. One of the first things that I tested with the monitor and it works! Not like my 5000 or 3000. I love the much wider spectrum view, especially for watching 6M for openings. Very cool. There are also much less 'fake' spurs. SmartSDR is different, but much cleaner. There is still a few things missing, but I hope they will come. I'm glad I made the move. Mike va3mw On Fri, May 16, 2014 at 9:56 PM, John Vandenberg jvandenbe...@shaw.cawrote: Here are my negatives for upgrading from F5K to F6300 - Cannot use my external frequency atomic reference. So will loose accurecy - will have to give up my VHF UHF capabilities John, ve3dvv From: w...@reagan.com To: FlexRadio@flex-radio.biz Sent: Wednesday, May 14, 2014 10:44:35 AM Subject: [Flexradio] to order a 6300 or not. ?? ? ? ?I have had Flex rigs from the first 1000 kit to my current 5000a. I have downloaded all the spec sheets, that are out there, and read all the beta testing remarks from the various testers. None of which really tell me much about how the 6300 will work out in the real world,under day to day hamming. I have not seen any comparisons to the performance of the 6300/5000a, weather they be suggested improvements over the 5000a or even improvements based on the new 6300's technology. ?? ? ? ? The 6300, looks great on paper and the engineering write-ups, but what will I gain in REAL LIFEday to day operation over my 5000a. Iam not a con tester, like to work dx and also rag chew. I do little CW any longer,arthritis in the fingers,the 5000a could be easily passed up, for this mode. ?? ? ? ?I already have a big investment in the computer,I-7 ,to run the 5000a, which of course would run the 6300 also,so thats a wash. I like the audio on my 5000a, use a balanced condenser mic and have received comments on the pleasant audio. Would have to go back to the unbalanced on the 6300. ?? ? ? ? I run a hex beam and do not need the tuner ,but I also run a vertical and a OCF dipole for 160 to 80 meters which I do need the tuner on the 5000a for. ?? ? ? ? ?I guess Iam looking for reasons to dump the 5000a and move UP to the 6300,so far Iam not seeing many,other than being the first guy on the block to buy the new model car. ?? ? ? ? ?Thanks for reading,would like to hear other guys thoughts on the subject. 73 dale wt4t ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
[Flexradio] For Sale FLEX-3000
For Sale Flex 3000 Excellent condition. With Firewire Card, Firewire cable, Full Manual Flex Control (external tuning knob) Original Box. $1350 Shipped - Burt Cohen, W3GG w...@comcast.net - ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
[Flexradio] Flex 5000A for sale
Particulars: Flex 5000A with ATU Flex 5000A with ATU See it operate: https://www.youtube.com/watch?v=1JCOR_lbTzI I am moving up to the 6000 series. 181035 $2000 plus $30 s... View on forums.qrz.com Preview by Yahoo ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz To opt out of the Reflector: http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Re: [Flexradio] DSP NR
From Real life: The scope is NOTHING like a real scope, try to use it on AM to monitor either your or the other stations AM envelope. I agree with comments about NR, useless. On Sunday, February 23, 2014 10:35 PM, Jay n...@no5j.org wrote: The Scope display is also useful when used while adjusting the useless NR button. I like the Scope display i like the Pan_A_Scope display even more. I don't see much use for the histogram and phase2 displays though. What are they for? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] SWR and AM carrier
I bought a Valiant for AM thinking it was the king of AM however my Flex 5000 got better reports. AM and the hams that use it are of generally higher caliber than the average ham. Also they don't say in 30 seconds 59 QSL via buro, HI HI what a beautiful day. There is meat in their conversation and their transmitters. On Monday, February 24, 2014 6:49 PM, Jay Bromley jayw5...@cox.net wrote: Hi Bill, Flex did it right and understands AM! When in AM 100% modulation peaks is 4 times the carrier or twice the voltage and current on scope with symmetrical modulation. So it is simple, if you had a 200 watt final you could go up to 50 watts of carrier and modulate it 100% with a 200 watt PA. If you had a 100 watt final and ran it at 100 watts you will have no headroom for the modulation, you would need a PA of at least 400 watts, that is symmetrical modulation only! 73 de w5jay.. -Original Message- From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of William and Susan Sent: Monday, February 24, 2014 4:50 PM To: FlexRadio@flex-radio.biz Subject: [Flexradio] SWR and AM carrier First, the SWR meter on the radio program itself is always reading a 0:1 no matter what the real swr is. Now, I have deliberately set my swr way up high yet the meter tells me it is fine. IT IS NOT. Good thing I have an swr meter on my external tuner and my Amp meter and my sit alone meter. Second, In the set up program it has set my AM carrier for 25 watts yet the Manual has it has 100 watts. Anyone know why? AM is my mode of choice. I do not care how much space it takes, it is the Greatest Mode. lol Thanks Bill ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] DSP NR
One thing almost as useless is the scope. On Sunday, February 23, 2014 6:24 PM, David Edwards w...@verizon.net wrote: I have been using the Flex 5K with Win7 64bit running on an i7 with 12 gb memory for about 5 years now. Have upgraded software at least 4 major revisions now running v2.7.2 PowerSDR. This is an awsome radio and my best radio. Currently have 2 other HF radios: IC7800 and TS2000 and have had many Kenwood and Yaesu radios over the years. There is one area where the Flex 5K falls down and has not really ever worked. The DSP noise reduction is useless. Over the years I have not seen any situation where switching on NR improves the ability to copy a weak signal. The IC7800 DSP NR is FAR superior. When I purchased the Flex at the Boxborough Ma hamfest the canned demonstration showed incredible signal improvement using NR. So I wonder when the NR will ever be improved to at least the usable state. BTW I’ve tried every conceivable setting on the DSP and Audio config. pages, have lots of processing power and lots of experience with SDR’s. I work with the most expensive SDR everyday of the week at my job: The General Dynamics DMR, at $500K per copy this isn’t comparable but my point is I’m not new to SDR. That said if I’m missing something I’d like to hear from others who may have had a different experience. Again I think this is a great radio just not great DSP NR. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] DSP NR
Bandscope? band bust? Do you mean Panadapter? On Sunday, February 23, 2014 9:30 PM, Julius Jones (Prodigy) w2...@prodigy.net wrote: I do not how you use the bandscope but I find it very useful. Not only can I look at is the band bust and quickly find a free frequency. I can look at someone's audio and see where the highs and lows roll off. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] A deal on a Flex 5000
http://www.ebay.com/itm/FlexRadio-FLEX-5000A-transceiver-with-opt-2nd-receiver-and-ATU-installed-/301079498857?_trksid=p2056016.l4276$1995 and includes 2nd receiver / ATU I am tempted to buy for myself but how many 5000s does one need? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Mic recommendations
I had a Heil 781 and got better reports with a D-104. All mikes used with my 5000 got reports of being bassy until I skewed the response WAY WAY down on the low frequencies On Thursday, January 9, 2014 6:13 PM, William H. Fite omni...@gmail.com wrote: Obviously (at least I hope it was obvious), I was being facetious about using a Neumann 150, which currently runs on the order of $6500 a copy. I'm a happy Heil owner and I agree that Bob has done the amateur community a great service over the years. But...so often we speak to each other as if the only choices were Heil or some ten cent POS that it is wise to remind ourselves once in a while that there are many, many mics out there, including relatively inexpensive studio mics that will beat the pants off anything from Heil. And that is no slam at Heil. Sorry if I ruffled any feathers. On Thu, Jan 9, 2014 at 5:51 PM, manual...@juno.com wrote: I use a D-104 with the Flex 5000 many times cause it looks cool and works well. Pete, wa2cwa http://www.manualman.com/ On Thu, 9 Jan 2014 16:41:44 -0600 Patrick Greenlee patric...@windstream.net writes: Here is a vote for the Heil PR40. Plenty of other mikes out there and you can discuss mikes to death but I have never heard a good argument against the PR40 other than it cost more than using a crystal ear bud and gluing a plastic funnel to it and shouting into the funnel. Why drive a screw with a hammer when there is a perfectly good tool for the job. You find me something that has more capability for the buck as applied to ham radio and I might want one. Hasn't happened yet. Patrick NJ5G -Original Message- From: Scott Blixt Sent: Thursday, January 09, 2014 4:23 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Mic recommendations I have a HM-5 mic. And I also have a Flex 3000. Which cord do I need to make it work with the Flex? On Jan 8, 2014, at 12:22 PM, wa1...@gmail.com wrote: I bought my Flex 3000 used and it came with a Heil HM-5 mic. It was just OK... ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- I can explain it for you, but I can't comprehend it for you. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] internal keyer locking up
Similar problem with a 5000 and a straight key, switched to the 5000 CW program where I typed the letters and it worked. On Saturday, January 4, 2014 2:51 PM, Michael Babineau mbabin...@magma.ca wrote: Greg : I experienced a lock up on transmit near the end of an hour+ long rag chew QSO with my Flex-1500 and PowerSDR 2.7.2. I was using an external keyer, but I encountered some problems with dirty contacts on my paddles so I switched over to my bug to finish off the QSO. I was sending mid-sentence and suddenly found that I could no longer key the rig. Stopping and re-Starting Power SDR fixed it and I was then able to complete the QSO without issues. This is the first time I have encountered this. I am using a quad-core AMD A10-4600m-based laptop running WIN 8.1, with lots of horsepower. Michael VE3WMB Message: 6 Date: Sat, 04 Jan 2014 09:47:43 -0500 From: Gregory Gryckiewicz n2...@roadrunner.com To: flexradio@flex-radio.biz Subject: [Flexradio] internal keyer locking up Message-ID: 52c81f0f.9060...@roadrunner.com Content-Type: text/plain; charset=ISO-8859-1; format=flowed Has anyone had a problem with the internal keyer locking up. Using PWR SDR 2.7.2 and Flex 1500 - At times, the keyer becomes stuck in dits or dahs until the program is restarted again. USB is set to a conservative value and audio buffer is at 512 Thanks N2DYT ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] PowerSDR-DataTransfer Problem
Wise move On Tuesday, December 17, 2013 4:29 PM, Paul Playford w8...@q.com wrote: Think I will wait for all the bugs to get ironed out. Rick Kd4jrx I thought those were features :-) Paul, W8AEF ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] [COMMERCIAL] Black Friday Discounts at Abroham Neal Computers
Don't make the mistake I did. Two years ago I tried to save money and not buy one of his computers. BIG MISTAKE! On Wednesday, November 20, 2013 8:02 PM, Neal Campbell nealk...@gmail.com wrote: I worked all day in refreshing all of the configurations of my computers as well as setting up my Black Friday discounts so I decided to unveil them tonight! Save up to $150 on the only computers built from the ground up for the ultimate performance with Flex radios! You get outstanding performance, due to carefully chosen components and over 4 years experience in tuning and tweaking SDR computers. The amateur radio programs you would like are already installed and configured, truly a purchase and play. You can also purchase remote support contracts where we will manage your configuration, install new software, help you through problems. Thank you for your prior business and we look forward to another year of outrageous performance. 73 Neal Campbell Abroham Neal LLC ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex 3000 for DX'ing and SDR
The 1500 has a delay (latency) problem which makes it useless for CW. I sold mine and now have a KX3 Yesterday I got my 1500 working... But what's up with the CW?? I can't heard the other stations when I'm transmitting. Plus my fist is all screwed up... Can't send worth a shit. WTF! Can't find the side tone vol. back to the K3 and KX3 real CW machines that just work. Looks like the 1500 will wind up on eBay... I still give it some more time.. It maybe that I just don't know how to use it correctly. It seems to me it needs to be at least as good in CW as the K line. Phil K5SSR Santa Fe Wanna be SOTA Shack Sloth. A wise man once said nothing On Sep 18, 2013, at 1:49 AM, Phil Cragg p...@headstartpets.co.uk wrote: In what way is it better? Phil G3UGK -Original Message- From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mike Sent: 18 September 2013 08:34 To: flexradio@flex-radio.biz; cra...@neb.rr.com Subject: Re: [Flexradio] Flex 3000 for DX'ing and SDR Only thing to add to all the comments that have already been posted is that the KX3 is a much better CW rig, if like me CW is your mode of choice. On 17/09/13 18:00, flexradio-requ...@flex-radio.biz wrote: Message: 1 Date: Mon, 16 Sep 2013 12:22:17 -0500 From: Craig Schroeder cra...@neb.rr.com To: flexradio@flex-radio.biz Subject: [Flexradio] Flex 3000 for DX'ing and SDR Message-ID: f460946b-ff4e-48b0-acbc-e4ce3f739...@neb.rr.com Content-Type: text/plain; charset=us-ascii Hi, I have narrowed down to either a Flex 3000 or Elecraft KX3 for DX'ing and SDR with my MacBook Air. Does anyone have experience with the KX3 rig and how it stacks up against the Flex 3000? Thank you, Craig KD0TXL ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex 3000 for DX'ing and SDR
The wise man was not a ham? From: Philip Townsend Lontz phi...@mac.com To: Burt k1...@yahoo.com Cc: flexradio@flex-radio.biz flexradio@flex-radio.biz Sent: Wednesday, September 18, 2013 11:06 AM Subject: Re: [Flexradio] Flex 3000 for DX'ing and SDR I'm glad I already have a KX3. I tried to make some QSO yesterday with the 1500 but I could not. A wise man once said nothing On Sep 18, 2013, at 9:01 AM, Burt k1...@yahoo.com wrote: The 1500 has a delay (latency) problem which makes it useless for CW. I sold mine and now have a KX3 Yesterday I got my 1500 working... But what's up with the CW?? I can't heard the other stations when I'm transmitting. Plus my fist is all screwed up... Can't send worth a shit. WTF! Can't find the side tone vol. back to the K3 and KX3 real CW machines that just work. Looks like the 1500 will wind up on eBay... I still give it some more time.. It maybe that I just don't know how to use it correctly. It seems to me it needs to be at least as good in CW as the K line. Phil K5SSR Santa Fe Wanna be SOTA Shack Sloth. A wise man once said nothing On Sep 18, 2013, at 1:49 AM, Phil Cragg p...@headstartpets.co.uk wrote: In what way is it better? Phil G3UGK -Original Message- From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Mike Sent: 18 September 2013 08:34 To: flexradio@flex-radio.biz; cra...@neb.rr.com Subject: Re: [Flexradio] Flex 3000 for DX'ing and SDR Only thing to add to all the comments that have already been posted is that the KX3 is a much better CW rig, if like me CW is your mode of choice. On 17/09/13 18:00, flexradio-requ...@flex-radio.biz wrote: Message: 1 Date: Mon, 16 Sep 2013 12:22:17 -0500 From: Craig Schroeder cra...@neb.rr.com To: flexradio@flex-radio.biz Subject: [Flexradio] Flex 3000 for DX'ing and SDR Message-ID: f460946b-ff4e-48b0-acbc-e4ce3f739...@neb.rr.com Content-Type: text/plain; charset=us-ascii Hi, I have narrowed down to either a Flex 3000 or Elecraft KX3 for DX'ing and SDR with my MacBook Air. Does anyone have experience with the KX3 rig and how it stacks up against the Flex 3000? Thank you, Craig KD0TXL ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction.
I knew he probably made a mistake. The fact he had to send the correction indicates that. If I said 4+4=10 is it perfectly clear it is 8? Hi all, The add was perfectly clear to me. Where could you ever expect to buy both these items for only $500? There are no such things as bargains in this hobby and on these items. Vy 73 de Koos ZS6BFD Sent from my iPhone On 03 Sep 2013, at 4:52 AM, Burt k1...@yahoo.com wrote: No one misread your ad, your ad was clear. You were offering a Flex 1500 AND 100w amp for $500. It was not the readers fault, you made the mistake as we all can at times. Most don't blame others for their mistakes however. From: Bill K w...@sbcglobal.net To: flexradio@flex-radio.biz Sent: Monday, September 2, 2013 10:30 PM Subject: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction. Several people have misread my ad for for a 1500 Flex and Superpacker Amplifier. Each item can be bought separately for $500 or buy the pair for $1000 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction.
So since there were some people who it was not clear to, are you smarter than them? You will not agree that the For sale could have been clearer? Why was a clarification sent out? From: ric5 r...@earthlink.net To: hawley, charles j jr c-haw...@illinois.edu; flexradio@flex-radio.biz Sent: Tuesday, September 3, 2013 1:44 PM Subject: Re: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction. It was ok with me ! -- From: hawley, charles j jr c-haw...@illinois.edu Sent: Tuesday, September 03, 2013 1:32 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction. It was clear to me. 8 Sent from my iPad Chuck, KE9UW (Jack for BMW motorcycles) ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction.
No one misread your ad, your ad was clear. You were offering a Flex 1500 AND 100w amp for $500. It was not the readers fault, you made the mistake as we all can at times. Most don't blame others for their mistakes however. From: Bill K w...@sbcglobal.net To: flexradio@flex-radio.biz Sent: Monday, September 2, 2013 10:30 PM Subject: [Flexradio] Flex 1500 and 100 Watt amplifier for sale:correction. Several people have misread my ad for for a 1500 Flex and Superpacker Amplifier. Each item can be bought separately for $500 or buy the pair for $1000 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] [COMM] News from Abroham Neal!
My biggest mistake about 18 months ago was NOT buying one of Neal's computers, even so he helped me set up what I did buy and he did lead me in the right direction. Don't be cheap, buy one of Neal's computer Burt --- On Sat, 6/22/13, Neal Campbell nealk...@gmail.com wrote: Hi All, With the rollout of the new Signature line of Flex radios (the 6000 series), many Flex'ers are selling their radios to make room in the shack for the new arrival. This means that a lot of hams are buying a slightly used 1500, 3000 or 5000 for their first experience with Software-Defined Radios. Rest assured new Flex owners, you have gotten one of the greatest values in ham radio! Once you connect your radio to a power supply and your computer, you run PowerSDR, you might think What have I gotten myself into? To ease your transition from being a knobly to becoming a Flex'er, we are offering a New User Configuration and Orientation service. We will remotely connect to your computer, configure Powersdr (and any associated programs you might use) and do a walkthough of all of the features of PowerSDR. A week or two after you have used your new radio, we will do a new session to answer any questions you might have. As many new Flex'ers might not have the right computer for the shack, we have a sale for the NEXT 3 DAYS. Save from $55-105 on the only Flex-Ready computers on the market. These computers provide the best setup possible for a new Flex user and the orientation is included as part of the price. Any customer who purchases an orientation service and later decides to upgrade to a Flex Ready computer, we will apply the orientation fee towards the purchase of your new computer. If you decide you would like us to fully tweak your computer, we also will apply the cost of the Orientation towards that service. See our storefront for more details! http://www.abrohamnealsoftware.com/products.php 73 Neal Campbell Abroham Neal LLC ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Why not a best guess on ship dates?
I ordered my KX3 in March of 2012, they estimated 120 days. I got mine in 140 days and paid only when shipped. Although Flex is unmatched in customer service ONCE YOU GET IT, prediction is not quite as good. --- On Wed, 6/19/13, Mike WA8BXN hubb...@hotmail.com wrote: There are so many variables its really hard to make any kind of estimate. If they were to publish such a guess, there would be complaints from people when that time arrived and they did not have a rig in hand. I'm sure the best guess is ASAP, they want to ship as soon as possible as much as you want to get your rig! 73 - Mike WA8BXN ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Owners Manual
This is the best comment I have seen posted here in a long time. Reminds me of the joke, a woman is drowning a democrat throws a life preserver but runs off to save someone else before pulling her in but a Republican throws a life preserver but not quite far enough and makes her swim for it. This manual business is similar, before sending out a manual, off they go to build the next great product. --- On Mon, 5/27/13, Patrick Greenlee patric...@windstream.net wrote: Everyone has a personal opinion regarding manuals. That is fine except where you think your personal preference trumps my needs. I too would like a complete and up to date manual and PDF or similar is fine as I have a printer. I would accept a hypertext version even though it precludes traditional printed copies. After all if I don't have a computer to read the manual on I won't be running a Flex radio. I want a manual not a license to participate in a scavenger hunt trying to find a tidbit here or there. I'm not trying to dictate to anyone what they do with information, how they get it or how they store/access it but a complete manual with TOC, chapters, etc. is not a bad thing, traditional or hypertext. I have managed software developments and I know that the developers prefer slinging code over documenting. More functionality is nice but if the users can't employ it, then so what. Here I sit with one of the niftiest products in the world, the true cat's meow of ham radios and I have to participate in an ongoing scavenger hunt for what should be in the basic documentation. I'm happy for the individuals who have the time to devote to find out how to use this technological marvel and I do appreciate it when they share their knowledge but if a proper manual were available mere mortals could employ any features available without need to sit at the feet of the priesthood. I realize we are beating a dead horse and units of output will not be in proportion to units of input. Ask for what you will but The Team is off chasing the new shiny ball and what was the new shiny ball is now a step child. History will repeat itself. Corporate philosophy/culture, even in a young company, is a powerful influence and the most likely outcome as regards the manual for the new shiny ball is a repeat of the situation we have now. Functionality will easily win out over documentation in the contest for attention. Sales are effected much more strongly by nifty features than by the quality of the documentation. Wait a year and history will repeat itself. There will be posts bemoaning the lack of sufficient documentation to employ the whoopee capabilities of the 6K series. I would be absolutely thrilled to be proven wrong but don't suspect to receive even mild titillation. Regarding the idea that the concept of centralized and complete documentation is obsolete... BOVINE EXCREMENT!!! If you think the maintainers and operators of the nation's warfighting capability are reduced to web searches and burning incense at the shrine of self appointed gurus you are out of touch with reality. Many manuals are electronic now but still complete. You don't maintain a joint strike fighter, or even a predator drone by looking around the internet to find bits of data to put in your iPad. RANT: MODE=OFF Patrick AF5CK -Original Message- From: Bill Tynan Sent: Sunday, May 26, 2013 7:06 PM To: John Kramer ; Gedas Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] Owners Manual John: I'm sure that Goodreader and Apple must be better at storing things than Windows with Outlook Express and/or Windows Live Mail. I lost all of the many files I had stored. I don't even know what the last OSCAR number issued was, and I am in charge of issuing OSCAR numbers. 73, Bill Tynan, W3XO -- From: John Kramer jkra...@iafrica.com Sent: Sunday, May 26, 2013 4:48 PM To: Gedas w8...@mchsi.com Cc: flexradio@flex-radio.biz Subject: Re: [Flexradio] Owners Manual With the introduction of the Apple iPad tablet, I now have ALL my manuals/service manuals etc all on my tablet. There is an app called Goodreader for the iPad. Make files in Goodreader for the various manufacturers, and download your manuals off the internet and into your iPad. Generally speaking, my iPad is always with me wherever I go, so ALL my manuals including VHF/UHF HT, mobile, HF, amplifiers, ATU, noise cancelling units etc etc are all on there, and easy and quick to get to. I also have lots of other ham apps on the tablet, so it is really convenient to have everything on there and take it with me. All new manuals that arrive in the boxes, stay untouched and go into my filing cabinet, and remain in new condition - something that buyers appreciate if I sell the item one day 73 John, ZS5J On 26 May 2013, at 11:21 PM, Gedas w8...@mchsi.com wrote: George gets a Gold star IMO ! Exactly my
Re: [Flexradio] Time for a new computer for my Flex 5K
Don't be stupid like I was, I didn't buy one from Neal, big mistake --- On Sat, 5/25/13, Bob Arenella rj...@comcast.net wrote: From: Bob Arenella rj...@comcast.net Subject: [Flexradio] Time for a new computer for my Flex 5K To: flexradio@flex-radio.biz Date: Saturday, May 25, 2013, 3:59 PM Hi all, Looks like it's time for a new computer, as the old one is starting to do really weird stuff. We took a nearby lightning strike last summer that came into the house via the cable company (Comcast) coax. Smoked the modem, cable TV box and everything with an ethernet port. My ham gear is well protected and survived the strike. My wifes computer was the oldest, so she got the shiny new computer. I put an ethernet card into my machine and it worked, but I think there was other damage to the MB. I'd like to configure the machine primarily for the Flex 5K, along with daily internet use. What processor would you recommend? Intel I3, I5 I7, Xenon? How about O/SI'm inclined to go with Win7, but 32 or 64 bit? I have two displays, so I'll need a video card that has ports for dual displays. Is one gig of video memory sufficient? I'm looking for a machine that's fast and can handle the Flex and online tasks (No video editing) at the same time. I want to purchase enough computer, but not way more than I need. Your ideas and opinions are most welcome! Tnx 73 de bob, N2OAM FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FLEX-5000A End of Manufacturing Announcement
John was a tremendous asset to Flex. He defined decency Burt --- On Tue, 5/21/13, TOM BLACKWELL (nt) tom.blackw...@ntpcug.org wrote: I'm looking forward to using my 5000 for a long time into the future. It has out-performed other radios on the market that cost more. (Why spend $10,000 on one of those?) There are still expensive radios shown at ham conventions that are boat anchors compared to the 5000. John Basilotto, Ph.D, W5GI, who worked on the development, particularly the audio, took my order back in 2007. We won't forget him. Here's my photo: http://www.n5gar.com/8-3-2007-1000_0023-W5GI.jpg G ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] 5000 Accessories
I am 67 years old and I haven't used my car in a week, too much technology. I bike.I never expected my Flex to last more than 10 years because of it association with Windows. However I never thought it would be done in by lack of a case. It would seem that someone could be found to do it reasonably, but I am not the expert in these matters. A local station did not maintain its tower and it went over in a hurricane and damaged the building, however they really wanted to get a new building and with the insurance money they did. Is it a stretch to think Flex wanted to end the 5000 and found an excuse to do it? I don't blame them if they did, they are trying to make money selling to 700,000 Jack Bennys, I don't know how anyone makes money selling to hams (except maybe food vendors?). By the way I make Jack Benny look like a big spender (except when it comes to KA1VBQ) --- On Tue, 5/21/13, Bill Marvin bmar...@comcast.net wrote: Burt, I believe that the more basic a technology, the longer it will work. I have a 100 year old shovel that still works very effectively. Emerging technology tends to short lived. Do you still use the PC you purchased 15 years ago? That PC was very expensive for what you got compared to what the same money will buy today. If the relatively short life span of emerging technology is unacceptable to you, you should avoid it. Eventually FlexRadio type SDR rigs will be the norm and the price will come down accordingly. Look at things like microwave ovens, VCRs, and DVD players. The first models on the market were expensive and big clunky devices. Personally, my DX-100 resides only a few feet away from my Flex-5000A. I plan on using both for a long time to come. 73, Bill - W1LLY -Original Message- From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Burt Sent: Monday, May 20, 2013 5:43 PM To: a...@aol.com; flexradio@flex-radio.biz; K9DURRay Subject: Re: [Flexradio] 5000 Accessories In your opinion when will the 5000 be gone effectively from the scene? My DX-40 still useful after 60 years as is my Viking Ranger ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] 5000 Accessories
Both chassis are available on Ebay and I bought a S-76 replacement chassis a year ago. Both fully functioning units are in my shack 60 years after manufacter. You think ANYONE will have a functioning Flex 5000 in 15 years? If Flex supports the 5000 for 10 more years that is all I could expect, do you think they will? What does Collins have to do with this? The S-76 is Hallicrafters. --- On Sun, 5/19/13, Michael Hasenfratz mi...@tothe.net wrote: When was the last time you could buy a replacement chassis for you S-76 or DX-40? Can somebody tell me how long the S-76 was available from Collins a new rig? Michael Hasenfratz Light travels faster than sound. This is why some people appear bright until you hear them speak. On May 19, 2013, at 4:16 PM, Burt k1...@yahoo.com wrote: When I bought my Flex 5000 in 2008, I figured it would be unable to be supported by 2018. I never thought the least technological part would be its demise. I knew it would never be around as long as my DX-40 and S-76 (60 years). It would seem rather than remove the 5000 from the web site, a bit of class would have been an announcement officially of what apparently has dribbled out. --- On Sun, 5/19/13, Neal Campbell nealk...@gmail.com wrote: Come on guys, lets not dish out Fear Uncertainty and Doubt! The parts that they cannot get is the case and its nt that they cannot get them but that the manufacturer now demands a minimum quantity that is way to large for the anticipated sales or is too expensive in smaller quantities to be realistically feasible! They will continue to repair and service the 5000 just like they do the SDR1000 today. 73 Neal Campbell Abroham Neal LLC HUGE DAYTON CELEBRATION SALE!! Time to get the guaranteed setup for your SDR! Now until end-May On Sun, May 19, 2013 at 4:41 PM, Samuel Strongin kf4...@embarqmail.comwrote: Up the creek without a paddle !! Sam kf4yox -Original Message- From: Larry Otto Sent: Sunday, May 19, 2013 4:38 PM To: FlexRadio Reflector Subject: [Flexradio] 5000 Accessories OK - Now that the 5000 has met it's demise, due to the unavailability of parts - my question is, if, in the future, my 5000 needs that elusive part that is unavailable, where does that leave me? Also, will the accessories, i.e. ATU, 2nd receiver, etc, remain available for the foreseable future, or shoud we purchase them now before they also become unavailable? Not trying to be a S/A, just wondering. 73 W8LO Larry __**_ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/**flexradio%40flex-radio.biz/http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ __**_ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/**flexradio%40flex-radio.biz/http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] 5000 Accessories
In your opinion when will the 5000 be gone effectively from the scene? My DX-40 still useful after 60 years as is my Viking Ranger On Mon, 5/20/13, Ray, K9DUR k9...@rnacs.com wrote: Jim, You wrote, There are many vintage stations still on the air today. I don't see the Flex 5000a being any different. It is very different in that while you can no longer buy new hardware, Flex will continue to support (and improve) the existing 5000's with new releases of PowerSDR. You can't say that about discontinued radios from other manufacturers. 73, Ray, K9DUR http://k9dur.info ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] 5000 no more
Did they have the decision over the way we found out by announcing it days AFTER they removed it from the web site? No class, no professionalism. --- On Mon, 5/20/13, Ray, K9DUR k9...@rnacs.com wrote: Tim, Unfortunately Flex had no control over the timing of the decision. It was forced upon them by the actions of a supplier. 73, Ray, K9DUR http://k9dur.info -Original Message- From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of amfone Sent: Monday, May 20, 2013 6:57 PM To: flexradio@flex-radio.biz; flexradio-requ...@flex-radio.biz Subject: [Flexradio] 5000 no more Terrible place and timing for Flex to announce the demise of the 5000. For those who are upset by the announcement, Dayton comes every year and the bad taste will linger, rightly or wrongly, a real bad fall on your facebusiness decision. Tim WB8UHZ ___ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] 5000 Accessories
When I bought my Flex 5000 in 2008, I figured it would be unable to be supported by 2018. I never thought the least technological part would be its demise. I knew it would never be around as long as my DX-40 and S-76 (60 years). It would seem rather than remove the 5000 from the web site, a bit of class would have been an announcement officially of what apparently has dribbled out. --- On Sun, 5/19/13, Neal Campbell nealk...@gmail.com wrote: Come on guys, lets not dish out Fear Uncertainty and Doubt! The parts that they cannot get is the case and its nt that they cannot get them but that the manufacturer now demands a minimum quantity that is way to large for the anticipated sales or is too expensive in smaller quantities to be realistically feasible! They will continue to repair and service the 5000 just like they do the SDR1000 today. 73 Neal Campbell Abroham Neal LLC HUGE DAYTON CELEBRATION SALE!! Time to get the guaranteed setup for your SDR! Now until end-May On Sun, May 19, 2013 at 4:41 PM, Samuel Strongin kf4...@embarqmail.comwrote: Up the creek without a paddle !! Sam kf4yox -Original Message- From: Larry Otto Sent: Sunday, May 19, 2013 4:38 PM To: FlexRadio Reflector Subject: [Flexradio] 5000 Accessories OK - Now that the 5000 has met it's demise, due to the unavailability of parts - my question is, if, in the future, my 5000 needs that elusive part that is unavailable, where does that leave me? Also, will the accessories, i.e. ATU, 2nd receiver, etc, remain available for the foreseable future, or shoud we purchase them now before they also become unavailable? Not trying to be a S/A, just wondering. 73 W8LO Larry __**_ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/**flexradio%40flex-radio.biz/http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ __**_ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/**flexradio%40flex-radio.biz/http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] No mas pantalones?
Real men treat their wives with respect and decisions are arrived at jointly. In a good marriage the pants are shared. --- On Wed, 5/15/13, bearcreekcatt...@juno.com bearcreekcatt...@juno.com wrote: What's up with this wife approval stuff? Real hams use paypal and bill me later while they hide their purchases from their wives. No mas pantalones? Jim Broaddus de nx4e Panama City, Florida USA 850 722-9927 Woman is 60 But Looks 25 Mom publishes simple facelift trick that angered doctors... http://thirdpartyoffers.juno.com/TGL3141/519392a42ac4d12a320e5st04vuc ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Distortion on my signal. Wave File Link
He suckered us into us listening to his political comment --- On Sat, 3/2/13, Jerry Falletta w2txb.je...@gmail.com wrote: Same here... although my speaker is probably less than great. Try checking into the Flex net on Sunday on 14.329 mHz, and there may be some help from those who can listen directly over the air. On Mar 1, 2013 11:24 PM, Mike WA8BXN hubb...@hotmail.com wrote: I listened to the video a few times and did not hear any obvious distortion. 73 - Mike WA8BXN ---Original Message--- From: Dan Baker Date: 3/1/2013 10:55:17 PM To: flexradio@flex-radio.biz Subject: [Flexradio] Distortion on my signal. Wave File Link http://youtu.be/7GtX8IpzDRg This is my Flex-3000 This is an example of the distortion I can not get rid of after owning it for just under a month. I bought this from Flex. You are listening to a Electro Voice RE20 plugged directly into the mic jack on the Flex. I can plug any of my mic's into the Flex, and use their respective TX profiles. And I get the same result The first phrase is into a dummy load with 3 watts. The second phrase is into my dipole with 100 watts. The receiver is a Kenwood TS-950S. I set the audio chain up with W1AEX's excellent information from his web page. http://www.w1aex.com/psdrgain/psdrgai...http://www.w1aex com/psdrgain/psdrgain.html Your comments are appreciated. Best Regards, Dan ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Video interview with Greg K5JG on SDR technology and the new FLEX-6000
If you do not have time to see Greg talk on the 6000 for an hour watch: ARRL Boxboro Flex 2012 http://youtu.be/s0bf5wdtL1Y He sums it up in 8 minutes --- On Thu, 2/21/13, N1naz n1...@comcast.net wrote: Excellent piece of Hardware and software the 6000 series is, very impressive! A real quantum leap forward in Ham Space tech. Anyone know if they are (FlexRadio) still working on improvements to their existing line of radios and PowerSDR? or is everything being thrown at the 6000 line. -Original Message- From: Edwin Marzan Sent: Thursday, February 21, 2013 21:09 To: t...@flexradio.com ; flexRadio@flex-radio.biz Subject: Re: [Flexradio] Video interview with Greg K5JG on SDR technology and the new FLEX-6000 Nice video for sure. I remember a few years back when Gerald mentioned that they had only scratched the surface of what the FLEX 5000 could do. Have they finished scratching the surface? Date: Thu, 21 Feb 2013 07:37:14 -0500 From: t...@flex-radio.com To: flexradio@flex-radio.biz Subject: [Flexradio] Video interview with Greg K5JG on SDR technology and the new FLEX-6000 Check out the HamRadioNow video interview with FlexRadio's Greg Jurrens as he takes Jeff Gary on a trip from analog to the 6000's level of SDR. http://arvideonews.com/hrn/HRN_Episode_0061.html -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Video interview with Greg K5JG on SDR technology and the new FLEX-6000
I have no problem being heard. Who are the big three? --- On Thu, 2/21/13, Gerald Capodieci jcapodi...@gmail.com wrote: One quick thought: All Flexes hear better than they transmit, now better than ever. Unfortunately if the big three can't hear the Flex they can't respond. Maybe that's OK or Perhaps the 6000 series will need a 2 or 300 Watt transmit option or only Flexers will be able to communicated with each other. On Thu, Feb 21, 2013 at 6:09 PM, Edwin Marzan edwin_mar...@hotmail.com wrote: Nice video for sure. I remember a few years back when Gerald mentioned that they had only scratched the surface of what the FLEX 5000 could do. Have they finished scratching the surface? Date: Thu, 21 Feb 2013 07:37:14 -0500 From: t...@flex-radio.com To: flexradio@flex-radio.biz Subject: [Flexradio] Video interview with Greg K5JG on SDR technology and the new FLEX-6000 Check out the HamRadioNow video interview with FlexRadio's Greg Jurrens as he takes Jeff Gary on a trip from analog to the 6000's level of SDR. http://arvideonews.com/hrn/HRN_Episode_0061.html -Tim -- Tim Ellison, W4TME Product Management, Sales Support FlexRadio Systems^(TM) 4616 W Howard Ln, Suite 1-150 Austin, TX 78728 Phone: 512-535-4713 Ext. 223 Email: t...@flexradio.com mailto:t...@flexradio.com Web: www.flexradio.com http://www.flexradio.com logo ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Question about NB1 and NB2, not working as I expect it to
Why is it my Flex 5000 picks up the camel hump in 160 meters but my Hallicrafters S-76 does not. Same antenna. It is the wifi/modem --- On Wed, 2/20/13, Graham Haddock gra...@flexradio.com wrote: Mark: The camel hump, as you call it, is the characteristic noise signature of a switching power supply. You will be much better off eliminating that at its source than you will be getting poor Bob to write a noise reduction routine to reduce it after it has already trashed the signal you want to listen to. The usual suspects are: The wall wart running your WiFi base station. The wall wart running your cable modem. The rectangular in-line power supply running your laptop. The rectangular in-line power supply running your computer monitors. Any other wall warts or rectangular in-line power supplies running stuff in your house. There is an article in this month's QST describing how the little power supply running the LED under-cabinet lighting in the kitchen was destroying one ham's reception. Good luck, --- Graham / KE9H == On Tue, Feb 19, 2013 at 3:11 PM, Mark Lunday wd4...@triad.rr.com wrote: I don't normally use these.because of what happens. I have local conditions that are quiet (-130 dBm, But I do have a few RFI sources (still to be located) which generate a 20 kHz wide hilltop of noise up to -115 dBm. The noise looks like a camel hump on the panadapter, and is usually on the CW portion of the 15 meter band down low, and the 12 meter CW portion as well. When I turn on NB1 to curb that camel hump because I want to hear weak signals that are affected in that 20 kHz segment, the entire noise floor drops including that hump, but so do the signals to the point of being unreadable. And if there is a strong signal above -115 dBm anywhere in the band, the noise floor pulses to that signal.especially if it is CW. Which renders the NB1 effect useless. I see a similar but less pronounced behavior when using NB2.the hump drops a bit but the noise floor and signals do not drop (good, but not as good in eliminating the noise with NB1).but the entire band pulses if any CW signals above -115 dBm are present (obviously not good). Pre-amp has no impact. Resetting database has no impact. Using Flex 3000, SDR 2.5.3. I have noticed this in earlier versions of SDR, which is why I did not use the features. But it has me wondering about it.and I would like to use it. Mark Lunday, WD4ELG Greensboro, NC FM06be wd4...@arrl.net http://wd4elg.blogspot.com ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Greg Jurrens on the 6000 series
Last August I did an excellent interview with Greg Jurrens (he made it excellent, I didn't) on the 6000 series. If you missed it here it is http://www.youtube.com/watch?v=s0bf5wdtL1Y He says it will be out 4th quarter 2012, is it out yet? He is really good, I am surprised Flex does not use it because he makes the complex easy to understand. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Windows 8 and Flex
Windows eight is sure different When I installed it Windows 8 I was running the previous version of PowerSDR and CPU usage jumped to 75% So I upgraded and CPU usage dropped to about 30% BUT VSP manager comes up with errors :Object reference not set to an instance of an object at vspmgr.vspmain.printports() So I cannot use PSK etc Suggestions? Burt ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] 1500 power output
Since it did put out 5 watts on his meter when he got it it would seem reasonable that he was NOW measuring accurately 1/4 watt --- On Sat, 12/29/12, Mike WA8BXN hubb...@hotmail.com wrote: How accurate is his watt meter at 5 watts? If his meter is say 100 watts full scale with 5% accuracy, it could be off by 5 watts giving the seemingly low power output. 73 - Mike WA8BXN ---Original Message--- From: y...@aol.com Date: 12/29/2012 10:13:41 AM To: FlexRadio@flex-radio.biz Subject: [Flexradio] 1500 power output I recently sold my 1500 to another Ham, after a weeks use ,he called and said the 1500 was only putting out apx. 1/4 of a watt or less. I suggested he maybe reload power sdr, running the latest version, no change. This is into a dummy load ,so no swr holdback etc. Any one have any thoughts about the problem, my suggestion was send the 1500 back to flex. thanks dale wt4t ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] You've heard of Flexradio...
And available now --- On Sat, 12/29/12, Jim Cox jcox...@bellsouth.net wrote: And much cheaper than a 6700!!! Jim K4JAF -Original Message- From: ke...@3950.net Sent: Saturday, December 29, 2012 4:06 PM To: flexradio@flex-radio.biz Subject: [Flexradio] You've heard of Flexradio... ...and now you've heard of Radio Flex, a long-ago predecessor: http://www.ebay.com/itm/Radio-Flex-Vintage-Antique-Tube-Radio-Frequency-Transformer-250-600-Meters-/181051299811?pt=Vintage_Electronics_R2hash=item2a277f97e3 73 and happy New Year, Kevin, WB4AIO. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Upgrading effects on PowerSDR
I have Windows 8 to install, I have two users, one created by Neal for Flex use. I am currently using Windows 7 1. Can I keep both operating systems? 2. Will installing Windows 8 affect that I have two users? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Upgrading effects on PowerSDR
How do I do it? --- On Wed, 12/26/12, Robert Costa, KB6QXM kb6...@yahoo.com wrote: Why not install as a dual boot system? Easy enough to do. Choose which OS you want on start-up. 73, Robert KB6QXM Ham Radio Open Conversation Yahoo group owner/moderator - Reply message - From: Burt k1...@yahoo.com To: flexradio@flex-radio.biz Subject: [Flexradio] Upgrading effects on PowerSDR Date: Wed, Dec 26, 2012 2:41 pm I have Windows 8 to install, I have two users, one created by Neal for Flex use. I am currently using Windows 7 1. Can I keep both operating systems? 2. Will installing Windows 8 affect that I have two users? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Upgrading effects on PowerSDR
Actually the computer has strange issues but I also want to have Windows 8, and use what I have heard about --- On Wed, 12/26/12, Brian Lloyd br...@lloyd.com wrote: On Wednesday, December 26, 2012, Burt wrote: I have Windows 8 to install, I have two users, one created by Neal for Flex use. I am currently using Windows 7 1. Can I keep both operating systems? 2. Will installing Windows 8 affect that I have two users? If you have Win7 running why do you want to install Win8? Is something not running right? -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 br...@lloyd.com +1.767.617.1365 (Dominica) +1.916.877.5067 (USA) ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Twas the night after Christmas
Isn't this the promised 4th quarter? --- On Tue, 12/25/12, k4...@fastmail.fm k4...@fastmail.fm wrote: From: k4...@fastmail.fm k4...@fastmail.fm Subject: Re: [Flexradio] Twas the night after Christmas To: flexradio@flex-radio.biz Date: Tuesday, December 25, 2012, 6:56 PM Thanks for the humor. I just wish. 73 Wayne On Tue, Dec 25, 2012, at 05:22 PM, Robert Costa wrote: Twas the night after Christmas, when all through the house Not a creature was stirring, not even a click of a mouse. The radios were turned off even though the XYL wouldn’t even care, In hopes that UPS soon would be there. The ham of the house was snuggled in my bed, While visions of a Flex 6700 danced in my head. And XYL in her ‘kerchief, and I in my cap, Had just settled our brains for a long winter’s nap. When out on the lawn there arose such a clatter, I sprang from the bed to see what was the matter. Away to the window I flew like a flash, Tore open the shutters and threw up the sash. The moon on the breast of the new-fallen snow Gave the lustre of mid-day to objects below. When, what to my wondering eyes should appear, But a big brown truck, pulling into the rear . With a little old driver, so lively and quick, I knew in a moment it must be my local driver, Rick. He walked very slowly carrying a large package up my walk Could it be my Flex 6700, I couldn’t even talk To the top of the porch! to the top of the wall! Now dash away! Dash away! Dash away all! As dry leaves that before the wild hurricane fly, I pushed everyone away just to get by. I ran to door, and pulled it open. To see a box that said from Flex Radio, I was hopein. As I drew in my head, and was turning around, Rick put the box down with such a bound. He was dressed all in brown, from his head to his feet, And he handed me the tablet to sign when we got to meet. A bundle of toys he had flung on his back, And he looked like a peddler, just opening his pack. His eyes-how they twinkled! his smile made me coy! He handing me the package, knowing it will give me such joy! I saw the lettering on the package and it said Flex, I told myself not to rip it open, as this was better than sex. He spoke not a word, but went straight to his work, Handing me the tablet to sign and not being a jerk. I ripped open the box, I just couldn’t stop. Jumping up and down so excited and stopped with a hop. The Flex 6700 in all of it’s glory lay on my table. As I caught myself caressing the Flex Radio Systems label. And pushing all my equipment aside to make room for the box, Hooking it up as fast as a fox! I sprang to my mic and gave a call, My excitement you could hear down the hall. But as my XYL walked down the hall and was out of sight, I keyed my new 6700 with a such a giddy voice Happy Christmas to all, and to all a good-night! ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Twas the night after Christmas
I guess the situation has changed? Saw this on the web site FLEX-6000 Signature Series SDRs which are ordered now from our On-Line Store are slated for delivery in the 2nd quarter of 2013. --- On Tue, 12/25/12, Tony Estep estept...@gmail.com wrote: From: Tony Estep estept...@gmail.com Subject: Re: [Flexradio] Twas the night after Christmas To: flexradio@flex-radio.biz Date: Tuesday, December 25, 2012, 9:59 PM On Tue, Dec 25, 2012 at 8:25 PM, Burt k1...@yahoo.com wrote: Isn't this the promised 4th quarter? = Still 3 business days left, Burt. Be patient. Tony KT0NY -- http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Well, rats!
I bought a KX3 by putting my order in on March 29, but they did not charge my card until August when they shipped. A deposit should be to require the customer to affirm a purchase that would harm the company if not executed, not to put more money in a companies coffers for a product that is in high demand. The KX3 is far better than the Flex 1500. However I am pleased with my Flex 5000 --- On Mon, 10/8/12, Tim Samaras tsama...@ecentral.com wrote: Bill, Jim: I'm in line for the second batch-I 'chickened out' on the first batch. There were lots of naysayers regarding the down payment, but this practice is common amongst other established companies. This is a link to a brand new robotic telescope mount that a company is about to release: http://www.bisque.com/sc/pages/ParamountMEII.aspx Note that the deposit is non-refundable.. Like Flex, Bisque is very well regarded in the robotic telescope mount field.. Tim WJ0G On 10/6/12 7:35 AM, Robert McGwier wrote: What is usually on display is an open box of a functional radio inside plexiglass and that done only to keep curious hands off the parts. If you didn't see that at Belton, I bet it was busy elsewhere. Bob On Oct 6, 2012 5:33 AM, Tim Samaras tsama...@ecentral.com mailto:tsama...@ecentral.com wrote: All: At the Belton hamfest in TX hoping to see the 6700 in action(and sell some of the hoard of test equipment and other stuff I have) at the Flex booth.only to find an empty box with pretty lights on.. Would have loved to see it work..even if the GUI isn't quite done.. Rats! Tim Samaras WJ0G Sent from my iPhone On Oct 5, 2012, at 5:47 PM, Jim KJ3P Perry j...@kj3p.us mailto:j...@kj3p.us wrote: If your TX bandwidth filter is set for 200 to 2900, I don't see how EQ settings much outside that range will do anything. So, I set 32, 63, 8K, 16K all to -12dB. The 125 and 4K settings, while outside of your TX bandwidth, may still have a mild effect (if any) because of the skirts of the EQ response for those ranges (I'm not sure how the DSP EQ algorithms mirror analog behavior). Of course, if I'm wrong, I'm sure this knowledgeable group will straighten me out! I use the Heil headset, and have had good results as follows for general (non-DX) QSOs: 125 -3, 250 -2, 500 0, 1K +2, 2K +5, 4K +6 Remember that each little tick on the EQ chart represents 3 dB. The above settings give a fine crisp response with the Heil, while leaving some of the pleasant lower end. Disclaimer: this reflects my preference to avoid the big bassy sound on SSB. You may feel differently. For DX punch, you might try this as a starting point: 125 -12, 250 -6, 500 -3, 1K +3, 2K +6, 4K +9 The idea is to concentrate your TX energy in the part of the vocal range that provides the most intelligibility, and ditch much of the low end that robs power and does nothing for clarity. It occurs to me that if the TX bandwidth filter is not first in the DSP audio chain, then excessive low/high audio frequencies might make things get really strange when they hit the compander/compressor algorithms. In other words, the raw mic audio should go through the TX filter first, then the other processing later. I'd love to have someone confirm these DSP circuit arrangements. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz mailto:FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz mailto:FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
[Flexradio] Great price on Flex 5000
Saw this on Ebay, is it reasonable http://www.ebay.com/itm/Flex-5KA-radio/110949815206?ssPageName=WDVWrd=1ih=001category=40065cmd=ViewItem ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] A look at the 6000 with Greg
Having worked in the media no one speaks better than Greg, K5GJ http://youtu.be/s0bf5wdtL1Y ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Lots of lightly used Flex Radios for sale.
The Collins line works sixty years later, what about the Flex 5000? Technology has it plusses and minuses --- On Wed, 8/22/12, Patrick Greenlee patric...@windstream.net wrote: From. Collins S-Line gear still works well and does what it always did. The 5000 may turn out to be the SDR equivalent. 73 Patrick AF5CK ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FOR SALE: FLEX-5000A (with RX2, ATU FlexControl Knob) and Desktop PC
I agree, I have the 5000, will not sell it. Did sell the 1500 and replaced it with the KX3, huge improvement over the 1500 Burt --- On Tue, 8/21/12, paim paimg0...@btinternet.com wrote: Why so many sale the flxex 3000 5000 ? what is going on i love it and i will never sale it ,it cost me so much money since i have two of them i just wonder why this going on ? vy 73 E.P g0uut From: Anthony Hackenberg anthony.w.hackenb...@gmail.com To: flexradio@flex-radio.biz Sent: Tuesday, 21 August 2012, 18:24 Subject: [Flexradio] FOR SALE: FLEX-5000A (with RX2, ATU FlexControl Knob) and Desktop PC FLEX RADIO FOR SALE: FLEX 5000A for $2850 plus shipping. I purchased this radio (Serial# 1311-3180) bundled with the factory-installed RX2 (second receiver) and ATU (auto tuning unit) from FlexRadio Systems on May 22, 2011. It is in mint condition and is still covered by the remainder of the manufacturer’s warranty (expires May 2013). I am also including the FlexControl Knob (purchased 12/17/12). DESKTOP PC FOR SALE: Also selling the companion, desktop personal computer (PC) for $950 plus shipping. It measures 19.69”H x 8.27”W x 15.16”L. Some of its specifications are: LIAN aluminum tower case, Intel Core i5 processor, Radeon HD 6770 video card, 4GB memory, 320GB hard drive, DVD burner, Microsoft Windows 7 Home Premium (32 bit), and Firewire card with multiple ports (totally compatible with Flex 5000A). It too is in mint condition. On January 5, 2012, I purchased this PC from Abroham Neal ( www.abrohamnealsoftware.com). Neal Campbell (K3NC) custom built it and optimized it for the Flex 5000A. It is also still covered by the remainder of the vendor’s warranty (expires January 2015). Note: Monitor, keyboard mouse are NOT included. SPECIAL PACKAGE DEAL: If you want both the Flex 5000A and the PC, you can have them for the special package price of $3600 plus shipping. Method of Payment and Shipping: PayPal is preferred but I can also accept your money order or bank cashiers check. I can ship via United Parcel Service (UPS) to anywhere in CONUS (the continental United States), or you can arrange with me for a pick-up within 50 miles of my QTH (Wadsworth, OH 44281). Non-smoking shack. Photos of FLEX-5000A and desktop PC are available upon your request. I will not accept any trade-in offers as I am downsizing my inventory. 73, Tony Hackenberg N8SK (formerly WA8SSQ) Email: anthony.w.hackenb...@gmail.com Phone: (330) 334-4900 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FOR SALE: FLEX-5000A (with RX2, ATU FlexControl Knob) and Desktop PC
I have no idea what you are talking about. What I do get that I did not get with the 1500 was a big easy to read display, I do not need a separate power supply, I can work CW with the 1500 the delay really messed up sending, I do not need a computer or earphones, I get QSK and apparently I can hook it up to a computer. It also copies PSk, RTTY and CW right on the screen. I do like the 5000 and Flex is an amazing company. Burt --- On Tue, 8/21/12, Tony Estep estept...@gmail.com wrote: On Tue, Aug 21, 2012 at 2:44 PM, Burt k1...@yahoo.com wrote: sell the 1500 and replaced it with the KX3... = Burt, are you using PSDR-IF or NaP3 with your KX3 to get the same display, controls etc. that you get with a Flex radio? Tony KT0NY -- http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Error in last message
My 1500 was NOT useful on CW due to the monitor delay Also the KX3 runs 12 watts, not 5 which I find makes a difference With older PowerSDR software it was useful on CW and my reaction when I got it, how can they do all this in such a small package? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FOR SALE: FLEX-5000A (with RX2, ATU FlexControl Knob) and Desktop PC
Are there any step by step instructions? I can be a little thick. Burt --- On Tue, 8/21/12, Tony Estep estept...@gmail.com wrote: On Tue, Aug 21, 2012 at 7:14 PM, Burt k1...@yahoo.com wrote: I have no idea what you are talking about. --- Ah, okay, no prob. Since the KX3 has I-Q out, you can get the familiar PSDR panadapter and SDR controls etc by feeding the I-Q into the appropriate version of PSDR, available for example at http://www.telepostinc.com/NaP3.html You may need just a cable, or you may need an outboard sound card, depending on the capabilities of your onboard sound module. Just a thought, Tony KT0NY -- http://www.isb.edu/faculty/facultydir.aspx?ddlFaculty=352 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] WSPR
Can I get WSPR to work with my Flex 5000? Burt ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] LOW POWER OUTPUT ON 2M
Support your statement, appalling history of this company --- On Sun, 8/12/12, David Painter david.pain...@ntlworld.com wrote: Given the appalling history of this company I will wait for a denial from someone who is actually employed by them and can speak with some authority/accountability. David - Original Message - From: Brian Lloyd To: David Painter Cc: Sent: Sunday, August 12, 2012 5:18 PM Subject: Re: [Flexradio] LOW POWER OUTPUT ON 2M On Sun, Aug 12, 2012 at 8:38 AM, David Painter david.pain...@ntlworld.com wrote: In a message dated today Steve K1IIG stated: ' I have requested Flex to rewrite the code to allow users to access that via a UCB function. I do not expect this will happen with the 5000 now discontinued along with the v/u add on. ' When and where did FRS announce that the 5000 was/is discontinued? The 5000a is not discontinued. If you aren't sure, go to the Flex website store and you will see that you can still buy a Flex 5000a. It is right there on the front of the web site with a Buy Now button still prominently displayed. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 br...@lloyd.com +1.767.617.1365 (Dominica) +1.916.877.5067 (USA) No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2197 / Virus Database: 2437/5194 - Release Date: 08/11/12 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] LOW POWER OUTPUT ON 2M
The facts to support your statements are? --- On Sun, 8/12/12, David Painter david.pain...@ntlworld.com wrote: Wait until you hear the wailing and gnashing of teeth when, five years down the road, the 6000 series is still so full of bugs a mosquito net would be jealous and you are still waiting for enhancements that have been promised for years. David - Original Message - From: Lee Mushel herbe...@centurytel.net To: Brian Lloyd brian-wb6...@lloyd.com; David Painter david.pain...@ntlworld.com Cc: flexradio@flex-radio.biz Sent: Sunday, August 12, 2012 7:23 PM Subject: Re: [Flexradio] LOW POWER OUTPUT ON 2M Yes, there are things that don't work and funny stuff happens sometimes but I really like that radio and the bumpy stuff on the back and it rarely surprises me anymore. With a few mouse clicks and, yes, maybe even a reboot it does what I've come to expect and I definitely consider it to be an aspect of my radio hobby that keeps me interested. The failures and shortcomings are most likely the result of the incredible complexity and unpredictable interactions in software and hardware that are unlikely to be ever totally fixed. Wait until you hear the weeping and wailing and howls of dissatisfaction when the first 6000's appear! 73 Lee K9WRU - Original Message - From: Brian Lloyd brian-wb6...@lloyd.com To: David Painter david.pain...@ntlworld.com Cc: flexradio@flex-radio.biz Sent: Sunday, August 12, 2012 10:48 AM Subject: Re: [Flexradio] LOW POWER OUTPUT ON 2M On Sun, Aug 12, 2012 at 9:25 AM, David Painter david.pain...@ntlworld.comwrote: ** That doesn't mean it isn't discontinued. But think about it, why should they? They have no product to replace the 5000a. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 br...@lloyd.com +1.767.617.1365 (Dominica) +1.916.877.5067 (USA) - No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2197 / Virus Database: 2437/5195 - Release Date: 08/12/12 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] LOW POWER OUTPUT ON 2M
Yet to provide a single fact --- On Sun, 8/12/12, David Painter david.pain...@ntlworld.com wrote: From: David Painter david.pain...@ntlworld.com Subject: Re: [Flexradio] LOW POWER OUTPUT ON 2M To: Brian Lloyd brian-wb6...@lloyd.com Cc: flexradio@flex-radio.biz Date: Sunday, August 12, 2012, 7:47 PM Good for you Brian, Fortunately, organisations like the Federal Trade Commission and Texas Attorney Generals office exist protect the interests of consumers who don't have the benefit of your inside knowledge. Flex doesn't need me or anyone else for that matter to hurt them. My in box is testament to the vast swathes of customers who Flex has alienated (shafted is a common term) by the promises made year after year and their faillure to deliver on their promises year after year. Trust and confidence are vital to the success of any business...for many people Flex have blown that away. David - Original Message - From: Brian Lloyd To: David Painter Cc: Burt ; flexradio@flex-radio.biz Sent: Sunday, August 12, 2012 8:41 PM Subject: Re: [Flexradio] LOW POWER OUTPUT ON 2M On Sun, Aug 12, 2012 at 12:11 PM, David Painter david.pain...@ntlworld.com wrote: Gerald Youngblood (10/6/2008) The new architecture is currently in development as we speak but will take several more months before it is ready for beta testing. In fact, I have just completed two days of meetings this week with the developers working on the specific implementation plans. This is a major effort because it is a ground up rewrite of the entire system. I ask everyone to be patient while the developers do their magic. Gerald Youngblood (3/7/2008) On the PowerSDR software front, we will be limiting updates to bug fixes and essential enhancements in order to devote our resources to the new software architecture. We plan to strictly limit feature additions to PowerSDR so that we can turn our attention to the new development, which will enhance our ability to rapidly bring new capabilities to our customers. It is imperative that we make this break with the past so that all our customers can receive the benefit of the new architecture. We will keep you up to date as things develop on this front. If YOU search the archives I know you will find many more. Good for you David. So you are unhappy with Flex's past performance. I guess the major question is, What is your point? What is it that you hope to accomplish? Are you hoping to punish Gerald? Are you hoping to hurt Flex somehow? Are you hoping to help the rest of us who are too stupid to realize how malevolent/stupid Flex is? We are all big boys (and girls) here. Many of us have owned Flex products. We are walking into this with our eyes open. I know that I don't really need your help in this area. I am well aware of what has been promised and what has been delivered. I even have a pretty good idea what was and is wrong. I understand why Flex never delivered on its rewrite of PowerSDR and I also understand why Flex has stuck with PowerSDR even given its limitations. I also understand how the new architecture of the 6x00 series is different and how that is going to change how they develop software for it and why that is likely to produce a product that is far more flexible and extensible than their previous products were/are. I guess what I am saying here in a nutshell is, Thank you for your concern but I don't really need your help. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 br...@lloyd.com +1.767.617.1365 (Dominica) +1.916.877.5067 (USA) No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2197 / Virus Database: 2437/5195 - Release Date: 08/12/12 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] VU5K End of Production Notice
When you are dealing with today's state of the art technology this should be of no surprise. When I bought my Flex 5000 I expect no more than 10 years service. Flex is not your fathers or grandfathers's Hallicrafters, Hallicrafters etc last but on the other hand Hallicrafters radios cannot match up aspects like a panadapter in the Flex. We don't expect more than 5 years out of our computers and Flex is half computer. The demise of the VU5K is a warning of what you are dealing with. It is not Flex so much as this is the world we live in. That said, I still prefer my Flex for how ever long it can be maintained. Burt ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] VU5K End of Production Notice
--- On Sat, 6/2/12, Neal Campbell nealk...@me.com wrote: Why are we so paranoid that one day the 5000 will become a boat anchor (but we definitely need a new term for this kind of radio!)? Why did we call them boat anchors when they drifted so well? ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex VS. Elecraft
I put in an order for the KX3 after selling the Flex 1500, so we will see. The 1500 was super until you tried to send CW with a straight key My 5000 I will keep I agree the 6000 series is something to behold --- On Sun, 5/27/12, Justin M. Mayrand jmayr...@metrocast.net wrote: Anyone own an Elecraft K3 and a Flex 3K or 5K? I am curious to know how they stack up against each other in a QTH environment (versus in a lab). Thanks! Justin KB1TFH ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Getting started 1500 any tips ?
That is why I sold my 1500 . w8vnzw8...@gmail.com said: - Other than the keyer issue I am really enjoying my new rig. 73..Mark/W8VNZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] 6700 how it is all work out ?
It is said we ought not discuss the 6000 series here but I have no plans at getting one but I find seeing the discussion here useful, anyone agree? Brevity is the soul of wit-Shakespeare If you are too big for a small job, you are too small for a big job. --- On Thu, 5/24/12, paim paimg0...@btinternet.com wrote: From: paim paimg0...@btinternet.com Subject: [Flexradio] 6700 how it is all work out ? To: Reflector flexradio@flex-radio.biz Date: Thursday, May 24, 2012, 2:25 AM hello is any one can please explain on the new flex 6700 how this will work out do I still need to hook it to my computer ? dose it matter what op sys I use what about dpc ? it may not count now since I think it run on it is own sys . is the 6700 connect to the pc with USB 1 OR 2 since there is no user manual it will nice to have more info when the user manual will be ready ? vy 73 E.P g0uut ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Game changing
If you asked him 3x and got the same response I would not be happy either BUT if he proved his mistake AND gave me some consideration on the price I would accept his mistake. I would not expect him to give a $500 break, maybe $100. I do live but the creed, if you make a mistake I don't pay for it. Many companies and people think you ought to pay for their mistake. I think Flex would be reasonable. I assume before posting your comment you asked for SOME consideration? Burt --- On Wed, 5/23/12, bearcreekcatt...@juno.com Let's see it this post makes it, or winds up on the cutting room floor. My dealings with Flex Radio's Tim Ellison have come to a screaming halt! He quoted me a firm price for a new 5000A with ATU and second receiver option, $2998. I asked Tim Ellison 3 times to check his numbers and he led me to believe that this price was firm. Well, yesterday, I received an email from him saying that he had made a mistake and the transceiver package price was $3499! He said that he made an honest mistake! Where I come from, if a supplier or individual quotes a price and the buyer accepts it, that's a contract. The arrogance of Flex has turned me off for their gear. This is a real disappointment, as I just sold/traded my IC756 Pro III and my Yaesu FT-897D package to amass funds to finance the new Flex. Bottom linebe careful with companies who zoom up to the top, as sometimes they move too fast causing customer service to suffer. If I should buy another Flex, it would be a used one from an individual, not from Flex Radio. I have waisted much time and I am very frustrated. Jim Broaddus de nx4e Fast, Secure, NetZero 4G Mobile Broadband. Try it. http://www.netzero.net/?refcd=NZINTISP0512T4GOUT2 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] flex6700 inside pic ??
When PowerSDR 2.x came out there was a year delay with the comment it will be ready when it's ready. Will the 6700 series come out in 4q 2012 or is a delay up to a year possible? Burt Brevity is the soul of wit-Shakespeare If you are too big for a small job, you are too small for a big job. --- On Sun, 5/20/12, Tim Ellison t.m.ellison...@gmail.com wrote: We have not published a picture of the insides of the FLEX-6000s. Although I suspect someone from Dayton that took pictures of it will. Tim Ellison On 5/20/2012 3:23 AM, paim wrote: is any one have pic of the inside of the 6700 ??? vy 73 E.P g0uut /dl9fcc ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Will there be a yearly charge for future PSDR releases for non-6000 owners?
Buying a ham radio is rarely an INVESTMENT. Saying that is an excuse to buy a want not a need. if I buy a 3D TV is that an INVestment? Investment defined: something in which money is invested: something, e.g. a company, endeavor, or property, that money is invested in with the goal of making a profit. Now if you buy a vintage rig, clean it up, restore it, maybe. --- On Fri, 5/18/12, Stephen Hicks, N5AC st...@flexradio.com wrote: This is probably going to sound counter-intuitive on the surface, but I would like to communicate this message: You WANT us to charge for software updates. Why? When you purchase a radio, it is an investment. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Webcam at Hamvention 2012?
Under glass? So it a concept, not actually working? --- On Sat, 5/19/12, Mike Schwendeman m...@s3com.net wrote: From: Mike Schwendeman m...@s3com.net Subject: Re: [Flexradio] Webcam at Hamvention 2012? To: flexradio@flex-radio.biz Date: Saturday, May 19, 2012, 2:02 PM The LiveStream video URL is here: http://www.livestream.com/flexradiosystems Do note the 6000 under glass in the lower-center! (Mega-COOL!) -Mike- KØJTA On 5/19/12 12:00 PM, flexradio-requ...@flex-radio.biz wrote: Date: Fri, 18 May 2012 16:12:48 -0500 From: Mike Schwendemanm...@s3com.net To:FlexRadio@flex-radio.biz Subject: [Flexradio] Webcam at Hamvention 2012? Last year, the good folks at Flex Radio had a webcam in operation. Is there a webcam at the Flex booth area this year? (What's the URL?) Thanks, and 73! -Mike- K?JTA ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Webcam at Hamvention 2012?
I wish I had gone there to Dayton Is Flex coming to Boxboro ARRL convention in August I got started with Flex there 4 years ago --- On Sat, 5/19/12, John Kramer jkra...@iafrica.com wrote: Burt... From what I saw, there were four working units hooked up and on display. The one in the glass box is just an undressed unit to show the inner workings On 19 May 2012, at 8:23 PM, Burt wrote: Under glass? So it a concept, not actually working? --- On Sat, 5/19/12, Mike Schwendeman m...@s3com.net wrote: From: Mike Schwendeman m...@s3com.net Subject: Re: [Flexradio] Webcam at Hamvention 2012? To: flexradio@flex-radio.biz Date: Saturday, May 19, 2012, 2:02 PM The LiveStream video URL is here: http://www.livestream.com/flexradiosystems Do note the 6000 under glass in the lower-center! (Mega-COOL!) -Mike- KØJTA On 5/19/12 12:00 PM, flexradio-requ...@flex-radio.biz wrote: Date: Fri, 18 May 2012 16:12:48 -0500 From: Mike Schwendemanm...@s3com.net To:FlexRadio@flex-radio.biz Subject: [Flexradio] Webcam at Hamvention 2012? Last year, the good folks at Flex Radio had a webcam in operation. Is there a webcam at the Flex booth area this year? (What's the URL?) Thanks, and 73! -Mike- K?JTA ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex-6700
I am concerned why they want a large deposit up to 6 months BEFORE shipment. Is my concern reasonable? Burt --- On Fri, 5/18/12, Bob McGwier n...@flexradio.com wrote: Add up top two transceivers of ALL other ham transceiver manufacturers. It does not equal the raw processing power in the 6500 and the 6700 is... well wow. Bob On Fri, May 18, 2012 at 12:17 AM, Bill Dailey docdai...@gmail.com wrote: Wow. I was surprised by the built in processing. Also the options (gps). I presume it can take an external 10MHz? Price and availability will be interesting. Doc KX0O Sent from my iPhone ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Working prototype at Dayton?
Would have been going to Dayton for At least the hype was not really hype A bit pricey, I can afford it. I would love to hear more Burt --- On Fri, 5/18/12, Tim Ellison t.m.ellison...@gmail.com wrote: Yes, there are working prototypes of the FLEX-6000s at Dayton. Tim Ellison On 5/18/2012 9:49 AM, Alan NV8A wrote: I won't be at Dayton this year, but is there a working prototype of the 6700 on display there? When will we be able to see videos of a working 6700? Alan NV8A ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FlexRadios For Sale
The 6700 is far too high priced to compete with the 5000 There should be little effect on resale price of 5000 I was concerned about that but the deposit is about the price of the 5000 Burt --- On Fri, 5/18/12, Andre VanWyk NJ0F kr...@yahoo.com wrote: Good luck. I noticed after after the announcement the swap sites suddenly has more Flex 5000's for sale than I have seen for a while. I am sitting with a 4 month old F5K and not really a happy camper right now... 73 NJ0F Sent from my iPhone On May 18, 2012, at 12:14 PM, Travis Best w3t...@gmail.com wrote: I am putting 2 of my Flex Radios for Sale to fund my purchase of the New Flex Flex 5000A With ATU and RX-2 $2900.00 Flex 3000 Part of my Breakout Kit and only used during 1 Field Day $1000.00 Prices Don't Include Shipping ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Game Changer Ahead!
A tease for a week is an afront to customers as you point out. If the goal is to irritate customers, the goal has been achieved Burt --- On Sun, 5/13/12, Patrick Greenlee patric...@windstream.net wrote: From: Patrick Greenlee patric...@windstream.net Subject: Re: [Flexradio] Game Changer Ahead! To: flexradio@flex-radio.biz Date: Sunday, May 13, 2012, 7:59 AM Game changer? Makes me a bit apprehensive seeing as how I just got my 5000 and haven't powered it up yet. I would not be a happy camper to have bought one of the very last of the OLD ones instead of one of the first of the new ones. Patrick AF5CK -Original Message- From: Burt Sent: Saturday, May 12, 2012 7:45 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Game Changer Ahead! By posting this they have effectively stopped all orders of anything else until the big mystery is revealed Is Neal Campbell around? Burt --- On Sat, 5/12/12, k4...@fastmail.fm k4...@fastmail.fm wrote: From: k4...@fastmail.fm k4...@fastmail.fm Subject: Re: [Flexradio] Game Changer Ahead! To: Flex flexradio@flex-radio.biz Date: Saturday, May 12, 2012, 8:39 PM Hard to imagine what would be better than my Flex 5000. 73 Wayne K4ELO On Sat, May 12, 2012, at 12:27 PM, Mike Schwendeman wrote: I have just ONE QUESTION about the GAME CHANGER: - Where can I place my order!? (Thank you; -I KNOW it will be good. I have FAITH!) 73; -Mike- KØJTA On 5/12/12 12:00 PM, flexradio-requ...@flex-radio.biz wrote: Date: Fri, 11 May 2012 19:00:45 -0500 From: Greg Jurrensg...@flexradio.com GAME CHANGER AHEAD! For those of you attending Dayton Hamvention this year, we invite you to visit our booth (312-314 323-325) for the latest in FlexRadio Systems products. Also, don't forget to register for the FlexRadio Systems Banquet to be held Saturday, May 19th as we still have a few tickets available. Additional details on the banquet are available on our website at www.flexradio.com . For those of you not attending Hamvention this year, we encourage you to watch our website daily to learn more about THE GAME CHANGER. (Be sure to hit REFRESH on your browser.) Full details will be unveiled Friday, May 18, 2012 at Hamvention and on the web atwww.flexradio.com. As always, we appreciate your business. Best 73, Greg Jurrens ? K5GJ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Game Changer Ahead!
Flex isn't Kenwood. I expect more from Flex --- On Sun, 5/13/12, Louis Bancook k5uu...@gmail.com wrote: This is no different than Kenwood, Icom, or Yaesu rolling out a new product...wait a minute...isn't Kenwood doing the same thing at Dayton too? Keep in mind, the SDR is an ever changing platform, which is good. I am really happy with my Flex-1500 and I would like to get a 5000a someday. The GAME CHANGER is what it is... Louis K5UUT n 5/13/2012 10:00 AM, Robert Costa, KB6QXM wrote: If they do put out a new piece of hardware that becomes their new flagship, you might well see MANY 5000a being sold on the cheap to get the new flagship. Just my opinion. We only have a short time to wait. We all will know soon enough. GO FLEX! 73, Robert KB6QXM Ham Radio Open Conversation Yahoo group owner/moderator - Reply message - From: Burtk1...@yahoo.com To:flexradio@flex-radio.biz Subject: [Flexradio] Game Changer Ahead! Date: Sun, May 13, 2012 7:50 am A tease for a week is an afront to customers as you point out. If the goal is to irritate customers, the goal has been achieved Burt --- On Sun, 5/13/12, Patrick Greenleepatric...@windstream.net wrote: From: Patrick Greenleepatric...@windstream.net Subject: Re: [Flexradio] Game Changer Ahead! To: flexradio@flex-radio.biz Date: Sunday, May 13, 2012, 7:59 AM Game changer? Makes me a bit apprehensive seeing as how I just got my 5000 and haven't powered it up yet. I would not be a happy camper to have bought one of the very last of the OLD ones instead of one of the first of the new ones. Patrick AF5CK -Original Message- From: Burt Sent: Saturday, May 12, 2012 7:45 PM To: flexradio@flex-radio.biz Subject: Re: [Flexradio] Game Changer Ahead! By posting this they have effectively stopped all orders of anything else until the big mystery is revealed Is Neal Campbell around? Burt --- On Sat, 5/12/12, k4...@fastmail.fm k4...@fastmail.fm wrote: From: k4...@fastmail.fm k4...@fastmail.fm Subject: Re: [Flexradio] Game Changer Ahead! To: Flexflexradio@flex-radio.biz Date: Saturday, May 12, 2012, 8:39 PM Hard to imagine what would be better than my Flex 5000. 73 Wayne K4ELO On Sat, May 12, 2012, at 12:27 PM, Mike Schwendeman wrote: I have just ONE QUESTION about the GAME CHANGER: - Where can I place my order!? (Thank you; -I KNOW it will be good. I have FAITH!) 73; -Mike- KØJTA On 5/12/12 12:00 PM, flexradio-requ...@flex-radio.biz wrote: Date: Fri, 11 May 2012 19:00:45 -0500 From: Greg Jurrensg...@flexradio.com GAME CHANGER AHEAD! For those of you attending Dayton Hamvention this year, we invite you to visit our booth (312-314 323-325) for the latest in FlexRadio Systems products. Also, don't forget to register for the FlexRadio Systems Banquet to be held Saturday, May 19th as we still have a few tickets available. Additional details on the banquet are available on our website at www.flexradio.com . For those of you not attending Hamvention this year, we encourage you to watch our website daily to learn more about THE GAME CHANGER. (Be sure to hit REFRESH on your browser.) Full details will be unveiled Friday, May 18, 2012 at Hamvention and on the web atwww.flexradio.com. As always, we appreciate your business. Best 73, Greg Jurrens ? K5GJ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http
Re: [Flexradio] Game Changer Ahead!
By posting this they have effectively stopped all orders of anything else until the big mystery is revealed Is Neal Campbell around? Burt --- On Sat, 5/12/12, k4...@fastmail.fm k4...@fastmail.fm wrote: From: k4...@fastmail.fm k4...@fastmail.fm Subject: Re: [Flexradio] Game Changer Ahead! To: Flex flexradio@flex-radio.biz Date: Saturday, May 12, 2012, 8:39 PM Hard to imagine what would be better than my Flex 5000. 73 Wayne K4ELO On Sat, May 12, 2012, at 12:27 PM, Mike Schwendeman wrote: I have just ONE QUESTION about the GAME CHANGER: - Where can I place my order!? (Thank you; -I KNOW it will be good. I have FAITH!) 73; -Mike- KØJTA On 5/12/12 12:00 PM, flexradio-requ...@flex-radio.biz wrote: Date: Fri, 11 May 2012 19:00:45 -0500 From: Greg Jurrensg...@flexradio.com GAME CHANGER AHEAD! For those of you attending Dayton Hamvention this year, we invite you to visit our booth (312-314 323-325) for the latest in FlexRadio Systems products. Also, don't forget to register for the FlexRadio Systems Banquet to be held Saturday, May 19th as we still have a few tickets available. Additional details on the banquet are available on our website at www.flexradio.com . For those of you not attending Hamvention this year, we encourage you to watch our website daily to learn more about THE GAME CHANGER. (Be sure to hit REFRESH on your browser.) Full details will be unveiled Friday, May 18, 2012 at Hamvention and on the web atwww.flexradio.com. As always, we appreciate your business. Best 73, Greg Jurrens ? K5GJ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] FW: Flex 3000 Question from a Newbie
You are not missing anything. If I put 100 watts into my IC2KL it would prompty go into protect mode, if I were lucky. Flex can say if they cannot do something, you don't need it Physical ALC connections I have seen on all concrete (knob) radios. It should be on the Flex 5000 at least Burt Brevity is the soul of wit-Shakespeare If you are too big for a small job, you are too small for a big job. --- On Mon, 4/9/12, Peter G. Viscarola pete...@osr.com wrote: From: Peter G. Viscarola pete...@osr.com Subject: Re: [Flexradio] FW: Flex 3000 Question from a Newbie To: FlexRadio@flex-radio.biz FlexRadio@flex-radio.biz Date: Monday, April 9, 2012, 10:04 AM quote Or, just turn down the drive as you are supposed to. /quote SUPPOSED to is the key phrase here. Isn't the point of ALC to be a safeguard? Obviously you don't set all knobs right (I *love* that phrase) and rely on ALC to take care of the level-setting for you. Won't ALC save you from roasting your amp if you forget to turn down the drive power? There are lots of amps that don't have 100W inputs. The KPA500 needs 30W-40W of input, for example. It's easy to forget to turn down your output to the right level: Say you're listening around barefoot, you hear some DX and decide you need the amp. You flick on the amp and in the heat of battle you neglect to turn down the drive on the Flex. WHAM! I can't see how ALC can be a *bad* thing assuming it's used properly. Am I missing something? Peter K1PGV ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex 3000 Question from a Newbie
As good a radio as Flex is they decided not to include an ALC line in the radio, at least one you can physically connect to an amplifier. Occasionally they give you useless things like the scope because it is easy to include and not have a physical ALC maybe because it is not easy? In any event BUY THE 3000, it is better than most others And the customer service is exceptional Burt --- On Sun, 4/8/12, Martin Bluhm w8ak...@gmail.com wrote: I've just about made up my mind to purchase a 3000; however, I Have one question. I have a ALS 600 amp that I want to use with the 3000. It utilizes the send and alc lines. I have found the send output on the 3000; but am a loss for the alc control. Does anyone have this configuration and how did you hook it up? Thanks to all for your help in answering my questions on the cw latency. I believe I can live with it and do some work arounds. 73 Marty W8AKS ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] band conditions
Not that dead, I just worked ZL1RD Brevity is the soul of wit-Shakespeare If you are too big for a small job, you are too small for a big job. --- On Sat, 4/7/12, Steve Sterling f...@sgsterling.com wrote: 10M was certainly dead this morning from the west coast anyway. Getting ready to do a noon net on 40M soon. Steve On 4/7/2012 10:44 AM, paul glassman wrote: Hi all, What are you experiencing with band conditions? I cant tell if I have antenna problems, rig problems or the bands are dead? Thanks Paul w8jn ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] New Release
The situation could not have been explained any better.I joined this reflector in order to gain information when I bought my 3000.There is so much griping and complainuing that I am about to unsubscribe.Leave Flex alone and let them do their work for the benefit of all Flex owners. BurtAF5AA From: bmil...@ecso.com To: FlexRadio@flex-radio.biz Date: Sat, 25 Feb 2012 18:17:27 -0700 Subject: Re: [Flexradio] New Release Stick me with a fork! I have held this in for a LONG time but here goes. Can't blame FLEX can you for not releasing the info here? In the GOOD olden days we (FLEXERS)used to be able to help with the updates on the Alpha and Beta testing (in my opinion the BEST part of the FLEX experience now long gone) until people started to complain and gripe about it. Then they let us know when the next release may be finished and if it didn't come out the exact second that was approximated people would trash the FLEX programming team. Now Tim has let it slip on another medium about the update on Face book and now AGAIN every one is bitching about it again. I think if this EMAIL group is to be worth anything in the future it is TIME for a moderator to take over this EMAIL group. If you don't want to join face book then don't why do you need to comment about it. Do us ALL a favor and stop the bitching about every little thing FLEX does or doesn't do on YOUR time table it will ONLY hurt us as FLEX users and keep every thing more hush hush. Ask your self, would you work under these negative conditions? You can flame me if you like but that doesn't mean this isn't the truth. FLAMERS PLEASE do if off the list server by direct EMAIL so it doesn't take up any more bandwidth and you don't look stupid to the whole group. 73's and please, lets be grown up's and be patient and appreciative of the FLEX team and each other. Bret WX7Y -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Stan Sent: Saturday, February 25, 2012 1:57 PM To: Don; [FlexRadio] Subject: Re: [Flexradio] New Release Amen. Stan, WA2UET -Original Message- From: DonSent: Saturday, February 25, 2012 3:51 PMTo: [FlexRadio]Subject: [Flexradio] New Release It's not so much as to whether Facebook is good or bad or that a lot of people use it or not. In fact I'm glad that it is there for those who want to use it. It's that FlexRadio and FlexEdge were started to help FlexRadio customers with problems and information about advances. Now it sounds like they may be abandon for Facebook and no one told us It's a little disappointing knowing that information was given out there and not here. Don, kd6hq___FlexRadio Systems Mailing ListFlexRadio@flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flex radio_flex-radio.bizArchives: http://www.mail-archive.com/flexradio%40flex-radio.biz/Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___FlexRadio Systems Mailing ListFlexRadio@flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flex radio_flex-radio.bizArchives: http://www.mail-archive.com/flexradio%40flex-radio.biz/Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ -- This message has been scanned for viruses anddangerous content by MailScanner, and isbelieved to be clean. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Leaving Flex 5000A on all day ?
Of course don't worry about it, electricity is free, right? In my station with a Flex 5000A The computer draws 155 watts The power supply for the Flex draws 26 watts with the Flex off The power supply for the Flex draws 51 watts with the Flex on in standby The power supply for the Flex draws 67 watts with the Flex in receive The power supply for the Flex draws 446 watts with the Flex on CW transmit 100 watts on 15m The power supply for the Flex draws 500 watts with the Flex on CW on 160 meters My DX-40 to put out 40w draws 165w whereas my Flex to put out 40 draws 320 watts from its power supply The power supply is an Astron RS 20A --- On Sat, 1/28/12, Bill D li...@hamtx.com wrote: I'll keep doing what I'm doing and stop worrying about it. Bill - KE5YA On Sat, Jan 28, 2012 at 12:39 PM, w2...@yahoo.com w2...@yahoo.com wrote: Same here; heck, I rarely even turn PSDR off. The radio (idling) probably will not draw enough power to be a problem. My entire station (Flex 5000A, AT-Auto, FT-8900R, and TT4) runs from the Astron RS-35M, which has been on for 30 years without a glitch. Sent from my Verizon Wireless 4G LTE Phone -Original message- From: Drax Felton draxfel...@gmail.com To: Bill D li...@hamtx.com Cc: flexradio@flex-radio.biz Sent: Sat, Jan 28, 2012 18:16:16 GMT+00:00 Subject: Re: [Flexradio] Leaving Flex 5000A on all day ? Mines been running for months. No problems. On Jan 28, 2012 1:04 PM, Bill D li...@hamtx.com wrote: Hello, Once I turn on my Flex 5000a for the day, I usually leave it on until I know I'm done for that day. Sometimes I leave PSDR running, but sometimes I stop and close PSDR and just leave the 5000 power on. I have always thought turning equipment on and off several times a day is asking for trouble. I come and go in the shack several times a day, sometimes hours apart. Of coarse I turn it all off and unplug everything if bad weather is expected. My main question I guess is there any problem with leaving the 5000a on without running PSDR for hours at a time. Thanks, Bill - KE5YA __**_ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/**flexradio%40flex-radio.biz/http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ __**_ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/**flexradio%40flex-radio.biz/http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ __**_ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/**mailman/listinfo/flexradio_**flex-radio.bizhttp://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/**flexradio%40flex-radio.biz/http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex 5000 C ?
you did not break it Brevity is the soul of wit-Shakespeare If you are too big for a small job, you are too small for a big job. --- On Tue, 1/24/12, Ed Stallman n...@airmail.net wrote: From: Ed Stallman n...@airmail.net Subject: Re: [Flexradio] Flex 5000 C ? To: flexradio@flex-radio.biz Date: Tuesday, January 24, 2012, 6:17 AM Did I break the reflector with the F5k C question ? Or am I not getting mail any longer ? this is a test Ed At 06:13 PM 1/22/2012, Ed Stallman wrote: Is their a place to add a second Hard Drive in a Flex 5000C ? or dos it have 2 already ? Ed ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] High SWR, why
Last night I had high SWR over 25:1 on every antenna every band on bypass. I figured my antennas fell down. This was after I used the 5000 tuner, the went back to bypass. I went to auto tune again, then back to bypass and all was normal This ever happen to anyone Burt ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] [FlexRadio] Re: Transmit spikes - continuing problem
I know you are not one of my fans but that was extremely well said The analogy can apply to many areas of life Burt --- On Wed, 1/4/12, Bill Marvin bmar...@comcast.net wrote: When you took the training wheels off your first bicycle, and promptly fell over, did you tell your mom and dad that they shouldn't have bought you that bike? I doubt it. Learn the radio before you put it down. If you actually have a hardware problem, the people at FlexRadio are second to none at customer service. They will make it right, if need be. Keep on Flexing.. 73, Bill - W1MPY -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of W2BLC Sent: Wednesday, January 04, 2012 7:47 AM To: flexradio@flex-radio.biz Subject: [Flexradio] [FlexRadio] Re: Transmit spikes - continuing problem I have tried all the suggestions either last evening or previously. Last evening I removed the 3000 from my desk and set it on a work bench in the garage. Then I dragged the computer out to the garage and a dummy load. I used the new MH-31 mic. The result was SPIKES I like the receiver, the filters, the screen - but, I cannot tolerate the spike problems. I will miss the good qualities of the 3000 - but, certainly not the spikes and all the time and money wasted on this project. Some things are just not to be and this is one of them. Thanks to all who attempted to help me - your efforts are truly appreciated. Bill W2BLC -- Sent from my blackboard - written in chaulk ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ - No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1901 / Virus Database: 2109/4722 - Release Date: 01/04/12 - No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.1901 / Virus Database: 2109/4722 - Release Date: 01/04/12 ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] XMIT spike problem
Flex radios can be a pain in the neck at times but stick with it. The results will be worth it The edge of technology has its drawbacks but you will not find better customer service from any ham radio company Burt --- On Tue, 1/3/12, W2BLC w2...@necoastal.net wrote: This was a Christmas present from the XYL - and she is so very sorry she bought it for me. Those are her words. In all my years of hamming, I have never experienced anything as difficult to work with as this radio. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex 1500 using External Transmitter for AM
You can use a computer generated voice and you won't even have to speak (sounds not all that different from SSB). Why don't you advise broadcast stations they can use SSB? AM sounds natural even if it is less efficent. You can take your vitamins in a pill (AKA SSB) or eat them (AM), Burt From: Brian Lloyd brian-wb6...@lloyd.com To me also. I cannot imagine why someone would run AM at all because one can do precisely the same thing using SSB at 1/8 the power and 1/2 the bandwidth. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] {SPAM?} Re: Flex 1500 using External Transmitter for AM
And cheaper, I can talk to my daughter in Asia for free online --- On Mon, 1/2/12, Mike Manship w...@iquest.net wrote: Why would anyone use ham radio when it would be so much easier just to use a telephone? 73 de Mike W9OJ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex 1500 using External Transmitter for AM
If it's so easy to reinject the carrier at the exact phase AND FREQUENCY why does sideband sound like sideband and not like AM? --- On Mon, 1/2/12, Brian Lloyd brian-wb6...@lloyd.com wrote: If you demodulate an SSB signal by reinjecting the carrier at precisely the correct frequency (very easy to do today), the result is indistinguishable from the same baseband signal transmitted by classical AM and then recovered using an envelope detector. (Well, not exactly. The envelope detector tends to introduce more nonlinearity than a product detector.) But I am sorry I entered into this discussion. Please carry on without me. -- Brian Lloyd, WB6RQN/J79BPL 3191 Western Dr. Cameron Park, CA 95682 br...@lloyd.com +1.767.617.1365 (Dominica) +1.916.877.5067 (USA) ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] The Amazing Flex 5000
Now that the even more amazing Neal got me on the air on PSK, RTTY I have made about 40 contacts and all but two gave me a 599, I am thinking of running the power down to one watt. You might think that these stations I worked at 599 programmed into their software but we all know the Flex is amazing and that cannot be the answer can it? Burt ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Flex For Sale, 5000A with Tuner; Heil microphone
I purchased my 5000 for the same reason but in my case it did bring me back Add to that it keeps you interested in the fact there always seems to be something to fix, but isn't that part of the hobby, to learn? I LOVE THE PANADAPTER LOVE LOVE LOVE LOVE LOVE LOVE it --- On Fri, 12/23/11, Guy Harris w6...@guysfreehold.com wrote: From: Guy Harris w6...@guysfreehold.com Subject: [Flexradio] Flex For Sale, 5000A with Tuner; Heil microphone To: 'FlexRadio' FlexRadio@flex-radio.biz Date: Friday, December 23, 2011, 5:01 PM Flex-5000A with Tuner. Heil HM-5 Microphone (HC-5 element). Mic cable, 8ft. PCIe FireWire card (SIIG with TI chip). FireWire cable, two each: Granitedigital 1 meter and the one that came with the radio. Original carton. Non-smoking environment. Look up my call on qrz and you can see it. I purchased this radio with the hopes that it would spur my lagging interest in the hobby; it didn't really; so it has not seen much use in the 13 months I've had it. I have used it on SSB, CW, PSK31, and WSPR, all without issues. Really great radio. $2800.00 for the lot. Shipping to lower 48 included. 73, -- ~~~*Guy Harris* , W6NJX God is a comedian playing to an audience too afraid to laugh.-- Voltaire ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Frozen, the process
I attached the processes when my Flex froze -- next part -- An embedded and charset-unspecified text was scrubbed... Name: System Idle Process.txt URL: http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20111218/a1cdee2d/attachment.txt ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Frozen retry
I guess I have to put the process in txt My 5000 froze and here is the processes Process PID CPU Private Bytes Working Set Description Company Name System Idle Process 0 72.77 0 K 24 K System 4 1.42112 K 304 K Interrupts n/a 7.150 K 0 K Hardware Interrupts and DPCs smss.exe 340 424 K 1,080 K csrss.exe 444 0.011,984 K 4,244 K wininit.exe 640 1,472 K 4,252 K services.exe 696 0.104,648 K 8,284 K svchost.exe 840 0.104,328 K 9,196 K WmiPrvSE.exe 23443,124 K 6,752 K dllhost.exe 41242,412 K 6,748 K FlashUtil11e_ActiveX.exe 45561,724 K 5,912 K Adobe® Flash® Player Installer/Uninstaller 11.1 r102Adobe Systems, Inc. WmiPrvSE.exe 474015,440 K19,136 K dllhost.exe 42162,060 K 5,596 K COM Surrogate Microsoft Corporation svchost.exe 944 0.014,164 K 7,788 K MsMpEng.exe 10040.0996,744 K72,600 KAntimalware Service Executable Microsoft Corporation atiesrxx.exe 448 1,456 K 4,084 K atieclxx.exe 13722,096 K 5,780 K svchost.exe 940 0.1029,420 K27,948 K audiodg.exe 454817,656 K18,912 K svchost.exe 10760.4095,760 K103,488 K WUDFHost.exe 2832 0.01 2,068 K 5,920 K dwm.exe 28122.3135,272 K44,448 KDesktop Window Manager Microsoft Corporation svchost.exe 11000.0523,600 K41,228 K taskeng.exe 26162,128 K 6,072 K ASROC.exe 26640.968,788 K 4,500 K CTAudSvc.exe 12521,332 K 4,276 K svchost.exe 13360.018,704 K 15,908 K svchost.exe 14801.8013,828 K15,324 K spoolsv.exe 16040.066,976 K 12,368 K svchost.exe 163611,692 K14,556 K armsvc.exe17161,180 K 3,876 K DHQFMSvc.exe 1760 0.01 2,724 K 6,552 K NBService.exe 18002,908 K 7,732 K schedul2.exe 18721,504 K 4,080 K svchost.exe 19042,136 K 5,680 K Host Process for Windows Services Microsoft Corporation WLIDSVC.EXE 1940 0.01 7,276 K 15,564 K WLIDSVCM.EXE 12001,216 K 3,168 K svchost.exe 22282,392 K 5,700 K NisSrv.exe24165,764 K 3,092 K svchost.exe 30600.037,196 K 69,676 K IntuitUpdateService.exe 185219,668 K6,436 K wmpnetwk.exe 25520.0112,336 K13,204 K SearchIndexer.exe 27040.0143,520 K22,568 K SearchProtocolHost.exe 4720 0.01 3,772 K 7,920 K SearchFilterHost.exe 26562,524 K 6,108 K taskhost.exe 26402,836 K 5,932 K Host Process for Windows Tasks Microsoft Corporation XMBLicensing.exe 38961,104 K 3,120 K svchost.exe 33280.0110,332 K13,164 K svchost.exe 3520980 K 2,664 K lsass.exe 712 0.154,860 K 11,684 K lsm.exe720 0.022,424 K 4,108 K csrss.exe 660 0.832,512 K 6,152 K winlogon.exe904 2,884 K 6,844 K explorer.exe18120.1545,804 K75,744 KWindows ExplorerMicrosoft Corporation rundll32.exe 30806,264 K 5,576 K Windows host process (Rundll32) Microsoft Corporation msseces.exe30965,936 K 13,812 KMicrosoft Security Client User InterfaceMicrosoft Corporation Gmail Notifier.exe 3152 0.01 20,964 K31,092 KGmail Notifier www.gmailnotifier.com PowerSDR.exe 37924.7880,172 K88,552 KPowerSDR FlexRadio Systems procexp.exe44362,340 K 6,008 K Sysinternals Process Explorer Sysinternals - www.sysinternals.com procexp64.exe 44886.6018,316 K33,248 KSysinternals Process Explorer Sysinternals - www.sysinternals.com TimounterMonitor.exe3264 0.01 7,104 K 7,516 K Monitor for Acronis True Image Backup Archive Explorer Acronis FLVSrvc.exe 32800.021,320 K 4,448 K FLV Service for Freecorder 4 Applian Technologies, Inc. VDeck.exe 33520.0110,796 K6,324 K VIA HD Audio CPL VIA MOM.exe 34320.0339,460 K5,592 K Catalyst Control Center:
Re: [Flexradio] FlexRadio Digest, Vol 80, Issue 17
You suggestion would make the scope finally useful Brevity is the soul of wit-Shakespeare If you are too big for a small job, you are too small for a big job. --- On Sun, 12/18/11, ke...@3950.net ke...@3950.net wrote: 4. Adding the ability to see the modulated RF (really IF) on the receiver scope, instead of just the demodulated audio. This tells you a lot about the received signal, especially on AM, and would be a very valuable tool. With best Yule wishes, Kevin, WB4AIO. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] Frozen PowerSDR
Can anyone guide me as to why? Flex Freeze http://www.youtube.com/watch?v=8_NRa3eutlQ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Frozen PowerSDR
My computer was recommended by Neal, any more insults? It was a quick video, but since you are into examining camera work check these out I expect you will be fair minded? Flex posted some on their site Maybe you might so something most hams rarely do? APOLOGIZE Flex ARRL http://www.youtube.com/watch?v=rUA3TNNIt4M Flex VAC http://www.youtube.com/watch?v=w4FsuLidTwA Flex 5000 http://www.youtube.com/watch?v=ZnidaUi2L_8 Flex Jan 09 http://www.youtube.com/watch?v=1JCOR_lbTzI Flex FDR http://www.youtube.com/watch?v=pI4KRIMDb0Q --- On Sat, 12/10/11, Jim Jannuzzo jsqu...@msn.com wrote: Yes. It appears that your computer setup is the same high quality as your camera work. Date: Sat, 10 Dec 2011 07:52:59 -0800 From: k1...@yahoo.com To: flexradio@flex-radio.biz Subject: [Flexradio] Frozen PowerSDR Can anyone guide me as to why? Flex Freeze http://www.youtube.com/watch?v=8_NRa3eutlQ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Frozen PowerSDR
I downloaded and ran the program however there is a lot of information there that I am clueless to understand. What am I looking for? Also when PowerSDR freezes on startup it is not all the time and varies from 30 seconds to 3 minutes, that makes it harder to figure out Some have already jumped to the conclusion I am an idiot (maybe true) and that I am against Flex (NOT TRUE) In fact few are better than Time in trying to help, Neal too. Burt --- On Sat, 12/10/11, Richard Clafton rclaf...@riroc.com wrote: From: Richard Clafton rclaf...@riroc.com Subject: Re: [Flexradio] Frozen PowerSDR To: flexradio@flex-radio.biz Date: Saturday, December 10, 2011, 11:23 AM The first step is to look at what processes are running when you start up. Then dig deeper into the PowerSDR process to see what handles are in use, perhaps locked. This is more than likely due to another process hooking and delaying the startup. SysInternals Process Explorer is the tool of choice. http://technet.microsoft.com/en-us/sysinternals/bb896653 Unfortunately the video will not help anyone to debug your issue, if you are comfortable digging into Windows and understand what the tool presents, then go for it. If not..a remote session by Neal or another windows tech is a good option. -- Richard A Clafton | the brITish guy | W5\G7EIX RIROC - Hosting - Development - Technology http://www.riroc.com | rclaf...@riroc.com Jack of all trades, master of none, though often better than the master of one. -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Burt Sent: Saturday, December 10, 2011 10:12 AM To: flexradio@flex-radio.biz; Jim Jannuzzo Subject: Re: [Flexradio] Frozen PowerSDR My computer was recommended by Neal, any more insults? It was a quick video, but since you are into examining camera work check these out I expect you will be fair minded? Flex posted some on their site Maybe you might so something most hams rarely do? APOLOGIZE Flex ARRL http://www.youtube.com/watch?v=rUA3TNNIt4M Flex VAC http://www.youtube.com/watch?v=w4FsuLidTwA Flex 5000 http://www.youtube.com/watch?v=ZnidaUi2L_8 Flex Jan 09 http://www.youtube.com/watch?v=1JCOR_lbTzI Flex FDR http://www.youtube.com/watch?v=pI4KRIMDb0Q --- On Sat, 12/10/11, Jim Jannuzzo jsqu...@msn.com wrote: Yes. It appears that your computer setup is the same high quality as your camera work. Date: Sat, 10 Dec 2011 07:52:59 -0800 From: k1...@yahoo.com To: flexradio@flex-radio.biz Subject: [Flexradio] Frozen PowerSDR Can anyone guide me as to why? Flex Freeze http://www.youtube.com/watch?v=8_NRa3eutlQ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Frozen PowerSDR
I thought when you said high quality you were being sarcastic, silly me. One of the dumbest things I did was getting a computer recommended by Neal over actually getting one from him. If I bought from him I have a feeling I would never have a problem and I suggest anyone reading this do not screw around buy from Neal Burt --- On Sat, 12/10/11, Jim Jannuzzo jsqu...@msn.com wrote: What, me insulting? I said high quality, and you read an insult. You are, however, beginning to get on my nerves. You're obviously having computer issues unrelated to PowerSDR (which are causing PSDR to crash and freeze), because this is not a common occurrence among the thousands of PSDR users. While Neal may have recommended the components, he apparently did not build your PC and install the software. Since you're at a loss, why not hire Neal to go through your PC, find the offending software or drivers, and fix them. It could be a simple fix, and it would save you and your audience unnecessary grief. Jim KJ2P Date: Sat, 10 Dec 2011 08:12:23 -0800 From: k1...@yahoo.com Subject: RE: [Flexradio] Frozen PowerSDR To: flexradio@flex-radio.biz; jsqu...@msn.com My computer was recommended by Neal, any more insults? It was a quick video, but since you are into examining camera work check these out I expect you will be fair minded? Flex posted some on their site Maybe you might so something most hams rarely do? APOLOGIZE Flex ARRL http://www.youtube.com/watch?v=rUA3TNNIt4M Flex VAC http://www.youtube.com/watch?v=w4FsuLidTwA Flex 5000 http://www.youtube.com/watch?v=ZnidaUi2L_8 Flex Jan 09 http://www.youtube.com/watch?v=1JCOR_lbTzI Flex FDR http://www.youtube.com/watch?v=pI4KRIMDb0Q --- On Sat, 12/10/11, Jim Jannuzzo jsqu...@msn.com wrote: #yiv1537033050 .yiv1537033050ExternalClass #yiv1537033050ecxyiv928776631 .yiv1537033050ecxyiv928776631hmmessage P {padding:0px;} #yiv1537033050 .yiv1537033050ExternalClass #yiv1537033050ecxyiv928776631 body.yiv1537033050ecxyiv928776631hmmessage {font-size:10pt;font-family:Tahoma;} Yes. It appears that your computer setup is the same high quality as your camera work. Date: Sat, 10 Dec 2011 07:52:59 -0800 From: k1...@yahoo.com To: flexradio@flex-radio.biz Subject: [Flexradio] Frozen PowerSDR Can anyone guide me as to why? Flex Freeze http://www.youtube.com/watch?v=8_NRa3eutlQ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Frozen PowerSDR
What do you think is wrong with my computer? So my computer broke at the exact instant I upgraded my PowerSDR version? Because this is a new problem. I did not think hardware could break from a software upgrade However after listening to you on AM I know you know your stuff So like Alfred E. Neuman, I am all ears Burt --- On Sat, 12/10/11, Bill Marvin bmar...@comcast.net wrote: Fix your computer and, amazingly, PowerSDR will be fixed. 73, Bill - W1MPY ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Frozen PowerSDR
It only seems to freeze at the first use of the day and the rest of the computer continues to function. --- On Sat, 12/10/11, Ross Stenberg ross.stenb...@charter.net wrote: From: Ross Stenberg ross.stenb...@charter.net Subject: Re: [Flexradio] Frozen PowerSDR To: flexradio@flex-radio.biz Date: Saturday, December 10, 2011, 1:17 PM I can only relate to one of my experiences. The firewire connection on the computer was not fully seated and the result was a intermittent freeze. I did not have the systems sound on otherwise it would have warned me with a bing. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Griffin USB Knob Questions
I originally got one of those after market knobs, total pain in butt. My mouse does it all But others have a different view --- On Sat, 12/10/11, Richard Lawn rjl...@gmail.com wrote: From: Richard Lawn rjl...@gmail.com Subject: [Flexradio] Griffin USB Knob Questions To: flexradio@flex-radio.biz Date: Saturday, December 10, 2011, 3:14 PM I just turned up a Griffin USB knob which I assume can be used with my Flex5K. But is it worth it? Do I need a driver for it and I assume that the USB cable would plug into any available USB port? But again, is it worth it for Flex tuning control? RIck W2JAZ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Fan noise
No keep going, I am one of your greatest fans Burt Brevity is the soul of wit-Shakespeare If you are too big for a small job, you are too small for a big job. --- On Thu, 12/8/11, William H. Fite omni...@gmail.com wrote: Noisome might be a better description as others on the reflector are probably sick of hearing Duane and me go back and forth on this topic. On 12/8/11, Ross Stenberg ross.stenb...@charter.net wrote: Sounds kind of noisy to me (pun intended) Well I really don't like headphones for one, and more importantly they make it hard to listen to 4 or 5 radios at one time. And a key to listening to that many radios at one time is having the ability to spatially orientate the various audio sources, headphones and audio combiners simply don't allow for that. ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] Fan noise
Are you supposed to add alcohol to the egg nog? --- On Thu, 12/8/11, William H. Fite omni...@gmail.com wrote: Bottom line: If you think it is going to bother you, it is going to bother you. I recommend eggnog therapy in all such cases. Two or three cups and you won't give a damn whether the fans are noisy or not. Another two or three and you won't care if the fans are even running or not. Your gear, however, will care... Bill ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] 3000 or 5000
I am not really concerned about a mike picking up the fan, I am concerned about me being bugged by it. I do not even like the fan on my computer. I never heard a fan on the 5000. It has a fan? --- On Wed, 12/7/11, konrad schultz konra...@hotmail.com wrote: From: konrad schultz konra...@hotmail.com Subject: Re: [Flexradio] 3000 or 5000 To: joe.n...@gmail.com, flexradio@flex-radio.biz Date: Wednesday, December 7, 2011, 9:59 AM I love my new 3000 and the fan noise makes no difference to me since I use a professional directional dynamic microphone. Most decent directional microphones will not pic up fan noise coming from behind them as they are designed to be receive sound from the front and slightly off front to either side. My FLEX 3000 on my desk is maybe 16 inches from the back of the mic - which is on an $80 telescoping desk boom. No problems. Wiring the modular mic plug was a small challenge, but the FLEX website has detailed explanations of how to wire various mics/cords to them. It's really not that hard. Good luck, Best Konrad W1KON Date: Wed, 7 Dec 2011 09:45:51 -0500 From: joe.n...@gmail.com To: flexradio@flex-radio.biz Subject: [Flexradio] 3000 or 5000 To me, the fan in the 3000 is very noisy and you have to deal with the modular RJ45 mic plug. It's worth it to me to have the 5000. Joe N9VX -- I am thinking of going to the 3000 from the 5000. I do not care about a second receiver. Is there any other disadvantage for making the move. It just seems the 5000 is more than I need, it is not a money issue. Advice? Burt ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
Re: [Flexradio] 3000 or 5000
to maybe save some money and get a new one with a warranty Brevity is the soul of wit-Shakespeare If you are too big for a small job, you are too small for a big job. --- On Mon, 12/5/11, Bill Tynan billandmat...@windstream.net wrote: From: Bill Tynan billandmat...@windstream.net Subject: Re: [Flexradio] 3000 or 5000 To: Burt k1...@yahoo.com, FlexRadio@flex-radio.biz Date: Monday, December 5, 2011, 10:56 PM Burt: If you are, or will ever get interested in VHF then I assert that the V/U module that can be added to the 5K makes it the preferable of the two. I don't really know that much abt the 3K. Since you already have a 5K, why would you want to change? 73, Bill Tynan, W3XO Happy 5K Owner - Original Message - From: Burt k1...@yahoo.com To: FlexRadio@flex-radio.biz Sent: Monday, December 05, 2011 9:25 PM Subject: [Flexradio] 3000 or 5000 I am thinking of going to the 3000 from the 5000. I do not care about a second receiver. Is there any other disadvantage for making the move. It just seems the 5000 is more than I need, it is not a money issue. Advice? Burt ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/ ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
[Flexradio] 5 for 3
I was given the following advice by a well versed participant in this forum Right now I think a 5000a will sell for 2400-2500 and a new 3000 will cost you 1700, so you could possibly pocket 7-800 bucks. Thats not small change so I understand your question. If anyone wants to do the trade with the above in mind, let me know. Mine does have the tuner ___ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/