On Thursday 08 January 2004 23:45, Richard Hornby wrote:
- Original Message -
From: Richard Hornby
To: [EMAIL PROTECTED]
Sent: Wednesday, January 07, 2004 8:28 PM
Subject: Properties Tree and TSR2
Can somebody help here?
I am trying to see the properties tree using telnet to localhost 5500.
I don't see anything in the (telnet or fg) console window. Where is the
output displayed?
The fgfsrc default browser seems to be Netscape but I am using KExplorer
- how to change the file entry if required?
I want to work on putting real dials in the TSR2 instead of the digital
readouts - am I re-inventing the wheel?
I don't have any plans to do a 'proper' panel for the TSR-2 so please feel
free to go ahead and do one.
I used 'digital' instruments to cut down on the texture space requirements
and because I wanted to monitor the numbers while 'tuning' the fdm.
Also, I simply didn't know what a lot of the instruments did, how they
worked or what they displayed, which would have made making one a rather
lengthy process.
Finally, using the rate of climb setting in the autopilot slams the
elevators right back and they will not reset. Also, the heading setting
doesn't work. Is this a Nasal problem (guess).
Tks, R
That's a bit curious - it's set-up so that it should take-off on AP and
works ok here. From take-off, it should manage to climb to 20,000ft w/o
reheat but then you'll have to build up a bit speed before trying to
climb higher.
I have seen situations where the elevator appears to get locked, usually
in the full-up (climb) position, even though it may be well over the
target alt and should be commanding a descent. I've got to say that it
takes a fair bit of 'abuse' to get it in this state - for example,
forcing a vertical climb until stall using the joystick while either
alt-hold or terrain-follow is operating. Toggling alt-hold usually
clears this but screws up the terrain-follow separation.
LeeE
___
Flightgear-devel mailing list
[EMAIL PROTECTED]
http://mail.flightgear.org/mailman/listinfo/flightgear-devel
