Re: [gentoo-ppc-user] hda/hdc
Hello Randy On Sun, Jan 14, 2007 at 09:54:23PM -0500, Randy Barlow wrote: is there a way to see what the dmesg was for a kernel that didn't finish booting due to a kernel panic? Yes, netconsole as described in Documentation/networking/netconsole.txt. Greets, Michael -- Gentoo Linux developer, http://hansmi.ch/, http://forkbomb.ch/ pgpixy84offwz.pgp Description: PGP signature
Re: [gentoo-ppc-user] hda/hdc
On Mon, 2007-01-15 at 11:03 +0100, Michael Hanselmann wrote: Yes, netconsole as described in Documentation/networking/netconsole.txt. OK - now I'm really baffled - I've tried again but this time I used genkernel. However, even the genkerneled kernel can't seem to detect my hard drive! This time I was allowed to drop to a shell and the only hd* was hda, my cdrom. The thing that's killing me is that the gentoo boot cd is obviously able to do it, and I even copied the config from that cd over as per the genkernel instructions, still to no avail. Nathan, you mentioned having just installed on a bluewhite - I assume that these machines are enough similar that the config that you used should be good enough to work for me too - do you think you could send me your .config off list so I can try that out? Randy Barlow http://www.electronsweatshop.com The most remarkable thing about my mother is that for thirty years she served the family nothing but leftovers. The original meal has never been found. -- Calvin Trillin -- gentoo-ppc-user@gentoo.org mailing list
Re: [gentoo-ppc-user] hda/hdc
On Mon, 2007-01-15 at 11:37 -0500, Randy Barlow wrote: OK - now I'm really baffled - I've tried again but this time I used genkernel. However, even the genkerneled kernel can't seem to detect my hard drive! This time I was allowed to drop to a shell and the only hd* was hda, my cdrom. The thing that's killing me is that the gentoo boot cd is obviously able to do it, and I even copied the config from that cd over as per the genkernel instructions, still to no avail. Here is another clue that may be found to be interesting by you ppcers - when I boot into the live CD and dmesg, hdc (hard drive) is the last thing to be discovered, and of course happens right after the IDE interface is discovered. I'm wondering why it takes the boot process so long to see my IDE controller... Randy Barlow http://www.electronsweatshop.com The most remarkable thing about my mother is that for thirty years she served the family nothing but leftovers. The original meal has never been found. -- Calvin Trillin -- gentoo-ppc-user@gentoo.org mailing list
Re: [gentoo-ppc-user] hda/hdc
Hello Randy On Mon, Jan 15, 2007 at 11:37:25AM -0500, Randy Barlow wrote: OK - now I'm really baffled - I've tried again but this time I used genkernel. However, even the genkerneled kernel can't seem to detect my hard drive! This time I was allowed to drop to a shell and the only hd* was hda, my cdrom. Can you please post the kernel output, which you gather using netconsole, on an http server? I guess your kernel is missing some option, but I'm not sure which. Did you only check /dev/hd* or also what dmesg said? The thing that's killing me is that the gentoo boot cd is obviously able to do it, and I even copied the config from that cd over as per the genkernel instructions, still to no avail. You copied the actually running config from /proc/config.gz? Greets, Michael -- Gentoo Linux developer, http://hansmi.ch/, http://forkbomb.ch/ pgpKoPuFHS7d8.pgp Description: PGP signature
Re: [gentoo-ppc-user] hda/hdc
On Mon, 2007-01-15 at 18:57 +0100, Michael Hanselmann wrote: Can you please post the kernel output, which you gather using netconsole, on an http server? I guess your kernel is missing some option, but I'm not sure which. Did you only check /dev/hd* or also what dmesg said? I think I may have found the problem -- CMD646! It turns out that I had not enabled support for the IDE interface in the kernel. The lspci output was kind of obscure in helping me with this, but the dmesg of the live CD gave me the clue! Thanks to Michael and to Nathan for your help! I am now inside a shiny new ppc environment on my shiny old G3 :) You copied the actually running config from /proc/config.gz? Indeed. Thanks for your help! Randy Barlow http://www.electronsweatshop.com The most remarkable thing about my mother is that for thirty years she served the family nothing but leftovers. The original meal has never been found. -- Calvin Trillin -- gentoo-ppc-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
Hmmm, me either. I'm not sure about what it would be called. Do you have gkrellm installed? Sometimes I use it to see where the traffic is. That is how I knew it was iptables in my other thread. The data was getting there because gkrellm was seeing it but my system was not. No clue how one can see it and the other can't though. no i did not use gkrellm, i am just seting up the new desktop machine no X until now, i want to do the basics first! -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Asus F3JV AS022P installation tips
Hi, maybe someone would be glad if you post your experiences on the gentoo-wiki.com. I did this for mine (F3JM) its far from beeing complete til now, but maybe it helps someone. On 1/14/07, Mihamina Rakotomandimby (R12y) [EMAIL PROTECTED] wrote: Hi, For people intending to buy an Asus F3JV-x: http://www.asso-polyvalente.fr/workspaces/members/mihamina/public/asus-f3jv-as022p Cheers -- gentoo-user@gentoo.org mailing list -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Setting up a home router
-Original Message- From: Daniel Pielmeier [mailto:[EMAIL PROTECTED] Sent: 14 January 2007 19:27 To: gentoo-user@lists.gentoo.org Subject: [gentoo-user] Setting up a home router I can't ping from the desktop to the internet. ping www.gentoo.org PING www.gentoo.org (38.99.64.202) 56(84) bytes of data. --- www.gentoo.org ping statistics --- 13 packets transmitted, 0 received, 100% packet loss, time 11999ms I would check that you have done: echo 1 /proc/sys/net/ipv4/ip_forward Also make sure ICMP isn't blocked anywhere. David Note: These views are my own, advice is provided with no guarantee of success. I do not represent anyone else in any emails I send to this list. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] can no longer switch to a VT - OT
Benno Schulenberg wrote: Gabriel Rossetti wrote: have the same problem as with Gnome, still can[not] switch to a VT... If I open a term and try the usual Ctrl + Alt + F1 to F7 key combination I get : PQRS;7~;7~;7~ First: stop top-posting. A: Because it messes up the order in which people read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on mailing lists? Second: re-emerge xf86-input-keyboard, xkeyboard-config, and xkbcomp. Then restart X. If then it still doesn't work, show the output of 'setxkbmap -print' and 'emerge --info'. Benno Ok, it worked great! Thanks Benno and all the rest for your help/suggestions! Gabriel -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Asus F3JV AS022P installation tips
On 1/15/07, Nelson, David (ED, PARD) [EMAIL PROTECTED] wrote: -Original Message- From: Mihamina Rakotomandimby (R12y) [mailto:[EMAIL PROTECTED] Sent: 14 January 2007 18:25 To: gentoo-user@lists.gentoo.org Subject: [gentoo-user] Asus F3JV AS022P installation tips Hi, For people intending to buy an Asus F3JV-x: http://www.asso-polyvalente.fr/workspaces/members/mihamina/pub lic/asus-f3jv-as022p Cheers Could you possibly add that info to the Gentoo Wiki? Slightly more accessable there, and of course you could cite your site (pun not intended) as the source. David Note: These views are my own, advice is provided with no guarantee of success. I do not represent anyone else in any emails I send to this list. -- gentoo-user@gentoo.org mailing list hehe same thoughts at the same time :-) -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
I would check that you have done: echo 1 /proc/sys/net/ipv4/ip_forward I think this is set, but i will check again. Also make sure ICMP isn't blocked anywhere. I have only blocked ping from the internet to the firewall and nowhere else. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Telling emerge to continue when something goes wrong
On 1/15/07, Boyd Stephen Smith Jr. [EMAIL PROTECTED] wrote: On Sunday 14 January 2007 19:08, Iván Pérez Domínguez [EMAIL PROTECTED] wrote about 'Re: [gentoo-user] Telling emerge to continue when something goes wrong': Boyd Stephen Smith Jr. wrote: I've also attached a longer system update script that I use, for reference. I've been taking a look at the script. I wonder why using emerge --sync at the beginning and update-eix at the end instead of an eix-sync. I want the information returned by eix after the script completes to take into account the package updates that may occur during the portage or world updates. I also want those updates to take into account the most recent portage tree. So, I need a sync operation before the updates and a eix-update after them. Thus, I can't combine the two operations into a single eix-sync. -- If there's one thing we've established over the years, it's that the vast majority of our users don't have the slightest clue what's best for them in terms of package stability. -- Gentoo Developer Ciaran McCreesh Hi, have a look at this http://www.gentoolinux.org/news/en/gwn/20061204-newsletter.xml section 3, maybe its what you want or you could modify it to suit your needs. -- gentoo-user@gentoo.org mailing list
[gentoo-user] How can I emerge a program with debugging options?
Hello, I would like to emerge a program with debugging options CFLAGS=-g and without strip at the end of the build. I know that I could do this: $ export CFLAGS=-g; emerge mypackage But then it strip at the end the binary file (/usr/bin/strip) and I loss my debugging symbols in the binary file of the package. Does somebody knows how I could do this by an easy way? I had already the idea to rename the program /usr/bin/strip in /usr/bin/strip.old, but this is a little ugly! :-) -- E-Mail sent with anti-spam site TrashMail.net! Free disposable email addresses: http://www.trashmail.net/ -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] How can I emerge a program with debugging options?
Am Montag, 15. Januar 2007 10:13 schrieb ext qfpvajdy: I would like to emerge a program with debugging options CFLAGS=-g and without strip at the end of the build. I know that I could do this: $ export CFLAGS=-g; emerge mypackage But then it strip at the end the binary file (/usr/bin/strip) and I loss my debugging symbols in the binary file of the package. Does somebody knows how I could do this by an easy way? Put FEATURES=nostrip into /etc/make.conf. Bye... Dirk -- Dirk Heinrichs | Tel: +49 (0)162 234 3408 Configuration Manager | Fax: +49 (0)211 47068 111 Capgemini Deutschland | Mail: [EMAIL PROTECTED] Hambornerstraße 55 | Web: http://www.capgemini.com D-40472 Düsseldorf | ICQ#: 110037733 GPG Public Key C2E467BB | Keyserver: www.keyserver.net pgpAVKPpfReoq.pgp Description: PGP signature
[gentoo-user] no Affix bluetooth protocol stack on gentoo?
Hello, is there a reason (other than no one having created an ebuild) that the Affix bluetooth protocol stack is not in portage? I know there is Bluez, but it seams not to work as well with symbian os based smartphones. Thank you, Gabriel -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] How can I emerge a program with debugging options?
Hello On Mon, Jan 15, 2007 at 10:13:46AM +0100, qfpvajdy wrote: Does somebody knows how I could do this by an easy way? I had already the idea to rename the program /usr/bin/strip in /usr/bin/strip.old, but this is a little ugly! :-) Have a look at man make.conf, there are many nice options, one of them, if I remember correctly, was nostrip. -- This email was generated by a biological random generator. If you want more random text, just respond to this email. Michal vorner Vaner pgpyWfxmj0jQn.pgp Description: PGP signature
Re: [gentoo-user] Telling emerge to continue when something goes wrong
2007/1/15, Jakob [EMAIL PROTECTED]: On 1/15/07, Boyd Stephen Smith Jr. [EMAIL PROTECTED] wrote: On Sunday 14 January 2007 19:08, Iván Pérez Domínguez [EMAIL PROTECTED] wrote about 'Re: [gentoo-user] Telling Hi, have a look at this http://www.gentoolinux.org/news/en/gwn/20061204-newsletter.xml section 3, maybe its what you want or you could modify it to suit your needs. Nice : ) I'll use that script from now on. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
Daniel Pielmeier wrote: I would check that you have done: echo 1 /proc/sys/net/ipv4/ip_forward I think this is set, but i will check again. Also make sure ICMP isn't blocked anywhere. I have only blocked ping from the internet to the firewall and nowhere else. Send the output from iptables-save, please. Otherwise we could only guess if the problem is with your firewall rules or somewhere else. -- Best regards, Daniel -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] How can I emerge a program with debugging options?
Dnia poniedziałek, 15 stycznia 2007 10:13, qfpvajdy napisał: Hello, I would like to emerge a program with debugging options CFLAGS=-g and without strip at the end of the build. I know that I could do this: $ export CFLAGS=-g; emerge mypackage Take a look at: http://www.gentoo.org/proj/en/qa/backtraces.xml P.S. Pls. correct your signature separator. It should be dash-dash-SPACE-enter. You have just dash-dash-enter. -- Pawel Kraszewski www.kraszewscy.net -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
Send the output from iptables-save, please. Otherwise we could only guess if the problem is with your firewall rules or somewhere else. Ok, i will do that when i am back home. i thought the output from iptables -L in my original post was enough. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
Hi, On Sun, 14 Jan 2007 20:27:11 +0100 Daniel Pielmeier [EMAIL PROTECTED] wrote: I can connect from the router to the internet. I can log in from the router to the desktop per ssh and back. I have set up an rsync on the router and rsync works from the desktop. I have set up dnsmasq on the server and dns is working on the desktop. I can ping between router and desktop and from the router to the internet [...] I can't ping from the desktop to the internet. OK, so forwarding is broken. route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface dslb-088-067-01 * 255.255.255.255 UH0 00 ppp0 localhost * 255.255.255.0 U 0 00 eth0 loopback* 255.0.0.0 U 0 00 lo default dslb-088-067-01 0.0.0.0 UG0 00 ppp0 Looking at this, I wouldn't even expect it to work at all, since the only route via eth0 is for localhost. But since you can connect between router and desktop, I think you borked your /etc/hosts. localhost clearly doesn't seem to be assigned to 127.0.0.1. So fix your hostnames! This here: /etc/hosts 127.0.0.1 localhost 192.168.0.1 gentoo-vdr.linux gentoo-vdr 192.168.0.2 gentoo.linux gentoo ::1 localhost just can't be true if the routes above are the complete routes and you can connect to your desktop from the router. Another option than /etc/hosts may be a seriously broken dnsmasq config. For those who are not familiar with shorewall here are the generated iptables on the router. iptables -L -t filter Chain FORWARD (policy DROP) target prot opt source destination Empty FORWARD chain and policy DROP means everything not going to the router itself is gonna be dropped. Note that you made yourself a hard time since there's DROP and REJECT (built-in targets) and you also reference Drop, drop, Reject and reject targets. I never used shorewall, but if that naming is from them, they are clearly freaks. -hwh -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface dslb-088-067-01 * 255.255.255.255 UH0 00 ppp0 localhost * 255.255.255.0 U 0 00 eth0 loopback* 255.0.0.0 U 0 00 lo default dslb-088-067-01 0.0.0.0 UG0 00 ppp0 Looking at this, I wouldn't even expect it to work at all, since the only route via eth0 is for localhost. But since you can connect between router and desktop, I think you borked your /etc/hosts. localhost clearly doesn't seem to be assigned to 127.0.0.1. So fix your hostnames! This here: /etc/hosts 127.0.0.1 localhost 192.168.0.1 gentoo-vdr.linux gentoo-vdr 192.168.0.2 gentoo.linux gentoo ::1 localhost I think localhost is assigned to 127.0.0.1, or did i misunderstood something? just can't be true if the routes above are the complete routes and you can connect to your desktop from the router. I can connect from router to desktop and back ping and ssh are working, i can connect to the internet from the router, but i couldn't do this from the desktop Another option than /etc/hosts may be a seriously broken dnsmasq config. I will post the config when i am back. For those who are not familiar with shorewall here are the generated iptables on the router. iptables -L -t filter Chain FORWARD (policy DROP) target prot opt source destination Empty FORWARD chain and policy DROP means everything not going to the router itself is gonna be dropped. Note that you made yourself a hard time since there's DROP and REJECT (built-in targets) and you also reference Drop, drop, Reject and reject targets. I never used shorewall, but if that naming is from them, they are clearly freaks. the whole iptables config is generated by shorewall, i recognised this different namings too. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
Hi, On Mon, 15 Jan 2007 11:45:13 +0100 Daniel Pielmeier [EMAIL PROTECTED] wrote: This here: /etc/hosts 127.0.0.1 localhost 192.168.0.1 gentoo-vdr.linux gentoo-vdr 192.168.0.2 gentoo.linux gentoo ::1 localhost I think localhost is assigned to 127.0.0.1, or did i misunderstood something? No, that's (usually) correct. But in the route excerpt you've cited above (please post route -n next time!) the route for localhost was set to dev eth0. Also, the subnet was a /24 one, instead of the usual /8 for localhost. So there's some inconsistency between that file and the routes. The /etc/hosts you've shown looks good, please post dnsmasq's config. the whole iptables config is generated by shorewall, i recognised this different namings too. Hm, OK, you're sure the tables were empty and Gentoo's iptables save feature doesn't somehow get in your way? But anyway, the NAT/forwarding can't work for the reason I mentioned (empty FORWARD chain and DROP policy). -hwh -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
I think localhost is assigned to 127.0.0.1, or did i misunderstood something? No, that's (usually) correct. But in the route excerpt you've cited above (please post route -n next time!) the route for localhost was set to dev eth0. Also, the subnet was a /24 one, instead of the usual /8 for localhost. So there's some inconsistency between that file and the routes. The /etc/hosts you've shown looks good, please post dnsmasq's config. I will do that in the evening the whole iptables config is generated by shorewall, i recognised this different namings too. Hm, OK, you're sure the tables were empty and Gentoo's iptables save feature doesn't somehow get in your way? But anyway, the NAT/forwarding can't work for the reason I mentioned (empty FORWARD chain and DROP policy). Yes i think they were empty, when i stop shorewall iptables -L just gives me empty tables. Also i never used iptables directly. -- gentoo-user@gentoo.org mailing list
RE: [gentoo-user] Problem with kernel 2.6.18-r6
-Original Message- From: Iván Pérez Domínguez [mailto:[EMAIL PROTECTED] Sent: 14 January 2007 23:28 To: gentoo-user@lists.gentoo.org Subject: [gentoo-user] Problem with kernel 2.6.18-r6 Hi there. I'm having a problem with kernel 2.6.18-r6. My laptop hangs during boot, right after detecting the mouse and the keyboard. it doesn't matter whether I enable initrd or not, dies anyway. No kernel panic, no oops messages, it simply freezes. The funny thing is that sometimes it keeps running a little more (detects the hard disk, sometimes even the dvd drive), and 1 in 100 times, everything works fine and it boots normally. I'm currently running kernel 2.6.13 and everything works fine (despite the things that need 2.6.13 to work). I attach my kernel config, maybe someone knows what I'm doing wrong. Cheers, Ivan Can you check dmesg from when it manages to boot? Not sure, but there may be some clues in there. David Note: These views are my own, advice is provided with no guarantee of success. I do not represent anyone else in any emails I send to this list. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] USE flags and configure-time problems
On Sunday 14 January 2007 20:10, Iván Pérez Domínguez wrote: I understand why this happend, and I know how to solve it. My point is: should the RDEPEND and DEPEND syntax in ebuilds be changed so that this kind of problems can be detected before emerging? https://bugs.gentoo.org/show_bug.cgi?id=2272 USE deps have been discussed many times on the gentoo-dev@ mailing list so search the archives if you want to know more about it. The syntax has been agreed on (cate-gory/pkg:use) but it still hasn't been implemented in portage. AFAIK zmedico plans to implement it in portage-2.1.3 when 2.1.2 has been stabilized. Even after it has been implemented it won't be possible to use it in the tree without an EAPI bump. This is to avoid people who haven't yet upgraded portage from getting weird problems because it doesn't understand the syntax... Before the EAPI can be bumped to a newer version, the current version needs to be defined. spb is working on that now but it still needs to be agreed on... -- Bo Andresen pgpbXN4PfndLx.pgp Description: PGP signature
Re: [gentoo-user] USE flags and configure-time problems
On Monday 15 January 2007 13:12, Bo Ørsted Andresen wrote: The syntax has been agreed on (cate-gory/pkg:use) Bugger! That's for slot deps (cate-gory/pkg:slot). I meant cate-gory/pkg[use]... At least I think they agreed... -- Bo Andresen pgpi2uStOgtlb.pgp Description: PGP signature
Re: [gentoo-user] Telling emerge to continue when something goes wrong
On Monday 15 January 2007 02:36, Boyd Stephen Smith Jr. wrote: I've been taking a look at the script. I wonder why using emerge --sync at the beginning and update-eix at the end instead of an eix-sync. I want the information returned by eix after the script completes to take into account the package updates that may occur during the portage or world updates. I also want those updates to take into account the most recent portage tree. So, I need a sync operation before the updates and a eix-update after them. Thus, I can't combine the two operations into a single eix-sync. Hmm.. maybe you think eix behaves like esearch. eix always looks in the vdb so whether you run update-eix before or after an upgrade is irrelevant.. -- Bo Andresen pgpPW87EFDrDZ.pgp Description: PGP signature
Re: [gentoo-user] Telling emerge to continue when something goes wrong
On Monday 15 January 2007 06:34, Bo Ørsted Andresen [EMAIL PROTECTED] wrote about 'Re: [gentoo-user] Telling emerge to continue when something goes wrong': Hmm.. maybe you think eix behaves like esearch. eix always looks in the vdb so whether you run update-eix before or after an upgrade is irrelevant.. I've confused myself more than once because eix lied to me. This does seem to be fixed in my current version, so I may update my script. Thanks for the pointer. -- If there's one thing we've established over the years, it's that the vast majority of our users don't have the slightest clue what's best for them in terms of package stability. -- Gentoo Developer Ciaran McCreesh pgppnumuNQ2VR.pgp Description: PGP signature
Re: [gentoo-user] Telling emerge to continue when something goes wrong
On Monday 15 January 2007 13:56, Boyd Stephen Smith Jr. wrote: Hmm.. maybe you think eix behaves like esearch. eix always looks in the vdb so whether you run update-eix before or after an upgrade is irrelevant.. I've confused myself more than once because eix lied to me. This does seem to be fixed in my current version, so I may update my script. Thanks for the pointer. I see. I've never experienced that but either way eix-sync isn't just a sync and an update-eix. It runs diff-eix and might run update-eix before the sync. If you don't care about diff-eix using eix-sync hence isn't exactly an optimization. So it's not like there's any actual drawback to running update-eix last. ;) -- Bo Andresen pgpDXoJSrTOoj.pgp Description: PGP signature
[gentoo-user] Looking for a minimalist image viewer / organizer
Hello, Browsing getoo-wiki.com for an image viewer, I only found Gthumb, which depends on GNOME. I use Fluxbox because I have an older computer and would like to keep dependencies at a minimum. Any suggestions? I only need a viewer; organising my pictures is not a plus. No exotic formats, just jpeg, gif and the usual. Thanks in advance, Vlad
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
You can try the Linux version of Google Picasa http://picasa.google.com/linux/ May not be as minimal as you would like but it works. And they are not listing an dependencies. On 1/15/07, Vlad Dogaru [EMAIL PROTECTED] wrote: Hello, Browsing getoo-wiki.com for an image viewer, I only found Gthumb, which depends on GNOME. I use Fluxbox because I have an older computer and would like to keep dependencies at a minimum. Any suggestions? I only need a viewer; organising my pictures is not a plus. No exotic formats, just jpeg, gif and the usual. Thanks in advance, Vlad -- Ryan Crisman
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
Browsing getoo-wiki.com for an image viewer, I only found Gthumb, which depends on GNOME. I use Fluxbox because I have an older computer and would like to keep dependencies at a minimum. Any suggestions? I only need a viewer; organising my pictures is not a plus. No exotic formats, just jpeg, gif and the usual. give xnview a try it has not that much dependencies, just X and a few other. i think this is because it is a binary package. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
On Mon, 15 Jan 2007 07:16:02 -0600, Vlad Dogaru [EMAIL PROTECTED] wrote: Hello, Browsing getoo-wiki.com for an image viewer, I only found Gthumb, which depends on GNOME. I use Fluxbox because I have an older computer and would like to keep dependencies at a minimum. Any suggestions? I only need a viewer; organising my pictures is not a plus. No exotic formats, just jpeg, gif and the usual. Thanks in advance, Vlad Try http://gentoo-portage.com/Search?search=image+viewer theres a lot more than just one ... -- There is no god but yourself... amen ... -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
On Mon, 2007-01-15 at 15:16 +0200, Vlad Dogaru wrote: Hello, Browsing getoo-wiki.com for an image viewer, I only found Gthumb, which depends on GNOME. I use Fluxbox because I have an older computer and would like to keep dependencies at a minimum. Any suggestions? I only need a viewer; organising my pictures is not a plus. No exotic formats, just jpeg, gif and the usual. media-gfx/gqview is a good image viewer/manipulator and only requires GTK. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
On 1/16/07, Vlad Dogaru [EMAIL PROTECTED] wrote: Hello, Browsing getoo-wiki.com for an image viewer, I only found Gthumb, which depends on GNOME. I use Fluxbox because I have an older computer and would like to keep dependencies at a minimum. Any suggestions? I only need a viewer; organising my pictures is not a plus. No exotic formats, just jpeg, gif and the usual. Thanks in advance, Vlad Tools i usually rely on are * feh : uses imlib ( brags to be the fastest ) , very lightweight in use, but an insane collection of features if you read the man pages to see the extra tricks it can perform * gliv :uses opengl and gtk , making it awesome for viewing some of those larger images using the fast and quality scaling algos of your GPU *fbi : ( media-gfx/fbida) which is great for viewing images when you cant be bothered cracking open X * anytopnm + aview : for days your feeling geeky and need to display images in a textual representation ( black and white ) * cacaview : for days you want to demostrate how much free time geeks have and nothing else feels like working cos your stuck on a windows box with PUTTY. - Kent -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] usb scanner HP2200c
On Sun, 14 Jan 2007 20:11:46 + Neil Bothwick [EMAIL PROTECTED] wrote: On Sun, 14 Jan 2007 10:04:14 -0600, Dan wrote: here's the output from the system log, i use metalog so that's /var/log/everything/current. Jan 14 10:02:02 [kernel] usb 2-1: USB disconnect, address 2 Jan 14 10:02:08 [kernel] ohci_hcd :00:02.0: wakeup Jan 14 10:02:08 [kernel] usb 2-4: new full speed USB device using ohci_hcd and address 3 Jan 14 10:02:09 [kernel] usb 2-4: configuration #1 chosen from 1 choice dmesg: usb 2-1: USB disconnect, address 2 ohci_hcd :00:02.0: wakeup usb 2-4: new full speed USB device using ohci_hcd and address 3 usb 2-4: configuration #1 chosen from 1 choice That's it? There would normally be several lines after that showing the device's identification. perhaps in another log somewhere, but i use the niash drivers and they don't have configuration options, they might be a little quieter than yours. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Kent Fredric wrote: * cacaview : for days you want to demostrate how much free time geeks have and nothing else feels like working cos your stuck on a windows box with PUTTY. Those sexy ascii boobs... :P Anyway, off-the-record, caca is the Argentinian (and latin-american, probably) jargon word for... well, sh*t.. :) - -- Arturo Buanzo Busleiman - Consultor Independiente en Seguridad Informatica ¿No sabés a dónde ir a comer o tomar algo? Visitá www.vivamoslavida.com.ar -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFq6GdAlpOsGhXcE0RAqMyAJ0UFJFdP1rrh/tmKfmXMCm/OA1MCACfaPUB 62MYY1rYCfDQ+IMF1iiim+U= =FxhS -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] can no longer switch to a VT - OT
At Mon, 15 Jan 2007 09:42:32 +0100 Gabriel Rossetti [EMAIL PROTECTED] wrote: Thank you for your replay Benno, I was not aware that Top-posting was a bad thing, since you can read the last msg first, which is to me better since I don't want to have to re-read/skip the whole history to read the last post. This point has merit when it is a personal conversation between two people. Although I still bottom reply in those cases (or inline reply as you would say), I can see why top replying is not so bad. However, for mailing lists where there are many readers, a number of whom have not been actively following the thread, bottom posting is annoying. Also I save some message from this group as reference to be read much later if I encounter a similar problem. Then bottom-posting is considerably better. thanks, allan -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
On 15/01/07, Arturo 'Buanzo' Busleiman [EMAIL PROTECTED] wrote: * cacaview : for days you want to demostrate how much free time geeks have and nothing else feels like working cos your stuck on a windows box with PUTTY. Those sexy ascii boobs... :P Anyway, off-the-record, caca is the Argentinian (and latin-american, probably) jargon word for... well, sh*t.. :) Andf now you know how pictures look when viewed with it. Have you ever tried cacaview? Dotan Cohen http://what-is-what.com/what_is/phishing.html http://lyricslist.com/lyrics/artist_albums/565/58.html -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
On 1/16/07, Arturo 'Buanzo' Busleiman [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Kent Fredric wrote: * cacaview : for days you want to demostrate how much free time geeks have and nothing else feels like working cos your stuck on a windows box with PUTTY. Those sexy ascii boobs... :P Anyway, off-the-record, caca is the Argentinian (and latin-american, probably) jargon word for... well, sh*t.. :) Lol. Thats about what most of the results look like, but its ok if your desperate and need a general idea of what the image looks like, and besides, it has zooom. And you've not lived until you've watched a small video (cough cough) over a PUTTY terminal over long distance using mplayer -vo caca. ;) Look at the big pink blocks move!. -- Kent -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
Send the output from iptables-save, please. Otherwise we could only guess if the problem is with your firewall rules or somewhere else. Here we go! # Generated by iptables-save v1.3.5 on Mon Jan 15 19:09:43 2007 *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] :tcfor - [0:0] :tcout - [0:0] :tcpost - [0:0] :tcpre - [0:0] -A PREROUTING -j tcpre -A FORWARD -j tcfor -A OUTPUT -j tcout -A POSTROUTING -j tcpost COMMIT # Completed on Mon Jan 15 19:09:43 2007 # Generated by iptables-save v1.3.5 on Mon Jan 15 19:09:43 2007 *nat :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :ppp0_masq - [0:0] -A POSTROUTING -o ppp0 -j ppp0_masq -A ppp0_masq -s 192.168.0.0/255.255.255.0 -m policy --dir out --pol none -j MASQUERADE COMMIT # Completed on Mon Jan 15 19:09:43 2007 # Generated by iptables-save v1.3.5 on Mon Jan 15 19:09:43 2007 *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT DROP [0:0] :Drop - [0:0] :Reject - [0:0] :all2all - [0:0] :dropBcast - [0:0] :dropInvalid - [0:0] :dropNotSyn - [0:0] :dynamic - [0:0] :eth0_fwd - [0:0] :eth0_in - [0:0] :fw2all - [0:0] :fw2loc - [0:0] :fw2net - [0:0] :loc2all - [0:0] :loc2fw - [0:0] :loc2net - [0:0] :loc_frwd - [0:0] :logflags - [0:0] :net2all - [0:0] :net2fw - [0:0] :net2loc - [0:0] :net_frwd - [0:0] :norfc1918 - [0:0] :ppp0_fwd - [0:0] :ppp0_in - [0:0] :reject - [0:0] :rfc1918 - [0:0] :shorewall - [0:0] :smurfs - [0:0] :tcpflags - [0:0] -A INPUT -i lo -j ACCEPT -A INPUT -i ppp0 -j ppp0_in -A INPUT -i eth0 -j eth0_in -A INPUT -j Reject -A INPUT -j LOG --log-prefix Shorewall:INPUT:REJECT: --log-level 6 -A INPUT -j reject -A FORWARD -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu -A FORWARD -i ppp0 -j ppp0_fwd -A FORWARD -i eth0 -j eth0_fwd -A FORWARD -j Reject -A FORWARD -j LOG --log-prefix Shorewall:FORWARD:REJECT: --log-level 6 -A FORWARD -j reject -A OUTPUT -o lo -j ACCEPT -A OUTPUT -o ppp0 -m policy --dir out --pol ipsec -j fw2net -A OUTPUT -d 192.168.0.0/255.255.255.0 -o eth0 -m policy --dir out --pol ipsec -j fw2loc -A OUTPUT -d 255.255.255.255 -o eth0 -j fw2loc -A OUTPUT -d 224.0.0.0/240.0.0.0 -o eth0 -j fw2loc -A OUTPUT -j Reject -A OUTPUT -j LOG --log-prefix Shorewall:OUTPUT:REJECT: --log-level 6 -A OUTPUT -j reject -A Drop -p tcp -m tcp --dport 113 -j reject -A Drop -j dropBcast -A Drop -p icmp -m icmp --icmp-type 3/4 -j ACCEPT -A Drop -p icmp -m icmp --icmp-type 11 -j ACCEPT -A Drop -j dropInvalid -A Drop -p udp -m multiport --dports 135,445 -j DROP -A Drop -p udp -m udp --dport 137:139 -j DROP -A Drop -p udp -m udp --sport 137 --dport 1024:65535 -j DROP -A Drop -p tcp -m multiport --dports 135,139,445 -j DROP -A Drop -p udp -m udp --dport 1900 -j DROP -A Drop -p tcp -j dropNotSyn -A Drop -p udp -m udp --sport 53 -j DROP -A Reject -p tcp -m tcp --dport 113 -j reject -A Reject -j dropBcast -A Reject -p icmp -m icmp --icmp-type 3/4 -j ACCEPT -A Reject -p icmp -m icmp --icmp-type 11 -j ACCEPT -A Reject -j dropInvalid -A Reject -p udp -m multiport --dports 135,445 -j reject -A Reject -p udp -m udp --dport 137:139 -j reject -A Reject -p udp -m udp --sport 137 --dport 1024:65535 -j reject -A Reject -p tcp -m multiport --dports 135,139,445 -j reject -A Reject -p udp -m udp --dport 1900 -j DROP -A Reject -p tcp -j dropNotSyn -A Reject -p udp -m udp --sport 53 -j DROP -A all2all -m state --state RELATED,ESTABLISHED -j ACCEPT -A all2all -j Reject -A all2all -j LOG --log-prefix Shorewall:all2all:REJECT: --log-level 6 -A all2all -j reject -A dropBcast -m pkttype --pkt-type broadcast -j DROP -A dropBcast -m pkttype --pkt-type multicast -j DROP -A dropInvalid -m state --state INVALID -j DROP -A dropNotSyn -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -j DROP -A eth0_fwd -m state --state INVALID,NEW -j dynamic -A eth0_fwd -p tcp -m policy --dir in --pol none -j tcpflags -A eth0_fwd -s 192.168.0.0/255.255.255.0 -m policy --dir in --pol ipsec -j loc_frwd -A eth0_in -m state --state INVALID,NEW -j dynamic -A eth0_in -p tcp -m policy --dir in --pol none -j tcpflags -A eth0_in -s 192.168.0.0/255.255.255.0 -m policy --dir in --pol ipsec -j loc2fw -A fw2all -m state --state RELATED,ESTABLISHED -j ACCEPT -A fw2all -j Reject -A fw2all -j LOG --log-prefix Shorewall:fw2all:REJECT: --log-level 6 -A fw2all -j reject -A fw2loc -m state --state RELATED,ESTABLISHED -j ACCEPT -A fw2loc -p tcp -m tcp --dport 22 -j ACCEPT -A fw2loc -j Reject -A fw2loc -j LOG --log-prefix Shorewall:fw2loc:REJECT: --log-level 6 -A fw2loc -j reject -A fw2net -m state --state RELATED,ESTABLISHED -j ACCEPT -A fw2net -j ACCEPT -A loc2all -m state --state RELATED,ESTABLISHED -j ACCEPT -A loc2all -j Reject -A loc2all -j LOG --log-prefix Shorewall:loc2all:REJECT: --log-level 6 -A loc2all -j reject -A loc2fw -m state --state RELATED,ESTABLISHED -j ACCEPT -A loc2fw -p tcp -m tcp --dport 22 -j ACCEPT -A loc2fw -p udp -m udp --dport 123 -j ACCEPT -A loc2fw -j Reject -A loc2fw -j LOG --log-prefix
Re: [gentoo-user] Setting up a home router
I think localhost is assigned to 127.0.0.1, or did i misunderstood something? No, that's (usually) correct. But in the route excerpt you've cited above (please post route -n next time!) the route for localhost was set to dev eth0. Also, the subnet was a /24 one, instead of the usual /8 for localhost. So there's some inconsistency between that file and the routes. The /etc/hosts you've shown looks good, please post dnsmasq's config. Here are the files you have requested! route -n on desktop Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 192.168.0.0 0.0.0.0 255.255.255.0 U 0 00 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 00 lo 0.0.0.0 192.168.0.1 0.0.0.0 UG0 00 eth0 route -n on router Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 88.67.16.1 0.0.0.0 255.255.255.255 UH0 00 ppp0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 00 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 00 lo 0.0.0.0 88.67.16.1 0.0.0.0 UG0 00 ppp0 dnsmasq.conf on router # Configuration file for dnsmasq. # # Format is one option per line, legal options are the same # as the long options legal on the command line. See # /usr/sbin/dnsmasq --help or man 8 dnsmasq for details. # The following two options make you a better netizen, since they # tell dnsmasq to filter out queries which the public DNS cannot # answer, and which load the servers (especially the root servers) # uneccessarily. If you have a dial-on-demand link they also stop # these requests from bringing up the link uneccessarily. # Never forward plain names (without a dot or domain part) domain-needed # Never forward addresses in the non-routed address spaces. bogus-priv # Uncomment this to filter useless windows-originated DNS requests # which can trigger dial-on-demand links needlessly. # Note that (amongst other things) this blocks all SRV requests, # so don't use it if you use eg Kerberos. # This option only affects forwarding, SRV records originating for # dnsmasq (via srv-host= lines) are not suppressed by it. #filterwin2k # Change this line if you want dns to get its upstream servers from # somewhere other that /etc/resolv.conf #resolv-file= # By default, dnsmasq will send queries to any of the upstream # servers it knows about and tries to favour servers to are known # to be up. Uncommenting this forces dnsmasq to try each query # with each server strictly in the order they appear in # /etc/resolv.conf #strict-order # If you don't want dnsmasq to read /etc/resolv.conf or any other # file, getting its servers from this file instead (see below), then # uncomment this #no-resolv # If you don't want dnsmasq to poll /etc/resolv.conf or other resolv # files for changes and re-read them then uncomment this. #no-poll # Add other name servers here, with domain specs if they are for # non-public domains. #server=/localnet/192.168.0.1 # Add local-only domains here, queries in these domains are answered # from /etc/hosts or DHCP only. #local=/localnet/ # Add domains which you want to force to an IP address here. # The example below send any host in doubleclick.net to a local # webserver. #address=/doubleclick.net/127.0.0.1 # If you want dnsmasq to change uid and gid to something other # than the default, edit the following lines. #user= #group= # If you want dnsmasq to listen for DHCP and DNS requests only on # specified interfaces (and the loopback) give the name of the # interface (eg eth0) here. # Repeat the line for more than one interface. interface=eth0 # Or you can specify which interface _not_ to listen on #except-interface= # Or which to listen on by address (remember to include 127.0.0.1 if # you use this.) #listen-address= # If you want dnsmasq to provide only DNS service on an interface, # configure it as shown above, and then use the following line to # disable DHCP on it. #no-dhcp-interface= # On systems which support it, dnsmasq binds the wildcard address, # even when it is listening on only some interfaces. It then discards # requests that it shouldn't reply to. This has the advantage of # working even when interfaces come and go and change address. If you # want dnsmasq to really bind only the interfaces it is listening on, # uncomment this option. About the only time you may need this is when # running another nameserver on the same machine. #bind-interfaces # If you don't want dnsmasq to read /etc/hosts, uncomment the # following line. #no-hosts # or if you want it to read another file, as well as /etc/hosts, use # this. #addn-hosts=/etc/banner_add_hosts # Set this (and domain: see below) if you want to have a domain # automatically added to simple names in a hosts-file. #expand-hosts # Set the
[gentoo-user] Re: [Xen] How to set or bring up vif interfaces?
I would like to have Xen to run unmodified OS (Windows, and some other Linuces). I know Linux may be ran Xen-aware, but the goal is to experiment some kernel packaging, so that I need to use the distribution kernel. I got the FC5 isos. I made a file /etc/xen/fc5-guest.cfg (see attached) But the problem is about vifX interfaces. Neither http://fr.gentoo-wiki.com/HOWTO_XEN#Windows_XP nor http://gentoo-wiki.com/HOWTO_Xen_and_Gentoo tells how to bring up such interface. In fact I dont see anywhere any documentation on how to setup networking for the need of Xen. Actually, you just have to start xend, and it will setup xenbr0. But i prefer, to setup xenbr0 manually, by myself. And that's the way i do it, in /etc/conf.d/net: bridge_xenbr0=eth0 config_xenbr0=( a.b.c.d/24 ) routes_xenbr0=( default via a.b.c.d ) brctl_xenbr0=( setfd 0 sethello 0 stp off ) When I run Xen, I have: asus ~ # xm create fc5-guest.cfg Using config file /etc/xen/fc5-guest.cfg. VNC= 3 Error: Device 0 (vif) could not be connected. Hotplug scripts not working. bridge-utils is already emerged. vnc is also emerged with USE=server What didi I do wrong? Do you have the necessary backend-driver in your dom0 kernel? Please check CONFIG_XEN_NETDEV_BACKEND. kernel = /usr/lib64/xen/boot/hvmloader builder='hvm' memory = 512 name = fc5-guest vcpus=1 vif = [ 'bridge=xenbr0' ] disk = ['phy:/dev/sda5,ioemu:hda,w','file:/home/mihamina/downloads/isos/FC-5-i386-disc1.iso,hdc:cdrom,r'] device_model ='/usr/lib64/xen/bin/qemu-dm' boot='d' vnc=1 vncviewer=1 serial='pty' ne2000=0 In my config, it reads: vif = [ 'bridge=xenbr0' ] So yes, your config should work. Greetings, Sven signature.asc Description: OpenPGP digital signature
Re: [gentoo-user] Setting up a home router
Another thing that makes me wonder is that the home router guide did nothing mention about name_servers or gateways. According to the guide this line seems to be enough: config_eth0=( 192.168.0.2 broadcast 192.168.0.255 netmask 255.255.255.0 ) But without the routes setting i get network unreachable when i try to ping: routes_eth0=(default via 192.168.0.1) and without the dns_servers setting the ip adresses are not resolved: dns_servers_eth0=(192.168.0.1 ) I have also seen the gateways setting on my searches, what is the right one routes or gateway or what is the difference. gateways_eth0=192.168.0.1 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] USE flags and configure-time problems
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Iván Pérez Domínguez wrote: Hi there. I just happend to emerge evince and, after half an hour got the following error: 18:07:32 (44.99 KB/s) - `/usr/portage/distfiles/evince-0.6.1.tar.bz2' saved [1212271/1212271] * checking ebuild checksums ;-) ... [ ok ] * checking auxfile checksums ;-) ... [ ok ] * checking miscfile checksums ;-) ... [ ok ] * checking evince-0.6.1.tar.bz2 ;-) ... [ ok ] * Please re-emerge app-text/poppler-bindings with the gtk USE flag set !!! ERROR: app-text/evince-0.6.1 failed. Call stack: ebuild.sh, line 1626: Called dyn_setup ebuild.sh, line 701: Called qa_call 'pkg_setup' ebuild.sh, line 38: Called pkg_setup evince-0.6.1.ebuild, line 67: Called die !!! poppler-bindings needs gtk flag set !!! If you need support, post the topmost build error, and the call stack if relevant. I understand why this happend, and I know how to solve it. My point is: should the RDEPEND and DEPEND syntax in ebuilds be changed so that this kind of problems can be detected before emerging? Here's an example. Imagine program A depends on B, and if A is built with use flag dvi, then it depends on C to be built with use flag dvi2. The following could be A's DEPEND: DEPEND=dvi? ([dvi2 C]) B This is just an example, and I'm sure there's a different syntax that could be more appropriate. What do you this of it? Is there any ongoing implementation to solve it in a different way? Cheers, Ivan. Ivan, from my personal experience I find your advice to be highly important. It would be beneficial to everyone if we knew the dependencies before emerging from portage.I highly suggest sending a message on gentoo-dev@gentoo.org (confirm this). I really do support this. Best regards. Avaricen -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFq9oFQHQy/61tbpYRAiKGAJ4n+wmarim7SjQpG3PWEZaQXkUwAgCfZLz6 8Iig49rBTs/aCnbJpMGYXJ8= =zOBE -END PGP SIGNATURE- -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
On 1/15/07, Michal 'vorner' Vaner [EMAIL PROTECTED] wrote: On Mon, Jan 15, 2007 at 03:16:02PM +0200, Vlad Dogaru wrote: Hello, Browsing getoo-wiki.com for an image viewer, I only found Gthumb, which depends on GNOME. I use Fluxbox because I have an older computer and would like to keep dependencies at a minimum. Any suggestions? I only need a viewer; organising my pictures is not a plus. No exotic formats, just jpeg, gif and the usual. How much minimalistic? xload image? Or gqview? (the second depends on gtk, if I remember correctly) Hi Michal, Thanks for suggesting gqview; I used it briefly when I had GNOME and liked it, but forgot about it meanwhile. GTK is one of the few toolkits I can live with (actually, the only), since I have this organic need for Gaim ;) Cheers, Vlad
[gentoo-user] logrotate won't rotate portage logs
Hi All, I do not understand why the log files within /var/log/portage/ will not rotate on my PC, while they rotate fine on my laptop. The /etc/logrotate.conf is the same on both boxen: == # rotate log files weekly weekly #daily # keep 4 weeks worth of backlogs rotate 4 # create new (empty) log files after rotating old ones create # uncomment this if you want your log files compressed compress # packages can drop log rotation information into this directory include /etc/logrotate.d notifempty nomail noolddir [snip . . . ] # when /var/log/portage gets big /var/log/portage/*.log { rotate 1 weekly nocreate ifempty olddir /var/log/portage/old postrotate find /var/log/portage/old -maxdepth 1 -mtime +30 -exec /bin/rm -f {} \; endscript nocompress } == The only difference I noticed (other than the fact that I have two year old portage log files in /var/log/portage) between the two boxen is that the access rights of the 'old' directory on the PC were: drwxr-sr-x 2 rootroot 48 Dec 23 2005 old while on the laptop which rotates without problems are: drwx-- 2 rootroot 4256 Jan 13 11:20 old This may be a bit of a red herring because even though I changed the access rights as per the laptop, the PC still refuses to rotate the portage log files. Any ideas? How do I troubleshoot this one? -- Regards, Mick -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Improvement Request for Install CD
Hi Neil, Neil Bothwick schrieb: File a request at http://bugs.gentoo.org a thx is commited. Bye Matthias -- Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the universe trying to produce bigger and better idiots. So far, the universe is winning. -- Rich Cook -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
On 1/16/07, b.n. [EMAIL PROTECTED] wrote: why not use imagemagick's display command? I believe that has an ugly menu which seems to think you want to edit the photo -- Kent -- gentoo-user@gentoo.org mailing list
[gentoo-user] Re: 3D games on AMD64 + ati 1900
Martins mar at ml.lv writes: yes /usr/games/bin/bzflag # ./fglrxinfo display: :0.0 screen: 0 OpenGL vendor string: ATI Technologies Inc. OpenGL renderer string: RADEON 9600 Generic OpenGL version string: 2.0.6234 (8.32.5) Hello Martins, I got glxgears running fine now (just under 2000 fps on aa full screen (grin) And bzflag stated up and ran with the mouse! (hurray). but, I wanted to get the Logitech Extreme 3D on this amd64 system with bzflag, like in does on the intel laptop (radeon 7500). So I found some joystick option for xorg-server, but could not set the joystick parameter for compiling via the file: /etc/portage/package.use. I has to set it in the /etc/make.conf as: INPUT_DEVICES=keyboard mouse joystick then I issued these commands: emerge xorg-x11 emerge xorg-server emerge ati-drivers modprobe fglrx eselect opengl set ati modules-update and bzflag starts up, but it did not fix make the joystick work. The kernel is configured just like the intel laptop as far as usb and input devices are concerned. Futthermore, not niether the 'i' button or a right click of the mouse will allow the bzflag play to commence. Any ideas? James -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] can no longer switch to a VT - OT
Gabriel Rossetti wrote: Benno Schulenberg wrote: First: stop top-posting. I was not aware that Top-posting was a bad thing, since you can read the last msg first, Sure, but then you have to spaghetti first down, then up, then maybe down again to read closer, up again... Do you want to make people crazy? :) which is to me better since I don't want to have to re-read/skip the whole history to read the last post. There's no need to skip the whole history when the person whose post you're reading has snipped well: only the relevant stuff is there. I do assume that you prefer Bottom-Posting, from your reply's position. Is Inline-posting acceptable too? Inline-posting is what's needed. Just quoting the whole previous post and then adding your answer at the bottom is no good either: first snip everything that you're not reacting to. Glad that the re-emerging worked, though. Benno -- Cetere mi opinias ke ne ĉio tradukenda estas. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] How can I emerge a program with debugging options?
qfpvajdy wrote: I would like to emerge a program with debugging options CFLAGS=-g and without strip at the end of the build. You could define an alias. # type dbgemerge dbgemerge is aliased to `USE='debug' FEATURES='nostrip -test' CFLAGS='-ggdb -O1 -pipe' CXXFLAGS='-ggdb -O1 -pipe' LDFLAGS='-ggdb -nopie' emerge --oneshot' Benno -- Cetere mi opinias ke ne ĉio tradukenda estas. -- gentoo-user@gentoo.org mailing list
[gentoo-user] Exclude package from emerge world ?
Hello. I am trying to emerge -uD world and getting an error on app-emulation/wine-20050930 (error stack is below, if YOU can decipher it;). wine- builds fine, but emerge world insists on building 20050930, and I am not too sure why ? Probably some other package depends on 20050930, but how can I check this ? (I might afford to unmerge this package, and do do without it for the moment ...) Or can I command emerge world to exclude wine ? Thanks for attention. * bison -d -t ./parser.y -o parser.tab.c ./parser.y:303.8-14: warning: symbol tSTRING redeclared ./parser.y:303.16-21: warning: symbol tIDENT redeclared ./parser.y:303.23-30: warning: symbol tRAWDATA redeclared ./parser.y: conflicts: 5 shift/reduce i686-pc-linux-gnu-gcc -c -I. -I. -I../../include -I../../include -DINCLUDEDIR=\/usr/include/wine\ -Wall -pipe -mpreferred-stack-boundary=2 -fno-strict-aliasing -gstabs+ -Wdeclaration-after-statement -Wpointer-arith -O2 -march=i686 -pipe -o parser.tab.o parser.tab.c flex -Cf -d -8 ./parser.l i686-pc-linux-gnu-gcc -c -I. -I. -I../../include -I../../include -DINCLUDEDIR=\/usr/include/wine\ -Wall -pipe -mpreferred-stack-boundary=2 -fno-strict-aliasing -gstabs+ -Wdeclaration-after-statement -Wpointer-arith -O2 -march=i686 -pipe -o lex.yy.o lex.yy.c lex.yy.c:9174: error: syntax error before numeric constant lex.yy.c: In function `yy_scan_string': lex.yy.c:9175: error: number of arguments doesn't match prototype lex.yy.c:367: error: prototype declaration lex.yy.c:9177: warning: passing arg 1 of `strlen' makes pointer from integer without a cast lex.yy.c:9177: warning: passing arg 1 of `yy_scan_bytes' makes pointer from integer without a cast ./parser.l: At top level: lex.yy.c:8687: warning: 'yyunput' defined but not used lex.yy.c:9266: warning: 'yy_top_state' defined but not used make[2]: *** [lex.yy.o] Error 1 make[2]: Leaving directory `/var/tmp/portage/wine-20050930/work/wine-20050930/tools/wrc' make[1]: *** [wrc] Error 2 make[1]: Leaving directory `/var/tmp/portage/wine-20050930/work/wine-20050930/tools' make: *** [tools] Error 2 !!! ERROR: app-emulation/wine-20050930 failed. Call stack: ebuild.sh, line 1546: Called dyn_compile ebuild.sh, line 937: Called src_compile wine-20050930.ebuild, line 132: Called die
Re: [gentoo-user] Exclude package from emerge world ?
On Mon, 2007-01-15 at 22:02 +, Jean-Baptiste Mestelan wrote: Probably some other package depends on 20050930, but how can I check this ? You can check to see what package is pulling in wine using the --tree command, such as # emerge --update --deep --tree world -pv Randy Barlow http://www.electronsweatshop.com The most remarkable thing about my mother is that for thirty years she served the family nothing but leftovers. The original meal has never been found. -- Calvin Trillin -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Looking for a minimalist image viewer / organizer
On 1/15/07, Kent Fredric [EMAIL PROTECTED] wrote: On 1/16/07, Vlad Dogaru [EMAIL PROTECTED] wrote: Hello, Browsing getoo-wiki.com for an image viewer, I only found Gthumb, which depends on GNOME. I use Fluxbox because I have an older computer and would like to keep dependencies at a minimum. Any suggestions? I only need a viewer; organising my pictures is not a plus. No exotic formats, just jpeg, gif and the usual. Thanks in advance, Vlad Tools i usually rely on are * feh : uses imlib ( brags to be the fastest ) , very lightweight in use, but an insane collection of features if you read the man pages to see the extra tricks it can perform * gliv :uses opengl and gtk , making it awesome for viewing some of those larger images using the fast and quality scaling algos of your GPU *fbi : ( media-gfx/fbida) which is great for viewing images when you cant be bothered cracking open X * anytopnm + aview : for days your feeling geeky and need to display images in a textual representation ( black and white ) * cacaview : for days you want to demostrate how much free time geeks have and nothing else feels like working cos your stuck on a windows box with PUTTY. Hi Kent, I'm definitely keeping this list for later use, thanks a lot for your input. Vlad
Re: [gentoo-user] Setting up a home router
Hi, On Mon, 15 Jan 2007 19:23:53 +0100 Daniel Pielmeier [EMAIL PROTECTED] wrote: No, that's (usually) correct. But in the route excerpt you've cited above (please post route -n next time!) the route for localhost was set to dev eth0. Also, the subnet was a /24 one, instead of the usual /8 for localhost. So there's some inconsistency between that file and the routes. The /etc/hosts you've shown looks good, please post dnsmasq's config. Here are the files you have requested! route -n on router Kernel IP routing table Destination Gateway Genmask Flags Metric RefUse Iface 88.67.16.1 0.0.0.0 255.255.255.255 UH0 00 ppp0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 00 eth0 127.0.0.0 0.0.0.0 255.0.0.0 U 0 00 lo 0.0.0.0 88.67.16.1 0.0.0.0 UG0 00 ppp0 Ah, OK, so *this* is fine. The route for eth0 is correct. So it's just the name resolving on the router that returns localhost when being asked for the hostname for 192.168.0.1. Since all of this isn't about name resolving, we probably can even leave out that dnsmasq thingy. But your config is essentially this: interface=eth0 dhcp-range=192.168.0.1,192.168.0.255,72h If this is supposed to work, chose another beginning of that range, at least 192.168.0.2. But I think dnsmasq is even clever enough not to issue its own address to clients. I'll write a separate post about the firewalling issues in a moment. -hwh -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
Hi, On Mon, 15 Jan 2007 19:17:45 +0100 Daniel Pielmeier [EMAIL PROTECTED] wrote: Send the output from iptables-save, please. Otherwise we could only guess if the problem is with your firewall rules or somewhere else. Here we go! # Generated by iptables-save v1.3.5 on Mon Jan 15 19:09:43 2007 [...] everything looks fine. I'm not quite sure about the policy module, I did never use it and it is somehow being used to check the direction of packets. Maybe someone else can comment. So remaining things to check would be - where do packets do what? Use tcpdump on the router to monitor how packets flow. Don't cite all the output, but look at where packets are coming and going. Two terminals with tcpdump -i eth0 and tcpdump -i ppp0 would tell you that. Send a few pings from the desktop to the internet. Also try pinging an IP from the desktop, not just hostnames (to rule out nameserver borkage). - is forwarding actually really enabled? Just cat the relevant /proc/sys/net/ipv4/ip_forward. -hwh -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Exclude package from emerge world ?
On Monday 15 January 2007 23:02, Jean-Baptiste Mestelan wrote: Hello. I am trying to emerge -uD world and getting an error on app-emulation/wine-20050930 (error stack is below, if YOU can decipher it;). wine- builds fine, but emerge world insists on building 20050930, and I am not too sure why ? Probably some other package depends on 20050930, but how can I check this ? (I might afford to unmerge this package, and do do without it for the moment ...) Or can I command emerge world to exclude wine ? [SNIP] Both 20050930 and are masked (illegally) by missing keyword. I assume you've simply put app-emulation/wine -* in your p.keywords to unmask it. Instead you should put ~app-emulation/wine- -* in there. The problem is that emerge wrongly thinks that 20050930 is newer than because the number is greater. -- Bo Andresen pgpjgPUfkhxXq.pgp Description: PGP signature
Re: [gentoo-user] Setting up a home router
- is forwarding actually really enabled? Just cat the relevant /proc/sys/net/ipv4/ip_forward. cat /proc/sys/net/ipv4/ip_forward returns 1 So remaining things to check would be - where do packets do what? Use tcpdump on the router to monitor how packets flow. Don't cite all the output, but look at where packets are coming and going. Two terminals with tcpdump -i eth0 and tcpdump -i ppp0 would tell you that. Send a few pings from the desktop to the internet. Also try pinging an IP from the desktop, not just hostnames (to rule out nameserver borkage). Here is what tcdump returns! ping to www.google.de from desktop ping -c5 209.85.135.147 PING 209.85.135.147 (209.85.135.147) 56(84) bytes of data. --- 209.85.135.147 ping statistics --- 5 packets transmitted, 0 received, 100% packet loss, time 4000ms tcpdump -i ppp0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on ppp0, link-type LINUX_SLL (Linux cooked), capture size 96 bytes 00:23:34.170023 IP dslb-088-065-173-238.pools.arcor-ip.net.32864 dns1.arcor-ip.de.domain: 62186+ PTR? 147.135.85.209.in-addr.arpa. (45) 00:23:34.170885 IP dslb-088-065-173-238.pools.arcor-ip.net.32865 dns1.arcor-ip.de.domain: 49362+ PTR? 11.2.253.145.in-addr.arpa. (43) 00:23:34.186127 IP dns1.arcor-ip.de.domain dslb-088-065-173-238.pools.arcor-ip.net.32864: 62186 NXDomain 0/1/0 (105) 00:23:34.192706 IP dns1.arcor-ip.de.domain dslb-088-065-173-238.pools.arcor-ip.net.32865: 49362 1/0/0 (73) 00:23:34.193083 IP dslb-088-065-173-238.pools.arcor-ip.net.32865 dns1.arcor-ip.de.domain: 55934+ PTR? 238.173.65.88.in-addr.arpa. (44) 00:23:34.250939 IP dns1.arcor-ip.de.domain dslb-088-065-173-238.pools.arcor-ip.net.32865: 55934 1/0/0 (97) 00:23:44.770408 IP cpc1-pnth1-0-0-cust807.cdif.cable.ntl.com.18730 dslb-088-065-173-238.pools.arcor-ip.net.13040: UDP, length 98 00:23:44.770494 IP dslb-088-065-173-238.pools.arcor-ip.net cpc1-pnth1-0-0-cust807.cdif.cable.ntl.com: ICMP dslb-088-065-173-238.pools.arcor-ip.net udp port 13040 unreachable, length 134 00:23:44.770752 IP dslb-088-065-173-238.pools.arcor-ip.net.32865 dns1.arcor-ip.de.domain: 21398+ PTR? 40.23.6.82.in-addr.arpa. (41) 00:23:44.820873 IP dns1.arcor-ip.de.domain dslb-088-065-173-238.pools.arcor-ip.net.32865: 21398 1/0/0 (96) 00:23:46.085482 IP 222.69.242.140.19774 dslb-088-065-173-238.pools.arcor-ip.net.13040: UDP, length 98 00:23:46.085566 IP dslb-088-065-173-238.pools.arcor-ip.net 222.69.242.140: ICMP dslb-088-065-173-238.pools.arcor-ip.net udp port 13040 unreachable, length 134 00:23:46.085811 IP dslb-088-065-173-238.pools.arcor-ip.net.32865 dns1.arcor-ip.de.domain: 28846+ PTR? 140.242.69.222.in-addr.arpa. (45) 00:23:46.509496 IP dns1.arcor-ip.de.domain dslb-088-065-173-238.pools.arcor-ip.net.32865: 28846 NXDomain 0/1/0 (105) 00:23:52.092567 IP 222.69.242.140.19774 dslb-088-065-173-238.pools.arcor-ip.net.13040: UDP, length 98 00:23:52.092624 IP dslb-088-065-173-238.pools.arcor-ip.net 222.69.242.140: ICMP dslb-088-065-173-238.pools.arcor-ip.net udp port 13040 unreachable, length 134 00:23:54.447053 IP dslb-084-057-191-176.pools.arcor-ip.net.3158 dslb-088-065-173-238.pools.arcor-ip.net.epmap: S 2228649193:2228649193(0) win 53760 mss 1412,nop,wscale 3,nop,nop,timestamp 0 0,nop,nop,sackOK 00:23:54.447386 IP dslb-088-065-173-238.pools.arcor-ip.net.32865 dns1.arcor-ip.de.domain: 55370+ PTR? 176.191.57.84.in-addr.arpa. (44) 00:23:54.463773 IP dns1.arcor-ip.de.domain dslb-088-065-173-238.pools.arcor-ip.net.32865: 55370 1/0/0 (97) tcpdump -i eth0 tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 00:23:32.895513 IP gentoo-vdr.linux.net.54934 gentoo.linux.net.ssh: P 2356170685:2356170733(48) ack 1373265494 win 1034 nop,nop,timestamp 1888728 4586914 00:23:32.895566 IP gentoo.linux.net.ssh gentoo-vdr.linux.net.54934: P 1:49(48) ack 48 win 81 nop,nop,timestamp 4721101 1888728 00:23:32.895604 IP gentoo-vdr.linux.net.54934 gentoo.linux.net.ssh: . ack 49 win 1034 nop,nop,timestamp 1888728 4721101 00:23:33.913406 IP gentoo-vdr.linux.net.36415 gentoo.linux.net.ssh: P 220729975:220730023(48) ack 3542615936 win 5880 nop,nop,timestamp 129 4706313 00:23:33.913491 IP gentoo.linux.net.ssh gentoo-vdr.linux.net.36415: P 1:65(64) ack 48 win 116 nop,nop,timestamp 4721355 129 00:23:33.913528 IP gentoo-vdr.linux.net.36415 gentoo.linux.net.ssh: . ack 65 win 5880 nop,nop,timestamp 129 4721355 00:23:34.168115 IP gentoo-vdr.linux.net.36415 gentoo.linux.net.ssh: P 48:96(48) ack 65 win 5880 nop,nop,timestamp 155 4721355 00:23:34.168191 IP gentoo.linux.net.ssh gentoo-vdr.linux.net.36415: P 65:113(48) ack 96 win 116 nop,nop,timestamp 4721419 155 00:23:34.168229 IP gentoo-vdr.linux.net.36415 gentoo.linux.net.ssh: . ack 113 win 5880 nop,nop,timestamp 155 4721419 00:23:34.168756 IP gentoo.linux.net.ssh gentoo-vdr.linux.net.36415: P 113:209(96) ack 96 win 116
Re: [gentoo-user] How can I emerge a program with debugging options?
On Mon, 2007-01-15 at 10:13 +0100, qfpvajdy wrote: Hello, I would like to emerge a program with debugging options CFLAGS=-g put CFLAGS in /etc/make.conf and without strip at the end of the build. you can use either nostrip _or_ splitdebug. the first obviously stops stripping, the second strips files, but takes the debug info and puts it in another file in /usr/lib/debug first. This means you get the benefit of smaller executables, but still have debug info. And you can always delete /usr/lib/debug when you've had enough! This is relevant parts from my make.conf: DEBUG=-g CFLAGS=-O2 -march=pentium4 -pipe ${DEBUG} CXXFLAGS=${CFLAGS} FEATURES=fixpackages userpriv usersandbox userfetch splitdebug This way, I can comment out the DEBUG= line, and I don't get the debug info. see here for more info: http://www.gentoo.org/proj/en/qa/backtraces.xml HTH, -- Iain Buchanan iaindb at netspace dot net dot au I can just see it now: nomination-terrorism ;-) -- Manoj haha! i nominate manoj. -- seeS -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Exclude package from emerge world ?
On Mon, 2007-01-15 at 22:02 +, Jean-Baptiste Mestelan wrote: Hello. I am trying to emerge -uD world and getting an error on app-emulation/wine-20050930 (error stack is below, if YOU can decipher it;). [snip] Or can I command emerge world to exclude wine ? yes, you can: emerge --resume --skipfirst after the failed wine build, and emerge will continue on with the next ebuild. HTH, -- Iain Buchanan iaindb at netspace dot net dot au ... And remember: if you don't like the news, go out and make some of your own. -- Scoop Nisker, KFOG radio reporter Preposterous Words -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Exclude package from emerge world ?
Many thanks to each of you who kindly answered :-) I can understand what is going on, now (indeed, I have added app-emulation/wine -* in p.keywords). Thanks for these tips. Regards. On 1/15/07, Iain Buchanan [EMAIL PROTECTED] wrote: On Mon, 2007-01-15 at 22:02 +, Jean-Baptiste Mestelan wrote: Hello. I am trying to emerge -uD world and getting an error on app-emulation/wine-20050930 (error stack is below, if YOU can decipher it;). [snip] Or can I command emerge world to exclude wine ? yes, you can: emerge --resume --skipfirst after the failed wine build, and emerge will continue on with the next ebuild. HTH, -- Iain Buchanan iaindb at netspace dot net dot au ... And remember: if you don't like the news, go out and make some of your own. -- Scoop Nisker, KFOG radio reporter Preposterous Words -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
Hi, On Tue, 16 Jan 2007 00:30:30 +0100 Daniel Pielmeier [EMAIL PROTECTED] wrote: - is forwarding actually really enabled? Just cat the relevant /proc/sys/net/ipv4/ip_forward. cat /proc/sys/net/ipv4/ip_forward returns 1 So remaining things to check would be - where do packets do what? Use tcpdump on the router to monitor how packets flow. Don't cite all the output, but look at where packets are coming and going. Two terminals with tcpdump -i eth0 and tcpdump -i ppp0 would tell you that. Send a few pings from the desktop to the internet. Also try pinging an IP from the desktop, not just hostnames (to rule out nameserver borkage). Here is what tcdump returns! [...] That's what I wanted to avoid with asking for not citing everything :-) But everything looks quite normal, except for that packets aren't routed. So its up to somebody else to tell exactly what that policy module in iptables does -- and how. I don't have answers left here -- except for the case that a manual iptables setup is sufficient. Personally, I'm quite happy with $ iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE $ iptables -A FORWARD -i eth0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT $ iptables -A FORWARD -i ppp0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT for the forwarding. All that fancy-schmanzy stuff that shorewall does isn't in there, granted. -hwh -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Setting up a home router
Hans-Werner Hilse wrote: Hi, On Tue, 16 Jan 2007 00:30:30 +0100 Daniel Pielmeier [EMAIL PROTECTED] wrote: - is forwarding actually really enabled? Just cat the relevant /proc/sys/net/ipv4/ip_forward. cat /proc/sys/net/ipv4/ip_forward returns 1 So remaining things to check would be - where do packets do what? Use tcpdump on the router to monitor how packets flow. Don't cite all the output, but look at where packets are coming and going. Two terminals with tcpdump -i eth0 and tcpdump -i ppp0 would tell you that. Send a few pings from the desktop to the internet. Also try pinging an IP from the desktop, not just hostnames (to rule out nameserver borkage). Here is what tcdump returns! [...] That's what I wanted to avoid with asking for not citing everything :-) But everything looks quite normal, except for that packets aren't routed. So its up to somebody else to tell exactly what that policy module in iptables does -- and how. I don't have answers left here -- except for the case that a manual iptables setup is sufficient. Personally, I'm quite happy with $ iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE $ iptables -A FORWARD -i eth0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT $ iptables -A FORWARD -i ppp0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT for the forwarding. All that fancy-schmanzy stuff that shorewall does isn't in there, granted. -hwh Well, I got lucky. I'm not real sure what I did to be honest. Here is my main box that is connected to the net: [EMAIL PROTECTED] / # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface nas2.greenwood1 * 255.255.255.255 UH0 0 0 ppp0 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 loopback* 255.0.0.0 U 0 00 lo default nas2.greenwood1 0.0.0.0 UG0 0 0 ppp0 [EMAIL PROTECTED] / # [EMAIL PROTECTED] / # iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination [EMAIL PROTECTED] / # This is from the second rig: swifty ~ # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.0.0 * 255.255.255.0 U 0 0 0 eth0 loopback* 255.0.0.0 U 0 00 lo default smoker 0.0.0.0 UG0 0 0 eth0 swifty ~ # No iptables on this one. I don't know what I did but it all works. I guess even I get lucky sometimes. :-O Dale :-) :-) :-) -- www.myspace.com/dalek1967
Re: [gentoo-user] Telling emerge to continue when something goes wrong
On Sunday 14 January 2007 20:22, Iván Pérez Domínguez wrote: I'm posting this here before going to gentoo-portage-dev or other list to know what you think and to try to write a better suggestion. There is a bug open for this. https://bugs.gentoo.org/show_bug.cgi?id=12768 -- Bo Andresen pgp6KSdgRbn9F.pgp Description: PGP signature
Re: [gentoo-user] Setting up a home router
Again the quick dirty solution: /etc/init.d/iptables stop iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE /etc/init.d/iptables save rc-update -a iptables default /etc/init.d/iptables start -- Best regards, Daniel -- gentoo-user@gentoo.org mailing list