[gentoo-user] hald issue
Folks; Just merged hal, dbus, and ivman. dbus starts, but hald does not and there is no hint in the /var/log/messages as to why. Running kernel 2.6.16 (kde-3.5.2) Starting hald gives the following output, but nothing else # /etc/init.d/hald start * Re-caching dependency info (mtimes differ)... * Re-caching dependency info (mtimes differ)... * Re-caching dependency info (mtimes differ)... * Re-caching dependency info (mtimes differ)... * Starting Hardware Abstraction Layer daemon ... [ !! ] ivman cannot start cos it depends on a running hald Any clues to help solve this issue 'll be appreciated. Are there other easy to configure packages that offer the same functionality as ivman out there? TIA -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] swat
On Saturday 25 March 2006 07:05 pm, JimD wrote: Is there anything special to do to get swat to work? I installed samba/swat. I went and enabled swat as an xinetd service and restarted xinetd. Netstat shows xinetd on port 901. Where did you find swat to install? Last time I checked, swat is not available in portage or even on Freshmeat. -- gentoo-user@gentoo.org mailing list
[gentoo-user] stock tracker
Hello: I'm looking for a scrolling stock ticker/tracker for Kde or Gnome. Any good one out there? TIA, -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] stock tracker
On Saturday 11 March 2006 08:32 am, Bob Sanders wrote: On Sat, 11 Mar 2006 07:55:39 -0600 Qv6 [EMAIL PROTECTED] wrote: Hello: I'm looking for a scrolling stock ticker/tracker for Kde or Gnome. Any good one out there? I've used tclticker for ages. It's not desktop specific. http://www.nyx.net/~tpoindex/tcl.html Thanks you very much. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Gentoo LVM Newbie Question
On Thursday 23 February 2006 02:22 pm, CR Little wrote: I'm having a problem with LVM. I setup a volume group it had 5.91G in Free PE/Size now states 0/0 --- Volume group --- VG Name vg VG Size 55.91 GB PE Size 4.00 MB Total PE 14313 Alloc PE / Size 14313 / 55.91 GB Free PE / Size 0 / 0 I have a logical volume inside that I tried to extend --- Logical volume --- LV Name/dev/vg/home VG Namevg LV UUIDvx9591-nXtD-0Yj6-F0ah-TjcH-5jEq-BGFIze LV Write Accessread/write LV Status available # open 1 LV Size10.91 GB Current LE 2793 Segments 3 Allocation inherit Read ahead sectors 0 Block device 253:1 It now states 10.91 GB for LV Size. This lv is mounted to /home when I ran lvextend -L+5.91G /dev/vg/home it extended the lv but when you run df-h it doesn't show an increased size. /dev/mapper/vg-home 5.0G 1.6G 3.2G 33% /home Apparently I missed a step and can't find any information on how to fix this. Doesn't it need to know how to format and add the LV extention? Assuming you are using a reiserfs filesystem, resizing it is a 2-step process. The first step is what you have accomplished. The second step is: resize_reiserfs -f /dev/vg/home However, given the output of your vgdisplay with particular reference to the lines below, I doubt that you can resize any logical volumes in your volume group: VG Size 55.91 GB Total PE 14313 Alloc PE / Size 14313 / 55.91 GB Free PE / Size 0 / 0 -- gentoo-user@gentoo.org mailing list
[gentoo-user] mod_php5
Folks: I'm in the process of installing awf-cms - http://awf-cms.org. The install, however, requires mod_php5 which I cannot find with emerge. Has anyone actually installed mod_php5 on a gentoo system? TIA -- gentoo-user@gentoo.org mailing list
[gentoo-user] kde and network sound
Folks Has anyone figured out how to use the kde network sound feature. I'd like to try it, but not sure how to go about iit. TIA -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] phpmyadmin user/password?
On Thursday 15 December 2005 05:24 pm, Daevid Vincent wrote: I emerged phpmyadmin 2.7 and when I go to the URL, it prompts for a user/password. What exactly is this user/pw it's looking for? The one stored in mysql.users? My actual account? Both in this case have no password set. It's asking for the Mysql username/password root user. Recall that phpmyadmin is used to administer/administrate Mysql -- gentoo-user@gentoo.org mailing list
[gentoo-user] cms
Folks: I am looking for a really good Content Management System that is feature-rich and easy to install. Webgui seems good, but the install is tedious. A good, enterprise-class cms is what I'm looking for. Any suggestioons? TIA -- gentoo-user@gentoo.org mailing list
[gentoo-user] teamspeak
Folks; Just came across teamspeak, and wanted to find out how it rates alongside other similar software. What are its good and bad points, both from the server and client side TIA -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] teamspeak
On Friday 09 December 2005 11:28 pm, Thomas Harold wrote: AFAIK, the only choices for group-based voice-chat are either Ventrillo or TeamSpeak. Currently, TeamSpeak seems to have the more friendly licensing for small groups of individuals who want to stay in touch (and have a central voice chat, i.e. for playing games together). I've used both, and other then the licensing issue, I don't really have a preference. Thanks. I just looked at the ventrilo site and I agree with you on the licensing issue; not very comfortable with it. Aside from Teamspeak and Ventrilo, I also came across Asernal - http://arsenalproject.org/ It's open source -- gentoo-user@gentoo.org mailing list
[gentoo-user] ciphiremail client
Folks, I'm trying to install ciphiremail and just wanted to find out from those users familiar with it what, if any, issues they've encountered using it. Although they claim to have no government backing, has anyone been able to verify this claim? TIA -- gentoo-user@gentoo.org mailing list
[gentoo-user] drupal help needed
I have tried the drupal forum for help on this issue, but have not gotten a workable solution. the issue is: I have a fresh install of drupal and have performed all the post-install procedures. The startup page for drupal displays, but when I click on create the first account or on any link on the page, I'm redirected to the index.html page of the apache server. Any clues? TIA, -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] cups printing error
On Monday 07 November 2005 05:49 am, brullo nulla wrote: Well, by looking on the forums it seems you have a mixed system. kdepim is a monolithic package. kdepim-kioslaves is a package of the kde split packages. Try unmerging kdepim and emerging kdepim-meta, and anyways be sure of having a kde relying on split packages (that's the way to go in the future) http://forums.gentoo.org/viewtopic-t-355389.html Thanks -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] cups printing error
On Monday 31 October 2005 06:43 am, brullo nulla wrote: problem 1: can no longer access my block devices from Konqueror. From Konqueror I get a Protocol not supported error when I click on the devices tab. So I can't access my usb disk or even view my partitions from Konqueror. It seems you lack the correct kioslaves. When you emerged the split ebuilds, what did you emerge? This is an aspect of Gentoo that I don't understand very well. the various kioslaves block other packages and vice-versa. For example, kdepim blocks kdepim-kioslaves, and kdebase blocks kdebase-kioslaves. Same goes for kdemultimedia and kdemultimedia-kioslaves. As a test, I unmerged kdepim and emerged kdepim-kioslaves and now my kmail is messed up. Thing is I cannot emerge both at the same time. Any ideas? TIA -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] KDE GUI for network settings
On Wednesday 02 November 2005 09:02 am, Mark wrote: I have a KDE desktop on one of my machines, and noticed I couldn't find any GUI interface to manage the IP address and related configurations for the 2 ethernet cards on the box. I have installed kdenetworks, but still don't see anything. What do I need to install/enable/locate on my system to manage eth0 and eth1 from the GUI? Thanks! If you really need a mature gui to manage your interface(s), try webmin. It gives that feature and a lot more. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] KDE GUI for network settings
On Wednesday 02 November 2005 09:02 am, Mark wrote: I have a KDE desktop on one of my machines, and noticed I couldn't find any GUI interface to manage the IP address and related configurations for the 2 ethernet cards on the box. I have installed kdenetworks, but still don't see anything. What do I need to install/enable/locate on my system to manage eth0 and eth1 from the GUI? Thanks! You are referring to knetworkconf. This is currently not available in kde under Gentoo. It is available in kde under Knoppix. In fact I don't think it exist in kde - by default - under any other distro but Knoppix. The official link is http://knetworkconf.sourceforge.net/ Don't expect to find it with emerge knetworkconf. Just wait for kde-3.5 -- gentoo-user@gentoo.org mailing list
[gentoo-user] cups printing error
Folks; Just upgraded kde from 3.3.2 to 3.4.1 and now have the following problems: problem 1: can no longer access my block devices from Konqueror. From Konqueror I get a Protocol not supported error when I click on the devices tab. So I can't access my usb disk or even view my partitions from Konqueror. problem 2: can no longer print from the local machine or from my windows pc. I get this error when I attempt to print from either the local box or from windows via samba: -- Unable to print file to `HPPSC2210' - client-error-request-value-too-long -- Any clues, TIA -- gentoo-user@gentoo.org mailing list
[gentoo-user] xfs issue
Folks: Just compiled a new kernel - 2.6.13-r3 (was using 2.6.11-r4), and upgraded kde from 3.3.2 to 3.4. On booting into the new kernel, the base system boots fine, but kde hangs. It seems from the error that xfs could not be started. The error when I start xfs manually is: gentoo# /etc/init.d/xfs start * Scanning font directories ... [ ok ] * starting X font server ... [ ok ] start-stop-daemon: stat /usr/X11R6/bin/xfs: No such file or directory [ !! ] xfsinfo returns a no font server defined message I tried emerg-ing xfs and got this error: !!! All ebuilds that could satisfy xfs hav been masked. I've played with the package.keywords and package.unmask with no positive result Note: never had any issue with the previous kernel (2.6.11-r3), Note: the pc is a Fujitsu Lifebook series laptop Note: which xfs returns xfs: /usr/include/xfs Any clues to sove this will be very mush appreciated. -- gentoo-user@gentoo.org mailing list
[gentoo-user] out of sync audio
Folks I have just created a vcd from one of my dvd's using dvd::rip. The problem is that the audio is out of sync ( with the speakers lips). Is there something special I need to do, or is there a filter that I need to enable? TIA, -- gentoo-user@gentoo.org mailing list
[gentoo-user] dvd compression
Does anyone on this list know of a good sw to transfer a dvd movie to a cdrom? That is a tool that will compress a dvd down to about 700mb in mpeg foramt. TIA, -- Qv6 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] system update
Thanks On Friday 15 July 2005 03:08 am, Mariusz Pękala wrote: On 2005-07-15 00:46:45 +0100 (Fri, Jul), Edward Catmur wrote: On Thu, 2005-07-14 at 17:58 -0500, Qv6 wrote: I am currently running kde-3.3, and do not want to have both 3.3 and 3.4 on the box. How can I update kde or any other app and not have the old version still installed. Update kde as usual, then # emerge -av --depclean Make sure that portage doesn't offer to remove packages you want to keep installed! Also a good idea to run revdep-rebuild afterwards. As this version of kde is slotted I believe that after your compilation finishes, and you find the new KDE in working state, you should: emerge prune kde emerge -va prune arts and then run emerge -av --depclean After depclean there will be a few leftovers from kde if I recall well. You may find them looking at /usr/kde/3.3/ and finding packages that own files left there. qpkg -f /usr/kde/3.3/some-file emerge -va prune the-package-found-if-it-is-part-of-kde Some files will not belong to any package, you may delete them, some packages will have to be rebuild to use the new KDE version and leave the old - dev-db/knoda in my case... Surely you may cook a nice script that will find and clear the KDE leftovers in more hackish way, but it was very hot the day I was doing this and my brain cooling system was not working properly... :-) Remember to run revdep-rebuild -p after you remove some packages. It may help you to find ones that need to be unmerged, and it is anyway a good habit to run it. HTH. -- gentoo-user@gentoo.org mailing list
[gentoo-user] system update
Folks, I'm trying to update my system with this command: emerge world -Dup and got this type of output: snip ... [ebuild NS ] kde-base/kdebase-3.4.0 [ebuild NS ] kde-base/kdeartwork-3.4.0 [ebuild NS ] kde-base/kdegames-3.4.0 ... snip I am currently running kde-3.3, and do not want to have both 3.3 and 3.4 on the box. How can I update kde or any other app and not have the old version still installed. TIA, -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] /dev permissions
On Monday 20 June 2005 01:00 am, Ow Mun Heng wrote: Are you in the cdrom group. (I'm assuming you can't get access to the cdrom?) I am in the cdrom group -- gentoo-user@gentoo.org mailing list
[gentoo-user] /dev permissions
Hello: Just looked under /dev and observed that the ownership of all the entries are root:root with mostly 555 permissions. Is this the default or do I have to change anything? Here's a snip from ls -l /dev lr-xr-xr-x 1 root root 10 Jun 17 06:55 adsp - sound/adsp lr-xr-xr-x 1 root root 12 Jun 17 06:55 agpgart - misc/agpgart lr-xr-xr-x 1 root root 11 Jun 17 06:55 audio - sound/audio lr-xr-xr-x 1 root root 13 Jun 17 06:55 cdrom - cdroms/cdrom0 drwxr-xr-x 1 root root 0 Dec 31 1969 cdroms drwxr-xr-x 1 root root 0 Dec 31 1969 discs drwxr-xr-x 1 root root 0 Jun 17 06:55 dri lr-xr-xr-x 1 root root 9 Jun 17 06:55 dsp - sound/dsp lr-xr-xr-x 1 root root 8 Jun 17 06:55 dvd - /dev/hdc drwxr-xr-x 1 root root 0 Dec 31 1969 floppy drwxr-xr-x 1 root root 0 Dec 31 1969 usb Is this the reason why I cannot play dvd movies? TIA, -- Qv6 -- gentoo-user@gentoo.org mailing list
[gentoo-user] xscreensaver
Hello I am trying to customize xscreensaver to show personal photos in a random fashion.. What file do I need to mess with to get this done? TIA, -- Qv6 -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: xscreensaver
On Tuesday 31 May 2005 02:34 pm, Botykai Zsolt wrote: Tuesday 31 May 2005 11.18-n, Qv6 ezt írta: I am trying to customize xscreensaver to show personal photos in a random fashion.. What file do I need to mess with to get this done? from command line start xscreensaver-demo, then click on the 'advanced' tab, and check 'Choose random image' and set the directory you need. Then on the 'display modes' tab try (e.g.) the blitspin 'module'. HTH Thanks, but I was referring to the screensaver that's built into kde. Emerge shows that I do not have kscreensaver or xscreensaver installed. -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: xscreensaver
On Tuesday 31 May 2005 10:07 pm, Neil Bothwick wrote: . Right-click on the desktop, select Configure Desktop and go to the Screensaver section. Select Slide Show under Banners Pictures and click Setup to pick the directory. thank you -- gentoo-user@gentoo.org mailing list
[gentoo-user] cannot mount dvd
Folks: Just installed Gentoo on a laptop with a dvd-rom. Everything seems ok, except that the system cannot mount dvd's. I have done the following: ln -s /dev/cdrom /dev/dvd (also tried, ln -s /dev/hdc /dev/dvd) and have configured /etc/fstab like so: /dev/cdrom /mnt/cdrom iso9660 noauto,ro,users 0 0 /dev/dvd /mnt/dvd iso9660 noauto,ro,users 0 0 Any clues as to how to get the system to mount and play dvd's ? TIA, -- Qv6