[JAWS-Users] Is there an easier way to navigate the JAWS Users List digest
I receive the JAWS Users List in digest format. Is there an easier way to navigate the long list of messages other than by the arrow keys? What about by headings, sub headings, etc. Thanks, Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] problem with Verizon after the recent change over
I had problem with the change over too. Was resolved when I unplugged router and plugged it back in. Sent from my iPhone > On May 28, 2017, at 10:44 AM, David Ferrinwrote: > > My apologies Gerald as this email client is still acting up and as such your > message came across blank to me. This only happens on this list with this > computer. It might be something with Vipre or I might need to find another > mail client for this system. Either way please send this message again and I > will get it on one of my other systems. > > I just subscribed two of my other email addresses so to be sure one of them > will receive messages fine until I track down the problem with this one. > Thanks in advance for replying again. > > -Original Message- From: Gerald Levy > Sent: Sunday, May 28, 2017 9:54 AM > To: jaws-users-list@jaws-users.com > Subject: Re: [JAWS-Users] problem with Verizon after the recent change over > > > > > For answers to frequently asked questions about this list visit: > http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] jaws and 8.1 upgrade
I lost speech during the upgrade process and my wife had to complete it. However, when the computer rebooted afterward, JAWS worked just fine. I had a lot of other problems after the 8.1 upgrade though but I won't go into that as you didn't ask about that. I may go back to 8 myself. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Kimsan Song Sent: Tuesday, March 3, 2015 2:05 PM To: jaws-users Subject: [JAWS-Users] jaws and 8.1 upgrade Hello folks: I had to reset my machine back over to windows 8 from 8.1. Long story, so I will just ask my question. When upgrading from 8-to-8.1 did any of you have speech after the upgrade was completed? It's been a long while since I've done this, so do not remember, thanks. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Uninstalling Jaws
Hey Trish, Just do what I do. Never uninstall a JAWS version. Each one only takes a couple hundred megs and this laptop has a 750 gig hard drive so it's not like I'm hurting for space. I suspect that most JAWS users also have plenty of space on their machines. Leaving all JAWS versions doesn't hurt anything but removing them might so I just leave them just to be safe. I know, removing previous versions shouldn't hurt anything but I've seen plenty of times when things that shouldn't hurt anything in fact do. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Trish Sent: Thursday, February 26, 2015 8:51 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Uninstalling Jaws well then, sounds like you can't uninstall anything since it's all dependent of each version. I have still only removed the talking installer for J12, which as I stated yesterday, that didn't even have the entire program on my laptop, so I felt safe it could go. I sure don't need any surprises, thanks for the info - Original Message - From: Alan Robbins arobb...@blindhandyman.net To: jaws-users-list@jaws-users.com Sent: Thursday, February 26, 2015 7:33 AM Subject: Re: [JAWS-Users] Uninstalling Jaws Trish, But if you have more than one copy of JAWS on the laptop they all share the same shared files. So, if you remove an older version of JAWS and remove shared components my guess is you will have trouble with version 15 and/or 16. I'll tell you how temperamental this process can be. Yesterday I uninstalled JAWS 14 leaving shared components in place. Following that I removed the talking installer for version 14. I then rebooted and JAWS 16 came up as expected. I then had some work to do in MS Office 2010. I use virtual ribbon option and as soon as I hit the alt key to get to the ribbons, no speech. This was true in all Office programs. So, I tried JAWS 15, same thing. I turned virtual ribbon option off and ribbons worked fine. Turned it back on and no go. Fortunately Win 7 automatically creates a restore point prior to any install or uninstall. So, I restored to point before uninstalling JAWS 14 and all is well. So, there you have a problem even when keeping shared components. Just thought I'd share Best, Al -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Trish Sent: Thursday, February 26, 2015 7:54 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Uninstalling Jaws Thank you for that info. I will not remove the shared components on the desktop where the OB is sharing with Jaws, but the laptop doesn't have OB and jaws is just sharing window's,lol - Original Message - From: Mike Boyd mike@comcast.net To: jaws-users-list@jaws-users.com Sent: Thursday, February 26, 2015 2:19 AM Subject: Re: [JAWS-Users] Uninstalling Jaws If you are running JAWS and Open Book, or JAWS and Magic, then this is where your shared components come into play. two Freedom Scientific products can share some of the same components of one's installation. Therefore, if you have two of these installed on your computer, and you uninstall the shared components when uninstalling, say, JAWS, then Open Book will not work properly. Mike mike@comcast.net Best regards, Michael Boyd mikeboy...@outlook.com (985) 856-6135 -Original Message- From: Alan Robbins Sent: Wednesday, February 25, 2015 11:09 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Uninstalling Jaws Trish, I do not believe it really makes a difference. The important thing is whether you want to uninstall the shared components. Personally, I always choose no to this because if there are other programs relying on those shared components they will not work correctly. If anyone else on the list has other information, or does not find what I am saying correct, please clarify. Best, Alan On Feb 25, 2015, at 11:10, Trish patricia.zoell...@tx.rr.com wrote: I need to know which is the best way to remove jaws from my window's 7 laptop? Do I do it through the control panel/programs-features or, through Jaws on start menu uninstall? Thanks for any help, Trish For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Uninstalling Jaws
No, it is not rocket science to do a JAWS uninstall and I have done it plenty of times but I usually don't anymore because, as has been stated on here, it can occasionally cause problems. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Rose Combs Sent: Thursday, February 26, 2015 1:06 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Uninstalling Jaws Honestly, I keep usually two versions on a computer, the latest and the version before that, it really is not rocket science to do the uninstall. I had four versions on one computer because I kept forgetting, then one day I took all but the current one off, maybe it does not take much disk space, however, if I am not using it why keep it hanging around. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Duck Sent: Thursday, February 26, 2015 8:25 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Uninstalling Jaws Hey Trish, Just do what I do. Never uninstall a JAWS version. Each one only takes a couple hundred megs and this laptop has a 750 gig hard drive so it's not like I'm hurting for space. I suspect that most JAWS users also have plenty of space on their machines. Leaving all JAWS versions doesn't hurt anything but removing them might so I just leave them just to be safe. I know, removing previous versions shouldn't hurt anything but I've seen plenty of times when things that shouldn't hurt anything in fact do. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Trish Sent: Thursday, February 26, 2015 8:51 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Uninstalling Jaws well then, sounds like you can't uninstall anything since it's all dependent of each version. I have still only removed the talking installer for J12, which as I stated yesterday, that didn't even have the entire program on my laptop, so I felt safe it could go. I sure don't need any surprises, thanks for the info - Original Message - From: Alan Robbins arobb...@blindhandyman.net To: jaws-users-list@jaws-users.com Sent: Thursday, February 26, 2015 7:33 AM Subject: Re: [JAWS-Users] Uninstalling Jaws Trish, But if you have more than one copy of JAWS on the laptop they all share the same shared files. So, if you remove an older version of JAWS and remove shared components my guess is you will have trouble with version 15 and/or 16. I'll tell you how temperamental this process can be. Yesterday I uninstalled JAWS 14 leaving shared components in place. Following that I removed the talking installer for version 14. I then rebooted and JAWS 16 came up as expected. I then had some work to do in MS Office 2010. I use virtual ribbon option and as soon as I hit the alt key to get to the ribbons, no speech. This was true in all Office programs. So, I tried JAWS 15, same thing. I turned virtual ribbon option off and ribbons worked fine. Turned it back on and no go. Fortunately Win 7 automatically creates a restore point prior to any install or uninstall. So, I restored to point before uninstalling JAWS 14 and all is well. So, there you have a problem even when keeping shared components. Just thought I'd share Best, Al -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Trish Sent: Thursday, February 26, 2015 7:54 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Uninstalling Jaws Thank you for that info. I will not remove the shared components on the desktop where the OB is sharing with Jaws, but the laptop doesn't have OB and jaws is just sharing window's,lol - Original Message - From: Mike Boyd mike@comcast.net To: jaws-users-list@jaws-users.com Sent: Thursday, February 26, 2015 2:19 AM Subject: Re: [JAWS-Users] Uninstalling Jaws If you are running JAWS and Open Book, or JAWS and Magic, then this is where your shared components come into play. two Freedom Scientific products can share some of the same components of one's installation. Therefore, if you have two of these installed on your computer, and you uninstall the shared components when uninstalling, say, JAWS, then Open Book will not work properly. Mike mike@comcast.net Best regards, Michael Boyd mikeboy...@outlook.com (985) 856-6135 -Original Message- From: Alan Robbins Sent: Wednesday, February 25, 2015 11:09 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Uninstalling Jaws Trish, I do not believe it really makes a difference. The important thing is whether you want to uninstall the shared components. Personally, I always choose no to this because if there are other programs relying on those shared components they will not work correctly. If anyone else on the list has other information, or does not find what I am saying correct, please
[JAWS-Users] Installation Problems With JAWS 16
Hi, I currently have a JAWS 15 license. I ran the JAWS 16 beta with no problems and I plan to upgrade to JAWS 16 when money allows. In the meantime, I plan to just run JAWS 16 in 40 minute demo mode, when I want to use the PDF whole document OCR feature. I uninstalled the JAWS 16 beta and installed the latest regular version of JAWS 16. The install went normally but JAWS 16 will not speak. There is no error message. It just won't talk. I uninstalled it and reinstalled it with the same result. I installed the 64 bit version, which is correct for my system. Has anybody had this problem? JAWS 15 still works fine. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] JAWS14 Use with Windows8.1
Annette, I can tell you that the problem regarding not being able to read the contents of a Excel 2010 cell when in edit mode also exists in JAWS 16. I have had that problem for years, even back to JAWS 8 or 9 and Excel 2003 running under XP. FS just says that it is a known issue but they don't appear to be interested in fixing it. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Monday, February 2, 2015 10:25 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] JAWS14 Use with Windows8.1 Are there any known issues with using JAWS14 with Windows 8.1? Unfortunately, JAWS16 has not been approved in my work environment and I've got some JAWS users who have been moved over to Windows8.1 and are experiencing problems. None of them are experiencing the same problems. FS has been contacted in each situation and has told the user and the IT rep that there is no way to resolve the problem other than moving to JAWS16. IT is convinced that because no 2 users are experiencing the exact same problem, that the issues can be resolved and there is no need for JAWS16. Some problems that have been experienced are: . Inability to use Alt plus a number key to read header info in an open Outlook2010 e-mail message . Unable to navigate the Outlook2010 calendar . Unable to read the contents of an Excel2010 cell after using the F2 to enter into Edit mode of that cell . Many problems with using spell checker in MS-Word2010. Are there any known problems like the ones listed above that can be attributed to the use of JAWS14 that can only be resolved by moving to JAWS16? Are there any other issues not listed here that can only be resolved by moving to JAWS16? Thanks, Annette For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] HD Checking Software
Hi, Can anyone recommend any good hard drive checking software that works well with JAWS? A while ago, I had some files disappear and then reappear about a month later. I have had no other trouble but, still, it has me a little worried that my HD may be headed south. The built in Windows checker says that everything is fine but I would like to perhaps test it a little more thoroughly. Running JAWS 15 and Windows 8.1. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Windows Tablets With 1 Gig Of Ram
Hi, These days, there are a lot of very inexpensive Windows 8 tablets out there. The ones that I have seen that are around $100 have only one gig of Ram, which seems very light for Win 8. Have any of you used JAWS on a Win 8 tablet with only a gig of RAM and, if so, how was performance? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] [Bulk] Re: question about editing data in excel 2013 with jaws 16
Hi, I have had this issue for years with Excel 2003 and 2010, running various versions of JAWS on different systems running XP, Vista, Win 7, and Win 8. I have found no work around that is consistently reliable. Sometimes unloading and reloading JAWS will help temporarily. One solution is to copy the formula into notepad, edit it there, and copy it back to the cell. I have reported to FS. They say that it is a known issue but no word as to when it might be fixed. I would say that they are in no hurry as I have encountered this problem at least back to JAWS 8 or 9. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Johna Lynn Nordin Sent: Thursday, January 15, 2015 9:31 AM8. To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] [Bulk] Re: question about editing data in excel 2013 with jaws 16 It's already checked -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Dave Carlson Sent: Thursday, January 15, 2015 10:22 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] [Bulk] Re: question about editing data in excel 2013 with jaws 16 Try this: Tools/Options Advanced Category Editing Options Allow editing directly in cell Dave Carlson Oregonian, woodworker, and pioneer - Original Message - From: Lisle, Ted (CHFS DMS) ted.li...@ky.gov To: jaws-users-list@jaws-users.com Sent: Thursday, January 15, 2015 05:12 AM Subject: [Bulk] Re: [JAWS-Users] question about editing data in excel 2013 with jaws 16 What OS? I haven't seen that kind of behavior since JAWS 12, but I've been a wee bit paranoid ever since. I've checked Excel and Access on my home Windows 7 Pro system, and both seem to work okay. Come to think of it, I think Access was the problem child on 11 and 12; I was using XP at the time at both home and work. Ted -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Johna Lynn Nordin Sent: Wednesday, January 14, 2015 4:25 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] question about editing data in excel 2013 with jaws 16 Hello All, I have excel 2013 and jaws 16 and am trying to edit information in cells in an excel file. I have maximized the window and hit the f2 key to read and edit data and jaws does not read anything in the cell once I've clicked f2. How can I get jaws to read what's in the cell? All jaws says to me is blank no matter what I do. I move with the arrow keys I try the read all commands and nothing works. Please help Johna For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] For The List Owner
Happy Birthday -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Jerrie Toney Sent: Monday, January 05, 2015 5:48 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] For The List Owner Happy Birthday! -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Ferrin Sent: Monday, January 05, 2015 4:21 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] For The List Owner Mike, you never stop embarrassing me at every chance you get. Oh what am I going to do with you? David Ferrin A complex system that does not work is invariably found to have evolved from a simpler system that worked perfectly. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike B. Sent: Monday, January 05, 2015 1:12 PM To: Jaws-Users List Subject: [JAWS-Users] For The List Owner Hi All, Running XP Pro, Outlook Express, J13. Today is a very special day in our list owners life! Today is Señor David Ferrin's birthday! Will you all join keyboards with me to wish David the VERY HAPPIEST of BIRTHDAYS! Happy Birthday Amigo, have a GREAT day. Take care. Mike This email was sent from my, iBarstool. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] updating from windows 8.0 to 8.1
Hi, In my case, it eventually got tired of me clicking remind me later and it went ahead and downloaded it and installed it. One day, I was working in a Word document and, all of a sudden, JAWS said please wait while your computer is upgraded to Windows 8.1 or something to that effect. Thankfully, my wife was around and she completed the upgrade process for me because, as has been said, it is not accessible. I know that many people like 8.1 but, personally, I find my computer, which came with Windows 8, to be less stable after the upgrade to 8.1. I wish it had given me a choice about updating. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike Boyd Sent: Wednesday, December 3, 2014 11:21 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] updating from windows 8.0 to 8.1 Hi Anna, Unless Microsoft has changed the upgrade process since Windows 8.1 was first released, I found the upgrade to be impossible. The upgrade evidently uses the Microsoft Store metro app, which is inaccessible, and once I clicked on Get It Now, that's as far as I got. From this point on, JAWS will read nothing, and there is no way of knowing where you are at. I resorted to the Microsoft Accessiblity Support Group to help me get it installed. I also always had trouble with it after the upgrade, and ended up buying a new laptop with 8.1 installed on it, I have liked it since then, no problems. My old computer, I reverted it back to Windows 7. This is just my experience, but I do know many people had trouble getting the update. Mike, blindb...@comcast.net -Original Message- From: anna vimini Sent: Wednesday, December 03, 2014 1:03 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] updating from windows 8.0 to 8.1 Hi all using windows 8.0 I keep getting a reminder to update to windows 8.1 and I always choose remind me later because I am not sure how to do this . Is it easy to do and do I have to do anything after I press the okay button or once I press the okay button will it do it on its own I am using windows 8.0 and jaws 15 latest Thanks in advance For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Jaws Freezup when word-count checking
This sometimes happens to me too. Thankfully, for me, it doesn't do this all the time. Once it starts doing it, I have to restart the computer to get it to stop doing it. Then, it may go a few hours or a few days or a few weeks before it does it again. Then, when it does it, it will do it every time that I do a word count, until I restart the computer. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Nicole Valicia Thompson-Andrews Sent: Tuesday, December 2, 2014 1:20 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Jaws Freezup when word-count checking Jaws freezes when I go to check msword word count. Is there a remedy? -- Pen Name: Mellissa Green Twitter @abluegreenunivs website www.abluegreenuniverse.com For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Making Folder In Windows 8.1
Hi Everyone, In Windows 8, in Windows Explorer, I would create a folder by pressing the alt key to open the ribbon, then pressing tab twice (which would place me on the new folder button), and pressing the space bar. I have recently updated to Windows 8.1 and, now, pressing the tab key after pressing alt doesn't take me anywhere. Is something different about this in windows 8.1 or have I accidently changed something somewhere? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Dropping Wifi Connection
Hi, After updating my HP Envy from Windows 8 to 8.1, my wifi connection frequently drops when I put the computer to sleep or shut it down. When this happens, I just reestablish the connection and everything works fine. This happens probably about half the time. Is there a way to keep the connection from dropping? I very seldom had this problem before updating. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Missing Files
Hi Everyone, I have a little mystery here. I hope the list can help me to solve it. I have a HP Envy, running Windows 8.1 and JAWS 16. I just had about 50 or so files to just up and disappear. The actual disappearance isn't a big deal. All of the files were MP3s, ripped from CD. I back up regularly and I just restored them from the latest backup. However, it worries me that they disappeared in the first place. As far as I can tell, the files were not hidden, they were just gone. Norton gives me a clean bill of health and, anyway, I wouldn't think that a virus would mess with only 50 user files out of 50,000. All of these particular files were ripped on the same day, about six months ago. As they were all ripped back to back and my HD has very low fragmentation, I assume that they were stored roughly sequentially on the HD. This has me wondering if I have a HD sector going bad, although the Windows disk checking tool shows that the HD is OK. I did update to Windows 8.1 a couple weeks ago but I wouldn't think that the update would have anything to do with this. Seems to me that the most likely explanation is a HD starting to go south. I've been planning on switching to a SSD anyway but didn't want to spend the money just yet. Anyone have any thoughts as to what the problem may be or how I can investigate further? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] JAWS16 fails to read MS Word documents and Excel cell entries while JAWS 15 does
Hi, Not sure about the difficulty that you are experiencing in Word. However, in Excel, when using F2 to edit the cell's contents, I have often had trouble with JAWS not reading text that the cursor passes over. I have had problems with this for years, going back several JAWS versions and going back to Excel 2003 (I am currently using Excel 2010). I have reported it to FS. They say that it is a known issue but they haven't fixed it yet. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Dujari, Prateek Sent: Thursday, November 13, 2014 11:10 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] JAWS16 fails to read MS Word documents and Excel cell entries while JAWS 15 does Hello gang. I've both the latest JFW15 and JFW16 on my Win8 64bit PC. I consistently notice that JFW 16 fails to read content in my MS Word documents while JFW15 consistently and reliably is able to read them. Ditto behavior when trying to read entries in an MS excel sheet cell by hitting F2 to read the entry. These are the same documents in Word and Excel that I've observed the diff in behavior between JFW15 and 16. What's going on and do you have a solution to offer? Prateek For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Updating to Windows 8.1
Hi Everyone, I am running the JAWS 16 beta with Windows 8. I have not yet updated to Windows 8.1. I have nothing against Windows 8.1 but I'm doing fine with Windows 8 and just haven seen the point. You know, if it isn't broke, don't fix it. My computer has been occasionally asking me if I want to update but now it has apparently gone ahead and downloaded the update but just hasn't installed it because, every time I boot up the computer now, it asks me if I want to update to 8.1 and restart. I can't close the window but I've been just leaving it in the background for the last couple days. I'm thinking about going ahead and updating just so the computer will leave me alone about it. Is there any disadvantage to updating? Is anybody having any significant problems with JAWS and Windows 8.1? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] When Using total recorder, jaws is recorded along with internet stream, how can I prevent this?
Hi I am Using total recorder 8.5 professional on a laptop, when hitting record in total recorder then going to the internet feed link I want to record but then when playing back recording jaws is also captured in recording . on my old desktop ,recording would only start when stream started. How can I fix this? contacted total recorder by email ( only way to get support for total recorder)and they sent me direction when I followed them but it did not work. is it a driver issue? Regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] jaws sixteen
Hi Eric, I did use the merge utility going from 15 to 16. Can I expect any problems from that or is the merge utility just not recommended for those with older versions? Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Eric Damery Sent: Friday, September 19, 2014 8:52 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] jaws sixteen It will not, and we strongly suggest you avoid using the Merge Utility at this time. Please make the changes you like within JAWS 16. Eric -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Friday, September 19, 2014 9:48 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] jaws sixteen Yes, if you run the merge utility Al -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of LeDon Sent: Friday, September 19, 2014 9:42 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] jaws sixteen If I download and install jaws sixteen beta to see if I like the new release, will jaws sixteen retain all of my jaws fourteen settings? For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] an ILM question
Hey David, Yes, Eric addressed this on FS-cast a week or two ago. It is my understanding that, starting with JAWS 16, JAWS standard will work with pro versions of Windows. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Ferrin Sent: Wednesday, September 17, 2014 10:27 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] an ILM question Just curious for somebody who is using ILM and has already reverted back to the standard license of JAWS. Can you still use your system on any flavor of windows professional? I use ILM on my lap top but have not taken the plunge as of yet. David Ferrin A complex system that does not work is invariably found to have evolved from a simpler system that worked perfectly. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] JAWS With BraillePen12
Hi Everyone, Does anyone on the list have any experience using the BraillePen12 with JAWS? I have JAWS 15 and am running the JAWS 16 beta. I recently got a BraillePen12. So far, I have only used it with my iPhone. I was thinking about trying it out with JAWS. The manufacturer says that it will work with JAWS15 and later but it is not listed as a supported display in the JAWS documentation. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Want to find SAPI4 speech engine
Here is one place that I found where you can get it. http://www.nextup.com/sapi.html HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mario Brusco Sent: Thursday, August 21, 2014 9:50 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Want to find SAPI4 speech engine when I tried some years ago, I had no luck. I searched high and low, but couldn't find it. all the links I found were dead. sorry, but maybe someone has a copy or can say where to get it. - Original Message - From: Arianna Calesso acale...@centurylink.net To: jaws-users-list@jaws-users.com Sent: Thursday, August 21, 2014 9:36 AM Subject: [JAWS-Users] Want to find SAPI4 speech engine The subject line says what I'm looking for. I've tried to find it, but just can't seem to locate it. Please, can someone help? Arianna For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Battery Not Charging
Hi, My HP laptop also sometimes has this issue, ever sense it was new. Usually this happens when the battery is already above 90% and I try to charge it. I just unplug it and let it run off the battery until it is below 90% and then I plug it back in and it will charge on up to 100%. I assume that it has something to do with the smart management of the charging cycle. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Graham Smith Sent: Wednesday, July 23, 2014 8:28 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Battery Not Charging I have an HP laptop and the battery is not being charged anymore. When I press insert f11 it shows battery is pluggen in but not charging, anyone any ideas if I can resolve this or is it probably a battery or laptop component failure? Regards Graham For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Reinstalling Office 2010
Hi Everyone, I am using Windows 8 and latest version of JAWS 15. I have Office 2010. Lately, Outlook is worse than usual about crashing and I'm occasionally getting an error message from Word which requires me to reboot the computer (more about that later). I have thought about reinstalling Office. My concern is that I have no activations left. That being the case, can I successfully reinstall it? Will it see that it was previously already activated on this computer and not require reactivation? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Computer Crashing
Hi Everyone, I am running latest build of JAWS 15 on a Windows 8 laptop (HP Envy). It has started crashing frequently. JAWS crashes are nothing new but when this happens, I just dump and reload JAWS and keep going. However, three or four times in the last couple days, speech has stopped and a JAWS dump and reload did not work. I also couldn't start Narrator or WindowEyes. I ended up just turning the computer off and back on. When it did this just a few minutes ago, before I turned the computer off, I got my daughter, who is sited, to look at it. She said that there were two mice on the screen. One was frozen and one would move but you couldn't click on anything with it and keyboard input had no effect. Does anyone have any ideas about what may be going on? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Internet Speed Test Disparities
Hi, I ran the same test twice, back to back, and got 17.1mbps and 8.9mbps, only about 30 seconds apart. I could be wrong but I suspect that the reading is accurate and that the connection speed fluctuates. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Gerald Levy Sent: Friday, July 4, 2014 12:23 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Internet Speed Test Disparities Using information gleaned from this list and other sources, I ran Internet speed tests from three different sites and got threewidely different results. At http://i.dslr.net/iphone_speedtest.htmlmy my download speed measured 660 kbps. At http://www.2wire.com/?p=7 my download speed measured 258 kbps. And at http://testmy.net/upload my download speed measured an impressive 8.7 mbps. What's going on with all these speed tests? I realize that each speed test uses its own propriatary method of testing Internest speeds, but why is there such a huge disparity among the results? Is it possible that none of these speed tests is accurate, and that all such speed tests are bogus? According to Verizon, my current DSL download speed is supposed to be between 768kbps and 1mbps, which will supposedly be upgraded to 3.1 mbps to 7.8 mbps next Tuesday. The result from the IPhone speed test at 660 kbps would seem to be closest to what I'm currently getting, but how can I know for sure whether any of these tests is reliable or accurate? Gerald For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] How do you access a tab in Microsoft 2007 excel spreadsheet using Jaws 12
Hi don't know if this works in2013. Credit goes to Annette . Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Monday, February 24, 2014 8:41 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] How do you access a tab in Microsoft 2007 excel spreadsheet using Jaws 12 I think you are saying that the workbook has multiple worksheets in it and you want to get into another worksheet in the workbook, and if this is correct do the following: Control+Shift+S to open a JAWS dialog box listing all of the worksheets Control+Shift+in that workbook. If my memory is correct, your focus will be on the worksheet at the top of the list. This list has the first worksheet at the top and the last worksheet at the bottom. It does not matter what worksheet you were just working in, every time you open this JAWS dialog box your focus will be at the top of the list. Use your up and down arrow keys to move to the worksheet you want and press enter to open it. HTH, Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Monday, February 24, 2014 2:12 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] How do you access a tab in Microsoft 2007 excel spreadsheet using Jaws 12 Hi I was sent a spreadsheet with a tab on the bottom with additional information. How do I access it using Jaws12? Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Jaws Facebook and pal talk and outlook scripts
Is there a script for Facebook outlook 2013 and Pal talk on the web page. I didn’t seen to locate one. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] out of table mode
Hi, I'm not sure exactly what you mean out of its table mode. If you have a table on a webpage, you can copy it into Word or into Excel and then do various things with it. For example, I just had a webpage table of contact info from which I needed to extract E-mail addresses for a group message. I copied the table into Excel. I then copied just the E-mail column and pasted that into Word. I then did a search and replace and replaced all the carriage returns with a semicolon and a space. I now have my list of E-mail addresses that I can paste into the send field of my E-mail. Sometimes you just have to get kind of creative. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of t. conley Sent: Tuesday, June 24, 2014 2:45 PM To: jul Subject: [JAWS-Users] out of table mode I ask again, can someone tell me how to get a pasted chart out of it's table mode? win 7, jaws 12 For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] jaws and dragon speak
What is the best program to use for interfacing these two program? I am looking to use Jaws and Dragon speak at the same time For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] question about Second Life virtual viewer
Im surprised they work at all cause sl is visual based -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of shoshana hathaway Sent: Monday, May 12, 2014 11:12 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] question about Second Life virtual viewer Hi, I don't know if there are any here who use Second Life. I'm learning how, and someone from their virtual ability group (a wonderful bunch of incredibly helpful people!) recommended that I download a 3rd party virtual viewer called the Radigast viewer. I went to the site, but when I tried to download the viewer, AVG yelled at me, and said there was a threat. I'm wondering if anyone else has this, what the threat might be, and if I should ignore it or find something else. The viewer SL provides doesn't play very well with JAWS, and I understand that the Radigast viewer work well with it. Thanks, Shoshana For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Internet and E-mail Problems
Hi, I am using the latest build of JAWS 15 and Windows 8. I am having some E-mail and internet problems and I would like to know if any of you have any idea what is going on and how to fix it. I have three E-mail accounts, all hosted by Xeran, which is my web host. All three accounts are set up in outlook 2010. Sometimes, when I start my computer, the new E-mails will not show up for one of the accounts. It is always the same account. Restarting Outlook does not fix the problem but restarting the computer does fix it and the problem will remain fixed for as long as the computer is running, at least until the next shutdown and restart. This problem is intermittent. It is more frequent than it used to be. It will happen at least once per week and sometimes, for a while, it will happen every day. The other problem is that, sometimes, when I start the computer, I will not have internet access in Internet Explorer 10, though other programs, like Outlook, can access the internet. Again, to fix the problem, I have to restart the computer. This usually doesn't happen at the same time as the E-mail problem. Both of these problems happen rather I am on wifi or on a wired network connection. Any ideas? This is getting very frustrating. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Virtual Ribbon verses Microsoft Ribbons
Hi, I use virtual ribbons. I can, and sometimes do, use the regular ribbons when using other screen readers. However, I find the virtual ribbons much less confusing and so, when I am using JAWS, which is most of the time, I do use the virtual ribbon feature. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Pinky Sent: Tuesday, March 25, 2014 12:56 PM To: JAWS-Users-List 2 Subject: [JAWS-Users] Virtual Ribbon verses Microsoft Ribbons Hi Jaws users, Is it easier to use the virtual ribbon in jaws as to just using the Microsoft ribbons? I would like opinions from all you Jaws users as to which way you have your pc setup. Which one is easier to use. Ed For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] JAWS Volume
Hi Everyone, Recently, a couple times right after booting the computer, I have noticed that my JAWS volume was too low relative to all other sounds. In both cases, a restart of JAWS had no effect but rebooting the computer fixed the problem. Has anyone else run into this? Using JAWS 15 and Windows 8. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] 2007 Excel column move question.
Hi sherrie truer words have not been spoken Scott. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Sherrie Gosling Sent: Wednesday, March 12, 2014 6:43 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Excel column move question. Just a thought. I always do a save before I start making any major changes to my spreadsheets. That way if it screws up or doesn't work I can go back to my last saved version. Hope this helps, Sherrie GoslingSent from Sherrie's iPhone On Mar 12, 2014, at 11:41 AM, Brian Lee brianl...@charter.net wrote: Hello Scott, Select the column you want to move by using CTRL+Spacebar. Cut the column by using CTRL+X. Move to the column currently after the Names column and use the insert command of CTRL+Shift+=. The column being moved should appear between the Names column and the column that previously followed the Names column. I hope it works for you. Take care.. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Wednesday, March 12, 2014 6:16 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] 2007 Excel column move question. Hi Can you move columns in a worksheet so they are in the order you want them in? if not what do you suggest? have a spreadsheet from someone else that addresses are not near names wanted to move them to right after the name column. Regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] 2007 Excel column move question.
Hi Brian Thanks but I get a error message saying the cell is not big enough . Thoughts? was it my imagination that you could do a column move in 2003 excel by selecting move? Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Wednesday, March 12, 2014 11:41 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Excel column move question. Hello Scott, Select the column you want to move by using CTRL+Spacebar. Cut the column by using CTRL+X. Move to the column currently after the Names column and use the insert command of CTRL+Shift+=. The column being moved should appear between the Names column and the column that previously followed the Names column. I hope it works for you. Take care.. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Wednesday, March 12, 2014 6:16 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] 2007 Excel column move question. Hi Can you move columns in a worksheet so they are in the order you want them in? if not what do you suggest? have a spreadsheet from someone else that addresses are not near names wanted to move them to right after the name column. Regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] 2007 Excel column move question.
Hi Can you move columns in a worksheet so they are in the order you want them in? if not what do you suggest? have a spreadsheet from someone else that addresses are not near names wanted to move them to right after the name column. Regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula
Hi Brian That did the trick. column was in date format . knew it had to be something easy if you knew what you were looking for, like you did. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Saturday, March 01, 2014 10:34 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Also, it is not CTRL+F1 as I mistakenly typed. It is CTRL+1 that brings up the formatting dialog box. Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Saturday, March 1, 2014 7:15 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hello Scott, One more comment is that using CTRL+Shift+1 changes the cell formatting to the numbering format using two decimal places. Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Saturday, March 1, 2014 5:32 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi Brian no go , cell says 1-0-1900 the next cell down says 1-1-1900 tried both ways you suggested. the second question was solved by doing a =m2 . it is a mystery Thanks Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Saturday, March 01, 2014 7:24 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hello Scott, Use the formula =sum(h2,k2,l2) There should be no spacing in the formula. You had a space after h2. A comma follows h2 and k2 but not l2. No plus signs are used in that formula. You could also just type =h2+k2+l2 again without using the word sum and with no spacing and no parentheses or commas just a plus sign between h2 and k2 and another one between k2 and l2. I am not sure what you mean with the second part of your question. You can copy the content of a cell with CTRL+C and paste it in another empty cell. I don't think that is what you are meaning though. Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Saturday, March 1, 2014 1:12 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi trying to add 3 colums put in =Sum(H2 +k2+L2) and I get #value in cell also want to put a number that is in a colum in another colum put =Sum(M2)That just showed the formula.What am I doing wrong? regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] 2007 Microsoft Excel Questions about formula
Hi trying to add 3 colums put in =Sum(H2 +k2+L2) and I get #value in cell also want to put a number that is in a colum in another colum put =Sum(M2)That just showed the formula.What am I doing wrong? regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula
Hi Pedro my cells are not in consective order so that is why I did + sign. I get 11 08 11 when I use : any other suggestions. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Pedro Romero Sent: Saturday, March 01, 2014 4:28 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi Scott. Here is what works for me. I am using Excel 2007. If I want to add the sum of cells K1 through K5, do the following. =sum(k1:k5) Note: it may help to read this formula character by character to hear where the colons and parentheses are. Hope this helps. Pete - Original Message - From: Scott Meyer scottt.me...@verizon.net To: jaws-users-list@jaws-users.com Sent: Saturday, March 01, 2014 1:11 PM Subject: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi trying to add 3 colums put in =Sum(H2 +k2+L2) and I get #value in cell also want to put a number that is in a colum in another colum put =Sum(M2)That just showed the formula.What am I doing wrong? regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula
Hi Pedro Thanks. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Pedro Romero Sent: Saturday, March 01, 2014 5:02 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Sorry! I didn't realize that the cells were not in consecutive order. If I can figure out how to add non-contiguous cells or columns, I'll be sure to let you know. Take care. Pete - Original Message - From: Scott Meyer scottt.me...@verizon.net To: jaws-users-list@jaws-users.com Sent: Saturday, March 01, 2014 1:48 PM Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi Pedro my cells are not in consective order so that is why I did + sign. I get 11 08 11 when I use : any other suggestions. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Pedro Romero Sent: Saturday, March 01, 2014 4:28 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi Scott. Here is what works for me. I am using Excel 2007. If I want to add the sum of cells K1 through K5, do the following. =sum(k1:k5) Note: it may help to read this formula character by character to hear where the colons and parentheses are. Hope this helps. Pete - Original Message - From: Scott Meyer scottt.me...@verizon.net To: jaws-users-list@jaws-users.com Sent: Saturday, March 01, 2014 1:11 PM Subject: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi trying to add 3 colums put in =Sum(H2 +k2+L2) and I get #value in cell also want to put a number that is in a colum in another colum put =Sum(M2)That just showed the formula.What am I doing wrong? regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula
Hi pedro still get a date in cell, copied your formula and just changed reference cells. a mystery. Thanks Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Pedro Romero Sent: Saturday, March 01, 2014 5:41 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula If you want to add nonconsecutive cells you might try this. I just did it and it worked. =SUM(A1,A3,A5) Pete - Original Message - From: Scott Meyer scottt.me...@verizon.net To: jaws-users-list@jaws-users.com Sent: Saturday, March 01, 2014 2:35 PM Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi Pedro Thanks. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Pedro Romero Sent: Saturday, March 01, 2014 5:02 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Sorry! I didn't realize that the cells were not in consecutive order. If I can figure out how to add non-contiguous cells or columns, I'll be sure to let you know. Take care. Pete - Original Message - From: Scott Meyer scottt.me...@verizon.net To: jaws-users-list@jaws-users.com Sent: Saturday, March 01, 2014 1:48 PM Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi Pedro my cells are not in consective order so that is why I did + sign. I get 11 08 11 when I use : any other suggestions. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Pedro Romero Sent: Saturday, March 01, 2014 4:28 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi Scott. Here is what works for me. I am using Excel 2007. If I want to add the sum of cells K1 through K5, do the following. =sum(k1:k5) Note: it may help to read this formula character by character to hear where the colons and parentheses are. Hope this helps. Pete - Original Message - From: Scott Meyer scottt.me...@verizon.net To: jaws-users-list@jaws-users.com Sent: Saturday, March 01, 2014 1:11 PM Subject: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi trying to add 3 colums put in =Sum(H2 +k2+L2) and I get #value in cell also want to put a number that is in a colum in another colum put =Sum(M2)That just showed the formula.What am I doing wrong? regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ Hope this works. Pete For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula
Hi Brian no go , cell says 1-0-1900 the next cell down says 1-1-1900 tried both ways you suggested. the second question was solved by doing a =m2 . it is a mystery Thanks Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Saturday, March 01, 2014 7:24 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hello Scott, Use the formula =sum(h2,k2,l2) There should be no spacing in the formula. You had a space after h2. A comma follows h2 and k2 but not l2. No plus signs are used in that formula. You could also just type =h2+k2+l2 again without using the word sum and with no spacing and no parentheses or commas just a plus sign between h2 and k2 and another one between k2 and l2. I am not sure what you mean with the second part of your question. You can copy the content of a cell with CTRL+C and paste it in another empty cell. I don't think that is what you are meaning though. Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Saturday, March 1, 2014 1:12 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] 2007 Microsoft Excel Questions about formula Hi trying to add 3 colums put in =Sum(H2 +k2+L2) and I get #value in cell also want to put a number that is in a colum in another colum put =Sum(M2)That just showed the formula.What am I doing wrong? regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Total recorder 8.4 and line in issue How to hear what playing on no speaker external device.
HI Al yes, have pro version, have not tried it yet. Having problems with cassette. Thanks for all your help. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Wednesday, February 26, 2014 8:00 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue How to hear what playing on no speaker external device. Scott, Thanks, looked for this but could not find. Checked and I only have standard edition, which meets my needs for recording Skype calls. Have you got the pro version and did this fix work? Al -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Tuesday, February 25, 2014 9:59 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issueHow to hear what playing on no speaker external device. Hi Emailed Total recorder and here is what they said. Hello Scott Meyer, I hooked up the cassette player using the headphone jack (the only line out available to me)to the line in of my laptop computer. If your record player has no line-out jack and is connected to your PC soundcard with a headset jack, then most probably you will need to use a pre-amp or connect your LP player to microphone line of your soundcard (instead of line-in). but I can not hear what is being recorded. IN Professional Edition hit the Listen while capturing button (Volume and Level Panel). This button turns on/off the listen-while-capturing mode. When the mode is on, all sound captured from the sound board is sent to your speakers. Regards, High Criteria Support Team. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Sunday, February 23, 2014 8:32 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Scott, Glad it is working. Not sure about hearing what you are recording as well but if you poke around a bit in some of the settings there may be a check box or something that says allow monitoring or something like that. This may allow that. The other alternative I could think of, but now you are getting into more cost, is running things through a mixer which allows various input and output device running simultaneously. I'll look a bit and see if I can find a way next time I'm in Total Recorder Also, I believe you can upgrade to 8.5 at no charge, not that this will make a difference in your current concern. Best, Al -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Saturday, February 22, 2014 8:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Hi Allan it worked, Thanks, do you know how to hear what is playing, plugged in headphones in laptop and still hear nothing. Cannot use headphone jack in cassette because that is what I am using as a output source. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Friday, February 21, 2014 8:08 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Scott, I have Total Recorder 8.5 but I think you want to select line in as your recording input. Do you have that in the list of choices? Al Check out the new blind Handyman list at: http://cruising.ultragroups.com/mailman/listinfo/blindhandyman_cruisin g.ultragroups.com -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Friday, February 21, 2014 7:20 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Total recorder 8.4 and line in issue Hi using jaws 12 , total recorder 8.4 professional and a Samsung laptop. I want to record a cassette onto my computer (have done this with a desktop)using the microphone line (only output line available) put jack into line in on Laptop and hit play and record on Total recorder( no sound) but when I played back recording all I hear is jaws commands. like I said I did this with a desktop and never got jaws output in the recording and did not have two sound cards. What setting do I need to change . It is on software. Regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http
Re: [JAWS-Users] Total recorder 8.4 and line in issueHow to hear what playing on no speaker external device.
Hi Emailed Total recorder and here is what they said. Hello Scott Meyer, I hooked up the cassette player using the headphone jack (the only line out available to me)to the line in of my laptop computer. If your record player has no line-out jack and is connected to your PC soundcard with a headset jack, then most probably you will need to use a pre-amp or connect your LP player to microphone line of your soundcard (instead of line-in). but I can not hear what is being recorded. IN Professional Edition hit the Listen while capturing button (Volume and Level Panel). This button turns on/off the listen-while-capturing mode. When the mode is on, all sound captured from the sound board is sent to your speakers. Regards, High Criteria Support Team. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Sunday, February 23, 2014 8:32 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Scott, Glad it is working. Not sure about hearing what you are recording as well but if you poke around a bit in some of the settings there may be a check box or something that says allow monitoring or something like that. This may allow that. The other alternative I could think of, but now you are getting into more cost, is running things through a mixer which allows various input and output device running simultaneously. I'll look a bit and see if I can find a way next time I'm in Total Recorder Also, I believe you can upgrade to 8.5 at no charge, not that this will make a difference in your current concern. Best, Al -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Saturday, February 22, 2014 8:38 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Hi Allan it worked, Thanks, do you know how to hear what is playing, plugged in headphones in laptop and still hear nothing. Cannot use headphone jack in cassette because that is what I am using as a output source. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Friday, February 21, 2014 8:08 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Scott, I have Total Recorder 8.5 but I think you want to select line in as your recording input. Do you have that in the list of choices? Al Check out the new blind Handyman list at: http://cruising.ultragroups.com/mailman/listinfo/blindhandyman_cruisin g.ultragroups.com -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Friday, February 21, 2014 7:20 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Total recorder 8.4 and line in issue Hi using jaws 12 , total recorder 8.4 professional and a Samsung laptop. I want to record a cassette onto my computer (have done this with a desktop)using the microphone line (only output line available) put jack into line in on Laptop and hit play and record on Total recorder( no sound) but when I played back recording all I hear is jaws commands. like I said I did this with a desktop and never got jaws output in the recording and did not have two sound cards. What setting do I need to change . It is on software. Regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] How do you access a tab in Microsoft 2007 excel spreadsheet using Jaws 12
Hi I was sent a spreadsheet with a tab on the bottom with additional information. How do I access it using Jaws12? Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] How do you access a tab in Microsoft 2007 excel spreadsheet using Jaws 12
Hi Annette; you were right on the mark in deciphering my request. your instructions worked like a charm. Thanks Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Monday, February 24, 2014 8:41 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] How do you access a tab in Microsoft 2007 excel spreadsheet using Jaws 12 I think you are saying that the workbook has multiple worksheets in it and you want to get into another worksheet in the workbook, and if this is correct do the following: Control+Shift+S to open a JAWS dialog box listing all of the worksheets Control+Shift+in that workbook. If my memory is correct, your focus will be on the worksheet at the top of the list. This list has the first worksheet at the top and the last worksheet at the bottom. It does not matter what worksheet you were just working in, every time you open this JAWS dialog box your focus will be at the top of the list. Use your up and down arrow keys to move to the worksheet you want and press enter to open it. HTH, Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Monday, February 24, 2014 2:12 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] How do you access a tab in Microsoft 2007 excel spreadsheet using Jaws 12 Hi I was sent a spreadsheet with a tab on the bottom with additional information. How do I access it using Jaws12? Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Total recorder 8.4 and line in issue
Hi Allan Will look around for that. I will let you know how I make out. Thanks Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Friday, February 21, 2014 8:08 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Scott, I have Total Recorder 8.5 but I think you want to select line in as your recording input. Do you have that in the list of choices? Al Check out the new blind Handyman list at: http://cruising.ultragroups.com/mailman/listinfo/blindhandyman_cruisin g.ultragroups.com -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Friday, February 21, 2014 7:20 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Total recorder 8.4 and line in issue Hi using jaws 12 , total recorder 8.4 professional and a Samsung laptop. I want to record a cassette onto my computer (have done this with a desktop)using the microphone line (only output line available) put jack into line in on Laptop and hit play and record on Total recorder( no sound) but when I played back recording all I hear is jaws commands. like I said I did this with a desktop and never got jaws output in the recording and did not have two sound cards. What setting do I need to change . It is on software. Regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Total recorder 8.4 and line in issue
Hi Allan it worked, Thanks, do you know how to hear what is playing, plugged in headphones in laptop and still hear nothing. Cannot use headphone jack in cassette because that is what I am using as a output source. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Friday, February 21, 2014 8:08 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Total recorder 8.4 and line in issue Scott, I have Total Recorder 8.5 but I think you want to select line in as your recording input. Do you have that in the list of choices? Al Check out the new blind Handyman list at: http://cruising.ultragroups.com/mailman/listinfo/blindhandyman_cruisin g.ultragroups.com -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Meyer Sent: Friday, February 21, 2014 7:20 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Total recorder 8.4 and line in issue Hi using jaws 12 , total recorder 8.4 professional and a Samsung laptop. I want to record a cassette onto my computer (have done this with a desktop)using the microphone line (only output line available) put jack into line in on Laptop and hit play and record on Total recorder( no sound) but when I played back recording all I hear is jaws commands. like I said I did this with a desktop and never got jaws output in the recording and did not have two sound cards. What setting do I need to change . It is on software. Regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Total recorder 8.4 and line in issue
Hi using jaws 12 , total recorder 8.4 professional and a Samsung laptop. I want to record a cassette onto my computer (have done this with a desktop)using the microphone line (only output line available) put jack into line in on Laptop and hit play and record on Total recorder( no sound) but when I played back recording all I hear is jaws commands. like I said I did this with a desktop and never got jaws output in the recording and did not have two sound cards. What setting do I need to change . It is on software. Regards Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] H and R Block Website
Hi Everyone, I am trying to use H and R Block's free file online service. I have used this service for several years with no problems. However, this year, after I log in, the webpage keeps crashing before I can even get started filling in my information. I tried turning on compatibility view, which did not help. Does anyone have any suggestions? I am using latest build of JAWS 15 with Windows 8 and Internet Explorer 10. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] jaws 15 bug? protective mode word 2013
If I am not mistaken, you have to do that with all versions of JAWS and Office. Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of dan Sent: Friday, February 7, 2014 1:16 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] jaws 15 bug? protective mode word 2013 hi all, not sure whether this is a bug? in word 2013 when protective mode is enabled jaws 15 remains silent when reviewing documents with the arrow keys. work around: disable protective mode. please report this to the relevant contacts at jaws HQ cheers dan For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] office 2007 excel question.
HI Brian Thanks for the instructions, they worked perfectly. Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Monday, December 30, 2013 2:19 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] office 2007 excel question. Hello Scott, In my message I said that you should use H followed by O followed by W to get to where you can adjust column width. I forgot to mention that you use Alt key prior to pressing H. The corrected message is below: Use Alt followed by H followed by O followed by W, type in the width you want to use and press enter key. To confirm the change you can use the JAWS key with F command and the two numbers given at the end of the information JAWS gives you will be the width and height of the current cell or selection of cells. A quick way to confirm is to hold down JAWS key and press F twice, use CTRL end in the virtual window and then up arrow a couple times to the width and height information. Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Monday, December 30, 2013 9:44 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] office 2007 excel question. Hello Scott, Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of scott Meyer Sent: Monday, December 30, 2013 9:17 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] office 2007 excel question. Hi How do you change the width of columns in 2007 office excel worksheet? Using Jaws 12. Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Removing Page Numbers From Front of Documentin Word2010
Negoslav, Thanks. Got it. I usually use the virtual ribbons but, with virtual ribbons turned on, I could not tab to the link to previous button to unpress it. I had to turn virtual ribbons off and then I could get to it. Thanks for the help. Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Negoslav Sabev Sent: Saturday, January 25, 2014 1:37 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Removing Page Numbers From Front of Documentin Word2010 You need to do the break for headers and footers separately. If you want different header and footers for odd and even pages you should break the connection for headers and footers of odd and even pages separatly also. You should continue tabbing. May be I misleded you, it is not a link. Jaws pronounces it as checkbox. It is found in the design tab, last in the navigation section, fifth one in the tab order in the section. Or you can just press alt+j+h+k. For me the hotkeys not seem to work consistently and often I alt+j+h+go to check if they worked. Negoslav - Original Message - From: Scott Duck l...@csdconsulting.biz To: jaws-users-list@jaws-users.com Sent: Friday, January 24, 2014 9:06 PM Subject: Re: [JAWS-Users] Removing Page Numbers From Front of Documentin Word2010 Negoslav, I did as you instructed; I went to the second section, showed the headers, and entered the ribbons. I tabbed and arrowed around but I did not come across link to previous. There was just header, footer, and page numbers. I went into each of these and still found no link to previous. The strange thing is that I thought that I had already broken the link to the previous section but I can't find where I did it. Can you provide more guideance? Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Negoslav Sabev Sent: Friday, January 24, 2014 10:55 AM To: jaws-users Subject: Re: [JAWS-Users] Removing Page Numbers From Front of Document in Word2010 You should go to the second section, show the headers and footers, than press alt+ to enter the ribbons. Just tab till you hear link to previous pressed. Just press enter and you should be able to modify headers and footers of the two sections separately. Sorry I don't remember the shortcuts to go there quickly. Negoslav - Original Message - From: Scott Duck l...@csdconsulting.biz To: Jaws List jaws-users-list@jaws-users.com Sent: Friday, January 24, 2014 6:22 PM Subject: [JAWS-Users] Removing Page Numbers From Front of Document in Word2010 Hello, I have a long document that I have created in Word 2010. I want page numbers to start on the seventh page of the document. I have inserted a section break at this point and broken the link to earlier pages. Page numbering does start over at page 1 on the seventh page, as it should. However, the first six pages still have page numbers 1 through 6 on them. According to a little web research, I should be able to go into the footer in the first six pages and delete the page number. When I do this, it removes all page numbers for the entire document. Does anyone know how to do what I want to do? I'm using JAWS 15 with Word 2010. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Using Jaws 12 and outlook 2007, when in spell checker it always change days of week even I believe they are capitalized..
HI When using f7 to spell check, it always asked to fix Days of the week and what day it is. Will sometimes also try to correct First names. I am typing them in capital letters to start with. Is this a jaws or outlook issue? How can I fix this? Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Removing Page Numbers From Front of Document in Word 2010
Hello, I have a long document that I have created in Word 2010. I want page numbers to start on the seventh page of the document. I have inserted a section break at this point and broken the link to earlier pages. Page numbering does start over at page 1 on the seventh page, as it should. However, the first six pages still have page numbers 1 through 6 on them. According to a little web research, I should be able to go into the footer in the first six pages and delete the page number. When I do this, it removes all page numbers for the entire document. Does anyone know how to do what I want to do? I'm using JAWS 15 with Word 2010. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Removing Page Numbers From Front of Document in Word2010
Negoslav, I did as you instructed; I went to the second section, showed the headers, and entered the ribbons. I tabbed and arrowed around but I did not come across link to previous. There was just header, footer, and page numbers. I went into each of these and still found no link to previous. The strange thing is that I thought that I had already broken the link to the previous section but I can't find where I did it. Can you provide more guideance? Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Negoslav Sabev Sent: Friday, January 24, 2014 10:55 AM To: jaws-users Subject: Re: [JAWS-Users] Removing Page Numbers From Front of Document in Word2010 You should go to the second section, show the headers and footers, than press alt+ to enter the ribbons. Just tab till you hear link to previous pressed. Just press enter and you should be able to modify headers and footers of the two sections separately. Sorry I don't remember the shortcuts to go there quickly. Negoslav - Original Message - From: Scott Duck l...@csdconsulting.biz To: Jaws List jaws-users-list@jaws-users.com Sent: Friday, January 24, 2014 6:22 PM Subject: [JAWS-Users] Removing Page Numbers From Front of Document in Word2010 Hello, I have a long document that I have created in Word 2010. I want page numbers to start on the seventh page of the document. I have inserted a section break at this point and broken the link to earlier pages. Page numbering does start over at page 1 on the seventh page, as it should. However, the first six pages still have page numbers 1 through 6 on them. According to a little web research, I should be able to go into the footer in the first six pages and delete the page number. When I do this, it removes all page numbers for the entire document. Does anyone know how to do what I want to do? I'm using JAWS 15 with Word 2010. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Dropbox 2.6.5
Hi, I just go to the Dropbox folder in Windows Explorer and manage my Dropbox content there. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Mike B. Sent: Friday, January 24, 2014 1:43 PM To: Jaws-Users List Subject: [JAWS-Users] Dropbox 2.6.5 Hi All, Is anyone else having problems accessing the Dropbox menues? I can't open Dropbox from the system tray by just pressing enter in the menu list pressing enter on open folder. I'm not getting any menues at all. To open Dropbox from the system tray I have to highlight Dropbox tab 3 times to the double left click button press enter. I can only open the folder but, I can't get any of the menues as I could in older versions. This is happening running XP Windows7 running Jaws 13 15 latest. All advice / help / feedback will be appreciated Take care. Mike This email was sent from my, iBarstool. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Headers in Word 2010
Hi Everyone, Using JAWS 15 and Word 2010, how do I get into the header or footer area of a document in order to edit it? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Jaws 15 and Tablets
Hi Trish, No, that is an Android tablet. JAWS only works on Windows. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Trish Sent: Wednesday, January 22, 2014 10:33 AM To: Jaws Users List Subject: [JAWS-Users] Jaws 15 and Tablets Good Mornin', I first would like to say, I am really liking this latest Jaws 15 update on my window's 7 laptop. second, does Jaws 15 run on this? Walmart offers the Monster M7 7 Inch 16GB WiFi Android Tablet in eight colors, model no. M71BL, for $74.99 with free shipping. That's the lowest total price we've seen. (It's also a very strong price for a 7 inch 16GB Android tablet in general.) It features a 1.5GHz dual-core processor, 7 inch 1280x800 IPS touchscreen LCD, 16GB internal memory, 5GB of cloud storage, 802.11n wireless, 2-megapixel front-facing camera, 5-megapixel rear-facing camera, microSD card slot, mini HDMI, Bluetooth 4.0, and Google Android 4.1 OS (Jelly Bean). 2. Today Only: SanDisk 8GB Cruzer Edge USB 2.0 Flash Drive for $4.99 [Shipped] As one of its daily deals, Best Buy offers the SanDisk 8GB Cruzer Edge USB 2.0 Flash Drive, model no. SDCZ51E-008G-T46B, for $4.99 with free shipping. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] does chrome work with jaws
Hi Joanne, I simply use Internet Explorer (currently using IE10), with little trouble in general, though I too have noticed that some web forms are not completely accessible. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Joanne Sent: Tuesday, January 21, 2014 9:51 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] does chrome work with jaws I had asked yesterday about why I can't put numbers or dates in certain form fields, and it was suggested I use another browser. Sometimes, when firefox doesn't crash which it does frequently, I've tried it in firefox and it turns out the same--can't erase what's already in the form field. Has anyone had success with chrome or is it inaccessible? Or any other browser you've maybe used with little trouble? Thanks. Joanne For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] JAWS and Error Messages
Hi Everyone, Sometimes, I will get an error message in whatever program that I am using at the moment and JAWS will stop speaking until the error message is cleared. For example, if I am using IE and I get the message Internet Explorer has encountered a problem and needs to close, JAWS will fall silent until I hit the close button to close Internet Explorer. It will not read the error message. I either have to get someone sited to read the error message or I run another screen reader to see what is going on. Now, when JAWS stops speaking, I will hit the space bar so that, if this is the problem, it will close the error message. I have also encountered this with Word and Outlook. I am running JAWS 15 but this happened with JAWS 14 too. This has occurred ever sense I have had this computer. I have not had this problem on other machines. This is the only PC that I have used that is running Windows 8. I don't know if it is a Windows 8 thing or something specific to this computer. Any thoughts? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Jaws and weight watchers
Anyone using jaws on the weight watchers site? Is there a script for it For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Page Numbers in Word 2010
Hi Everyone, Does anyone have any experience putting page numbers in a Word 2010 document? I go to the insert tab, go to headers and footers, go to page numbers, choose footer (I want them at the bottom of the page), select the type, and it goes to a screen that I don't understand. It says that it is in the document window but arrowing up and down makes it say page, header, footer, page, header, footer. Pressing enter does nothing and pressing escape goes back to my document, without putting in the page numbers. I am confused. Can anyone help me out here? I'm using the latest build of JAWS 15 and Office 2010 on a Windows 8 machine. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Skype Dialing Pad
Hi Everyone, On Skype, after placing a call to a phone number, how do I access the dialing pad in order to access a touch tone menu system? There is a dialing pad button but, when I press space on it, nothing happens. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] office 2007 excel question.
Hi How do you change the width of columns in 2007 office excel worksheet? Using Jaws 12. Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] i toons and playing songs on non Apple product.
Hi using Jaws 12 and latest i toons is their a way to play the album on a non Apple product? I have a victor reader stream which I would like to play these songs on. Merry Christmas Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Bug with latest JFW 15 with Outlook folders
I am using the latest JFW with Outlook 2010. So far, I haven't noticed that happening. Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Cristóbal Sent: Wednesday, December 18, 2013 12:05 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Bug with latest JFW 15 with Outlook folders Hello list, I downloaded the latest JFW release from yesterday and am noticing a bug that for me is significant and was curious to know whether others are experiencing it as well. In my Outlook 2010, I have six separate inboxes listed in my Favorites treeview section. This enabled me to have quick and easy access to each email inbox with minimal arrowing. Previously Jaws would announce Inbox and if there were any unread messages, the number of unread emails in that particular inbox as well. Now, since updating, Jaws only announces this unread information for the first few moments after launching Outlook, but soon after, JFW does not announce any unread messages even if there are any in that particular folder. These emails are a mixture of personal and business. My mailing list email is always getting emails all day. Whereas other more important accounts may receive Them more speratically. I now have to go from inbox to inbox to check to see if there are any emails be ith when I get a chime notification of a new message or if I happen to step away from my computer or am doing something else that takes my focus away from the pc. Are others in fact noticing this issue as well? I hadnt changed any settings in my Outlook or Jaws from the prior version of JFW 15 that I was running yesterday to today when I installed the update. Thanks, For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Bug with latest JFW 15 with Outlook folders
Hi, I have three inboxes, two IMAP and one POP. I am able to switch between them just fine with no crashes. I guess that's good or bad for you, depending on how you look at it. LOL. Seriously, sounds like there is something going on with your JFW installation or your Outlook. What version of Windows are you running? Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Cristóbal Sent: Wednesday, December 18, 2013 1:35 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Bug with latest JFW 15 with Outlook folders Just my luck... Outlook's crashing on me when I switch from one inbox to another (imap) too. I experienced this before on a couple of the beta releases, but thankfully not after the final release. The update installation seemed to have gone through fine with no problems. Who knows, maybe it was just a buggy update. If I can't figure it out, then I may just uninstall and reinstall JFW 15 again. Oh joy. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Duck Sent: Wednesday, December 18, 2013 11:30 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Bug with latest JFW 15 with Outlook folders I am using the latest JFW with Outlook 2010. So far, I haven't noticed that happening. Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Cristóbal Sent: Wednesday, December 18, 2013 12:05 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Bug with latest JFW 15 with Outlook folders Hello list, I downloaded the latest JFW release from yesterday and am noticing a bug that for me is significant and was curious to know whether others are experiencing it as well. In my Outlook 2010, I have six separate inboxes listed in my Favorites treeview section. This enabled me to have quick and easy access to each email inbox with minimal arrowing. Previously Jaws would announce Inbox and if there were any unread messages, the number of unread emails in that particular inbox as well. Now, since updating, Jaws only announces this unread information for the first few moments after launching Outlook, but soon after, JFW does not announce any unread messages even if there are any in that particular folder. These emails are a mixture of personal and business. My mailing list email is always getting emails all day. Whereas other more important accounts may receive Them more speratically. I now have to go from inbox to inbox to check to see if there are any emails be ith when I get a chime notification of a new message or if I happen to step away from my computer or am doing something else that takes my focus away from the pc. Are others in fact noticing this issue as well? I hadnt changed any settings in my Outlook or Jaws from the prior version of JFW 15 that I was running yesterday to today when I installed the update. Thanks, For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Invitations in Outlook 2010
Hi Everyone, I am using Outlook 2010. I have found that, when someone sends me a calendar invitation to a meeting, it does not display correctly. It does not give me the option to accept or decline and add it to the calendar, etcetera. I just have a lot of what looks like html code in the E-mail body. The same invitation works fine on my iPhone so the problem is not anything to do with the E-mail itself. Does anyone have any thoughts as to how to fix this? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] can the 20-digit authorization be retrieved without using a disc
Hi, No, the code did not change with JAWS 13. As far as I know, you cannot retrieve the code from JAWS. When was the last time that you bought a SMA? It sounds like you are not authorized for JAWS 15. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of joanne Sent: Friday, December 13, 2013 7:33 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] can the 20-digit authorization be retrieved without using a disc First, is it true that starting with Jaws 13 we all received a new 20-digit authorization code and couldn't use the one we had in Jaws 12? I don't know where I heard this but thought I'd heard that starting at 13 our codes would be different. I am asking because I have 13, 14 and now 15 on my computer but when I tried activating 15 it said the code I entered was for an earlier version of Jaws and wouldn't work. But I can't get Jaws 14 to tell me what code is in it because it works just fine and fully functional. I don't have a disc with me and really want to take Jaws 15 out of demo and wondered if I could somehow retrieve my code from Jaws 14 and paste that code into the activation of Jaws 15. I hope someone can help. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] What is the key command to turn on the Jaws cursor on a Laptop?
Hi Vinny and Raaju; Thanks for the suggestion. I had JAWS set to laptop all ready. Thanks to Raaju Caps lock and p did the trick. Thanks Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf of Vincent Chaney Jr. Sent: Saturday, December 07, 2013 3:27 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] what is the key command to turn on the Jaws cursor on a Laptop? Hi Scott, I haven't noticed anyone addressing the basic point to using your Caps Lock on a laptop. Have you set your Use Keyboard Layout to Laptop? From within the Option menu in JAWS, press enter on the Basics... Tab down approximately 7 times until you hear Use Keyboard Layout. If you do not have the Laptop chosen, this is where you need to change to make the Caps Lock work. You can save it in 2 manners at this point. As the Okay is the default, you can hit enter or press tab until you hear Okay and then hit enter. FYI, even if you now use a USB Keyboard with your laptop, the Caps Lock Will continue to work as another JAWS Key. The Insert Key will continue to work also as the JAWS Key... HTH... Vinny -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf of Scott Meyer Sent: Friday, December 06, 2013 7:09 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] what is the key command to turn on the Jaws cursor on a Laptop? Hi What is the key command to turn on the jaws cursor. Alt+ del turns on the Pc cursor on my Samsung. Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Excel 2010 Hide unhide columns
Hi Annette, Try this. To hide a column, arrow to the column and press Alt O, followed by C, followed by H. Now, the column will be hidden so you can't select it by arrowing to it so to unhide it, press F5, enter the coordinates of a cell somewhere in the columb, press enter to go there, then press Alt O, followed by C, followed by U. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Monday, December 9, 2013 12:12 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Excel 2010 Hide unhide columns Ugh, I do not use the JAWS virtual ribbon. Can anyone come up with another way? Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Monday, December 09, 2013 10:54 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Excel 2010 Hide unhide columns Annette, Ok, here you go using virtual ribbons: 1.Press Alt key which puts you in the home ribbon 2. cursor down until you here cells 3. Arrow right once 4. arrow down until you here format button dropdown, then hit enter 5.arrow down until you here visibility group box, then arrow right and select what you want to do. There are different ways to select what you want to hide or unhide but I think you'll figure that part out, if not post what you want to do and we'll answer Al -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Monday, December 09, 2013 9:08 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Excel 2010 Hide unhide columns Hello All, I am working in Excel 2010 with JAWS 12 on a Windows7 computer. How do I hide and unhide columns from the keyboard? A key combination short cut or directions on how to do it from the ribbon would be appreciated. Do I need to select the entire column or will it work if all that I have selected is the column headers? Thanks, Annette For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Excel 2010 Hide unhide columns
Hi Alan, I guess it depends on your situation. I started using Excel many years before there was even such a thing as a virtual ribbon. I have gotten so use to the key combinations that I don't consciously try to remember them, I just sort of know them, and I find them to be much more efficient. In this case, I posted a way to do it without the virtual ribbons because Annette specifically asked for that. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Monday, December 9, 2013 12:48 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Excel 2010 Hide unhide columns Scott, Since I've always used the virtual ribbons, isn't it easier to use them then to try to remember all these additional key combinations? Just curious Al -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Duck Sent: Monday, December 09, 2013 1:43 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Excel 2010 Hide unhide columns Hi Annette, Try this. To hide a column, arrow to the column and press Alt O, followed by C, followed by H. Now, the column will be hidden so you can't select it by arrowing to it so to unhide it, press F5, enter the coordinates of a cell somewhere in the columb, press enter to go there, then press Alt O, followed by C, followed by U. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Monday, December 9, 2013 12:12 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Excel 2010 Hide unhide columns Ugh, I do not use the JAWS virtual ribbon. Can anyone come up with another way? Annette -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Alan Robbins Sent: Monday, December 09, 2013 10:54 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Excel 2010 Hide unhide columns Annette, Ok, here you go using virtual ribbons: 1.Press Alt key which puts you in the home ribbon 2. cursor down until you here cells 3. Arrow right once 4. arrow down until you here format button dropdown, then hit enter 5.arrow down until you here visibility group box, then arrow right and select what you want to do. There are different ways to select what you want to hide or unhide but I think you'll figure that part out, if not post what you want to do and we'll answer Al -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Monday, December 09, 2013 9:08 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Excel 2010 Hide unhide columns Hello All, I am working in Excel 2010 with JAWS 12 on a Windows7 computer. How do I hide and unhide columns from the keyboard? A key combination short cut or directions on how to do it from the ribbon would be appreciated. Do I need to select the entire column or will it work if all that I have selected is the column headers? Thanks, Annette For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] What is the key command to turn on the Jaws cursor one Laptop?
Hi Mike sorry, forgot to say I do not have a number pad on this laptop. Thanks scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Michael Boyd Sent: Friday, December 06, 2013 11:05 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] What is the key command to turn on the Jaws cursor ona Laptop? Scot, The command to initiate the JAWS cursor is to press the minus sign on the num pad with the num lock turned off. That's it. Mike -- From: scott Meyer scottt.me...@verizon.net Sent: Friday, December 06, 2013 4:09 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] What is the key command to turn on the Jaws cursor ona Laptop? Hi What is the key command to turn on the jaws cursor. Alt+ del turns on the Pc cursor on my Samsung. Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] in outlook 2007 How do you change when outlook sends and receives mail?
HI David Thanks, Looked around and did not want to mess up email setting so did not go into mail set up. Thanks Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of David Whitehead Sent: Saturday, December 07, 2013 7:00 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] in outlook 2007 How do you change when outlook sends and receives mail? are you kidding? send/receive every one minute? before you asked for this help request, did you try looking for the help/answer yourself? anyway, alt+t tools, o=options, shift+tab=prefferences, right arrow,=mail setup tab, now, you could press alt+s=send/receive, or, tab you'll see, send/receivebutton, enter now you should find the info you require. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of scott Meyer Sent: Friday, December 6, 2013 7:18 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] in outlook 2007 How do you change when outlook sends and receives mail? Hi in outlook 2007 how do you set outlook to send and receive mail every 1 minute? Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] What is the key command to turn on the Jaws cursor on a Laptop?
Hi What is the key command to turn on the jaws cursor. Alt+ del turns on the Pc cursor on my Samsung. Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] in outlook 2007 How do you change when outlook sends and receives mail?
Hi in outlook 2007 how do you set outlook to send and receive mail every 1 minute? Thanks Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Inserting/Adding a Worksheet in Excel 2010
Hi Annette, I'm not sure about using the JAWS commands to do it but you can use the Excel 2003 shortcuts to do it in Excel2010 as well. To add a sheet, press alt I, followed by W. This will add a sheet before the sheet that you are currently on. To rename a worksheet, press alt O, followed by H, followed by R. You will land in an edit field which contains the name of the sheet and you can change it and then press enter. I am using Excel 2010 and that's how I do it. I have never used the JAWS specific commands for this so I have no comment concerning that. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Annette Carr Sent: Wednesday, December 4, 2013 8:51 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Inserting/Adding a Worksheet in Excel 2010 Hi All, I am using JAWS 14 with Excel 2010 on a Windows 7 64 bit computer. I only recently moved over to JAWS 14. When I was using JAWS 12, I could use the Insert+Shift+s command to bring up a context menu that would let me do things like move/copy a worksheet, rename a worksheet, etc. I cannot get this command to work in JAWS 14. It is listed as a JAWS command. Does anyone know why it does not work and/or how else I can accomplish copying and renaming worksheets? Thanks, Annette For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] using outlook 2007 and email are set to HTML How Do I change it to text?
Hi Jaws users; using jaws 12 and outlook 2007 . My emails are set to be received as Html ,how do I change it to text? some emails I get say tables and are difficult to read. Happy Thanksgiving. Scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] JAWS and IRIS
Hello, I have applied for a job with a university which uses an information system called IRIS. This is an accounting package and perhaps other things as well. As I understand it, many colleges and universities use it. Does anyone know if JAWS 15 will work with IRIS? Does anyone on the list have experience with it? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] I am using Windows 7 and outlook 2007, Where do I find the contacts folder and all my email folders so I can back them up?
hi Hans ; sorry for the late reply, thanks for the information. where do I fine the tools to run the Archive in Outlook? Scott -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Hans Pauli Sundstein Sent: Saturday, November 02, 2013 8:36 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] I am using Windows 7 and outlook 2007, Where do I find the contacts folder and all my email folders so I can back them up? Hi Scott. At first you must run the archive tool in Outlook, so your message folders and addressbook folder are stored. Than you should findd them in your Document's folder, in a subfolder named Outlook-files. Don't have Office 2007 myself, I am running Office 2010 and 2013, but hopefully the description work's. Hans Pauli. -Oprindelig meddelelse- From: scott Meyer Sent: Saturday, November 2, 2013 8:47 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] I am using Windows 7 and outlook 2007, Where do I find the contacts folder and all my email folders so I can back them up? Hi I am using Windows 7 and outlook 2007, Where do I find the contacts folder and all my email folders so I can back them up? Thanks scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] SAP/IRIS and JAWS
Hi, I have applied for a job with a university which uses a SAP/IRIS information system. Does anyone know if this system is usable with JAWS? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] I am using Windows 7 and outlook 2007, Where do I find the contacts folder and all my email folders so I can back them up?
Hi I am using Windows 7 and outlook 2007, Where do I find the contacts folder and all my email folders so I can back them up? Thanks scott For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Access 2010 With JAWS
Hi, Are there any accessibility issues using JAWS with Access 2010? I am looking at possibly doing some work for a company which would require using Access 2010. I am running JAWS 15 and Windows 8. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Office 2013 with JAWS
Hello, As I recall, there have been some issues with JAWS and Office 2013. Has any of this been resolved in JAWS 15? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Microsoft accessibility support.
HI What -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Angelina Stabile Sent: Tuesday, October 15, 2013 9:31 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Microsoft accessibility support. HI What is the toll free number? Thanks scot -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of jim rawls Sent: Tuesday, October 15, 2013 9:04 AMt Microsoft toll free number?nks Scott the To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Microsoft accessibility support. Have any of you used their free 800 number for help? How were they to deal with, and can they scan your computer to diagnose your specific problem? Jim For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Drafts View in Outlook 2010
Hi, Somehow, I have screwed up the way that the list of messages is displayed in my drafts folder. I can't just arrow up and down any more. I go down a few and then I have to use the left arrow to get to the rest and it takes a while to do so (computer just sits there for several seconds). I assume that the messages are in multiple columns. All of my other folders are still the same, in one column, where I can just arrow up and down the list. Any suggestions concerning fixing this? I have looked at all of the options under the view menu but I can't figure it out. I used Office 2003 for ten years and, after eight months, I am still getting use to the layout of Office 2010. I like it fine but everything isn't where I am use to it being and some of it works differently. I am using Outlook 2010 with Windows 8 and JAWS 15. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Drafts View in Outlook 2010
Hi Brian, Thanks for the suggestion. I did as you instructed and the show in groups option was not checked. Any other thoughts? Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Brian Lee Sent: Thursday, October 10, 2013 3:23 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] Drafts View in Outlook 2010 Hello Scott, It sounds like you might have turned on the show in groups option. You can check this by first making sure nothing is selected in the list. If a message is selected use CTRL with spacebar to remove the selection. Use the application key and find the Arrange by menu. Right arrow in to the submenu and arrow down to the show in groups choice. If it is checked just press enter to remove the checkmark. When the show in groups is active a person needs to use right arrow key to expand and left arrow key to collapse a group of messages. Take care. Brian Lee brianl...@charter.net -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Scott Duck Sent: Thursday, October 10, 2013 12:47 PM To: Jaws List Subject: [JAWS-Users] Drafts View in Outlook 2010 Hi, Somehow, I have screwed up the way that the list of messages is displayed in my drafts folder. I can't just arrow up and down any more. I go down a few and then I have to use the left arrow to get to the rest and it takes a while to do so (computer just sits there for several seconds). I assume that the messages are in multiple columns. All of my other folders are still the same, in one column, where I can just arrow up and down the list. Any suggestions concerning fixing this? I have looked at all of the options under the view menu but I can't figure it out. I used Office 2003 for ten years and, after eight months, I am still getting use to the layout of Office 2010. I like it fine but everything isn't where I am use to it being and some of it works differently. I am using Outlook 2010 with Windows 8 and JAWS 15. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Goodbye MSE?
Hi, Personally, I have given up on trying to find decent antivirus software that works well with JAWS. Currently, I use Norton and I just get sited assistance, when I need it, which is very seldom. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Gerald Levy Sent: Friday, October 4, 2013 1:40 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Goodbye MSE? Check out the following web page for an interesting article that argues that it may be time to give up on Microsoft Security Essentials and sswitch to another anti-virus program. But if what the article says is true and MSE is no longer effective, what other free JAWS-accessible anti-virus programs are still available? Forget about Avast, which requires sighted help to uninstall, or AVG which some users claim is no longer JAWS friendly. Are there any other decent free anti-virus programs that work well with JAWS? http://www.howtogeek.com/173291/goodbye-microsoft-security-essentials-micros oft-now-recommends-you-use-a-third-party-antivirus/ Gerald For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] Purchasing JAWS14 now, or holding off
I believe that, this close to the JAWS 15 release, if he bought JAWS14 now, he would be entitled to receive JAWS 15 at final release. That is how it use to work but I'm not absolutely positive if that is still the case. Perhaps Eric could chime in here. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Flor Lynch Sent: Thursday, October 3, 2013 9:58 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] Purchasing JAWS14 now, or holding off Hi, A friend wishes to update his JAWS from JAWS10. He was thinking of upgrading to JAWS14, until I told him that JAWS15 will soon be out. However, I also told him (as he's using Windows7) that JAWS14 would work fine with it; and that now (or very soon) he'd be entitled to JAWS15 free if he bought JAWS14. is that policy in operation right now, or indeed, should he wait un til JAWS15 comes out and pay for it instead? His dealer informed him if he bought JAWS now it'd be JAWS14 and that he'd have to pay for any upgrades, including that to JAWS15. As we're well in the beta cycle for 15, I don't think that's necessarily the case. thank you for any clarification. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Problems With E-mail After Installing Omnipage
Hi, Last week, I wrote to the list to ask for OCR suggestions. One of the OCR packages that was highly recommended was Omnipage. I got the trial version of Omnipage Ultimate. I like it but it has caused a little problem. After installing Omnipage, when I first start Outlook and try to go into a mail message, I get a dialog box saying that there is no E-mail program installed to perform the requested action. I hit OK and it goes on into the message and everything works fine from that point on. After that first message, it doesn't do it again until I close Outlook and open it again. Then, the same thing will happen but, again, only with the first message that I open. It really isn't a big deal but it is a little annoying. Does anyone have any idea how to fix this little annoyance? I am using JAWS15, Windows 8, Outlook 2010, and Omnipage Ultimate 18. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] BARD books
Hi, As far as I know, there is no software that will play NLS books on the PC. To my knowledge, NLS has chosen only to allow authorization of dedicated hardware players, until now with the BARD IOS app. I wish they would allow authorization of PC software like FS Reader. My other NLS playback solutions work just fine but I like to have options. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Joseph FreeTech Sent: Tuesday, September 17, 2013 12:52 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] BARD books ?I agree with David, but even if you had the authorization, FSReader would still not be able to play the NLS books. I think the structure is different. I launched the FSReader 2.0 daisy book help file and found no reference to NLS books, and I suspect it will be the same for FSReader 3.0. Joseph - Original Message - From: David Ferrin ow...@jaws-users.com To: jaws-users-list@jaws-users.com Sent: Tuesday, September 17, 2013 10:33 AM Subject: Re: [JAWS-Users] BARD books My guess would be no since you need a special authorization for those. David Ferrin A complex system that does not work is invariably found to have evolved from a simpler system that worked perfectly. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Maria Campbell Sent: Tuesday, September 17, 2013 11:59 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] BARD books Is the FS Reader 3 able to read BARD/NLS books? -- Sunny Day Maria Campbell lucky1i...@sbcglobal.net When the power of love is stronger than the love of power, Then the world will know peace. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Scanning and OCR Software
Hi, When I was using Office 2003, I used Microsoft Document Scanning for scanning and OCR. Earlier this year, I got a new computer and upgraded to Office 2010, which does not have Microsoft Document Scanning. Can anyone recommend an affordable and JAWS friendly scanning and OCR package? Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] JFW 15 installation issues
Hi, I had a somewhat similar issue when installing the JAWS 14 beta. I went through the installation process, which appeared to go fine, and, when I was done, no JAWS 14 anywhere. I just reinstalled it and everything was fine. I have had no issues with the JAWS 15 beta. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Cristóbal Sent: Monday, September 16, 2013 12:40 PM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] JFW 15 installation issues Hello Eric, Thank you for following up. Yes, I figured it had to be something isolated to my system since I hadn't really read any messages from others having these sorts of issues. Odd, since I've always played with the betas going back to JFW 4.5. Oh well, I'll try calling in later today when work slows down a bit. Thanks again for the follow up. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Eric Damery Sent: Monday, September 16, 2013 10:12 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] JFW 15 installation issues Hello, I have read your account and the installation did not work as expected. I suggest you consider contacting support and asking for some assistance sorting out the installation issue. I think that it never completed as expected. There are two options that the support people will probably suggest. Either looking to see if it is installed and then uninstalling, or doing a special install from the command line that would force and over-write of everything in the JAWS 15 install you have. We have not been getting any reports of installation issues as you describe so I'm certain that this is something we just need to help you sort out. Regards, Eric Damery -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Cristóbal Sent: Monday, September 16, 2013 12:36 PM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] JFW 15 installation issues Hello list, So I took the plunge with the beta over the weekend and had the oddest experience that I hadn't encountered with previous JFW beta cycles. I already submitted a bug report to FS, but since this bug doesn't really allow me to work with the beta, I was curious to know if this is something others have come across or if it was perhaps something that went wrong just on my system. In any event, I downloaded the exe file (64 bit) and went through the process of instalation like normal. At the end doing the whole restart for changes to take affect etc. After this was done and my computer powered back up, there was no indication of Jaws 15 anywhere on my desktop or in the start menu. The FSReader 3.0 icon did appear on my desktop and indeed launched fine so this showed me that something was installed. I eventually went through the windows explorer, Program Files, Freedom scientific, Run Jaws and then to the Jaws 15 folder. There I found the JFW 15 exe file and figured I would just for convenience sake throw a short cut to the file on my desktop. After placing the JFW.exe short cut and renaming it for Jaws 15, I unloaded JFW 14 and started JFW 15. However, while using the JFW 15 beta, I am finding that the settings I change in the voice profile section aren't sticking. Even though I speed up the rate of speech and press the ok button, Jaws reverts to its default slow rate setting. I also tried the startup wizard under the help menu, but it along with the check for authorization and check for updates options appear as unavailable. Like I said, I already submitted these problems through the beta form, but since there's no real option to call it in and get more detailed support, I thought I'd write to see if others dealt with these same issues and what if anything they did to fix them since as of now, I can't really work with JFW 15 and don't know if this issue will persist through to when it finally gets released in its final form. Thanks, For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
[JAWS-Users] Problems Sorting E-mail
Hello, I'm using JAWS 15 with Windows 8 and Office 2010. Recently, I find that I cannot sort my E-mail in Outlook. I want to sort a particular folder by sender in order to find a set of E-mails. I go to view arrangement arrange by. When I press space or enter, nothing happens. This used to work and now it doesn't and I don't understand why. It is not a JAWS 15 issue because I tried it running JAWS 14 and got the same result. I'm sure that I'm missing something simple but I can't think of what it might be. It's 5:00am and I haven't had my coffee yet and that may be the problem. Anyway, for the moment, I'm stumped. If anyone can, please help. Thanks, Scott Duck For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] JAWS 15 beta
Susie, I may not understand your situation correctly but I think that I may see your problem here. If you have gone into the settings center and changed the setting for quotation marks to none then it will read the quotation marks when you have punctuation verbosity set to none or anything more verbose than none. All of the other punctuation verbosity settings are more verbose than none so it will always read the quotation marks. Not sure if that made sense. Go in and change the setting for quotation marks to all and then, unless you have your punctuation verbosity set to all, it shouldn't read them. If this doesn't make enough sense, let me know and I'll try to explain better. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of susie q Sent: Thursday, September 12, 2013 6:54 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] JAWS 15 beta Ok, I have my puntuation set right, as FS has set it for me, and I don't want JAWS to say the word quote in a text docqument. I at first had JAWS set to none, but FS changed it to some, and went into the defelt settings, and put quotes to none, and JAWS is still reading the word quote in all my word doquments, and even in emails that have quotes around words, so I had them see if it is a bug, and they are not sure what is going on, so my question is what ells can I do to stop JAWS from reading the quotes. I am at a lose, and I had asked here when I got the computer but I did not hear any thing about it, so I figured know one knew the fix eather. susie -Original Message- From: David Ferrin Sent: Thursday, September 12, 2013 7:06 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] JAWS 15 beta Sorry but honestly I don't know what you're talking about, please explain further. David Ferrin Always be yourself because the people that matter don't mind, and the ones that mind don't matter. -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of susie q Sent: Thursday, September 12, 2013 7:04 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] JAWS 15 beta hi David, have they came up with the bug with the quotes? I mean, I have done every thing FS told me to do, and I even did a tandum with them, and JAWS still reads and says the quotes in my docquments using both 13, and 14. they are perplexed as to why it is doing it. sue -Original Message- From: David Ferrin Sent: Thursday, September 12, 2013 6:59 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] JAWS 15 beta So far for me it is quite responsive, quick to load on this 64 bit system and even though fancy voices normally don't really matter to me I must say that the new expressive voices are very good. Last year when those voices came out I was working with one of them and I found out about the capital letter problem at an in opportune moment, so I am glad to see that has been fixed. I'm still kicking the tires so to speak but I have no problems at all so far boys and girls. David Ferrin Always be yourself because the people that matter don't mind, and the ones that mind don't matter. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] new voices?
Hi Guys, I have installed the U.S. Vocalizer Expressive voices on my machine. I have used Ava a little and I don't think that I have ever heard a happier sounding synthetic voice, unlike Samantha, who always sounds a little mad. I wish that Ava was available for my iPhone. Overall though, for JAWS, I still prefer plain old Eloquence. I have used it for 15 years or so, ever sense they started packaging it with JAWS, and I have just gotten so use to it that it seems a little strange using anything else. The Eloquence voice itself sounds very robotic but I think that it does a better job at very high speeds and the pronunciation is a little better than many of these more natural sounding voices. Thanks, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of Merv Keck Sent: Wednesday, September 11, 2013 9:46 AM To: jaws-users-list@jaws-users.com Subject: Re: [JAWS-Users] new voices? Allison, Ava, Smantha, and Tom are the U.S. voices. However, they are very expressive as was discussed in the latest FS cast as compared to previous versions. The direct version does not indicate caps by raising pitch like the expressive version. I am using Ava myself and am very happy with the response on my Windows 7 64 bit running both jaws and magic with 6 gigs of ram. I am not up on all the additional voices for other countries but I am impressed with all the vocalizer expressive voices out there for everyone already. I am also very happy with the first public beta so far. It's playing very well with Magic 12 and comes in handy on all these overcrowded web sites today. blind5sparrow For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/
Re: [JAWS-Users] changing synthesizer languages
The Vocalizer voices each have only one language that they support. If you want a different language, you have to get a different voice. HTH, Scott Duck -Original Message- From: JAWS-Users-List [mailto:jaws-users-list-boun...@jaws-users.com] On Behalf Of randy tijerina Sent: Wednesday, September 11, 2013 9:45 AM To: jaws-users-list@jaws-users.com Subject: [JAWS-Users] changing synthesizer languages friends, I'll try my best to explain this. but, i fear i may be the only one. or, maybe I did something wrong. for some weird reason on the beta release i for the life of me, cannot find the option to change synthesizer languages. if that wasn't bad enough, not only in eloquence, but on the vocalizer expressions. am i the only one? I will see what happens here before I submit a report. anyone else have this problem? regards, Randy Tijerina. For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/ For answers to frequently asked questions about this list visit: http://www.jaws-users.com/help/