Re: wpa_supplicant and cx3110x
On Sun, 2008-06-15 at 00:18 +0300, Siarhei Siamashka wrote: BTW, there is a set of community enhancements and patches for cx3110x driver (Nokia 770 version) collected together by Rodrigo Vivi and posted here: https://garage.maemo.org/pipermail/cx3110x-devel/2008-April/38.html The cx3110x.patch from that link implements the required parts of WE-18 for the driver and fixes the problem for me. Thanks! -- Andrew Barr [EMAIL PROTECTED] (614) 581-3537 (Verizon Wireless) ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
wpa_supplicant and cx3110x
Hello, I am using an N800 running Angstrom[0] booting off of an SD card, using an initfs modified to multiboot as is documented on the wiki[1]. I am having some trouble getting wpa_supplicant to authenticate on my WPA-EAP (PEAP-MSCHAPv2/TKIP) home network. This works fine in the Internet Tablet OS provided power management is turned off (something is apparently wrong with 802.11 PSM on my AP). It appears to be off by default when the tablet is booted into Angstrom (/sys/devices/platform/wlan-omap/psm is '0'). The EAP auth seems to work ok (eap_state in 'wpa_cli stat' is SUCCESS) but the crypto gets hung up at 4WAY_HANDSHAKE and times out. I have observed this on my own home network and at least one other similar network at my school. I am using wpa_supplicant 0.6.3 linked with openssl (also tested 0.5.5 linked with gnutls) and the 'wext' driver. The cx3110x driver is the one shipped in the initfs for the latest official Nokia firmware. I can provide packet captures and similar debugging info, perhaps the maintainer of the driver can help me out with this? The last message I saw concerning this was from late 2007, talking about running wpa_supplicant under ITOS and this was not yet supported as cx3110x did not yet support WE-18 or later. This appears to no longer be the case, as /proc/net/wireless indicates WE-22 and no version mismatch messages are printed by iwconfig. Also, the output of 'iwlist wlan0 scan' has WPA info, which indicates to me that WPA via Wireless Extensions _should_ work. Thanks for any help. [0] http://www.angstrom-distribution.org/ [1] http://maemo.org/community/wiki/HowTo_EASILY_Boot_From_MMC_card/ -- Andrew Barr [EMAIL PROTECTED] (614) 581-3537 (Verizon Wireless) ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
Re: wpa_supplicant and cx3110x
On Sunday 15 June 2008, Andrew Barr wrote: I am using an N800 running Angstrom[0] booting off of an SD card, using an initfs modified to multiboot as is documented on the wiki[1]. I am having some trouble getting wpa_supplicant to authenticate on my WPA-EAP (PEAP-MSCHAPv2/TKIP) home network. This works fine in the Internet Tablet OS provided power management is turned off (something is apparently wrong with 802.11 PSM on my AP). It appears to be off by default when the tablet is booted into Angstrom (/sys/devices/platform/wlan-omap/psm is '0'). The EAP auth seems to work ok (eap_state in 'wpa_cli stat' is SUCCESS) but the crypto gets hung up at 4WAY_HANDSHAKE and times out. I have observed this on my own home network and at least one other similar network at my school. I am using wpa_supplicant 0.6.3 linked with openssl (also tested 0.5.5 linked with gnutls) and the 'wext' driver. The cx3110x driver is the one shipped in the initfs for the latest official Nokia firmware. I can provide packet captures and similar debugging info, perhaps the maintainer of the driver can help me out with this? The last message I saw concerning this was from late 2007, talking about running wpa_supplicant under ITOS and this was not yet supported as cx3110x did not yet support WE-18 or later. This appears to no longer be the case, as /proc/net/wireless indicates WE-22 and no version mismatch messages are printed by iwconfig. Also, the output of 'iwlist wlan0 scan' has WPA info, which indicates to me that WPA via Wireless Extensions _should_ work. Thanks for any help. [0] http://www.angstrom-distribution.org/ [1] http://maemo.org/community/wiki/HowTo_EASILY_Boot_From_MMC_card/ IIRC the recommended way to get cx3110x support is to use cx3110x-devel mailing list: https://garage.maemo.org/mailman/listinfo/cx3110x-devel BTW, there is a set of community enhancements and patches for cx3110x driver (Nokia 770 version) collected together by Rodrigo Vivi and posted here: https://garage.maemo.org/pipermail/cx3110x-devel/2008-April/38.html -- Best regards, Siarhei Siamashka ___ maemo-developers mailing list maemo-developers@maemo.org https://lists.maemo.org/mailman/listinfo/maemo-developers
