[MeeGo-dev] Saving power used by WiFi
Hello. I have found link to this article in ACM Technews - newsletter pointing to interesting research sent to ACM members. It looks like power saving requires support from device and access point, but IMO it is interesting piece of research. OTOH I am not network specialists - hope this will help with MeeGo power management. Regards. How Wi-Fi Drains Your Cell Phone Technology Review (06/24/10) Simonite, Tom Researchers at the University of Texas at Austin (UTA), University of Wisconsin-Madison, and Microsoft have developed NAPman, a system that modifies the software running on Wi-Fi access points to extend cell phones' battery life. The researchers began by benchmarking how much power different cell phones need to use Wi-Fi. We found that an HTC Tilt's total power consumption increases by threefold when using Wi-Fi, says UTA's Eric Rozner. NAPman enforces a first-come, first-served approach to all data, whether it is from a device using a power saving mode or not. It also only wakes a phone to retrieve its data when that data is at the front of the queue, preventing the phone from waiting and wasting energy. The system also tracks devices that go to sleep after a fixed time so they are not sent data while asleep. Not only could we provide 70 percent energy savings compared to the conventional implementation, but NAPman is fair to background traffic, Rozner says. In one test, NAPman doubled the device's battery life from 4.7 to 10 hours. http://www.technologyreview.com/communications/25651/?a=f -- Tomasz Rybak bogom...@post.pl GPG/PGP key ID: 2AD5 9860 Fingerprint A481 824E 7DD3 9C0E C40A 488E C654 FB33 2AD5 9860 http://member.acm.org/~tomaszrybak signature.asc Description: This is a digitally signed message part ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
Re: [MeeGo-dev] GCC 4.5 in use for arm building since when?
In trunk, it is about mid of July. For BMC#3936, it was fixed with mentioned patch and is on the way to trunk. And specific to this bug, it is more like issue related with ARMv7, do you run into in v7 only or both in V5 and V7 in meego? Can you please described your issue in BMC#3936 also? From: meego-dev-boun...@meego.com [mailto:meego-dev-boun...@meego.com] On Behalf Of Jyrki H?m?l?inen Sent: Sunday, July 25, 2010 4:59 AM To: meego-dev@meego.com Subject: [MeeGo-dev] GCC 4.5 in use for arm building since when? Hi all, I did run into some problems in running rootfs built from daily repos. Yes, I like to live dangerously. The problems seem to relate to gcc4.5 adoption at some point of time. e.g. http://bugs.meego.com/show_bug.cgi?id=3936 Could someone point me the date when new gcc was taken in use, so I could try to build a working image? It is probably announced somewhere, but I was not able to find this info. Cheers, Jyrki ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
[MeeGo-dev] PyQt
Hi: I am looking at developing for MeeGo and I know C/C++ is one choice. Is it possible to develop MeeGo application using Python/PyQt? thanks Mark ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
Re: [MeeGo-dev] PyQt
Yes I would expect it'd be much the same way it is down for Maemo, note that you might need to download and install source versions of the tools since there might not be RPMs for that at this time. [1] http://esbox.garage.maemo.org/2nd_edition/installation.html [2] http://www.forum.nokia.com/info/sw.nokia.com/id/c05693a1-265c-4c7f-a389-fc227db4c465/Maemo_5_SDK.html [3] http://www.pyside.org/downloads/ If you want the PySide bindings which are supposed to be a better, more complete version of the original Qt bindings, you need to consult the download page[3] for the PySide project. You can also attempt development inside the MeeGo SDK given you build the required dependencies there, in Maemo the packages are available from extra-devel. I hope this helps (thanks to Renato and Luca for originally posting this). Sivan On Mon, Jul 26, 2010 at 6:15 AM, Mark S. Townsley mstowns...@gmail.com wrote: Hi: I am looking at developing for MeeGo and I know C/C++ is one choice. Is it possible to develop MeeGo application using Python/PyQt? thanks Mark ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
[MeeGo-dev] MeeGo Community Infrastructure Bug Jar 2010.30
A Quick Look at MeeGo Community Infrastructure in Bugzilla (http://bugs.meego.com/). 2010-07-19 through 2010-07-25 As of 2010-07-26 MeeGo Community Infrastructure contains 134 items (+2), including 49 open issues (-1): * open bugs: 41 (-1) * critical: 0 * security: 0 * assigned: 6 * needinfo: 2 * waiting for upstream: 0 * reopened: 1 (-1) * unconfirmed: 0 * open enhancements: 8 * assigned: 2 * needinfo: 0 * waiting for upstream: 0 * reopened: 0 * unconfirmed: 0 ==--- New Items ---== 2 bugs were opened - ( http://bugs.meego.com/buglist.cgi?bug_id=3958,3970 ): * [3958] [bugs.meego.com] removing Roger from default CC list on various netbook components * [3970] [repo.meego.com] Can not update yum 0 bugs were critical. 0 enhancements were opened. ==--- Resolved Bugs ---== 3 bugs were resolved fixed - ( http://bugs.meego.com/buglist.cgi?bug_id=2755,3704,3958 ): * [2755] [Build Service] download.meego.com should contain development tools targets * [3704] [Git Repositories] New repository for meegotouch tests * [3958] [bugs.meego.com] removing Roger from default CC list on various netbook components 0 bugs were resolved invalid. 0 bugs were resolved wontfix. 0 bugs were resolved duplicate. 0 bugs were resolved worksforme. 0 bugs were resolved moved. ==--- Resolved Enhancements ---== 0 enhancements were resolved fixed. 0 enhancements were resolved invalid. 0 enhancements were resolved wontfix. 0 enhancements were resolved duplicate. 0 enhancements were resolved worksforme. 0 enhancements were resolved moved. ==--- Released Items ---== 0 bugs were released. 0 enhancements were released. ==--- Security Bugs ---== 0 bugs were flagged. ==--- Confirmed Items ---== 0 bugs were confirmed. 0 enhancements were confirmed. ==--- Assigned Items ---== 0 bugs were assigned. 0 enhancements were assigned. ==--- Reopened Items ---== 0 bugs were reopened. 0 enhancements were reopened. ==--- Unloved Items ---== 0 bugs were needing love. 0 enhancements were needing love. ==--- Top Tens ---== Ten biggest open bugs by number of votes - ( http://bugs.meego.com/buglist.cgi?bug_id=3845,1519,1986,2258,2386,3680,3806,3866,3870,3871 ): 1. (17%) [3845] [meego.com] Hide submitted on date (or move to the bottom) 2. (8%) [1519] [Build Service] Extraction of lzma source archives with xz fails only for armv*el in Trunk 3. (8%) [1986] [Build Service] Providing a 'restricted' URL/view of Trunk and devel:devices:n900 build results to aid open development 4. (8%) [2258] [meego.com] Complete the Community Office structure with names and roles 5. (8%) [2386] [Build Service] Scheduler uses arv5el as architecture which causes problems with %ifarch macro 6. (8%) [3680] [meego.com] Typos and image problem in UI Design Guidelines - Handset 7. (8%) [3806] [repo.meego.com] debuginfo is not published for ARM architectures v5 and v7 (new this week) 8. (8%) [3866] [wiki.meego.com] Please install BugzillaReports extention to MeeGo wiki (new this week) 9. (8%) [3870] [meego.com] Moving help from community to devices (new this week) 10. (8%) [3871] [meego.com] Add MD5 sum links for all product downloads (new this week) --- Please visit http://bugs.meego.com/ to vote. Registration is easy and free. Ten biggest open enhancements by number of votes (unchanged for 5 weeks) - ( http://bugs.meego.com/buglist.cgi?bug_id=615,922,1147,2162 ): 1. (57%) [615] [repo.meego.com] Open the access of MeeGo OBS 2. (14%) [922] [meego.com] Direct link to forum.meego.com from meego.com/community 3. (14%) [1147] [meego.com] Website for API documentation 4. (14%) [2162] [meego.com] Headings are not clickable 5. (no entry) 6. (no entry) 7. (no entry) 8. (no entry) 9. (no entry) 10. (no entry) --- Please visit http://bugs.meego.com/ to vote. Registration is easy and free. Ten hottest open bugs - ( http://bugs.meego.com/buglist.cgi?bug_id=2258,3806,3866,2443,3970,3565,2386,3709,3727,2262 ): 1. [2258] [meego.com] Complete the Community Office structure with names and roles 2. [3806] [repo.meego.com] debuginfo is not published for ARM architectures v5 and v7 3. [3866] [wiki.meego.com] Please install BugzillaReports extention to MeeGo wiki 4. [2443] [bugs.meego.com] Cannot log into Bugzilla using a password longer than 16 characters (+1 this week) 5. [3970] [repo.meego.com] Can not update yum (new this week) 6. [3565] [Build Service] Account request (new this week) 7. [2386] [Build Service] Scheduler uses arv5el as architecture which causes problems with %ifarch macro (new this week) 8. [3709] [meego.com] please create a cname for mxr.meego.com to mxr.moego.org (new this week) 9. [3727] [bugs.meego.com] Adjust the position of the Flags: table on the enter_bug.cgi template. (new this week) 10. [2262] [forum.meego.com] Dotted underline under avatar in Firefox (new this week) Ten hottest open enhancements - (
[MeeGo-dev] MeeGo Projects Bug Jar 2010.30
A Quick Look at MeeGo Projects in Bugzilla (http://bugs.meego.com/). 2010-07-19 through 2010-07-25 As of 2010-07-26 MeeGo Projects contains 321 items (+9), including 181 open issues (+6): * open bugs: 68 (+6) * critical: 2 * security: 0 * assigned: 39 (+3) * needinfo: 2 * waiting for upstream: 1 * reopened: 4 * unconfirmed: 0 * open enhancements: 113 * assigned: 102 * needinfo: 1 * waiting for upstream: 4 * reopened: 1 * unconfirmed: 0 ==--- New Items ---== 8 bugs were opened - ( http://bugs.meego.com/buglist.cgi?bug_id=3937,3967,3971,3996,4000,4001,4002,4010 ): * [3937] [Connection Manager] connman doesn't update network interface status if doing ifconfig down from the command line * [3967] [Connection Manager] connmand occupies 100% cpu for about 1: 40 if plugging a network cable * [3971] [Ofono] Can not set Voice No reply timeout value in CF * [3996] [Connection Manager] No Configuring state while 3G is being connected * [4000] [Connection Manager] The ethernet state is Ready when the proxy was set * [4001] [Ofono] Segfault in ofono_modem_driver_unregister * [4002] [Connection Manager] start-scanning script produces trace when wifi device is not enabled * [4010] [Ofono] [Mint_clo][MeeGo BSP]Some utilities can't run with segment fault. 0 bugs were critical. 0 enhancements were opened. ==--- Resolved Bugs ---== 1 bug was resolved fixed - ( http://bugs.meego.com/buglist.cgi?bug_id=2338 ): * [2338] [Connection Manager] connman-test missing dependency on dbus-python and pygobject2 2 bugs were resolved invalid - ( http://bugs.meego.com/buglist.cgi?bug_id=3885,3996 ): * [3885] [Connection Manager] Can't get wifi IP after plug off wireline cable or disconnect wireline with wireline default gateway * [3996] [Connection Manager] No Configuring state while 3G is being connected 0 bugs were resolved wontfix. 1 bug was resolved duplicate - ( http://bugs.meego.com/buglist.cgi?bug_id=3937 ): * [3937] [Connection Manager] connman doesn't update network interface status if doing ifconfig down from the command line 0 bugs were resolved worksforme. 0 bugs were resolved moved. ==--- Resolved Enhancements ---== 0 enhancements were resolved fixed. 0 enhancements were resolved invalid. 0 enhancements were resolved wontfix. 0 enhancements were resolved duplicate. 0 enhancements were resolved worksforme. 0 enhancements were resolved moved. ==--- Released Items ---== 0 bugs were released. 0 enhancements were released. ==--- Security Bugs ---== 0 bugs were flagged. ==--- Confirmed Items ---== 0 bugs were confirmed. 0 enhancements were confirmed. ==--- Assigned Items ---== 4 bugs were assigned - ( http://bugs.meego.com/buglist.cgi?bug_id=3792,3885,3908,3967 ): * [3792] [Connection Manager] proxy configuration issues * [3885] [Connection Manager] Can't get wifi IP after plug off wireline cable or disconnect wireline with wireline default gateway (nc) * [3908] [Connection Manager] Failed to reconnect to BT AP after power off BT AP service then turn on * [3967] [Connection Manager] connmand occupies 100% cpu for about 1: 40 if plugging a network cable --- (nc) indicates the bug no longer has listed status. 0 enhancements were assigned. ==--- Reopened Items ---== 2 bugs were reopened - ( http://bugs.meego.com/buglist.cgi?bug_id=2338,3052 ): * [2338] [Connection Manager] connman-test missing dependency on dbus-python and pygobject2 (nc) * [3052] [SyncEvolution] [i18n] Without setting service, Sync Now button is in English --- (nc) indicates the bug no longer has listed status. 0 enhancements were reopened. ==--- Unloved Items ---== 0 bugs were needing love. 0 enhancements were needing love. ==--- Top Tens ---== Ten biggest open bugs by number of votes - ( http://bugs.meego.com/buglist.cgi?bug_id=1766 ): 1. (100%) [1766] [MeeGo Touch Framework] First letter of a highlighted label doesn't respond when click on it 2. (no entry) 3. (no entry) 4. (no entry) 5. (no entry) 6. (no entry) 7. (no entry) 8. (no entry) 9. (no entry) 10. (no entry) --- Please visit http://bugs.meego.com/ to vote. Registration is easy and free. Ten biggest open enhancements by number of votes - ( http://bugs.meego.com/buglist.cgi?bug_id=440,2704,2588 ): 1. (45%) [440] [Connection Manager] Can't support ad-hoc mode for WiFi 2. (36%) [2704] [Connection Manager] Cannot use mobile phone with DUN to connect the internet 3. (18%) [2588] [Connection Manager] Cannot configure 802.1X network in UI 4. (no entry) 5. (no entry) 6. (no entry) 7. (no entry) 8. (no entry) 9. (no entry) 10. (no entry) --- Please visit http://bugs.meego.com/ to vote. Registration is easy and free. Ten hottest open bugs - ( http://bugs.meego.com/buglist.cgi?bug_id=2640,1804,3914,1770,2722,658,3052,2786,4010,3803 ): 1. [2640] [Connection Manager] ConnMan fails to enable WIFI in some specific condition (+1 this week) 2. [1804] [MeeGo Touch
[MeeGo-dev] MeeGo Features Bug Jar 2010.30
A Quick Look at MeeGo Features in Bugzilla (http://bugs.meego.com/). 2010-07-19 through 2010-07-25 As of 2010-07-26 MeeGo Features contains 243 items, including 242 open issues: * open enhancements: 236 * assigned: 0 * needinfo: 2 * waiting for upstream: 0 * reopened: 0 * unconfirmed: 0 ==--- New Items ---== 0 enhancements were opened. ==--- Resolved Enhancements ---== 0 enhancements were resolved fixed. 0 enhancements were resolved invalid. 0 enhancements were resolved wontfix. 0 enhancements were resolved duplicate. 0 enhancements were resolved worksforme. 0 enhancements were resolved moved. ==--- Released Items ---== 0 enhancements were released. ==--- Confirmed Items ---== 0 enhancements were confirmed. ==--- Assigned Items ---== 0 enhancements were assigned. ==--- Reopened Items ---== 0 enhancements were reopened. ==--- Unloved Items ---== 0 enhancements were needing love. ==--- Top Tens ---== Ten biggest open enhancements by number of votes - ( http://bugs.meego.com/buglist.cgi?bug_id= ): 1. (no entry) 2. (no entry) 3. (no entry) 4. (no entry) 5. (no entry) 6. (no entry) 7. (no entry) 8. (no entry) 9. (no entry) 10. (no entry) --- Please visit http://bugs.meego.com/ to vote. Registration is easy and free. Ten hottest open enhancements - ( http://bugs.meego.com/buglist.cgi?bug_id=3061,3115,2738,2655,3110,3038,2730,2610,3105,3033 ): 1. [3061] [MeeGo Core OS Features] [FEA] Meego touch framework - Animation and Touch (new this week) 2. [3115] [MeeGo Core OS Features] [FEA] Meego touch framework - Sound framework (new this week) 3. [2738] [MeeGo Core OS Features] [FEA] Social Networking (new this week) 4. [2655] [MeeGo Handset Features] [FEA] SMS application message handling functionality (new this week) 5. [3110] [MeeGo Handset Features] [FEA] Email rich HTML messages (new this week) 6. [3038] [MeeGo Handset Features] [FEA] Browser XSLT and XPath (new this week) 7. [2730] [MeeGo Core OS Features] [FEA] Qt QML support (new this week) 8. [2610] [MeeGo Core OS Features] [FEA] Qt 4.7 (new this week) 9. [3105] [MeeGo Handset Features] [FEA] Email SMTP support (-8 this week) 10. [3033] [MeeGo Handset Features] [FEA] Browser CSS support (-8 this week) Ten oldest open enhancements (unchanged for 6 weeks) - ( http://bugs.meego.com/buglist.cgi?bug_id=2610,2629,2630,2631,2633,2655,2656,2657,2658,2659 ): 1. [2610] [MeeGo Core OS Features] [FEA] Qt 4.7 2. [2629] [MeeGo Handset Features] [FEA] Short Message Service (SMS) application 3. [2630] [MeeGo Handset Features] [FEA] Dialer application 4. [2631] [MeeGo Handset Features] [FEA] Image viewing application 5. [2633] [MeeGo Handset Features] [FEA] Mozilla Fennec Browser 6. [2655] [MeeGo Handset Features] [FEA] SMS application message handling functionality 7. [2656] [MeeGo Handset Features] [FEA] SMS Cell Broadcast 8. [2657] [MeeGo Handset Features] [FEA] Dialer application extended call handling functionality 9. [2658] [MeeGo Handset Features] [FEA] Dialer application call statistics 10. [2659] [MeeGo Handset Features] [FEA] Dialer application voice mail support ==--- NeedInfo Items ---== 0 enhancements were needing more information. ==--- Upstream Items ---== 0 enhancements were waiting on upstream work. This summary is also posted to the MeeGo Forum: http://forum.meego.com/showthread.php?p=6119#post6119 and the MeeGo Bug Jar blog: http://www.octofish.net/meegobugjar/ ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
Re: [MeeGo-dev] nfs package in meego ?
2010/7/23 Auke Kok auke-jan.h@intel.com: On 07/23/10 14:23, adhyas.avas...@nokia.com wrote: Do we have the nfs-utils and nfs-utils-lib package for MeeGo 1.0 somewhere in the repo? Can you please point me to it? I tried installing a public rpm but that is not sufficient to configure the nfs server on MeeGo. neither, MeeGo doesn't support NFS, nor do we have the needed kernel options enabled or tools packaged. There is one quite legit use for NFS, which is general handset development. Traditionally many porters use NFS as boot medium for their boards to not constantly rewrite NAND or SD cards with system images on them, effectively speeding up their development cycles. For non-netbook configurations like handsets or development boards, modules may be considered useful to have enabled. Chances are though that board porters will just enable NFS in their kernel configurations. This doesn't mean the utils have to be there, at least in N900, we use busybox to fullfill that within a boot initrd. Best regards, Carsten Munk ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev