Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
On Thu, Oct 20, 2011 at 12:06, Mari Voipio mari.voi...@iki.fi wrote: I did notice a scrolling problem, but it is not that bad: I'm using a marble mouse that doesn't have a scroll wheel at all, so I had to install Logitech's software to turn a scroller on and of with the fourth mouse button. That works everywhere else, but not in SciTe - the scroll bar moves, but nothing happens... So, the Kensington Trackball with Scroll Ring turned up. I just plugged out the Logitech scroll-less marble and plugged in the new Kensington trackboll - and everything works like a charm, including scrolling in SciTe (and the marble moves a lot better, too, I definitely prefer this one). However, most of my files are small as the books I work on are split into chapters. The real test won't come until I tackle the 150-page manual later this week... But so far so good! Mari ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
Lähetetty kännystäni / Sent from my iPhone On 20.10.2011, at 13.06, Hans Hagen pra...@wxs.nl wrote: On 20-10-2011 10:50, Lutz Haseloff wrote: if i install SciTe and the the ConTeXt files for SciTe on my Win 7 64 bit, i can no longer scroll the text in the editor. Windows quits SciTe because of an unknown error :-( Has someone else the same error? I assume that you installed the lexer lua libs too. I don't know if that one is 64 bit (I'm on a by now pretty old 32 bit machine). Hans I'm running 32-bit SciTe, because that's what I got by using Troy Simpson's Windows installer for SciTe; both my work laptop and the Win 7 Home I used to test my wiki text are 64-bit computers. The stuff on the wiki worked on those two computers, can't vouch for anything else... Or, rather: SciTe got installed into the (x86) directory, so I just *assumed* that it is a 32-bit version. Mari ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
2011/10/20 Mari Voipio mvoi...@gmail.com: Lähetetty kännystäni / Sent from my iPhone On 20.10.2011, at 13.06, Hans Hagen pra...@wxs.nl wrote: On 20-10-2011 10:50, Lutz Haseloff wrote: if i install SciTe and the the ConTeXt files for SciTe on my Win 7 64 bit, i can no longer scroll the text in the editor. Windows quits SciTe because of an unknown error :-( Has someone else the same error? I assume that you installed the lexer lua libs too. I don't know if that one is 64 bit (I'm on a by now pretty old 32 bit machine). Hans I'm running 32-bit SciTe, because that's what I got by using Troy Simpson's Windows installer for SciTe; both my work laptop and the Win 7 Home I used to test my wiki text are 64-bit computers. The stuff on the wiki worked on those two computers, can't vouch for anything else... Or, rather: SciTe got installed into the (x86) directory, so I just *assumed* that it is a 32-bit version. I tried to install SciTe/ConTeXt on a WinXP 32 bit machine. I installed Troy Simpson's Windows installer for SciTe, deleted all filles except SciTe.exe, SciTEGlobal.properties and SciLexer.dll. Then I copied the files from scintillua229-1.zip and from /context/data/scite to the progran directory. The problem remains. Scrolling in my 4000+ lines file crashes SciTe. Without the line import scite-context-user in SciTEGlobal.properties scrolling works without problems. Lutz ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
On 21-10-2011 08:42, Lutz Haseloff wrote: The problem remains. Scrolling in my 4000+ lines file crashes SciTe. Any file or just that one? If only that one, can you send it? (the problem is that there are no error messages in the windows version - that is, i have no clue how to intercept the gui's output) Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
2011/10/21 Hans Hagen pra...@wxs.nl: On 21-10-2011 08:42, Lutz Haseloff wrote: The problem remains. Scrolling in my 4000+ lines file crashes SciTe. Any file or just that one? If only that one, can you send it? Any fairly large tex file (about 3000 lines). If I rename the files to *.text, scrolling works. The same effect I get if I select a large chunk of the text and do Shift-F11 wrap. (the problem is that there are no error messages in the windows version - that is, i have no clue how to intercept the gui's output) Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
On 21-10-2011 11:35, Lutz Haseloff wrote: 2011/10/21 Hans Hagenpra...@wxs.nl: On 21-10-2011 08:42, Lutz Haseloff wrote: The problem remains. Scrolling in my 4000+ lines file crashes SciTe. Any file or just that one? If only that one, can you send it? Any fairly large tex file (about 3000 lines). If I rename the files to *.text, scrolling works. The same effect I get if I select a large chunk of the text and do Shift-F11 wrap. The lexer gets pretty large chunks (basically from start to current) .. a good test is to go to the end of the document which lexes the whole; after that some sort of whitespace analysis determines what local (nested) lexer to use .. at least that's what the basic lexing framework does ... I'm still wondering if I should redo that part (I already rewrote some of the lua code to be more efficient). Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
Hi Mari, if i install SciTe and the the ConTeXt files for SciTe on my Win 7 64 bit, i can no longer scroll the text in the editor. Windows quits SciTe because of an unknown error :-( Has someone else the same error? Greetings Lutz 2011/10/19 Mari Voipio mari.voi...@iki.fi: Hello! At the recent ConTeXt meeting Hans helped me update my ConTeXt installation and explained about a new way of getting ConTeXt to work with SciTe, it now uses external lexers and even spell-checking is now possible for some languages. The SciTe tips and tricks page will have to wait, but I made a new wiki page for the installation instructions. This one isn't linked anywhere yet and the page title should probably be changed before that, but I leave that to wiki admins. My old Simple Windows installation page should probably be unlinked or even deleted after this new and better one has found its proper spot. For now, the new Windows+SciTe page is at http://wiki.contextgarden.net/Windows:_ConTeXt_Suite_with_editor_%28SciTe%29 I checked the instructions by installing the combo on a blank new Win64-laptop (of the cheap and sleazy type, this keyboard drives me nuts!) and it works. It is not exactly out-of-the-box, but nothing a seasoned Windows user or a half-good admin couldn't manage. I assume small .bat scripts could be written to automatize it even further, but I'm no programmer, it is faster for me to do a bit of manual work instead. Hope this helps, Mari (who'll now proceed onwards to write a ConTeXt 101 suite for Windows/Word dummies) ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
On Thu, Oct 20, 2011 at 11:50, Lutz Haseloff lutz.hasel...@googlemail.com wrote: if i install SciTe and the the ConTeXt files for SciTe on my Win 7 64 bit, i can no longer scroll the text in the editor. Windows quits SciTe because of an unknown error :-( Has someone else the same error? Do you have special mouse/scroll software installed? If, which one and whose? Did you try reinstalling it after you installed SciTe? I did notice a scrolling problem, but it is not that bad: I'm using a marble mouse that doesn't have a scroll wheel at all, so I had to install Logitech's software to turn a scroller on and of with the fourth mouse button. That works everywhere else, but not in SciTe - the scroll bar moves, but nothing happens... [Not having scroll wheel drives me nuts, but that was the only pointing device we had of this type that fitted for left hand; a new 'marble' of different brand, with a scroll wheel, has been ordered!] When I first installed the documented combo at ConTeXt User Meeting, I was successfully using a Logitech Bluetooth Travel mouse, but I did *not* have the Logitech software in the laptop. I cannot recall having problems with the right-handed cordless marble mouse, either, not even after installing Logitech Setpoint, it scrolled fine with the scroll wheel - I was quite happy with everything until my elbow forced me to switch to left-handed mousing for now. NB. These experiences were like two beta versions ago, don't know if that makes any difference... I didn't put any external mouse on my test bench computer I used to check the wiki instructions, so I can't say anything about it. If the computer is still on my desk when I'm back at the office on Monday, I can test it a bit, we've got plenty of 'normal' mice floating around. Hans also uses a scroll mouse with his Windows+SciTe combo, so usually these work. My first guess would be some kind of conflict between mouse software and SciTe, but I might be wrong. BTW, if you remove SciTe with the lexers and stuf and reinstall it, but don't put lexers and ConTeXt modifications in the SciTe directory, what happens then? Just my 5 cents, Mari ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
2011/10/20 Mari Voipio mari.voi...@iki.fi: On Thu, Oct 20, 2011 at 11:50, Lutz Haseloff lutz.hasel...@googlemail.com wrote: if i install SciTe and the the ConTeXt files for SciTe on my Win 7 64 bit, i can no longer scroll the text in the editor. Windows quits SciTe because of an unknown error :-( Has someone else the same error? Do you have special mouse/scroll software installed? If, which one and whose? Did you try reinstalling it after you installed SciTe? I use SetPoint by LogiTech. No. It is not only a mouse Problem, dragging the slider down and holding down the PageDown key has the same effect. I did notice a scrolling problem, but it is not that bad: I'm using a marble mouse that doesn't have a scroll wheel at all, so I had to install Logitech's software to turn a scroller on and of with the fourth mouse button. That works everywhere else, but not in SciTe - the scroll bar moves, but nothing happens... [Not having scroll wheel drives me nuts, but that was the only pointing device we had of this type that fitted for left hand; a new 'marble' of different brand, with a scroll wheel, has been ordered!] When I first installed the documented combo at ConTeXt User Meeting, I was successfully using a Logitech Bluetooth Travel mouse, but I did *not* have the Logitech software in the laptop. I cannot recall having problems with the right-handed cordless marble mouse, either, not even after installing Logitech Setpoint, it scrolled fine with the scroll wheel - I was quite happy with everything until my elbow forced me to switch to left-handed mousing for now. NB. These experiences were like two beta versions ago, don't know if that makes any difference... I didn't put any external mouse on my test bench computer I used to check the wiki instructions, so I can't say anything about it. If the computer is still on my desk when I'm back at the office on Monday, I can test it a bit, we've got plenty of 'normal' mice floating around. I will try it without SetPoint. Hans also uses a scroll mouse with his Windows+SciTe combo, so usually these work. My first guess would be some kind of conflict between mouse software and SciTe, but I might be wrong. BTW, if you remove SciTe with the lexers and stuf and reinstall it, but don't put lexers and ConTeXt modifications in the SciTe directory, what happens then? Then it works as expected but without the excellent new syntax highlighting. Just my 5 cents, Mari ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___ ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
On 20-10-2011 10:50, Lutz Haseloff wrote: if i install SciTe and the the ConTeXt files for SciTe on my Win 7 64 bit, i can no longer scroll the text in the editor. Windows quits SciTe because of an unknown error :-( Has someone else the same error? I assume that you installed the lexer lua libs too. I don't know if that one is 64 bit (I'm on a by now pretty old 32 bit machine). Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
[NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
Hello! At the recent ConTeXt meeting Hans helped me update my ConTeXt installation and explained about a new way of getting ConTeXt to work with SciTe, it now uses external lexers and even spell-checking is now possible for some languages. The SciTe tips and tricks page will have to wait, but I made a new wiki page for the installation instructions. This one isn't linked anywhere yet and the page title should probably be changed before that, but I leave that to wiki admins. My old Simple Windows installation page should probably be unlinked or even deleted after this new and better one has found its proper spot. For now, the new Windows+SciTe page is at http://wiki.contextgarden.net/Windows:_ConTeXt_Suite_with_editor_%28SciTe%29 I checked the instructions by installing the combo on a blank new Win64-laptop (of the cheap and sleazy type, this keyboard drives me nuts!) and it works. It is not exactly out-of-the-box, but nothing a seasoned Windows user or a half-good admin couldn't manage. I assume small .bat scripts could be written to automatize it even further, but I'm no programmer, it is faster for me to do a bit of manual work instead. Hope this helps, Mari (who'll now proceed onwards to write a ConTeXt 101 suite for Windows/Word dummies) ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
On 19-10-2011 09:04, Mari Voipio wrote: Hello! At the recent ConTeXt meeting Hans helped me update my ConTeXt installation and explained about a new way of getting ConTeXt to work with SciTe, it now uses external lexers and even spell-checking is now possible for some languages. The SciTe tips and tricks page will have to wait, but I made a new wiki page for the installation instructions. This one isn't linked anywhere yet and the page title should probably be changed before that, but I leave that to wiki admins. My old Simple Windows installation page should probably be unlinked or even deleted after this new and better one has found its proper spot. For now, the new Windows+SciTe page is at http://wiki.contextgarden.net/Windows:_ConTeXt_Suite_with_editor_%28SciTe%29 I checked the instructions by installing the combo on a blank new Win64-laptop (of the cheap and sleazy type, this keyboard drives me nuts!) and it works. It is not exactly out-of-the-box, but nothing a seasoned Windows user or a half-good admin couldn't manage. I assume small .bat scripts could be written to automatize it even further, but I'm no programmer, it is faster for me to do a bit of manual work instead. there is now also a scite-for-osx but someone needs to compile the external lexer lua library as it's only available for windows and linux Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
On 10/19/11 11:49 AM, Hans Hagen wrote: there is now also a scite-for-osx but someone needs to compile the external lexer lua library as it's only available for windows and linux Hans hey, that sounds good - but where can I find it? There's nothing about it on the scintilla page. Or do you mean running scite in X11 on OS X? Thomas ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
Am 19.10.2011 um 11:52 schrieb Thomas A. Schmitz: On 10/19/11 11:49 AM, Hans Hagen wrote: there is now also a scite-for-osx but someone needs to compile the external lexer lua library as it's only available for windows and linux Hans hey, that sounds good - but where can I find it? There's nothing about it on the scintilla page. Or do you mean running scite in X11 on OS X? I've seen it in the app store a few days ago. Haven't tried it, though. Patrick ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
On 10/19/11 11:55 AM, Patrick Gundlach wrote: I've seen it in the app store a few days ago. Haven't tried it, though. Patrick Ah thanks - and right you are! Comes with a price tag of 33.49 € though; not sure if it's worth that... Thomas ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
Re: [NTG-context] For Windows users: ConTeXt + SciTe installation instructions updated
On 19-10-2011 11:57, Thomas A. Schmitz wrote: On 10/19/11 11:55 AM, Patrick Gundlach wrote: I've seen it in the app store a few days ago. Haven't tried it, though. Patrick Ah thanks - and right you are! Comes with a price tag of 33.49 € though; not sure if it's worth that... well, that's how things move forward on apples ... soon all has to go through the app store I guess ... yet another way to keep track of what you use and install ... more problematic is the fact that some day soon apps operate in their private space (there comes a warning with scite that at some point there can be problems/more hassle with opening files due to this requirement) Hans - Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl - ___ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___
