Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
To kill this heartbeat region without rebooting, you can change the UUID of your OCFS2 volume: tunefs.ocfs2 --uuid-reset=0C4AB55FE9314FA5A9F81652FDB9B22D /dev/mapper/volgr1-lvol0 and try again: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/19/2011 05:33 AM, Sunil Mushran wrote: One way this can happen is if one starts the hb manually and then force formats on that volume. The format will generate a new uuid. Once that happens, the hb tool cannot map the region to the device and thus fail to stop it. Right now the easiest option on this box is resetting it. On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -d On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0 ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device name specified was not found while reading uuid There is no /dev/dm-2 mounted. On 10/19/2011 00:27, Sunil Mushran wrote: mount -t debugfs debugfs /sys/kernel/debug Then list that dir. Also, do: ocfs2_hb_ctl -l -d /dev/dm-2 Be careful before killing. We want to be sure that dev is not mounted. On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess? ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: What does this return? cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev Also, do: ls -lR /sys/kernel/debug/ocfs2 ls -lR /sys/kernel/debug/o2dlm On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: Here is the output: ls -lR /sys/kernel/config/cluster /sys/kernel/config/cluster: total 0 drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER /sys/kernel/config/cluster/CLUSTER: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms drwxr-xr-x 4 root root0 Oct 11 20:23 node -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms /sys/kernel/config/cluster/CLUSTER/heartbeat: total 0 drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/*918673F06F8F4ED188DDCE14F39945F6*: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev -r--r--r-- 1 root root 4096 Oct 19 00:12 pid -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block /sys/kernel/config/cluster/CLUSTER/node: total 0 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 drwxr-xr-x 2
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
OK. Problem solved by running: |# tunefs.ocfs2 --uuid-reset=72EF09EA3D0D4F51BDC00B47432B1EB2 /dev/drbd1 WARNING!!! OCFS2 uses the UUID to uniquely identify a file system. Having two OCFS2 file systems with the same UUID could, in the least, cause erratic behavior, and if unlucky, cause file system damage. Please choose the UUID with care. Update the UUID ?yes| More details here: http://serverfault.com/a/460944/59925 On 12/25/2012 12:35 AM, quanta wrote: I accidentally re-formated the volume. Is there any way to get rid of this problem without rebooting: # mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/sdb ocfs2 o2cb 12963EAF4E16484DB81ECB0251177C26 ocfs2_drbd1 /dev/drbd1ocfs2 o2cb 12963EAF4E16484DB81ECB0251177C26 ocfs2_drbd1 # ls -l /sys/kernel/config/cluster/cpc/heartbeat/ drwxr-xr-x 2 root root0 Dec 24 22:53 72EF09EA3D0D4F51BDC00B47432B1EB2 # ocfs2_hb_ctl -I -u 72EF09EA3D0D4F51BDC00B47432B1EB2 72EF09EA3D0D4F51BDC00B47432B1EB2: 7 refs # ocfs2_hb_ctl -K -u 72EF09EA3D0D4F51BDC00B47432B1EB2 ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat On 10/19/2011 01:33, Sunil Mushran wrote: >/ One way this can happen is if one starts the hb manually and then force />/ formats on that volume. The format will generate a new uuid. Once that />/ happens, the hb tool cannot map the region to the device and thus fail />/ to stop it. Right now the easiest option on this box is resetting it. />/ />/ On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: />>/ Yes, i did reformat it(even more than once i think, last week). This />>/ is a pre-production system and i'm trying various options before />>/ moving into real life. />>/ />>/ />>/ On 10/19/2011 01:19, Sunil Mushran wrote: />>>/ Did you reformat the volume recently? or, when did you format last? />>>/ />>>/ On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: // well..this is weird // ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ // *918673F06F8F4ED188DDCE14F39945F6* dead_threshold // // looks like we have different UUIDs. Where is this coming from?? // // ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 // 918673F06F8F4ED188DDCE14F39945F6: 1 refs // // // On 10/19/2011 01:04, Sunil Mushran wrote: />/ Let's do it by hand. />/ rm -rf />/ /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D />/ * />/ />/ On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: />>/ ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D />>/ ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping />>/ heartbeat />>/ />>/ No improvment :( />>/ />>/ />>/ On 10/19/2011 00:50, Sunil Mushran wrote: />>>/ See if this cleans it up. />>>/ ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D />>>/ />>>/ On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: // ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D // 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs // // // On 10/19/2011 00:43, Sunil Mushran wrote: />/ ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D />/ />/ On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: />>/ mounted.ocfs2 -d />>/ DeviceFS Stack />>/ UUID Label />>/ /dev/mapper/volgr1-lvol0 ocfs2 o2cb />>/ 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 />>/ />>/ mounted.ocfs2 -f />>/ DeviceFS Nodes />>/ /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 />>/ />>/ ro02xsrv001 = the other node in the cluster. />>/ />>/ By the way, there is no /dev/md-2 />>/ ls /dev/dm-* />>/ /dev/dm-0 /dev/dm-1 />>/ />>/ />>/ On 10/19/2011 00:37, Sunil Mushran wrote: />>>/ So it is not mounted. But we still have a hb thread because />>>/ hb could not be stopped during umount. The reason for that />>>/ could be the same that causes ocfs2_hb_ctl to fail. />>>/ />>>/ Do: />>>/ mounted.ocfs2 -d />>>/ />>>/ On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: // ls -lR /sys/kernel/debug/ocfs2 // /sys/kernel/debug/ocfs2: // total 0 // // ls -lR /sys/kernel/debug/o2dlm // /sys/kernel/debug/o2dlm: // total 0 // // ocfs2_hb_ctl -I -d /dev/dm-2 // ocfs2_hb_ctl: Device name specified was not found while // reading uuid // // There is no /dev/dm-2 mounted. // // // On 10/19/2011 00:27, Sunil Mushran wrote: />/ mount -t debugfs debugfs /sys/kernel/debug />/ />/ Then list that dir. /
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
I accidentally re-formated the volume. Is there any way to get rid of this problem without rebooting: # mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/sdb ocfs2 o2cb 12963EAF4E16484DB81ECB0251177C26 ocfs2_drbd1 /dev/drbd1ocfs2 o2cb 12963EAF4E16484DB81ECB0251177C26 ocfs2_drbd1 # ls -l /sys/kernel/config/cluster/cpc/heartbeat/ drwxr-xr-x 2 root root0 Dec 24 22:53 72EF09EA3D0D4F51BDC00B47432B1EB2 # ocfs2_hb_ctl -I -u 72EF09EA3D0D4F51BDC00B47432B1EB2 72EF09EA3D0D4F51BDC00B47432B1EB2: 7 refs # ocfs2_hb_ctl -K -u 72EF09EA3D0D4F51BDC00B47432B1EB2 ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat On 10/19/2011 01:33, Sunil Mushran wrote: / One way this can happen is if one starts the hb manually and then force />/ formats on that volume. The format will generate a new uuid. Once that />/ happens, the hb tool cannot map the region to the device and thus fail />/ to stop it. Right now the easiest option on this box is resetting it. />/ />/ On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: />>/ Yes, i did reformat it(even more than once i think, last week). This />>/ is a pre-production system and i'm trying various options before />>/ moving into real life. />>/ />>/ />>/ On 10/19/2011 01:19, Sunil Mushran wrote: />>>/ Did you reformat the volume recently? or, when did you format last? />>>/ />>>/ On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: // well..this is weird // ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ // *918673F06F8F4ED188DDCE14F39945F6* dead_threshold // // looks like we have different UUIDs. Where is this coming from?? // // ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 // 918673F06F8F4ED188DDCE14F39945F6: 1 refs // // // On 10/19/2011 01:04, Sunil Mushran wrote: />/ Let's do it by hand. />/ rm -rf />/ /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D />/ * />/ />/ On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: />>/ ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D />>/ ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping />>/ heartbeat />>/ />>/ No improvment :( />>/ />>/ />>/ On 10/19/2011 00:50, Sunil Mushran wrote: />>>/ See if this cleans it up. />>>/ ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D />>>/ />>>/ On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: // ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D // 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs // // // On 10/19/2011 00:43, Sunil Mushran wrote: />/ ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D />/ />/ On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: />>/ mounted.ocfs2 -d />>/ DeviceFS Stack />>/ UUID Label />>/ /dev/mapper/volgr1-lvol0 ocfs2 o2cb />>/ 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 />>/ />>/ mounted.ocfs2 -f />>/ DeviceFS Nodes />>/ /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 />>/ />>/ ro02xsrv001 = the other node in the cluster. />>/ />>/ By the way, there is no /dev/md-2 />>/ ls /dev/dm-* />>/ /dev/dm-0 /dev/dm-1 />>/ />>/ />>/ On 10/19/2011 00:37, Sunil Mushran wrote: />>>/ So it is not mounted. But we still have a hb thread because />>>/ hb could not be stopped during umount. The reason for that />>>/ could be the same that causes ocfs2_hb_ctl to fail. />>>/ />>>/ Do: />>>/ mounted.ocfs2 -d />>>/ />>>/ On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: // ls -lR /sys/kernel/debug/ocfs2 // /sys/kernel/debug/ocfs2: // total 0 // // ls -lR /sys/kernel/debug/o2dlm // /sys/kernel/debug/o2dlm: // total 0 // // ocfs2_hb_ctl -I -d /dev/dm-2 // ocfs2_hb_ctl: Device name specified was not found while // reading uuid // // There is no /dev/dm-2 mounted. // // // On 10/19/2011 00:27, Sunil Mushran wrote: />/ mount -t debugfs debugfs /sys/kernel/debug />/ />/ Then list that dir. />/ />/ Also, do: />/ ocfs2_hb_ctl -l -d /dev/dm-2 />/ />/ Be careful before killing. We want to be sure that dev is />/ not mounted. />/ />/ On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: />>/ Again the outputs: />>/ cat />>/ /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev />
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
Hi Sunil, Maybe you remember the bellow thread. Shortly the pb was that heartbeat region was still active after umounting the ocfs volume(i use latest UEK + ocfs2-tools). Based on this link http://markmail.org/message/7h7r32avuitqdhzr#query:+page:1+mid:lq7arecz2dui6b3v+state:results i manually created /dev/dm-2 symlink to point to my SAN device [/dev/mapper/volgr1-lvol0] and the hearbeat was stopped normally. Maybe it helps you find the real issue. As i understand that symlink should be automatically created but it seems the pb is still there in ocfs2-tools-1.6.3-2.el5. br, laurentiu. On 10/24/2011 23:54, Sunil Mushran wrote: Well, I wouldn't advice you to go into prod with this problem. To figure out the issue, we'll need to provide a debug version of ocfs2_hb_ctl. If you have support, ping oracle support and ask for assistance. If not, download the source and run ocfs2_hb_ctl in gdb. The problem is in the code path that begins in the function lookup_dev(). On 10/23/2011 01:30 PM, Laurentiu Gosu wrote: #rpm -qa |grep ocfs2 ocfs2console-1.6.3-2.el5 ocfs2-tools-1.6.3-2.el5 Just let me know if I can give more details to find the problem. I will move ocfs2 into production in the next weeks. On 10/23/2011 22:49, Sunil Mushran wrote: Are you sure you have ocfs2-tools-1.6.3? I remember we had an issue with this with an earlier release... 1.6.1/.2. On 10/23/2011 10:43 AM, Laurentiu Gosu wrote: hmm.. #ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs *BUT:* #ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat I can still kill the ref using device name (-d). On 10/23/2011 17:57, Sunil Mushran wrote: I think it stops by uuid. So try doing this the next time. You are encountering some issue that we have not seen before. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 On 10/23/2011 05:32 AM, Laurentiu Gosu wrote: Hi Sunil, Sorry for my late reply, i just had time today to start from scratch and test. I rebuilt my environment(2 nodes connected to a SAN via iSCSI+multipath). I still have the issue that the heartbeat is active after I umount my ocfs2 volume. /etc/init.d/o2cb stop Stopping O2CB cluster CLUST: Failed Unable to stop cluster as heartbeat region still active ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs After i manually kill the ref (ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2 ) i can stop successfully o2cb. I can live with that but why doesn't it stop automatically? As i understand, hearbeat should be started and stopped once the volume gets mounted/umounted. br, Laurentiu. On 10/19/2011 02:28, Sunil Mushran wrote: Manual delete will only work if there are no references. In your case there are references. You may want to start both nodes from scratch. Do not start/stop heartbeat manually. Also, do not force-format. On 10/18/2011 03:54 PM, Laurentiu Gosu wrote: OK, i rebooted one of the nodes(both had similar issues); . But something is still fishy. - i mounted the device: mount -t ocfs2 /dev/volgr1/lvol0 /mnt/tmp/ - i unmount it: umount /mnt/tmp/ - tried to stop o2cb: /etc/init.d/o2cb stop Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active - ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs - ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat - ls -Rl /sys/kernel/config/cluster/CLUSTER/heartbeat/ /sys/kernel/config/cluster/CLUSTER/heartbeat/: total 0 drwxr-xr-x 2 root root0 Oct 19 01:50 0C4AB55FE9314FA5A9F81652FDB9B22D -rw-r--r-- 1 root root 4096 Oct 19 01:40 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D: total 0 -rw-r--r-- 1 root root 4096 Oct 19 01:50 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 01:50 blocks -rw-r--r-- 1 root root 4096 Oct 19 01:50 dev -r--r--r-- 1 root root 4096 Oct 19 01:50 pid -rw-r--r-- 1 root root 4096 Oct 19 01:50 start_block - i cannot manually delete /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D/ PS: i'm going to sleep now, i have to be up in a few hours. We can continue tomorrow if it's ok with you. Thank you for your help. Laurentiu. On 10/19/2011 01:33, Sunil Mushran wrote: One way this can happen is if one starts the hb manually and then force formats on that volume. The format will generate a new uuid. Once that happens, the hb tool cannot map the region to the device and thus fail to stop it. Right now the easiest option on this box is resetting it. On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
#rpm -qa |grep ocfs2 ocfs2console-1.6.3-2.el5 ocfs2-tools-1.6.3-2.el5 Just let me know if I can give more details to find the problem. I will move ocfs2 into production in the next weeks. On 10/23/2011 22:49, Sunil Mushran wrote: Are you sure you have ocfs2-tools-1.6.3? I remember we had an issue with this with an earlier release... 1.6.1/.2. On 10/23/2011 10:43 AM, Laurentiu Gosu wrote: hmm.. #ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs *BUT:* #ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat I can still kill the ref using device name (-d). On 10/23/2011 17:57, Sunil Mushran wrote: I think it stops by uuid. So try doing this the next time. You are encountering some issue that we have not seen before. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 On 10/23/2011 05:32 AM, Laurentiu Gosu wrote: Hi Sunil, Sorry for my late reply, i just had time today to start from scratch and test. I rebuilt my environment(2 nodes connected to a SAN via iSCSI+multipath). I still have the issue that the heartbeat is active after I umount my ocfs2 volume. /etc/init.d/o2cb stop Stopping O2CB cluster CLUST: Failed Unable to stop cluster as heartbeat region still active ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs After i manually kill the ref (ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2 ) i can stop successfully o2cb. I can live with that but why doesn't it stop automatically? As i understand, hearbeat should be started and stopped once the volume gets mounted/umounted. br, Laurentiu. On 10/19/2011 02:28, Sunil Mushran wrote: Manual delete will only work if there are no references. In your case there are references. You may want to start both nodes from scratch. Do not start/stop heartbeat manually. Also, do not force-format. On 10/18/2011 03:54 PM, Laurentiu Gosu wrote: OK, i rebooted one of the nodes(both had similar issues); . But something is still fishy. - i mounted the device: mount -t ocfs2 /dev/volgr1/lvol0 /mnt/tmp/ - i unmount it: umount /mnt/tmp/ - tried to stop o2cb: /etc/init.d/o2cb stop Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active - ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs - ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat - ls -Rl /sys/kernel/config/cluster/CLUSTER/heartbeat/ /sys/kernel/config/cluster/CLUSTER/heartbeat/: total 0 drwxr-xr-x 2 root root0 Oct 19 01:50 0C4AB55FE9314FA5A9F81652FDB9B22D -rw-r--r-- 1 root root 4096 Oct 19 01:40 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D: total 0 -rw-r--r-- 1 root root 4096 Oct 19 01:50 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 01:50 blocks -rw-r--r-- 1 root root 4096 Oct 19 01:50 dev -r--r--r-- 1 root root 4096 Oct 19 01:50 pid -rw-r--r-- 1 root root 4096 Oct 19 01:50 start_block - i cannot manually delete /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D/ PS: i'm going to sleep now, i have to be up in a few hours. We can continue tomorrow if it's ok with you. Thank you for your help. Laurentiu. On 10/19/2011 01:33, Sunil Mushran wrote: One way this can happen is if one starts the hb manually and then force formats on that volume. The format will generate a new uuid. Once that happens, the hb tool cannot map the region to the device and thus fail to stop it. Right now the easiest option on this box is resetting it. On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran w
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
Are you sure you have ocfs2-tools-1.6.3? I remember we had an issue with this with an earlier release... 1.6.1/.2. On 10/23/2011 10:43 AM, Laurentiu Gosu wrote: hmm.. #ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs *BUT:* #ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat I can still kill the ref using device name (-d). On 10/23/2011 17:57, Sunil Mushran wrote: I think it stops by uuid. So try doing this the next time. You are encountering some issue that we have not seen before. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 On 10/23/2011 05:32 AM, Laurentiu Gosu wrote: Hi Sunil, Sorry for my late reply, i just had time today to start from scratch and test. I rebuilt my environment(2 nodes connected to a SAN via iSCSI+multipath). I still have the issue that the heartbeat is active after I umount my ocfs2 volume. /etc/init.d/o2cb stop Stopping O2CB cluster CLUST: Failed Unable to stop cluster as heartbeat region still active ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs After i manually kill the ref (ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2 ) i can stop successfully o2cb. I can live with that but why doesn't it stop automatically? As i understand, hearbeat should be started and stopped once the volume gets mounted/umounted. br, Laurentiu. On 10/19/2011 02:28, Sunil Mushran wrote: Manual delete will only work if there are no references. In your case there are references. You may want to start both nodes from scratch. Do not start/stop heartbeat manually. Also, do not force-format. On 10/18/2011 03:54 PM, Laurentiu Gosu wrote: OK, i rebooted one of the nodes(both had similar issues); . But something is still fishy. - i mounted the device: mount -t ocfs2 /dev/volgr1/lvol0 /mnt/tmp/ - i unmount it: umount /mnt/tmp/ - tried to stop o2cb: /etc/init.d/o2cb stop Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active - ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs - ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat - ls -Rl /sys/kernel/config/cluster/CLUSTER/heartbeat/ /sys/kernel/config/cluster/CLUSTER/heartbeat/: total 0 drwxr-xr-x 2 root root0 Oct 19 01:50 0C4AB55FE9314FA5A9F81652FDB9B22D -rw-r--r-- 1 root root 4096 Oct 19 01:40 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D: total 0 -rw-r--r-- 1 root root 4096 Oct 19 01:50 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 01:50 blocks -rw-r--r-- 1 root root 4096 Oct 19 01:50 dev -r--r--r-- 1 root root 4096 Oct 19 01:50 pid -rw-r--r-- 1 root root 4096 Oct 19 01:50 start_block - i cannot manually delete /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D/ PS: i'm going to sleep now, i have to be up in a few hours. We can continue tomorrow if it's ok with you. Thank you for your help. Laurentiu. On 10/19/2011 01:33, Sunil Mushran wrote: One way this can happen is if one starts the hb manually and then force formats on that volume. The format will generate a new uuid. Once that happens, the hb tool cannot map the region to the device and thus fail to stop it. Right now the easiest option on this box is resetting it. On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
hmm.. #ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs *BUT:* #ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat I can still kill the ref using device name (-d). On 10/23/2011 17:57, Sunil Mushran wrote: I think it stops by uuid. So try doing this the next time. You are encountering some issue that we have not seen before. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 On 10/23/2011 05:32 AM, Laurentiu Gosu wrote: Hi Sunil, Sorry for my late reply, i just had time today to start from scratch and test. I rebuilt my environment(2 nodes connected to a SAN via iSCSI+multipath). I still have the issue that the heartbeat is active after I umount my ocfs2 volume. /etc/init.d/o2cb stop Stopping O2CB cluster CLUST: Failed Unable to stop cluster as heartbeat region still active ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs After i manually kill the ref (ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2 ) i can stop successfully o2cb. I can live with that but why doesn't it stop automatically? As i understand, hearbeat should be started and stopped once the volume gets mounted/umounted. br, Laurentiu. On 10/19/2011 02:28, Sunil Mushran wrote: Manual delete will only work if there are no references. In your case there are references. You may want to start both nodes from scratch. Do not start/stop heartbeat manually. Also, do not force-format. On 10/18/2011 03:54 PM, Laurentiu Gosu wrote: OK, i rebooted one of the nodes(both had similar issues); . But something is still fishy. - i mounted the device: mount -t ocfs2 /dev/volgr1/lvol0 /mnt/tmp/ - i unmount it: umount /mnt/tmp/ - tried to stop o2cb: /etc/init.d/o2cb stop Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active - ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs - ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat - ls -Rl /sys/kernel/config/cluster/CLUSTER/heartbeat/ /sys/kernel/config/cluster/CLUSTER/heartbeat/: total 0 drwxr-xr-x 2 root root0 Oct 19 01:50 0C4AB55FE9314FA5A9F81652FDB9B22D -rw-r--r-- 1 root root 4096 Oct 19 01:40 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D: total 0 -rw-r--r-- 1 root root 4096 Oct 19 01:50 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 01:50 blocks -rw-r--r-- 1 root root 4096 Oct 19 01:50 dev -r--r--r-- 1 root root 4096 Oct 19 01:50 pid -rw-r--r-- 1 root root 4096 Oct 19 01:50 start_block - i cannot manually delete /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D/ PS: i'm going to sleep now, i have to be up in a few hours. We can continue tomorrow if it's ok with you. Thank you for your help. Laurentiu. On 10/19/2011 01:33, Sunil Mushran wrote: One way this can happen is if one starts the hb manually and then force formats on that volume. The format will generate a new uuid. Once that happens, the hb tool cannot map the region to the device and thus fail to stop it. Right now the easiest option on this box is resetting it. On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the oth
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
I think it stops by uuid. So try doing this the next time. You are encountering some issue that we have not seen before. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 On 10/23/2011 05:32 AM, Laurentiu Gosu wrote: Hi Sunil, Sorry for my late reply, i just had time today to start from scratch and test. I rebuilt my environment(2 nodes connected to a SAN via iSCSI+multipath). I still have the issue that the heartbeat is active after I umount my ocfs2 volume. /etc/init.d/o2cb stop Stopping O2CB cluster CLUST: Failed Unable to stop cluster as heartbeat region still active ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs After i manually kill the ref (ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2 ) i can stop successfully o2cb. I can live with that but why doesn't it stop automatically? As i understand, hearbeat should be started and stopped once the volume gets mounted/umounted. br, Laurentiu. On 10/19/2011 02:28, Sunil Mushran wrote: Manual delete will only work if there are no references. In your case there are references. You may want to start both nodes from scratch. Do not start/stop heartbeat manually. Also, do not force-format. On 10/18/2011 03:54 PM, Laurentiu Gosu wrote: OK, i rebooted one of the nodes(both had similar issues); . But something is still fishy. - i mounted the device: mount -t ocfs2 /dev/volgr1/lvol0 /mnt/tmp/ - i unmount it: umount /mnt/tmp/ - tried to stop o2cb: /etc/init.d/o2cb stop Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active - ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs - ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat - ls -Rl /sys/kernel/config/cluster/CLUSTER/heartbeat/ /sys/kernel/config/cluster/CLUSTER/heartbeat/: total 0 drwxr-xr-x 2 root root0 Oct 19 01:50 0C4AB55FE9314FA5A9F81652FDB9B22D -rw-r--r-- 1 root root 4096 Oct 19 01:40 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D: total 0 -rw-r--r-- 1 root root 4096 Oct 19 01:50 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 01:50 blocks -rw-r--r-- 1 root root 4096 Oct 19 01:50 dev -r--r--r-- 1 root root 4096 Oct 19 01:50 pid -rw-r--r-- 1 root root 4096 Oct 19 01:50 start_block - i cannot manually delete /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D/ PS: i'm going to sleep now, i have to be up in a few hours. We can continue tomorrow if it's ok with you. Thank you for your help. Laurentiu. On 10/19/2011 01:33, Sunil Mushran wrote: One way this can happen is if one starts the hb manually and then force formats on that volume. The format will generate a new uuid. Once that happens, the hb tool cannot map the region to the device and thus fail to stop it. Right now the easiest option on this box is resetting it. On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
Hi Sunil, Sorry for my late reply, i just had time today to start from scratch and test. I rebuilt my environment(2 nodes connected to a SAN via iSCSI+multipath). I still have the issue that the heartbeat is active after I umount my ocfs2 volume. /etc/init.d/o2cb stop Stopping O2CB cluster CLUST: Failed Unable to stop cluster as heartbeat region still active ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs After i manually kill the ref (ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2 ) i can stop successfully o2cb. I can live with that but why doesn't it stop automatically? As i understand, hearbeat should be started and stopped once the volume gets mounted/umounted. br, Laurentiu. On 10/19/2011 02:28, Sunil Mushran wrote: Manual delete will only work if there are no references. In your case there are references. You may want to start both nodes from scratch. Do not start/stop heartbeat manually. Also, do not force-format. On 10/18/2011 03:54 PM, Laurentiu Gosu wrote: OK, i rebooted one of the nodes(both had similar issues); . But something is still fishy. - i mounted the device: mount -t ocfs2 /dev/volgr1/lvol0 /mnt/tmp/ - i unmount it: umount /mnt/tmp/ - tried to stop o2cb: /etc/init.d/o2cb stop Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active - ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs - ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat - ls -Rl /sys/kernel/config/cluster/CLUSTER/heartbeat/ /sys/kernel/config/cluster/CLUSTER/heartbeat/: total 0 drwxr-xr-x 2 root root0 Oct 19 01:50 0C4AB55FE9314FA5A9F81652FDB9B22D -rw-r--r-- 1 root root 4096 Oct 19 01:40 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D: total 0 -rw-r--r-- 1 root root 4096 Oct 19 01:50 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 01:50 blocks -rw-r--r-- 1 root root 4096 Oct 19 01:50 dev -r--r--r-- 1 root root 4096 Oct 19 01:50 pid -rw-r--r-- 1 root root 4096 Oct 19 01:50 start_block - i cannot manually delete /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D/ PS: i'm going to sleep now, i have to be up in a few hours. We can continue tomorrow if it's ok with you. Thank you for your help. Laurentiu. On 10/19/2011 01:33, Sunil Mushran wrote: One way this can happen is if one starts the hb manually and then force formats on that volume. The format will generate a new uuid. Once that happens, the hb tool cannot map the region to the device and thus fail to stop it. Right now the easiest option on this box is resetting it. On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -d On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0 ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
Manual delete will only work if there are no references. In your case there are references. You may want to start both nodes from scratch. Do not start/stop heartbeat manually. Also, do not force-format. On 10/18/2011 03:54 PM, Laurentiu Gosu wrote: OK, i rebooted one of the nodes(both had similar issues); . But something is still fishy. - i mounted the device: mount -t ocfs2 /dev/volgr1/lvol0 /mnt/tmp/ - i unmount it: umount /mnt/tmp/ - tried to stop o2cb: /etc/init.d/o2cb stop Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active - ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs - ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat - ls -Rl /sys/kernel/config/cluster/CLUSTER/heartbeat/ /sys/kernel/config/cluster/CLUSTER/heartbeat/: total 0 drwxr-xr-x 2 root root0 Oct 19 01:50 0C4AB55FE9314FA5A9F81652FDB9B22D -rw-r--r-- 1 root root 4096 Oct 19 01:40 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D: total 0 -rw-r--r-- 1 root root 4096 Oct 19 01:50 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 01:50 blocks -rw-r--r-- 1 root root 4096 Oct 19 01:50 dev -r--r--r-- 1 root root 4096 Oct 19 01:50 pid -rw-r--r-- 1 root root 4096 Oct 19 01:50 start_block - i cannot manually delete /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D/ PS: i'm going to sleep now, i have to be up in a few hours. We can continue tomorrow if it's ok with you. Thank you for your help. Laurentiu. On 10/19/2011 01:33, Sunil Mushran wrote: One way this can happen is if one starts the hb manually and then force formats on that volume. The format will generate a new uuid. Once that happens, the hb tool cannot map the region to the device and thus fail to stop it. Right now the easiest option on this box is resetting it. On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -d On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0 ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device name specified was not found while reading uuid There is no /dev/dm-2 mounted. On 10/19/2011 00:27, Sunil Mushran wrote: mount -t debugfs debugfs /sys/kernel/debug Then list that dir. Also, do: ocfs2_hb_ctl -l -d /dev/dm-2 Be careful before killing. We want to be sure that dev is not mounted. On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess? ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: What does
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
OK, i rebooted one of the nodes(both had similar issues); . But something is still fishy. - i mounted the device: mount -t ocfs2 /dev/volgr1/lvol0 /mnt/tmp/ - i unmount it: umount /mnt/tmp/ - tried to stop o2cb: /etc/init.d/o2cb stop Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active - ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 1 refs - ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat - ls -Rl /sys/kernel/config/cluster/CLUSTER/heartbeat/ /sys/kernel/config/cluster/CLUSTER/heartbeat/: total 0 drwxr-xr-x 2 root root0 Oct 19 01:50 0C4AB55FE9314FA5A9F81652FDB9B22D -rw-r--r-- 1 root root 4096 Oct 19 01:40 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D: total 0 -rw-r--r-- 1 root root 4096 Oct 19 01:50 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 01:50 blocks -rw-r--r-- 1 root root 4096 Oct 19 01:50 dev -r--r--r-- 1 root root 4096 Oct 19 01:50 pid -rw-r--r-- 1 root root 4096 Oct 19 01:50 start_block - i cannot manually delete /sys/kernel/config/cluster/CLUSTER/heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D/ PS: i'm going to sleep now, i have to be up in a few hours. We can continue tomorrow if it's ok with you. Thank you for your help. Laurentiu. On 10/19/2011 01:33, Sunil Mushran wrote: One way this can happen is if one starts the hb manually and then force formats on that volume. The format will generate a new uuid. Once that happens, the hb tool cannot map the region to the device and thus fail to stop it. Right now the easiest option on this box is resetting it. On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -d On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0 ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device name specified was not found while reading uuid There is no /dev/dm-2 mounted. On 10/19/2011 00:27, Sunil Mushran wrote: mount -t debugfs debugfs /sys/kernel/debug Then list that dir. Also, do: ocfs2_hb_ctl -l -d /dev/dm-2 Be careful before killing. We want to be sure that dev is not mounted. On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess? ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: What does this return? cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev Also, do: ls -lR /sys/kernel/debug/ocfs2 ls -lR /sys/kernel/debug/o2dlm On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: Here is the outpu
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
One way this can happen is if one starts the hb manually and then force formats on that volume. The format will generate a new uuid. Once that happens, the hb tool cannot map the region to the device and thus fail to stop it. Right now the easiest option on this box is resetting it. On 10/18/2011 03:24 PM, Laurentiu Gosu wrote: Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -d On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0 ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device name specified was not found while reading uuid There is no /dev/dm-2 mounted. On 10/19/2011 00:27, Sunil Mushran wrote: mount -t debugfs debugfs /sys/kernel/debug Then list that dir. Also, do: ocfs2_hb_ctl -l -d /dev/dm-2 Be careful before killing. We want to be sure that dev is not mounted. On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess? ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: What does this return? cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev Also, do: ls -lR /sys/kernel/debug/ocfs2 ls -lR /sys/kernel/debug/o2dlm On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: Here is the output: ls -lR /sys/kernel/config/cluster /sys/kernel/config/cluster: total 0 drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER /sys/kernel/config/cluster/CLUSTER: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms drwxr-xr-x 4 root root0 Oct 11 20:23 node -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms /sys/kernel/config/cluster/CLUSTER/heartbeat: total 0 drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/*918673F06F8F4ED188DDCE14F39945F6*: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev -r--r--r-- 1 root root 4096 Oct 19 00:12 pid -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block /sys/kernel/config/cluster/CLUSTER/node: total 0 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num /sys/kernel/
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
Yes, i did reformat it(even more than once i think, last week). This is a pre-production system and i'm trying various options before moving into real life. On 10/19/2011 01:19, Sunil Mushran wrote: Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -d On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0 ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device name specified was not found while reading uuid There is no /dev/dm-2 mounted. On 10/19/2011 00:27, Sunil Mushran wrote: mount -t debugfs debugfs /sys/kernel/debug Then list that dir. Also, do: ocfs2_hb_ctl -l -d /dev/dm-2 Be careful before killing. We want to be sure that dev is not mounted. On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess? ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: What does this return? cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev Also, do: ls -lR /sys/kernel/debug/ocfs2 ls -lR /sys/kernel/debug/o2dlm On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: Here is the output: ls -lR /sys/kernel/config/cluster /sys/kernel/config/cluster: total 0 drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER /sys/kernel/config/cluster/CLUSTER: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms drwxr-xr-x 4 root root0 Oct 11 20:23 node -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms /sys/kernel/config/cluster/CLUSTER/heartbeat: total 0 drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/*918673F06F8F4ED188DDCE14F39945F6*: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev -r--r--r-- 1 root root 4096 Oct 19 00:12 pid -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block /sys/kernel/config/cluster/CLUSTER/node: total 0 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num On 10/19/2011 00:12, Sunil Mushran wrote: ls -lR /sys/kernel/conf
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
Did you reformat the volume recently? or, when did you format last? On 10/18/2011 03:13 PM, Laurentiu Gosu wrote: well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -d On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0 ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device name specified was not found while reading uuid There is no /dev/dm-2 mounted. On 10/19/2011 00:27, Sunil Mushran wrote: mount -t debugfs debugfs /sys/kernel/debug Then list that dir. Also, do: ocfs2_hb_ctl -l -d /dev/dm-2 Be careful before killing. We want to be sure that dev is not mounted. On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess? ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: What does this return? cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev Also, do: ls -lR /sys/kernel/debug/ocfs2 ls -lR /sys/kernel/debug/o2dlm On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: Here is the output: ls -lR /sys/kernel/config/cluster /sys/kernel/config/cluster: total 0 drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER /sys/kernel/config/cluster/CLUSTER: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms drwxr-xr-x 4 root root0 Oct 11 20:23 node -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms /sys/kernel/config/cluster/CLUSTER/heartbeat: total 0 drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/*918673F06F8F4ED188DDCE14F39945F6*: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev -r--r--r-- 1 root root 4096 Oct 19 00:12 pid -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block /sys/kernel/config/cluster/CLUSTER/node: total 0 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num On 10/19/2011 00:12, Sunil Mushran wrote: ls -lR /sys/kernel/config/cluster What does this return? On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: Hi, I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. My problem is that
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
well..this is weird ls /sys/kernel/config/cluster/CLUSTER/heartbeat/ *918673F06F8F4ED188DDCE14F39945F6* dead_threshold looks like we have different UUIDs. Where is this coming from?? ocfs2_hb_ctl -I -u 918673F06F8F4ED188DDCE14F39945F6 918673F06F8F4ED188DDCE14F39945F6: 1 refs On 10/19/2011 01:04, Sunil Mushran wrote: Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/*0C4AB55FE9314FA5A9F81652FDB9B22D * On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -d On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0 ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device name specified was not found while reading uuid There is no /dev/dm-2 mounted. On 10/19/2011 00:27, Sunil Mushran wrote: mount -t debugfs debugfs /sys/kernel/debug Then list that dir. Also, do: ocfs2_hb_ctl -l -d /dev/dm-2 Be careful before killing. We want to be sure that dev is not mounted. On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess? ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: What does this return? cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev Also, do: ls -lR /sys/kernel/debug/ocfs2 ls -lR /sys/kernel/debug/o2dlm On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: Here is the output: ls -lR /sys/kernel/config/cluster /sys/kernel/config/cluster: total 0 drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER /sys/kernel/config/cluster/CLUSTER: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms drwxr-xr-x 4 root root0 Oct 11 20:23 node -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms /sys/kernel/config/cluster/CLUSTER/heartbeat: total 0 drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/*918673F06F8F4ED188DDCE14F39945F6*: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev -r--r--r-- 1 root root 4096 Oct 19 00:12 pid -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block /sys/kernel/config/cluster/CLUSTER/node: total 0 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num On 10/19/2011 00:12, Sunil Mushran wrote: ls -lR /sys/kernel/config/cluster What does this return? On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: Hi, I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. My problem is that all the time when i try to run /etc/init.d/o2cb stop it fails with this error: Stopping O
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
Let's do it by hand. rm -rf /sys/kernel/config/cluster/.../heartbeat/0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:52 PM, Laurentiu Gosu wrote: > ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D > ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat > > No improvment :( > > > On 10/19/2011 00:50, Sunil Mushran wrote: >> See if this cleans it up. >> ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D >> >> On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: >>> ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D >>> 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs >>> >>> >>> On 10/19/2011 00:43, Sunil Mushran wrote: ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: > mounted.ocfs2 -d > DeviceFS Stack UUID > Label > /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D > ocfs2 > > mounted.ocfs2 -f > DeviceFS Nodes > /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 > > ro02xsrv001 = the other node in the cluster. > > By the way, there is no /dev/md-2 > ls /dev/dm-* > /dev/dm-0 /dev/dm-1 > > > On 10/19/2011 00:37, Sunil Mushran wrote: >> So it is not mounted. But we still have a hb thread because >> hb could not be stopped during umount. The reason for that >> could be the same that causes ocfs2_hb_ctl to fail. >> >> Do: >> mounted.ocfs2 -d >> >> On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: >>> ls -lR /sys/kernel/debug/ocfs2 >>> /sys/kernel/debug/ocfs2: >>> total 0 >>> >>> ls -lR /sys/kernel/debug/o2dlm >>> /sys/kernel/debug/o2dlm: >>> total 0 >>> >>> ocfs2_hb_ctl -I -d /dev/dm-2 >>> ocfs2_hb_ctl: Device name specified was not found while reading uuid >>> >>> There is no /dev/dm-2 mounted. >>> >>> >>> On 10/19/2011 00:27, Sunil Mushran wrote: mount -t debugfs debugfs /sys/kernel/debug Then list that dir. Also, do: ocfs2_hb_ctl -l -d /dev/dm-2 Be careful before killing. We want to be sure that dev is not mounted. On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: > Again the outputs: > cat > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev > dm-2 > --->here should be volgr1-lvol0 i guess? > > ls -lR /sys/kernel/debug/ocfs2 > ls: /sys/kernel/debug/ocfs2: No such file or directory > > ls -lR /sys/kernel/debug/o2dlm > ls: /sys/kernel/debug/o2dlm: No such file or directory > > I think i have to enable debug first somehow..? > > Laurentiu. > > On 10/19/2011 00:17, Sunil Mushran wrote: >> What does this return? >> cat >> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >> >> Also, do: >> ls -lR /sys/kernel/debug/ocfs2 >> ls -lR /sys/kernel/debug/o2dlm >> >> On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: >>> Here is the output: >>> >>> ls -lR /sys/kernel/config/cluster >>> /sys/kernel/config/cluster: >>> total 0 >>> drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER >>> >>> /sys/kernel/config/cluster/CLUSTER: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method >>> drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms >>> drwxr-xr-x 4 root root0 Oct 11 20:23 node >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms >>> >>> /sys/kernel/config/cluster/CLUSTER/heartbeat: >>> total 0 >>> drwxr-xr-x 2 root root0 Oct 19 00:12 >>> 918673F06F8F4ED188DDCE14F39945F6 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold >>> >>> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev >>> -r--r--r-- 1 root root 4096 Oct 19 00:12 pid >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block >>> >>> /sys/kernel/config/cluster/CLUSTER/node: >>> total 0 >>> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 >>> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 >>> >>> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >>> -rw-r--r--
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
See if this cleans it up. ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: > ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D > 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs > > > On 10/19/2011 00:43, Sunil Mushran wrote: >> ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D >> >> On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: >>> mounted.ocfs2 -d >>> DeviceFS Stack UUID Label >>> /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D >>> ocfs2 >>> >>> mounted.ocfs2 -f >>> DeviceFS Nodes >>> /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 >>> >>> ro02xsrv001 = the other node in the cluster. >>> >>> By the way, there is no /dev/md-2 >>> ls /dev/dm-* >>> /dev/dm-0 /dev/dm-1 >>> >>> >>> On 10/19/2011 00:37, Sunil Mushran wrote: So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -d On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: > ls -lR /sys/kernel/debug/ocfs2 > /sys/kernel/debug/ocfs2: > total 0 > > ls -lR /sys/kernel/debug/o2dlm > /sys/kernel/debug/o2dlm: > total 0 > > ocfs2_hb_ctl -I -d /dev/dm-2 > ocfs2_hb_ctl: Device name specified was not found while reading uuid > > There is no /dev/dm-2 mounted. > > > On 10/19/2011 00:27, Sunil Mushran wrote: >> mount -t debugfs debugfs /sys/kernel/debug >> >> Then list that dir. >> >> Also, do: >> ocfs2_hb_ctl -l -d /dev/dm-2 >> >> Be careful before killing. We want to be sure that dev is not mounted. >> >> On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: >>> Again the outputs: >>> cat >>> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >>> dm-2 >>> --->here should be volgr1-lvol0 i guess? >>> >>> ls -lR /sys/kernel/debug/ocfs2 >>> ls: /sys/kernel/debug/ocfs2: No such file or directory >>> >>> ls -lR /sys/kernel/debug/o2dlm >>> ls: /sys/kernel/debug/o2dlm: No such file or directory >>> >>> I think i have to enable debug first somehow..? >>> >>> Laurentiu. >>> >>> On 10/19/2011 00:17, Sunil Mushran wrote: What does this return? cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev Also, do: ls -lR /sys/kernel/debug/ocfs2 ls -lR /sys/kernel/debug/o2dlm On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: > Here is the output: > > ls -lR /sys/kernel/config/cluster > /sys/kernel/config/cluster: > total 0 > drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER > > /sys/kernel/config/cluster/CLUSTER: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method > drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat > -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms > -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms > drwxr-xr-x 4 root root0 Oct 11 20:23 node > -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms > > /sys/kernel/config/cluster/CLUSTER/heartbeat: > total 0 > drwxr-xr-x 2 root root0 Oct 19 00:12 > 918673F06F8F4ED188DDCE14F39945F6 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold > > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes > -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks > -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev > -r--r--r-- 1 root root 4096 Oct 19 00:12 pid > -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block > > /sys/kernel/config/cluster/CLUSTER/node: > total 0 > drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 > drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 > > /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port > -rw-r--r-- 1 root root 4096 Oct 19 00:12 local > -rw-r--r-- 1 root root 4096 Oct 19 00:12 num > > /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port > -rw-r--r-- 1 root root 4096 Oct 19 00:12 local > -rw-r--r-- 1 root root 4096 Oct 19 00:12 num > > > > > On 10/19/2011 00:12, Sunil Mushran wrote: >> ls -lR /sys/kernel/config/
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2_hb_ctl: File not found by ocfs2_lookup while stopping heartbeat No improvment :( On 10/19/2011 00:50, Sunil Mushran wrote: > See if this cleans it up. > ocfs2_hb_ctl -K -u 0C4AB55FE9314FA5A9F81652FDB9B22D > > On 10/18/2011 02:44 PM, Laurentiu Gosu wrote: >> ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D >> 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs >> >> >> On 10/19/2011 00:43, Sunil Mushran wrote: >>> ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D >>> >>> On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: > So it is not mounted. But we still have a hb thread because > hb could not be stopped during umount. The reason for that > could be the same that causes ocfs2_hb_ctl to fail. > > Do: > mounted.ocfs2 -d > > On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: >> ls -lR /sys/kernel/debug/ocfs2 >> /sys/kernel/debug/ocfs2: >> total 0 >> >> ls -lR /sys/kernel/debug/o2dlm >> /sys/kernel/debug/o2dlm: >> total 0 >> >> ocfs2_hb_ctl -I -d /dev/dm-2 >> ocfs2_hb_ctl: Device name specified was not found while reading uuid >> >> There is no /dev/dm-2 mounted. >> >> >> On 10/19/2011 00:27, Sunil Mushran wrote: >>> mount -t debugfs debugfs /sys/kernel/debug >>> >>> Then list that dir. >>> >>> Also, do: >>> ocfs2_hb_ctl -l -d /dev/dm-2 >>> >>> Be careful before killing. We want to be sure that dev is not >>> mounted. >>> >>> On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess? ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: > What does this return? > cat > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev > > Also, do: > ls -lR /sys/kernel/debug/ocfs2 > ls -lR /sys/kernel/debug/o2dlm > > On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: >> Here is the output: >> >> ls -lR /sys/kernel/config/cluster >> /sys/kernel/config/cluster: >> total 0 >> drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER >> >> /sys/kernel/config/cluster/CLUSTER: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method >> drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms >> drwxr-xr-x 4 root root0 Oct 11 20:23 node >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms >> >> /sys/kernel/config/cluster/CLUSTER/heartbeat: >> total 0 >> drwxr-xr-x 2 root root0 Oct 19 00:12 >> 918673F06F8F4ED188DDCE14F39945F6 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold >> >> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: >> >> >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev >> -r--r--r-- 1 root root 4096 Oct 19 00:12 pid >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block >> >> /sys/kernel/config/cluster/CLUSTER/node: >> total 0 >> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 >> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 >> >> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >> >> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: >> total 0 >>
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
ocfs2_hb_ctl -I -u 0C4AB55FE9314FA5A9F81652FDB9B22D 0C4AB55FE9314FA5A9F81652FDB9B22D: 0 refs On 10/19/2011 00:43, Sunil Mushran wrote: > ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D > > On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: >> mounted.ocfs2 -d >> DeviceFS Stack UUID >> Label >> /dev/mapper/volgr1-lvol0 ocfs2 o2cb >> 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 >> >> mounted.ocfs2 -f >> DeviceFS Nodes >> /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 >> >> ro02xsrv001 = the other node in the cluster. >> >> By the way, there is no /dev/md-2 >> ls /dev/dm-* >> /dev/dm-0 /dev/dm-1 >> >> >> On 10/19/2011 00:37, Sunil Mushran wrote: >>> So it is not mounted. But we still have a hb thread because >>> hb could not be stopped during umount. The reason for that >>> could be the same that causes ocfs2_hb_ctl to fail. >>> >>> Do: >>> mounted.ocfs2 -d >>> >>> On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0 ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device name specified was not found while reading uuid There is no /dev/dm-2 mounted. On 10/19/2011 00:27, Sunil Mushran wrote: > mount -t debugfs debugfs /sys/kernel/debug > > Then list that dir. > > Also, do: > ocfs2_hb_ctl -l -d /dev/dm-2 > > Be careful before killing. We want to be sure that dev is not > mounted. > > On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: >> Again the outputs: >> cat >> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >> dm-2 >> --->here should be volgr1-lvol0 i guess? >> >> ls -lR /sys/kernel/debug/ocfs2 >> ls: /sys/kernel/debug/ocfs2: No such file or directory >> >> ls -lR /sys/kernel/debug/o2dlm >> ls: /sys/kernel/debug/o2dlm: No such file or directory >> >> I think i have to enable debug first somehow..? >> >> Laurentiu. >> >> On 10/19/2011 00:17, Sunil Mushran wrote: >>> What does this return? >>> cat >>> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >>> >>> Also, do: >>> ls -lR /sys/kernel/debug/ocfs2 >>> ls -lR /sys/kernel/debug/o2dlm >>> >>> On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: Here is the output: ls -lR /sys/kernel/config/cluster /sys/kernel/config/cluster: total 0 drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER /sys/kernel/config/cluster/CLUSTER: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms drwxr-xr-x 4 root root0 Oct 11 20:23 node -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms /sys/kernel/config/cluster/CLUSTER/heartbeat: total 0 drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev -r--r--r-- 1 root root 4096 Oct 19 00:12 pid -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block /sys/kernel/config/cluster/CLUSTER/node: total 0 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num On 10/19/2011 00:12, Sunil Mushran wrote: > ls -lR /sys/kernel/config/cluster > > What does this return? > > On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: >> Hi, >> I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, >> ocfs2console-1.6.
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
ocfs2_hb_ctl -l -u 0C4AB55FE9314FA5A9F81652FDB9B22D On 10/18/2011 02:40 PM, Laurentiu Gosu wrote: > mounted.ocfs2 -d > DeviceFS Stack UUID Label > /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D > ocfs2 > > mounted.ocfs2 -f > DeviceFS Nodes > /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 > > ro02xsrv001 = the other node in the cluster. > > By the way, there is no /dev/md-2 > ls /dev/dm-* > /dev/dm-0 /dev/dm-1 > > > On 10/19/2011 00:37, Sunil Mushran wrote: >> So it is not mounted. But we still have a hb thread because >> hb could not be stopped during umount. The reason for that >> could be the same that causes ocfs2_hb_ctl to fail. >> >> Do: >> mounted.ocfs2 -d >> >> On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: >>> ls -lR /sys/kernel/debug/ocfs2 >>> /sys/kernel/debug/ocfs2: >>> total 0 >>> >>> ls -lR /sys/kernel/debug/o2dlm >>> /sys/kernel/debug/o2dlm: >>> total 0 >>> >>> ocfs2_hb_ctl -I -d /dev/dm-2 >>> ocfs2_hb_ctl: Device name specified was not found while reading uuid >>> >>> There is no /dev/dm-2 mounted. >>> >>> >>> On 10/19/2011 00:27, Sunil Mushran wrote: mount -t debugfs debugfs /sys/kernel/debug Then list that dir. Also, do: ocfs2_hb_ctl -l -d /dev/dm-2 Be careful before killing. We want to be sure that dev is not mounted. On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: > Again the outputs: > cat > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev > dm-2 > --->here should be volgr1-lvol0 i guess? > > ls -lR /sys/kernel/debug/ocfs2 > ls: /sys/kernel/debug/ocfs2: No such file or directory > > ls -lR /sys/kernel/debug/o2dlm > ls: /sys/kernel/debug/o2dlm: No such file or directory > > I think i have to enable debug first somehow..? > > Laurentiu. > > On 10/19/2011 00:17, Sunil Mushran wrote: >> What does this return? >> cat >> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >> >> Also, do: >> ls -lR /sys/kernel/debug/ocfs2 >> ls -lR /sys/kernel/debug/o2dlm >> >> On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: >>> Here is the output: >>> >>> ls -lR /sys/kernel/config/cluster >>> /sys/kernel/config/cluster: >>> total 0 >>> drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER >>> >>> /sys/kernel/config/cluster/CLUSTER: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method >>> drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms >>> drwxr-xr-x 4 root root0 Oct 11 20:23 node >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms >>> >>> /sys/kernel/config/cluster/CLUSTER/heartbeat: >>> total 0 >>> drwxr-xr-x 2 root root0 Oct 19 00:12 >>> 918673F06F8F4ED188DDCE14F39945F6 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold >>> >>> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev >>> -r--r--r-- 1 root root 4096 Oct 19 00:12 pid >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block >>> >>> /sys/kernel/config/cluster/CLUSTER/node: >>> total 0 >>> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 >>> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 >>> >>> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >>> >>> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >>> >>> >>> >>> >>> On 10/19/2011 00:12, Sunil Mushran wrote: ls -lR /sys/kernel/config/cluster What does this return? On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: > Hi, > I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, > ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. > My problem is that all the time when i try to run /etc/init.d/o2cb > stop > it fails with this error: > Stopping O2CB cluster CLUSTER: Failed > Unable to stop cluster as heartbeat region still active > There is no
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
mounted.ocfs2 -d DeviceFS Stack UUID Label /dev/mapper/volgr1-lvol0 ocfs2 o2cb 0C4AB55FE9314FA5A9F81652FDB9B22D ocfs2 mounted.ocfs2 -f DeviceFS Nodes /dev/mapper/volgr1-lvol0 ocfs2 ro02xsrv001 ro02xsrv001 = the other node in the cluster. By the way, there is no /dev/md-2 ls /dev/dm-* /dev/dm-0 /dev/dm-1 On 10/19/2011 00:37, Sunil Mushran wrote: > So it is not mounted. But we still have a hb thread because > hb could not be stopped during umount. The reason for that > could be the same that causes ocfs2_hb_ctl to fail. > > Do: > mounted.ocfs2 -d > > On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: >> ls -lR /sys/kernel/debug/ocfs2 >> /sys/kernel/debug/ocfs2: >> total 0 >> >> ls -lR /sys/kernel/debug/o2dlm >> /sys/kernel/debug/o2dlm: >> total 0 >> >> ocfs2_hb_ctl -I -d /dev/dm-2 >> ocfs2_hb_ctl: Device name specified was not found while reading uuid >> >> There is no /dev/dm-2 mounted. >> >> >> On 10/19/2011 00:27, Sunil Mushran wrote: >>> mount -t debugfs debugfs /sys/kernel/debug >>> >>> Then list that dir. >>> >>> Also, do: >>> ocfs2_hb_ctl -l -d /dev/dm-2 >>> >>> Be careful before killing. We want to be sure that dev is not mounted. >>> >>> On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess? ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: > What does this return? > cat > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev > > Also, do: > ls -lR /sys/kernel/debug/ocfs2 > ls -lR /sys/kernel/debug/o2dlm > > On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: >> Here is the output: >> >> ls -lR /sys/kernel/config/cluster >> /sys/kernel/config/cluster: >> total 0 >> drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER >> >> /sys/kernel/config/cluster/CLUSTER: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method >> drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms >> drwxr-xr-x 4 root root0 Oct 11 20:23 node >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms >> >> /sys/kernel/config/cluster/CLUSTER/heartbeat: >> total 0 >> drwxr-xr-x 2 root root0 Oct 19 00:12 >> 918673F06F8F4ED188DDCE14F39945F6 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold >> >> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: >> >> >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev >> -r--r--r-- 1 root root 4096 Oct 19 00:12 pid >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block >> >> /sys/kernel/config/cluster/CLUSTER/node: >> total 0 >> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 >> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 >> >> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >> >> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >> >> >> >> >> On 10/19/2011 00:12, Sunil Mushran wrote: >>> ls -lR /sys/kernel/config/cluster >>> >>> What does this return? >>> >>> On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: Hi, I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. My problem is that all the time when i try to run /etc/init.d/o2cb stop it fails with this error: Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active There is no active mount point. I tried to manually stop the heartdbeat with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after finding the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/vol
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
So it is not mounted. But we still have a hb thread because hb could not be stopped during umount. The reason for that could be the same that causes ocfs2_hb_ctl to fail. Do: mounted.ocfs2 -d On 10/18/2011 02:32 PM, Laurentiu Gosu wrote: > ls -lR /sys/kernel/debug/ocfs2 > /sys/kernel/debug/ocfs2: > total 0 > > ls -lR /sys/kernel/debug/o2dlm > /sys/kernel/debug/o2dlm: > total 0 > > ocfs2_hb_ctl -I -d /dev/dm-2 > ocfs2_hb_ctl: Device name specified was not found while reading uuid > > There is no /dev/dm-2 mounted. > > > On 10/19/2011 00:27, Sunil Mushran wrote: >> mount -t debugfs debugfs /sys/kernel/debug >> >> Then list that dir. >> >> Also, do: >> ocfs2_hb_ctl -l -d /dev/dm-2 >> >> Be careful before killing. We want to be sure that dev is not mounted. >> >> On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: >>> Again the outputs: >>> cat >>> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >>> dm-2 >>> --->here should be volgr1-lvol0 i guess? >>> >>> ls -lR /sys/kernel/debug/ocfs2 >>> ls: /sys/kernel/debug/ocfs2: No such file or directory >>> >>> ls -lR /sys/kernel/debug/o2dlm >>> ls: /sys/kernel/debug/o2dlm: No such file or directory >>> >>> I think i have to enable debug first somehow..? >>> >>> Laurentiu. >>> >>> On 10/19/2011 00:17, Sunil Mushran wrote: What does this return? cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev Also, do: ls -lR /sys/kernel/debug/ocfs2 ls -lR /sys/kernel/debug/o2dlm On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: > Here is the output: > > ls -lR /sys/kernel/config/cluster > /sys/kernel/config/cluster: > total 0 > drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER > > /sys/kernel/config/cluster/CLUSTER: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method > drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat > -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms > -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms > drwxr-xr-x 4 root root0 Oct 11 20:23 node > -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms > > /sys/kernel/config/cluster/CLUSTER/heartbeat: > total 0 > drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold > > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes > -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks > -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev > -r--r--r-- 1 root root 4096 Oct 19 00:12 pid > -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block > > /sys/kernel/config/cluster/CLUSTER/node: > total 0 > drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 > drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 > > /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port > -rw-r--r-- 1 root root 4096 Oct 19 00:12 local > -rw-r--r-- 1 root root 4096 Oct 19 00:12 num > > /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port > -rw-r--r-- 1 root root 4096 Oct 19 00:12 local > -rw-r--r-- 1 root root 4096 Oct 19 00:12 num > > > > > On 10/19/2011 00:12, Sunil Mushran wrote: >> ls -lR /sys/kernel/config/cluster >> >> What does this return? >> >> On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: >>> Hi, >>> I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, >>> ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. >>> My problem is that all the time when i try to run /etc/init.d/o2cb stop >>> it fails with this error: >>> Stopping O2CB cluster CLUSTER: Failed >>> Unable to stop cluster as heartbeat region still active >>> There is no active mount point. I tried to manually stop the heartdbeat >>> with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after finding >>> the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 "). >>> But even if refs number is set to zero the "heartbeat region still >>> active" occurs. >>> How can i fix this? >>> >>> Thank you in advance. >>> Laurentiu. >>> >>> >>> ___ >>> Ocfs2-users mailing list >>> Ocfs2-users@oss.oracle.com >>> http://oss.oracle.com/mailman/listinfo/ocfs2-users >> > >>> >> > ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
ls -lR /sys/kernel/debug/ocfs2 /sys/kernel/debug/ocfs2: total 0 ls -lR /sys/kernel/debug/o2dlm /sys/kernel/debug/o2dlm: total 0 ocfs2_hb_ctl -I -d /dev/dm-2 ocfs2_hb_ctl: Device name specified was not found while reading uuid There is no /dev/dm-2 mounted. On 10/19/2011 00:27, Sunil Mushran wrote: > mount -t debugfs debugfs /sys/kernel/debug > > Then list that dir. > > Also, do: > ocfs2_hb_ctl -l -d /dev/dm-2 > > Be careful before killing. We want to be sure that dev is not mounted. > > On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: >> Again the outputs: >> cat >> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >> dm-2 >> --->here should be volgr1-lvol0 i guess? >> >> ls -lR /sys/kernel/debug/ocfs2 >> ls: /sys/kernel/debug/ocfs2: No such file or directory >> >> ls -lR /sys/kernel/debug/o2dlm >> ls: /sys/kernel/debug/o2dlm: No such file or directory >> >> I think i have to enable debug first somehow..? >> >> Laurentiu. >> >> On 10/19/2011 00:17, Sunil Mushran wrote: >>> What does this return? >>> cat >>> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >>> >>> Also, do: >>> ls -lR /sys/kernel/debug/ocfs2 >>> ls -lR /sys/kernel/debug/o2dlm >>> >>> On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: Here is the output: ls -lR /sys/kernel/config/cluster /sys/kernel/config/cluster: total 0 drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER /sys/kernel/config/cluster/CLUSTER: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms drwxr-xr-x 4 root root0 Oct 11 20:23 node -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms /sys/kernel/config/cluster/CLUSTER/heartbeat: total 0 drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev -r--r--r-- 1 root root 4096 Oct 19 00:12 pid -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block /sys/kernel/config/cluster/CLUSTER/node: total 0 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num On 10/19/2011 00:12, Sunil Mushran wrote: > ls -lR /sys/kernel/config/cluster > > What does this return? > > On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: >> Hi, >> I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, >> ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. >> My problem is that all the time when i try to run >> /etc/init.d/o2cb stop >> it fails with this error: >> Stopping O2CB cluster CLUSTER: Failed >> Unable to stop cluster as heartbeat region still active >> There is no active mount point. I tried to manually stop the >> heartdbeat >> with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after >> finding >> the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 >> "). >> But even if refs number is set to zero the "heartbeat region still >> active" occurs. >> How can i fix this? >> >> Thank you in advance. >> Laurentiu. >> >> >> ___ >> Ocfs2-users mailing list >> Ocfs2-users@oss.oracle.com >> http://oss.oracle.com/mailman/listinfo/ocfs2-users > >>> >> > ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
mount -t debugfs debugfs /sys/kernel/debug Then list that dir. Also, do: ocfs2_hb_ctl -l -d /dev/dm-2 Be careful before killing. We want to be sure that dev is not mounted. On 10/18/2011 02:23 PM, Laurentiu Gosu wrote: > Again the outputs: > cat > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev > dm-2 > --->here should be volgr1-lvol0 i guess? > > ls -lR /sys/kernel/debug/ocfs2 > ls: /sys/kernel/debug/ocfs2: No such file or directory > > ls -lR /sys/kernel/debug/o2dlm > ls: /sys/kernel/debug/o2dlm: No such file or directory > > I think i have to enable debug first somehow..? > > Laurentiu. > > On 10/19/2011 00:17, Sunil Mushran wrote: >> What does this return? >> cat >> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev >> >> Also, do: >> ls -lR /sys/kernel/debug/ocfs2 >> ls -lR /sys/kernel/debug/o2dlm >> >> On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: >>> Here is the output: >>> >>> ls -lR /sys/kernel/config/cluster >>> /sys/kernel/config/cluster: >>> total 0 >>> drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER >>> >>> /sys/kernel/config/cluster/CLUSTER: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method >>> drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms >>> drwxr-xr-x 4 root root0 Oct 11 20:23 node >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms >>> >>> /sys/kernel/config/cluster/CLUSTER/heartbeat: >>> total 0 >>> drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold >>> >>> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev >>> -r--r--r-- 1 root root 4096 Oct 19 00:12 pid >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block >>> >>> /sys/kernel/config/cluster/CLUSTER/node: >>> total 0 >>> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 >>> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 >>> >>> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >>> >>> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: >>> total 0 >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >>> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >>> >>> >>> >>> >>> On 10/19/2011 00:12, Sunil Mushran wrote: ls -lR /sys/kernel/config/cluster What does this return? On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: > Hi, > I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, > ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. > My problem is that all the time when i try to run /etc/init.d/o2cb stop > it fails with this error: > Stopping O2CB cluster CLUSTER: Failed > Unable to stop cluster as heartbeat region still active > There is no active mount point. I tried to manually stop the heartdbeat > with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after finding > the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 "). > But even if refs number is set to zero the "heartbeat region still > active" occurs. > How can i fix this? > > Thank you in advance. > Laurentiu. > > > ___ > Ocfs2-users mailing list > Ocfs2-users@oss.oracle.com > http://oss.oracle.com/mailman/listinfo/ocfs2-users >>> >> > ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
Again the outputs: cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev dm-2 --->here should be volgr1-lvol0 i guess? ls -lR /sys/kernel/debug/ocfs2 ls: /sys/kernel/debug/ocfs2: No such file or directory ls -lR /sys/kernel/debug/o2dlm ls: /sys/kernel/debug/o2dlm: No such file or directory I think i have to enable debug first somehow..? Laurentiu. On 10/19/2011 00:17, Sunil Mushran wrote: > What does this return? > cat > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev > > Also, do: > ls -lR /sys/kernel/debug/ocfs2 > ls -lR /sys/kernel/debug/o2dlm > > On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: >> Here is the output: >> >> ls -lR /sys/kernel/config/cluster >> /sys/kernel/config/cluster: >> total 0 >> drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER >> >> /sys/kernel/config/cluster/CLUSTER: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method >> drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms >> drwxr-xr-x 4 root root0 Oct 11 20:23 node >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms >> >> /sys/kernel/config/cluster/CLUSTER/heartbeat: >> total 0 >> drwxr-xr-x 2 root root0 Oct 19 00:12 >> 918673F06F8F4ED188DDCE14F39945F6 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold >> >> /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: >> >> >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev >> -r--r--r-- 1 root root 4096 Oct 19 00:12 pid >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block >> >> /sys/kernel/config/cluster/CLUSTER/node: >> total 0 >> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 >> drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 >> >> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >> >> /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: >> total 0 >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 local >> -rw-r--r-- 1 root root 4096 Oct 19 00:12 num >> >> >> >> >> On 10/19/2011 00:12, Sunil Mushran wrote: >>> ls -lR /sys/kernel/config/cluster >>> >>> What does this return? >>> >>> On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: Hi, I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. My problem is that all the time when i try to run /etc/init.d/o2cb stop it fails with this error: Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active There is no active mount point. I tried to manually stop the heartdbeat with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after finding the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 "). But even if refs number is set to zero the "heartbeat region still active" occurs. How can i fix this? Thank you in advance. Laurentiu. ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users >>> >> > ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
What does this return? cat /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6/dev Also, do: ls -lR /sys/kernel/debug/ocfs2 ls -lR /sys/kernel/debug/o2dlm On 10/18/2011 02:14 PM, Laurentiu Gosu wrote: > Here is the output: > > ls -lR /sys/kernel/config/cluster > /sys/kernel/config/cluster: > total 0 > drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER > > /sys/kernel/config/cluster/CLUSTER: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method > drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat > -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms > -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms > drwxr-xr-x 4 root root0 Oct 11 20:23 node > -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms > > /sys/kernel/config/cluster/CLUSTER/heartbeat: > total 0 > drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold > > /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes > -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks > -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev > -r--r--r-- 1 root root 4096 Oct 19 00:12 pid > -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block > > /sys/kernel/config/cluster/CLUSTER/node: > total 0 > drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 > drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 > > /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port > -rw-r--r-- 1 root root 4096 Oct 19 00:12 local > -rw-r--r-- 1 root root 4096 Oct 19 00:12 num > > /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: > total 0 > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address > -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port > -rw-r--r-- 1 root root 4096 Oct 19 00:12 local > -rw-r--r-- 1 root root 4096 Oct 19 00:12 num > > > > > On 10/19/2011 00:12, Sunil Mushran wrote: >> ls -lR /sys/kernel/config/cluster >> >> What does this return? >> >> On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: >>> Hi, >>> I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, >>> ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. >>> My problem is that all the time when i try to run /etc/init.d/o2cb stop >>> it fails with this error: >>> Stopping O2CB cluster CLUSTER: Failed >>> Unable to stop cluster as heartbeat region still active >>> There is no active mount point. I tried to manually stop the heartdbeat >>> with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after finding >>> the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 "). >>> But even if refs number is set to zero the "heartbeat region still >>> active" occurs. >>> How can i fix this? >>> >>> Thank you in advance. >>> Laurentiu. >>> >>> >>> ___ >>> Ocfs2-users mailing list >>> Ocfs2-users@oss.oracle.com >>> http://oss.oracle.com/mailman/listinfo/ocfs2-users >> > ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
Here is the output: ls -lR /sys/kernel/config/cluster /sys/kernel/config/cluster: total 0 drwxr-xr-x 4 root root 0 Oct 19 00:12 CLUSTER /sys/kernel/config/cluster/CLUSTER: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 fence_method drwxr-xr-x 3 root root0 Oct 19 00:12 heartbeat -rw-r--r-- 1 root root 4096 Oct 19 00:12 idle_timeout_ms -rw-r--r-- 1 root root 4096 Oct 19 00:12 keepalive_delay_ms drwxr-xr-x 4 root root0 Oct 11 20:23 node -rw-r--r-- 1 root root 4096 Oct 19 00:12 reconnect_delay_ms /sys/kernel/config/cluster/CLUSTER/heartbeat: total 0 drwxr-xr-x 2 root root0 Oct 19 00:12 918673F06F8F4ED188DDCE14F39945F6 -rw-r--r-- 1 root root 4096 Oct 19 00:12 dead_threshold /sys/kernel/config/cluster/CLUSTER/heartbeat/918673F06F8F4ED188DDCE14F39945F6: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 block_bytes -rw-r--r-- 1 root root 4096 Oct 19 00:12 blocks -rw-r--r-- 1 root root 4096 Oct 19 00:12 dev -r--r--r-- 1 root root 4096 Oct 19 00:12 pid -rw-r--r-- 1 root root 4096 Oct 19 00:12 start_block /sys/kernel/config/cluster/CLUSTER/node: total 0 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv001 drwxr-xr-x 2 root root 0 Oct 19 00:12 ro02xsrv002 /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv001: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num /sys/kernel/config/cluster/CLUSTER/node/ro02xsrv002: total 0 -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_address -rw-r--r-- 1 root root 4096 Oct 19 00:12 ipv4_port -rw-r--r-- 1 root root 4096 Oct 19 00:12 local -rw-r--r-- 1 root root 4096 Oct 19 00:12 num On 10/19/2011 00:12, Sunil Mushran wrote: > ls -lR /sys/kernel/config/cluster > > What does this return? > > On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: >> Hi, >> I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, >> ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. >> My problem is that all the time when i try to run /etc/init.d/o2cb stop >> it fails with this error: >> Stopping O2CB cluster CLUSTER: Failed >> Unable to stop cluster as heartbeat region still active >> There is no active mount point. I tried to manually stop the heartdbeat >> with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after finding >> the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 "). >> But even if refs number is set to zero the "heartbeat region still >> active" occurs. >> How can i fix this? >> >> Thank you in advance. >> Laurentiu. >> >> >> ___ >> Ocfs2-users mailing list >> Ocfs2-users@oss.oracle.com >> http://oss.oracle.com/mailman/listinfo/ocfs2-users > ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users
Re: [Ocfs2-users] Unable to stop cluster as heartbeat region still active
ls -lR /sys/kernel/config/cluster What does this return? On 10/18/2011 02:05 PM, Laurentiu Gosu wrote: > Hi, > I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, > ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. > My problem is that all the time when i try to run /etc/init.d/o2cb stop > it fails with this error: > Stopping O2CB cluster CLUSTER: Failed > Unable to stop cluster as heartbeat region still active > There is no active mount point. I tried to manually stop the heartdbeat > with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after finding > the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 "). > But even if refs number is set to zero the "heartbeat region still > active" occurs. > How can i fix this? > > Thank you in advance. > Laurentiu. > > > ___ > Ocfs2-users mailing list > Ocfs2-users@oss.oracle.com > http://oss.oracle.com/mailman/listinfo/ocfs2-users ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users
[Ocfs2-users] Unable to stop cluster as heartbeat region still active
Hi, I have a 2 nodes ocfs2 cluster running UEK 2.6.32-100.0.19.el5, ocfs2console-1.6.3-2.el5, ocfs2-tools-1.6.3-2.el5. My problem is that all the time when i try to run /etc/init.d/o2cb stop it fails with this error: Stopping O2CB cluster CLUSTER: Failed Unable to stop cluster as heartbeat region still active There is no active mount point. I tried to manually stop the heartdbeat with "ocfs2_hb_ctl -K -d /dev/mapper/volgr1-lvol0 ocfs2" (after finding the refs number with "ocfs2_hb_ctl -I -d /dev/mapper/volgr1-lvol0 "). But even if refs number is set to zero the "heartbeat region still active" occurs. How can i fix this? Thank you in advance. Laurentiu. ___ Ocfs2-users mailing list Ocfs2-users@oss.oracle.com http://oss.oracle.com/mailman/listinfo/ocfs2-users