Working with an m4a File with Goldwave

[Dan Kerstetter]

I'm not sure if this is off topic or not; so my apology if it is.\

 

I'm trying to work with a m4a file and can't save it.  I receive the
following error message when trying to do so:

 

Error

 

[Main Instruction]

No encoder or decoder is available for the audio format or an error occurred
during conversion.

 

 

How can I find the proper encoder and decoder to work with this particular
file?

 

Thanks in advance.

 

Dan

 

RE: searching for car stereo to interface with my iphone via bluetooth or car play

[Dan Kerstetter]

You might try looking at some of the Kenwood models.  My brother just got one 
which I know has Bluetooth integration, but I'm not sure about car play.

HTH

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Jim Ruby
Sent: Saturday, March 26, 2016 12:15 AM
To: 'PC Audio Discussion List' 
Subject: searching for car stereo to interface with my iphone via bluetooth or 
car play

Hi, any one have suggestions on a good car stereo to connect to my iphone 5s? 
would like it to be as feature rich as possible and accessible. Right now I 
have a kenwood kdc-bt742u and all I can do is receive phone calls and I would 
like to do all the iphone can do streaming etc.

Thanks for your thoughts..

RE: Seeking Speaker Recommendation

[Dan Kerstetter]

It's not a problem.

I purchased another set of Klipsche Pro Media 2.1 speakers and I'm happy
with them.  (smile)

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Smiling?
Sent: Wednesday, February 17, 2016 3:33 PM
To: 'PC Audio Discussion List' <pc-audio@pc-audio.org>
Subject: RE: Seeking Speaker Recommendation

Surprised at just how much attention or lack there of, that this individual
question did not receive any of.

I would go to Amazon and just take a look at the various models searching
specifically for 2.1 models seeing that this is what you are looking for.
None of us know what you are attracted to so on and so forth. A budget of
$200 isn't bad, but I am sure that you'd prefer keeping that lower if
possible. You aren't going to get anything audiophile for 2 bills but still,
it's best that you take the time and go online looking to see what is not
only available, but again, what attracts you between what's actually
available.

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dan
Kerstetter
Sent: Saturday, February 13, 2016 3:28 PM
To: PC Audio Discussion List
Subject: Seeking Speaker Recommendation

I'm just curious as to whether or not anyone on the list can recommend a
good set of computer speakers--preferably a 2.1 system as I don't have lots
of room-for under $200 U.S.?

 

Thanks in advance.

 

Dan

 

Seeking Speaker Recommendation

[Dan Kerstetter]

I'm just curious as to whether or not anyone on the list can recommend a
good set of computer speakers--preferably a 2.1 system as I don't have lots
of room-for under $200 U.S.?

 

Thanks in advance.

 

Dan

 

Finding Shoutcast Plugin

[Dan Kerstetter]

Where can I obtain a useable version of the Shoutcast plugin?  I've tried
searching on Google and can't seem to locate a working download site.

 

Thanks in advance.

 

Dan

 

Audiostocker plugin for Winamp

[Dan Kerstetter]

I've tried a google search for the subject plugin with no success.

 

Is there still a way to get it?

 

Thanks.

 

Dan

 

RE: question about Internet Broadcasting

[Dan Kerstetter]

I've gotten it installed.  Unfortunately, I had to make do with an older 
version of the SQR crossfader plugin.  I have it working minimally, but, for 
some reason, I'm unable to configure any of winamp's plugins.  I'll need to do 
some more work.



-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Byron 
Stephens
Sent: Wednesday, September 02, 2015 11:45 PM
To: PC Audio Discussion List <pc-audio@pc-audio.org>
Subject: Re: question about Internet Broadcasting

That's strange winamp wouldn't install on your win ten machine, when others 
have done it and it's running.
- Original Message -
From: "Dan Kerstetter" <dh...@comcast.net>
To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org>
Sent: Wednesday, September 02, 2015 8:07 PM
Subject: RE: question about Internet Broadcasting


So you're telling I have to spend a few hundred dollars just to get into 
internet broadcasting?  Interesting.


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Peter 
Scanlon
Sent: Wednesday, September 02, 2015 6:23 PM
To: PC Audio Discussion List <pc-audio@pc-audio.org>
Subject: Re: question about Internet Broadcasting

SPL is well worth the extra money.


From: Byron Stephens
Sent: Thursday, September 03, 2015 3:40 AM
To: PC Audio Discussion List
Subject: Re: question about Internet Broadcasting

Winamp with the encoders is a free salution that works, and if you have two 
soundcards the sqr crossfader. The second card is a screenreader only card, 
and the rest default to your primary device.
- Original Message -
From: "Dan Kerstetter" <dh...@comcast.net>
To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org>
Sent: Wednesday, September 02, 2015 10:37 AM
Subject: RE: question about Internet Broadcasting


Perhaps I should be more specific.  I'm looking for something a little less 
expensive than SPL.  That's the first place I went to when I decided to 
undertake this.

Thanks again.

Dan

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Danny 
Miles
Sent: Wednesday, September 02, 2015 6:30 AM
To: PC Audio Discussion List <pc-audio@pc-audio.org>
Subject: Re: question about Internet Broadcasting

Hi. I'm currently broadcasting on internet rightadio and I, along with the 
high majority of visually impaired presenters, use the Station Playlist 
Studio software which can be seen at  www.stationplaylist.com

The  company is very closely-linbed with designers of additional scripts for 
Jaws, NVDA and other screenreaders which ensures strong accessibility and, 
as with Byron's suggestion, the software can be used in conjunction with the 
Sam encoders for getting broadcasts onto the internet.  I'd be glad to 
advise you on anything that I can, either in relation to the software or how 
to pr epare and present a show. I'm away from home today but should be 
around for the rest of the week and I'd be happy to chat via email, Skype, 
phone or any other option that works for you.  You can email me on 
toptunesda...@gmail.com  or call me on  07926972762.  If you'd prefer me to 
call you, just let me know a suitable time and number for me to get in 
touch.
All my best, Danny

On Wednesday, 2 September 2015, Byron Stephens <bstephens122...@shaw.ca>
wrote:

> I still use winamp with the sqr crossfader and the sam encoders, as I
> have since 2005.
> - Original Message - From: "Dan Kerstetter"
> <dh...@comcast.net>
> To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
> Sent: Tuesday, September 01, 2015 10:19 PM
> Subject: question about Internet Broadcasting
>
>
> I'd like to get into internet broadcasting.
>>
>>
>>
>> What software are people using and how accessible is it?
>>
>>
>>
>> Thanks in advance.
>>
>>
>>
>> Dan
>>
>>
>>
>>
>>
>> -
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2015.0.6125 / Virus Database: 4409/10558 - Release Date:
>> 09/01/15
>>
>>
>
>

-- 

Danny Miles
Radio presenter, interviewer, researcher, podcaster and media 
consultant/trainer
Mobile: +44(0)7926 972762
Email:
toptunesda...@gmail.com
Twitter:
http://www.Twitter.com/TopTunesDanny
Facebook:
http://www.Facebook.com/AbilityGateway
LinkedIn:
http://www.LinkedIn.com/in/Milaser
Audioboo:
http://www.Audioboo.fm/TopTunesDanny
Skype: TopTunesDanny




-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6125 / Virus Database: 4409/10562 - Release Date: 09/02/15






-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6125 / Virus Database: 4409/10565 - Release Date: 09/03/15

RE: question about Internet Broadcasting

[Dan Kerstetter]

I used winamp with that particular plugin for years; however, yesterday when I 
tried getting winamp to install on my Windows 10 machine, it wouldn't do so.  
Also, after having been on the winamp site, I discovered there are no plugins 
there anymore.  I'm guessing this is because the program is no longer being 
developed.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Byron 
Stephens
Sent: Wednesday, September 02, 2015 1:40 PM
To: PC Audio Discussion List <pc-audio@pc-audio.org>
Subject: Re: question about Internet Broadcasting

Winamp with the encoders is a free salution that works, and if you have two 
soundcards the sqr crossfader. The second card is a screenreader only card, and 
the rest default to your primary device.
- Original Message -
From: "Dan Kerstetter" <dh...@comcast.net>
To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org>
Sent: Wednesday, September 02, 2015 10:37 AM
Subject: RE: question about Internet Broadcasting


Perhaps I should be more specific.  I'm looking for something a little less 
expensive than SPL.  That's the first place I went to when I decided to 
undertake this.

Thanks again.

Dan

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Danny Miles
Sent: Wednesday, September 02, 2015 6:30 AM
To: PC Audio Discussion List <pc-audio@pc-audio.org>
Subject: Re: question about Internet Broadcasting

Hi. I'm currently broadcasting on internet rightadio and I, along with the high 
majority of visually impaired presenters, use the Station Playlist Studio 
software which can be seen at  www.stationplaylist.com

The  company is very closely-linbed with designers of additional scripts for 
Jaws, NVDA and other screenreaders which ensures strong accessibility and, as 
with Byron's suggestion, the software can be used in conjunction with the Sam 
encoders for getting broadcasts onto the internet.  I'd be glad to advise you 
on anything that I can, either in relation to the software or how to pr epare 
and present a show. I'm away from home today but should be around for the rest 
of the week and I'd be happy to chat via email, Skype, phone or any other 
option that works for you.  You can email me on toptunesda...@gmail.com  or 
call me on  07926972762.  If you'd prefer me to call you, just let me know a 
suitable time and number for me to get in touch.
All my best, Danny

On Wednesday, 2 September 2015, Byron Stephens <bstephens122...@shaw.ca>
wrote:

> I still use winamp with the sqr crossfader and the sam encoders, as I 
> have since 2005.
> - Original Message - From: "Dan Kerstetter"
> <dh...@comcast.net>
> To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
> Sent: Tuesday, September 01, 2015 10:19 PM
> Subject: question about Internet Broadcasting
>
>
> I'd like to get into internet broadcasting.
>>
>>
>>
>> What software are people using and how accessible is it?
>>
>>
>>
>> Thanks in advance.
>>
>>
>>
>> Dan
>>
>>
>>
>>
>>
>> -
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2015.0.6125 / Virus Database: 4409/10558 - Release Date:
>> 09/01/15
>>
>>
>
>

-- 

Danny Miles
Radio presenter, interviewer, researcher, podcaster and media consultant/trainer
Mobile: +44(0)7926 972762
Email:
toptunesda...@gmail.com
Twitter:
http://www.Twitter.com/TopTunesDanny
Facebook:
http://www.Facebook.com/AbilityGateway
LinkedIn:
http://www.LinkedIn.com/in/Milaser
Audioboo:
http://www.Audioboo.fm/TopTunesDanny
Skype: TopTunesDanny




-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6125 / Virus Database: 4409/10562 - Release Date: 09/02/15

RE: question about Internet Broadcasting

[Dan Kerstetter]

Perhaps I should be more specific.  I'm looking for something a little less 
expensive than SPL.  That's the first place I went to when I decided to 
undertake this.

Thanks again.

Dan

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Danny Miles
Sent: Wednesday, September 02, 2015 6:30 AM
To: PC Audio Discussion List <pc-audio@pc-audio.org>
Subject: Re: question about Internet Broadcasting

Hi. I'm currently broadcasting on internet rightadio and I, along with the high 
majority of visually impaired presenters, use the Station Playlist Studio 
software which can be seen at  www.stationplaylist.com

The  company is very closely-linbed with designers of additional scripts for 
Jaws, NVDA and other screenreaders which ensures strong accessibility and, as 
with Byron's suggestion, the software can be used in conjunction with the Sam 
encoders for getting broadcasts onto the internet.  I'd be glad to advise you 
on anything that I can, either in relation to the software or how to pr epare 
and present a show. I'm away from home today but should be around for the rest 
of the week and I'd be happy to chat via email, Skype, phone or any other 
option that works for you.  You can email me on toptunesda...@gmail.com  or 
call me on  07926972762.  If you'd prefer me to call you, just let me know a 
suitable time and number for me to get in touch.
All my best, Danny

On Wednesday, 2 September 2015, Byron Stephens <bstephens122...@shaw.ca>
wrote:

> I still use winamp with the sqr crossfader and the sam encoders, as I 
> have since 2005.
> - Original Message - From: "Dan Kerstetter" 
> <dh...@comcast.net>
> To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
> Sent: Tuesday, September 01, 2015 10:19 PM
> Subject: question about Internet Broadcasting
>
>
> I'd like to get into internet broadcasting.
>>
>>
>>
>> What software are people using and how accessible is it?
>>
>>
>>
>> Thanks in advance.
>>
>>
>>
>> Dan
>>
>>
>>
>>
>>
>> -
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2015.0.6125 / Virus Database: 4409/10558 - Release Date: 
>> 09/01/15
>>
>>
>
>

-- 

Danny Miles
Radio presenter, interviewer, researcher, podcaster and media consultant/trainer
Mobile: +44(0)7926 972762
Email:
toptunesda...@gmail.com
Twitter:
http://www.Twitter.com/TopTunesDanny
Facebook:
http://www.Facebook.com/AbilityGateway
LinkedIn:
http://www.LinkedIn.com/in/Milaser
Audioboo:
http://www.Audioboo.fm/TopTunesDanny
Skype: TopTunesDanny

RE: question about Internet Broadcasting

[Dan Kerstetter]

So you're telling I have to spend a few hundred dollars just to get into 
internet broadcasting?  Interesting.


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Peter Scanlon
Sent: Wednesday, September 02, 2015 6:23 PM
To: PC Audio Discussion List <pc-audio@pc-audio.org>
Subject: Re: question about Internet Broadcasting

SPL is well worth the extra money.


From: Byron Stephens
Sent: Thursday, September 03, 2015 3:40 AM
To: PC Audio Discussion List
Subject: Re: question about Internet Broadcasting

Winamp with the encoders is a free salution that works, and if you have two 
soundcards the sqr crossfader. The second card is a screenreader only card, and 
the rest default to your primary device.
- Original Message -
From: "Dan Kerstetter" <dh...@comcast.net>
To: "'PC Audio Discussion List'" <pc-audio@pc-audio.org>
Sent: Wednesday, September 02, 2015 10:37 AM
Subject: RE: question about Internet Broadcasting


Perhaps I should be more specific.  I'm looking for something a little less 
expensive than SPL.  That's the first place I went to when I decided to 
undertake this.

Thanks again.

Dan

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Danny Miles
Sent: Wednesday, September 02, 2015 6:30 AM
To: PC Audio Discussion List <pc-audio@pc-audio.org>
Subject: Re: question about Internet Broadcasting

Hi. I'm currently broadcasting on internet rightadio and I, along with the high 
majority of visually impaired presenters, use the Station Playlist Studio 
software which can be seen at  www.stationplaylist.com

The  company is very closely-linbed with designers of additional scripts for 
Jaws, NVDA and other screenreaders which ensures strong accessibility and, as 
with Byron's suggestion, the software can be used in conjunction with the Sam 
encoders for getting broadcasts onto the internet.  I'd be glad to advise you 
on anything that I can, either in relation to the software or how to pr epare 
and present a show. I'm away from home today but should be around for the rest 
of the week and I'd be happy to chat via email, Skype, phone or any other 
option that works for you.  You can email me on toptunesda...@gmail.com  or 
call me on  07926972762.  If you'd prefer me to call you, just let me know a 
suitable time and number for me to get in touch.
All my best, Danny

On Wednesday, 2 September 2015, Byron Stephens <bstephens122...@shaw.ca>
wrote:

> I still use winamp with the sqr crossfader and the sam encoders, as I 
> have since 2005.
> - Original Message - From: "Dan Kerstetter"
> <dh...@comcast.net>
> To: "PC Audio Discussion List" <pc-audio@pc-audio.org>
> Sent: Tuesday, September 01, 2015 10:19 PM
> Subject: question about Internet Broadcasting
>
>
> I'd like to get into internet broadcasting.
>>
>>
>>
>> What software are people using and how accessible is it?
>>
>>
>>
>> Thanks in advance.
>>
>>
>>
>> Dan
>>
>>
>>
>>
>>
>> -
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2015.0.6125 / Virus Database: 4409/10558 - Release Date:
>> 09/01/15
>>
>>
>
>

-- 

Danny Miles
Radio presenter, interviewer, researcher, podcaster and media consultant/trainer
Mobile: +44(0)7926 972762
Email:
toptunesda...@gmail.com
Twitter:
http://www.Twitter.com/TopTunesDanny
Facebook:
http://www.Facebook.com/AbilityGateway
LinkedIn:
http://www.LinkedIn.com/in/Milaser
Audioboo:
http://www.Audioboo.fm/TopTunesDanny
Skype: TopTunesDanny




-
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.6125 / Virus Database: 4409/10562 - Release Date: 09/02/15

question about Internet Broadcasting

[Dan Kerstetter]

I'd like to get into internet broadcasting.

 

What software are people using and how accessible is it?

 

Thanks in advance.

 

Dan

 

RE: Latest GoldWave and Accompanying Jaws Scripts

[Dan Kerstetter]

Hi Joseph.

Am I missing something here?  The only material on the page you sent us is for 
NVDA.

Thanks again.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Joseph Lee
Sent: Friday, July 17, 2015 12:57 AM
To: 'PC Audio Discussion List'
Subject: RE: Latest GoldWave and Accompanying Jaws Scripts

Hi,
Here it is:
http://www.nvda-kr.org/ goldwave 5-6  jaws scripts 2_0.zip Hope you won't see 
the foreign text this time.
Cheers,
Joseph

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Roger R. 
Cusson
Sent: Thursday, July 16, 2015 9:46 PM
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Subject: RE: Latest GoldWave and Accompanying Jaws Scripts



What is the direct link to obtain the jfw latest gold wave scripts from?




Roger R. Cusson
Computer Access Specialist
Seeing Hands Enterprises - Lisbon, Maine
Website: http://www.rogercusson.com
TEL: (207) 353-5007
Skype Contact: rcusson
 
A quote to live by:
Any program that works perfectly, simply hasn't been tested properly!
 
 
 

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of John Chilelli
Sent: Friday, July 17, 2015 12:35 AM
To: 'PC Audio Discussion List'
Subject: RE: Latest GoldWave and Accompanying Jaws Scripts

Hi Joseph,

Please be so kind as to also send me a copy of the latest GoldWave for Jaws 
scripts.

Thank you,

John Chilelli

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Joseph Lee
Sent: Thursday, July 16, 2015 1:26 PM
To: 'PC Audio Discussion List'
Subject: RE: Latest GoldWave and Accompanying Jaws Scripts

Hi,
Please let me know if you want me to send the scripts to you directly (unless 
others have a copy of it). The latest version of GoldWave is 6.13.
Cheers,
Joseph

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Danny Miles
Sent: Thursday, July 16, 2015 4:32 AM
To: PC Audio Discussion List pc-audio@pc-audio.org
Subject: Latest GoldWave and Accompanying Jaws Scripts

Hi.  Can anyone please advise me what the latest version of GoldWave is and the 
creator of the best Jaws scripts to use with it?  If you have direct links for 
one or both, even better.

Many thanks, Danny

-- 

Danny Miles
Radio presenter, interviewer, researcher, podcaster and media consultant/trainer
Mobile: +44(0)7926 972762
Email:
toptunesda...@gmail.com
Twitter:
http://www.Twitter.com/TopTunesDanny
Facebook:
http://www.Facebook.com/AbilityGateway
LinkedIn:
http://www.LinkedIn.com/in/Milaser
Audioboo:
http://www.Audioboo.fm/TopTunesDanny
Skype: TopTunesDanny

Regarding Muy Last Post about VLC

[Dan Kerstetter]

Hello all.

 

Please disregard my previous post about VLC player.  I had a slight brain
hiccup and forgot about the default program settings in the windows 7
control panel.

 

Dan

 

Making VLC the Default Player

[Dan Kerstetter]

I'm trying to ween myself off Winamp and use VLC instead.  I've searched
through all of VLC's menus and settings and am unable to find a way to make
it my default player.  Is it possible to do this?

 

Thanks in advance.

 

Dan

 

sound Card question

[Dan Kerstetter]

Since many of the cards I see are at least for a 5.1 system, can I still use
a 2.1 speaker system on any of these cards?

 

Thanks in advance.

 

Dan

 

Changing Default File Location in CdEx

[Dan Kerstetter]

I'm using CdEx 1.74 on a windows 7 64 bit machine.

 

I've looked at the settings and am not able to change the location of the
ripped files.  They go into the music directory, but I want to put them in
one of its subdirectories called albums.  Is there a way to do this?

 

Thanks.

 

Dan

 

RE: Help with Creative audigy please

[Dan Kerstetter]

I'm curious.  Are you using the creative drivers or generic windows drivers?  I 
ask because I have an older Audigy 2 ZS and windows drivers wouldn't work for 
it.  I had to use creative's drivers and had some issues at first.  I finally 
have gotten it to work well.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Quinten 
Pendle
Sent: Monday, November 10, 2014 1:36 AM
To: 'PC Audio Discussion List'
Subject: Help with Creative audigy please

Hi all

I recently upgraded to Win7 on a machine with 8 gig ram and so on. I then 
bought a Creative Audigy sound card, since my old Soundblaster Live had it's 
chips.

For some obscure reason though, this audigy soundcard stutters like mad 
sometimes, without warning, and apparently without reason.
This happens regardless of any audio I run through it, music, jaws, ... 
everything.
I updated the drivers for the stupid piece of crap, I uninstalled it, 
reinstalled it, tried to free up some resources, but to no avail.

I think I'm at the point where I wanna smash the thing into a zillion pieces.

Is there any solution for this?

I'd appreciate any help in this regard.

Thanks in advance.

All the best

Quinten Pendle

Getting Audigy ZS 2 soundcard to work

[Dan Kerstetter]

Is it possible to use an SB Audigy ZS 2 soundcard in a windows 7 64 bit
machine?

 

When I had the card installed and booted up the computer, I got an error
message saying that windows was unable to install device drivers for the
device.  I then went to the creative support site and downloaded a driver
package which I installed; however, when I rebooted after the installation I
received a message saying that the drivers could not be loaded for the
soundcard.

 

According to the Creative web site the software I downloaded was supposed to
work on Windows 7 64 bit.

 

I've since uninstalled the drivers and now when I try reinstalling them I
receive an error message stating that I have previously installed drivers
for this device and to reboot and try again; but, of course, it doesn't
work.

 

I would appreciate any suggestions or answers anyone might have.

 

Thanks.

 

Dan

 

RE: Follow-up: Free CD Ripping Software

[Dan Kerstetter]

Thanks Dane.

It was me who asked the question a while back.  I've since found a solution, 
but I'll keep windows media player in mind.  I haven't tried the latest version.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dane 
Trethowan
Sent: Friday, October 31, 2014 11:43 AM
To: PC Audio Discussion List
Subject: Follow-up: Free CD Ripping Software

Hi!

Someone on list asked about free CD Ripping Software a little while ago, I 
answered with iTunes though of course I didn’t realise at the time that there’s 
probably an even better answer built right into Windows itself which I assume 
the questioner was using.

The answer of course is Windows Media Player which - when I last tried it - was 
very accessible indeed.

I didn’t follow the conversation at the time so perhaps someone else on list 
suggested Windows Media Player anyway.

**

Dane Trethowan
grtd...@internode.on.net
Skype: grtdane12
Phone US (213) 438-9741
Phone U.K. 01245 79 0598
Phone Australia (03) 9005 8589
Mobile: +61400494862
faceTime +61400494862
Fax +61397437954
Twitter: @grtdane

Inexpensive Microphone for chatting

[Dan Kerstetter]

Hello all.

 

I use a desktop computer and prefer not to use a headset all the time.  Is
there a microphone, USB or otherwise, I can use for voice
chatting-preferably with noise canceling-that's not too costly?

 

Thanks.

 

Dan

 

RE: Free CD Ripping Program

[Dan Kerstetter]

Personally I like iTunes; however, I'm making this inquiry on behalf of a
friend who wants to rip CD's but not have them go into the iTunes library.

As for exact audio copy, I like it but have never been able to configure the
file naming properly.

Thanks for the input.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dane
Trethowan
Sent: Friday, October 03, 2014 10:22 PM
To: PC Audio Discussion List
Subject: Re: Free CD Ripping Program

Stupid question I'm sure but have you tried iTunes?

If you're looking for the best CD Ripper on the Planet then you can always
try Exact Audio Copy, haven't used it in a while though as I usually use my
Mac for that sort of thing these days or I use Easy CD Audio Converter I
think its called these days, I bought a lifetime licence for the product but
I think there's a free version of that available? Someone might correct me
on that please.
On 4/10/2014 11:47 AM, Dan Kerstetter wrote:
 I'm looking for a program for CD ripping.  I have the latest versions 
 of Express rip and CdEx and am not happy with the way either one works.

   

 I would appreciate any suggestions.

   

 Thanks.

   

 Dan

   

RE: Free CD Ripping Program

[Dan Kerstetter]

Hello Alexandra.

I'll look for the older version.  The newest one has problems accessing any
data base.  I'm very surprised at this.  I've always used it in the past and
installed this new version on my recently acquired Windows 7 machine.

Thanks.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Alexandra
Grünauer
Sent: Saturday, October 04, 2014 4:05 AM
To: 'PC Audio Discussion List'
Subject: RE: Free CD Ripping Program

Hi Dan,

Could you say why you're not happy with CDEx? I don't think that there's a
problem that couldn't be solved with CDEx. I'd recommend you use the 1.70
Beta 2 though because that doesn't have any flaws compared to the later
versions of CDEx.

Take care
Alexandra
-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dan
Kerstetter
Sent: Saturday, October 04, 2014 3:47 AM
To: PC Audio Discussion List
Subject: Free CD Ripping Program

I'm looking for a program for CD ripping.  I have the latest versions of
Express rip and CdEx and am not happy with the way either one works.

 

I would appreciate any suggestions.

 

Thanks.

 

Dan

 

RE: Free CD Ripping Program

[Dan Kerstetter]

I've changed a few settings in the latest version of CdEx and it's now
working as it should.

Thanks.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Daniel
Sousa Peaulo Casimiro
Sent: Saturday, October 04, 2014 2:45 PM
To: PC Audio Discussion List
Subject: RE: Free CD Ripping Program

I have ITunes 11.4. It's very easy and accessible.

You insert a CD with ITunes opened, than you choice Yes or No.


Fore more infos contact me. My skype is daniel.sousa.paulo.casimiro

 From: dh...@comcast.net
 To: pc-audio@pc-audio.org
 Subject: RE: Free CD Ripping Program
 Date: Sat, 4 Oct 2014 11:58:48 -0400
 
 Hello Alexandra.
 
 I'll look for the older version.  The newest one has problems 
 accessing any data base.  I'm very surprised at this.  I've always 
 used it in the past and installed this new version on my recently acquired
Windows 7 machine.
 
 Thanks.
 
 Dan
 
 
 -Original Message-
 From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of 
 Alexandra Grünauer
 Sent: Saturday, October 04, 2014 4:05 AM
 To: 'PC Audio Discussion List'
 Subject: RE: Free CD Ripping Program
 
 Hi Dan,
 
 Could you say why you're not happy with CDEx? I don't think that 
 there's a problem that couldn't be solved with CDEx. I'd recommend you 
 use the 1.70 Beta 2 though because that doesn't have any flaws 
 compared to the later versions of CDEx.
 
 Take care
 Alexandra
 -Original Message-
 From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dan 
 Kerstetter
 Sent: Saturday, October 04, 2014 3:47 AM
 To: PC Audio Discussion List
 Subject: Free CD Ripping Program
 
 I'm looking for a program for CD ripping.  I have the latest versions 
 of Express rip and CdEx and am not happy with the way either one works.
 
  
 
 I would appreciate any suggestions.
 
  
 
 Thanks.
 
  
 
 Dan
 
  
 
 
 
 
  

Free CD Ripping Program

[Dan Kerstetter]

I'm looking for a program for CD ripping.  I have the latest versions of
Express rip and CdEx and am not happy with the way either one works.

 

I would appreciate any suggestions.

 

Thanks.

 

Dan

 

RE: CdEx Data Base Question

[Dan Kerstetter]

I've been using this program for years and have never encountered this
before.  Perhaps I'll try it without pressing the next button.

Thanks for the input.

Dan



-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Alexandra
Grünauer
Sent: Thursday, September 25, 2014 2:14 AM
To: 'PC Audio Discussion List'
Subject: RE: CdEx Data Base Question

What next button do you refer to? When I insert the CD, CDEx retreaves the
data from the database FreeCDDB and I press F8 or F9 to extract the content.

This must be set correctly in the options however.

Alexandra

 -Original Message-
 From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dan
 Kerstetter
 Sent: Wednesday, September 24, 2014 10:42 PM
 To: PC Audio Discussion List
 Subject: CdEx Data Base Question
 
 I want to use CdEx.  In the settings, I've entered my email address in
order
 to access the remote freedb DATA BASE; however, when I try ripping a CD
 and get the track names and press the next button, they disappear.  Is
there
 a step I'm missing?
 
 
 
 Just curious.
 
 
 
 Dan
 
 

RE: CdEx Data Base Question

[Dan Kerstetter]

I know what  you mean.  When I used older versions of the same program on my
XP machine I never encountered this.  I've only tried this with one CD using
the latest downloaded version on a Windows 7 64 bit machine.  To say the
least, it is a bit strange.

Thanks for the input.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Alexandra
Grünauer
Sent: Thursday, September 25, 2014 4:14 PM
To: 'PC Audio Discussion List'
Subject: RE: CdEx Data Base Question

I don't even know what button you're all talking about. In my CDEx there is
no next button.

Take care
Alexandra

 -Original Message-
 From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dan 
 Kerstetter
 Sent: Thursday, September 25, 2014 5:22 PM
 To: 'PC Audio Discussion List'
 Subject: RE: CdEx Data Base Question
 
 I've been using this program for years and have never encountered this 
 before.  Perhaps I'll try it without pressing the next button.
 
 Thanks for the input.
 
 Dan
 
 
 
 -Original Message-
 From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of 
 Alexandra Grünauer
 Sent: Thursday, September 25, 2014 2:14 AM
 To: 'PC Audio Discussion List'
 Subject: RE: CdEx Data Base Question
 
 What next button do you refer to? When I insert the CD, CDEx 
 retreaves the data from the database FreeCDDB and I press F8 or F9 to 
 extract the content.
 
 This must be set correctly in the options however.
 
 Alexandra
 
  -Original Message-
  From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of
 Dan
  Kerstetter
  Sent: Wednesday, September 24, 2014 10:42 PM
  To: PC Audio Discussion List
  Subject: CdEx Data Base Question
 
  I want to use CdEx.  In the settings, I've entered my email address 
  in
 order
  to access the remote freedb DATA BASE; however, when I try ripping a 
  CD and get the track names and press the next button, they disappear.
  Is
 there
  a step I'm missing?
 
 
 
  Just curious.
 
 
 
  Dan
 
 
 
 

Express Rip Question

[Dan Kerstetter]

I'm helping a friend set up Express Rip.  I've gone through all the options
I can find and can't seem to make the ripped tracks appear in the same order
as they appear on the CD.  Is there a way to correct this?

 

Thanks in advance.

 

Dan

CdEx Data Base Question

[Dan Kerstetter]

I want to use CdEx.  In the settings, I've entered my email address in order
to access the remote freedb DATA BASE; however, when I try ripping a CD and
get the track names and press the next button, they disappear.  Is there a
step I'm missing?

 

Just curious.

 

Dan

 

RE: How Do I Tell My Computer I Want Winamp To Play The CD?

[Dan Kerstetter]

I think I'm stumped on this one.  I honestly don't know what else to do.
Have you checked the file type associations from within Winamp and settings
in express rip?  Just curious.



-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Tom
Kaufman
Sent: Monday, September 22, 2014 6:10 PM
To: 'PC Audio Discussion List'
Subject: RE: How Do I Tell My Computer I Want Winamp To Play The CD?

Okay...I tried what you said; still no soap!  When I got to ..CD (it says
not checked) so I tried to check it with space bar...nothing doing!  So I
figured I'd try it anyhow.  Good ole CD Express Rip insists on coming up
anyway!  So what have I not done?
Tom Kaufman

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dan
Kerstetter
Sent: Monday, September 22, 2014 5:18 PM
To: 'PC Audio Discussion List'
Subject: RE: How Do I Tell My Computer I Want Winamp To Play The CD?

I think perhaps I made this harder than it should be.

If you type set default into the start  menu search box the first result you
should see is set default programs.  Press enter and tab once to see a list
of your programs.  Arrow down to winamp and tab to the choose defaults
button and press enter.  Then you can tab until you see a list of file
types.  Arrow down until you find the CD and check the box.  Then tab to the
save button.

I hope this clarifies things a little.  My apologies for the previously
convoluted post.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Tom
Kaufman
Sent: Monday, September 22, 2014 4:53 PM
To: 'PC Audio Discussion List'
Subject: RE: How Do I Tell My Computer I Want Winamp To Play The CD?

Dan and list:  I'm getting screwed up somehow; I'm doing what I think you
told me to do, but get entirely different results!  I can get to the first
part set defaults...but then you are telling me to press enter...but
what I get is just a thing that says link!!  So I must be doing it wrong or
am losing something in the translation!
Tom Kaufman

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dan
Kerstetter
Sent: Monday, September 22, 2014 4:16 PM
To: 'PC Audio Discussion List'
Subject: RE: How Do I Tell My Computer I Want Winamp To Play The CD?

In the start menu search box type set default.  The first entry should be
set your default programs.  Press enter.  Then press enter on default
programs.  Tab until you hear click to open default programs.  Tab until
you hear set your default programs and press enter.  Tab once and you
should have a list of all your installed programs.  Arrow down until you
find winamp.  Tab until you hear choose defaults for this program and
press enter.  .  Tab until you have a list of file types.  Arrow down until
you find CD and check the box.  Tab to the save button and press enter or
space.

HTH

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Tom
Kaufman
Sent: Monday, September 22, 2014 3:05 PM
To: Pc-audio@pc-audio.org
Subject: How Do I Tell My Computer I Want Winamp To Play The CD?

Hello list:  I've just received a CD that I want to play; normally, Winamp
goes ahead and plays it; at least it used to be that Windows would ask me
what I wanted to do!  But now, Express rip insists on coming up.and there
seems to be _no way_ to stop it!  When it comes up, I can't just close it
out and go on; it insists on me telling it whether I want to certify that
this is an unsilenced CD.or whatever!  Am running Windows 7-64 bit; running
Jaws 15.  Any help or information will be much appreciated!

Thanks,

Tom Kaufman

RE: How Do I Tell My Computer I Want Winamp To Play The CD?

[Dan Kerstetter]

In the start menu search box type set default.  The first entry should be
set your default programs.  Press enter.  Then press enter on default
programs.  Tab until you hear click to open default programs.  Tab until
you hear set your default programs and press enter.  Tab once and you
should have a list of all your installed programs.  Arrow down until you
find winamp.  Tab until you hear choose defaults for this program and
press enter.  .  Tab until you have a list of file types.  Arrow down until
you find CD and check the box.  Tab to the save button and press enter or
space.

HTH

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Tom
Kaufman
Sent: Monday, September 22, 2014 3:05 PM
To: Pc-audio@pc-audio.org
Subject: How Do I Tell My Computer I Want Winamp To Play The CD?

Hello list:  I've just received a CD that I want to play; normally, Winamp
goes ahead and plays it; at least it used to be that Windows would ask me
what I wanted to do!  But now, Express rip insists on coming up.and there
seems to be _no way_ to stop it!  When it comes up, I can't just close it
out and go on; it insists on me telling it whether I want to certify that
this is an unsilenced CD.or whatever!  Am running Windows 7-64 bit; running
Jaws 15.  Any help or information will be much appreciated!

Thanks,

Tom Kaufman

RE: How Do I Tell My Computer I Want Winamp To Play The CD?

[Dan Kerstetter]

I think perhaps I made this harder than it should be.

If you type set default into the start  menu search box the first result you
should see is set default programs.  Press enter and tab once to see a list
of your programs.  Arrow down to winamp and tab to the choose defaults
button and press enter.  Then you can tab until you see a list of file
types.  Arrow down until you find the CD and check the box.  Then tab to the
save button.

I hope this clarifies things a little.  My apologies for the previously
convoluted post.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Tom
Kaufman
Sent: Monday, September 22, 2014 4:53 PM
To: 'PC Audio Discussion List'
Subject: RE: How Do I Tell My Computer I Want Winamp To Play The CD?

Dan and list:  I'm getting screwed up somehow; I'm doing what I think you
told me to do, but get entirely different results!  I can get to the first
part set defaults...but then you are telling me to press enter...but
what I get is just a thing that says link!!  So I must be doing it wrong or
am losing something in the translation!
Tom Kaufman

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dan
Kerstetter
Sent: Monday, September 22, 2014 4:16 PM
To: 'PC Audio Discussion List'
Subject: RE: How Do I Tell My Computer I Want Winamp To Play The CD?

In the start menu search box type set default.  The first entry should be
set your default programs.  Press enter.  Then press enter on default
programs.  Tab until you hear click to open default programs.  Tab until
you hear set your default programs and press enter.  Tab once and you
should have a list of all your installed programs.  Arrow down until you
find winamp.  Tab until you hear choose defaults for this program and
press enter.  .  Tab until you have a list of file types.  Arrow down until
you find CD and check the box.  Tab to the save button and press enter or
space.

HTH

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Tom
Kaufman
Sent: Monday, September 22, 2014 3:05 PM
To: Pc-audio@pc-audio.org
Subject: How Do I Tell My Computer I Want Winamp To Play The CD?

Hello list:  I've just received a CD that I want to play; normally, Winamp
goes ahead and plays it; at least it used to be that Windows would ask me
what I wanted to do!  But now, Express rip insists on coming up.and there
seems to be _no way_ to stop it!  When it comes up, I can't just close it
out and go on; it insists on me telling it whether I want to certify that
this is an unsilenced CD.or whatever!  Am running Windows 7-64 bit; running
Jaws 15.  Any help or information will be much appreciated!

Thanks,

Tom Kaufman

RE: MP3 TO TEXT - Repost

[Dan Kerstetter]

You might try Express Scribe from NCH Software at:

http://www.nch.com.au/index.html

Its primary use is transcription.  One of the options in the options menu is
setting up speech recognition.  It will create a text draft of a file.

I haven't tried this particular option so I can't vouch for its accuracy.

HTH

Dan

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Olusegun
-- Victory Associates LTD, Inc.
Sent: Saturday, June 28, 2014 1:48 PM
To: 'PC Audio Discussion List'
Subject: MP3 TO TEXT

Hi Everyone:

Anyone knows of an MP3 to Text converter?  A reasonably accessible one will
much preferred.  Gracious thanks.

Sincerely,
Olusegun
Denver, Colorado

RE: Coppiing music from my brother's IPod?

[Dan Kerstetter]

Also, before you plug it in, make sure iTunes is set not to automatically
sync.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dave
McElroy
Sent: Tuesday, June 24, 2014 9:36 PM
To: 'PC Audio Discussion List'
Subject: RE: Coppiing music from my brother's IPod?

That's what you need to do.  When you connect the player it esentially
becomes an external drive to your computer.  Just make sure you copy rather
than move.  Moving the files would transfer them to your pc.  You want to
copy.  

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Carliss
Sent: Tuesday, June 24, 2014 6:16 PM
To: 'PC Audio Discussion List'
Subject: Coppiing music from my brother's IPod?

Listers,

Plese tell me the best way to copy my brother's music which is on his IPod,
one of THOSE THAT HAS A TOUCH SCREEN, I was thinking about just plugging the
IPod  in to my computer which has ITunes on it, and coppiing the music THAT
WAY, AND when its finished downloding in to ITunes JUST COPY AND PASTE IT
WHERE I WANT? I don't want my brother to lose any of his music. He loves it!

Thanks to all.

 

 

Carliss



---
This email is free from viruses and malware because avast! Antivirus
protection is active.
http://www.avast.com

RE: Bose Companion 2 series iii speakers best ever

[Dan Kerstetter]

I have to say I hope they're better than the companion 2.  I had a pair of
those and got rid of them asap.  It was like listening to a boom box instead
of something with full range.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Hamit
Campos
Sent: Monday, June 09, 2014 9:36 AM
To: 'PC Audio Discussion List'
Subject: RE: Bose Companion 2 series iii speakers best ever

That sounds just about right. I don't know if that price  was exact It's not
too far from what I recall US ppricing to be. I've heard them and they are
good. I just preferred the Companion 5 multimedia speakers.

-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dane
Trethowan
Sent: Monday, June 09, 2014 5:51 AM
To: PC Audio Discussion List
Subject: Fwd: Bose Companion 2 series iii speakers best ever

Hi!

This eMail is forwarded from another list I'm on, this list is an Australian
eMail list so I don't know about pricing for these Bose speakers in the U.S.
so people may wish to check.

If you're looking for a set of computer speakers at a good value for money
price then the set described here may be well worth the look given the price
they're being sold for right now.


snip

 Hi all.
 
 Just wanted to let folks know about these awesome bose companion 2 
 series
iii speakers i've just bought.
 
 There 149 dollars at the bose store or the apple store or any other 
 good
re-tailer.
 
 Basically these are computer desktop speakers consisting of 2 small
desktop speakers no sub and very easy to connect up.
 
 There are only 4 cables and a single dial on the front for turning the
speakers on and for volume.
 
 There is also a 3.5 mm headphone  jack just below the on off volume
control and on the back you have inputs for the left speaker, a c power, the
input for connecting a 3.5 mm cable then the other end of that cable
connects to a pc mac iphone whatever you wish to power.
 
 The final input is an aux input for connecting to another device.
 
 Keep in mind these are not hi-fi speakers but if your looking for
something just for a pc or mac or a laptop, you can't go past the bose
companion 2 series 3 speakres.
 
 These are the newest desktop speakers in the Bose lineup.
 
 Grab a pair today and enjoy crisp clear sound never heard from a pair 
 of
speakers this small.

snip

**

Dane Trethowan
Skype: grtdane12
Phone US (213) 438-9741
Phone U.K. 01245 79 0598
Phone Australia (03) 9005 8589
Mobile: +61400494862
faceTime +61400494862
Fax +61397437954
Twitter: @grtdane

RE: Bose Companion 2 series iii speakers best ever

[Dan Kerstetter]

I bought a set of klipsch speakers for $149 U.S.  It's a 2.1 system and, for
the price, the range is great.  I have, however, found out since I've
switched computers that you need a good sound card to drive them.

Just my two cents worth.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Steve
Jacobson
Sent: Monday, June 09, 2014 3:01 PM
To: PC Audio Discussion List
Subject: Re: Bose Companion 2 series iii speakers best ever

I'm a little confused here.  Are you saying there are full-range speakers of
the same size and price?  How does one define full-range?  In my experience,
it is very rare that one can simply choose between full-range and boombox
sound with size and price remaining constant.  I have not heard the Bose
Companion series so I don't know if I would like them or not, but there are
times when I have found a good boombox sound to be acceptable when the
speakers fit into a tight space or when they were being used by people who
might not be careful with them.  I also still use a set of thirty-year-old
Freid floor standing speakers which were considered full range and enjoy
them as well.

Best regards,

Steve Jacobson

On Tue, 10 Jun 2014 03:38:38 +1000, Dane Trethowan wrote:

I'm not at all surprised if what you said also applied to these 
speakers to be honest, let's put it this way,
there are some people who have gorwn up with a Boombox sound, and they
know nothing better, that's their thing of course, so long as they're happy
then that's what matters but there's far better audio quality out there than
Boombox audio.



Dane Trethowan's iPhone at +61400494862 has had the privlidge of delivering
the above eMail to you.


 On 10 Jun 2014, at 3:22 am, Dan Kerstetter dh...@comcast.net wrote:
 
 I have to say I hope they're better than the companion 2.  I had a 
 pair of those and got rid of them asap.  It was like listening to a 
 boom box instead of something with full range.
 
 Dan
 
 
 -Original Message-
 From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of 
 Hamit Campos
 Sent: Monday, June 09, 2014 9:36 AM
 To: 'PC Audio Discussion List'
 Subject: RE: Bose Companion 2 series iii speakers best ever
 
 That sounds just about right. I don't know if that price  was exact 
 It's not too far from what I recall US ppricing to be. I've heard 
 them and they are good. I just preferred the Companion 5 multimedia
speakers.
 
 -Original Message-
 From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of 
 Dane Trethowan
 Sent: Monday, June 09, 2014 5:51 AM
 To: PC Audio Discussion List
 Subject: Fwd: Bose Companion 2 series iii speakers best ever
 
 Hi!
 
 This eMail is forwarded from another list I'm on, this list is an 
 Australian eMail list so I don't know about pricing for these Bose
speakers in the U.S.
 so people may wish to check.
 
 If you're looking for a set of computer speakers at a good value for 
 money price then the set described here may be well worth the look 
 given the price they're being sold for right now.
 
 
 snip
 
 Hi all.
 
 Just wanted to let folks know about these awesome bose companion 2 
 series
 iii speakers i've just bought.
 
 There 149 dollars at the bose store or the apple store or any other 
 good
 re-tailer.
 
 Basically these are computer desktop speakers consisting of 2 small
 desktop speakers no sub and very easy to connect up.
 
 There are only 4 cables and a single dial on the front for turning 
 the
 speakers on and for volume.
 
 There is also a 3.5 mm headphone  jack just below the on off volume
 control and on the back you have inputs for the left speaker, a c 
 power, the input for connecting a 3.5 mm cable then the other end of 
 that cable connects to a pc mac iphone whatever you wish to power.
 
 The final input is an aux input for connecting to another device.
 
 Keep in mind these are not hi-fi speakers but if your looking for
 something just for a pc or mac or a laptop, you can't go past the 
 bose companion 2 series 3 speakres.
 
 These are the newest desktop speakers in the Bose lineup.
 
 Grab a pair today and enjoy crisp clear sound never heard from a 
 pair of
 speakers this small.
 
 snip
 
 **
 
 Dane Trethowan
 Skype: grtdane12
 Phone US (213) 438-9741
 Phone U.K. 01245 79 0598
 Phone Australia (03) 9005 8589
 Mobile: +61400494862
 faceTime +61400494862
 Fax +61397437954
 Twitter: @grtdane
 
 
 
 
 
 
 
 

RE: Concerning Rar files

[Dan Kerstetter]

Try 7 zip.  It works well and is accessible.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of John
Chilelli
Sent: Tuesday, May 20, 2014 1:55 AM
To: PC Audio Discussion List
Subject: Concerning Rar files

Hi all,

How does one open and install one on your Windows PC?

Do I need a third party program?

Thanks,

John

RE: Question about Headphones

[Dan Kerstetter]

John,

Thanks so much for the information.  I would appreciate knowing anything you
can find out.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of John
Chilelli
Sent: Tuesday, March 25, 2014 10:36 PM
To: PC Audio Discussion List
Subject: Re: Question about Headphones

Hi Dan,

At Elizabeth Pierce, Olmsted center for Sight, Buffalo, NY, telephone
opperators use a headset that does everything you want. There is a separate
volume control for each side.  But I know that they cost something like
$225.00 a pair.  When I go into work I will ask about then and where one
might get a pair.  The thing is is I am off until Saturday.  Let me know in
the meantime if he finds something that works for him.

John
On 3/25/2014 1:03 PM, Dan Kerstetter wrote:
 I'm posting this on behalf of a friend who is looking for special 
 headphones.  Perhaps someone here can help me out.  Below is her 
 question

   

 I'm looking for something that I can use part-time at my volunteer job 
 to answer the phone so they'd have to have a microphone. If it's 
 possible to have a split set so I could use one ear for the phone and 
 one ear either for my book player or the computer that would be nice 
 too, but I'd worry about volume since I hear better out of one ear 
 than the other. Is there a pair that would have separate volume controls
for each ear?

 

Question about Headphones

[Dan Kerstetter]

I'm posting this on behalf of a friend who is looking for special
headphones.  Perhaps someone here can help me out.  Below is her question

 

I'm looking for something that I can use part-time at my volunteer job to
answer the phone so they'd have to have a microphone. If it's possible to
have a split set so I could use one ear for the phone and one ear either for
my book player or the computer that would be nice too, but I'd worry about
volume since I hear better out of one ear than the other. Is there a pair
that would have separate volume controls for each ear?

   

RE: VLC

[dan Kerstetter]

I think it works better with system access than with JAWS.  It's a different
interface but it's not bad.  I don't use it often so I have to figure it out
each time I do.  I know at least some of the shortcut keys don't work.

HTH

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dean
Masters
Sent: Thursday, February 20, 2014 2:23 PM
To: PC Audio Discussion List
Subject: Re: VLC

I have tried it with JAWS and found the built in keystrokes wouldn't work
but others haven't had any problems with them with JAWS.

Dean


-Original Message-
From: Peter Russillo
Sent: Wednesday, February 19, 2014 6:04 PM
To: pc-audio@pc-audio.org
Subject: VLC

Hi list.  I'm curious as to whether the VLC media player is accessible
without the need for scripts, and how it stacks up against Windows Media
Player for playing audio files and making playlists; if anyone here uses
this software please let me know how usable it is with screen readers such
as System Access; thanks.

Peter

RE: Is the NCH audio software accessible?

[dan Kerstetter]

I believe it will work on Windows 7 64 bit.  The program itself is very
accessible.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Peter
Russillo
Sent: Wednesday, December 25, 2013 6:35 PM
To: pc-audio@pc-audio.org
Subject: Is the NCH audio software accessible?

Hi list, Merry Christmas.

Would anyone here know about the accessibility of the software from NCH?
Specifically, I want to look into their Express Burn CD burning software, if
it works on Windows 7 64 bit machines.  If anyone's had experience using
this, would you please give me some pointers for getting the best use from
it?  Windows Media Player seems a bit tricky for setting up a playlist to
burn to a CD; I use System Access for a screen reader but something's wrong
with the Media Library in that it won't let me burn something to CD; Support
can't help much in this case.  I have tried Digital Jukebox from Marvelsoft;
in that case yes, I can make the playlist and then go to the Project menu
and tell the program to burn the tracks to CD; a blank CD is in the drive,
but when I hit the okay button after I'm given the total playing time for
the tracks to burn the CD, the speech just goes silent and a message pops up
that the dj.exe has stopped working and should be closed; I haven't heard
back from their tech support yet, maybe tomorrow after Christmas. 
Meanwhile I'm wanting to find out more about Express Burn by NCH Software to
find out if it's accessible with screen readers before I plunk down money
for it.  Thanks in advance for any info you can give me on this; also if
anyone has experience with Digital Jukebox by Marvelsoft I'm interested in
learning about experiences people had using it.  thanks again and Merry
Christmas.

Peter Russillo

RE: Speaker Question/Problem

[dan Kerstetter]

I'd never heard of them until recently.  I really like them.  Now if I could
just get rid of this headphone problem.  The manual suggests using line out
instead of the standard speaker plug.  That doesn't work well on an audigy
2ZS sound card.  The manual also instructs me to raise the wave volume to 70
percent.  With this particular sound card, however, it's a bit much.  I've
also adjusted the advance controls a bit.  I'm using them in a small area
and can turn the sub down and it's still very responsive.


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dane
Trethowan
Sent: Tuesday, November 05, 2013 8:45 AM
To: PC Audio Discussion List
Subject: Re: Speaker Question/Problem

Thanks for this, I'd not heard of this brand until you'd mentioned it, they
certainly get some reasonable reviews,
http://www.productreview.com.au/c/speakers/m/klipsch.html

On 5 Nov 2013, at 10:20 am, dan Kerstetter dh...@comcast.net wrote:

 Klipsch


**

Dane Trethowan
Skype: grtdane12
Phone US (213) 438-9741
Phone U.K. 01245 79 0598
Phone Australia (03) 9005 8589
Mobile: +61400494862
Fax +61397437954



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Speaker Question/Problem

[dan Kerstetter]

I just got a wonderful set of computer speakers; however, there seems to be
a slight problem.  When I plug headphones into the speakers and really turn
it up, some of the sound bleeds through the speakers.  I've read the manual
and it specifically states that plugging in headphones will cut the speakers
off.  Any ideas or thoughts about this problem would be appreciated.

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: Speaker Question/Problem

[dan Kerstetter]

The speakers are Klipsch Media 2.1computer speakers.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Sunshine
Sent: Monday, November 04, 2013 1:01 PM
To: PC Audio Discussion List
Subject: Re: Speaker Question/Problem

what are the speakers what brand and model?
- Original Message - 
From: dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Monday, November 04, 2013 11:56 AM
Subject: Speaker Question/Problem


I just got a wonderful set of computer speakers; however, there seems to be
a slight problem.  When I plug headphones into the speakers and really turn
it up, some of the sound bleeds through the speakers.  I've read the manual
and it specifically states that plugging in headphones will cut the speakers
off.  Any ideas or thoughts about this problem would be appreciated.



Thanks.



Dan



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org




To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: Speaker Question/Problem

[dan Kerstetter]

These are actually very good.  The manual does say that plugging the
headphones in will turn off the speakers and sub.  The speakers are
connected with clips to the sub, similar to a stereo component system.  All
is properly connected.



-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Dane
Trethowan
Sent: Monday, November 04, 2013 1:07 PM
To: PC Audio Discussion List
Subject: Re: Speaker Question/Problem

Okay, well I'm glad you got a wonderful! pair of computer speakers, its very
hard indeed to get a Wonderful! pair of computer speakers these days
smile.

As far as bleeding of sound through the speakers themselves? I have heard of
this actually happening, does the manual specifically say that plugging in
the headphones will mute the sound? Believe it or not some models don't mute
the sound entirely to the speakers, the sound output to the speakers is just
reduced.

Now another question, does this speaker system actually have a line out
connection as well as your standard line in? I'm wondering if perhaps you
have the computer connected to a line out rather than a line in, this can
cause some funny things to happen.

And finally, If the plugging in of headphones is supposed to mute the
speakers and this isn't happening then it would appear to me at least that
you have a fault with your speakers.


On 5 Nov 2013, at 4:56 am, dan Kerstetter dh...@comcast.net wrote:

 I just got a wonderful set of computer speakers; however, there seems 
 to be a slight problem.  When I plug headphones into the speakers and 
 really turn it up, some of the sound bleeds through the speakers.  
 I've read the manual and it specifically states that plugging in 
 headphones will cut the speakers off.  Any ideas or thoughts about this
problem would be appreciated.
 
 
 
 Thanks.
 
 
 
 Dan
 
 
 
 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org


**

Dane Trethowan
Skype: grtdane12
Phone US (213) 438-9741
Phone U.K. 01245 79 0598
Phone Australia (03) 9005 8589
Mobile: +61400494862
Fax +61397437954



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

USB Microphone Question

[dan Kerstetter]

My apologies if this is off topic for the list.

 

Is it possible to buy just a USB microphone with noise canceling?  I don't
really need headphones, but my current microphone has no noise canceling and
is very annoying.

 

I would appreciate any input.

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: A good and free cd burning program?

[dan Kerstetter]

I like CD burner xp.  In spite of its name, it does work with windows 7.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Brian
Olesen
Sent: Saturday, August 24, 2013 9:13 AM
To: PC Audio Discussion List
Subject: Re: A good and free cd burning program?

Hi,
the best one is BurnAware.
There is a free version, and a very nice one called premium that also has
copying capabilities.

www.burnaware.com


-Oprindelig meddelelse-
From: Isaac
Sent: Saturday, August 24, 2013 1:50 PM
To: PC Audio Discussion List
Subject: Re: A good and free cd burning program?

imburn and imfarecorder
- Original Message -
From: John Chilelli j...@neo.rr.com
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Saturday, August 24, 2013 6:20 AM
Subject: A good and free cd burning program?


 Hi all,
 Sometime ago, folks were talking about a simple but good and free cd 
 burning program
 we can download to our computers.  Can someone please give me some good 
 suggestions
 to use in my recording studio? I don't care to use anything too complex.
 Thank you,
 John

 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org 


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: Altec Lansing Expressionists Speakers, Cheap Price But Not Cheap Sound

[dan Kerstetter]

I'd vouch for any of their speakers.  I've been using Altec Lansing speakers
for years.

Dan


-Original Message-
From: Pc-audio [mailto:pc-audio-boun...@pc-audio.org] On Behalf Of Peter
Scanlon
Sent: Sunday, June 30, 2013 3:35 PM
To: PC Audio Discussion List
Subject: Re: Altec Lansing Expressionists Speakers, Cheap Price But Not
Cheap Sound

These sound good for output for Jaws. Particularly as you say they have two
inputs, into which I could put inputs from two computers with Jaws.
Do you know if places like Dick Smith sell them?

P.


-Original Message-
From: Dane Trethowan
Sent: Thursday, June 27, 2013 6:40 PM
To: PC Audio Discussion List
Subject: Altec Lansing Expressionists Speakers, Cheap Price But Not Cheap
Sound

The subject line says it all when it comes to this pair of speakers.

The Altec Lansing Expressionists speakers have little in the way of features
but who really cares about that when cost is low and sound - for a pair of
desktop speakers - is worth recommending on its own.

The speaker system has only 3 buttons, power, volume up and volume down
which are situated on the rear of the right speaker.  the volume up and down
buttons are identifiable by the plus and minus signs, the power button is a
button with a detent, not that much different to the sort of button you'd
find at the bottom of an iPhone screen.

The Expressionists speakers are designed in such a way that they cannot be
easily knocked over, this is achieved by the speakers having cylinders at
the rear which touch the desk and rubber feet at the front, I also suspect
that the cylinders give an opportunity to the speakers to output more bass.

Each speaker contains 1 3 inch driver and sound is surprisingly good
throughout the spectrum.

The system has 2 3.5MM jack input sockets which are mixed together so 2
devices can be run simultaneously if required.

Volume is louder than I expected and the system does indeed deliver a good
punchy sound, nothing tinny about these speakers whatever.

If you want high performance for music or games then this speaker set is
obviously not the 1 to pick but if you have a very limited budget and want a
set of speakers with all round good performance without too much compromise
then this system at $50.00 is very hard to pass up, I'll be using this
speaker system until my Harman Kardon sound sticks arrive in a few weeks and
I have no trouble with that.



**

Dane Trethowan
Skype: grtdane12
Phone US (213) 438-9741
Phone U.K. 01245 79 0598
Phone Australia (03) 9005 8589
Mobile: +61400494862





To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org 


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: an importent sound card question.

[dan Kerstetter]

As long as you have the drivers for your second sound card installed and
either disable the first one or assign JAWS to the second one it should
work.

HTH

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of aadorno1
Sent: Monday, March 12, 2012 8:26 PM
To: PC Audio Discussion List
Subject: an importent sound card question.

Hi list I am getting ready to install a second sound card on my system now
this card comes with software do I install the software or will the computer
see it.  because usually if a person installs a second sound card jfw will
automatically go to that new card as the default card. now I would like to
know will the computer see this card or will I need to install the software?
thanks so much Angel.
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: looking for a good limiter for winamp

[dan Kerstetter]

I use SQRsoft advanced crossfading.  It should be in the plugins section of
the winamp page.

HTH

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Casey
Sent: Tuesday, January 03, 2012 4:59 PM
To: PC Audio
Subject: looking for a good limiter for winamp

Hi I would like to find a good limiter for win amp.
So that when I am playing MP3 files I don't have to reach for the volume and
turn it up and down.
While going from file to file because some are softer or louder then others.
I am using windows 7 home if that helps any.
And if anyone can post where to get any of these limiter suggestions.
So I would have an idea where to get them.
that would be a big help.
Thank you all and have a nice day.


-- 
Casey

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: looking for a good limiter for winamp

[dan Kerstetter]

My mistake.  It's SQR soft DSP.

Apologies for the brain hiccup.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Brett Boyer
Sent: Tuesday, January 03, 2012 9:45 PM
To: PC Audio Discussion List
Subject: Re: looking for a good limiter for winamp

I don't believe sqr is a limiter. It's just a crossfader and I don't think
it would do what he's looking for.
I use audiostocker but I don't think u can get it anymore.
Most people are now using the gain features of there media player to
normalize all mp3's individually, by album, folder, and/or playlist.
than it's set no matter what media player you use. I keep telling myself I'm
going to do that but I haven't yet, I take the lazy way out and use
audiostocker.
hth
bb
Brett Boyer
Audio Production and voice over
http://brettboyer.voices.com
Brett Boyer's Big Bag of Goodies!
Check out my radio show at my new home:
http://www.mushroomfm.com/brettboyer
every Monday 5 o'clock eastern 2 o'clock pacific Listen to the Shroom live!
http://listen.mushroomfm.com:8760/listen.pls
- Original Message -
From: dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Tuesday, January 03, 2012 6:52 PM
Subject: RE: looking for a good limiter for winamp


I use SQRsoft advanced crossfading.  It should be in the plugins 
section of  the winamp page.

 HTH

 Dan


 -Original Message-
 From: pc-audio-boun...@pc-audio.org 
 [mailto:pc-audio-boun...@pc-audio.org]
 On Behalf Of Casey
 Sent: Tuesday, January 03, 2012 4:59 PM
 To: PC Audio
 Subject: looking for a good limiter for winamp

 Hi I would like to find a good limiter for win amp.
 So that when I am playing MP3 files I don't have to reach for the 
 volume and turn it up and down.
 While going from file to file because some are softer or louder then 
 others.
 I am using windows 7 home if that helps any.
 And if anyone can post where to get any of these limiter suggestions.
 So I would have an idea where to get them.
 that would be a big help.
 Thank you all and have a nice day.


 -- 
 Casey

 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org


 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org 


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

SAPI 5 Voices

[dan Kerstetter]

Are there any other free voices for SAPI 5 besides Microsoft Sam?  If so,
where can I get them.

 

Thanks.

 

Dan

 

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Moving Music from iPod to Computer

[dan Kerstetter]

How do I move music from my iPod to iTunes?

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Looking for Crossfading Plugin

[dan Kerstetter]

Where can I get a good crossfading plugin such as SQR Soft advance
Crossfading?

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: Moving Music from iPod to Computer

[dan Kerstetter]

Thanks so much for the information.  I already have the iPod set up for me
to manually control music.  I can't seem to find anywhere in the preferences
to enable disk useage.  I don't think it would make a difference but this is
the iPod in my iPhone.

I would appreciate any help.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Victoria Vaughan
Sent: Saturday, October 08, 2011 5:42 PM
To: PC Audio Discussion List
Subject: Re: Moving Music from iPod to Computer

Hi Dan, I have not done this, but here are the steps given by Anna Dresner:
Good luck! Vicky
1. Connect the iPod. When iTunes opens, if you're asked if you want to sync 
with your iTunes library, say no, and enable disk use.

2. Use Windows Explorer to copy the iPod Control folder into the folder you 
use for your iTunes library. This will copy all the music, but the file 
names will be seemingly random combinations of letters and numbers.

3. Go to PReferences in iTunes by pressing Control-Comma. Switch to the 
Advanced tab in this multi-page dialog box, and check the Keep iTunes media 
folder Organized check box.

4. Go to the File menu in iTunes, choose ADd Folder to LIbrary, and select 
the iPod control folder. All the music will be added to your iTunes library,

and iTunes will name all the files based on their tags, so if the title, 
artist and album tags are correct, the music will be named and organized 
correctly.


- Original Message - 
From: dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Saturday, October 08, 2011 2:29 PM
Subject: Moving Music from iPod to Computer


 How do I move music from my iPod to iTunes?



 Dan



 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org




 ===
 Email scanned by PC Tools - No viruses or spyware found.
 (Email Guard: 7.0.0.21, Virus/Spyware Database: 6.18470)
 http://www.pctools.com/
 === 


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: Looking for Crossfading Plugin

[dan Kerstetter]

I downloaded the one from the winamp site but every time I try to make
changes in its configuration, it crashes winamp and the Watson debugger..
The plugin version is 1.75.  

If yours is different, I would appreciate a copy.  My email address is:

dh...@comcast.net

Thanks.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Barry Chapman
Sent: Saturday, October 08, 2011 9:13 PM
To: PC Audio Discussion List
Subject: Re: Looking for Crossfading Plugin

Hi Dan,

You say Where can I get a good crossfading plugin such as SQR Soft advance
Crossfading?  Well if that one is good and you are not 
looking for something to work with a different player than Winamp, why not
use it rather than looking for something else?  I realise 
the home page at http://sqrsoft.com.ar appears to have gone, but you can
still get it from various places including the Winamp site 
at http://www.winamp.com/plugin/sqrsoft-advanced-crossfading-output/32368

If the one on the Winamp site is not the most recent, which I think is
version 1.7.6.1180, and you can't find it elsewhere, let me 
know and I will email it to you.

Thanks,
Barry Chapman

- Original Message - 
From: dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Sunday, October 09, 2011 8:56 AM
Subject: Looking for Crossfading Plugin


Where can I get a good crossfading plugin such as SQR Soft advance
Crossfading?



Thanks.



Dan



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: iTunes Frustration

[dan Kerstetter]

If you can find a program called Revo Uninstaller, it should work.  I had a
similar problem with iTunes except that I couldn't even install a new
version

Revo Uninstaller has an advanced mode and it's very accessible.  You may
even have to run it more than once, but it did the trick for my iTunes
reinstall.

HTH

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Steve Matzura
Sent: Thursday, September 22, 2011 9:04 PM
To: pc-audio; player
Subject: iTunes Frustration

I've a particular machine on which I wish to install iTunes, current
version, I think it's 10.4.10. No matter what I do, no matter how many
times I completely remove, de-install, expunge iTunes, Quicktime,
Apple software update, Bonjour, Apple mobile device support and Apple
application support from my machine, cleaning out stuff in the
Documents and settings folder having anything whatsoever to do with
Apple or iTunes, ensuring the Program Files folder and Common Files
folder is clear of anything to do with Appleware, then re-installing
iTunes and rebooting just to make sure everything gets installed, I
plug in my iPhone, get the doo-ding USB device connected noise, and
sometimes I get the new hardware found message with the words Apple
mobile device and sometimes with the word iPhone after. Upon
opening iTunes, the iPhone does not appear. In fact, nothing in
Devices appears. I look in Control Panel / System / Hardware / Device
Manager / USB Devices and do not find anything installed there that
even remotely looks like a USB driver of any kind. There's a system
environment variable called devmgr_show_nonpresent_devices which, when
set to 1, will show you anything untoward in Device Manager. I have
this set thus, and I never see anything in USB devices. I can plug
other USB devices, such as disks, audio or MIDI interfaces, etc., SD
cards in readers, even the JAWS dongle, into any of the USB ports on
the machine, and they all work like they're supposed to. The only
thing I'm having trouble with is this darn iTunes device driver. I'd
would so much prefer to manage my iPhone on my PC than my wife's Mac,
but I suppose if I have to, I'll go that route, but I can't imagine
there's not some way to fix this problem. Any suggestions not
previously covered in the above are most welcome, with my undying
thanks in advance.

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: iTunes Frustration

[dan Kerstetter]

Sorry to hear it didn't work.  If you find some way to pull it off, could
you post it to the list?

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Steve Matzura
Sent: Friday, September 23, 2011 12:14 AM
To: PC Audio Discussion List
Subject: Re: iTunes Frustration

OK, I found, installed, and ran Revo Uninstaller. Very nice! Might
even buy the pro version. I'm sorry to report, however, that it did no
good whatsoever. It did no bad, either--i.e., it didn't break
anything--but when I picked the machine cleaner than a Sunday-dinner
chicken and installed iTunes once again, the very same things
happened. I plugged the iPhone into the USB port, and yes, I tried
various USB ports, I have six--four on the back, two on the front of
the box--got the dong-ding bells, got the message Found new hardware,
Apple Mobile Device USB, or maybe it was Apple Mobile USB Device,
either way, got that, followed by a little pop a few seconds later.
The device shows up in Control Panel / System / Hardware / Device
Manager / USB Controllers when iTunes is open and the device is
connected, but not otherwise. I still cannot find it in the tree view,
and iTunes didn't automatically launch its first-time startup wizard
either. There's somethin' seriously wrong here, I just wish I knew how
to figure it out, and ultimately, what it is.

On Thu, 22 Sep 2011 22:18:19 -0400, you wrote:

Thanks, Dan, I'm on the hunt for it now. Will report back forthwith.

On Thu, 22 Sep 2011 21:45:15 -0400, you wrote:

If you can find a program called Revo Uninstaller, it should work.  I had
a
similar problem with iTunes except that I couldn't even install a new
version

Revo Uninstaller has an advanced mode and it's very accessible.  You may
even have to run it more than once, but it did the trick for my iTunes
reinstall.

HTH

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Steve Matzura
Sent: Thursday, September 22, 2011 9:04 PM
To: pc-audio; player
Subject: iTunes Frustration

I've a particular machine on which I wish to install iTunes, current
version, I think it's 10.4.10. No matter what I do, no matter how many
times I completely remove, de-install, expunge iTunes, Quicktime,
Apple software update, Bonjour, Apple mobile device support and Apple
application support from my machine, cleaning out stuff in the
Documents and settings folder having anything whatsoever to do with
Apple or iTunes, ensuring the Program Files folder and Common Files
folder is clear of anything to do with Appleware, then re-installing
iTunes and rebooting just to make sure everything gets installed, I
plug in my iPhone, get the doo-ding USB device connected noise, and
sometimes I get the new hardware found message with the words Apple
mobile device and sometimes with the word iPhone after. Upon
opening iTunes, the iPhone does not appear. In fact, nothing in
Devices appears. I look in Control Panel / System / Hardware / Device
Manager / USB Devices and do not find anything installed there that
even remotely looks like a USB driver of any kind. There's a system
environment variable called devmgr_show_nonpresent_devices which, when
set to 1, will show you anything untoward in Device Manager. I have
this set thus, and I never see anything in USB devices. I can plug
other USB devices, such as disks, audio or MIDI interfaces, etc., SD
cards in readers, even the JAWS dongle, into any of the USB ports on
the machine, and they all work like they're supposed to. The only
thing I'm having trouble with is this darn iTunes device driver. I'd
would so much prefer to manage my iPhone on my PC than my wife's Mac,
but I suppose if I have to, I'll go that route, but I can't imagine
there's not some way to fix this problem. Any suggestions not
previously covered in the above are most welcome, with my undying
thanks in advance.

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: tapin radio yet again

[dan Kerstetter]

To add a station, I use the menus.  You can hit the alt key which opens the
menu bar, arrow over to favorites and down arrow to open the menu.  Within
the menu, there's an add to favorites choice.

Hope this helps and I hope I'm not repeating what someone else has already
said.  I haven't been following this thread too much.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Mary Otten
Sent: Sunday, August 28, 2011 6:20 PM
To: PC Audio Discussion List
Subject: Re: tapin radio yet again

Thanks Tom. What's weird is that when I activated the favorites
button directly, not with the shortcut key, I didn't see that add
choice, which as you note, is the one that's right under the cursor
when you hit the shortcut key. Weird. Thanks.

mary



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

One More Time for Skype Talking

[Dan Kerstetter]

I've reinstalled skype talking several times.  It just doesn't open when
pressing enter on its shortcut.  There's no error message; there's no disk
activity and of course, no skype talking in the system tray.

 

Any suggestions before I just give up on the program altogether?

 

Dan

 

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: One More Time for Skype Talking

[Dan Kerstetter]

Skype talking doesn't show up in the list of external programs to be allowed
by skype.  It just plain doesn't open.  Of course this had to happen when I
upgraded from the beta.  That one worked just the way it was supposed to.

-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of djc
Sent: Sunday, June 05, 2011 5:29 PM
To: pc-audio@pc-audio.org
Subject: Re: One More Time for Skype Talking

Dan the skype talking window normally is hidden. Did you tell skype to
allow it? You'll have to do that before it comes on. What it should do
normally when you hit the shortcut is to call skype. Let me know if what I
suggested resolves the issue. If not perhaps we can get together on the
phone and I can help you trouble shoot the issue.


*** REPLY SEPARATOR  ***

On 6/5/2011 at 3:08 PM Dan Kerstetter wrote:

I've reinstalled skype talking several times.  It just doesn't open when
pressing enter on its shortcut.  There's no error message; there's no disk
activity and of course, no skype talking in the system tray.

 

Any suggestions before I just give up on the program altogether?

 

Dan

 

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


For The Best In music Please Listen to the Legend.
http://legend-oldies.com
Please feel free to follow me on Twitter
http://twitter.com/djc500



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Problem with Skype Talking

[Dan Kerstetter]

Since I've updated skype, I also updated skype talking.  Skype talking will
not launch no matter what I've tried.  I've even gone to its folder in
program files and tried to start from its executable file.  Also after
trying to launch skype talking, I've launched skype and skype talking
doesn't show in the list of external programs to be authorized.

 

I would appreciate any help with correcting this problem.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Re: Problem with Skype Talking

[Dan Kerstetter]

It won't matter, as I'm using XP.

- Original Message - 
From: Matthew C matthew.care...@gmail.com

To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Saturday, May 14, 2011 3:07 PM
Subject: RE: Problem with Skype Talking



I am not sure if this will work but have you tried to run it as
administrator? Go to it and highlight it and in applications enter on run 
as

administrator. It will only take the first time to do this but it might
work.

-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Dan Kerstetter
Sent: Saturday, May 14, 2011 11:59 AM
To: 'PC Audio Discussion List'
Subject: Problem with Skype Talking

Since I've updated skype, I also updated skype talking.  Skype talking 
will

not launch no matter what I've tried.  I've even gone to its folder in
program files and tried to start from its executable file.  Also after
trying to launch skype talking, I've launched skype and skype talking
doesn't show in the list of external programs to be authorized.



I would appreciate any help with correcting this problem.



Dan



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org 



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Skype Talking

[Dan Kerstetter]

Where can I get the latest version of skype talking?

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Skype Updating Question

[Dan Kerstetter]

If I'm using Skype Talking with Skype, in which order should I update them?

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Updating Skype and Skype Talking

[Dan Kerstetter]

I use both Skype and Skype Talking.  Since they both run together which
should I update first?

 

Also is it necessary to reauthorize Skype Talking after any updates?

 

Dan

 

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Another ITunes Installation Question

[Dan Kerstetter]

Is there something I can do to cause my computer to act as if ITunes were
never installed? I'm trying to get everything ITunes out of my system so I
can reinstall it. The uninstalls for each Apple component don't work. I've
manually removed everything apple I can find, including the Apple Computer
and Apple, Inc. registry keys and the leftover folders which are normally
hidden and I still cannot reinstall Itunes.

 

I'm open for any suggestions.

 

Dan

 

 

 

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Error message when installing ITunes

[Dan Kerstetter]

When I try installing ITunes I get the error message that the old Apple
updater cannot be uninstalled and the operation ends with anything installed
being removed.

 

How can I fix this problem?

 

Any help would be appreciated.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: Reinstalling ITunes

[Dan Kerstetter]

I receive a message that the installation cannot complete.  Then the
installer removes what it has done thus far and tells me I can try it at a
later time.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Troy Sullivan
Sent: Tuesday, March 01, 2011 11:22 PM
To: PC Audio Discussion List
Subject: Re: Reinstalling ITunes

What errors do you get if any?
- Original Message - 
From: Dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Monday, February 28, 2011 11:44 PM
Subject: Reinstalling ITunes


 I'm running a properly updated XP Home machine.  I needed to uninstall
 ITunes for some reason.  Now when I try installing ITunes 10 again, I 
 can't
 get past the Quick Time installation and the process aborts.



 I would appreciate any suggestions as to how to get ITunes to reinstall.



 Thanks.



 Dan







 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org 


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Reinstalling ITunes

[Dan Kerstetter]

I'm running a properly updated XP Home machine.  I needed to uninstall
ITunes for some reason.  Now when I try installing ITunes 10 again, I can't
get past the Quick Time installation and the process aborts.

 

I would appreciate any suggestions as to how to get ITunes to reinstall.

 

Thanks.

 

Dan

 

 

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Skype Talking

[Dan Kerstetter]

Where can I download the latest version of Skype Talking?

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: FM Transmitters

[Dan Kerstetter]

I'm curious.  Is there a small FM transmitter I can use to cover one or two
rooms.  It doesn't have to be the whole house.  I'm only interested in
taking the sound from the computer I have in my bedroom and broadcasting it
to a stereo in the same room.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Bob Seed
Sent: Monday, August 02, 2010 11:31 AM
To: PC Audio Discussion List
Subject: Re: FM Transmitters

YES!
- Original Message - 
From: Dean Masters dwmast...@earthlink.net
To: PC Audio Pc-audio@pc-audio.org
Sent: Monday, August 02, 2010 11:15 AM
Subject: FM Transmitters


 Do FM transmitters transmit in stereo?
 
 Thanks,
 Dean
 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

VLC Media Player Question

[Dan Kerstetter]

I've reviewed the documentation for this player, such that it is, and cannot
find the answer to one basic question.

 

After having the DVD open I can't select an episode to play.  I go to the
navigation menu and I can see the titles submenu.  The titles are listed
numerically.  I'm guessing each numbered title is an episode.  When I pick
one and press enter sometimes it will switch to the episode.  Sometimes,
however, the player remains silent or switches back to the beginning of the
DVD.

 

 I would appreciate any help or suggestions.

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Playing DVD's on My Computer

[Dan Kerstetter]

Is Windows Media Player accessible for playing DVD's?  Also, if I'm playing
a movie with a DVS track is it possible to access it with WMP?

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Winamp 5.58

[Dan Kerstetter]

I've just installed winamp 5.58 on a machine using what I suppose to be the
classic skin; however, it looks nothing like the previously used classic
skin.  Is there a way to give 5.58 the classic feel: or am I forced to go
back to a previous version?

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: Winamp 5.58

[Dan Kerstetter]

I've set it back to the classic skin and it still has a different look to
it.  There's no playlist window, just a main window unless I've missed
settings somewhere.  I even ran the installation under the choice of
previous installation, thinking that would preserve the classic skin

Dan
.

-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of chris hallsworth
Sent: Wednesday, June 30, 2010 4:10 PM
To: PC Audio Discussion List
Subject: Re: Winamp 5.58

You may have installed the full, including the Winamp Modern Skin 
support. You can change the skin with ctrl+p for preferences or ctrl+k 
to jump to the skins category.


Signed by Chris Hallsworth
E-mail and Facebook: christopher...@googlemail.com
MSN: ch9...@hotmail.com
Skype: chrishallsworth7266
Twitter: http://twitter.com/christopherh40

On 30/06/2010 20:32, Dan Kerstetter wrote:
 I've just installed winamp 5.58 on a machine using what I suppose to be
the
 classic skin; however, it looks nothing like the previously used classic
 skin.  Is there a way to give 5.58 the classic feel: or am I forced to go
 back to a previous version?



 Dan



 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

iTunes Installation Problem

[Dan Kerstetter]

A few weeks ago, Apple's automatic updater ran and I was told there was a
new version of iTunes.  I pressed the install button.  The install could not
complete, however, and I received an error message about bonjour.  I tried
uninstalling the bonjour and installing something new from Apple called
bonjour printer services.  This did not solve the problem.

 

Is there a way I can uninstall everything and let iTunes start installing
itself from scratch?  I've tried a system restore to a point when I know it
was working properly.  This did not solve the problem.

 

I would appreciate any feedback on this.  I thought about using a sledge
hammer on my computer, but I didn't feel like cleaning up the mess.  LOL
Seriously I'll take any help I can get.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: Olympus DM520 Again

[Dan Kerstetter]

Thanks for your help Bob.

Your response brings me to two questions:

First, when you transfer music are you using any special software or just
doing it through my computer?

Secondly, I've been through all the settings on the 520 and cannot find a
setting to play all files.  How does one find that setting?

Thanks again.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Robert Logue
Sent: Sunday, June 06, 2010 2:24 AM
To: PC Audio Discussion List
Subject: Re: Olympus DM520 Again

First make sure they are in the proper format including bit rate.  I assume
you know how to navigate the music folder with the dm-520.  I find it
helpful  to turn play all files on in case there are sub folders.

When you go to the music folder and press the right arrow one or more times
you should hear one of them play if preview is on and if the files are
compatible. .

Bob
- Original Message - 
From: Dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Saturday, June 05, 2010 12:36 PM
Subject: Olympus DM520 Again


 Either I am incredibly dense or I have a problem somewhere.



 Using windows explorer I cut and pasted files into the music folder of the
 recorder.  They show up on the computer when I look at the recorder as a
 disk drive; but cannot access them on the recorder in the music folder.
 I've tried copying both folders and individual files to the recorder's
 music
 folder.



 I would appreciate any help or suggestions.



 Dan



 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org







No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.829 / Virus Database: 271.1.1/2919 - Release Date: 06/05/10
00:25:00

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: Olympus DM520 Again

[Dan Kerstetter]

After I asked those questions, I figured out the answers and set it up.  I
must say that I'm glad I use it mostly as a voice recorder.  For all the
trouble it doesn't do a good job of playing music.  I'm using mp3 files and
I get better sound out of my stream.

Thanks again for your help.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Robert Logue
Sent: Sunday, June 06, 2010 1:25 PM
To: PC Audio Discussion List
Subject: Re: Olympus DM520 Again

Play menu, playback mode setting, playback area setting, all files playback.

I transfer with WMP10.  But sometimes just copy and paste using Windows if 
I'm sure the file is in a compatible format.

Something I find difficult is if I set WMP to create folder hierarchy on 
device, (the default action), it is harder to find the music I want to play.

You use the up or down arrows to move to a folder which will be the artist, 
then the right arrow to move the album list.  Then right arrow again to get 
to the list of files in that folder.

The intro playback setting is under display and sound menu.

Bob
- Original Message - 
From: Dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Sunday, June 06, 2010 8:26 AM
Subject: RE: Olympus DM520 Again


 Thanks for your help Bob.

 Your response brings me to two questions:

 First, when you transfer music are you using any special software or just
 doing it through my computer?

 Secondly, I've been through all the settings on the 520 and cannot find a
 setting to play all files.  How does one find that setting?

 Thanks again.

 Dan


 -Original Message-
 From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
 On Behalf Of Robert Logue
 Sent: Sunday, June 06, 2010 2:24 AM
 To: PC Audio Discussion List
 Subject: Re: Olympus DM520 Again

 First make sure they are in the proper format including bit rate.  I 
 assume
 you know how to navigate the music folder with the dm-520.  I find it
 helpful  to turn play all files on in case there are sub folders.

 When you go to the music folder and press the right arrow one or more 
 times
 you should hear one of them play if preview is on and if the files are
 compatible. .

 Bob
 - Original Message - 
 From: Dan Kerstetter dh...@comcast.net
 To: 'PC Audio Discussion List' pc-audio@pc-audio.org
 Sent: Saturday, June 05, 2010 12:36 PM
 Subject: Olympus DM520 Again


 Either I am incredibly dense or I have a problem somewhere.



 Using windows explorer I cut and pasted files into the music folder of 
 the
 recorder.  They show up on the computer when I look at the recorder as a
 disk drive; but cannot access them on the recorder in the music folder.
 I've tried copying both folders and individual files to the recorder's
 music
 folder.



 I would appreciate any help or suggestions.



 Dan



 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org




 



 No virus found in this incoming message.
 Checked by AVG - www.avg.com
 Version: 9.0.829 / Virus Database: 271.1.1/2919 - Release Date: 06/05/10
 00:25:00

 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org


 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org







No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.829 / Virus Database: 271.1.1/2921 - Release Date: 06/06/10 
00:25:00

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Olympus DM520 Again

[Dan Kerstetter]

Either I am incredibly dense or I have a problem somewhere.

 

Using windows explorer I cut and pasted files into the music folder of the
recorder.  They show up on the computer when I look at the recorder as a
disk drive; but cannot access them on the recorder in the music folder.
I've tried copying both folders and individual files to the recorder's music
folder.

 

I would appreciate any help or suggestions.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Olympus DM520 Question

[Dan Kerstetter]

Is there a way to transfer music from my PC to the recorder without using
Windows Media Player or iTunes?  If not, how does one use Windows Media
Player to sync files to the recorder?

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: Olympus DM520 Question

[Dan Kerstetter]

I tried copying and pasting into the music folder using windows explorer.
The files showed up on the drive when plugged into the computer, but the
music folder had no files when I attempted to play using the recorder.


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Tim Noonan
Sent: Thursday, June 03, 2010 6:53 PM
To: 'PC Audio Discussion List'
Subject: RE: Olympus DM520 Question

You can access the recorder as a flash drive via usb, and if you copy non
DRM files across, everything should be fine. Formats it supports are MP3,
WMA (non drm and perhaps not the latest version).  

I haven't tried to access DRM protected WMA files on the unit, which would
perhaps involve the software provided with the machine, which isn't that
accessible, from what I recall folks saying.

Hope this helps a little
Tim

Tim Noonan
Director, Vocal Branding Australia
Voices that Perfectly Express the Essence of your Brand 
Phone:   +61 419 779 669
Web: www.vocalbranding.com.au
Email:   t...@vocalbranding.com.au
Twitter: www.twitter.com/VocalEssence
Skype: TimNoonan
-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Dan Kerstetter
Sent: Friday, June 04, 2010 5:30 AM
To: 'PC Audio Discussion List'
Subject: Olympus DM520 Question

Is there a way to transfer music from my PC to the recorder without using
Windows Media Player or iTunes?  If not, how does one use Windows Media
Player to sync files to the recorder?

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: tv tuner card that will work on satlite dishes?

[Dan Kerstetter]

On another note, is there a way, with a tuner card or any other means, I can
control anything besides the DVR feature on my dish network via computer?
As it is, unless I'm incredibly stupid the DVR screen looks terrible.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of hank smith
Sent: Friday, March 19, 2010 2:10 AM
To: PC Audio Discussion List
Subject: Re: tv tuner card that will work on satlite dishes?

agreed
- Original Message - 
From: Marsha marcat...@yahoo.com
To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Thursday, March 18, 2010 7:16 PM
Subject: Re: tv tuner card that will work on satlite dishes?


 There must be something which will work because they say you can now 
 program
 the satellite receiver from your sell phone or laptop.

 Marsha




 To unsubscribe from this list, send a blank email to:
 pc-audio-unsubscr...@pc-audio.org 


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Crossfading Plugins

[Dan Kerstetter]

Where can I find the latest version of the SQR Soft crossfading plugin or
something as good or better?

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Locating a Winamp Plugin

[Dan Kerstetter]

Does anyone know where I can get the latest SQR crossfading plugin.  The 
version I have is not working with the two latest versions of winamp

Thanks.


Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Fooba 2000 question

[Dan Kerstetter]

If anyone on the list is using this audio player, is there a way to adjust it's 
volume so one can hear speech?

Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Auto-Tune

[Dan Kerstetter]

I was just looking at the auto-tune software for fixing vocals.  Does anyone on 
this list know of similar software which might be free?

Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Re: c.dex problem still not solved

[Dan Kerstetter]

If you go to the settings by pressing f4 and find the file and directory 
tab, you can browse and specify a place to put your files.  Mine are set to 
go to albums/extractions.


HTH

Dan


--
From: joe bollard joebolla...@eircom.net
Sent: Saturday, January 02, 2010 3:44 PM
To: pc -audio pc-audio@pc-audio.org
Subject: c.dex problem still  not solved

hello casey, that's exactly what happens on  my desktop pc, but it doesn't 
happen on my laptop,i do have a folder in my documents  called my 
music  but there is nothing in it, so i am wondering if i should unload 
c.dex  and download it again, everything works fine on my desktop pc as i 
say, but i want to be able to rip stuff using my laptop instead of 
spending hours up in my room on the pc up there, it really is a puzzle, by 
the way, c.dex was on my laptop when i bought it, my mother used to say, 
when joe has a problem, it really is a problem  wasn't she right, take 
care, regards from ireland, joe.

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org 



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

GOM Player Documentation

[Dan Kerstetter]

Perhaps I'm missing something here, but where on the GOM Player page can I find 
help files or a user's guide?

Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Please Disregard My Last Posting

[Dan Kerstetter]

I've just found a user manual.

Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

iTunes 9 Library Questions

[Dan Kerstetter]

When I add folders to my library, how can I keep duplicate songs from being 
added?

If duplicates have been already added is there a way to remove them?

Thanks.

Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Sorry

[Dan Kerstetter]

Sorry about my previous posting.  It was supposed to go to a different list.  
I'm using a new email program and got the wrong address.

Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Re: Splitting a File into Tracks with MP3 Direct Cut

[Dan Kerstetter]

So How can you tell when the track has ended since there doesn't seem to be 
a way to play tracks?


Dan

,
- Original Message - 
From: Rich De Steno ironr...@verizon.net

To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Monday, September 14, 2009 10:21 PM
Subject: Re: Splitting a File into Tracks with MP3 Direct Cut


You can manually split the file into tracks, going track by track.  Press 
B at the beginning of the track and then press N at the end of the track. 
Press CTRL+E to save this selected track to a new file.  You do this for 
each track and you will have a separate MP3 file for each track.


- Original Message - 
From: Dan Kerstetter dh...@comcast.net

To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Monday, September 14, 2009 9:15 PM
Subject: Splitting a File into Tracks with MP3 Direct Cut


Is there a way I can use MP3 direct cut either to manually or 
automatically split an album file into tracks?


Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org 



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Re: Splitting a File into Tracks with MP3 Direct Cut

[Dan Kerstetter]

Forgive me for sounding stupid, but how does one listen to music with this 
program.  I've seen  no reference to a player.


Thanks.

Dan

- Original Message - 
From: Rich De Steno ironr...@verizon.net

To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Wednesday, September 16, 2009 8:19 PM
Subject: Re: Splitting a File into Tracks with MP3 Direct Cut


Only by listening.  You can jump ahead or back with right and left arrows 
or in bigger jumps with Page Down and page up.


- Original Message - 
From: Dan Kerstetter dh...@comcast.net

To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Wednesday, September 16, 2009 8:05 PM
Subject: Re: Splitting a File into Tracks with MP3 Direct Cut


So How can you tell when the track has ended since there doesn't seem to 
be a way to play tracks?


Dan

,
- Original Message - 
From: Rich De Steno ironr...@verizon.net

To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Monday, September 14, 2009 10:21 PM
Subject: Re: Splitting a File into Tracks with MP3 Direct Cut


You can manually split the file into tracks, going track by track. 
Press B at the beginning of the track and then press N at the end of the 
track. Press CTRL+E to save this selected track to a new file.  You do 
this for each track and you will have a separate MP3 file for each 
track.


- Original Message - 
From: Dan Kerstetter dh...@comcast.net

To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Monday, September 14, 2009 9:15 PM
Subject: Splitting a File into Tracks with MP3 Direct Cut


Is there a way I can use MP3 direct cut either to manually or 
automatically split an album file into tracks?


Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org 



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Re: Splitting a File into Tracks with MP3 Direct Cut

[Dan Kerstetter]

Isn't there a winamp llugin that can be used so the music can be played 
while working with it?


Dan

- Original Message - 
From: Rich De Steno ironr...@verizon.net

To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Monday, September 14, 2009 10:21 PM
Subject: Re: Splitting a File into Tracks with MP3 Direct Cut


You can manually split the file into tracks, going track by track.  Press 
B at the beginning of the track and then press N at the end of the track. 
Press CTRL+E to save this selected track to a new file.  You do this for 
each track and you will have a separate MP3 file for each track.


- Original Message - 
From: Dan Kerstetter dh...@comcast.net

To: PC Audio Discussion List pc-audio@pc-audio.org
Sent: Monday, September 14, 2009 9:15 PM
Subject: Splitting a File into Tracks with MP3 Direct Cut


Is there a way I can use MP3 direct cut either to manually or 
automatically split an album file into tracks?


Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org 



To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Splitting a File into Tracks with MP3 Direct Cut

[Dan Kerstetter]

Is there a way I can use MP3 direct cut either to manually or automatically 
split an album file into tracks?

Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

Winamp 5.56 on a Netbook

[Dan Kerstetter]

I have Winamp 5.56 installed on my netbook and use System Access as the screen 
reader.  I did the installation as a light one, as I don't have much drive 
space.  I play the music from a networked storage drive.

All works well with the exception of the playlist window.  All I get for each 
track listing is a couple of random numbers?

Is there a way to fix this problem?

Thanks.

Dan
To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

CD Ripping Question

[Dan Kerstetter]

I'm just wondering, besides Windows Media Player, what people are using
these days to rip CD.  I tried GoldWave but for some reason the data base
doesn't function properly.

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: CD Ripping Question

[Dan Kerstetter]

That's what I used to use, but when I went to update it, there was no new
version.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Sylvia
Sent: Tuesday, June 02, 2009 12:07 PM
To: PC Audio Discussion List
Subject: Re: CD Ripping Question

I normally use cdex to rip cd's. Its a free program and works quite well.

- Original Message - 
From: Dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Tuesday, June 02, 2009 12:10 PM
Subject: CD Ripping Question


I'm just wondering, besides Windows Media Player, what people are using
these days to rip CD.  I tried GoldWave but for some reason the data base
doesn't function properly.

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: CD Ripping Question

[Dan Kerstetter]

I think the last version I had was 1.50 or something.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Sylvia
Sent: Tuesday, June 02, 2009 12:16 PM
To: PC Audio Discussion List
Subject: Re: CD Ripping Question

What version were you using?

- Original Message - 
From: Dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Tuesday, June 02, 2009 12:18 PM
Subject: RE: CD Ripping Question


That's what I used to use, but when I went to update it, there was no new
version.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Sylvia
Sent: Tuesday, June 02, 2009 12:07 PM
To: PC Audio Discussion List
Subject: Re: CD Ripping Question

I normally use cdex to rip cd's. Its a free program and works quite well.

- Original Message - 
From: Dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Tuesday, June 02, 2009 12:10 PM
Subject: CD Ripping Question


I'm just wondering, besides Windows Media Player, what people are using
these days to rip CD.  I tried GoldWave but for some reason the data base
doesn't function properly.

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

RE: CD Ripping Question

[Dan Kerstetter]

Is there a place from which I can download that version.  I lost it on a
computer crash last year.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Sylvia
Sent: Tuesday, June 02, 2009 1:13 PM
To: PC Audio Discussion List
Subject: Re: CD Ripping Question

oh that's 1.51. You really don't need to upgrade the software. 

- Original Message - 
From: Dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Tuesday, June 02, 2009 1:15 PM
Subject: RE: CD Ripping Question


I think the last version I had was 1.50 or something.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Sylvia
Sent: Tuesday, June 02, 2009 12:16 PM
To: PC Audio Discussion List
Subject: Re: CD Ripping Question

What version were you using?

- Original Message - 
From: Dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Tuesday, June 02, 2009 12:18 PM
Subject: RE: CD Ripping Question


That's what I used to use, but when I went to update it, there was no new
version.

Dan


-Original Message-
From: pc-audio-boun...@pc-audio.org [mailto:pc-audio-boun...@pc-audio.org]
On Behalf Of Sylvia
Sent: Tuesday, June 02, 2009 12:07 PM
To: PC Audio Discussion List
Subject: Re: CD Ripping Question

I normally use cdex to rip cd's. Its a free program and works quite well.

- Original Message - 
From: Dan Kerstetter dh...@comcast.net
To: 'PC Audio Discussion List' pc-audio@pc-audio.org
Sent: Tuesday, June 02, 2009 12:10 PM
Subject: CD Ripping Question


I'm just wondering, besides Windows Media Player, what people are using
these days to rip CD.  I tried GoldWave but for some reason the data base
doesn't function properly.

 

Thanks.

 

Dan

 

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org

To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org


To unsubscribe from this list, send a blank email to:
pc-audio-unsubscr...@pc-audio.org