Re: [Repeater-Builder] Zetron SCU controller

2008-10-11 Thread scomind
Hi Ian,
 
Does anyone have any info on the unit in question that generated  those 
tones? I'd love to find one - just for memorabilia.
 
That tone format has been around for a long time in  mobile radio (Motorola 
Quik-Call I) and is still being used in  aviation (ICAO SELCAL) to page 
aircraft on the company  channel. A chime informs the flight crew that a  
message 
follows (in case the volume has been turned down -- it happens  when you have 
three radios going... :-).
 
Aviation uses SELCAL on VHF-AM and HF  channels, but on HF the tones are sent 
with amplitude modulation to ensure  proper decoding while the conversations 
take place on  SSB.
 
Our air/ground interconnect and 7330 repeater  controller support SELCAL 
because commercial customers still use  it.
 
73,
Bob

Bob Schmid,  WA9FBO, Member
S-COM, LLC
PO Box 1546
LaPorte CO  80535-1546
970-416-6505 voice
970-419-3222  fax
www.scomcontrollers.com

**New MapQuest Local shows what's happening at your destination.  
Dining, Movies, Events, News  more. Try it out 
(http://local.mapquest.com/?ncid=emlcntnew0002)


Re: [Repeater-Builder] Zetron SCU controller

2008-10-11 Thread Milt
Lots of equipment can encode the 2+2 Quick Call format but since today's 
decoders are software based (counting squared off audio waveforms) instead of 
hardware based (mechanical reeds) nothing I have seen recently will accurately 
decode the format.

Milt
N3LTQ

  - Original Message - 
  From: [EMAIL PROTECTED] 
  To: Repeater-Builder@yahoogroups.com 
  Sent: Saturday, October 11, 2008 6:37 PM
  Subject: Re: [Repeater-Builder] Zetron SCU controller


  Hi Ian,

  Does anyone have any info on the unit in question that generated those 
  tones? I'd love to find one - just for memorabilia.

  That tone format has been around for a long time in mobile radio (Motorola 
Quik-Call I) and is still being used in aviation (ICAO SELCAL) to page aircraft 
on the company channel. A chime informs the flight crew that a message follows 
(in case the volume has been turned down -- it happens when you have three 
radios going... :-).

  Aviation uses SELCAL on VHF-AM and HF channels, but on HF the tones are sent 
with amplitude modulation to ensure proper decoding while the conversations 
take place on SSB.

  Our air/ground interconnect and 7330 repeater controller support SELCAL 
because commercial customers still use it.

  73,
  Bob


  Bob Schmid, WA9FBO, Member
  S-COM, LLC
  PO Box 1546
  LaPorte CO 80535-1546
  970-416-6505 voice
  970-419-3222 fax
  www.scomcontrollers.com





--
  New MapQuest Local shows what's happening at your destination. Dining, 
Movies, Events, News  more. Try it out! 
   

Re: [Repeater-Builder] Zetron SCU controller

2008-10-11 Thread Chuck Kelsey
Yet is should. It's no different than DTMF.

Chuck
WB2EDV



  - Original Message - 
  From: Milt 
  To: Repeater-Builder@yahoogroups.com 
  Sent: Saturday, October 11, 2008 7:29 PM
  Subject: Re: [Repeater-Builder] Zetron SCU controller


  Lots of equipment can encode the 2+2 Quick Call format but since today's 
decoders are software based (counting squared off audio waveforms) instead of 
hardware based (mechanical reeds) nothing I have seen recently will accurately 
decode the format.

  Milt
  N3LTQ



[Repeater-Builder] Zetron SCU controller

2008-10-10 Thread Ian Miller
Hi fellows. This is a little off topic, but lately I have been watching 
and taping the old EMERGENCY! shows on WRTN Buffalo on DISH Network. 
4PM eastern.

From reading on some fan sites, the dispatcher, Sam Lanier, who was a 
real LA County fire dispatcher, used a ZETRON Station control unit to 
send out those tones that were heard in the station, and opened the 
doors.

Does anyone have any info on the unit in question that generated those 
tones?  I'd love to find one - just for memorabilia.

Thanks again
Ian
VA2IR
VE2RMP VHF/UHF Repeater group
Irlp Nodes 2570 and 2006



Re: [Repeater-Builder] Zetron SCU controller

2008-10-10 Thread Tedd Doda
On Fri, 10 Oct 2008 15:52:34 -, Ian Miller wrote:

shows on WRTN Buffalo on DISH Network. 
VA2IR

I'm SURE you meant Expressvu or Starchoiceright :)

Tedd Doda, VE3TJD
Lazer Audio and Electronics
ESSO plaza at exit 268 off HWY 401
Phone: 519-513-0377

My idea of a Symphony
8 Pistons playing the tune my right foot tells them to.




Re: [Repeater-Builder] Zetron SCU controller

2008-10-10 Thread Chuck Kelsey
They may have used a Zetron in later years, but at the time the program was 
made, Zetron wasn't in existence.

See this and you'll have what you seek:

http://www.policeinterceptor.com/emerg.htm

Chuck
WB2EDV



- Original Message - 
From: Ian Miller [EMAIL PROTECTED]
To: Repeater-Builder@yahoogroups.com
Sent: Friday, October 10, 2008 11:52 AM
Subject: [Repeater-Builder] Zetron SCU controller


 Hi fellows. This is a little off topic, but lately I have been watching
 and taping the old EMERGENCY! shows on WRTN Buffalo on DISH Network.
 4PM eastern.

 From reading on some fan sites, the dispatcher, Sam Lanier, who was a
 real LA County fire dispatcher, used a ZETRON Station control unit to
 send out those tones that were heard in the station, and opened the
 doors.

 Does anyone have any info on the unit in question that generated those
 tones?  I'd love to find one - just for memorabilia.

 Thanks again
 Ian
 VA2IR
 VE2RMP VHF/UHF Repeater group
 Irlp Nodes 2570 and 2006


 



 Yahoo! Groups Links