Re: [Samba] RPC fault code DCERPC_FAULT_OP_RNG_ERROR received from host
On Fri, May 29, 2009 at 10:58:41PM +0200, Marc Muehlfeld wrote: I saw on my member servers in winbindd.log sometimes the following message appearing: [2009/05/29 21:51:53, 1] rpc_client/cli_pipe.c:cli_pipe_validate_current_pdu(755) cli_pipe_validate_current_pdu: RPC fault code DCERPC_FAULT_OP_RNG_ERROR received from host GENOME, pipe \lsarpc, fnum 0x7101! What does this error mean and how can I fix it? PDC and meber server are running 3.3.4. That's normal. It's our way to figure out if the DC is ADS or not. The error message is normal, we might increase the log level of it. Volker pgpAFjE9sT2u2.pgp Description: PGP signature -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
[Samba] Printer Question
Hi! Not sure that this is the right list, but has anyone had any experience setting up a Konica Minolta Bizhub printer to use ldap authentication through samba? I know that the bizhub 250 that i have has built-in authentication, but it's really ridiculous when using the official linux drivers (they only support a one number username and a one number password e.g. 1:5 or similar). And since I'm setting up an ldap server it would be nice to handle all the authentication there instead of in the printer :/ /yosh -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Problems starting Server 2008 x64 after added to samba domain
Am Freitag, den 29.05.2009, 21:42 +0200 schrieb Robert Ludvik: Hi I have a problem with Windows Server Ent (and Std) 2008 x64 running on IBM Blade Center. I can add it to the Samba domain but when I restart it, it comes to Applying computer settings... and if I connect with rdesktop I can see a screen saying Please wait for the group policy client and after some minutes it restarts. I can boot it in Safe mode, remove from domain and it will start with no problem. I have no issues with Server 2008 Ent 32 bit running on PC. Any ideas where can I look for help? I installed all updates and SP2 ... Robert Ludvik Hello Robert, excuse me for my english i am german people and my english is very terrible. Can you tell me, what is your gateway an the 2008 Server? the gateway looks to the samba domaincontroller? If not please configure that and test again. please tell me that. -- Regards, C. Weiligmann --- Erfolg im Leben ist nicht eine Sache von Glück, sondern das Streben und die Beharrlichkeit Dinge zu vollenden signature.asc Description: Dies ist ein digital signierter Nachrichtenteil -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
[Samba] ctdb with samba and filesystem
Hello together, i have a question about Samba an CTDB. I configure Samba and CTDB from the wiki whitepapers all works but i have a nice error line in my logs ERROR: recovery lock file /data1/storage not locked when recovering! the filesystem is a ext3 and my question is : which filesystem and what lockprotocol must be set so that CTDB works: gfs lock-dlm? Must be use a filesystem cluster?? My distribution is ubuntu 8.04 LTS. Regards, C. Weiligmann signature.asc Description: Dies ist ein digital signierter Nachrichtenteil -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Problems starting Server 2008 x64 after added to samba domain
Christian Weiligmann pravi: Am Freitag, den 29.05.2009, 21:42 +0200 schrieb Robert Ludvik: Hi I have a problem with Windows Server Ent (and Std) 2008 x64 running on IBM Blade Center. I can add it to the Samba domain but when I restart it, it comes to Applying computer settings... and if I connect with rdesktop I can see a screen saying Please wait for the group policy client and after some minutes it restarts. I can boot it in Safe mode, remove from domain and it will start with no problem. I have no issues with Server 2008 Ent 32 bit running on PC. Any ideas where can I look for help? I installed all updates and SP2 ... Robert Ludvik Hello Robert, excuse me for my english i am german people and my english is very terrible. Can you tell me, what is your gateway an the 2008 Server? the gateway looks to the samba domaincontroller? If not please configure that and test again. please tell me that. Hi Christian. PDC is in network 192.168.220.0/24, Server 2008 is in network 192.168.6.0/24 (gateway 192.168.6.1), there is a VPN between (over 100 Mbps copper), firewall allows all traffic between these two networks, I can ping and telnet to all open ports on PDC. Three is also an BDC in the 192.168.6.0/24 network. I use Fedora DS for LDAP and Samba 3.3. on both machines (PDC and BDC). I can add Server to domain with no problem. Can this be related with x64 server version? I don't have these problems on Server 2008 32-bit in the same environment. Regards. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Problems starting Server 2008 x64 after added to samba domain
Hello Robert, apologize, I dont knew the network topology, I have no windows 2008 64 bit or 32 otherwise I would be test for you. the logs of samba says nothing about it or the logs of win 2008? can you test the constellation in the same subnet without the coppler? sorry about this.. Am Samstag, den 30.05.2009, 15:54 +0200 schrieb Robert Ludvik: Christian Weiligmann pravi: Am Freitag, den 29.05.2009, 21:42 +0200 schrieb Robert Ludvik: Hi I have a problem with Windows Server Ent (and Std) 2008 x64 running on IBM Blade Center. I can add it to the Samba domain but when I restart it, it comes to Applying computer settings... and if I connect with rdesktop I can see a screen saying Please wait for the group policy client and after some minutes it restarts. I can boot it in Safe mode, remove from domain and it will start with no problem. I have no issues with Server 2008 Ent 32 bit running on PC. Any ideas where can I look for help? I installed all updates and SP2 ... Robert Ludvik Hello Robert, excuse me for my english i am german people and my english is very terrible. Can you tell me, what is your gateway an the 2008 Server? the gateway looks to the samba domaincontroller? If not please configure that and test again. please tell me that. Hi Christian. PDC is in network 192.168.220.0/24, Server 2008 is in network 192.168.6.0/24 (gateway 192.168.6.1), there is a VPN between (over 100 Mbps copper), firewall allows all traffic between these two networks, I can ping and telnet to all open ports on PDC. Three is also an BDC in the 192.168.6.0/24 network. I use Fedora DS for LDAP and Samba 3.3. on both machines (PDC and BDC). I can add Server to domain with no problem. Can this be related with x64 server version? I don't have these problems on Server 2008 32-bit in the same environment. Regards. -- Mit freundlichen Grüßen Christian Weiligmann --- Erfolg im Leben ist nicht eine Sache von Glück, sondern das Streben und die Beharrlichkeit Dinge zu vollenden signature.asc Description: Dies ist ein digital signierter Nachrichtenteil -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Vulnerabilities reported by Qualys scan
On Thursday 28 May 2009 16:29:07 Quinn Fissler wrote: Yes - and I remember how frustrating it can be googling for info on rid cycling... I expect that there is a SaMBa hardening how-to somewhere... For all I can see all you need to do is to disable guest access. That seems pretty easy. Cheers, Kai -- Kai Blin WorldForge developer http://www.worldforge.org/ Wine developerhttp://wiki.winehq.org/KaiBlin Samba team member http://www.samba.org/samba/team/ -- Will code for cotton. signature.asc Description: This is a digitally signed message part. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Problems starting Server 2008 x64 after added to samba domain
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Robert Ludvik wrote: Hi I have a problem with Windows Server Ent (and Std) 2008 x64 running on IBM Blade Center. I can add it to the Samba domain but when I restart it, it comes to Applying computer settings... and if I connect with rdesktop I can see a screen saying Please wait for the group policy client and after some minutes it restarts. I can boot it in Safe mode, remove from domain and it will start with no problem. I have no issues with Server 2008 Ent 32 bit running on PC. Any ideas where can I look for help? I installed all updates and SP2 ... What version of Samba is this ? Guenther - -- Günther DeschnerGPG-ID: 8EE11688 Red Hat gdesch...@redhat.com Samba Team g...@samba.org -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Fedora - http://enigmail.mozdev.org iEYEARECAAYFAkohnHcACgkQSOk3aI7hFoh5LwCgloei6XiMcrxrOioOcxgfxnJT ggoAnRs+sKCPOFJGQ6WAftdiSYOZVl9+ =/eXD -END PGP SIGNATURE- -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] Problems starting Server 2008 x64 after added to samba domain
Guenther Deschner pravi: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Robert Ludvik wrote: Hi I have a problem with Windows Server Ent (and Std) 2008 x64 running on IBM Blade Center. I can add it to the Samba domain but when I restart it, it comes to Applying computer settings... and if I connect with rdesktop I can see a screen saying Please wait for the group policy client and after some minutes it restarts. I can boot it in Safe mode, remove from domain and it will start with no problem. I have no issues with Server 2008 Ent 32 bit running on PC. Any ideas where can I look for help? I installed all updates and SP2 ... What version of Samba is this ? Guenther Sorry, Samba 3.3.3 on CentOS 5 and fedora DS 1.0.4. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
[Samba] logon script
Hi, I have configured a samba PDC with a logon script. The logon script includes dos commands to map a drive letter for different shares. One share has user home directory, one has common folder for all the users and other share is group share. For assigning a drive letter to group share I have used the command net use g: \\%L\group\%G but group share drive is not mounting for any of the users. I have three groups tech,mktg and sales. I want to mount tech share for tech group and that particular share only should be mounted as group share for tech group users and same for mktg and sales. Can you please help me out in solving this issue. please assist me in giving correct parameters and path. Thank You. Regards, Santy -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
Re: [Samba] logon script
I have configured a samba PDC with a logon script. The logon script includes dos commands to map a drive letter for different shares. One share has user home directory, one has common folder for all the users and other share is group share. For assigning a drive letter to group share I have used the command net use g: \\%L\group\%G but group share drive is not mounting for any of the users. I have three groups tech,mktg and sales. I want to mount tech share for tech group and that particular share only should be mounted as group share for tech group users and same for mktg and sales. Can you please help me out in solving this issue. please assist me in giving correct parameters and path. Put the following parameter in your smb.conf: logon script = %G.bat Then, create a script named after each group in your netlogon share, in your case tech.bat, mktg.bat and sales.bat. The script corresponding to the group the particular user belongs to will be executed upon logon. To map the shares to drives, the script should contain commands in the folllowing format: net use g: \\server\sharename (The drive letter to use depends, of course, on your particular case). See Variable substitutions on the smb.conf man page. -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
[Samba] Is building a load balance setup like this workable?
Okay, before anything else, all I'm using samba for is a Windows looking frontend to cups. Eg, so the users don't know I'm getting rid of the windows 2003 printserver and replacing it with a pair of linux printservers (Samba/Cups) I'd like to have 2 (or 3) printservers, all the same build of linux (debian), cloned, etc. users will be able to go to \\printserver and it'll pull up one of 10.6.0.19, 10.6.0.20, etc. Right now this works fine. I've been serving over 505 printers on this now for 6 months and it's a good thing. The issue I have is growing this to more than two servers - what if I want to have 5 servers, etc. So, to my way of thinking, I'll have an nfs mount that is shared amongst all the servers - /var/cache/samba, /etc/samba, /etc/cups, /var/lib/samba, etc - whatever it is that samba changes. Now... I'm guessing I'll need a filesystem able to deal with multiple servers using that mount as r/w, so maybe it'll be an iscsi mount with the right fs. Anyway, what I'm after is to make changes to one server and have it propagate to all servers. i'm not concerned if I need to have a special server that I make the changes to, or if it's just that I can make changes to any in thecluster. i'm hesitant to actually call this a cluster as I'm not quite sure it's what I'm after. anyway, anyone have suggestions for how to get this done? thanks Jack -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba
[SCM] Samba Shared Repository - branch master updated - release-4-0-0alpha7-1917-g625851a
The branch, master has been updated
via 625851a50f74024f5918e0b348147457c2cc42ea (commit)
from df167ee7712a9c92fcb6ca1541dc4d1e5d93da02 (commit)
http://gitweb.samba.org/?p=samba.git;a=shortlog;h=master
- Log -
commit 625851a50f74024f5918e0b348147457c2cc42ea
Author: Volker Lendecke v...@samba.org
Date: Sat May 30 09:49:17 2009 +0200
Handle EINTR in async_sock.c
---
Summary of changes:
lib/async_req/async_sock.c | 16
1 files changed, 16 insertions(+), 0 deletions(-)
Changeset truncated at 500 lines:
diff --git a/lib/async_req/async_sock.c b/lib/async_req/async_sock.c
index 09eec10..d88edb1 100644
--- a/lib/async_req/async_sock.c
+++ b/lib/async_req/async_sock.c
@@ -81,6 +81,10 @@ static void async_send_handler(struct tevent_context *ev,
tevent_req_data(req, struct async_send_state);
state-sent = send(state-fd, state-buf, state-len, state-flags);
+ if ((state-sent == -1) (errno == EINTR)) {
+ /* retry */
+ return;
+ }
if (state-sent == -1) {
tevent_req_error(req, errno);
return;
@@ -148,6 +152,10 @@ static void async_recv_handler(struct tevent_context *ev,
state-received = recv(state-fd, state-buf, state-len,
state-flags);
+ if ((state-received == -1) (errno == EINTR)) {
+ /* retry */
+ return;
+ }
if (state-received == -1) {
tevent_req_error(req, errno);
return;
@@ -427,6 +435,10 @@ static void writev_handler(struct tevent_context *ev,
struct tevent_fd *fde,
}
written = writev(state-fd, state-iov, state-count);
+ if ((written == -1) (errno = EINTR)) {
+ /* retry */
+ return;
+ }
if (written == -1) {
tevent_req_error(req, errno);
return;
@@ -534,6 +546,10 @@ static void read_packet_handler(struct tevent_context *ev,
nread = recv(state-fd, state-buf+state-nread, total-state-nread,
0);
+ if ((nread == -1) (errno == EINTR)) {
+ /* retry */
+ return;
+ }
if (nread == -1) {
tevent_req_error(req, errno);
return;
--
Samba Shared Repository
