Re: Is the list still working?
How do we reach all these poor guys , that are cut off the list??? Octavian Ureche okt...@gmail.com hat am 25. Mai 2012 um 14:24 geschrieben: pong?
Extrud questions
Hey folks, Does anybody know, if there is solution to the following issue. I have a minigun and an ammo backpack. I have to make the ammo belt. I have to make sure, that the beginning and the ending cross-section fits into the slots. Technically I want to make sure, that the extrusion starts from a given profile and ends in a given profile without any roll and so on that used the happen in XSI. Huh Cheers Szabolcs ___ This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version. Crytek GmbH - http://www.crytek.com - Grüneburgweg 16-18, 60322 Frankfurt - HRB77322 Amtsgericht Frankfurt a. Main- UST IdentNr.: DE20432461 - Geschaeftsfuehrer: Avni Yerli, Cevat Yerli, Faruk Yerli
Re: Is the list still working?
Anyone cut off from this list has been aggressively terminated via digital selection through the Web's new rogue intelligence program U-N-C-O-E-X-I-S-T. Daniel VFXM My country can bench press your country with one arm.
Re: Split ice cloud into randomised collections.
Ah yes, I was being a little dense... Thanks, A. From: pete...@skynet.be pete...@skynet.be To: softimage@listproc.autodesk.com Sent: Thursday, 24 May 2012, 19:51 Subject: Re: Split ice cloud into randomised collections. not sure what you are trying to achieve - but I think you might use state_ID. assign a random state ID to the particles, (eg. random value scalar to integer set data state_ID) or using modulo indeed. and then use a select_case node, driven by get data state_ID this way you can manipulate them independently very well - the different cases are the different states. its usefull in a number of ways, for instance in the case node you can have a different value for each case to drive any parameter. or you can plug for instance different forces in each case or have an execute node and a whole network in each case. you can plug a different instance shape node in each one. there is a ton you can achieve with this approach without using a state_machine. -Original Message- From: Chris Chia Sent: Thursday, May 24, 2012 1:11 PM To: Adam Seeley ; softimage@listproc.autodesk.com Subject: Re: Split ice cloud into randomised collections. You could get the groups' name (from the multiple groups you have created) and set a custom data using set data node. Then your point cloud will inherit this data. Cheers. Regards, Chris Chia On 24 May, 2012, at 6:39 PM, Adam Seeley adam_see...@yahoo.commailto:adam_see...@yahoo.com wrote: Hi, Could be, trying not to be thick, but not sure how to mutually exclusive sets out of it. The Instance randomisation is nice and quick (and there). Does anybody know how to get the Instance ID of a particle? After setting random instance objects using multiple objects in a group, I'd like to be able to find out which particles relate to which instance so I can manipulate them. Thanks, adam. From: Vladimir Jankijevic vladi...@elefantstudios.chmailto:vladi...@elefantstudios.ch To: Adam Seeley adam_see...@yahoo.commailto:adam_see...@yahoo.com; softimage@listproc.autodesk.commailto:softimage@listproc.autodesk.com Sent: Thursday, 24 May 2012, 9:20 Subject: Re: Split ice cloud into randomised collections. the modulo node would be your friend then... vladimir On Thu, May 24, 2012 at 10:17 AM, Adam Seeley adam_see...@yahoo.commailto:adam_see...@yahoo.com wrote: Hi, Before I spend time sorting this one out on my short time scale, I wondered if someone had been there already. I'd like to be able to split my cloud into, say, 10 randomised sets. Pretty much the same way that instancing 10 objects works, but so I can define specific colours/shapes etc. within the cloud. Any handy compounds spring to mind? Thanks and hope to see a few faces next Tuesday at USer Group, Adam. -- --- Vladimir Jankijevic Technical Direction Elefant Studios AG Lessingstrasse 15 CH-8002 Zürich +41 44 500 48 20 www.elefantstudios.chhttp://www.elefantstudios.ch ---
softimage in fxguide
(sorry..the last email slipped out before adding a subject) Hi, Just to point out a great interview in fxguide featuring glassworks and their work on a tvspot using softimage and ice...nice stuff! http://www.fxguide.com/fxguidetv/fxguidetv-147-fmx-virtual-production/ later.. Rui www.ruisantos3d.com
still have issues with mail - sorry not very friday thread!
I unsubscribed, and re-subscribed with matt...@gmail.com - still not recieving any mail. Can send to the list ok. Any ideas? (will check the web archive for replies ;) matt -- www.matinai.com
Ice polymesh not retaining UV's when frozen.
Hi, question of the day... I've created an Ice Polymesh using the Create Copies From Polygon Mesh, using a particle cloud and some source Geo with a set of UV's. The UV's transfer over nicely to the duplicated version. When I freeze the Ice Polymsh, it loses the UV's. Can retain those UVs as a baked UV texture property? Thanks, Adam. From: Daniel H vfxc...@gmail.com To: softimage@listproc.autodesk.com Sent: Friday, 25 May 2012, 14:01 Subject: Re: Is the list still working? Anyone cut off from this list has been aggressively terminated via digital selection through the Web's new rogue intelligence program U-N-C-O-E-X-I-S-T. Daniel VFXM My country can bench press your country with one arm.
Re: Ice polymesh not retaining UV's when frozen.
It doesn't transfer the UVs to a cluster property, instead they get stored in an ICE vector attribute. Freezing has retained this attribute for me in the past. Ciaran On Fri, May 25, 2012 at 4:23 PM, Adam Seeley adam_see...@yahoo.com wrote: Hi, question of the day... I've created an Ice Polymesh using the Create Copies From Polygon Mesh, using a particle cloud and some source Geo with a set of UV's. The UV's transfer over nicely to the duplicated version. When I freeze the Ice Polymsh, it loses the UV's. Can retain those UVs as a baked UV texture property? Thanks, Adam. -- *From:* Daniel H vfxc...@gmail.com *To:* softimage@listproc.autodesk.com *Sent:* Friday, 25 May 2012, 14:01 *Subject:* Re: Is the list still working? Anyone cut off from this list has been aggressively terminated via digital selection through the Web's new rogue intelligence program U-N-C-O-E-X-I-S-T. Daniel VFXM My country can bench press your country with one arm.
RE: OT: hulk smash
I'm going to guess Jonas Thornqvist but not 100% sure. From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of David Saber Sent: Friday, May 25, 2012 12:41 PM To: softimage@listproc.autodesk.com Subject: Re: OT: hulk smash Is this your work Adrian? From: adrian wyermailto:adrian.w...@fluid-pictures.com Sent: Thursday, May 24, 2012 6:56 PM To: softimage@listproc.autodesk.commailto:softimage@listproc.autodesk.com Subject: OT: hulk smash 5k renders http://media.screened.com/uploads/0/1144/622571-hulk.jpg http://images4.wikia.nocookie.net/__cb20120507025617/marvelmovies/images/d/d0/TheAvengers_Hulk2.jpg you're welcome a Adrian Wyer Fluid Pictures 75-77 Margaret St. London W1W 8SY ++44(0) 207 580 0829 blocked::blocked::mailto:adrian.w...@fluid-pictures.com www.fluid-pictures.comblocked::blocked::http://www.fluid-pictures.com/ Fluid Pictures Limited is registered in England and Wales. Company number:5657815 VAT number: 872 6893 71
Re: Friday Flashback
thats hilarious On Fri, May 25, 2012 at 9:13 AM, Grahame Fuller grahame.ful...@autodesk.com wrote: XSI got a couple of things out of its development, including the Fold operator and the Drag drop models at cursor location preference.
Re: still have issues with mail - sorry not very friday thread!
One my friends and co-worker Renaud brought this to notice, his gmail is working but he is not on google+. So maybe all google accounts with google+ are having this issue, as I am on google+ On 25/05/2012 1:18 PM, Oscar Juarez wrote: I'm on gmail and it's working too On Fri, May 25, 2012 at 9:32 AM, Alok Gandhi alok.gan...@modusfx.com wrote: Oh I see, then it may be something else, personally my gmail account is not working for sure. On 25/05/2012 10:30 AM, Rob Chapman wrote: Hi, that would be some but not *all* gmail accounts. mine, for example is fine. have been able to see , send receive emails from Autodesk listserve and google groups archive. In fact there seems to be threads that I can see from softimage@listproc.Autodesk.com that do not appear on the google groups list. Are you sure its google to blame - last time similar happened with gmail account info being lost about a year ago there was a lot of traffic about it on the internets, there doesnt appear to be any concerning this recent outbreak...? am not saying it couldnt be google's fault though :) On 25 May 2012 15:13, Alok Gandhi alok.gan...@modusfx.com wrote: It seems that all gmail accounts have the same problems. Although non-gmail accounts are working fine. Some big update on the google might be causing this I guess. On 25/05/2012 10:07 AM, Matt Morris wrote: I unsubscribed, and re-subscribed with matt...@gmail.com - still not recieving any mail. Can send to the list ok. Any ideas? (will check the web archive for replies ;) matt -- www.matinai.com
RE: still have issues with mail - sorry not very friday thread!
Did you subscribe directly to softimage@listproc.autodesk.commailto:softimage@listproc.autodesk.com, or via the Google group? gray From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Alok Gandhi Sent: Friday, May 25, 2012 02:35 PM To: softimage@listproc.autodesk.com Subject: Re: still have issues with mail - sorry not very friday thread! One my friends and co-worker Renaud brought this to notice, his gmail is working but he is not on google+. So maybe all google accounts with google+ are having this issue, as I am on google+ [cid:image001.gif@01CD3A84.C93A55F0] On 25/05/2012 1:18 PM, Oscar Juarez wrote: I'm on gmail and it's working too On Fri, May 25, 2012 at 9:32 AM, Alok Gandhi alok.gan...@modusfx.commailto:alok.gan...@modusfx.com wrote: Oh I see, then it may be something else, personally my gmail account is not working for sure. [cid:image001.gif@01CD3A84.C93A55F0] On 25/05/2012 10:30 AM, Rob Chapman wrote: Hi, that would be some but not *all* gmail accounts. mine, for example is fine. have been able to see , send receive emails from Autodesk listserve and google groups archive. In fact there seems to be threads that I can see from softimage@listproc.Autodesk.commailto:softimage@listproc.Autodesk.com that do not appear on the google groups list. Are you sure its google to blame - last time similar happened with gmail account info being lost about a year ago there was a lot of traffic about it on the internets, there doesnt appear to be any concerning this recent outbreak...? am not saying it couldnt be google's fault though :) On 25 May 2012 15:13, Alok Gandhi alok.gan...@modusfx.commailto:alok.gan...@modusfx.com wrote: It seems that all gmail accounts have the same problems. Although non-gmail accounts are working fine. Some big update on the google might be causing this I guess. [cid:image001.gif@01CD3A84.C93A55F0] On 25/05/2012 10:07 AM, Matt Morris wrote: I unsubscribed, and re-subscribed with matt...@gmail.commailto:matt...@gmail.com - still not recieving any mail. Can send to the list ok. Any ideas? (will check the web archive for replies ;) matt -- www.matinai.comhttp://www.matinai.com attachment: winmail.dat
Re: still have issues with mail - sorry not very friday thread!
directly through softimage-requ...@listproc.autodesk.com. And for the last 2 years never had a problem. On 25/05/2012 2:43 PM, Grahame Fuller wrote: Did you subscribe directly to softimage@listproc.autodesk.commailto:softimage@listproc.autodesk.com, or via the Google group? gray From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Alok Gandhi Sent: Friday, May 25, 2012 02:35 PM To: softimage@listproc.autodesk.com Subject: Re: still have issues with mail - sorry not very friday thread! One my friends and co-worker Renaud brought this to notice, his gmail is working but he is not on google+. So maybe all google accounts with google+ are having this issue, as I am on google+ [cid:image001.gif@01CD3A84.C93A55F0] On 25/05/2012 1:18 PM, Oscar Juarez wrote: I'm on gmail and it's working too On Fri, May 25, 2012 at 9:32 AM, Alok Gandhi alok.gan...@modusfx.commailto:alok.gan...@modusfx.com wrote: Oh I see, then it may be something else, personally my gmail account is not working for sure. [cid:image001.gif@01CD3A84.C93A55F0] On 25/05/2012 10:30 AM, Rob Chapman wrote: Hi, that would be some but not *all* gmail accounts. mine, for example is fine. have been able to see , send receive emails from Autodesk listserve and google groups archive. In fact there seems to be threads that I can see from softimage@listproc.Autodesk.commailto:softimage@listproc.Autodesk.com that do not appear on the google groups list. Are you sure its google to blame - last time similar happened with gmail account info being lost about a year ago there was a lot of traffic about it on the internets, there doesnt appear to be any concerning this recent outbreak...? am not saying it couldnt be google's fault though :) On 25 May 2012 15:13, Alok Gandhi alok.gan...@modusfx.commailto:alok.gan...@modusfx.com wrote: It seems that all gmail accounts have the same problems. Although non-gmail accounts are working fine. Some big update on the google might be causing this I guess. [cid:image001.gif@01CD3A84.C93A55F0] On 25/05/2012 10:07 AM, Matt Morris wrote: I unsubscribed, and re-subscribed with matt...@gmail.commailto:matt...@gmail.com - still not recieving any mail. Can send to the list ok. Any ideas? (will check the web archive for replies ;) matt -- www.matinai.comhttp://www.matinai.com
Fixed my email ...
FYI - I simply unsubscribed/re-subscribed my work email and things seem to be working fine again. Dana L. Smith Technical Infrastructure Management SAS (919) 531-4116 dana.sm...@sas.commailto:dana.sm...@sas.com http://www.sas.comhttp://www.sas.com/
RE: still have issues with mail - sorry not very friday thread!
I had problems not receiving mails a few weeks ago and I'm also receiving directly from the listserver since 2001. Thought it was related to a newer version of a recently installed version of outlook but a couple days later all went back to normal. And I didn't change a thing. Maybe we should all sit back and take an outage from our 3d work a few days? Hehe From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Alok Gandhi Sent: Friday, May 25, 2012 20:56 To: softimage@listproc.autodesk.com Subject: Re: still have issues with mail - sorry not very friday thread! directly through softimage-requ...@listproc.autodesk.com. And for the last 2 years never had a problem. On 25/05/2012 2:43 PM, Grahame Fuller wrote: Did you subscribe directly to softimage@listproc.autodesk.com mailto:softimage@listproc.autodesk.com mailto:softimage@listproc.autodesk.com, or via the Google group? gray From: softimage-boun...@listproc.autodesk.com [mailto:softimage-boun...@listproc.autodesk.com] On Behalf Of Alok Gandhi Sent: Friday, May 25, 2012 02:35 PM To: softimage@listproc.autodesk.com Subject: Re: still have issues with mail - sorry not very friday thread! One my friends and co-worker Renaud brought this to notice, his gmail is working but he is not on google+. So maybe all google accounts with google+ are having this issue, as I am on google+ [cid:image001.gif@01CD3A84.C93A55F0] On 25/05/2012 1:18 PM, Oscar Juarez wrote: I'm on gmail and it's working too On Fri, May 25, 2012 at 9:32 AM, Alok Gandhi alok.gan...@modusfx.com mailto:alok.gan...@modusfx.com mailto:alok.gan...@modusfx.com wrote: Oh I see, then it may be something else, personally my gmail account is not working for sure. [cid:image001.gif@01CD3A84.C93A55F0] On 25/05/2012 10:30 AM, Rob Chapman wrote: Hi, that would be some but not *all* gmail accounts. mine, for example is fine. have been able to see , send receive emails from Autodesk listserve and google groups archive. In fact there seems to be threads that I can see from softimage@listproc.Autodesk.com mailto:softimage@listproc.Autodesk.com mailto:softimage@listproc.Autodesk.com that do not appear on the google groups list. Are you sure its google to blame - last time similar happened with gmail account info being lost about a year ago there was a lot of traffic about it on the internets, there doesnt appear to be any concerning this recent outbreak...? am not saying it couldnt be google's fault though :) On 25 May 2012 15:13, Alok Gandhi alok.gan...@modusfx.com mailto:alok.gan...@modusfx.com mailto:alok.gan...@modusfx.com wrote: It seems that all gmail accounts have the same problems. Although non-gmail accounts are working fine. Some big update on the google might be causing this I guess. [cid:image001.gif@01CD3A84.C93A55F0] On 25/05/2012 10:07 AM, Matt Morris wrote: I unsubscribed, and re-subscribed with matt...@gmail.com mailto:matt...@gmail.com mailto:matt...@gmail.com - still not recieving any mail. Can send to the list ok. Any ideas? (will check the web archive for replies ;) matt -- www.matinai.com http://www.matinai.com http://www.matinai.com image001.gif
Re: OT: Image Based Modeling
I forgot to add a link for the open source image based modeling software called insight3D. This one is also geared toward architectural modeling, but could be used for other purposes. http://insight3d.sourceforge.net/ On Fri, May 25, 2012 at 11:47 AM, Byron Nash byronn...@gmail.com wrote: At SIGGRAPH 2011 there was a panel where one of the larger houses(Weta, Sony?) showed some very nice image based modeling solutions off. They had an array of cameras that took around 300 stills of an object and then they were able to generate very dense meshes with albedo maps. Does anyone remember the name of that or is it even a commercial product? I looked back over my notes and couldn't find a name anywhere. Thanks, Byron -- Best Regards, * Stephen P. Davidson** **(954) 552-7956 *sdavid...@3danimationmagic.com http://www.3danimationmagic.com My Website is *GREEN*, Is yours? [image: affiliate_link] http://www.fatcow.com/join/index.bml?AffID=626478
Re: OT: Image Based Modeling
Paul Smith is using Agisoft Photoscan in this tut https://vimeo.com/42633249 http://www.youtube.com/watch?v=Qq4BUrEBvhA Le 25/05/2012 23:29, Stephen Davidson a crit: Be aware that this app does not handle shiny or transparent object well. Nothing that a can of flat grey spray paint can't fix. :) This app is very good, but I have been looking for a decent image based modeling program for quite some time. They all seem to be more aimed atArchitecturalmodeling. 3DSOM http://www.3dsom.com/ is fairly good,althoughit has issues with undercuts. This is because it uses a series ofsilhouettes, of the object,to create the mesh. Photomodeler http://www.photomodeler.com/ is also very good. You will spend a lot of time calibrating your camera. I find it is good to make general shapes as reference, but any detailed modeling is too labor intensive. I still find that 3 or 4 locked down camera views with rotoscoped images, where the Softimage camera matches the photo camera is the best method for product modeling. Maybe it is because I am so used to the modeling tools in Softimage. I use a printed grid scale, on the floor, to help with the scale references. I am always looking for new methods to help speed up the process, though. On Fri, May 25, 2012 at 2:07 PM, Alok Gandhi alok.gan...@modusfx.com wrote: Don't know about SIGGRAPH one, but here is something similar: http://www.123dapp.com/catch On 25/05/2012 11:47 AM, Byron Nash wrote: At SIGGRAPH 2011 there was a panel where one of the larger houses(Weta, Sony?) showed some very nice image based modeling solutions off. They had an array of cameras that took around 300 stills of an object and then they were able to generate very dense meshes with albedo maps. Does anyone remember the name of that or is it even a commercial product? I looked back over my notes and couldn't find a name anywhere. Thanks, Byron -- Best Regards, Stephen P. Davidson (954) 552-7956 sdavid...@3danimationmagic.com My Website is GREEN, Is yours?
Re: OT: Image Based Modeling
One last thing If you are going to model from a series of photos, you will need to deal with camera lens distortions in the photos that you use for reference. here is a good tutorial on this: http://www.youtube.com/watch?v=-xZFjo1aIQc On Fri, May 25, 2012 at 11:47 AM, Byron Nash byronn...@gmail.com wrote: At SIGGRAPH 2011 there was a panel where one of the larger houses(Weta, Sony?) showed some very nice image based modeling solutions off. They had an array of cameras that took around 300 stills of an object and then they were able to generate very dense meshes with albedo maps. Does anyone remember the name of that or is it even a commercial product? I looked back over my notes and couldn't find a name anywhere. Thanks, Byron -- Best Regards, * Stephen P. Davidson** **(954) 552-7956 *sdavid...@3danimationmagic.com http://www.3danimationmagic.com My Website is *GREEN*, Is yours? [image: affiliate_link] http://www.fatcow.com/join/index.bml?AffID=626478
Re: still have issues with mail - sorry not very friday thread!
I have Google+ and it's working On Fri, May 25, 2012 at 1:34 PM, Alok Gandhi alok.gan...@modusfx.comwrote: One my friends and co-worker Renaud brought this to notice, his gmail is working but he is not on google+. So maybe all google accounts with google+ are having this issue, as I am on google+ On 25/05/2012 1:18 PM, Oscar Juarez wrote: I'm on gmail and it's working too On Fri, May 25, 2012 at 9:32 AM, Alok Gandhi alok.gan...@modusfx.comwrote: Oh I see, then it may be something else, personally my gmail account is not working for sure. On 25/05/2012 10:30 AM, Rob Chapman wrote: Hi, that would be some but not *all* gmail accounts. mine, for example is fine. have been able to see , send receive emails from Autodesk listserve and google groups archive. In fact there seems to be threads that I can see from softimage@listproc.Autodesk.com that do not appear on the google groups list. Are you sure its google to blame - last time similar happened with gmail account info being lost about a year ago there was a lot of traffic about it on the internets, there doesnt appear to be any concerning this recent outbreak...? am not saying it couldnt be google's fault though :) On 25 May 2012 15:13, Alok Gandhi alok.gan...@modusfx.com wrote: It seems that all gmail accounts have the same problems. Although non-gmail accounts are working fine. Some big update on the google might be causing this I guess. On 25/05/2012 10:07 AM, Matt Morris wrote: I unsubscribed, and re-subscribed with matt...@gmail.com - still not recieving any mail. Can send to the list ok. Any ideas? (will check the web archive for replies ;) matt -- www.matinai.com image/gifAlok_Signature_email_.gifimage/gif
Re: test, maybe a solution for those not receiving?
I unsubscribed and resubscribed my gmail account and still have no luck. Can the AD folks check the mail server please? Even if we can just whittle it down to being a problem with Google, not the AD server that would be great. Eric Thivierge http://www.ethivierge.com
