Re: RE: [pfSense Support] ISO problems ... still
I found that the 0.76.4.iso still hangs (Waiting for Backend on ANSI screen) EVEN when the CD HDD ARE on the same channel (ie: primary). I did successfully do an upgrade from 0.74.8 0.77 this morning and all went fine. I haven't seen a newer version of the iso (0.76.4 has been up on the mirrors for a couple of days now).--David L. StroutEngineering Systems Plus, LLC- Original Message -Subject: RE: [pfSense Support] ISO problems ... stillFrom: [EMAIL PROTECTED]To: [EMAIL PROTECTED]Date: 08-16-2005 9:28 pmNope, still a no go unless the CDROM is on the same channel..! . Dimitri RodisIntegrita Systems LLC-Original Message-From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 16, 2005 9:12 AMTo: Dimitri RodisCc: Wesley Joyce; support@pfsense.comSubject: Re: [pfSense Support] ISO problems ... stillTry the latest version that I posted last night.On 8/16/05, Dimitri Rodis [EMAIL PROTECTED] wrote: Any news on the issue with the installer? (Moving the CDROM to be on the same channel as the hard drive, etc.) Dimitri Rodis Integrita Systems LLC -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 3:05 PM To: Dimitri Rodis<br! /> Cc: Wesley Joyce; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still On 8/11/05, Dimitri Rodis [EMAIL PROTECTED] wrote: Yup, that did it. All I did was move the CDROM from Secondary Master to Primary Slave and the install went right thru. This was on 0.73.8. Okay thanks. Let me see if this can help us narrow down the problem. Scott-To unsubscribe, e-mail: [EMAIL PROTECTED] For additionalcommands, e-mail: [EMAIL PROTECTED]-To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
Nope, still a no go unless the CDROM is on the same channel... Dimitri Rodis Integrita Systems LLC -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Tuesday, August 16, 2005 9:12 AM To: Dimitri Rodis Cc: Wesley Joyce; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still Try the latest version that I posted last night. On 8/16/05, Dimitri Rodis [EMAIL PROTECTED] wrote: Any news on the issue with the installer? (Moving the CDROM to be on the same channel as the hard drive, etc.) Dimitri Rodis Integrita Systems LLC -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 3:05 PM To: Dimitri Rodis Cc: Wesley Joyce; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still On 8/11/05, Dimitri Rodis [EMAIL PROTECTED] wrote: Yup, that did it. All I did was move the CDROM from Secondary Master to Primary Slave and the install went right thru. This was on 0.73.8. Okay thanks. Let me see if this can help us narrow down the problem. Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error?
I am now only getting as far as 63% during the install when the CDROM is on the secondary bus. This is using pfSense-LiveCD-0.75.1 which for some strange reason still boots and display 0.75 as the version. Should I download this from a different mirror? -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Friday, August 12, 2005 12:27 AM To: Wesley Joyce Cc: David Strout; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still on 0.75 0.75.1 is making its way to a mirror near you to fix a Lua bug. Scott On 8/12/05, Wesley Joyce [EMAIL PROTECTED] wrote: You're kidding right!? I was able to get it to work with your last scenario and 0.74.8. I will be trying 0.75 today (Friday) H.. how about trying a new IDE cable. From: David Strout [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 10:08 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; support@pfsense.com Subject: [pfSense Support] ISO problems ... still on 0.75 I can't say the same here .. I've tried the following .. pri master = 10GB HDD pri slave = empty sec master = empty sec slave = Samsung CD-ROM NOT WORKING !! Still hangs on the Waiting for Backend Next I tried . pri master = 10GB HDD pri slave = empty sec master = Samsung CD-ROM sec slave = empty NOT WORKING !! Same results Lastly I tried . pri master = 10GB HDD pri slave = Samsung CD-ROM sec master slave = empty NOT WORKING !! Same results -- David L. Strout Engineering Systems Plus, LLC - Original Message - Subject: Re: [pfSense Support] ISO problems ... still From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: 08-11-2005 8:02 pm Ok, I can second Dimitri. Moving the CD from Secondary Master to Primary Slave did the trick for me as well. On both pfSense on DesktopBSD. Haven't done FreeBSD or PCBSD yet but this looks promising. Dimitri, what hardware are you running? I'm... MSI K7T Pro2 Duron 1.2 256 - PC2700 Maxtor 6L040J2 (40Gig) ATI AIO Pro128 Samsung 52x CDROM On 8/11/05, Scott Ullrich [EMAIL PROTECTED] wrote: On 8/11/05, Dimitri Rodis [EMAIL PROTECTED] wrote: Yup, that did it. All I did was move the CDROM from Secondary Master to Primary Slave and the install went right thru. This was on 0.73.8. Okay thanks. ! Let me see if this can help us narrow down the problem. Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error?
On 8/12/05, Wesley Joyce [EMAIL PROTECTED] wrote: I am now only getting as far as 63% during the install when the CDROM is on the secondary bus. This is using pfSense-LiveCD-0.75.1 which for some strange reason still boots and display 0.75 as the version. Should I download this from a different mirror? It was only a installer fix so I didnt bump the system version. That is normal. What do you mean getting as far as 63%? What happens? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error?
During the cpdup command processing after the partitioning, formatting, it faults at the 63% progress indicator during the installation. -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Friday, August 12, 2005 11:02 AM To: Wesley Joyce Cc: support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error? On 8/12/05, Wesley Joyce [EMAIL PROTECTED] wrote: I am now only getting as far as 63% during the install when the CDROM is on the secondary bus. This is using pfSense-LiveCD-0.75.1 which for some strange reason still boots and display 0.75 as the version. Should I download this from a different mirror? It was only a installer fix so I didnt bump the system version. That is normal. What do you mean getting as far as 63%? What happens? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error?
Again, I need more info. What faults? FreeBSD? The backend? The installer front end? Scott -- Forwarded message -- From: Wesley Joyce [EMAIL PROTECTED] Date: Aug 12, 2005 12:07 PM Subject: RE: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error? To: Scott Ullrich [EMAIL PROTECTED] Cc: support@pfsense.com During the cpdup command processing after the partitioning, formatting, it faults at the 63% progress indicator during the installation. -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Friday, August 12, 2005 11:02 AM To: Wesley Joyce Cc: support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still on 0.75 / 0.75.1 iso version error? On 8/12/05, Wesley Joyce [EMAIL PROTECTED] wrote: I am now only getting as far as 63% during the install when the CDROM is on the secondary bus. This is using pfSense-LiveCD-0.75.1 which for some strange reason still boots and display 0.75 as the version. Should I download this from a different mirror? It was only a installer fix so I didnt bump the system version. That is normal. What do you mean getting as far as 63%? What happens? - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade solution' of installing 0.68.x and upgrading from there. -Original Message- From: William Pflaumer [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 7:11 AM To: David Strout Cc: support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly) That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have specific errors, but I tried about 6 different Live CDs versions. I tried Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using Monowall since pb27) but I just cannot get this SOB to install. The feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch the /FreeSBIE/scripts/install.sh script it hangs on the Waiting for Backend ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config. I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ideas ? -- David L. Strout Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
We are working on this. Everyone please be patient. The installer is a tricky piece to get right for such a broad range of hardware and such. Scott On 8/11/05, Wesley Joyce [EMAIL PROTECTED] wrote: I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade solution' of installing 0.68.x and upgrading from there. -Original Message- From: William Pflaumer [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 7:11 AM To: David Strout Cc: support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly) That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have specific errors, but I tried about 6 different Live CDs versions. I tried Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using Monowall since pb27) but I just cannot get this SOB to install. The feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch the /FreeSBIE/scripts/install.sh script it hangs on the Waiting for Backend ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config. I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ideas ? -- David L. Strout Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
All, are you using SCSI by chance? Scott On 8/11/05, Wesley Joyce [EMAIL PROTECTED] wrote: I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade solution' of installing 0.68.x and upgrading from there. -Original Message- From: William Pflaumer [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 7:11 AM To: David Strout Cc: support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly) That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have specific errors, but I tried about 6 different Live CDs versions. I tried Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using Monowall since pb27) but I just cannot get this SOB to install. The feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch the /FreeSBIE/scripts/install.sh script it hangs on the Waiting for Backend ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config. I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ideas ? -- David L. Strout Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
I am glad that the issue is being looked at. Let me know what you need from me in terms of errors. Thanks. -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 2:01 PM To: Wesley Joyce Cc: William Pflaumer; David Strout; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still We are working on this. Everyone please be patient. The installer is a tricky piece to get right for such a broad range of hardware and such. Scott On 8/11/05, Wesley Joyce [EMAIL PROTECTED] wrote: I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade solution' of installing 0.68.x and upgrading from there. -Original Message- From: William Pflaumer [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 7:11 AM To: David Strout Cc: support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly) That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have specific errors, but I tried about 6 different Live CDs versions. I tried Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using Monowall since pb27) but I just cannot get this SOB to install. The feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch the /FreeSBIE/scripts/install.sh script it hangs on the Waiting for Backend ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config. I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ideas ? -- David L. Strout Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: Re: [pfSense Support] ISO problems ... still
There is a SCSI PCI adapter in the GX260 but I have tried installing the ISO wo/ it installed ... saddly enough same results.--David L. StroutEngineering Systems Plus, LLC- Original Message -Subject: Re: [pfSense Support] ISO problems ... stillFrom: [EMAIL PROTECTED]To: [EMAIL PROTECTED]Date: 08-11-2005 2:59 pmWe're hot on the trail now.I bet your using SCSI?ScottOn 8/11/05, David Strout [EMAIL PROTECTED] wrote: I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and found little or not relavant info, but I did ! a couple of Googles and found some pertinant info ... seems there is some known issues w/ installing *BSDs w/ the CD in a different IDE channel than the HDD that you are installing to. There are also lots of hits on disabling the APM (Power Mgmt.) . I have tried and tried to get the newest ISO (0.74.6) to work w/ many many different hardware configurations, but to no avail !!! Naything I can do to contribute to getting this worked out let me know I have a couple of test platforms to work w/ and a pretty outfitted lab at my disposl to test in. I did notice that unless you install fresh from the ISO some of the fixes don't apply correctly namely the delete icon on the IPSec:SPD page, and also I noticed that the fix for the adding DHCP only fixed itself (linking to the edit static mapping page) after up! grad! ing to 0.74.8 today. GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance ??? -- David L. Strout Engineering Systems Plus, LLC - Original Message - Subject: Re: [pfSense Support] ISO problems ... still From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: 08-11-2005 2:01 pm We are working on this. Everyone please be patient. The installer is a tricky piece to get right for such a broad range of hardware and such. Scott On 8/11/05, Wesley Joyce [EMAIL PROTECTED] wrote: I'm in the same boat as well on Dell GX 110's. I have fol! lowed the 'upgrade solution' of installing 0.68.x and upgrading from there. -Original Message- From: William Pflaumer [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 7:11 AM To: David Strout Cc: support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly)! That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have speci! fic errors, but I tried about 6 different Live CDs versions. I triedBios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. ! Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using ! Monowall since pb27) but I just cannot get this SOB to install. The feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] &! gt; Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch t! he /FreeSBIE/scripts/install.sh script it hangs on the Waiting for Backend ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config.! I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ! ideas ? -- David L. Strout Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTE
Re: Re: [pfSense Support] ISO problems ... still
I just tried a fresh 0.74.6 install after pulling the AHA2940 SCSI adapter out same results. Hangs on the Waiting for Backend ANSI screen.--David L. StroutEngineering Systems Plus, LLC- Original Message -Subject: Re: [pfSense Support] ISO problems ... stillFrom: [EMAIL PROTECTED]To: [EMAIL PROTECTED]Date: 08-11-2005 2:54 pmAll, are you using SCSI by chance?ScottOn 8/11/05, Wesley Joyce [EMAIL PROTECTED] wrote: I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade solution' of installing 0.68.x and upgrading ! from there. -Original Message- From: William Pflaumer [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 7:11 AM To: David Strout Cc: support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly) That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have specific errors, but I tried about 6 different Live CDs versions. I tried Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using Monowall since pb27) but I just cannot get this SOB to install. The! t; feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch the /FreeSBIE/scripts/install.sh script it hangs! on the Waiting for Backend ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config. I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ideas ? -- David L. Strout! Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] -To unsubscribe, e-mail: [EMAIL PROTECTED]For additional commands, e-mail: [EMAIL PROTECTED]
Re: Re: [pfSense Support] ISO problems ... still
Try running: /usr/local/bin/lua50c51 /usr/local/share/dfuibe_lua/main.lua \ dir.root=/FreeSBIE/ \ option.booted_from_install_media=true ... From a shell prompt. Do you get a lua error? Scott On 8/11/05, David Strout [EMAIL PROTECTED] wrote: I just tried a fresh 0.74.6 install after pulling the AHA2940 SCSI adapter out same results. Hangs on the Waiting for Backend ANSI screen. -- David L. Strout Engineering Systems Plus, LLC - Original Message - Subject: Re: [pfSense Support] ISO problems ... still From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: 08-11-2005 2:54 pm All, are you using SCSI by chance? Scott On 8/11/05, Wesley Joyce [EMAIL PROTECTED] wrote: I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade solution' of installing 0.68.x and upgrading ! from there. -Original Message- From: William Pflaumer [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 7:11 AM To: David Strout Cc: support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly) That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have specific errors, but I tried about 6 different Live CDs versions. I tried Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using Monowall since pb27) but I just cannot get this SOB to install. The g! t; feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch the /FreeSBIE/scripts/install.sh script it hangs! on the Waiting for Backend ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config. I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ideas ? -- David L. Strout! Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
I am going to try the latest ISO with a GX110 using the IDE HD and then SCSI and let you guys know. -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 3:00 PM To: David Strout Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still We're hot on the trail now.I bet your using SCSI? Scott On 8/11/05, David Strout [EMAIL PROTECTED] wrote: I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and found little or not relavant info, but I did a couple of Googles and found some pertinant info ... seems there is some known issues w/ installing *BSDs w/ the CD in a different IDE channel than the HDD that you are installing to. There are also lots of hits on disabling the APM (Power Mgmt.) . I have tried and tried to get the newest ISO (0.74.6) to work w/ many many different hardware configurations, but to no avail !!! Naything I can do to contribute to getting this worked out let me know I have a couple of test platforms to work w/ and a pretty outfitted lab at my disposl to test in. I did notice that unless you install fresh from the ISO some of the fixes don't apply correctly namely the delete icon on the IPSec:SPD page, and also I noticed that the fix for the adding DHCP only fixed itself (linking to the edit static mapping page) after up! grading to 0.74.8 today. GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance ??? -- David L. Strout Engineering Systems Plus, LLC - Original Message - Subject: Re: [pfSense Support] ISO problems ... still From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: 08-11-2005 2:01 pm We are working on this. Everyone please be patient. The installer is a tricky piece to get right for such a broad range of hardware and such. Scott On 8/11/05, Wesley Joyce [EMAIL PROTECTED] wrote: I'm in the same boat as well on Dell GX 110's. I have fol! lowed the 'upgrade solution' of installing 0.68.x and upgrading from there. -Original Message- From: William Pflaumer [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 7:11 AM To: David Strout Cc: support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly) That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have speci! fic errors, but I tried about 6 different Live CDs versions. I tried Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using ! Monowall since pb27) but I just cannot get this SOB to install. The feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch t! he /FreeSBIE/scripts/install.sh script it hangs on the Waiting for Backend ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config. I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ! ideas ? -- David
Re: [pfSense Support] ISO problems ... still
If it fails it would also be helpful to try running: /usr/local/bin/lua50c51 /usr/local/share/dfuibe_lua/main.lua \ dir.root=/FreeSBIE/ \ option.booted_from_install_media=true ... From a shell prompt to see if any lua errors kick up. Scott On 8/11/05, Wesley Joyce [EMAIL PROTECTED] wrote: I am going to try the latest ISO with a GX110 using the IDE HD and then SCSI and let you guys know. -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 3:00 PM To: David Strout Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still We're hot on the trail now.I bet your using SCSI? Scott On 8/11/05, David Strout [EMAIL PROTECTED] wrote: I did a little digging on the FreeBSD, FreeSBIE and DragonFLY sites and found little or not relavant info, but I did a couple of Googles and found some pertinant info ... seems there is some known issues w/ installing *BSDs w/ the CD in a different IDE channel than the HDD that you are installing to. There are also lots of hits on disabling the APM (Power Mgmt.) . I have tried and tried to get the newest ISO (0.74.6) to work w/ many many different hardware configurations, but to no avail !!! Naything I can do to contribute to getting this worked out let me know I have a couple of test platforms to work w/ and a pretty outfitted lab at my disposl to test in. I did notice that unless you install fresh from the ISO some of the fixes don't apply correctly namely the delete icon on the IPSec:SPD page, and also I noticed that the fix for the adding DHCP only fixed itself (linking to the edit static mapping page) after up! grading to 0.74.8 today. GREAT JOB / AWESOME PRODUCT ... how can I be of more assistance ??? -- David L. Strout Engineering Systems Plus, LLC - Original Message - Subject: Re: [pfSense Support] ISO problems ... still From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Date: 08-11-2005 2:01 pm We are working on this. Everyone please be patient. The installer is a tricky piece to get right for such a broad range of hardware and such. Scott On 8/11/05, Wesley Joyce [EMAIL PROTECTED] wrote: I'm in the same boat as well on Dell GX 110's. I have fol! lowed the 'upgrade solution' of installing 0.68.x and upgrading from there. -Original Message- From: William Pflaumer [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 7:11 AM To: David Strout Cc: support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly) That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have speci! fic errors, but I tried about 6 different Live CDs versions. I tried Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using ! Monowall since pb27) but I just cannot get this SOB to install. The feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch t! he /FreeSBIE/scripts/install.sh script it hangs on the Waiting for Backend ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot
Re: [pfSense Support] ISO problems ... still
On 8/11/05, Kerry Schrantz [EMAIL PROTECTED] wrote: David, You are definately on to something with the IDE channels. I have PFsense running just fine on my production box (Compaq) but I have been having a heck of a time getting it installed on a particular test machine (white box). I then started playing with FreeBSD, PC-BSD and DesktopBSD and none of them would install on my machine so I figured it was my box and left it alone for a while. Now that you mentioned it the CD is on the secondary IDE channel and the HD is on the primary channel. I'm gonna play tonight and see. I'll keep the list updated. Many people I know that build PC's always set the HD's on the primary channel and the CD' on the secondary. might be a common thing All the boxes I've tried have the HD in primary and CD on secondary and I haven't had issues. Most PC's are setup that way, so I think we'd be seeing a LOT more issues if that was always the case. Especially with FreeBSD, given the number of installs out there. I've installed dozens of different FreeBSD systems with HD on primary and CD on secondary with no issues. If you see the same issues with DesktopBSD, FreeSBIE, DragonFly, and pfsense, that's understandable as they all use the BSD Installer. When you throw FreeBSD into the mix, it starts to make a lot less sense. Those using Dell systems, do you have the latest BIOS on them? On older Dell systems I've had some weird problems with FreeBSD due to BIOS bugs. An upgrade to the latest BIOS resolved them. there's obviously still something else going on here, but that's a good thing to do in the mean time. ;) -cmb - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
RE: [pfSense Support] ISO problems ... still
Yup, that did it. All I did was move the CDROM from Secondary Master to Primary Slave and the install went right thru. This was on 0.73.8. Dimitri Rodis Integrita Systems LLC -Original Message- From: Scott Ullrich [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 2:55 PM To: Dimitri Rodis Cc: Wesley Joyce; support@pfsense.com Subject: Re: [pfSense Support] ISO problems ... still On 8/11/05, Dimitri Rodis [EMAIL PROTECTED] wrote: Maybe this is the problem with Virtual Server 2005 SP0 as well? The default is to have the CDROM virtual device as the secondary master... Worth a shot! Scott - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
Re: [pfSense Support] ISO problems ... still
Hrm..I've got a GX110 sitting on my desk here that I installed FreeBSD on just fine. If I can dig up another HD, I'll try the install on it. --Bill On 8/11/05, Wesley Joyce [EMAIL PROTECTED] wrote: I'm in the same boat as well on Dell GX 110's. I have followed the 'upgrade solution' of installing 0.68.x and upgrading from there. -Original Message- From: William Pflaumer [mailto:[EMAIL PROTECTED] Sent: Thursday, August 11, 2005 7:11 AM To: David Strout Cc: support@pfsense.com Subject: RE: [pfSense Support] ISO problems ... still David and List, I,too have not been able to do a harddrive install on my Dell Dimension XPS R300 since V 0.63 or so.(Last version that the installer functioned properly) That version had a bug with DHCP Client on the WAN Interface. I get Kernel Page Faults about 50% of the install will all later LiveCDs. I don't have specific errors, but I tried about 6 different Live CDs versions. I tried Bios tweaks (NO sound, NO power Management, NO USB), different memory (Ran Extensive memory tests),different HD,CDROM Drives, Use known good 3Com 3c905b from my Monowall PC. As a New Version comes out and fails to install, I try different things (place HD and CDROM Drive on the Same IDE Channel or delete the Partition with DELPART), the list goes on and on. I tried the install on a Toshiba 300mhz Celeron and I get ATA IDENTITY issues. Someone will probably suggest install that earlier version ( I believe it was 0.63) and do a manual update from there, but the way this product is evolving that idea probable will not work. I really like this firewall (been using Monowall since pb27) but I just cannot get this SOB to install. The feature I am waiting to see is DANSGUARDIAN WebFilter with Squid Transparent Proxy. I can post the specific errors that I receive if need be (no time to do it now) Thanks for this great Product, Bill -Original Message- From: David Strout [mailto:[EMAIL PROTECTED] Sent: Wednesday, August 10, 2005 12:59 PM To: support@pfsense.com Subject: [pfSense Support] ISO problems ... still Anyone, I have tried burning all of the version 0.73.x ISOs, and still the problem of when you launch the /FreeSBIE/scripts/install.sh script it hangs on the Waiting for Backend ANSI screen. Additionally, a couple of mesages pop up on the bottom of the screen ... xl0 link changed state to DOWN xl0 link tate changed to UP. BTW ... xl0 is configured for the WAN interface on the ISO boot up and pre-config. I'm at a loss ... tried a few BIOS tweaks and nothing seems to help. I'm wondering if anyone else is experiencing the same symptoms. BTW2 ... tried two different PC's a Dell GX260 a generic PC running an AMD Athelon 700Mhz I have had no problems w/ prior versions (0.68.x), but this issue crept up in/or about the 0.73.0 version. Any ideas ? -- David L. Strout Engineering Systems Plus, LLC - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]