Hi,
1. Do you see the image degradation and image dimensions changes in the web
interface after the parameters are applied? Do images keep refreshing there
(or check mjpeg stream)?
Also, check http://192.168.0.9:2323/meta - refresh the page a few times and
check if the frame counters are updating?
2. In your log I see fps was 2.5.
Was autoexposure running?
Best regards,
Oleg Dzhimiev
Electronics Engineer
phone: +1 801 783 x124
Elphel, Inc.
On Fri, Jul 31, 2020 at 10:44 AM Daniele Forsi
wrote:
> Hello,
>
> when I change the parameters DCM_HOR and DCM_VERT the stream stops and the
> str daemon can't be stopped with Ctrl-C or kill -KILL and I need to reboot
> the board (the web server and ssh server are still working).
> I have set those parameters to 2, 3 and 4 using the web interface.
>
> This happens both if str is not running and when it is running , in this
> case the last lines printed are:
>
> streamer.cpp: handler: 366: sensor port: 0 event: running= 0 streamer.cpp:
> update_settings: 131: sensor port: 0 update_settings
> video.cpp: getFramePars: 285: sensor port: 0 before=0
> metadata_start=46106528
> video.cpp: getFramePars: 285: sensor port: 0 before=0
> metadata_start=45742816
> video.cpp: get_current_desc: 350: sensor port: 0 fps=2.5
> Socket::poll()...
> socket.fd == 8; 9;
> revents == 0; POLLIN == 1
> revents == 0; POLLIN == 1
> streamer.cpp: handler: 366: sensor port: 0 event: running= 0 streamer.cpp:
> update_settings: 131: sensor port: 0 update_settings
>
>
> after a couple of seconds another line is printed:
>
> video.cpp: getFramePars: 285: sensor port: 0 before=0
> metadata_start=41742464
>
> and then nothing more.
>
> How can we debug this situation?
>
> thanks you
> Daniele Forsi
>
>
>
> ___
> Support-list mailing list
> Support-list@support.elphel.com
> http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
___
Support-list mailing list
Support-list@support.elphel.com
http://support.elphel.com/mailman/listinfo/support-list_support.elphel.com
