As the target server only receives already dedupped data it makes sense
their will be no or barely anything to be dedupped.
Regards,
Karel
On Mon, 8 Jul 2019 at 08:16, Stefan Folkerts
wrote:
> Hi all,
>
> I'm seeing something very strange at a customer site that has two Spectrum
> Protect
Hi,
Not being a network guru myself but I recall having 2 interfaces in the same
subnet even with different IP addresses is bad. On paper it looks all good,
as you define multiple addresses and tell the software which one to use but
in reality networks work on MAC level and TCP is just a
Hi,
Start with the basics, OS tools like ping. You probably have no static route
to this new/seperate network.
Kind regards,
Karel
-Oorspronkelijk bericht-
Van: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Namens Bo Nielsen
Verzonden: donderdag 27 juli 2017 11:10
Aan:
t
10 or so days after a reboot.
Never did get to the bottom of why, but rest assured you are not going mad.
Regards
Steve
Steven Harris
TSM Admin/Consultant
Canberra Australia
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Karel Bos
Sent:
2.
-Rick
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Karel Bos
Sent: Thursday, February 02, 2017 6:43 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] DB2 back-up issues on Windows
Hi,
Every day I have to restart DB2 (sometimes multiple
Hi,
Every day I have to restart DB2 (sometimes multiple times) due to backups
stop working. The DB2 database is doing log file and normal backups to TSM
and the backups stop working after the following couple of errors:
31.01.2017 10:48:04 instrStart: Unable to get write file lock or report
Would expect not as the whole point of the active data pool was having active
verslons on disk and inactive data on cheaper tape. Container is disk only and
dedupe needs repeating blocks of data to be effective.
K
> Op 11 jan. 2017 om 20:09 heeft David Ehresman
Those ddl files should have beem installed by ba client install but wont.
Known bug will be fixed. Support page is up and local fix points to sub
folder of baclient unpack dir to run the needed setup manually.
Op 3 nov. 2016 21:25 schreef "Shawn DREW" :
> I have run
Data in filespaces gets expired. Filespaces by itself will not get removed
automaticly.
Op 3 okt. 2016 19:32 schreef "David Ehresman" :
> >q copyg it-vme active standard
>
>
>
> PolicyPolicyMgmt Copy Version- Version- Retain Retain
>
> Domain
Its pretty easy, if library supports autoclean use that, if not checkin
cleaning tape into backup application and let that do the cleaning.
Op 30 sep. 2016 08:03 schreef "Victor Shum" :
> Dear:
>
>
>
> We are confuse on how to handle cleaning tape in TSM environment.
>
>
Doc states only meta data should be replicated in that phase. Do you really
see the 1tb go over the line or is it just being reported?
Op 15 sep. 2016 16:33 schreef "Nixon, Charles D. (David)" <
cdni...@carilionclinic.org>:
> We opened a ticket related to long replication times in a container
rray <zfor...@vcu.edu>:
> On Wed, Sep 7, 2016 at 9:12 AM, Karel Bos <tsm@gmail.com> wrote:
>
> > maxnummp is ignored when going to random access storage like disk pool.
> >
>
> Say what? Where is that documented? From the book:
>
> *Server settings
red and you were
> > only
> > > > > supposed to get 2-sessions? Am I wrong in this assumption?
> > > > >
> > > > > On Wed, Aug 31, 2016 at 5:36 PM, Andrew Raibeck <
> stor...@us.ibm.com>
> > > > wrote:
> > > > >
Might want to check resourceutil settings as that limits the number of
sessions clients try to setup. It should match maxnummp or be lower.
Op 31 aug. 2016 22:21 schreef "Zoltan Forray" :
> AHA - so I am not loosing my mind (at least in this situation). I too have
> been seeing
Replications between source and target means that that data is being sent
from source is being received by target. If the target doesn't confirm
receive of data the replication process failes.
After replication process had completed one can use the q repln command to
check the replication state
Hi,
Easiest way to find the command and syntax to do a tsm db restore is using
the prepare command. Default output location is tsm server instance
directory.Output file pretty much contains everything to rebuild the
tsm server, including the restore command for the restore of tsm db to it's
Hi,
We use the ibm ts3500 lib with tsm servers able to do refreshstate but.
on aix using ibm device drivers this works, on windows the device driver
seems to block any and all communications to the lib as soon as the lib
changes it's config making this tsm option useless. Removing the
Hi Gary,
Any config info to share (size of log and archive in TSM and on OS?). Did
you reduce the active log by any change? Any relevant messages in the TSM
act log?
Kind regards,
Karel
2015-09-23 21:52 GMT+02:00 Lee, Gary :
> Currently, no long running backup sessions at all.
>
Hi,
Storing virtual volumes in a dedup pool is not supported. It was not
restricted but
http://www-01.ibm.com/support/docview.wss?uid=swg1IC64970
Kind regards,
Karel
2015-09-23 20:44 GMT+02:00 J. Pohlmann :
> So far only in a lab environment. Found that, when using
Hi,
So we get a new type of storage pools, the directory-container storage
pools. These enable TSM to do in flight dedup. But you cannot use any of
the following functions with directory-container storage pools:
- Migration
- Reclamation
- Aggregation
- Collocation
-
Hi,
Replicate node is done over the connection you use within the "define
server" command. So it is using the TSM server to server connection path.
You can define a link on OS level to be dedicated used for server to server
commands (and thus also replication) while still provide client access
New backup copies will go to new stg, existing backup copies gets rebound
to new mgmt class but won't be automatically moved from 1 stg pool to
another.
Op 13 aug. 2015 08:05 schreef Robert Ouzen rou...@univ.haifa.ac.il:
I to all
I try to figure a scenario to change a backup for a client that
Why not config new disk on old disk drive letters and move content of old
disk to new disk outside of tsm? Only thing you need the update is the
active log size in dsmserv.opt and 1 time restart tsm.
Op 22 jul. 2015 18:44 schreef Robert Ouzen rou...@univ.haifa.ac.il:
Hello
I am in stage of
Hi,
Compare q no f=d output of the node with the current ip address of that
node. Some of the registered ip's of that node might have not been updated.
Having dhcp enabled on your backup clients and having them switch ips
constantly will cause issues for tsm server to tsm client communications
Just on a side node, nvr run production on base lvl code. Might want to
upgrade to the latest fix pack on the 6.4 code.
Op 20 apr. 2015 22:13 schreef Arbogast, Warren K warbo...@iu.edu:
I sent all the suggestions to the client admin, but it took her a few days
to respond. It was indeed a NFS
Have fun and like others said you will be missed
Kind regards,
Karel
Op 3 apr. 2015 23:11 schreef Prather, Wanda wanda.prat...@icfi.com:
This is my last day at ICF, and the first day of my retirement!
I'm moving on to the next non-IT-support chapter in life.
I can't speak highly enough of
We had a customer who installed his application on d: (with windows on c:).
No files missed or excluded from the backup. His d: drive crashed and he
restored it. Again no files missed or excluded. Everyone expected success.
Sadly his application could not start.
Why?
Part of his .exe files
Hi,
Customer wants to get report on DB2 backups containing NODE_NAME
FILESPACE_NAME HL_NAME LL_NAME BACKUP_DATE and Size.
Select * from backup where node_name='' shows all but the requested object
SIZE. Does anyone has a select I can use to get the object size into this?
Kind regards,
Karel
Hi,
I have had a v 6.2.4.0 sta from an Exchange farm that stopped doing lan
free backups after upgrade the tsm aerver and lib manager to v 6.3.4.x
while all others kept on running.
After logging a call with IBM got told I had to upgrade the failing sta to
the same level as the servers. Even
Node replication is a tsm server to tsm server function. The os running
the tsm server isn't involved. Currently using node replication to migrate
nodes from aix to a win2k12 tsm environment.
Keep in mind there seem to be some tsm db issues on the target server. The
tsm db grows faster than
Have to agree with Wanda on the last point, no. Its strange TSM is the only
backup product I manage that had a good working (web) interface, dropped it
and never got a good working one ever since.
I have been using the light weighted TSMManager for years myself and know
of a couple of others that
Every IBM site seems to be needing a lot of getting used to. And now they
seem to be actively blocking google web crawlers the work around of using
Google often cant get any recent results.
Op 19 dec. 2014 15:51 schreef Zoltan Forray zfor...@vcu.edu:
NOT ME!
vent on
I haven't been on Passport
Hi,
Node replication to get all data over from small to big server and when in
sync break replication and configure backups to run on big server.
Otherwise export node toserver method (old fashion)
Op 28 okt. 2014 13:11 schreef David Ehresman
david.ehres...@louisville.edu:
What is current
Hi,
So I was planning to upgrade one of our AIX TSM servers from V6.3.4.0 to
V7.1.1.0. Downloaded the package, extracted it and tried to fire off the
well known command ./install.bin -i console 1st error.
Things change, this has changed to ./install.sh -c. And now the fun starts.
All
Hi Keith,
Many thanks to the both of you, it helped me get pass the initial
confusion.
Next step is getting more disk space and finding out what the upgrade
process needs with the user and PW for the account TSM server is running
under (we sudo and dont log in with that account).
Kind regards,
are set to read-only
with little data written to them. Not such a big deal with it's only 10
tapes or even 100 tapes... but if it's 1 tapes, it'll be a pretty big
cleanup effort.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@vm.marist.edu] On Behalf Of
Karel Bos
Would use a number a bit higher than as we had stgpools with 20-30k
volumes in it.
2014-10-10 15:34 GMT+02:00 Prather, Wanda wanda.prat...@icfi.com:
Just pointing out a more common use of maxscratch that I see at smaller
customers, which is in conjunction with collocation.
If you
Hi,
VSS is mandatory for system state backups in forced by M$.
You might look into excluding system state from TSM backups and do native
windows backup via precmd of the system state to a flat file. From what I
have heard windows native backup still handles the backup in a different
way the
Hi,
Missing the issue probably. This interim fix contains no apar fixes seems
pretty clear.
Also I suspect IBM is blocking google search bots (forcing ppl to use their
wonderful search engine) as more and more results on google point to dead
links @ ibm.
Op 9 jul. 2014 11:55 schreef BEYERS Kurt
Agreed, confige a tsm server instance with sole purpose of being config
manager and make all the backup servers config clients. We use it for years
to sync global admins, standard policies and script between all backup
servers.
In our case we added this role to one of the tsm library manager
Running out of database space and drm retention. Seems I am the only one
that is missing the relation between those 2.
Op 18 jun. 2014 18:35 schreef Plair, Ricky rpl...@healthplan.com:
Question, I am running TSM 6.3 and running out of database space with
nowhere to get more at the moment.
My
Lol, nt 4 and base lvl 5.1? Might want to look into some upgrading as both
are out of support.
Btw, apart from not running base level stuff, 7.1 doesn't support 5.1
clients.
Op 16 mei 2014 21:28 schreef Huebner, Andy andy.hueb...@novartis.com:
We are testing the upgrade from 6.2 to 7.1 and we
Wanda,
Powershell 3.0 is mentioned under the additional Microsoft prerequisites
part.
Op 21 mei 2014 05:08 schreef Prather, Wanda wanda.prat...@icfi.com:
TDP for mail is at 6.4, Exchange 2010.
Ran install of 7.1 on top, then ran setupfcm.exe.
Started DP for Exchange, it immediately fails
: Dist Stor Manager ADSM-L@VM.MARIST.EDU
On Thu, Apr 3, 2014 at 12:01 PM, Karel Bos tsm@gmail.com wrote:
Don't, just don't do 7.1 just yet.
Op 3 apr. 2014 15:09 schreef Huebner, Andy
andy.hueb...@novartis.com:
Well THAT'S a cliff-hanger -- could you describe your
Don't, just don't do 7.1 just yet.
Op 3 apr. 2014 15:09 schreef Huebner, Andy andy.hueb...@novartis.com:
We are thinking of upgrading to 7.1 from 6.2. I have not seen much
chatter about problems. Is 7.1 reliable?
I did not see any patches, are any out?
AIX and Windows.
Andy Huebner
:34 pm, Karel Bos tsm@gmail.com wrote:
Hi Zoltan,
activelogsize 19000
And there was abt 20GB free space in the active log disk.
Kind regards,
Karel
2014-02-11 14:52 GMT+01:00 Zoltan Forray zfor...@vcu.edu:
What is your ACTIVELOGSIZE set to? Maybe
Hi,
I upgraded my windows TSM Test server from V6.3.4.0 to V7.1.0.0 and it
didn't end well.
Software install went ok. Both DB2 and TSM where upgraded but the upgrade
db part ended with
SQL1762N Unable to connect to database because there is not enough space
to allocate active log files.
?
On Tue, Feb 11, 2014 at 8:44 AM, Karel Bos tsm@gmail.com wrote:
Hi,
I upgraded my windows TSM Test server from V6.3.4.0 to V7.1.0.0 and it
didn't end well.
Software install went ok. Both DB2 and TSM where upgraded but the upgrade
db part ended with
SQL1762N Unable to connect
Hi,
Just got word back from ibm support. Its WaD and if I feel it should change
feel free to file RfE.
In the meantime make sure sta client data is in the libraries sta has paths
to.
Kind regards,
Karel
Op 14 jan. 2014 22:53 schreef Karel Bos tsm@gmail.com:
Hi,
Yes, data paths are set
: ANY
Andy Huebner
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Karel Bos
Sent: Tuesday, January 14, 2014 1:20 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Lanfree restore fails when STA has no path to lib
containing data
Hi,
We have
Hi,
We have a tsm 6.2 server with 3 libs. Lib A hold copypool, B hold data
migrated from disk pool and C hold lanfree backup data.
Customer reports rman restore fails. Looking at the error log it reports
data currently not available on server. Looking at the client config it
had beem configured
Hi,
Empty is a volume status, scratch a libvol status. To remove an empty
volume from a pool issue del vol against that volume number. Response in
act log should be volume xxx deleted from storage pool. If that's not
happening, find out why and fix it
Volumes not in stg and not used for db bck
Create a dummy stg pool and add the defective tapr into it
Op 20 dec. 2013 11:02 schreef mik tsm-fo...@backupcentral.com:
Hi everybody,
I have another question, today the database don't backup on a scratch tape
because failure to excessive write error.
The tape use is still in scratch and i
No, just audit your offsite storage site from time 2 time and get all
volumes back TSM lost track of.
Kind regards,
Karel
Op 12 nov. 2013 19:02 schreef Marouf, Nick c-nimar...@pa.gov:
Hello,
Can someone maybe provide a bit more clarification on this technote?
What errors? I only see I(nfo) messages.
Op 4 nov. 2013 17:38 schreef Zoltan Forray zfor...@vcu.edu:
Need some help/suggestions to resolve these errors. Here are all of the
messages related to this system:
11/03/2013 22:04:37 ANE4940I (Session: 130593, Node: POL-FR2) Backing up
object 'ASR
/phishing.html
On Nov 4, 2013 12:14 PM, Karel Bos tsm@gmail.com wrote:
What errors? I only see I(nfo) messages.
Op 4 nov. 2013 17:38 schreef Zoltan Forray zfor...@vcu.edu:
Need some help/suggestions to resolve these errors. Here are all of
the
messages related to this system:
11
Hi,
Tried to do dbs to prot and/or dbb to lto4 to compair same type of db
backup to same type of devclass?
Kind regards,
Karel
Op 6 okt. 2013 15:08 schreef Erwann Simon erwann.si...@free.fr:
Hi all,
I've a customer who's complaining about very slow performance of backup DB
to ProtecTIER :
Tried multistream db backs to reduce db backup time?
Op 3 okt. 2013 16:39 schreef Hans Christian Riksheim bull...@gmail.com:
If I understand correctly there is no way of getting rid of the logs
without doing a full dbbackup. Is this a DB2 deficiency or is it
TSM(--RFE)?
Reason I ask is that
Hi,
DB2 backup reads config settings only at start up. Cleaning the config
files after that wont change the running setup untill db2 gets restarted.
Either check time stamp of current config files or restart db2 and see
whats going to happen :) .
Kind regards,
Karel
Op 11 sep. 2013 15:47
You lost me at the point where you cifs mount san devices...
Doing share backups isnt very fast as the backup is validating security
stuff with dc's.
Would recommenr either mounting luns or install clients at the source.
Kind regards,
Karel
Op 16 aug. 2013 17:30 schreef Zoltan Forray
Having to handle 200+ tape devices on 500+ clients (large part windows with
the fun stuff of some devices losing their device driver) doesnt sound very
appealing to me. So I am sure we stick to scsi lib type for vtls for now
and skip libt vtl untill its improved.
Op 2 aug. 2013 16:34 schreef
If you define volumes into a stg pool they get scratch=no and as such wont
return to scratch pool and relabel scratch isn't working on them.
Upd stg maxscatch= number big enough to hold all data plus some and delete
the defined empty ones to get relabel working.
Might want to enable reuse delay,
Hi,
From the looks of it (at least) 2 drives got their windows ID changed.
Check from windows end if the drive/serial/mt is still matching path defined in
tsm.
Also make sure persistent binding and persistent naming are turned on otherwise
drives will keep on jumping all over the place.
Hi,
I think doc stated not to use dev=file shared=yes for TSM db backups. From
memory it didn't specify why, but easy to setup dedicated file dev for tsm db
backup only. DDM doesn't care anyways, it does dedup over all data stored in it.
Kind regards,
Karel
- Oorspronkelijk bericht -
Dont they mean work IN progress?
- Oorspronkelijk bericht -
Van: Remco Post r.p...@plcs.nl
Verzonden: zaterdag 25 mei 2013 0:18
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp: Re: [ADSM-L] V6.1 to V6.3.3 Upgrade Question
and they still claim that v6 is progress…. shame at a missed chance for the
Hi,
One of the nice things of having all clients in polling sched mode is no need
to admin ip stuff, even when the clients ip changes without restarting tsm
services (or manual contact the tsm server).
Kind regards,
Karel
- Oorspronkelijk bericht -
Van: Zoltan Forray zfor...@vcu.edu
And I thought the question was what is it doing al those hours while no
counter gets updated aka why is the replication proces so slow?. Silly me.
K
- Oorspronkelijk bericht -
Van: Jeanne Bruno jbr...@cenhud.com
Verzonden: donderdag 23 mei 2013 23:03
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp:
Hi,
I am pretty sure it depends on your support contract. Upgrading drive/library
firmware is customer resp. Unless stated otherwise.
Kind regards,
Karel
- Oorspronkelijk bericht -
Van: Remco Post r.p...@plcs.nl
Verzonden: dinsdag 30 april 2013 19:46
Aan: ADSM-L@VM.MARIST.EDU
Hi,
Used it with adding slots, io slots and drives to lib and worked. Just make
sure lib is not being used and all drives are empty at the time of running the
audit. Co-worker tried it with lib in use and drives mounted and ended up with
one big mess to solve :D
Kind regards,
Karel
-
Hi,
Sadly there is no normal way to tell tsm what stg pool to use during restore.
Tbh the automatic way seems to be bugged (as it happely seems to use slow
storage pools, lan based with higher volumes to be mounted over fast lanfree
capable pools).
The documented work around is to update all
Hi,
dsmsta -k StorageAgentX
from command prompt where X = 2 in below information.
Kind regards,
Karel
2013/2/24 Robert Ouzen rou...@univ.haifa.ac.il
Hello
Again about this issue , still now no tips at all….
Help please
Regards Robert
Hello
I created a second TSM Storage Agent
Hi,
Was there any change in management classes (class the file was bound 2 was
deleted after file became inactive)?
Grace delay comes to mind.
Kind regards,
karel
- Oorspronkelijk bericht -
Van: Rick Adamson rickadam...@winn-dixie.com
Verzonden: maandag 12 november 2012 15:13
Aan:
Hi,
Define server uses servername and serverpa to validate where as ping uses admin
name and pass to validate session. Make sure the admin and pass on server where
you issue the ping also is avail on the server you ping to.
Kind regards,
Karel
- Oorspronkelijk bericht -
Van: Dury,
Hi,
1st run bck stg otherwise u cant do anything with files in fastdedup that dont
have a copy in some copy stg.
Kind regards,
Karel
- Oorspronkelijk bericht -
Van: Prather, Wanda wanda.prat...@icfi.com
Verzonden: dinsdag 25 september 2012 6:18
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp:
I think most other product supply it with a working gui where as tivoli dropped
the tsm web gui and has not provided tsm with any working gui for the server
forcing the admins to cmd, shit tons of custom scripts and/or 3th party tooling.
Working with commvault besides tsm, gui delivered with
Hi,
be4 going into the support call one can try and do an audit vol xxx fix=yes
to see if that clears things.
Kind regards,
Karel
- Oorspronkelijk bericht -
Van: Ehresman,David E. deehr...@louisville.edu
Verzonden: donderdag 12 april 2012 16:10
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp:
Ofc there is, just restore the tsm database to a point be4 the data being
inactivated :)
Kind regards,
karel
Verzonden vanaf mijn HTC
- Oorspronkelijk bericht -
Van: Allen S. Rout a...@ufl.edu
Verzonden: dinsdag 6 maart 2012 15:09
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp: [ADSM-L]
Hi,
If you implemeted copy stg pools the audit vol fix=yes will only mark the
damaged files as damaged in the database. The restore vol will copy the
damaged files from copy stg pool volumes back into the primary pools and the
volume that countained the damaged files will be returned to scratch
Hi,
Maybe because you didn't use exclude.systemobject?
Regards,
Karel
-Oorspronkelijk bericht-
Van: Douglas Currell [mailto:[EMAIL PROTECTED]
Verzonden: maandag 5 april 2004 17:20
Aan: [EMAIL PROTECTED]
Onderwerp: XP Cloptset backing up undesired Sys Objects
System Objects are being
[mailto:[EMAIL PROTECTED] Behalf Of
Karel Bos
Sent: Wednesday, March 31, 2004 10:54 AM
To: [EMAIL PROTECTED]
Subject: Re: Library sharing
Hi,
Can be, but don't have to be the same... In the past I saw some machines
with different device names for the same devices and it worked well with
ITSM
physical drive is the /dev/rmt3
device you would use:
define path SA1 LTO1 srctype=server desttype=drive library=3584
device=/dev/rmt3
Bill Boyer
DSS, Inc.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of
Karel Bos
Sent: Wednesday, March 31, 2004 10
Hi,
Can be, but don't have to be the same... In the past I saw some machines
with different device names for the same devices and it worked well with
ITSM (on Windows).
Regards,
Karel
-Oorspronkelijk bericht-
Van: Amos Hagay [mailto:[EMAIL PROTECTED]
Verzonden: woensdag 31 maart 2004
Reclaim is single stream per stg pool.
Regard,
Karel
-Oorspronkelijk bericht-
Van: Coats, Jack [mailto:[EMAIL PROTECTED]
Verzonden: maandag 29 maart 2004 14:45
Aan: [EMAIL PROTECTED]
Onderwerp: Multiple space reclaimation streams
Can I run multiple reclaimation streams on a single
You do need to register some license when using ITSM. First you need to
install the ITSM license, found on the full (and bought) version of the ITSM
level you installed. This will clear the try buy things. Then you need to
register the ones you do use (4 * mgsyslan.lic, 1 * libshare.lic)
Regards,
q act s=anre for errors and w for warnings.
Regards,
Karel
-Oorspronkelijk bericht-
Van: Mike Bantz [mailto:[EMAIL PROTECTED]
Verzonden: woensdag 17 maart 2004 15:20
Aan: [EMAIL PROTECTED]
Onderwerp: Querying only errors?
Does anyone know how I'd filter out the activity log to
Could be using the -servername= option in the command line.
Regards,
Karel
-Oorspronkelijk bericht-
Van: Robert Ouzen [mailto:[EMAIL PROTECTED]
Verzonden: dinsdag 16 maart 2004 17:24
Aan: [EMAIL PROTECTED]
Onderwerp: dsmcad question
Hi to all
I need to run 2 dsmcad on a same station
Hi,
Couple of things could be causing this. Most likely, the tape isn't
available in the by TSM mentioned slot.
- Slot 10 of a STK L700 Library is the upper import/export slot of this bulk
station. Is the tape placed in this slot, or is it placed any other slot?
Regards,
Karel
Hi,
Define a schedule (help define schedule) with action=restore. F
Regards,
Karel
-Oorspronkelijk bericht-
Van: PAC Brion Arnaud [mailto:[EMAIL PROTECTED]
Verzonden: dinsdag 9 maart 2004 9:13
Aan: [EMAIL PROTECTED]
Onderwerp: TSM 5.2 : restore behind a firewall, with sessioninitiation
Hi,
Volumes are attached to a defined library and each library has its own
element range. Duplicate elements will not give you any troubles.
Regards,
Karel
-Oorspronkelijk bericht-
Van: Tony Morgan [mailto:[EMAIL PROTECTED]
Verzonden: woensdag 3 maart 2004 14:09
Aan: [EMAIL PROTECTED]
TSM is not load-balancing on a drive level. TSM will use multiple drives on
a job level.
Regards,
Karel
-Oorspronkelijk bericht-
Van: Patrick Rainer [mailto:[EMAIL PROTECTED]
Verzonden: woensdag 3 maart 2004 14:41
Aan: [EMAIL PROTECTED]
Onderwerp: 2 LTO-Drives Load-Balancing
Hello TSM
Hi Peter,
Copy pools are used for Disaster Recovery. Disasters can be small, like
primary pool tape corruption/defects or large like complete site loss.
The small thing is most likely to hit you now and again. If you can afford
to lose back up or archive data because of tape damages than there
Hi,
During expiration we get the following message:
ANRD
imexp.c(4574): ThreadId71 Backup Entry for object 0.43293636 could not be
found in Expiration Processing.
Show object doesn't give anything back and delete object is failing also. We
know what file space and node it is concerning. We
Wath about the TSM server side. Is the node bound to the pol domain with
this management class? And is it all activated?
Regard,
Karel
-Oorspronkelijk bericht-
Van: Adams, Matt (US - Hermitage) [mailto:[EMAIL PROTECTED]
Verzonden: woensdag 25 februari 2004 17:31
Aan: [EMAIL PROTECTED]
PROTECTED] On Behalf Of
Karel Bos
Sent: Wednesday, February 25, 2004 10:44 AM
To: [EMAIL PROTECTED]
Subject: Re: Binding files to mgmt class
Wath about the TSM server side. Is the node bound to the pol domain with
this management class? And is it all activated?
Regard,
Karel
-Oorspronkelijk
..
I also opened up the restore GUI to see what mgmt class TSM showed it
was bound to
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Karel Bos
Sent: Wednesday, February 25, 2004 10:53 AM
To: [EMAIL PROTECTED]
Subject: Re: Binding files to mgmt
Hi,
Try audit library.
Regards,
Karel
-Oorspronkelijk bericht-
Van: Geetha Thanu [mailto:[EMAIL PROTECTED]
Verzonden: dinsdag 24 februari 2004 2:10
Aan: [EMAIL PROTECTED]
Onderwerp: Re: restore data
Hi,
The volume is present, but when i gave the second command
it gave the following
Just compaire Servergraph with TSMmanager (www.tsmmanager.com) before buying
Servergraph. We did and went for TSMmanager.
Regard,
Karel
-Oorspronkelijk bericht-
Van: Nancy Reeves [mailto:[EMAIL PROTECTED]
Verzonden: donderdag 19 februari 2004 18:05
Aan: [EMAIL PROTECTED]
Onderwerp:
Hi,
Had something like that. Turned, in our case, out to be a defect of the
mount ready sensor in the drive. In our case it was a IBM 3584 library
with LTO1 fiber drives.
Regards,
Karel
-Oorspronkelijk bericht-
Van: Warren, Matthew (Retail) [mailto:[EMAIL PROTECTED]
Verzonden:
I would create and format the volumes from within TSM. This will speed
things up!
Regard,
Karel
-Oorspronkelijk bericht-
Van: Amar Vi [mailto:[EMAIL PROTECTED]
Verzonden: donderdag 19 februari 2004 17:25
Aan: [EMAIL PROTECTED]
Onderwerp: Dsmfmt on cx600 any thoughts?
Greetings,
We
Yes, we can.
1. Yes, backups can still run.
2. Yes, restores can run. Restores have a priority over reclamation and this
will cause ANR1089W Space reclamation terminated for volume 000150L1 - lock
conflict. and ANR1171W Unable to move files associated with node ,
filespace \\XXX\f$ fsId 4 on
1 - 100 of 251 matches
Mail list logo