Re: Spectrum Protect and The mystery of data reduction differences on the replication target

As the target server only receives already dedupped data it makes sense their will be no or barely anything to be dedupped. Regards, Karel On Mon, 8 Jul 2019 at 08:16, Stefan Folkerts wrote: > Hi all, > > I'm seeing something very strange at a customer site that has two Spectrum > Protect

Re: TSM clients with 1 and 10 GB adapters

Hi, Not being a network guru myself but I recall having 2 interfaces in the same subnet even with different IP addresses is bad. On paper it looks all good, as you define multiple addresses and tell the software which one to use but in reality networks work on MAC level and TCP is just a

Re: 2 nics on tsm server.

Hi, Start with the basics, OS tools like ping. You probably have no static route to this new/seperate network. Kind regards, Karel -Oorspronkelijk bericht- Van: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Namens Bo Nielsen Verzonden: donderdag 27 juli 2017 11:10 Aan:

Re: DB2 back-up issues on Windows

t 10 or so days after a reboot. Never did get to the bottom of why, but rest assured you are not going mad. Regards Steve Steven Harris TSM Admin/Consultant Canberra Australia -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Karel Bos Sent:

Re: DB2 back-up issues on Windows

2. -Rick -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Karel Bos Sent: Thursday, February 02, 2017 6:43 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] DB2 back-up issues on Windows Hi, Every day I have to restart DB2 (sometimes multiple

DB2 back-up issues on Windows

Hi, Every day I have to restart DB2 (sometimes multiple times) due to backups stop working. The DB2 database is doing log file and normal backups to TSM and the backups stop working after the following couple of errors: 31.01.2017 10:48:04 instrStart: Unable to get write file lock or report

Re: Active data

Would expect not as the whole point of the active data pool was having active verslons on disk and inactive data on cheaper tape. Container is disk only and dedupe needs repeating blocks of data to be effective. K > Op 11 jan. 2017 om 20:09 heeft David Ehresman

Re: Client issues after upgrade

Those ddl files should have beem installed by ba client install but wont. Known bug will be fixed. Support page is up and local fix points to sub folder of baclient unpack dir to run the needed setup manually. Op 3 nov. 2016 21:25 schreef "Shawn DREW" : > I have run

Re: Decommision VM?

Data in filespaces gets expired. Filespaces by itself will not get removed automaticly. Op 3 okt. 2016 19:32 schreef "David Ehresman" : > >q copyg it-vme active standard > > > > PolicyPolicyMgmt Copy Version- Version- Retain Retain > > Domain

Re: TSM Cleaning tape handle

Its pretty easy, if library supports autoclean use that, if not checkin cleaning tape into backup application and let that do the cleaning. Op 30 sep. 2016 08:03 schreef "Victor Shum" : > Dear: > > > > We are confuse on how to handle cleaning tape in TSM environment. > >

Re: protect pool plus replicate node equals poor replication efficiencies

Doc states only meta data should be replicated in that phase. Do you really see the 1tb go over the line or is it just being reported? Op 15 sep. 2016 16:33 schreef "Nixon, Charles D. (David)" < cdni...@carilionclinic.org>: > We opened a ticket related to long replication times in a container

Re: Extra client sessions

rray <zfor...@vcu.edu>: > On Wed, Sep 7, 2016 at 9:12 AM, Karel Bos <tsm@gmail.com> wrote: > > > maxnummp is ignored when going to random access storage like disk pool. > > > > Say what? Where is that documented? From the book: > > *Server settings

Re: Extra client sessions

red and you were > > only > > > > > supposed to get 2-sessions? Am I wrong in this assumption? > > > > > > > > > > On Wed, Aug 31, 2016 at 5:36 PM, Andrew Raibeck < > stor...@us.ibm.com> > > > > wrote: > > > > >

Re: Extra client sessions

Might want to check resourceutil settings as that limits the number of sessions clients try to setup. It should match maxnummp or be lower. Op 31 aug. 2016 22:21 schreef "Zoltan Forray" : > AHA - so I am not loosing my mind (at least in this situation). I too have > been seeing

Re: TSM Replication

Replications between source and target means that that data is being sent from source is being received by target. If the target doesn't confirm receive of data the replication process failes. After replication process had completed one can use the q repln command to check the replication state

Re: Retore the database TSM V6 with "DB2

Hi, Easiest way to find the command and syntax to do a tsm db restore is using the prepare command. Default output location is tsm server instance directory.Output file pretty much contains everything to rebuild the tsm server, including the restore command for the restore of tsm db to it's

Re: TS3500 library changes to Max Cartridges and Max VIO slots

Hi, We use the ibm ts3500 lib with tsm servers able to do refreshstate but. on aix using ibm device drivers this works, on windows the device driver seems to block any and all communications to the lib as soon as the lib changes it's config making this tsm option useless. Removing the

Re: trouble with archive log not emptying

Hi Gary, Any config info to share (size of log and archive in TSM and on OS?). Did you reduce the active log by any change? Any relevant messages in the TSM act log? Kind regards, Karel 2015-09-23 21:52 GMT+02:00 Lee, Gary : > Currently, no long running backup sessions at all. >

Re: Version 7.1.3

Hi, Storing virtual volumes in a dedup pool is not supported. It was not restricted but http://www-01.ibm.com/support/docview.wss?uid=swg1IC64970 Kind regards, Karel 2015-09-23 20:44 GMT+02:00 J. Pohlmann : > So far only in a lab environment. Found that, when using

TSM 7.1.3 and Directory-container storage pools

Hi, So we get a new type of storage pools, the directory-container storage pools. These enable TSM to do in flight dedup. But you cannot use any of the following functions with directory-container storage pools: - Migration - Reclamation - Aggregation - Collocation -

Re: A few questions about Node Replication

Hi, Replicate node is done over the connection you use within the "define server" command. So it is using the TSM server to server connection path. You can define a link on OS level to be dedicated used for server to server commands (and thus also replication) while still provide client access

Re: Different management class

New backup copies will go to new stg, existing backup copies gets rebound to new mgmt class but won't be automatically moved from 1 stg pool to another. Op 13 aug. 2015 08:05 schreef Robert Ouzen rou...@univ.haifa.ac.il: I to all I try to figure a scenario to change a backup for a client that

Re: Moving DB , LOG , ARCHLOG

Why not config new disk on old disk drive letters and move content of old disk to new disk outside of tsm? Only thing you need the update is the active log size in dsmserv.opt and 1 time restart tsm. Op 22 jul. 2015 18:44 schreef Robert Ouzen rou...@univ.haifa.ac.il: Hello I am in stage of

Re: Problem logging in to administrator ID with DHCP node

Hi, Compare q no f=d output of the node with the current ip address of that node. Some of the registered ip's of that node might have not been updated. Having dhcp enabled on your backup clients and having them switch ips constantly will cause issues for tsm server to tsm client communications

Re: Linux 6.4 client hangs on starting dsmc

Just on a side node, nvr run production on base lvl code. Might want to upgrade to the latest fix pack on the 6.4 code. Op 20 apr. 2015 22:13 schreef Arbogast, Warren K warbo...@iu.edu: I sent all the suggestions to the client admin, but it took her a few days to respond. It was indeed a NFS

Re: So long, and thank you...

Have fun and like others said you will be missed Kind regards, Karel Op 3 apr. 2015 23:11 schreef Prather, Wanda wanda.prat...@icfi.com: This is my last day at ICF, and the first day of my retirement! I'm moving on to the next non-IT-support chapter in life. I can't speak highly enough of

Re: VSS SystemState issues

We had a customer who installed his application on d: (with windows on c:). No files missed or excluded from the backup. His d: drive crashed and he restored it. Again no files missed or excluded. Everyone expected success. Sadly his application could not start. Why? Part of his .exe files

select * from backups + file size

Hi, Customer wants to get report on DB2 backups containing NODE_NAME FILESPACE_NAME HL_NAME LL_NAME BACKUP_DATE and Size. Select * from backup where node_name='' shows all but the requested object SIZE. Does anyone has a select I can use to get the object size into this? Kind regards, Karel

Re: 5.5 LANfree together with a 7.1 server

Hi, I have had a v 6.2.4.0 sta from an Exchange farm that stopped doing lan free backups after upgrade the tsm aerver and lib manager to v 6.3.4.x while all others kept on running. After logging a call with IBM got told I had to upgrade the failing sta to the same level as the servers. Even

Re: Client node replication

Node replication is a tsm server to tsm server function. The os running the tsm server isn't involved. Currently using node replication to migrate nodes from aix to a win2k12 tsm environment. Keep in mind there seem to be some tsm db issues on the target server. The tsm db grows faster than

Re: Administration Center Future

Have to agree with Wanda on the last point, no. Its strange TSM is the only backup product I manage that had a good working (web) interface, dropped it and never got a good working one ever since. I have been using the light weighted TSMManager for years myself and know of a couple of others that

Re: Who thinks the redesigned PASSPORT site is easy to use?

Every IBM site seems to be needing a lot of getting used to. And now they seem to be actively blocking google web crawlers the work around of using Google often cant get any recent results. Op 19 dec. 2014 15:51 schreef Zoltan Forray zfor...@vcu.edu: NOT ME! vent on I haven't been on Passport

Re: Merging a small TSM server with a larger one

Hi, Node replication to get all data over from small to big server and when in sync break replication and configure backups to run on big server. Otherwise export node toserver method (old fashion) Op 28 okt. 2014 13:11 schreef David Ehresman david.ehres...@louisville.edu: What is current

AIX Upgrade TSM V6.3.4.0 to V7.1.1.0 issue

Hi, So I was planning to upgrade one of our AIX TSM servers from V6.3.4.0 to V7.1.1.0. Downloaded the package, extracted it and tried to fire off the well known command ./install.bin -i console 1st error. Things change, this has changed to ./install.sh -c. And now the fun starts. All

Re: AIX Upgrade TSM V6.3.4.0 to V7.1.1.0 issue

Hi Keith, Many thanks to the both of you, it helped me get pass the initial confusion. Next step is getting more disk space and finding out what the upgrade process needs with the user and PW for the account TSM server is running under (we sudo and dont log in with that account). Kind regards,

Re: maxscratch

are set to read-only with little data written to them. Not such a big deal with it's only 10 tapes or even 100 tapes... but if it's 1 tapes, it'll be a pretty big cleanup effort. -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@vm.marist.edu] On Behalf Of Karel Bos

Re: maxscratch

Would use a number a bit higher than as we had stgpools with 20-30k volumes in it. 2014-10-10 15:34 GMT+02:00 Prather, Wanda wanda.prat...@icfi.com: Just pointing out a more common use of maxscratch that I see at smaller customers, which is in conjunction with collocation. If you

Re: Backing up systemstate with something besides VSS

Hi, VSS is mandatory for system state backups in forced by M$. You might look into excluding system state from TSM backups and do native windows backup via precmd of the system state to a flat file. From what I have heard windows native backup still handles the backup in a different way the

Re: APARs fixed in TSM 7.1.0.100

Hi, Missing the issue probably. This interim fix contains no apar fixes seems pretty clear. Also I suspect IBM is blocking google search bots (forcing ppl to use their wonderful search engine) as more and more results on google point to dead links @ ibm. Op 9 jul. 2014 11:55 schreef BEYERS Kurt

Re: Admin accounts with mutiple TSM servers

Agreed, confige a tsm server instance with sole purpose of being config manager and make all the backup servers config clients. We use it for years to sync global admins, standard policies and script between all backup servers. In our case we added this role to one of the tsm library manager

Re: SET DRMDBBACKUPEXPIREDAYS

Running out of database space and drm retention. Seems I am the only one that is missing the relation between those 2. Op 18 jun. 2014 18:35 schreef Plair, Ricky rpl...@healthplan.com: Question, I am running TSM 6.3 and running out of database space with nowhere to get more at the moment. My

Re: TSM 7.1 upgrade

Lol, nt 4 and base lvl 5.1? Might want to look into some upgrading as both are out of support. Btw, apart from not running base level stuff, 7.1 doesn't support 5.1 clients. Op 16 mei 2014 21:28 schreef Huebner, Andy andy.hueb...@novartis.com: We are testing the upgrade from 6.2 to 7.1 and we

Re: TDP mail upgrd from 6.4 to 7.1 - Windows Powershell 3.0 requirement?

Wanda, Powershell 3.0 is mentioned under the additional Microsoft prerequisites part. Op 21 mei 2014 05:08 schreef Prather, Wanda wanda.prat...@icfi.com: TDP for mail is at 6.4, Exchange 2010. Ran install of 7.1 on top, then ran setupfcm.exe. Started DP for Exchange, it immediately fails

Re: SV: [ADSM-L] V7 Stable?

: Dist Stor Manager ADSM-L@VM.MARIST.EDU On Thu, Apr 3, 2014 at 12:01 PM, Karel Bos tsm@gmail.com wrote: Don't, just don't do 7.1 just yet. Op 3 apr. 2014 15:09 schreef Huebner, Andy andy.hueb...@novartis.com: Well THAT'S a cliff-hanger -- could you describe your

Re: V7 Stable?

Don't, just don't do 7.1 just yet. Op 3 apr. 2014 15:09 schreef Huebner, Andy andy.hueb...@novartis.com: We are thinking of upgrading to 7.1 from 6.2. I have not seen much chatter about problems. Is 7.1 reliable? I did not see any patches, are any out? AIX and Windows. Andy Huebner

Re: upgrade V6.3.4.0 to V7.1.0.0 on Windows ended not well :(

:34 pm, Karel Bos tsm@gmail.com wrote: Hi Zoltan, activelogsize 19000 And there was abt 20GB free space in the active log disk. Kind regards, Karel 2014-02-11 14:52 GMT+01:00 Zoltan Forray zfor...@vcu.edu: What is your ACTIVELOGSIZE set to? Maybe

upgrade V6.3.4.0 to V7.1.0.0 on Windows ended not well :(

Hi, I upgraded my windows TSM Test server from V6.3.4.0 to V7.1.0.0 and it didn't end well. Software install went ok. Both DB2 and TSM where upgraded but the upgrade db part ended with SQL1762N Unable to connect to database because there is not enough space to allocate active log files.

Re: upgrade V6.3.4.0 to V7.1.0.0 on Windows ended not well :(

? On Tue, Feb 11, 2014 at 8:44 AM, Karel Bos tsm@gmail.com wrote: Hi, I upgraded my windows TSM Test server from V6.3.4.0 to V7.1.0.0 and it didn't end well. Software install went ok. Both DB2 and TSM where upgraded but the upgrade db part ended with SQL1762N Unable to connect

Re: Lanfree restore fails when STA has no path to lib containing data

Hi, Just got word back from ibm support. Its WaD and if I feel it should change feel free to file RfE. In the meantime make sure sta client data is in the libraries sta has paths to. Kind regards, Karel Op 14 jan. 2014 22:53 schreef Karel Bos tsm@gmail.com: Hi, Yes, data paths are set

Re: Lanfree restore fails when STA has no path to lib containing data

: ANY Andy Huebner -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Karel Bos Sent: Tuesday, January 14, 2014 1:20 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Lanfree restore fails when STA has no path to lib containing data Hi, We have

Lanfree restore fails when STA has no path to lib containing data

Hi, We have a tsm 6.2 server with 3 libs. Lib A hold copypool, B hold data migrated from disk pool and C hold lanfree backup data. Customer reports rman restore fails. Looking at the error log it reports data currently not available on server. Looking at the client config it had beem configured

Re: Cannot bring back a volume to scratch

Hi, Empty is a volume status, scratch a libvol status. To remove an empty volume from a pool issue del vol against that volume number. Response in act log should be volume xxx deleted from storage pool. If that's not happening, find out why and fix it Volumes not in stg and not used for db bck

Re: Tape in scratch question

Create a dummy stg pool and add the defective tapr into it Op 20 dec. 2013 11:02 schreef mik tsm-fo...@backupcentral.com: Hi everybody, I have another question, today the database don't backup on a scratch tape because failure to excessive write error. The tape use is still in scratch and i

Re: delete volhist

No, just audit your offsite storage site from time 2 time and get all volumes back TSM lost track of. Kind regards, Karel Op 12 nov. 2013 19:02 schreef Marouf, Nick c-nimar...@pa.gov: Hello, Can someone maybe provide a bit more clarification on this technote?

Re: ANE4940I Backing up object 'ASR Writer' component 'Select to include disk #0 ... for ASR restore.' using shadow copy

What errors? I only see I(nfo) messages. Op 4 nov. 2013 17:38 schreef Zoltan Forray zfor...@vcu.edu: Need some help/suggestions to resolve these errors. Here are all of the messages related to this system: 11/03/2013 22:04:37 ANE4940I (Session: 130593, Node: POL-FR2) Backing up object 'ASR

Re: ANE4940I Backing up object 'ASR Writer' component 'Select to include disk #0 ... for ASR restore.' using shadow copy

/phishing.html On Nov 4, 2013 12:14 PM, Karel Bos tsm@gmail.com wrote: What errors? I only see I(nfo) messages. Op 4 nov. 2013 17:38 schreef Zoltan Forray zfor...@vcu.edu: Need some help/suggestions to resolve these errors. Here are all of the messages related to this system: 11

Re: Slow backup DB performance to ProtecTIER

Hi, Tried to do dbs to prot and/or dbb to lto4 to compair same type of db backup to same type of devclass? Kind regards, Karel Op 6 okt. 2013 15:08 schreef Erwann Simon erwann.si...@free.fr: Hi all, I've a customer who's complaining about very slow performance of backup DB to ProtecTIER :

Re: Clear DB2-logs

Tried multistream db backs to reduce db backup time? Op 3 okt. 2013 16:39 schreef Hans Christian Riksheim bull...@gmail.com: If I understand correctly there is no way of getting rid of the logs without doing a full dbbackup. Is this a DB2 deficiency or is it TSM(--RFE)? Reason I ask is that

Re: DB2 backup defaults?

Hi, DB2 backup reads config settings only at start up. Cleaning the config files after that wont change the running setup untill db2 gets restarted. Either check time stamp of current config files or restart db2 and see whats going to happen :) . Kind regards, Karel Op 11 sep. 2013 15:47

Re: Maximum TSM nodes per server

You lost me at the point where you cifs mount san devices... Doing share backups isnt very fast as the backup is validating security stuff with dc's. Would recommenr either mounting luns or install clients at the source. Kind regards, Karel Op 16 aug. 2013 17:30 schreef Zoltan Forray

Re: Question about library type of SCSI or VTL

Having to handle 200+ tape devices on 500+ clients (large part windows with the fun stuff of some devices losing their device driver) doesnt sound very appealing to me. So I am sure we stick to scsi lib type for vtls for now and skip libt vtl untill its improved. Op 2 aug. 2013 16:34 schreef

Re: Relabaling empty volumes in DataDomain VTL

If you define volumes into a stg pool they get scratch=no and as such wont return to scratch pool and relabel scratch isn't working on them. Upd stg maxscatch= number big enough to hold all data plus some and delete the defined empty ones to get relabel working. Might want to enable reuse delay,

Re: : TSM Running out of Scratch Tapes

Hi, From the looks of it (at least) 2 drives got their windows ID changed. Check from windows end if the drive/serial/mt is still matching path defined in tsm. Also make sure persistent binding and persistent naming are turned on otherwise drives will keep on jumping all over the place.

Re: DB backups in v6 land. And, BACK DB dedupdev=yes... ?

Hi, I think doc stated not to use dev=file shared=yes for TSM db backups. From memory it didn't specify why, but easy to setup dedicated file dev for tsm db backup only. DDM doesn't care anyways, it does dedup over all data stored in it. Kind regards, Karel - Oorspronkelijk bericht -

Re: V6.1 to V6.3.3 Upgrade Question

Dont they mean work IN progress? - Oorspronkelijk bericht - Van: Remco Post r.p...@plcs.nl Verzonden: zaterdag 25 mei 2013 0:18 Aan: ADSM-L@VM.MARIST.EDU Onderwerp: Re: [ADSM-L] V6.1 to V6.3.3 Upgrade Question and they still claim that v6 is progress…. shame at a missed chance for the

Re: Clients using DHCP vs Fixed IP addresses

Hi, One of the nice things of having all clients in polling sched mode is no need to admin ip stuff, even when the clients ip changes without restarting tsm services (or manual contact the tsm server). Kind regards, Karel - Oorspronkelijk bericht - Van: Zoltan Forray zfor...@vcu.edu

Re: replication question

And I thought the question was what is it doing al those hours while no counter gets updated aka why is the replication proces so slow?. Silly me. K - Oorspronkelijk bericht - Van: Jeanne Bruno jbr...@cenhud.com Verzonden: donderdag 23 mei 2013 23:03 Aan: ADSM-L@VM.MARIST.EDU Onderwerp:

Re: Equating current 3494 configuration to TS3500

Hi, I am pretty sure it depends on your support contract. Upgrading drive/library firmware is customer resp. Unless stated otherwise. Kind regards, Karel - Oorspronkelijk bericht - Van: Remco Post r.p...@plcs.nl Verzonden: dinsdag 30 april 2013 19:46 Aan: ADSM-L@VM.MARIST.EDU

Re: Library manager question

Hi, Used it with adding slots, io slots and drives to lib and worked. Just make sure lib is not being used and all drives are empty at the time of running the audit. Co-worker tried it with lib in use and drives mounted and ended up with one big mess to solve :D Kind regards, Karel -

Re: Using pools during restore

Hi, Sadly there is no normal way to tell tsm what stg pool to use during restore. Tbh the automatic way seems to be bugged (as it happely seems to use slow storage pools, lan based with higher volumes to be mounted over fast lanfree capable pools). The documented work around is to update all

Re: How to load via a commandline a second TSM Storage Agent - part 2

Hi, dsmsta -k StorageAgentX from command prompt where X = 2 in below information. Kind regards, Karel 2013/2/24 Robert Ouzen rou...@univ.haifa.ac.il Hello Again about this issue , still now no tips at all…. Help please Regards Robert Hello I created a second TSM Storage Agent

Re: Inactive/deleted file backup not expiring

Hi, Was there any change in management classes (class the file was bound 2 was deleted after file became inactive)? Grace delay comes to mind. Kind regards, karel - Oorspronkelijk bericht - Van: Rick Adamson rickadam...@winn-dixie.com Verzonden: maandag 12 november 2012 15:13 Aan:

Re: define server for replication

Hi, Define server uses servername and serverpa to validate where as ping uses admin name and pass to validate session. Make sure the admin and pass on server where you issue the ping also is avail on the server you ping to. Kind regards, Karel - Oorspronkelijk bericht - Van: Dury,

Re: ANR1534I and DEDUPREQUIRESBACKUP ?

Hi, 1st run bck stg otherwise u cant do anything with files in fastdedup that dont have a copy in some copy stg. Kind regards, Karel - Oorspronkelijk bericht - Van: Prather, Wanda wanda.prat...@icfi.com Verzonden: dinsdag 25 september 2012 6:18 Aan: ADSM-L@VM.MARIST.EDU Onderwerp:

Re: Admin Center Issues

I think most other product supply it with a working gui where as tivoli dropped the tsm web gui and has not provided tsm with any working gui for the server forcing the admins to cmd, shit tons of custom scripts and/or 3th party tooling. Working with commvault besides tsm, gui delivered with

Re: delete volume failure under TSM 5.5.6

Hi, be4 going into the support call one can try and do an audit vol xxx fix=yes to see if that clears things. Kind regards, Karel - Oorspronkelijk bericht - Van: Ehresman,David E. deehr...@louisville.edu Verzonden: donderdag 12 april 2012 16:10 Aan: ADSM-L@VM.MARIST.EDU Onderwerp:

Re: Re-activating files?

Ofc there is, just restore the tsm database to a point be4 the data being inactivated :) Kind regards, karel Verzonden vanaf mijn HTC - Oorspronkelijk bericht - Van: Allen S. Rout a...@ufl.edu Verzonden: dinsdag 6 maart 2012 15:09 Aan: ADSM-L@VM.MARIST.EDU Onderwerp: [ADSM-L]

Re: Get rid of damaged files?

Hi, If you implemeted copy stg pools the audit vol fix=yes will only mark the damaged files as damaged in the database. The restore vol will copy the damaged files from copy stg pool volumes back into the primary pools and the volume that countained the damaged files will be returned to scratch

Re: XP Cloptset backing up undesired Sys Objects

Hi, Maybe because you didn't use exclude.systemobject? Regards, Karel -Oorspronkelijk bericht- Van: Douglas Currell [mailto:[EMAIL PROTECTED] Verzonden: maandag 5 april 2004 17:20 Aan: [EMAIL PROTECTED] Onderwerp: XP Cloptset backing up undesired Sys Objects System Objects are being

Re: Library sharing

[mailto:[EMAIL PROTECTED] Behalf Of Karel Bos Sent: Wednesday, March 31, 2004 10:54 AM To: [EMAIL PROTECTED] Subject: Re: Library sharing Hi, Can be, but don't have to be the same... In the past I saw some machines with different device names for the same devices and it worked well with ITSM

Re: Library sharing

physical drive is the /dev/rmt3 device you would use: define path SA1 LTO1 srctype=server desttype=drive library=3584 device=/dev/rmt3 Bill Boyer DSS, Inc. -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] Behalf Of Karel Bos Sent: Wednesday, March 31, 2004 10

Re: Library sharing

Hi, Can be, but don't have to be the same... In the past I saw some machines with different device names for the same devices and it worked well with ITSM (on Windows). Regards, Karel -Oorspronkelijk bericht- Van: Amos Hagay [mailto:[EMAIL PROTECTED] Verzonden: woensdag 31 maart 2004

Re: Multiple space reclaimation streams

Reclaim is single stream per stg pool. Regard, Karel -Oorspronkelijk bericht- Van: Coats, Jack [mailto:[EMAIL PROTECTED] Verzonden: maandag 29 maart 2004 14:45 Aan: [EMAIL PROTECTED] Onderwerp: Multiple space reclaimation streams Can I run multiple reclaimation streams on a single

Re: Urgent License Database Backup Problem

You do need to register some license when using ITSM. First you need to install the ITSM license, found on the full (and bought) version of the ITSM level you installed. This will clear the try buy things. Then you need to register the ones you do use (4 * mgsyslan.lic, 1 * libshare.lic) Regards,

Re: Querying only errors?

q act s=anre for errors and w for warnings. Regards, Karel -Oorspronkelijk bericht- Van: Mike Bantz [mailto:[EMAIL PROTECTED] Verzonden: woensdag 17 maart 2004 15:20 Aan: [EMAIL PROTECTED] Onderwerp: Querying only errors? Does anyone know how I'd filter out the activity log to

Re: dsmcad question

Could be using the -servername= option in the command line. Regards, Karel -Oorspronkelijk bericht- Van: Robert Ouzen [mailto:[EMAIL PROTECTED] Verzonden: dinsdag 16 maart 2004 17:24 Aan: [EMAIL PROTECTED] Onderwerp: dsmcad question Hi to all I need to run 2 dsmcad on a same station

Re: LTO Tape Question

Hi, Couple of things could be causing this. Most likely, the tape isn't available in the by TSM mentioned slot. - Slot 10 of a STK L700 Library is the upper import/export slot of this bulk station. Is the tape placed in this slot, or is it placed any other slot? Regards, Karel

Re: TSM 5.2 : restore behind a firewall, with sessioninitiation s erveronly ?

Hi, Define a schedule (help define schedule) with action=restore. F Regards, Karel -Oorspronkelijk bericht- Van: PAC Brion Arnaud [mailto:[EMAIL PROTECTED] Verzonden: dinsdag 9 maart 2004 9:13 Aan: [EMAIL PROTECTED] Onderwerp: TSM 5.2 : restore behind a firewall, with sessioninitiation

Re: Attaching 2 identical tape libraries - element numbers

Hi, Volumes are attached to a defined library and each library has its own element range. Duplicate elements will not give you any troubles. Regards, Karel -Oorspronkelijk bericht- Van: Tony Morgan [mailto:[EMAIL PROTECTED] Verzonden: woensdag 3 maart 2004 14:09 Aan: [EMAIL PROTECTED]

Re: 2 LTO-Drives Load-Balancing

TSM is not load-balancing on a drive level. TSM will use multiple drives on a job level. Regards, Karel -Oorspronkelijk bericht- Van: Patrick Rainer [mailto:[EMAIL PROTECTED] Verzonden: woensdag 3 maart 2004 14:41 Aan: [EMAIL PROTECTED] Onderwerp: 2 LTO-Drives Load-Balancing Hello TSM

Re: COPY POOL Basic Question

Hi Peter, Copy pools are used for Disaster Recovery. Disasters can be small, like primary pool tape corruption/defects or large like complete site loss. The small thing is most likely to hit you now and again. If you can afford to lose back up or archive data because of tape damages than there

ANR9999D imexp.c(4574)

Hi, During expiration we get the following message: ANRD imexp.c(4574): ThreadId71 Backup Entry for object 0.43293636 could not be found in Expiration Processing. Show object doesn't give anything back and delete object is failing also. We know what file space and node it is concerning. We

Re: Binding files to mgmt class

Wath about the TSM server side. Is the node bound to the pol domain with this management class? And is it all activated? Regard, Karel -Oorspronkelijk bericht- Van: Adams, Matt (US - Hermitage) [mailto:[EMAIL PROTECTED] Verzonden: woensdag 25 februari 2004 17:31 Aan: [EMAIL PROTECTED]

Re: Binding files to mgmt class

PROTECTED] On Behalf Of Karel Bos Sent: Wednesday, February 25, 2004 10:44 AM To: [EMAIL PROTECTED] Subject: Re: Binding files to mgmt class Wath about the TSM server side. Is the node bound to the pol domain with this management class? And is it all activated? Regard, Karel -Oorspronkelijk

Re: Binding files to mgmt class

.. I also opened up the restore GUI to see what mgmt class TSM showed it was bound to -Original Message- From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Karel Bos Sent: Wednesday, February 25, 2004 10:53 AM To: [EMAIL PROTECTED] Subject: Re: Binding files to mgmt

Re: restore data

Hi, Try audit library. Regards, Karel -Oorspronkelijk bericht- Van: Geetha Thanu [mailto:[EMAIL PROTECTED] Verzonden: dinsdag 24 februari 2004 2:10 Aan: [EMAIL PROTECTED] Onderwerp: Re: restore data Hi, The volume is present, but when i gave the second command it gave the following

Re: Anyone using Servergraph?

Just compaire Servergraph with TSMmanager (www.tsmmanager.com) before buying Servergraph. We did and went for TSMmanager. Regard, Karel -Oorspronkelijk bericht- Van: Nancy Reeves [mailto:[EMAIL PROTECTED] Verzonden: donderdag 19 februari 2004 18:05 Aan: [EMAIL PROTECTED] Onderwerp:

Re: Volume mounts but TSM doesnt use it

Hi, Had something like that. Turned, in our case, out to be a defect of the mount ready sensor in the drive. In our case it was a IBM 3584 library with LTO1 fiber drives. Regards, Karel -Oorspronkelijk bericht- Van: Warren, Matthew (Retail) [mailto:[EMAIL PROTECTED] Verzonden:

Re: Dsmfmt on cx600 any thoughts?

I would create and format the volumes from within TSM. This will speed things up! Regard, Karel -Oorspronkelijk bericht- Van: Amar Vi [mailto:[EMAIL PROTECTED] Verzonden: donderdag 19 februari 2004 17:25 Aan: [EMAIL PROTECTED] Onderwerp: Dsmfmt on cx600 any thoughts? Greetings, We

Re: Reclamation Questions

Yes, we can. 1. Yes, backups can still run. 2. Yes, restores can run. Restores have a priority over reclamation and this will cause ANR1089W Space reclamation terminated for volume 000150L1 - lock conflict. and ANR1171W Unable to move files associated with node , filespace \\XXX\f$ fsId 4 on

  1   2   3   >