The new drives can read the old tapes, they can write the old tapes in the new denser
format, but they CANNOT append to old tapes. So you must either define a new device
class as has already been suggested or at time of conversion, mark all existing tapes
as READONLY to prevent TSM from
or will I have 3 volumes each 1/3 full?
David Ehresman
We run our recovery log in Roll forward mode. We recently added some recovery log
space and now would like to remove some of the old recovery log space. We apparently
have to change our recovery log to Normal mode to do this.
What are the operational implications of moving from Roll
Is a dbupgrade required going from 4.1 - 4.2 server? Anything else to watch out for?
3590E1As ONLY write at the higher density. So when you reuse your old carts they will
get written at the higher density. The new drives can still read the lower density.
A Q VOLHIST TYPE=BACKUPSET lists some old backupsets whose retention period has long
past. Q BACKUPSET does not show these backupsets. A DELETE BACKUPSET for them
reports No match found using this criteria. How do I remove these from VOLHIST so I
can reuse the volumes?
The doc is in the TSM for OS/390 and z/OS Quick Start v4r2. A upgradedb
is needed.
David
[EMAIL PROTECTED] 01/15/02 07:01AM
Does anybody know where I can find this upgrade documentation ?
Different steps to execute, UpgradeDB needed, etc ?
In the documentation I got with installation cart
the current one finishes.
--
David Ehresman
[EMAIL PROTECTED]
Jim,
I do not have an answer to your question but I would be very interested in
hearing about your TSM/VE DR experience. We have not yet had the opportunity
to use VME in a DR test.
David Ehresman
deehr...@louisville.edu
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM
show
the class_name as DEFAULT not MGMCLASS.
David Ehresman
Jim,
Are you using the default of 50 for mbobjrefreshthresh or have you adjusted
that value? If so, how did you determine what to change it to?
David Ehresman-
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Schneider, Jim
Sent: Thursday
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of David
Ehresman
Sent: Friday, August 29, 2014 7:51 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] tsm for ve DR config question
Jim,
Are you using the default of 50 for mbobjrefreshthresh or have you
that we do not want
to back up and a -vm=*-NB to exclude those.
Schedule parameters like you listed in your email are like the ones the VME GUI
will generate if you ask it to build a schedule.
David Ehresman
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU
I have a set of exchange backups that seem to be failing because the password
for the admin associated with the node has expired. Why is it using the admin
user rather than the node user?
09/02/2014 22:32:30 ANR0406I Session 481168 started for node DPMBXT01 (TDP
MSExchg)
TSM/VE has a Data Protection for VM app that can be loaded on a VM and used to
restore individual files from VME backups. It installs from a big installer
app. Has anyone extracted just the msi for the file restore app so that app
could be auto-deployed with Windows tools?
David
Stor Manager ADSM-L@VM.MARIST.EDU wrote on 09/03/2014
12:14:01 PM:
From: David Ehresman david.ehres...@louisville.edu
To: ADSM-L@VM.MARIST.EDU
Date: 09/03/2014 12:14 PM
Subject: TSM for Email
Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU
I have a set of exchange backups that seem
Sounds like apar IT00973.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Hans
Christian Riksheim
Sent: Monday, September 08, 2014 8:30 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Vmware backup fills up C:\Windows\temp
I must regularly
Can the 7.1.1 OpCenter be run with pre-7.1 servers?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Prather, Wanda
Sent: Tuesday, September 23, 2014 12:49 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] tsm administration via web
The ISC is
Is there a way to find out what indexes a given TSM table, e.g. the backups
table, has? Just trying to optimize a select statement.
David
So how small of a linux machine did you use and is it big enough to run
OpCenter reasonably well?
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Rhodes, Richard L.
Sent: Tuesday, September 30, 2014 2:35 PM
To: ADSM-L@VM.MARIST.EDU
If all you want is a count of VMs that have a backup, this should work:
select count(*) from filespaces where node_name='NODEOFVMEBACKUPNODE'
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Schneider, Jim
Sent: Friday, October 03, 2014 11:29
Eric,
That is correct. If you use maxscratch, it should be set to the total number
of volumes you want a particular storagepool to use. If you have multiple
storagepools sharing a tape library (virtual or not), the sum of their
maxscratches should equal the number of volumes in the library.
Wanda,
We start backups in earnest at 10pm. At that time, all of our 206 virtual
drives are busy. So we don't worry about balancing across HBAs. They all have
I/O on them.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Prather,
I am backing up a VM which has two hard disks use TSMVE incremental forever.
If I switch to only backing up the first hard disk, will backups for the 2nd
hard disk expire? Or will they hang around forever? TSMVE 7.1.1.0.
David
Are you sure you included the VM feature when you upgraded the B/A client?
FYI, if you do the VME upgrade to 7.1.1.0 first, it will automatically upgrade
the B/A client as well.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tom
I have my VME storage pool setup to collocate by filespace so (mostly) each VM
has its own set of backup volumes.
For my upcoming DR test we will be restoring one or two VMs. I desperately need
a way to determine which set of volumes are being used by any given VM. Any
help out there?
David
Thanks. I expected queries against the volumeusage table to run forever, but
this actually ran quite quickly.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Arbogast, Warren K
Sent: Wednesday, October 22, 2014 10:42 AM
To:
as the primary storage
pool. The smaller virtual tape library can be rewired to be attached to the
larger server. The smaller server has 14 backup nodes.
David Ehresman
University of Louisville
Anyone upgraded to TSM 7.1.1 on AIX? I'm getting the following out of the
installer:
Loading fixes...
Validating package prerequisites...
.
Finding compatible package groups...
= IBM Installation Manager Install Location
Incompatible existing package groups:
1. IBM Tivoli Storage
Do I have to uninstall tsm 7.1.0 before I can install 7.1.1?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of David
Ehresman
Sent: Wednesday, December 10, 2014 8:11 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] TSM 7.1.1 on AIX
Anyone upgraded
Or
select library_name,max(volume_name) FROM libvolumes group by library_name
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Thomas
Denier
Sent: Thursday, December 11, 2014 10:46 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] SQL for
Update stg STOAGEPOOL_NAME MIGPRocess=XXX where XXX is how many threads you
want for your migration process.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Lee,
Gary
Sent: Tuesday, December 16, 2014 3:04 PM
To: ADSM-L@VM.MARIST.EDU
: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] De la part de David
Ehresman
Envoyé : 16 décembre 2014 15:31
À : ADSM-L@VM.MARIST.EDU
Objet : Re: [ADSM-L] breaking up tsm for ve backups into different nodes
Update stg STOAGEPOOL_NAME MIGPRocess=XXX where XXX is how many threads you
want
What is the select statement syntax for concatenating
client_version,client_release,client_level,client_sublevel from the nodes table
into a single string, e.g. 7.1.1.3?
David
Has anyone done TSM Server Scheduling of SQL backups where there are multiple
SQL databases on a single server, each using a unique TSM node name for
backups? Any hints? I'm a TSM server admin but know next to nothing about SQL
or TSM for SQL.
David
ANR4578E Database backup/restore terminated -
required
volume was not mounted. (PROCESS: 13)
Thanks Regards,
Srikanth kola
Backup Recovery
IBM India Pvt Ltd, Chennai
Mobile: +91 9885473450
From: David Ehresman david.ehres...@louisville.edu
To: ADSM-L
Recovery
IBM India Pvt Ltd, Chennai
Mobile: +91 9885473450
From: David Ehresman david.ehres...@louisville.edu
To: ADSM-L@VM.MARIST.EDU
Date: 01/28/2015 06:48 PM
Subject:Re: [ADSM-L] req: tsm db backup completed with failure and
taking all scratch tapes fro DB BC
Sent by:ADSM
Try running:
select library_name, -
count(*) from libvolumes -
where lower(status)='scratch' -
group by library_name
to make sure TSM thinks you have scratch tapes.
Does the actlog show any tape mounts after the start of the backup db command?
David
-Original Message-
From: ADSM:
Here is a script that I picked up at SHARE years ago that lists PRIVATE tapes
that are not in fact in use:
tsm: ULTSMq script q_lost_tapes f=l
Name Line Command
Number
-- --
Q_LOST_TA- 10 select
Tivoli Storage Manager Suite for Unified Recovery can be licensed for AIX
servers and does include TSM for Databases (including Oracle).
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Abdelwahed RABBAB
Sent: Tuesday, March 17, 2015 7:36 AM
Is IC92873 fixed in TSM 7.1?
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Andrew
Raibeck
Sent: Thursday, March 12, 2015 11:09 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] VSS SystemState issues
Hi Karel,
A somewhat related
The normal issue would be that you have INCLUDE.VMTSMVSS statements for VMs
that are not running Exchange or MSSQL. Those are the apps that are supported
for TSM application protection.
Are the VMs getting backed up?
David
-Original Message-
From: ADSM: Dist Stor Manager
really explain every case of the error, *thank you!*
Best regards,
Mike, x7942
RMD IT Client Services
On Mon, Mar 30, 2015 at 11:14 AM, David Ehresman
david.ehres...@louisville.edu wrote:
The normal issue would be that you have INCLUDE.VMTSMVSS statements for
VMs that are not running Exchange
You need to put the VM excludes either in each of datamover dsm.opt or put them
in the schedule that the datamover is associated with. We put them in the
schedule because I can update them without logging onto each of the datamovers.
David
-Original Message-
From: ADSM: Dist Stor
We backup about 350 VMs with a retention period of 30 days. We have a 400G
VMCTL storage pool which is 50% utilized.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
McWilliams, Eric
Sent: Wednesday, February 25, 2015 2:11 PM
To:
I've been admin TSM since the V3 days if memory serves, and sometimes it
doesn't so much anymore. I've had a lot less problems with TSM since the move
to DB2. We are now at 7.1.1. I do not know DB2 and have not had a need to
learn it. We back up about 400 servers, 350 VMs, 100 databases, and
I'm having trouble with sql time again. I am trying to get
current_timestamp-backup_end from the filespaces table to display as days and
fractions of days. Any ideas?
David
impotence.
--Mahatma Gandhi
On Apr 30, 2015, at 8:53 AM, David Ehresman david.ehres...@louisville.edu
wrote:
I'm having trouble with sql time again. I am trying to get
current_timestamp-backup_end from the filespaces table to display as days and
fractions of days. Any ideas?
David
If you rename a VME filespace using the force=yes parameter to match a renamed
VM name, will it still force a Full on the first backup of the renamed VM?
David
Keith,
What a good idea! We do the same.
David Ehresman
University of Louisville
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Arbogast, Warren K
Sent: Tuesday, May 19, 2015 7:40 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] including
Is TSM/CMS supported for TSM/VE Windows Datamover nodes?
David
movers, I
could install the code on a dozen machines and review the logs of hundreds of
VMs. Very much more bang for the buck.
David Ehresman
University of Louisville
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Robert
Jose
Sent: Tuesday
Maxscratch defines how many scratch volumes you can have in a storagepool.
When you reach maxscratch, assuming you do not have volumes predefined, you are
by definition out of data storage space regardless of how much space is in your
filesystem.
-Original Message-
From: ADSM: Dist
The 7.1.2 doc indicates I need Proxy Pairs for VE mount and instant restore.
But I can't find the doc that tells me how to set them up. I appear to need a
Windows and a Linux server. Do they have to be dedicated? Can I/should I use
a data mover as one of the proxies? Do I need to install
Is there a way to query the size of the activedata per node/per
storagegroup/per tsm server? I'm not asking the size of an activedata
storagepool, there is none, but the size of the currently active, as opposed to
inactive, data TSM is storing.
David
Gary,
TSMVE 7.1.2 makes file level restores a reality. You may want to work with
them a bit before deciding if you want to go to all random disk.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Lee,
Gary
Sent: Friday, August 21, 2015
Try dsmc q opt|less or just dsmc q opt|. On my Linux TBMR systems the
/dev is on the line following VIRTUALMOUNTPOINT: in the q opt output.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Loon,
EJ van (ITOPT3) - KLM
Sent: Tuesday,
the whole line (through vi) and recreated it (also through
vi), just to prevent special characters or crlf's, but to no avail...
Kind regards,
Eric van Loon
AF/KLM Storage Engineering
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of David
Ehresman
Sent
AF/KLM Storage Engineering
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf
Of David Ehresman
Sent: dinsdag 14 juli 2015 16:50
To: ADSM-L@VM.MARIST.EDU
Subject: Re: Virtualmountpoint not working
I'd try a backup. I'm pretty sure it is just
VGs are cheap. Why does your AIX admin want to reduce the number of VGs?
David Ehresman
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Huebner, Andy
Sent: Wednesday, July 15, 2015 9:03 AM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Disk
Remco,
Have you checked for firewalls between your workstation and the vCenter and the
machine where the TDP VMware is running?
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Remco
Post
Sent: Wednesday, October 28, 2015 9:59 PM
To:
I'm trying to determine if I can reduce the amount of TSMVE CTL data I have to
restore at my DR site. I did a select against the backups table to count how
many active and inactive files I had. It told me that all the files in that
storage class were active and there were no inactive. How
On AIX, can I put dsm.sys in a directory other than the ba install directory?
If so, how do I point to it?
David
or Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
David Ehresman
Sent: Tuesday, November 17, 2015 7:30 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TSM Expired Objects List...
If you run expiration explicitly (recommended) with the "expire inventory"
command, the details are written
If you run expiration explicitly (recommended) with the "expire inventory"
command, the details are written to the activity log.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Kiran.839
Sent: Tuesday, November 17, 2015 5:01 AM
To:
is 7.1.3 and my TSM server is version
7.1.1.300 running on AIX 7.1.
David Ehresman
University of Louisville
On VMware backups, delete filespace will delete all of the backups for the VM,
not just the newly excluded volumes.
Excluding the Hard Disks will make current backups for those disks inactive and
they will age out based on your retention policy. I do not think you can
delete them otherwise
The TSM Redbook found at http://www.redbooks.ibm.com/redbooks/pdfs/sg247505.pdf
has a chapter on TSM managed tape encryption and how it is handled.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
McWilliams, Eric
Sent: Wednesday, July
Does anyone know what IBM Passport is calling the 7.1.3 version of Client
Management Service (CMS). I don't see a download file that sounds like it fits
the description.
David
From the v7.1 AIX server installation manual:
Restrictions:
v A single server cannot be both a hub server and a spoke server.
v Each spoke server can be assigned to only one hub server.
v Each hub server requires a separate instance of the Operations Center, each of
which has a separate web
DOMAIN.VMFULL vm=abc_template
Should back up just the template
Why do you want to back up templates on a different schedule instead of
everything at once?
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of James
Thorne
Sent: Wednesday,
] On Behalf Of
David Ehresman
Sent: dinsdag 17 november 2015 15:29
To: ADSM-L@VM.MARIST.EDU
Subject: Re: TSM Expired Objects List...
Add the "quiet=no" option to the command. At my level of TSM, 7.1, it is
the default but if you explicitly request it you should get details. Also
check th
If you are using container stgpools, how are you using the "protect stgpool"
command? Are you running it throughout the backup window or after backups have
completed? When and how often do you run the "replicate node" command? Are you
using the forcereconcile option? Why or why not?
I'm
Tom,
I'm asking the obvious, but are you saying there are no entries in the
dsmerror.log in the baclient folder of the datamover?
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tom
Alverson
Sent: Friday, June 03, 2016 11:55 AM
To:
On a datamover node, run:
dsmc -asnode=XXX
q vm YYY -inactive
where XXX is the "datacenter node" that is used to record the VME data
and YYY is the VM node in question.
You can add -detail to the query for more verbose output.
David
-Original Message-
From: ADSM: Dist Stor Manager
What is the REUSE parm set at for the storagepools in question? My observation
is that at TSM 7.1.5.1 & 2, the space shows as DELETED until the REUSE period
is up and expiration has run.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Gary,
It might be useful to turn on server side tracing before the db backup begins
and turn it off after it finishes. That way you would have a trace file to
look at the next time it fails. The following link deals with a db backup
issue which does not seem to fit your case because yours is
If anyone is running TSM server 7.1.4.0 code level, I have been told that it
has been withdrawn due to a potential data loss problem TSM 7.1.4.1 is said to
be available with a fix for the bug.
David
I read the table to say that there is a fix for TSM 6.1 but it is not available
for general download and that you have to contact support to get the fix.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Thomas
Denier
Sent: Wednesday,
The tsmtutorials.com web page says you can rebalance space usage after adding a
new DB filespace by issuing the following commands:
* Perform the rebalance activity during a quiet time. Logon as the server
instance owner and execute the DB2 commands below. (on Windows, you need to run
Could you reduce the "Reclamation Processes" count on the storagepool by one
leaving a tape drive free for migration?
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Roger
Deschner
Sent: Wednesday, February 17, 2016 8:43 PM
To:
Anyone doing replicate node from non-container storage to a target server
storing the data in a container? I'm in early days and am getting about
500G/12 hours. I was hoping for better than that. Neither source nor target
server appeared to be stressed. What kind of throughput are you
: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] Namens David Ehresman
Verzonden: Wednesday, March 16, 2016 1:38 PM
Aan: ADSM-L@VM.MARIST.EDU
Onderwerp: [ADSM-L] TSM/VE and Containers
How does TSM/VE fit into a containerized world? I assume I can write the data
to a container. What about
How does TSM/VE fit into a containerized world? I assume I can write the data
to a container. What about the vmctl metadata; can it be stored in a container
or does it have to stay in a file based storagepool?
If both the data and the metadata are in a container and that data is
replicated
I just noticed that apar IT12010: SERVER-TO-SERVER SSL COMMUNICATION FAILS
USING CA-SIGNED CERTIFICATES is fixed in TSM server 7.1.5.0.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Bjoern
Rackoll
Sent: Tuesday, March 22, 2016 10:10
If your v6 tsm is a different server than your v7 tsm, then you only need to do
step 1 of the procedure below. It is only if you are trying to get the data
back to the original server that you have to go to a second server then back
again.
David
-Original Message-
From: ADSM: Dist
Does anyone know if a 7.1.0 TSM for SQL license is sufficient for the TSM for
SQL 7.1.4.0 update or do I have to pick up a new license somewhere?
David
Del,
After upgrading to 7.1.5 is there a way to get pre-existing container data
compressed?
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Del
Hoobler
Sent: Monday, March 21, 2016 5:53 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L]
Is there a way to move data from a container to a FILE based storage pool?
Is a TSM 7.1.1 server license sufficient for TSM server 7.1.5 or will I need to
download 7.1.3 to get a new license for the 7.1.5 code base?
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Andrew
Raibeck
Sent: Wednesday, April 06, 2016
My server install bin directory has a dsmserv.rc script which it says to copy
to the name of your instance owner in /etc/rc.d/init.d/
That's how I start my TSM instance on Linux.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Zoltan
What version of TSM for VE are you running? We used to have this problem but
have not seen it on v7.1.2.
David
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Plair,
Ricky
Sent: Wednesday, April 20, 2016 2:30 PM
To: ADSM-L@VM.MARIST.EDU
An all tape storage setup is certainly feasible if you have sufficient tape
drives to allow your backups to complete in your backup window. Many of us
have used this setup in the past.
You can use mount retention on the device class definition to set how long you
would like a tape to remain
/VE Return Codes
Can yoy tell US when was the last backup, try to share the complete log for
backup day ...
El 4 may. 2016 8:40, "David Ehresman" <david.ehres...@louisville.edu>
escribió:
> Does anyone know where/if TSM/VE return codes are documented?
>
> Specifical
Does anyone know where/if TSM/VE return codes are documented?
Specifically, I am looking for what the following error is trying to tell me
other than the VM did not backup:
ANS4174E Full VM backup of VMware Virtual Machine failed with RC=6577
mode=Incremental Forever
David
] Hold VM Snapshots
We are using 7.1.0.01.
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of David
Ehresman
Sent: Wednesday, April 20, 2016 3:06 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Hold VM Snapshots
What version of TSM for VE
d terabyte licensing for TSM.
Thanks & Regards
Paul
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of David
Ehresman
Sent: Wednesday, 27 July 2016 11:13 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] query auditocc question
Perhaps the fo
Perhaps the following query would give you better data:
select node_name,sum(reporting_mb) as "TOTAL_OCCUPANCY" from occupancy group by
node_name
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Paul_Dudley
Sent: Tuesday, July 26, 2016 9:35
Can one upgrade a Windows 7.1.x client to a 7.1.somethinghigher client without
a reboot or do all Windows 7.1 upgrades require a reboot?
David
TSM server 7.1.7.1 is available. Does anyone know what changes/fixes it has
compared to 7.1.7.0.
David
1 - 100 of 128 matches
Mail list logo
