Bill G created FLINK-29921:
--
Summary: Can't deserialize Avro type if schema contains a field
with name `schema`.
Key: FLINK-29921
URL: https://issues.apache.org/jira/browse/FLINK-29921
Project: Flink
Bill G created FLINK-29921:
--
Summary: Can't deserialize Avro type if schema contains a field
with name `schema`.
Key: FLINK-29921
URL: https://issues.apache.org/jira/browse/FLINK-29921
Project: Flink
[
https://issues.apache.org/jira/browse/FLINK-29738?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
]
Bill G updated FLINK-29738:
---
Description:
When streaming POJO types, the codec is registered automatically. However, when
streaming
[
https://issues.apache.org/jira/browse/FLINK-29738?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
]
Bill G updated FLINK-29738:
---
Description:
When streaming POJO types, the codec is registered automatically. However, when
streaming
[
https://issues.apache.org/jira/browse/FLINK-29738?page=com.atlassian.jira.plugin.system.issuetabpanels:all-tabpanel
]
Bill G updated FLINK-29738:
---
Description:
When streaming POJO types, the codec is registered automatically. However, when
streaming
Bill G created FLINK-29738:
--
Summary: Allow UDT codec registration for CassandraSinkBuilder
Key: FLINK-29738
URL: https://issues.apache.org/jira/browse/FLINK-29738
Project: Flink
Issue Type: New
Bill G created FLINK-29738:
--
Summary: Allow UDT codec registration for CassandraSinkBuilder
Key: FLINK-29738
URL: https://issues.apache.org/jira/browse/FLINK-29738
Project: Flink
Issue Type: New
Bill G created FLINK-29239:
--
Summary: KafkaSerializerWrapper.config should be Map
for full configurability.
Key: FLINK-29239
URL: https://issues.apache.org/jira/browse/FLINK-29239
Project: Flink
Bill G created FLINK-29239:
--
Summary: KafkaSerializerWrapper.config should be Map
for full configurability.
Key: FLINK-29239
URL: https://issues.apache.org/jira/browse/FLINK-29239
Project: Flink
earRing is not an instantiable type, it's a
component of a Polygon. If you want to instantiate a closed area, use a
Polygon. If you want to instantiate a close line, use a closed LineString.
P
> On May 13, 2020, at 12:04 AM, Teluk, Bill G
> wrote:
>
> Hi,
>
> I’ve encountered
Hi,
I’ve encountered a problem with the ST_GeomFromKML function. I’m not sure if
it’s a bug or not. The problem description is:
I have an external data source that I’m loading into a PostGIS-enabled
PostgreSQL instance. The data source is KML and needs to be parsed and loaded
to the
Interns will assist with manatee rescues, carcass salvages, and research in
east central Florida.
The Fish and Wildlife Research Institute’s (FWRI) Marine Mammal Research
subsection is looking for an intern to assist with manatee salvage, rescue,
and research at the Melbourne Beach field lab
--
___
Avra-user mailing list
Avra-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/avra-user
--
___
Avra-user mailing list
Avra-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/avra-user
--
___
Avra-user mailing list
Avra-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/avra-user
--
Go from Idea to Many App Stores Faster with Intel(R) XDK
Give your users amazing mobile app experiences with Intel(R) XDK.
Use one codebase in this all-in-one HTML5 development environment.
Design, debug & build
--
Go from Idea to Many App Stores Faster with Intel(R) XDK
Give your users amazing mobile app experiences with Intel(R) XDK.
Use one codebase in this all-in-one HTML5 development environment.
Design, debug & build
--
Go from Idea to Many App Stores Faster with Intel(R) XDK
Give your users amazing mobile app experiences with Intel(R) XDK.
Use one codebase in this all-in-one HTML5 development environment.
Design, debug & build
--
___
Avra-user mailing list
Avra-user@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/avra-user
Hi,
My name is Bill and I'm interested to install the plasma active in one
ZTE V9 tablet. how is this possible?
Thanks
Bill
___
Active mailing list
Active@kde.org
https://mail.kde.org/mailman/listinfo/active
.
--
Thanks,
Bill G.
tc3dri...@gmail.com
--
To unsubscribe:
https://lists.nongnu.org/mailman/listinfo/monit-general
settle this :)
--
Thanks,
Bill G.
tc3dri...@gmail.com
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
Hi Zaman,
There are some configurations that need to be made to the switch to allow
both nics to come up with the same mac. I am by no means a network expert,
so I cannot think of the name of the protocol off the top of my head. I am
willing to wager that the lack of that configuration is the
/listinfo/linux-cluster
--
Thanks,
Bill G.
tc3dri...@gmail.com
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
consider the environment - do you really need to print this email?
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
--
Thanks,
Bill G.
tc3dri...@gmail.com
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com
** **
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
--
Thanks,
Bill G.
tc3dri...@gmail.com
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
the problem, do you have any
other workable band-aids, besides the kill -9 and the prio program?
https://bugzilla.redhat.com/show_bug.cgi?id=618321
--
Thanks,
Bill G.
tc3dri...@gmail.com
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
luci-0.22.2-14.el6_0.1.x86_64
ricci-0.16.2-13.el6.x86_64
On Wed, Sep 28, 2011 at 8:47 PM, Fabio M. Di Nitto fdini...@redhat.comwrote:
On 09/28/2011 11:13 PM, Bill G. wrote:
Hi List,
I was wondering if you were aware of this bug, and if any of you have
had success in with the suggested work
Hi,
I am unable to get Template Substitution working in HTML files.
The HTML template has a !-- mapserver template -- line at the very top.
The Map file works fine - the images are being generated in my tmp directory.
But the HTML file returned to the browser, doesn't have any of the of the
Did you get the OCR engine to work in VB2008?
I am trying to get it to work with VB.Net and not having much luck.
Bill
On Jan 9, 4:46 am, rickson rickson.lee...@gmail.com wrote:
Hi,
I would like develop OCR using VB 2008 in my Windows Vista. May i
know is there any example code and also the
Solution found! Thanks to all the developers that contacted me.
--~--~-~--~~~---~--~~
You received this message because you are subscribed to the Google Groups
Google Maps API group.
To post to this group, send email to Google-Maps-API@googlegroups.com
To
Hi, my company's website www.realontario.ca is looking to provide
trail maps displayed on Google Maps for all the tourism regions in
Ontario that we offer.
Does anyone know of a solution (open-source or something we could
negotiate) that we could use to present trails in this way?
Right now we
.
Thanks Bill G
At 52 still learning or am I re-learning things I use to know. I forget.
in recovery. Thanks in advance
Bill G (now which pill was for the memorym Alice would know!!)
67 Delta 88 Custom
86 Custom Wagon
Thanks Randy
Bill G
Fred Wrote
Just checking to see if Chebucto finally has their act together.
Regards,
Fred
Not sure Fred last 2 post's of mine were a no show, but at least I'm
still learning in the background.
Bill G
Back to stealth mode
my good food and the 442.
There is one good think though, the 442 loves it down
here.
Rodney K.
Bootleg Pizza!! I love it!!
Bill G
a 442 emblem on my computer it would go faster...
Bill G
it is
when your above 60mph the car is so quiet so sweet.
Bill G
implied the list was old school
and not technical enough or something like that.Could be the server tech
guys were in line for a PS3..
Bill G
Olds content saw an Olds on Matlock today.
Christopher Witt wrote
here you go:
here's a real VIN tag
note the real factory rivets sealed with body sealer
I bet yours does not quite look like that.
Where's the Link ?
Bill G
Neil Whats a dizzy?
Before I put this puppy on ebay, I figured this list may be interested
HP130 in factory sealed carton
write me off list...
[EMAIL PROTECTED]
Yahoo! Groups Sponsor ~--
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet
Bob, why the fixative first?
So what was the fade resistance?
Yahoo! Groups Sponsor ~--
1.2 million kids a year are victims of human trafficking. Stop slavery.
http://us.click.yahoo.com/WpTY2A/izNLAA/yQLSAA/vIg0lB/TM
Kirk
Nice post A few things to consider
1) I have tested many 5000 - 5500 Kelvin lights, and most are not even
close typically they fall in the 4000K range... these include OTT
lights, specifically suited for daylight viewing and are quite
expensive. Some measured
Why not use the 196 Han. PR paper instead? i believe the surface is the
same, right?
Bob Wise wrote:
I believe 308 is too thick for the front slot, per the printer spec. The rear
slot is just barely within spec. Try that.
-Bob
_
From: HPDesignJet_Printers@yahoogroups.com
sorry, I meant 188 a previous poster mentioned this paper was
different than 308, but both called PhotRag?
Why not use the 196 Han. PR paper instead? i believe the surface is the
same, right?
Bob Wise wrote:
I believe 308 is too thick for the front slot, per the printer spec. The
Nice Work Haralad.now we finally know everything about Vivera inks!
Bill
:
Hi Gang,
Here's a follow-up based on a FAQ sheet dated May 2005 I just received from
HP (these are extracts):
Q5: What is the correct pronunciation of ‘Vivera’?
A5: The correct pronunciation of Vivera is
neil
Hahnemuhle 308 prints beautifully with this printer in both colour and BW.
Profiles are available on the HP site for these now.
I assume this is Photorag...? If so, sheets or rolls?
Can it handle sheets this thick?
Bill
Yahoo! Groups
* Here is what the HP media team says about Vivera differences (just received
this from HP): The bottom line is that HP 'tunes' each Vivera inkset for the
particular application. So, for example, print speed or plain paper gamut or
gloss on photo media are the types of attributes we tune to
On this Wilhelm Epson White Paper a pdf file, page 6,
he states, HP95 and HP97 are Vivera Inks. So the Vivera inks are not
unique to the HP130. but what other carts are these inks in... I
think the name change mid stream is part of the confusion but still
does not explain the
Harald
Hey Bill, I seem to be missing something here. Before I sent that last
e-mail, I checked the HP site, looking at the pages related to the DJ5500
printer
(printer pages + supplies pages), and I could not see any use of the word
Vivera. Are you perhaps referring to another printer with
Is the vivera issue resolved yet? this was a press release by HP, not
sure of date. I am still baffled why HP states you can use many fine
art papers with the HP5500 printer which uses Vivera inks, but does not
allow for such with the 130? maybe they are just behind in updating
Bill: Is the vivera issue resolved yet?
I'm waiting for an official answer from HP on this, however lots of people
there are on vacation so who knows when it will come.
Harald, I am interested in your findings, and appreciate
your list contribtutions
Regarding the
Mike, but I do not think the fixative sprays protect against UV light?
correct?
Did he comment on spraying them with clearcoat type products which are
UV protective?
Bill
I've been in contact with HP's Larry Stonestreet in San Diego CA. He
indicated that if you use HP's Photo Matte Paper
And let's not forget, we're talking about
alternate ways of inventing data -- dressing
up the pig, in other words.
H heee yeah, we all desire to make pretty
pigs. BTW, talk about dressing up A standard digital file
after spit out of any RAW converter
This is an important point. We are not talking about original data, but
modified
data and data in layers. My partner Rob, a Photoshop professional, often works
for an hour on a customer image. It is a business decision to save the
modifications within layers.
Marty Markoe
Marty,
And this is what I'm saying is... well...
not very smart. There's no more information
in that 900 meg file than in your 18.4 meg original.
Just to be clear, as this can benefit many new users to
digital files, and we all seemed to be tricked by this
there is no more
Very impressive Qimage site
I guess they demonstrated their software does a better job of uprezz
than PS. Not surprising, as PS does not hang its hat on upsizzing.
What I found interesting was, when a highly detailed file was sent to be
further upsized, the differences were nill,
and resolution is, ONLY 5% of an image, i.e. the point
of exact focus actually records the max detail the film can hold, say 50
lp/mm, but the near and far points on most landscape shots are in the 10
lp/mm range. It's the nature (and shortcoming) of optics...
Bill G
Website: http
Andrew, some good information on those links
The basic conclusion is that 6 - 10 lines per mm is the absolute maximum
visible to a good naked eye at a range of 25 cm (10 inches). Converting
to inches we get a maximum dpi of 250 with a more realistic value of
200. (If you want to allow
Just go to radio shack, get a 24 or 120v fan, mount on outside, and run
seperate power, this will assure no overheating!
neil_snape wrote:
on 20/03/2005 12:13, HPDesignJet_Printers@yahoogroups.com wrote :
You need to drop 12 volts at 0.15 amp
E=IR ...R=E/I = 12/.015 = 800 ohms.
I was considering not responding to this, as my last post touched on
most of this. But to the benefit of some, I will gamble and try again.
There is much over looked here and I know many photographers are
resolution freaks, including me.
The only question is, can the HP printers
somehow
Rafe
I need no convincing that pixels from a good digital
capture carry more information than pixels from a
film scan;
The more should say, more accurate, a pixel, a dpi,
it's all one spot in a grid.
I've seen ample evidence of that myself,
but it has no bearing on my
Michael thanks for sharing your hard earned data with the group...
Michael E. Gordon wrote:
I've noticed that there is a large set of technical documents filed
under the business support center.
Thank you, Christopher. I once again spent 1.5 hours on the phone today with
HP
Andy, who sells these compatible inks?
Bill
Andy wrote:
Greetings to all. Here goes my first post:
Two scenarios:
A) printing on combination of originial HP #85 inks for the HP 130
with original HP paper (the swellable ones such us HP premium plus
photo and proofing gloss). This is
Disregard this changed colors of email text and background, could
not see the link...sorry...
Bill
Bill G wrote:
Andy, who sells these compatible inks?
Bill
Andy wrote:
Greetings to all. Here goes my first post:
Two scenarios:
A) printing on combination of originial HP #85
Rafe, what thickness papers would you say the HP 130 is not well suited
for? 308g? Is it the paper handling capability that is the issue?
Raphael Bustin wrote:
At 02:53 AM 2/4/2005 +, Aex wrote:
I think the HP 130 is a ground breaking advancement into the area I
would like to go,
On Wed, 20 Oct 2004 15:36:28 -0500, Marc D. Murray [EMAIL PROTECTED] wrote:
So maybe I was foolish to upgrade my main system to ulb-gnome 2.8, please
don't hate me. Has SuSE even released 2.6 yet?
Package bonobo-activation-2.0 was not found in the pkg-config search path.
Perhaps
Does anyone know a maker of brass parts that are often seen on view
cameras? Knobs, threaded bars, brackets, corner protectors, etc.?
Thank you.
Bill G
___
Cameramakers mailing list
[EMAIL PROTECTED]
http://rmp.opusis.com/mailman/listinfo
I am having trouble getting FreeBSD 4.4-RELEASE to run in
vmware. I am using Windows XP Pro as the host os, vmware
version 3, and FreeBSD as the guest os. I tried searching
the mailing lists, but was unsuccessful in finding the
answer to this problem.
FreeBSD installs, but will not boot - it
Hi,
Given that each user in the application has a unique ID and each link,
button, etc. on every page also has a uniques ID, what would be a good way
to track all user activity with MANY simultaneous users in a Struts/EJB
environment ?
Bill G...
Bill
Check out TeaTimeJ Web TimeSheet www.teatimej.com. It is a STRUTS 1.0+
based application and it uses Castor JDO to maintain records in a MySQL
database.
Regards
Michael Mok
-Original Message-From: Bill G
[mailto:[EMAIL PROTECTED]]Sent: Thursday, 4
I'm looking for a working Struts DB example that demonstrates the following;
Four screens - insert a record, update a record, delete a record and select
records
From one table with 3 columns ID, FirstName, LastName.
I've looked around various places and cannot find this.
Thanks!
simple
- Original Message -
From: Bill G [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, October 03, 2001 3:19 PM
Subject: Struts DB example
I'm looking for a working Struts DB example that demonstrates the
following;
Four screens - insert a record, update a record, delete
.
-Original Message- From: Bill
G [mailto:[EMAIL PROTECTED]]
Sent: Thursday, 4 October 2001 9:50 AM To: [EMAIL PROTECTED] Subject: RE:
Struts DB example
Francisco,
That is not a database example.
Thanks though.
-Original Message- From:
Francisco Hernandez [mailto
use, and
which JDBC driver you use, and anything else you choose to layer on that (app
server, connection pooling, etc.).
You
should consult those sources and the web for more
examples.
Cheers,
Brett
-Original Message-From: Bill G
[mailto:[EMAIL PROTECTED]]Sent
check and make sure your not in Kansas before making these
statments.
Bill G...
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Klaus
Thiele Sent: Saturday, September 22, 2001 8:04 AM
To: Orion-Interest
Subject: Re: Questions about Orion
I know
.
Bill G...
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Klaus Thiele
Sent: Saturday, September 22, 2001 8:04 AM
To: Orion-Interest
Subject: Re: Questions about Orion
I know about Orion _and_ Borland's AppSrv and WebLogic and i'm glad
to use Orion
Don't know about Orion but I am using MS/SQL Server 2000 with JSQLConnect
JDBC drivers with both Borland and WebLogic Appservers. And, it is working
very well.
Bill G...
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of The
elephantwalker
Sent: Thursday
aster than static SQL. So, in a model that
employs multiple tiers, improving the speed in one tier can improve the overall
speed of you application, watch out for network I/O though.
My 2
cents,
Bill
G...
-Original Message-From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
of db hosts that share state like Sybase ASE have operated
within the most intensive applications environments around, like the NYSE
for example.
Bill G.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of The
elephantwalker
Sent: Thursday, September 06, 2001 3
I like JSQLConnect. You can find it at http://www.j-netdirect.com/
Bill G...
-Original Message-
From: Mikkel Bruun [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 17, 2001 3:05 AM
To: '[EMAIL PROTECTED]'
Subject: OT: MS SQL JDBC Drivers?
Hi Guys,
A little of topic, but anyways
Markus, Nice Work!
You should check out Ken Sipe's presentation of Struts at Borcon. The
slides and all required resources are at
http://www.borland.com/conf2001/updates/ look for presentation 3148.
Bill Gfroehrer...
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL
Thanks Anthony!!!
-Original Message-
From: Anthony Martin [mailto:[EMAIL PROTECTED]]
Sent: Thursday, August 09, 2001 10:50 AM
To: '[EMAIL PROTECTED]'
Subject: RE: jbuilder5
Here are my revised steps for starting a Struts Project in JBuilder5. I'd
appreciate any comments. If something
Just a
guess, but it sounds like a MIME type issue. Perhaps your server or service
provider needs to add that word.doc MIME type to the recognized file
types.
-Original Message-From: Eduardo Fujii
[mailto:[EMAIL PROTECTED]]Sent: Tuesday, August 07, 2001 2:44
PMTo: [EMAIL
-
From: Anthony Martin [mailto:[EMAIL PROTECTED]]
Sent: Mittwoch, 1. August 2001 22:55
To: '[EMAIL PROTECTED]'
Subject: RE: JBuilder w/Struts Support
Only steps 7 and 8 are effected by this.
-Original Message-
From: Bill G [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 01, 2001 1
Anthony,
I am trying to implement your solution and need some clarification on steps
1 and 2.
Step 1 question -
The instruction that come with the downloaded files from Borland
(Nostruts.zip webinfextension.zip) indicate that the JAR files need to
be placed into c:/jbuilder5/lib/ext which is
, this would explain it.
Anthony
-Original Message-
From: Bill G [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 01, 2001 1:06 PM
To: [EMAIL PROTECTED]
Subject: RE: JBuilder w/Struts Support
Anthony,
I am trying to implement your solution and need some clarification on steps
1 and 2.
Step
and 8 are effected by this.
-Original Message-
From: Bill G [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, August 01, 2001 1:52 PM
To: [EMAIL PROTECTED]
Subject: RE: JBuilder w/Struts Support
Hi Anthony,
This might explain why the .TLD files weren't moving over.
If this is true
Saw the following in borland.public.jbuilder newsgroup.
-
We use struts with JBuilder 4 5 no problem,
and problem you describe can be avoided.
Instead of using the default 'context' to store
your web app.,Create another 'context'
say
?
-Original Message-
From: Bill G [mailto:[EMAIL PROTECTED]]
Sent: Monday, June 18, 2001 5:04 PM
To: [EMAIL PROTECTED]
Subject: RE: java report article says bye-bye struts
Hi Craig,
Although excellent in dealing with Web-based applications, Struts is not
ready to take on EJB.
This is a concern
and attributed the Struts is not
ready to take on EJB to you. Please forgive me. I should have read
closer, but just found the quote so pompous and uninformed I couldn't
resist.
JohnH
-Original Message-
From: Bill G [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 19, 2001 3:19 PM
To: [EMAIL
Hi Craig,
Although excellent in dealing with Web-based applications, Struts is not
ready to take on EJB.
This is a concern of mine as well but as a newbie to this technology, I am
wondering how to adopt the Struts framework knowing that I will move to
EJB's. Is it worth starting with Struts
Try this link.
http://www.katungroup.com/cfscale.htm
-Original Message-
From: Joseph Thompson [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, April 24, 2001 9:35 PM
To: CF-Talk
Subject: ClusterCats
If any one has any experience in setting up ClusterCats in a Win2K
environment could they
I have done extensive research on this and I would recommend the Corda
product at http://www.corda.com
To see all available products go to this page on my site.
http://www.katungroup.com/coldfusioncustomtags.htm
This page has all the know products that I am aware of that work with
Coldfusion.
Hi Cesar,
I'm sorry for the delay in getting back with you, I've had a touch of the
flu.
One of the photo shops in Salt Lake that you may find something interesting
is Howell's. The location is 145 West 200 South so they are right downtown.
I think that his prices are on the high side for new
Hi Harry,
Most of the ghost towns that are easy to get to have been brought back to
life. That's because they were usually old mining towns in the mountains
that have a lot of scenic value, so folks have moved right back in. At one
time, Park City was practically a ghost town.
However, there
Hi Vit,
I have a manual for this flash that is in pdf format that I could e-mail you
privately if you like. The file size is about 277kb.
In the meantime, maybe I can answer a few questions. On the back of the
flash there is a dial for setting film speed. Once you do that, there is a
window
I love this group. I apologize for stating what I stated when I first got
on. I was not being christian like in my attitude.
I wish I was in Rangers though. I really miss it.
BILL
_
Get your FREE download of MSN Explorer at
1 - 100 of 118 matches
Mail list logo
