Hi
Is anyone using the Storagetek 9714 library (or any other StorageTek unit)
with Amanda with Solaris (or any other *nix)?
Thanks
Peter
-
Peter Stokes
Ashlyn Computer Services Ltd
Tel: +44 (0)1636-627900
Fax: +44 (0)1636-627909
Mbl: +44 (0)7977-532320
Web
Sorry guys, I forgot to tell, the OS is Linux.
-Original Message-
From: Otavio Fernando Moraes
To: '[EMAIL PROTECTED]'
Sent: 26/03/03 11:26
Subject: Storagetek
Hi,
Does anybody have any idea of how to setup the Library StorageTek L20
(with Quantum SDLT 320) to work with Amand
Hi,
We just ordered a StorageTEK 9730 Automated Tape Library.
It comes with a 30 cartridge capacity and 2 DLT drives.
We plan to run this with Amanda vers 2.4.3 on our Solaris 6 Sparc E6500.
I have a couple questions/requests:
Is anyone out there running a config like the one I just
Hi,
Does anybody have any idea of how to setup the Library StorageTek L20 (with
Quantum SDLT 320) to work with Amanda?
Regards,
Otavio Moraes
Hi
is someone using a Sun StorageTek C2 Autoloader with Amanda? Is this autoloder
working with Amanda? If not can you reccomend an alternative autoloader?
many thanks for your advice
antonello
Hi,
does anybody know if the tape library sun(storagetek) sl24 or
sun(storagetek) sl48 with 2 lto4 tape drives are working?
If so. how are the general parameters, which i'm missing in the "Tape Type
List <http://wiki.zmanda.com/index.php/Tapetype%20definitions> ".
thanks.
Uwe
Hi,
does any has experiences with amanda and sun(storagetek) sl24 or better
sl48 with 2 lto4 tape drives?
the tape drives are normal lto4 tape drive from HP.
Or can I simply take the configuration from the "Arcvault 48 - HP LTO4-800
tape"?
best regards,
Uwe
2009/5/18 Paul Bijn
On Wed, 2003-03-26 at 09:26, Otavio Fernando Moraes wrote:
> Hi,
> Does anybody have any idea of how to setup the Library StorageTek L20 (with
> Quantum SDLT 320) to work with Amanda?
Otavio,
I'm not using that particular library, but I'm using SDLT-320 drives, so
if
Hello,
I just finished installing a StorageTek L40 library with 40 slots and
with 4 LTO drives. Using mtx-1.2.16rel I can access and move tapes
from slots and drives even though I have to do a 'mt offline' to get
the robot to pick tapes from drives as otherwize I get scsi timeouts
amp; Geology Departments
(*) \(*) -- 140 Morrill Science Center
~~ - University of Massachusetts, Amherst
---
Erdös 4
Uwe Bartels wrote:
Hi,
does any has experiences with amanda and sun(storagetek) sl24 or
better sl48 with 2 lto4 tape drives?
the tape drives are normal
e but has been working fine and was
required for me to use the drive at all, since the "picker" just
wasn't operating properly.
On Mon, Aug 14, 2006 at 10:10:55AM +0200, Antonello Piemonte wrote:
> Hi
>
> is someone using a Sun StorageTek C2 Autoloader with Amanda? Is this
I’ve used amanda with virtual tapes successfully for years. I’m now attempting
to add a physical tape library for the first time, a StorageTek SL150 with two
LTO6 drives. After I have confidence in the configuration and some testing,
the first few actual, scheduled dumps run fine. But around
Just in case someone needs this. Took around 3 hours to complete.
define tapetype StoragetekL40 {
comment "just produced by tapetype program"
comment "LTO drive: Seagate Viper 200 STU42001LW-K"
length 100193 mbytes
filemark 704 kbytes
speed 14912 kbytes
}
library for the first time, a StorageTek SL150 with two
LTO6 drives. After I have confidence in the configuration and some testing,
the first few actual, scheduled dumps run fine. But around the 4th or 5th
regularly scheduled dump, I consistently get errors about barcode mismatches
with tape
Here is an example of an Amanda user using Sun StorageTek SL24 Tape
Autloader:
http://www.zmanda.com/zmanda-success-story-zen-innovations.html
(The Amanda Server is running SUSE in their case.)
Gunnarsson, Gunnar wrote:
> Anyone using Sun SL24 autoloader in amanda configuration on
Hi
We have linux lodged under VM on a Mainframe IBM. We wish to safeguard
these linux on material STK (Storagetek).
Know if AMANDA can compete with products such as FDR/UPSTREAM or NETBACKUP
for this kind of safeguard on large system??
Thanks
Raphaël PETITJEAN
PSA Peugeot Citroën
[EMAIL
I have been searching through the resources that I can to answers this
question, but haven't found a definitive yes or no:
Does Amanda support tape libraries with robotics such as the StorageTek
L700 or the new Sun C4?
I have seen reference that imply it might, but I want to be sure
--
Ja
We just purchased a Oracle/Sun StorageTek SL24, SCSI, with HP LTO4 FH tape
drive.
Does anyone use this model unit. If so could you send me your tapetype for the
LTO4 drive.
_
Robert P. McGraw, Jr.
Manager, Computer System
Hello Gerhardus,
I did had this message also as I tried to load a tape which had the
wrong barcode. Wrong because there was no L4 (stands for LTO4) at the
end of the barcodestring. Our Library is a L700 from Storagetek, so it
could be the same thing for you. Our old HP-Library didnt moan about
y1-library1 verify
>
> Jean-Louis
>
> On 10/02/2014 03:29 PM, Mike Driscoll wrote:
>> I’ve used amanda with virtual tapes successfully for years. I’m now
>> attempting to add a physical tape library for the first time, a StorageTek
>> SL150 with two LTO6 drives.
2009/5/18 Paul Bijnens
> On 2009-05-18 16:28, Uwe Bartels wrote:
>
>> Hi,
>>
>> does anybody know if the tape library sun(storagetek) sl24 or
>> sun(storagetek) sl48 with 2 lto4 tape drives are working?
>>
>> If so. how are the general parameters, w
racle StorageTek SL500 (2 FC LTO4 drives, redundant power supply, 50
slots)
I'd be interested in reading some of your comments regarding these units...
Which one would you recommend above all others? Do they behave well with
Amanda, mtx, etc.
Thanks!
--
Luc Lalonde
On 2009-05-18 16:28, Uwe Bartels wrote:
Hi,
does anybody know if the tape library sun(storagetek) sl24 or
sun(storagetek) sl48 with 2 lto4 tape drives are working?
If so. how are the general parameters, which i'm missing in the "Tape
Type List <http://wiki.zmanda.com/index
that it finds the robot at address 0, and the
> two drives at address 1 and 2. But properly set in amanda.conf and
> chg-scsi.conf, I don't believe that to be a problem.
>
> You may have to either take it to a winderz box and check it with
> their software, or return it to th
Quoth Jacques VB Voris IV ([EMAIL PROTECTED]):
> I have been searching through the resources that I can to answers this
> question, but haven't found a definitive yes or no:
>
> Does Amanda support tape libraries with robotics such as the StorageTek
> L700 or the new Sun
Hello Folks,
I'm getting this error when I try to use the tapes (LTO1) on a
StorageTek L40 Jukebox:
st1: Block limits 1 - 16777215 bytes.
st1: Incorrect block size.
st1: Incorrect block size.
scsi(0): Resetting Cmnd=0x01004a871b00, Handle=0x0202,
action=0x2
scsi(0:1
tape libraries.
Right now I'm considering either the Dell ML6000 line or the
StorageTek SL150, if that makes any difference.
Thanks in advance for any advice you can provide.
--
Marcus Pless
UCSD Academic Computing & Media Services
mpl...@ucsd.edu (858) 534-7872
Hello Folks,
I have a working chg-scsi.conf with 2.4.2p2 under IRIX with a StorageTek
L40. However, when I try to upgrade to 2.4.3, I get this error:
amcheck-server: could not get changer info: could not read result from
"/opt/amanda/libexec/chg-scsi"
I'd like to take advan
On Wed, 4 Apr 2007 at 10:42pm, Jacques VB Voris IV wrote
I have been searching through the resources that I can to answers this
question, but haven't found a definitive yes or no:
Does Amanda support tape libraries with robotics such as the StorageTek
L700 or the new Sun C4?
I have
Jacques VB Voris IV wrote:
> I have been searching through the resources that I can to answers this
> question, but haven't found a definitive yes or no:
>
> Does Amanda support tape libraries with robotics such as the StorageTek
> L700 or the new Sun C4?
>
> I have se
Frankly I like LTO. Supported by numerous vendors, IBM HP. Storagetek.
As far as AIT and Sony goes don't forget Beta format.
jfa
George Kelbley wrote:
I'm looking into upgrading my tape hardware, and while a I know lots of
sales types will give me lots of info, I was wondering what
On Wed, Apr 04, 2007 at 10:42:40PM -0400, Jacques VB Voris IV wrote:
> I have been searching through the resources that I can to answers this
> question, but haven't found a definitive yes or no:
>
> Does Amanda support tape libraries with robotics such as the StorageTek
> L700
u use this library
>
>
> * McGraw, Robert P [20110721 14:56]:
> >
> > We just purchased a Oracle/Sun StorageTek SL24, SCSI, with HP LTO4 FH
> tape drive.
> >
> > Does anyone use this model unit. If so could you send me your tapetype
> for the LTO4 drive.
>
&
On Fri, Aug 11, 2006 at 11:52:04AM -0400, Luc Lalonde wrote:
> Hello Folks,
>
> I'm getting this error when I try to use the tapes (LTO1) on a
> StorageTek L40 Jukebox:
>
> st1: Block limits 1 - 16777215 bytes.
> st1: Incorrect block size.
> st1: Incorrect block si
* Luc Lalonde <[EMAIL PROTECTED]> [20060811 11:52]:
> Hello Folks,
>
> I'm getting this error when I try to use the tapes (LTO1) on a
> StorageTek L40 Jukebox:
>
> st1: Block limits 1 - 16777215 bytes.
> st1: Incorrect block size.
> st1: Incorrect bl
SonyTSL-9000 1 8 96 GB
SpectraLogicBullfrog 1340 1 GB
SpectraLogicTreefrog 2000 115 750 GB
StorageTek Timberwolf 9730 2301000 GB
Straightli
4 14 GB
SonyTSL-9000 1 8 96 GB
SpectraLogicBullfrog 1340 1 GB
SpectraLogicTreefrog 2000 115 750 GB
StorageTek Timberwolf 9730 2301000 GB
Straig
Greetings.
First off, I'd like to say I've been using amanda in production for over
a year on two different LTO tape juke robots, a Storagetek L40 with three
drives and an IBM with two, Both units are using the zd-mtx glue and have
been working perfectly. Many thanks for a fin
hat is a problem ?
> How can I cross check and confirm that "hardware problems, either
the tape
> drive or maybe the cables." ??
>
>
>
Following link have photos of my tapes. Can someone confirm that
having
such label will be the problem ???
http://news.karpe.net.in/hp-s
olks,
I'm getting this error when I try to use the tapes (LTO1) on a
StorageTek L40 Jukebox:
st1: Block limits 1 - 16777215 bytes.
st1: Incorrect block size.
st1: Incorrect block size.
scsi(0): Resetting Cmnd=0x01004a871b00, Handle=0x0202,
action=0x2
scsi(0:1:15:0): Queue
it halts the process of backup"
>> >
>> >
>> > As far as my understanding amanda don't required any barcode labeling.
>> > Then what is a problem ?
>> > How can I cross check and confirm that "hardware problems, either the
>> tape
&g
ne. I get a full report
of the contents of my library.
Jean-Francois Malouin wrote:
* Luc Lalonde <[EMAIL PROTECTED]> [20060811 11:52]:
Hello Folks,
I'm getting this error when I try to use the tapes (LTO1) on a
StorageTek L40 Jukebox:
st1: Block limits 1 - 16777215 bytes.
st1: I
Hello Folks,
I'm getting this error when I try to use the tapes (LTO1) on a
StorageTek L40 Jukebox:
st1: Block limits 1 - 16777215 bytes.
st1: Incorrect block size.
st1: Incorrect block size.
scsi(0): Resetting Cmnd=0x01004a871b00,
Handle=0x0202, action=0x2
scsi(0:1:15:0):
' seems to work fine. I get a full
report of the contents of my library.
Jean-Francois Malouin wrote:
* Luc Lalonde <[EMAIL PROTECTED]> [20060811 11:52]:
Hello Folks,
I'm getting this error when I try to use the tapes (LTO1) on a
StorageTek L40 Jukebox:
st1: Block limits
LTO4 ($4,600 per drive and $100 per
tape) and LTO 3 ($2,700 per drive and $50 per tape), I would go with LTO3
because you get the same price per GB of data on tape, but spend less money
upfront with LTO3.
You can get an excellent StorageTek SL24 (24 tape slots) autoloader for
$7,000 from Sun, and you
brary.
Jean-Francois Malouin wrote:
* Luc Lalonde <[EMAIL PROTECTED]> [20060811 11:52]:
Hello Folks,
I'm getting this error when I try to use the tapes (LTO1) on a
StorageTek L40 Jukebox:
st1: Block limits 1 - 16777215 bytes
46 matches
Mail list logo
