Stuart,
First thanks for all the work you put into Slackwarearm, it's really
appreciated here.
Just want to let you know that I successfully updated a couple of my
Dockstar with 14.1 RC1. Update is really the wrong word as these were
essentially fresh installs using the installer. This is
Thanks!
Rich Lapointe
On 09/23/2013 12:16 PM, Stuart Winter wrote:
Would it be possible to add the following offsets in the stock
/etc/fw_env.conf file?
Yes I've added it into the config file and it'll be pushed out in the next
batch.
___
ARMedslack
Hi,
Would it be possible to add the following offsets in the stock
/etc/fw_env.conf file?
# Dockstar and Pogoplug offsets:
/dev/mtd00xc0x20x2
I have several Kirkwood based Dockstars and Pogoplugs running
Slackwarearm and I always have to update this
Maybe this will help
http://forum.doozan.com/read.php?2,12045,12045#msg-12045
Rich Lapointe
On 04/22/2013 08:49 AM, Davide wrote:
I decided it was time to pull out the goflexnet and hook up two 2.5
sata drives on it.
I've slackware arm 14 running on it but I can't seem to see anything
like a
One thing I noticed is that u-boot-tools (fw_printenv ... ect) seems
to be missing from the slackware arm 14 repo ... I forgot where I got
it from on 13.37 but on my old armedslack 13.37 it's installed:
u-boot-tools-2010.12rc1-arm-1
It's in the repo
root@pogo-161:/home/rich# slapt-get
Maybe you need a new uboot :
http://forum.doozan.com/read.php?3,6965oot
I use this uboot in my dockstar and 2 pogoplug P21 (E02) kirkwood base
NAS. All three are running Slackwarearm 14.0
I also use these for my serial connection.
On 07/10/2012 11:46 PM, Gregg Levine wrote:
On Tue, Jul 10, 2012 at 5:39 PM, Richrichard.lapoi...@gmail.com wrote:
On 07/10/2012 03:50 PM, Stuart Winter wrote:
Is this device completely supported by the ARM Slackware port?
I guess Stuart would say: it's not a case of porting - it's just
Gregg,
I've got two Pogoplugs, both Pogo P21 that are really E02 versions.
Check the label on the bottom of the stand for the model number.
http://www.jr.com/pogoplug/pe/PGG_POGOP21/
http://www.jr.com/pogoplug/pe/PGG_POGOP21
Same hardware as Dockstars with 256M ram. These are kirkwood base,
On 10/04/2011 01:03 PM, lee jones wrote:
My problem was that normal armedslack needs an nfs install/boot, and I
did try the instructions but I've *never* even used any sort of nfs
install or boot so I found using the miniroot easier. Unless there's
some way of installing via an alternative
Yeah, I got fooled by this. Would had replied but you had it solve before I
finished reading the thread.
BTW, I have three Dockstars all with their own Seagate Freeagent Go drives
running ARMedSlack 13.37RC1 and booting from Doozan's uboot. I also use his
Rescue System. I setup the first
I believe Jeff Doozan uboot is capable of doing this.
http://jeff.doozan.com/debian/uboot/
Rich Lapointe
On Wed, Feb 16, 2011 at 10:37 AM, Stuart Winter m-li...@biscuit.org.ukwrote:
does anybody know if U_Boot already supports loading the kernel of a
UbiFS
partition? I've built U-Boot
I have a Dockstar coming directly from Seagate ($39 USD) and would like
to run ARMedslack on it. Is there a single site that provides
instructions on how I would go about this? Since I am using Salix on my
desktops, I want to replace my N2SLU running SlugOS with the Dockstar
running
12 matches
Mail list logo