/6/2004 00:35
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk Conferencing using g729
Roger,
I haven't had any problems doing confs w/ g729. My guess is the Sipura
is asking for ulaw first. Try adjusting the codec priority on the
sipura side
box100 wrote:
My iax.conf file includes the following under the general section
A SIPURA is a SIP device, configure the codecs under sip.conf not IAX.conf.
disallow=all
bandwidth=low
allow=g729
allow=ulaw
Thanks,
Roger Easlick
Good call Daniel I didn't even notice that.
As far as number of license it really depends on how many concurrent
calls you will be doing and if asterisk needs to transcode at all. If
you call from g729 device to g729 you are fine but g729 to vm would be
1 license etc.
On Mon, 06 Sep 2004
From: [EMAIL PROTECTED] on behalf of William Suffill
Sent: Mon 9/6/2004 15:52
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk Conferencing using g729
Good call Daniel I didn't even notice that.
As far as number of license it really depends on how
Could anyone who has successfully configured Asterisk to
use g729 to conference 10-20 people please post their configs. I purchased and
successfully installed 2 g729 licenses and but when I dial into my conference
number on the Asterisk box from a SPA-2000 set to allow all codecs, it always
[EMAIL PROTECTED]
Date: Mon, 6 Sep 2004 00:28:50 -0400
Subject: [Asterisk-Users] Asterisk Conferencing using g729
To: [EMAIL PROTECTED]
Could anyone who has successfully configured Asterisk to use g729 to
conference 10-20 people please post their configs. I purchased and
successfully installed 2
