: [Asterisk-Users] Confused on G723 and G729
My question is.. if my voip terminator supports G723 and G729
only, do I still need a license?
Or is that considered
pass-through? If so, do I need to do anything special to
get it to work?
It is pass-through if both end points are using G
For instance.. when I try to use G723.1 on my phone (and just call in
from my PRI line) I get:
Unable to find a path from g723 to ulaw.
Unable to find a path from ulaw to g723.
No path to translate from Zap/1-1(68) to Sip/201-80c7(1).
Same things happens if I call in on my current provider's
In your case, where you will need the license is on the box that your
phones register to. For exampe, when someone checks voicemail,
encoding takes place, therefore you need a license.
Look at it this way:
[g729 provider] -(SIP or IAX)--- [g729 asterisk server]
- no license
So
[g729 provider] -(SIP or IAX)--- [g729 asterisk server]
This is how I'd be setup.. actually more like this:
[g729 provider] --(sip) [g729 asterisk
server](sip)---[g711 sip phone client].
So... if I understand this correctly.. I *would not* for *any* reason
On Thu, 2005-04-28 at 11:03 -0400, Matt wrote:
So
[g729 provider] -(SIP or IAX)--- [g729 asterisk server]
This is how I'd be setup.. actually more like this:
[g729 provider] --(sip) [g729 asterisk
server](sip)---[g711 sip phone client].
So... if I
I'll gladly pay $10 a license... I'm all for supporting digium...
however, I was under the impression that there was also some huge one
time fee of like $2,000 or something. I guess I was wrong... ok now
bad..
So I purchase the license from digium... then what happens/what needs
to be done on
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matt
Sent: Thursday, April 28, 2005 8:31 AM
To: Adam Goryachev
Cc: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Confused on G723 and G729
I'll gladly pay
You would need a transcoding license between the Asterisk PBX and the
G711 phone...
On 4/28/05, Matt [EMAIL PROTECTED] wrote:
So
[g729 provider] -(SIP or IAX)--- [g729 asterisk server]
This is how I'd be setup.. actually more like this:
[g729 provider] --(sip)
I see that G723 and G729 require a license to be used, or can be used
(in the case of G723) in pass-through mode only.
My question is.. if my voip terminator supports G723 and G729 only, do
I still need a license? Or is that considered pass-through? If so,
do I need to do anything special to
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Matt
Sent: Wednesday, April 27, 2005 9:43 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Confused on G723 and G729
My question is.. if my voip terminator
10 matches
Mail list logo
