Hi, I did not find any useful information to configure a Wildcard
TDM400P with a FXO card. I've tried everithing, I tried configure it
using the cvs and the information from digium page, I tried to
configure it using
debian packages, I tried to configure with kernels 2.4.30 and 2.6.11, I even
then
Cheers,
Wiley
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gregorio
Toscano
Sent: Monday, April 18, 2005 9:38 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Unable to specify channel 1: No such device
Inline...
Hi, I did not find any useful information to configure a Wildcard
TDM400P with a FXO card. I've tried everithing, I tried configure it
using the cvs and the information from digium page, I tried to
configure it using
debian packages, I tried to configure with kernels 2.4.30 and
On Mon, 18 Apr 2005 11:54:09 -0600
Rich Adamson [EMAIL PROTECTED] wrote:
Inline...
Hi, I did not find any useful information to configure a
Wildcard
TDM400P with a FXO card. I've tried everithing, I tried
configure it
using the cvs and the information from digium page, I
tried to
configure it
It looks like from the ztcfg output that you are trying to reference port
3, which is if your looking at the card with modules up. the one on the
far right.
Move the module to the far left... and that will be channel 1
The far left, is the TOP port on the card.
HIH
Hi, I did not find any
When trying to start asterisk with a four-port
FXS/FXO card I get the following error: "Unable to Specify Channel 1 - no such
device or address" (Channel 1 should be the first FXO port). I looked in the
asterisk-users mailing list archive and found one person who had this problem
but did
Gene Naden wrote:
When trying to start asterisk with a four-port FXS/FXO card I get the
following error: Unable to Specify Channel 1 - no such device or
address (Channel 1 should be the first FXO port). I looked in the
asterisk-users mailing list archive and found one person who had this
Direct from the source (1.0.x)
Here is a list of what module to use with what hardware
Module Name Hardware
tor2T400P - Quad Span T1 Card
E400P - Quad Span E1 Card
wct4xxp TE405P - Quad Span T1/E1 Card (5v version)
TE410P - Quad Span T1/E1
Gene Naden wrote:
When trying to start asterisk with a four-port FXS/FXO card I get the
following error: Unable to Specify Channel 1 - no such device or
address (Channel 1 should be the first FXO port). I looked in the
asterisk-users mailing list archive and found one person who had this
When trying to start asterisk with a four-port FXS/FXO card I get the
following error: Unable to Specify Channel 1 - no such device or address
(Channel 1 should be the first FXO port). I looked in the asterisk-users
mailing list archive and found one person who had this problem but did not
I can't start *. I'm receiving the following error:
[chan_zap.so] = (Zapata Telephony w/PRI)
== Parsing '/etc/asterisk/zapata.conf': Found
Feb 29 19:01:46 WARNING[1024]: chan_zap.c:673 zt_open: Unable to specify channel 1: No
such device or address
Feb 29 19:01:46 ERROR[1024]: chan_zap.c:5324
11 matches
Mail list logo
