Re: [asterisk-users] how many UDP ports is required for 1 call
Does anyone know the correct information of my question. All are move round and round . On Tue, Feb 21, 2012 at 7:28 PM, Kevin P. Fleming kpflem...@digium.comwrote: On 02/21/2012 07:51 AM, Alex Balashov wrote: As many ports as required by the nature of the call, i.e. the protocol(s) used for the bearer. For an IAX2 call, the answer is 'zero' for all of those call types (at least the ones that are supported in IAX2, not all of them are). For protocols that use RTP for media transport, two ports are required for each media stream (one for RTP, one for RTCP). -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com www.asterisk.org -- __**__**_ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/**mailman/listinfo/asterisk-**usershttp://lists.digium.com/mailman/listinfo/asterisk-users -- Thanks and regards Virendra Bhati +91-8885268942 Software Engineer E-mail-: virbh...@gmail.com Skype id:- virbhati2 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
On 02/22/2012 06:26 AM, virendra bhati wrote: Does anyone know the correct information of my question. All are move round and round . What does that mean? I answered your question with the correct and complete information. On Tue, Feb 21, 2012 at 7:28 PM, Kevin P. Fleming kpflem...@digium.com mailto:kpflem...@digium.com wrote: On 02/21/2012 07:51 AM, Alex Balashov wrote: As many ports as required by the nature of the call, i.e. the protocol(s) used for the bearer. For an IAX2 call, the answer is 'zero' for all of those call types (at least the ones that are supported in IAX2, not all of them are). For protocols that use RTP for media transport, two ports are required for each media stream (one for RTP, one for RTCP). -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
Hi Kevin, http://www.freepbx.org/support/documentation/howtos/howto-setup-a-remote-sip-extension this says 4 active ports for one call Regards, Zohair Raza On Wed, Feb 22, 2012 at 4:38 PM, Kevin P. Fleming kpflem...@digium.comwrote: On 02/22/2012 06:26 AM, virendra bhati wrote: Does anyone know the correct information of my question. All are move round and round . What does that mean? I answered your question with the correct and complete information. On Tue, Feb 21, 2012 at 7:28 PM, Kevin P. Fleming kpflem...@digium.com mailto:kpflem...@digium.com wrote: On 02/21/2012 07:51 AM, Alex Balashov wrote: As many ports as required by the nature of the call, i.e. the protocol(s) used for the bearer. For an IAX2 call, the answer is 'zero' for all of those call types (at least the ones that are supported in IAX2, not all of them are). For protocols that use RTP for media transport, two ports are required for each media stream (one for RTP, one for RTCP). -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com www.asterisk.org -- __**__**_ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/**mailman/listinfo/asterisk-**usershttp://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
On 02/22/2012 06:41 AM, Zohair Raza wrote: Hi Kevin, http://www.freepbx.org/support/documentation/howtos/howto-setup-a-remote-sip-extension this says 4 active ports for one call It certainly does. Whether it is accurate or not depends on the definition of 'call', as has already been pointed out in this thread. I could also, definitively and accurately, state that the number of UDP ports required for a 'call' is 5 (five). -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
On 02/22/2012 07:26 AM, virendra bhati wrote: Does anyone know the correct information of my question. All are move round and round . Well, you know Kevin. Whenever I ask him a question, he just moves round and round... -- Alex Balashov - Principal Evariste Systems LLC 260 Peachtree Street NW Suite 2200 Atlanta, GA 30303 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/, http://www.alexbalashov.com/ -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
all your base are move round and round fun idea: house music with lyrics composed of nothing but crazy quotes from asterisk-users! yeah, it's time for coffee #1 John Knight Classic City Telco LLC Email: j...@classiccitytelco.com | Main: (706) 995-0200 Direct: (706) 995-0201 | Mobile: (706) 255-9203 On 2/22/2012 7:52 AM, Alex Balashov wrote: On 02/22/2012 07:26 AM, virendra bhati wrote: Does anyone know the correct information of my question. All are move round and round . Well, you know Kevin. Whenever I ask him a question, he just moves round and round... -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
On 02/22/2012 07:26 AM, virendra bhati wrote: Does anyone know the correct information of my question. All are move round and round . Why don't you make a call, and watch the network traffic with tcpdump, wireshark or similar? Wireshark in particular has an analysis module that will show you a summary of each network conversation by source and destination IP and port and protocol, as well as a handful of analyzers developed specifically for IP telephony. You can then count for yourself how many ports are used for your particular definition and implementation of call, as well as gain a deeper understanding of what happens on the wire. -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
Hi Kevin, I appreciate, that you replyed first and even fast. But you asked for nature of call too. So my question was added with your question . Voice call *How many port of UDP or RTP ?* Video call *How many port of UDP or RTP ?* Fax call*How many port of UDP or RTP ?* T.140 text call* How many port of UDP or RTP ?* As per the reply Voice call is come to 4 ports but rest is not clear. Voice call *4* Video call *??* Fax call*??* T.140 text call* ??* *Will these port of UDP, RPT or Both ?* On Wed, Feb 22, 2012 at 6:08 PM, Kevin P. Fleming kpflem...@digium.comwrote: On 02/22/2012 06:26 AM, virendra bhati wrote: Does anyone know the correct information of my question. All are move round and round . What does that mean? I answered your question with the correct and complete information. On Tue, Feb 21, 2012 at 7:28 PM, Kevin P. Fleming kpflem...@digium.com mailto:kpflem...@digium.com wrote: On 02/21/2012 07:51 AM, Alex Balashov wrote: As many ports as required by the nature of the call, i.e. the protocol(s) used for the bearer. For an IAX2 call, the answer is 'zero' for all of those call types (at least the ones that are supported in IAX2, not all of them are). For protocols that use RTP for media transport, two ports are required for each media stream (one for RTP, one for RTCP). -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com www.asterisk.org -- __**__**_ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/**mailman/listinfo/asterisk-**usershttp://lists.digium.com/mailman/listinfo/asterisk-users -- Thanks and regards Virendra Bhati +91-8885268942 Software Engineer E-mail-: virbh...@gmail.com Skype id:- virbhati2 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
On 02/22/2012 07:01 AM, virendra bhati wrote: Hi Kevin, I appreciate, that you replyed first and even fast. But you asked for nature of call too. So my question was added with your question . Voice call *How many port of UDP or RTP ?* Video call *How many port of UDP or RTP ?* Fax call *How many port of UDP or RTP ?* T.140 text call* How many port of UDP or RTP ?* As per the reply Voice call is come to 4 ports but rest is not clear. Voice call *4* Video call *??* Fax call *??* T.140 text call* ??* *Will these port of UDP, RPT or Both ?* It is clear that you are lacking some basic understanding of how SIP and RTP operate; I would suggest that you take Phil Frost's advice and use Wireshark to watch what actually happens when you place calls on your system. Just some points: UDP and RTP are not exclusive; RTP operates over UDP. Voice calls do not require 4 UDP ports (in most cases). FAX calls rarely use RTP. -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
On 02/22/2012 08:01 AM, virendra bhati wrote: *Will these port of UDP, RPT [assume you mean RTP] or Both ?* It's evident from your response that you do not have a solid understanding of networking fundamentals. The full answer to your question will quickly go out of scope of this list and become an introduction to IP fundamentals. So, I suggest you start by reading these: http://en.wikipedia.org/wiki/OSI_model http://en.wikipedia.org/wiki/Internet_Protocol http://en.wikipedia.org/wiki/User_Datagram_Protocol http://en.wikipedia.org/wiki/Real-time_Transport_Protocol -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
thanks for suggesting the link. Yes i don't have networking, and good SIP communication knowledge. On Wed, Feb 22, 2012 at 6:41 PM, Phil Frost p...@macprofessionals.comwrote: On 02/22/2012 08:01 AM, virendra bhati wrote: *Will these port of UDP, RPT [assume you mean RTP] or Both ?* It's evident from your response that you do not have a solid understanding of networking fundamentals. The full answer to your question will quickly go out of scope of this list and become an introduction to IP fundamentals. So, I suggest you start by reading these: http://en.wikipedia.org/wiki/**OSI_modelhttp://en.wikipedia.org/wiki/OSI_model http://en.wikipedia.org/wiki/**Internet_Protocolhttp://en.wikipedia.org/wiki/Internet_Protocol http://en.wikipedia.org/wiki/**User_Datagram_Protocolhttp://en.wikipedia.org/wiki/User_Datagram_Protocol http://en.wikipedia.org/wiki/**Real-time_Transport_Protocolhttp://en.wikipedia.org/wiki/Real-time_Transport_Protocol -- __**__**_ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/**mailman/listinfo/asterisk-**usershttp://lists.digium.com/mailman/listinfo/asterisk-users -- Thanks and regards Virendra Bhati +91-8885268942 Software Engineer E-mail-: virbh...@gmail.com Skype id:- virbhati2 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
On Wed, Feb 22, 2012 at 6:23 AM, virendra bhati virbh...@gmail.com wrote: thanks for suggesting the link. Yes i don't have networking, and good SIP communication knowledge. Without understanding how they work, an answer to your question can't be provided. Or more succinctly, you can't formulate a question that gives you a useful answer. Maybe we can start with a more basic question centered around exactly what you are trying to do and why? Is the reason for asking because you want to know how many ports to allocate in a NAT router, for example? -- Carlos Alvarez TelEvolve 602-889-3003 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
virbh...@gmail.com wrote: how many UDP ports is required for 1 call. and why . If you mean a voice call, it appears that each host must open three UDP sockets: - One to send/receive SIP commands - Two to receive sound (one for RTP, one for RTCP; The first port is even, the other is odd) This is I think the best answer provided to you so far. The simplest and most relevant I should say. Just to add to that, first port is TCP port and the other two are UDP ports assuming you are using SIP protocol. -Bruce -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
On Wed, Feb 22, 2012 at 5:04 PM, Kevin P. Fleming kpflem...@digium.com wrote: This is the only answer that didn't require the original poster to have to know/learn anything, and thus while it is the 'best' answer, it also doesn't lead to any increased understanding on his part. SIP is most commonly transported over UDP, not TCP. And probably doesn't really answer whatever it is that he really needed to know or do, since how many ports doesn't seem like anything that would be a useful thing to know. Call it SIP trivia. -- Carlos Alvarez TelEvolve 602-889-3003 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] how many UDP ports is required for 1 call
Hi, how many UDP ports is required for 1 call. and why . -- Thanks and regards Virendra Bhati +91-8885268942 Software Engineer E-mail-: virbh...@gmail.com Skype id:- virbhati2 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
On 02/21/2012 07:30 AM, virendra bhati wrote: Hi, how many UDP ports is required for 1 call. and why . A 'call' is too ambiguous to answer your question. Is this a voice call, a video/voice call, a FAx call, a T.140 text call, or something else? -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
right now it's only voice call. But thanks for segregate the call. Now i want to know about all calls used port too. On Tue, Feb 21, 2012 at 7:06 PM, Kevin P. Fleming kpflem...@digium.comwrote: On 02/21/2012 07:30 AM, virendra bhati wrote: Hi, how many UDP ports is required for 1 call. and why . A 'call' is too ambiguous to answer your question. Is this a voice call, a video/voice call, a FAx call, a T.140 text call, or something else? -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com www.asterisk.org -- __**__**_ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/**mailman/listinfo/asterisk-**usershttp://lists.digium.com/mailman/listinfo/asterisk-users -- Thanks and regards Virendra Bhati +91-8885268942 Software Engineer E-mail-: virbh...@gmail.com Skype id:- virbhati2 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
As many ports as required by the nature of the call, i.e. the protocol(s) used for the bearer. -- This message was painstakingly thumbed out on my mobile, so apologies for brevity and errors. Alex Balashov - Principal Evariste Systems LLC 260 Peachtree Street NW Suite 2200 Atlanta, GA 30303 Tel: +1-678-954-0670 Fax: +1-404-961-1892 Web: http://www.evaristesys.com/, http://www.alexbalashov.com On Feb 21, 2012, at 8:30 AM, virendra bhati virbh...@gmail.com wrote: Hi, how many UDP ports is required for 1 call. and why . -- Thanks and regards Virendra Bhati +91-8885268942 Software Engineer E-mail-: virbh...@gmail.com Skype id:- virbhati2 -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] how many UDP ports is required for 1 call
On 02/21/2012 07:51 AM, Alex Balashov wrote: As many ports as required by the nature of the call, i.e. the protocol(s) used for the bearer. For an IAX2 call, the answer is 'zero' for all of those call types (at least the ones that are supported in IAX2, not all of them are). For protocols that use RTP for media transport, two ports are required for each media stream (one for RTP, one for RTCP). -- Kevin P. Fleming Digium, Inc. | Director of Software Technologies Jabber: kflem...@digium.com | SIP: kpflem...@digium.com | Skype: kpfleming 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA Check us out at www.digium.com www.asterisk.org -- _ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to Asterisk? Join us for a live introductory webinar every Thurs: http://www.asterisk.org/hello asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
