Run this command:
tcpdump -pni any -s0 -vvv port 4569 -w /tmp/iax.pcap
Try to authenticate and do calls, after that stop the command and send
to us the file /tmp/iax.pcap that i can see and help you.
If you want add-me at whatsapp
Att,
Hélvio Junior
dCAA - Digium Certified Asterisk
In article <87af2f00-9973-f338-1cbc-9ce0a5bf7...@sys-concept.com>,
wrote:
> Doesn't matter how much I increase the verbose output
> asterisk -vvr
> asterisk will not even print a single line.
Check the settings in /etc/asterisk/logger.conf, for example:
...
From the tcpdump I'd say your asterisk server is talking to Zoiper.
I think Victor suggested turning on "iax2 set debug on". You should see
the raw the messages there. You might even see why Asterisk is refusing
the registration.
Chris
On 05/06/17 07:35 PM, the...@sys-concept.com wrote:
> yes it
yes it does.
netstat -nap | grep 4569
udp0 0 0.0.0.0:45690.0.0.0:*
17375/asterisk
Thelma
On 06/05/2017 03:10 PM, Helvio Junior wrote:
> Use the command bellow to check if is Asterisk opening the port.
>
> netstat -nap | grep 4569
>
> You
There are two different networks connecting in the tcpdump, 10 and 192.
In this example that you send, are you trying to connect from different ips
in different server ips?
Regards,
On 5 Jun 2017 9:23 pm, wrote:
Yes, it is working!
tcpdump -ni any port 4569
dropped
Use the command bellow to check if is Asterisk opening the port.
netstat -nap | grep 4569
You need to see something like this output, otherwise your asterisk is
not opening the port.
udp0 0 0.0.0.0:4569 0.0.0.0:*
10244/asterisk
Att,
Hélvio Junior
Yes, it is working!
tcpdump -ni any port 4569
dropped privs to tcpdump
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
listening on any, link-type LINUX_SLL (Linux cooked), capture size 262144 bytes
14:20:42.184521 IP 10.0.0.108.4569 > 10.0.0.100.4569: UDP, length 53
I think you need to increase verbose output and search in
/var/log/asterisk/full for any error message related to IAX2 registration
or simil.
2017-06-05 17:12 GMT-03:00 :
> No, I don't think it is IP table issue, I've not upgraded dd-wrt for a
> while and it was zoiper
You can use tcpdump in your server to verify if it is receiving the
packets.
tcpdump -ni any port 4569
So you have more than one ip in the server?
On 5 Jun 2017 9:13 pm, wrote:
> No, I don't think it is IP table issue, I've not upgraded dd-wrt for a
> while and it was
No, I don't think it is IP table issue, I've not upgraded dd-wrt for a
while and it was zoiper was working OK with my previous version of asterisk.
After upgrade to 11.25.1 it stop working.
I'm sure port forwarding on dd-wrt is working OK as I have port 80 and
443 open.
Thelma
On 06/05/2017
Another might be to make sure iptables isn't blocking the connection.
You can run
iptables -L -n -v
To see if its set to block any ports.
On June 5, 2017 9:06:55 AM EDT, the...@sys-concept.com wrote:
>I'm getting:
>netstat -a |grep 4569
>udp0 0 0.0.0.0:45690.0.0.0:*
>
No. The 0.0.0.0 listen address is fine.
El 5 jun. 2017 10:06, escribió:
> I'm getting:
> netstat -a |grep 4569
> udp0 0 0.0.0.0:45690.0.0.0:*
>
> Should I be getting localhost IP?
>
> Thelma
>
> On 06/05/2017 06:48 AM, the...@sys-concept.com
I'm getting:
netstat -a |grep 4569
udp0 0 0.0.0.0:45690.0.0.0:*
Should I be getting localhost IP?
Thelma
On 06/05/2017 06:48 AM, the...@sys-concept.com wrote:
> Does asterisk listen on port 4569 by default?
>
> I'm running version Asterisk 11.25.1 and have a problem
Another idea:
* Run netstat -tulpn command on Linux box AND look if there are an Asterisk
process listening on 4569 UDP port on 0.0.0.0
El 5 jun. 2017 10:00, "Victor Villarreal" escribió:
> Dear Thelma,
>
> Yes. Asterisk listen on port 4569 UDP on default config.
>
>
Dear Thelma,
Yes. Asterisk listen on port 4569 UDP on default config.
Please, look at the Asterisk logfile, for clues about your issue. Or enable
IAX2 debug vía Asterisk CLI.
Other ideas:
* Check that your server firewall permit UDP port 4569 incoming traffic.
* Run tcpdump over the network
Is it enabled in the iax.conf file?
Regards,
Marcelo H. Terres
IM: mhter...@jabber.mundoopensource.com.br
https://www.mundoopensource.com.br
https://twitter.com/mhterres
https://linkedin.com/in/marceloterres
On 5 June 2017 at 13:48, wrote:
> Does
16 matches
Mail list logo