Hi
How can you stop static electricity?
An electric charge is produced when two pieces of material are rubbed
together, such as silk and a glass rod, or when you comb your hair. Did you
ever
walk across a carpet and get a shock when you touch a metal doorknob. Your
shoe soles built up a charge
Hi
What causes lights to dim?
If your lights dim when an appliance (fridge, air cond, etc.) comes on,
check to see if the lights are on the same circuit with the appliance. Most
fixed
appliances (fridge, air cond, etc.) should be on a dedicated circuit back to
the main panel. These devices
Hi Ray,
Thanks for the research, it's much appreciated.
I have tried the traditional troubleshooting ideas, starting with the power
first, followed by the A B C's of medicine. They are, airway, breathing and
circulation. This is what medical professionals are taught to look for in an
Hi Max,
As I wrote to Ray, it's not a matter of whether the computer boots or not, I'm
simply not getting power to different components of the computer.
The screen is blank, the hard drive isn't spinning and the hard drive light
isn't lighting up.
I can only assume that there is a power flow
Victor,
Can you get a voltage meter on the terminals where the battery would
connect and see if there is current there when the box is plugged in?
--
Blue skies.
Dan Rossi
Carnegie Mellon University.
E-Mail: [EMAIL PROTECTED]
Tel:(412) 268-9081
Yahoo! Groups
victor,
If nothing comes up on the screen and nothing happens otherwise, only other
thing to try is a boot floppy or CDrom depending on what you have
If that doesn't work,you're fubar.
A continuity tester will be of no use and probably harm on any of those
connectors, even assuming you have the
victor,
It does strike me that a battery with a shorted cell might give similar
results.
I don't know if those things are supposed to run with the battery removed,
if you know for sure, you could try that, but there are
many reasons why that might not work even if the battery is the
problem.
Of
Here is what I did for the mailbox post. Took a 4x 4 x 10' and cut it in
half. Rounded the top cut end of one of the five foot pieces. Measured up 4
foot on that post and cut a groove half way through the thickness of the
post. The width of the 4 x 4 and cut a piece three foot long off the other
Ok ,Ineed help the trap under my sink became un-hooked and Imessed withit
and Ido not know what way the little ring goes as I took it off and .Is it the
small opening down or up , the screw comes down and the treaded part is on the
bottom so I do not know. HELP
tERRIE
[Non-text portions
Hi Terrie,
I am thinking you are talking about the plastic sort of trap?
The ring goes on with the narrow edge down so it is the narrow edge which
fits down into the opening of the 'U' shape. You then thread the nut over
the threads on the 'U' and take care not to cross the threads. Usually
Hi
Follow these steps to determine why your windshield-washer fluid is not
flowing freely, and soon you'll be driving with clean windows again. The
problem
may be something simple like a disconnected hose, or dirt in the spray
nozzle.
Steps:
1.
Turn on the windshield washer with the engine off
Hi
Winter can be rough on cars, so unless you live in a warm or moderate
climate, here's a list of things you can do to make sure your vehicle is
ready for
the upcoming cold season.
Steps:
1.
Don't put off a 30,000-mile full service, if your car is due.
2.
Flush the cooling system and replace
Hi
The tire-changing jack that comes with your car is safe only for changing
tires - any under-the-car work requires the use of jack stands. Jack stands
are
easy to use, but it's imperative that they be placed in the correct position
under the car.
Steps:
1.
Set the parking brake and put the
I purchased a Drill Doctor drill bit sharpener several years ago. It has to be
at least 6 or 7 years. They had just come out on the market not too long
before I bought it. The model that I bought was the one that would sharpen
drill bits up to 3/4. It would make both standard and split
Has anyone ever used the pest controllers that use ultrasound or at least a
high frequency that the pests do not like? I had some from finger hut a wile
back and I see ace hardware and walmart have them too. I have not had any
problem with any pests so far knock on wood.
-Original
15 matches
Mail list logo