Good tips on the site and forums
http://www.meguiars.com/
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Carl
Sent: Friday, September 03, 2010 8:54 AM
To: blindhandyman@yahoogroups.com
Subject: [BlindHandyMan] show room shine
when
here is the site
http://www.diggershotline.com/
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Dan Rossi
Sent: Thursday, September 02, 2010 8:16 AM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] advice putting up a
Motorcycles also use driveshaft's.
The belt that is used for a drive belt on a motorcycle is very similar to a
timing belt in a car. There are teeth that fit in to grooves on the
sprocket. The first time I heard of a belt drive on a motorcycle, I thought
of a fan belt, and I couldn't figure out
yeah, that claim is going to cost you more in the long run now.
if you don't want to spend the money to fix the house, find an insurance
broker, they might be able to find a company to insure you, the way it is,
but your not going to like the price.
If you show your current insurance company
Lime away can be pretty nasty to your skin, so gloves might be in order for
you.
Some shower heads will come apart. You can then clean any extra build up
off screens or whatever might be in there.
A lot of newer ones seem to have rubber tips where the water comes out, and
if yours does, just
i have seen this on framing hammers, and a roofing nail fits nicely in to
the slot.
of course, you kind of have to have an idea of where you want the nail to go
to do it this way.
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of clifford
A quarter inch per every 10 foot.
make sure the roof is level though before hand. if it isn't, you will need
to take that in to account when installing the gutters.
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Tom Vos
Sent:
UPC:
604.11.2 PEX tubing shall not be installed within the first 18 of piping
connected to a water heater.
Of course, if the area adopts other codes, this may be different.
2006 PEX Design Guide:
PEX tubing may be connected directly to residential electric water heaters,
if the local code and
Like these...
http://www.pexsupply.com/Wirsbo-Uponor-A5150750-3-4-Plastic-Bend-Support-212
9000-p
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Alan Terrie Robbins
Sent: Friday, August 20, 2010 7:53 AM
To:
in the run.
As far as to how long a water heater will last depends on the water being
heated. I am on well water and so are others here in my neighborhood. We get
5 to 6 years use from our water heaters/tanks before they spring a leak and
need to be replaced.
- Original Message -
From: Michael
if i understand correct, you want to connect the PEX from the copper
directly to your water heater?
if this is the case, that is a big no no. PEX, or any plastic pipe is not
to be used for direct connection to water heaters.
They actually make flexible water heater lines that are about 2 foot
Sure
Marlin P Jones assoc.
1-800-652-6733
item 16562 te
talking digital multimeter top hand lk-10
http://www.mpja.com http://www.mpja.com
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Peter Mikochik
Sent: Saturday, July 24, 2010
i do not need to with mine,and it is a Kenmore.
just twist and pull. i am guessing there is a valve that is turned when i
have to twist the filter to disengage it.
My ice and water keep working with no filter installed as well.
When replacing one, it is good to run water through the system,
I would cut a section of the copper pipe out, where you want the valve, and
get a ball valve with compression fittings.
Shark bite can supposedly work with about any kind of pipe, but if you have
had luck with compression, why spend the extra money.
Ball valves have little to no restrictions when
Well, here is my $0.02 on the topic.
Figure out what you want the finished height of the floor to be and excavate
as needed. Lot of work. 5 gallon buckets of dirt out of a basement is not
fun, I know from experience.
6 mil plastic on the dirt, and up the edges a few inches, using caulk to
, April 30, 2010 5:57 PM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] Keyless Entry Lock?
Michael,
How do Quickset locks work?
Thanks.
Claudia
- Original Message -
From: Michael baldwin
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com
Sent
take all locks to a lock smith, with the key you want them keyed to. They
can disassemble the lock, and reset the tumblers to work with the key you
want. The key will need to be the same style as the others, so the key you
want to open all locks will need to slide in to the key slot of the lock.
Until I got an old tire machine gave to us, I use to use a bottle jack, and
the front of a 52 Chevy 3/4 ton pickup. I would put the base of the jack
right at the edge of the rim, on the tire, and attempt to jack up the
pickup. It was heavy enough to break the bead loose, on the first shot
instead of using a key, you put in a pass code on a key pad located on the
door, and the door unlocks assuming the correct code was put in.
There is also a key slot, so if the battery dies in the key pad, you can
still use the key to get in.
Michael
_
From:
i have a Whirlpool duet 9400 washer and drier, and they are both very blind
user friendly. There is a big knob you use to select your wash cycle. It
beeps at the normal cycle, so it is just a matter of counting from there.
On and off selections, like extra rinse, have a tone pattern to indicate
cement board under your tile? I'm assuming this is ceramic
tile, is that right?
From: blindhandyman@ mailto:blindhandyman%40yahoogroups.com
yahoogroups.com [mailto:blindhandyman@
mailto:blindhandyman%40yahoogroups.com yahoogroups.com]
On Behalf Of Michael baldwin
Sent: Wednesday, February 24, 2010
it is 0 degrees F out there with a
slight breeze. That would require a load of heat to melt the snow even if
the patio was laid on insulation.
If I was Han Solo I'd probably pet my wookie
- Original Message -
From: Michael baldwin
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com
I installed the SunTouch brand in our last house, and it was great on the
feet. It didn't raise our electric bill by any noticeable difference. I
installed 45 square feet on a 120 volt system. After the tiles were warmed
up, it never really ran that much.
I am now installing it here at our
Nope, this Mike lives in Central Nebraska.
trust me, it has been cold here, and snowy.
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Dan Rossi
Sent: Wednesday, February 24, 2010 8:24 PM
To: blindhandyman@yahoogroups.com
Subject:
The heat is thermatically controlled. So, my wife sets the temp, and we go
with it.
The first instillation at our old house was a primary heat source. We have
45 sq/ft of heating mat installed, and it heated a 135 sq/ft room fine.
this was a bathroom in a basement, and the mats were installed
@ mailto:blindhandyman%40yahoogroups.com
yahoogroups.com [mailto:blindhandyman@
mailto:blindhandyman%40yahoogroups.com yahoogroups.com]
On Behalf Of Michael baldwin
Sent: Wednesday, February 24, 2010 8:51 PM
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com
Subject: RE
. The ambient atmosphere will draw
huge amounts of heat off a surface very effectively.
If I was Han Solo I'd probably pet my wookie
- Original Message -
From: Michael baldwin
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com
Sent: Wednesday, February 24, 2010 9:17 PM
Well I found the specs for my system, and it is 12 watts per sq/ft no matter
if your using 120 or 240 volts.
So for a whole house, it could get kind of spendy if your house is not very
well insulated.
But my system is not designed for a whole house, that system would have
different rating.
Assuming it runs all night, and every night. It only works when it is
snowing out.
the point being, it is not in the thousands of dollar range per month,
unless you have a very large system, or very high electric rates.
_
From: blindhandyman@yahoogroups.com
Well, this is what came to my mind.
Cut 3 pieces of lumber the same length as your pipe.
The width of 2 of the pieces need to be the same as the diameter of the
pipe, and for 1 and 1/2 pvc it should be 1 and 7/8
The 3rd piece will need to be the width of the pipe, 1 and 7/8, plus the
width of your
There are a whole load of things that could cause your problem, but surely
the dealer checked the obvious ones. All the components of the liftgate
system can be checked electronically by the dealer and they can monitor the
status of all the various switches as the liftgate operates. My guess is
Get some of that XPS that is used for insulation, cut to fit, cuts real easy
with a hand saw, push it down the chimney a few inches. Then use some of
that great stuff spray foam on top to make sure it is all sealed up, then
put a chimney cap on it to prevent rain and snow from sitting on top of
No, the tanks are not kept in the house. Maybe in extreme cold temps they
could be kept in some kind of shelter, but normally the propane tank is out
side, or even under ground now, with just the valve and meter sticking above
ground. Federal, state, and local codes dictate where the propane
before. Thanks, Tom
From: blindhandyman@ mailto:blindhandyman%40yahoogroups.com
yahoogroups.com [mailto:blindhandyman@
mailto:blindhandyman%40yahoogroups.com yahoogroups.com]
On Behalf Of Michael baldwin
Sent: Thursday, January 14, 2010 9:11 AM
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com
Dale,
Not to be picky, but propane freezes at -310F, -190C
boils at -44F, -42C.
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Dale Leavens
Sent: Thursday, January 14, 2010 6:51 PM
To: blindhandyman@yahoogroups.com
Subject: Re:
yes they do, they have a combination natural gas and propane detector. A
HomeDepot sales rep was trying to sell me one when I was putting in new
smoke and CO2 detectors in our last house where we had propane. He told me
to hang it on the ceiling in the furnace room, by the furnace and water
: [BlindHandyMan] Blocking the wind.
I got an old 404 not found.
So please tell of it's advantages, disadvantages; and absolute must have
situations.
Thanks
On Mon, 11 Jan 2010, Michael baldwin wrote:
check out this publication, it should help you out.
http://www.building
http
- Original Message -
From: Michael baldwin
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com
Sent: Sunday, January 10, 2010 8:47 PM
Subject: RE: [BlindHandyMan] Blocking the wind.
Liquid nails will eat the foam. You need to use a glue designed for foam,
PL300 is what comes
check out this publication, it should help you out.
http://www.buildingscience.com/documents/reports/rr-0401-conditioned-crawl-s
pace-construction-performance-and-codes/view
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Max
Liquid nails will eat the foam. You need to use a glue designed for foam,
PL300 is what comes to mind.
The tape is house wrap tape.
The xps comes blue, Dow Chemical, and pink, Owens Corning. Around here the
pink tends to be much cheaper, not sure why, the R value of 5 per inch is
the same.
Buy a model that don't use oil.
You can have someone help mark the dipstick at the correct level, then
attempt to feel with your fingers the oil on the dipstick. don't work all
that well for me though.
or
Use a piece of tubing, and blow through one end of the tube as you slowly
lower it in to
I wouldn't say drafty, unless there are holes in your basement that have not
been filled in.
But cooler in the winter, yes.
Research has shown an insolated basement can save up to 30% or so on your
heating bills.
The place to concentrate on first would be the rim joists, the space above
your
I have personal experience with the Logitech Harmony 700, and my advice,
stay away.
it does have some nice features, like what they call activity buttons, so if
you hit watch TV, it turns on your TV, AV receiver, and cable/satellite box.
and it sets the AV receiver to control volume. We, my
The ones I have are wired so if one bulb goes out, the rest still work.
Michael
-Original Message-
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Lenny McHugh
Sent: Tuesday, December 01, 2009 9:17 PM
To: handyman-blind
Subject: [BlindHandyMan] l
Hi,
For my plumbing rough in, what is the best height for the stub outs for the
supply and drain on a bathroom vanity, and for the stub out on a toilet?
Thanks,
Michael
I would almost guess that the peak hp of that motor is 3.5, but the
continuous hp is around 1.5- 2.0.
Which basically means, that if all the right conditions existed, that motor
could put out 3.5 hp. Which, connected to a 20 amp 120 volt outlet won't
happen. Convert it to 240 volt, and then it
I think they are called grid connect systems. Some how it knows that you
are able to get power in to your house, so it either provides your house
with juice, or sends it out to the grid, depending on your usage. When the
power company goes out, the grid connect system knows that, and kills your
Not the same thing.
Kids were smashing the mail box with a ball bat, so the guy filled it with
concrete. The next time they hit the mail box the concrete filled mail box
caused them to lose control of the car and crash and die.
The guy filled the mail box with the concrete to intentionally hurt
@yahoogroups.com
Subject: RE: [BlindHandyMan] additional about spray insilation question.
for some reason this link didn't work for me.
On Mon, 14 Sep 2009, Michael baldwin wrote:
Dale,
You might want to read this report
http://www.building
http://www.buildingscience.com/documents/digests/bsd
reason this link didn't work for me.
On Mon, 14 Sep 2009, Michael baldwin wrote:
Dale,
You might want to read this report
http://www.building
http://www.buildingscience.com/documents/digests/bsd-102-understanding-atti
c science.com/documents/digests/bsd-102-understanding-attic
-ventilation
Spraying the roof deck is not recommended if you live in northern climates.
If you spray the roof deck, you need to completely seal up the attic, no
vents, and you do not need to insolate the attic floor. You are making the
roof part of your conditioned space, so you don't want any air leaks in
Not sure what the code is on that, but I think it has to be secured every 4
foot when ran along the bottom of a joist or rafter, and it needs to be
stapled with in 8 inches of the box. I always just ran it across the floor
of the attic and stapled it every so often, less wire used that way to.
http://soythane.com/
It will cost more then my contractor is charging, but he is using a water
based spray insulation.
http://www.wisnieskiinsulation.com/insulation/spray-foam/
Well, now you all know what part of the country i live in.
Michael
_
From: blindhandyman@yahoogroups.com
PM
To: blindhandyman@yahoogroups.com
Subject: RE: [BlindHandyMan] additional about spray insilation question.
so what's the cost of
Cellulose compared to fiberglass?
On Mon, 14 Sep 2009, Michael baldwin wrote:
Spraying the roof deck is not recommended if you live in northern
climates
--From: blindhandyman@yahoogroups.com
[mailto:blindhandy...@yahoogroups.com] On Behalf Of Dale Leavens
Sent: Monday, September 14, 2009 5:14 PM
To: blindhandyman@yahoogroups.com
Subject: Re: [BlindHandyMan] additional about spray insilation question.
---snip---
If you insulate under the
but it does extend under the basement floor in the addition.
I call it a new addition but it is now about 18 years old.
- Original Message -
From: Michael baldwin
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com
Sent: Monday, September 14, 2009 10:49 PM
Subject: RE
have not had it done yet, but will be done in a few weeks, but in your case,
they have to use a slower expanding foam, or it will blow your walls out.
My walls are open, so they can spray it right in. The spray guy told me he
doesn't do the slower expanding, cause the equipment was very
There is no code for how far the light switch can be away from the door.
But for comfort reasons, you want it no more then a forearms reach in the
door.
When I put switches in, the top is 48 from the ground, and I add a scrap
piece of 2x4 to the 2x4 that is making up the rough opening for the
Any suggestions for punching a 3 and 1/2 inch hole through a solid concrete
wall?
Thanks,
Michael
Didn't know they made a bit that big, but I will check with my closest
rental store 70 miles away. Not sure the 140 miles round trip and lost time
is worth it, but I know how difficult concrete can be.
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On
oops, yep i typed it wrong, that would be a huge house.
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Betsy Whitney
Sent: Wednesday, August 12, 2009 12:48 AM
To: blindhandyman@yahoogroups.com
Subject: RE: [BlindHandyMan] building a house
Shane,
Actually, i wouldn't build a house right now. with the current house
market, you can probably buy something better then you can build for that
price. And if you build, it will probably be worth less than it cost to
build.
that aside, I think building a house would be fun, and I hope to
Thanks for the tips and help with the electric water heater.
I am glad it was mentioned that the wires are live in there. I would have
assumed they would keep the live wires away from any type of adjustments
that need to be made. I turned off the breaker. I didn't locate any way to
adjust the
Okay, my new house has an electric water heater. How do you turn the temp
down. The water is extremely hot. I do not find any adjustment like on a
gas/lp water heater. There are two panels, one at the top, and one at the
bottom of the tank that have 2 screws holding them on. Is the temp
Shane,
Spray foam can be very expensive, there is closed cell and open cell foam.
Open cell spray foam is about R3.6 and closed cell is about R7. Of course,
the R value doesn't tell the hole story, spray foam is superior at blocking
air leaks in to the house.
But with spray foam, you will
Gas or LP models save more then electric models, anytime you use electric
for resistance heating, it costs a fortune. Figure out what size you will
need, then price it out. Tankless do not heat the water to a set temp, i.e.
120 degrees F, it increases the water temp by a certain amount, i.e.
ICF is what I will use when i build a house, unless something better comes
out by then. It cost about 20-25 percent more to build with ICF over 2x6
framing, but the lower utility bills, and the lower cost for using a smaller
heating and air conditioning system that is needed should more than make
Install GFCI's. Or run new wire with a ground 14-2 or 12-2.
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Kevin Doucet
Sent: Monday, July 20, 2009 5:03 PM
To: blindhandyman@yahoogroups.com
Subject: [BlindHandyMan] two prong to a
probably not, but that is the goal. i am going to kind of cheat though. I
will hire contractors for finishing the drywall, plumbing, and tiling.
I am also going to use 12 foot sheets of drywall, so that should go faster
hanging it. Less seems should mean that it won't take the drywall finisher
I think someone was looking for a universal garage door opener on here.
http://www.smarthome.com/7189/Compact-2-Button-Universal-Garage-Remote/p.asp
x
If it wasn't this list, well oops.
Michael Baldwin
Got print, need Braille?
http://www.ReadWithDots.com
Well, I am pretty much finished up with my projects, and now we have to move
to a new house, well it isn't new, and the projects are going to start all
over again.
The house we are moving to was built in 1914, and did not originally have a
bathroom, or electricity. Oh and it is built from
Hi,
I would like to hear from those that have a robotic mower. I am interested
in what brand and model, and your general thoughts and opinions about it.
Thinking of getting one for my new house. The wife mower just doesn't seem
to be working well these days.
Thanks,
Michael Baldwin
Got print
Kind of depends on the level of your main that your going to connect to.
You want your slope from the drain to the main to be 1/4 inch per every foot
of pipe. It can be more, but not less. Going under concrete, your drain
needs to be 2 inch diameter, and they don't make 2 inch bathtub drains, so
Nothing.
Line your first row up with the edge of the roof, then the second row line
the bottom up with the crotch on the row below it. The second row should be
offset from the first about 1/3 the length of the shingle, there is a little
notch on the top that will help with this.
Put nails in each
The one in our van can be programmed for any garage door opener. I can
program up to 4 different ones, including the ones that change frequency for
security reasons.
So, if this is available in a van, they might make a universal portable one.
Michael
_
From:
On
Wed, Jul 08, 2009 at 12:58:48PM -0500, Michael baldwin wrote:
The one in our van can be programmed for any garage door opener. I can
program up to 4 different ones, including the ones that change frequency
for
security reasons.
So, if this is available in a van, they might make a universal
about remote garage door openers
OH BOY, now the thieves can still a Chrysler and brake in to all kinds of
garages..
- Original Message -
From: Michael baldwin
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com yahoogroups.com
Sent: Wednesday, July 08, 2009 2:15 PM
Subject: RE
I just finished tiling a 5 by 4 foot shower, it is a lot of work to tile,
but it can be done by a blind person with good results.
The 4 inch wall tile already has spacers built in, so no spacers are needed.
I believe the 6 inch wall tile has the spacers on the tile as well, you end
up with a 1/16
I have no experience with Milgard windows, but I have heard they are very
good.
36-38 inches is not to wide for a double hung window, as long as it is
taller than that. if it is less then the width high, than a slider would
look better.
Michael
_
From:
I would check to see what is aloud by code in your area. I believe only
rigid metal ducting is allowed.
you can get stainless steal flex gas line though, and that might help you
move your water heater enough to connect the flue.
Michael
_
From: blindhandyman@yahoogroups.com
for the hot that was gfci protected or the
blue
for the hot that was not gfci.
- Original Message -
From: Michael Baldwin mbald...@cableone. mailto:mbaldwin%40cableone.net
net
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com
yahoogroups.com
Sent: Wednesday, April 29, 2009 10:32 AM
Fine threads go in to steel framing members, and the course is for wood, but
the fine thread work well on the wood to.
At least that is what a drywaller person told me.
I just buy a box of 1 and 1/4th for 1/2 drywall, of what ever is less
expensive.
Michael
_
From:
In AC, normally it is the black that is hot, when your talking about 120 v,
with 240 v, it is normally the black and red, if it is three wire, or both
black and white are hot if it is just 2 wire 240 v.
When the white is made hot, it is suppose to be marked with a piece of black
electrical tape.
i am not sure, but my guess is that it would be like an outlet.
With the holes facing you, and the center hole down, the left would be
neutral, center would be ground, and right would be hot.
With the prongs facing you, the left would be hot, center ground, and the
right neutral, again with the
Not even sure why your heat pump is turning on when it is that cold. Unless
things have changed with them, they are about useless under 30 degrees F or
so.
Some have a way of setting the temperature at which it doesn't run. It is
usually located on the heat pump unit itself, some it is a switch,
-
From: Michael Baldwin mbald...@cableone. mailto:mbaldwin%40cableone.net
net
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com
yahoogroups.com
Sent: Monday, February 09, 2009 9:02 PM
Subject: [BlindHandyMan] treadmills
Okay, those that own, or have owned a treadmill. Got a recommendation
Okay, those that own, or have owned a treadmill. Got a recommendation for a
brand and model?
Do you use a special pad under the treadmill to help with vibrations
throughout the house, and to protect the floor?
Doctor is telling me I need to get rid of some of this extra stored up beer,
and a
Hi,
I am planning out my cabinets for my laundry room. Was looking for ideas of
what people wished they had in their laundry room. I will have a single
bowl sink for soaking clothes and such.
Michael
The cheapest is probably the peal and stick vinyl tile. Real easy to put
down. I have seen it for $0.19 per square foot. You can use vinyl tile
glue and it will last longer. Simple to put down, and simple to maintain.
You can find that snap together flooring pretty cheap as well, but I don't
bob,
I want to put the washer and dryer up, but my wife is short, and she does
not want me to. She is 4 10 and 1/2 and I am about 6 foot, and I do most of
the laundry, so I should get it my way, but...
Didn't think of a hanging bar or something. I wonder if someone makes a
retractable clothes
.
Steve
_
From: blindhandyman@ mailto:blindhandyman%40yahoogroups.com
yahoogroups.com [mailto:blindhandyman@
mailto:blindhandyman%40yahoogroups.com yahoogroups.com]
On Behalf Of Michael Baldwin
Sent: Tuesday, January 20, 2009 7:18 AM
To: blindhandyman@ mailto:blindhandyman%40yahoogroups.com
Important to make sure there is not to much bounce in the floor either, or
the tiles will crack and brake, and look like crap in a short time.
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of RJ
Sent: Tuesday, January 20, 2009 10:22 AM
I might get her talked in to it yet, but a foot is about what I was
thinking.
Those stands you can buy to match the washer and dryer are a bit pricy I
think.
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of chiliblindman
Sent: Tuesday,
Porcelain is colored all the way through, so scratches and such are not as
noticeable, as on ceramic.
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of RJ
Sent: Tuesday, January 20, 2009 10:26 AM
To: blindhandyman@yahoogroups.com
Dale,
Is this similar to the system you are talking about for a corner cabinet?
http://www.rockler.com/product.cfm?page=11088
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf Of Dale Leavens
Sent: Saturday, January 10, 2009 9:02 PM
To:
See if you can find a Lindhaus dealer and try one of those out.
They are pretty quiet as far as vacuums go.
They use a bag, but I like bag over bagless anyways, a lot less messy.
Michael
-Original Message-
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On
I vote for flooring first, then the cabinets.
if the kitchen is a square or rectangle, it will be easier to install.
there will be less cuts to make to fit around the cabinets. Some installers
charge more if they have to make more cuts, so it could cost more, just
depends on the installer.
if
. 11 Amp motor producing 1-3/4 Peak HP
. 27,500 rpm single speed motor
. 100% sealed ball bearings
. Dust proof switch
. Lever release height adjustment
. Accurate micrometer depth-of-cut adjustment
. New auto-release collet system
. Precison machined aluminum motor housing and base
The
The ones on the front are normally inputs for hooking up cameras and game
systems. You want output jacks, which are located on the back, or on some
of these new flat panel TV's, on the side.
Michael
_
From: blindhandyman@yahoogroups.com [mailto:blindhandy...@yahoogroups.com]
On Behalf
To hot, to dry, and to many illegals.
i will keep my snow, ice, and tornados.
And it is never to cold for beer, but if you wish to warm the insides, home
made peppermint schnapps warm from the stove does wonders.
Michael
_
From: blindhandyman@yahoogroups.com
1 - 100 of 297 matches
Mail list logo
