Re: [casper] FW: casperfpga screenshots

Hello Kobesky, Jeffrey Recently I installed casperfpga, I fixed the bug and reported it in Github, please do follow it and casperfpga will install. https://github.com/ska-sa/casperfpga/issues/105 --- Thanks and Regards Indrajit Vittal Barve On 2021-08-06 20:44, 'Kobesky, Jeffrey CIV USN

Re: [casper] ROACH1 - ethernet problem.

mmcblk0p1 replace your SD card name --- Thanks and Regards Indrajit Vittal Barve On 2020-04-17 19:24, Ramesh Karuppusamy wrote: Hi Indrajit, Useful to know - I believe I do have our original ROACH1 image somewhere, therefore I will try what you suggested. Thanks! Cheers, Ramesh On 17. Apr

Re: [casper] ROACH1 - ethernet problem.

Dear Ramesh Karuppusamy, This kind of issues we faced several times, We use to do re-write the SD card image. Then it gets resolved. If you want the image for the roach1 I can provide the same. Then you can copy your BOF and run your code. --- Thanks and Regards Indrajit Vittal Barve

[casper] 10Gb packatizer from desktop.

Hello all,I would like to verify a spectromter design. Instead of taking the data from ADC 8bit. I want to feed the data from archive file of 8 bit. So I need to build a packatizer on desktop and send via 10Gbe CX4 and de-packtizer on FPGA. If someone did similar let me know. Looking for

Re: Re: Re: [casper] ROACH Network is unreachable

Hi,Since you are using mmcboot, Using serial terminal / other way you set the ethernet port to a fixed IP address and disable DHCP. You can easily connect to the ROACH with the fixed IP address. Even after every reboot. RegardsIndrajitOn 20 Jun 2019 07:17, zhang laiyu wrote:Hi，Marc, Jack     I

[casper] pattern readout test on X64 ADC using ROACH-1

Dear Casperite's I am doing a basic pattern readout test on X64 ADC using ROACH-1. I select the defined patterns using a external Intel Galileo gen 2 board (For SPI communication). A basic BRAM based burst mode data acquisition is running on FPGA. TDM data out from the ADC yellow block is

Re: [casper] Re: Choice of ADC for 16-element interferometer

Dear Siddharth, The laptop is fine for compiling design, porting bit files.  Good for high time integration  and burst mode design, data transfer through 1Gbe port . thanks Indrajit On 6 Nov 2017 9:15 am, Siddharth Savyasachi Malu wrote:Dear CASPERites,First off,

Re: [casper] Choice of ADC for 16-element interferometer

Dear siddharth, Please go through this message. ADC16 is not (yet?) supported on ROACH1.  So consider with ROACH 2. https://www.mail-archive.com/casper@lists.berkeley.edu/msg06320.html With  regards Indrajit On 20 Oct 2017 11:25 am, Siddharth Savyasachi Malu

[casper] Re: XAUI : Initialization commands cannot be evaluated

the simulink error with the latest commit above.CheersJackOn Sat, 7 Oct 2017 at 07:14 INDRAJIT VITTAL BARVE <indra...@iiap.res.in> wrote:Hello all, Greetings, I downloaded the latest casper mlib-devel  from the https://github.com/casper-astro/mlib_devel Latest commit 0c3f334 I am trying

Re: [casper] QSH I/O as single ended signal.

Thanks Matt dexter, I also got the same page and bank details. But I am looking for the single ended usage. With thanks and regards Indrajit On 11 Jul 2017 8:48 p.m., Matt Dexter wrote:Hi, I've never used the QSH signals as single ended IO. Page 12 of The Roach1