Dear Fazal,
I don't believe the 1GbE block will work for the Red Pitaya as this block
is for Programmable Logic (PL). The Red Pitaya supports a Zynq processor
and so it has a Hard Processor Software region (PS) and PL. The 1GbE is
connected to the Zynq directly and we use AXI Lite interconnect to
Dear Fazal,
We never focused on streaming the data out of the Red Pitaya when we
initially ported it to the CASPER toolflow in 2019. We had to use snap
shots to get the data. Maybe some others have worked on this since then and
can offer better support, but that was the status when I last worked
ered or tried include:
>
>
>
>- Able to ping SKARAB copper port and fiber ports.
>- Set mtu=9000 on my host, per Peralex documentation.
>- Thought of programming SKARAB by hostname instead of IP address, but
>don’t know if it even has a hostname or what it would be.
&
Select the item within the `Hardware Devices` table that is *not *arm***
> . What you have selected will turn blue.
>
> 8) Press `Next` Press `Finish`
>
> 9) A form on the left middle will be `Hardware Device Properties` , listed
> there is `Part:`. That is your FPGA.
Dear June,
I am sorry you are encountering this problem. SKARAB has only been
baselined and fully tested using Python 2.7 for casperfpga. Yes, some
attempts have been made to port it to Python 3.8, but as far as I am aware
there have been issues that were never fully sorted out. It looks like you
Hi Austin,
Here is an invite to the CASPER slack group:
https://join.slack.com/t/casper-astro/shared_invite/zt-1s7l3vt1z-1TdvVDh6Y4ZFRoimzXrUgw
.
Kind regards,
Adam
On Fri, Mar 31, 2023 at 9:28 PM Marc wrote:
> On Fri, Mar 31, 2023 at 6:38 PM Austin Dymont
> wrote:Hello,Hi My name is
Dear Amilcar,
The CASPER group has been in Italy on their annual CASPER workshop. I have
just returned. The others return tomorrow. The guys have worked hard on the
toolflow and are taking some nice relaxing time off.
I am not sure what tutorials you have issues with. I have discovered a
problem
Ciao Morag,
Not Radio Astronomy, but RADAR this time - FORT (FMCW Optical Radar
Tracker) uses ROACH2 and a version of the CASPER Tools. Mike Movius ran
this project - check out my old company
https://www.reutechradar.com/products/defence/tracking-radar.
Con calore,
Adam
On Wed, Aug 31, 2022
hen reports the consolidated results. It
will indicate if the Link fails or not. We have a faulty HMC in our lab and
it is able to detect the fault with this test.
Hope it helps if you have any HMC issues.
Kind regards,
*Adam Isaacson*
Hardware Manager
South African Radio Astronomy Observatory (SARA
Well done, Morag and team! That is a great catch and very helpful to me and
others!
Kind regards,
Adam
On Thu, Jun 9, 2022 at 2:43 PM Morag Brown wrote:
> Hey all,
>
> I had a quick look in the mail archive and didn't see anything on this,
> but it's not impossible others will come
Well done, Kaj, Mitch and Jack! :).
Kind regards,
Adam
On Mon, Feb 28, 2022 at 9:26 PM Kaj Wiik wrote:
> First, I apologize my frustrated tone in my previous messages, those
> resulted
> from months of endless Python package dependency problems,
> incompatibilities
> between Ubuntu and Matlab
Hi Kaj,
We are definitely an open collaboration :). A lot of people have done good
work documenting what we have. This includes Morag and many others. Mitch
has done amazing work and has done his best to document everything, but the
RFSoC is new, so there will be teething issues and we ask for
> (without intention) and suddenly the toolflow is not working anymore. I
>> think it would be very useful if the versions of all Python packages of a
>> working setup would be listed in the documentation.
>>
>> Many thanks to all who support and develop the Casper tool
Hi Casperites,
I hope you are well. I have been reading the mail list and there are lots
of queries about which version of Ubuntu, Python, Matlab and Simulink.
We have documented this quite well on our Casper website, but I have
noticed that some people try it on Windows, different versions and
Hi Kaj and Jack,
I am not sure if this helps or not. We use Ubuntu 18.04LTS, Vivado 2021.1
and Matlab R2019a. Sys generator is no longer available. It now uses the
Xilinx add on Model Composer. Wesley created a "startmc" file to fix this.
I know my startsg did not work. Try our repo:
how it works out :-).
>
> Thanks,
> Kaj
>
>
> On 03/02/2022 07:12, Adam Isaacson wrote:
> > Hi Kaj,
> >
> > Thanks for this. Yes, my wheels fail now, but doesn't seem to be an
> issue. I
> > think Ubuntu 16.04.5 LTS has some python updates, which cause thi
Hi Kaj,
Thanks for this. Yes, my wheels fail now, but doesn't seem to be an issue.
I think Ubuntu 16.04.5 LTS has some python updates, which cause this
issues. I guess as long as we keep track then this is fine.
Creating firmware and installs that work for everyone does come with its
issues.
Hi Jeffrey,
Thanks, this looks spot on.
Kind regards,
Adam
On Thu, 03 Feb 2022, 12:12 AM 'Kobesky, Jeffrey CIV USN NRL ()
Washington DC (USA)' via casper@lists.berkeley.edu, <
casper@lists.berkeley.edu> wrote:
> Hello Nitika,
>
>
>
> I’m not using conda environment so I can’t comment on
Hi Jonathan and others,
A great team effort for all of us. CASPER played a huge role. Well done to
the whole community.
Kind regards,
Adam
On Wed, 02 Feb 2022, 3:33 AM 'Jonathan Weintroub' via
casper@lists.berkeley.edu, wrote:
> https://arxiv.org/pdf/2201.10541.pdf
>
>
>
Hi Indrajit,
Please try this for hardware - it works:
https://github.com/casper-astro/casper-hardware#casper-hardware
I can confirm that I have the same issue with the ADC link. There is
definitely an issue when it comes to all the ADC modules - the only ADC
module I can get to is this:
Dear Eoin,
It has been a while since I played with the cordic algorithm. I used this
for Radar signal processing in the day. The Xilinx should work, but if not
try opencores.org and look for arithmetic operations. Refer to
https://opencores.org/projects/cf_cordic. I can't remember the exact
e once I rerun the workflow.
>
>
>
> It will talk some time until I will get a running project, but I will let
> you know, how I solved it or ask further questions, if I have trouble.
>
>
>
> Best Regards,
>
> Stefan
>
>
>
>
>
> *Von:* Adam Isaacson
> *
Hi Jack and Stefan,
I am not sure if we ever used the SATA connector or rather my memory thinks
not. On top of what Jack has suggested then you will also need to add the
SATA pin outs to the platform yaml file below - you will need to add the
pins of choice here, otherwise the generated top.v
ired classes/methods but also following other conventions in the
> toolflow that make it familiar and extendable.
>
> If you think this may help you I would be interested in hearing your
> thoughts and am happy to get together to go over more of the details and
> help in any way I can.
Great, I will be in touch :).
Kind regards,
Adam
On Mon, 04 Oct 2021, 10:10 PM Jack Hickish, wrote:
> That would be spectacular!
>
> Thanks Adam!
>
> On Mon, 4 Oct 2021, 21:06 Adam Isaacson, wrote:
>
>> Hi Jack,
>>
>> This is exactly what I have been task
Hi Jack,
This is exactly what I have been tasked with. I have a meeting with Grant
Hampson (CSIRO) who has the HBM working in RTL to find out more information
on the 15th Oct.
Maybe we could work together on this?
Kind regards,
Adam
On Mon, 04 Oct 2021, 8:59 PM Jack Hickish, wrote:
> Hi
are integrating with
our CASPER toolflow for now. I will keep you posted.
There are lots of other good presentations ondemand as well, so check it
out!
https://xilinx.cventevents.com/event/f7c4412f-572a-4b8b-b8d0-6b92aae2cf0d/summary
Kind regards,
*Adam Isaacson*
Hardware Manager
South African Radio
Dear Mutsuo and Sebastian,
Here is the CASPER hardware Red Pitaya board list - we only support 125-10
and the original 125-14. The rest will need to be added, but as Wesley said
we are focusing on the Alveo boards right now. We will gladly assist you if
you wish to target a new board. I would
Dear Casperities,
I can't remember if I published anything officially, but I finally
installed my desktop with OS Ubuntu 18.04LTS to work with the current
toolflow and the planned new toolflow. I am about 6 months behind
publishing this, but I can now say that the toolflow for SKARAB and the Red
and
>
> $ python -m pip
>
> instead of
>
> $ pip
>
>
>
> In my experience, this command format has allowed pip to search
> dependencies and install packages to the intended python (the same python
> referred to by "python" in the command line).
Hi Jeff,
Please see my feedback in red below.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Tue, May 4, 2021 at 4:34 PM 'Kobesky, Jeffrey CIV USN NRL ()
Washington
t;
> Vivado 19.1.1
>
> MATLAB 2018a
>
> mlib_devel branch: master
>
> Python 2.7 and 3.6, running in (casper_venv)
>
> Devices: Red Pitaya, SKARAB
>
>
>
>
>
> *From:* Adam Isaacson
> *Sent:* Thursday, April 15, 2021 3:53 AM
> *To:* Casper Lis
. If it works
then we will update the documentation - this is what CASPER is about =
collaboration!
Great to have your energies Jeff.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac
once defined.
Just a reminder of our CASPER conference that is taking place the week of
the 17th May via Zoom and is completely free! If interested please check
out:
https://casper.berkeley.edu/index.php/meetings-workshops/
Sorry for the additional advertising! ;)
Kind regards,
Adam Isaacson
!
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Tue, Apr 13, 2021 at 4:36 PM 'Kobesky, Jeffrey CIV USN NRL ()
Washington DC (USA)' via casper@lists.berkeley.edu <
cas
Hi Xin,
Thanks for letting us know - it is useful to have the feedback. I think the
gratitude must go to Morag here :).
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Tue
that maybe worked,
but it is up to you. Try with the wheel issue and let us know.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Fri, Mar 26, 2021 at 4:41 PM Xin Cui wrote:
-
needs some tweaks. I can say that python 2.7 casperfpga works just fine for
SKARAB though.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Mon, Mar 22, 2021 at 3:53 PM
, but it might take a long time. A
lot of our CASPER DSP libraries have been around a long time and it
wouldn't make sense to get rid of them yet.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac
the keyboard with my head several times I realized that pip
> was pointing to python3,
> so, using pip2 did the trick..(still with the same issue, I'm
> going to the shame corner for a while)
>
> Again thanks Adam and all for the comments.
>
>
>
>
>
>
>
>
&g
uot;import casperfpga", I put the
> complete error in a txt file with it, for (I hope) a better clarity.
> The ipython is executed from my home directory.
>
> Thanks again,
>
>
>
>
> El vie, 12 feb 2021 a las 14:01, Adam Isaacson ()
> escribió:
>
>> Hi Guill
some time for me to look at this further until my development
is setup and working properly.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Fri, Feb 12, 2021 at 6:09 PM
ion do you read back?)
4) What githash of casperfpga are you using?
5) Send screen captures - this helps with debugging!
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Fr
on
ZCU111. I would also ask Wei Liu who did some excellent work on the ZCU111
- alas, I don't have his new email address.
My other suggestion is that you create a new CASPER email thread regarding
the ZCU111 - people might miss your request.
Good luck!
Kind regards,
Adam Isaacson
South African Radio
nctioning now. Time for a beer maybe? ;)
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Wed, Feb 3, 2021 at 12:11 PM Adam Isaacson wrote:
> Hi Kaj,
>
> Okay, at lea
I will compile the "test_snap.slx" on my side and let you know if it fails.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Wed, Feb 3, 2021 at 11:30 AM Kaj
s
>
> If I find what the actual problem was I'll let you know.
>
> Thanks!
>
>
>
> El mar, 2 feb 2021 a las 3:05, Adam Isaacson ()
> escribió:
> >
> > Hi Guillermo,
> >
> > Interesting. Please send me the following:
> >
> > 1) screen
o the users can just
start. A few years back we investigated containers, which are much smaller
hard disk wise. Alas, we had issues getting the container to work on other
machines. VMs are bulky, but may be the best answer. We will discuss during
the next CASPER meeting.
Kaj, I think you are clo
Hi Guillermo,
Interesting. Please send me the following:
1) screen capture of the errors you get before you do
"update_casper_blocks".
2) please attach your R2016a slx file
3) please attach your new saved R2018a slx file.
I will then investigate and get back to you.
Kind regards,
Adam
On
s://casper-toolflow.readthedocs.io/en/latest/src/Configuring-the-Toolflow.html
2)
https://casper-toolflow.readthedocs.io/en/latest/src/Running-the-Toolflow.html
Let me know what you get.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
hardware
platforms and make sure that they are still functional before we say Ubuntu
18.04 is good to go :).
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Fri, Jan 29, 2021
and build your designs :). Hooray!
NB: I am now going to commit and do a pull request for casper-astro to
review.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Thu, Jan 28,
t worry, I will
be committing this change once I have done a bit more investigation - maybe
adding versions in requirements.txt is not a bad idea for future support.
You can now start your matlab session and build your designs :). Hooray!
Kind regards,
Adam Isaacson
South African Radio Astronom
and Vivado 2020.2.
I think this is something we should discuss at the next CASPER meeting on
the 11th Feb. We should allocate a resource for this, but SARAO is focusing
on other areas for now.
Thanks for your email :).
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO
rc/Running-the-Toolflow.html
6) https://casper-toolflow.readthedocs.io/projects/casperfpga/en/latest/ (This
is how to install casperfpga)
@Jonathon Kocz : we will need to update the docs to
reflect this new information. I will wait until both parties have working
systems before updating the Read
p terminal screen capture, so we can see if you are doing everything
correctly, thanks.
I hope this helps!
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Sun, Jan 24, 2021 at 7:
Hi Casperites,
For those of you that want to join the CASPER slack group and haven't yet
then here is a general invite -
https://join.slack.com/t/casper-astro/shared_invite/zt-l6cfvyt2-ZRkrj2UZV_sX_iKO_Vr95A.
It is valid for 31 days.
Kind regards,
Adam Isaacson
South African Radio Astronomy
address, but maybe Dan W has his
new address?
Good luck!
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Wed, Jan 20, 2021 at 10:22 PM Dan Werthimer
wrote:
>
>
regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Wed, Jan 20, 2021 at 6:49 PM Jack Hickish wrote:
> Hi Kaj,
>
> I think there are a few options
>
> 1. Get python >
Hi Dave,
Happy New Year to you too! Thanks for the article. I thought I would share
this one with the community on the Xilinx Versal ACAP
-
https://www.eejournal.com/article/why-does-xilinx-say-that-its-new-7nm-versal-acap-isnt-an-fpga/
In Xilinx's words they are a platform company and no
regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Thu, Oct 15, 2020 at 6:46 PM Sean Mckee wrote:
>
> Hello Casperites,
>
> I was looking at the new Red Pitaya board that
Hi Paul,
Glad you came right! @Mathews: thanks for supporting Paul!
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Mon, Sep 21, 2020 at 12:08 PM Paul Akumu wrote:
>
going forward - always use the versions as
specified in the readthedocs first!
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Wed, Sep 9, 2020 at 8:10 AM Xavier Bosch
wrote
Thanks, Jonathon. It is possible I sent in a SR to Xilinx at the time. We
should probably be using Vivado 2020.1 - contains other sysgen fixes.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac
Hi Paul,
I have spoken with my colleague Mathews Chirindo who will be investigating
this further for you. He made the most recent changes to the toolflow and
tested the tutorials for the Red Pitaya recently. He will give you feedback
on this thread.
Kind regards,
Adam Isaacson
South African
Hi Paul,
Thanks, I will investigate further and get back to you.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Thu, Aug 27, 2020 at 10:49 PM Paul Akumu wrote:
>
ontain the latest Red Pitaya fixes. If the problem still
persists then I will investigate further. I just want to make sure that we
have merged all the relevant fixes in the casper-astro repo from the ska-sa
repo.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manage
. Correct me if
wrong!
Please try and rebuild the spectrometer slx file and test the fpg generated
file. Let me know if you get the same issue. If you don't then I must have
checked a suspect fpg file in this repo and we can easily fix that, if that
is the case.
Kind regards,
Adam Isaacson
South African
Hi Xavier,
Okay, great! I am glad you sorted it out.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Wed, Aug 5, 2020 at 8:13 PM Xavier Bosch
wrote:
> Hi A
the versions
specified in the toolflow ReadtheDocs first before trying different
versions?
Good luck!
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Tue, Aug 4, 2020 at 5:35 PM
diagram in all configurations. I am going into
weekend mode now, so will be happy to respond to any new questions on
Monday :).
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Fri
nts that can be
made then why not make them and send a pull request for reviewing - CASPER
encourages this and is always looking for new developers :). I am happy to
support you in investigating your timing issues, so feel free to send me
your design if you are allowed to share it.
Kind regards,
to be. It makes sense to use a
lower clock frequency for this. We were running the SKARAB comms interface
at 156.25MHz and in the end dropped this to 40MHz, so that we could meet
timing.
I hope this helps.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware
timing.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Fri, Jul 3, 2020 at 5:46 AM Sebastian Antonio Jorquera Tapia <
sebastian.jorqu...@ug.uchile.cl> wrote:
>
Pitaya.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Mon, Jun 1, 2020 at 8:12 PM Wesley New wrote:
> Hi Sean.
>
> progska is a c utility that we use to
also used a Raspberry Pi for this type of application in the past
and it works well for data logging. Good luck!
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Wed, May 20
://github.com/ska-sa/casperfpga/tree/python3-port
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Thu, May 7, 2020 at 2:38 AM Wael Farah wrote:
> Hi Sean,
>
> I might
Hi Aravind,
No worries. It applies equally to existing designs. The hardware porting
workshops are an annual event, so you will at some point get a chance to
participate if you want to.
Good luck!
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
a decent understanding of
casperfpga and they can support.
I hope this helps. We are currently CASPERsing the Xilinx Alveo Data
Accelerator Card U280, so are going through a similar exercise. I am happy
to move this conversation to slack.
Good luck!
Kind regards,
Adam Isaacson
South African Radio
1.
I hope this helps!
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Thu, Apr 16, 2020 at 9:08 PM Aravind Venkitasubramony <
aravind.venkitasubram...@colorado.edu&
nd scripts under
> /mlib_devel/jasper_library/scripts - Is this correct?
>
> Also, I had saved the first two tutorial files also outside mlib-devel and
> I did not face any issues there. Is this expected?
>
>
> On Thu, Apr 16, 2020 at 12:38 AM Adam Isaacson
> wrote:
>
&g
I am sure your core_info.tab,
which is in the project folder is not being generated with the correct
number of bytes.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
d do a new git clone of the casper-astro/mlib_devel. Please see
https://casper-toolflow.readthedocs.io/en/latest/src/Installing-the-Toolflow.html
<https://casper-toolflow.readthedocs.io/en/latest/src/Installing-the-Toolflow.html>
and
follow instructions.
Kind regards,
Adam Isaacson
Sou
Hi Aravind,
The pull request in casper-astro/mlib_devel was just approved - try that
and let me know, thanks. This should sort your issue out.
https://github.com/casper-astro/mlib_devel
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27
https://github.com/casper-astro/mlib_devel/pull/123. We were unable to
support any BRAM size other than 32 bits originally. I am now pleased to
report we can support all sizes again.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 8256396
n more detail. You can also contact the Red Pitaya
support engineer Nicu Irima (email: nicu.iri...@redpitaya.com) who will
assist you.
I have also invited you to the CASPER Red Pitaya slack group - feel free to
post your questions there too.
Kind regards,
Adam Isaacson
South African Radio Ast
u said, downloaded all the
> files in the location you had suggested, cd'ed in to the new folder and
> installed casperfpga as mentioned in the tutorial. I am able to connect to
> the red pitaya board, the led is blinking and everything, but get the
> similar error as before when reading
Traceback (most recent call last)
> in ()
> > 1 casperfpga
>
> NameError: name 'casperfpga' is not defined
>
> I am afraid if I have messed up the casperfpga installation. Is there a
> way to clean up all the casperfpga related files and install afresh?
>
>
>
> On
, thanks.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Tue, Apr 7, 2020 at 8:30 PM Aravind Venkitasubramony <
aravind.venkitasubram...@colorado.edu> wrote:
> Th
pleted slx
model and working fpg file for each tutorial.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Tue, Apr 7, 2020 at 10:28 AM Adam Isaacson wrote:
> Dear Aravind
going to look at your file and see if I can spot
anything. Stay tuned.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Tue, Apr 7, 2020 at 1:53 AM Aravind Venkitasubramony
if they are correct. Send that to me and I will glance over it.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Tue, Apr 7, 2020 at 1:04 AM Aravind Venkitasubramony <
ar
Thx, Marc!
On Sun, 05 Apr 2020, 11:10 AM Marc, wrote:
>
>
> On Sat, Apr 4, 2020 at 2:55 PM Adam Isaacson wrote:
>
>> Hi Aravind,
>>
>> Yes, you need casperfpga to configure the Red Pitaya. The tutorials
>> explains how to use casperfpga. The Zynq proce
asubramony, <
aravind.venkitasubram...@colorado.edu> wrote:
> Ok. So I need to install casperfpga in my Linux machine which will be the
> "server" in my case and proceed further with the next steps. Am I right?
>
> On Fri, Apr 3, 2020 at 3:38 AM Adam Isaacson wrote:
&g
connector on the board e.g.
rp-f04702.local". If you ping that you should get a response.
To install casperfpga and run it check out the Readme.md :
https://github.com/casper-astro/casperfpga.
Shout if any questions.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (
>
> Cheers
> Jack
>
> On Thu, 13 Feb 2020 at 12:43, Adam Isaacson wrote:
>
>> Hi Lukas,
>>
>> Excellent, please thank Alex Raymond and not me. @Alex, much appreciated!
>>
>> The Zynq device on the Red Pitaya is a small one and I believe that the
>>
Do you happen to know if it is possible to compile
> .fpg files for the Red Pitaya using only Vivado WebPack.
> At the moment I'm using a 30 day evaluation license and I am wondering if
> compiling .fpg files will still work after it runs out.
>
> Adam Isaacson hat am 11. Februar 2020
step should be
successful, so if this doesn't work then there is an issue with your setup.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Wed, Feb 12, 2020 at 10:00 AM Lukas Karch wrote:
>
ow you progress.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Tue, Feb 11, 2020 at 10:06 AM Adam Isaacson wrote:
> Hi Lukas,
>
> 1) Did you install casperfpga usi
p.html>
.
Kind regards,
Adam Isaacson
South African Radio Astronomy Observatory (SARAO)
Hardware Manager
Cell: (+27) 825639602
Tel: (+27) 215067300
email: aisaac...@ska.ac.za
On Tue, Feb 11, 2020 at 9:48 AM Lukas Karch wrote:
> Thank you for the quick response. I tried specifiying t
1 - 100 of 181 matches
Mail list logo