Re: [casper] ROACH1 serial to USB connection

This is a bit hazy, but I think that might be because the processor hasn't stopped properly - some permutation of rebooting, unplugging and pressing the halt button on the GUI repeatedly sometimes helps. Also check if the processor isn't running in an overclocked configuration regards marc On

Re: [casper] ROACH1 serial to USB connection

Hi Jason Its really no problem. I used the steps that you have send me with a ST-link V2 J-TAG (It is almost like the USB wiggler). I can open up a serail connection with Hyperterminal and open up an connection with the OCD Commander. Once i run the Macro I get the following error: Write large:

Re: [casper] ROACH1 serial to USB connection

Heystek, Sorry for the delay in replying. I'm not sure about the converter script. Every time I've debricked a roach, I used our USB wiggler, and followed these steps:

Re: [casper] ROACH1 serial to USB connection

Hi Jason I got my hands on a JTAG. I went through the CASPER debricking tutorial page but I dont understand how to use the converter script? Do you perhaps know how to use it? Thanks for all of your help Heystek On Mon, Mar 27, 2017 at 11:54 AM, Heystek Grobler

Re: [casper] ROACH1 serial to USB connection

Hi Jason The ROACH1 is a brand new board that we just unboxed. I tried connecing to it using two diffirent serial to usb cables and both gave the same result, a connection to the board, but the terminal only displays a black screen. No Uboot sequence or any kind of output. I will double check by