,
facilities people can change things and you'd never know until it's too
late...
Ed
-Original Message-
From: CCP4 bulletin board [mailto:CCP4BB@JISCMAIL.AC.UK] On Behalf Of
Andreas Förster
Sent: Thursday, July 24, 2014 10:54 AM
To: CCP4BB@JISCMAIL.AC.UK
Subject: [ccp4bb] rigaku micromax 007 cooling
Dear all,
I have a Rigaku MicroMax 007 HF X-ray generator that is cooled by
chilled water supplied rather unreliably through the building
infrastructure. I was wondering what alternatives exist.
Could other MicroMax 007 users share their experiences with alternative
cooling solutions with
Dear Andreas,
we had a similar issue with our MicroMax 007, with a primary water/water
chiller (ATC K3) in between the generator and a secondary inhouse water
circuit.
After a year of reliable service the K3 would shut off occasionally and dump
the 007 with a cooling error. We found that
Dear Andreas,
We have a Hyfra water cooled system (VWK50) on our MicroMax 007,
but it is probably over-dimensioned
because it is also used by a Xstream equipment, a smaller dedicated
cooler to the micromax could be better.
Daniel
Le 24/07/2014 17:53, Andreas Förster a écrit :
Dear all,
to pull the water
through.
Kris
Kris F. Tesh, Ph. D.
Department of Biology and Biochemistry
University of Houston
From: Han Remaut han_c...@yahoo.co.uk
To: CCP4BB@JISCMAIL.AC.UK
Sent: Thursday, July 24, 2014 11:07 AM
Subject: Re: [ccp4bb] rigaku micromax 007
Thermo scientific has air/water chillers. Google:
thermo scientific neslab merlin recirculating chillers
brings up the links.
We have one of these cooling an Oxford xcalibur.
It supplies circulating cold water under pressure which
we hook up where the house chilled water would go on
the
Hi Andreas -
My 007HF is cooled by a Haskris R050 chiller which I got from Rigaku.
This has a refrigeration loop inside it to extract heat from the closed
water loop that goes to the generator; the extracted heat can then go to
building chilled water, or even an open loop (city cold water,
: CCP4 bulletin board [mailto:CCP4BB@JISCMAIL.AC.UK] On Behalf Of
Andreas Förster
Sent: Thursday, July 24, 2014 10:54 AM
To: CCP4BB@JISCMAIL.AC.UK
Subject: [ccp4bb] rigaku micromax 007 cooling
Dear all,
I have a Rigaku MicroMax 007 HF X-ray generator that is cooled by chilled
water supplied rather