Chan Chung Hang Christopher wrote:
Phil Schaffner wrote:
...
Thanks, please also consider changing the title. Nothing about it tells
you that the instructions are for first time install only. Perhaps
adding instructions for switching to console during install time will
reinforce that fact
Brian Mathis wrote:
On Thu, Aug 13, 2009 at 10:06 AM, Phil
Schaffnerphilip.r.schaff...@nasa.gov wrote:
... but left /dev/sda and /dev/sdb in
place as changing to /dev/sdX|Y looked very awkward to me.
...
Phil
That's exactly the point of using something like X/Y. It stands out
and looks
Hello
I am curious about some articles I would like to contribute to the
wiki. I would like to add some articles about installing games, like UT,
Quake3 with the Urban Terror mod and Enemy territory. The question I
have is are these articles something that the group would like on the
wiki ? I
On Mon, Aug 17, 2009 at 9:21 AM, Phil
Schaffnerphilip.r.schaff...@nasa.gov wrote:
Brian Mathis wrote:
On Thu, Aug 13, 2009 at 10:06 AM, Phil
Schaffnerphilip.r.schaff...@nasa.gov wrote:
... but left /dev/sda and /dev/sdb in
place as changing to /dev/sdX|Y looked very awkward to me.
...
Phil
Phil Schaffner wrote:
Chan Chung Hang Christopher wrote:
Phil Schaffner wrote:
...
Thanks, please also consider changing the title. Nothing about it tells
you that the instructions are for first time install only. Perhaps
adding instructions for switching to console during
CentOS Errata and Bugfix Advisory 2009:1192
Upstream details at : https://rhn.redhat.com/errata/RHBA-2009-1192.html
The following updated files have been uploaded and are currently
syncing to the mirrors: ( md5sum Filename )
x86_64:
0312d296a65296a06433456b12439956
CentOS Errata and Bugfix Advisory 2009:1191
Upstream details at : https://rhn.redhat.com/errata/RHBA-2009-1191.html
The following updated files have been uploaded and are currently
syncing to the mirrors: ( md5sum Filename )
i386:
0b2e3a013f24fae31ddfdd345ec83e4c
CentOS Errata and Bugfix Advisory 2009:1196
Upstream details at : https://rhn.redhat.com/errata/RHBA-2009-1196.html
The following updated files have been uploaded and are currently
syncing to the mirrors: ( md5sum Filename )
i386:
a8f767570423dfe431059ac4355abddd
CentOS Errata and Bugfix Advisory 2009:1196
Upstream details at : https://rhn.redhat.com/errata/RHBA-2009-1196.html
The following updated files have been uploaded and are currently
syncing to the mirrors: ( md5sum Filename )
x86_64:
ca2a5da4e2aeca1b227a45a4950d9001
CentOS Errata and Enhancement Advisory 2009:1214
Upstream details at : https://rhn.redhat.com/errata/RHEA-2009-1214.html
The following updated files have been uploaded and are currently
syncing to the mirrors: ( md5sum Filename )
x86_64:
41cc9ab18b5946b7915ea7641aa3ac96
On Mon, 17 Aug 2009 02:41:49 + (GMT)
Juan Manuel R. juan...@yahoo.es wrote:
Saludos Lista:
Como parte del mejoramiento continuo de los trabajadores de la
empresa, se me ha encomendado instalar un programa o curso de
mecanografia (dactilografia) en el servidor web de la compañia.
hum,
On Mon, 17 Aug 2009 07:15:29 +0200
Ramón Cervantes rcervan...@sinergium-sgh.com wrote:
Hola,
Tengo un servidor con centos 5.2, y ahora me piden que una aplicación
hecha para Windows se ejecute en dicho servidor.
Por lo que he leído en este foro, con Xen o VMware es posible hacerlo
Buenas tardes:
Me explico, estoy probando que todos los mensajes que se envían a
/var/mail/root me lleguen a un correo, muy bien, he hecho la prueba con
echo Hola | mail -s Asunto root
y me llega sin problemas, el caso, es que quiero provocar algo para que me lo
envíe él, es decir, lo típico
2009/8/17 Monica BM monica...@yahoo.es
Buenas tardes:
Me explico, estoy probando que todos los mensajes que se envían a
/var/mail/root me lleguen a un correo, muy bien, he hecho la prueba con
echo Hola | mail -s Asunto root
y me llega sin problemas, el caso, es que quiero provocar algo
En realidad lo que quiero es provocar qeu el sistema mande un mensaje a root.
Pero lo mismo con lo que me has comentado me sirve.
Muchas gracias.
De: Eduardo Grosclaude eduardo.groscla...@gmail.com
Para: centos-es@centos.org
Enviado: lunes, 17 de agosto, 2009
El 17 de agosto de 2009 09:35, Eduardo Grosclaude
eduardo.groscla...@gmail.com escribió:
2009/8/17 Monica BM monica...@yahoo.es
Buenas tardes:
Me explico, estoy probando que todos los mensajes que se envían a
/var/mail/root me lleguen a un correo, muy bien, he hecho la prueba con
echo
Finalmente me sirvió, simplemente ejecuté el comando logwatch y acto seguido
mandó un mail a root que me llegó a mi, que es lo que quería.
También lo intenté con el crontab pero lo puse mal y nuevamente me mandó un
correo diciéndome que estaba mal.
Así que perfecto.
Mjuchas gracias por
Hola
Necesito crear acls para permitir el acceso a un servidor a determinadas
maquinas que se encuentran en redes distintas..todo esto lo quiero hacer con mi
maquina que tiene CentOS5, para que funcione como router
_
Connect to
Cristhian Tinoco wrote:
Hola
Necesito crear acls para permitir el acceso a un servidor a determinadas
maquinas que se encuentran en redes distintas..todo esto lo quiero hacer
con mi maquina que tiene CentOS5, para que funcione como router
Comando ¿route?
Saludos,
David
--
Hola,
Como router, obviamente, acompañarlo de rutas y para filtrar, iptables
Saludos, Sebastian
El 17 de agosto de 2009 16:40, Cristhian Tinoco
chichan_...@hotmail.comescribió:
Hola
Necesito crear acls para permitir el acceso a un servidor a determinadas
maquinas que se encuentran en
2009/8/17 Cristhian Tinoco chichan_...@hotmail.com:
Hola
Necesito crear acls para permitir el acceso a un servidor a determinadas
maquinas que se encuentran en redes distintas..todo esto lo quiero hacer con
mi maquina que tiene CentOS5, para que funcione como router
Gracias por el hilo,
Una pregunta, ¿Wine soporta el acceso de varios usuarios simultáneos para
ejecutar la aplicación de Windows?
gracias
Ramón Cervantes
Consultor
Móvil 657 86 35 46
rcervan...@sinergium-sgh.com
www.sinergium-sgh.com
P Antes de imprimir este mensaje, por favor, compruebe
Chuck wrote:
I recommend a highly secured master that is not queried by any clients
(preferably in a network/vlan your clients can't even access)... then
configure one-way zone transfers to 2 or more slave servers which you
configure your clients to point to. Maintain your zone files in
Dave,
If you only going to answer the OP's questions and not make further
points on replies, please reply to the OP's message directly.
Dave wrote:
On Sun, Aug 16, 2009 at 4:39 AM, Chan Chung Hang
Christopherchristopher.c...@bradbury.edu.hk wrote:
So I started looking around in /var/log.
Jason Pyeron pisze:
Any ideas why bind is putting the tmp files in the [chroot]/var/named
directory
and not in /tmp or /var/tmp?
Try change it in /var/named/chroot/etc/named.conf bot what for?
And put 'ENABLE_ZONE_WRITE=yes' in /etc/sysconfig/named
Radek
Hello,
I'm running centos 5.3 with the priority plugin enabled. One of my
3rd party repos has updated httpd and php packages that i want to get,
however it won't overwrite the base packages of httpd* and php* since they
were installed from base. How can i update just these specific
On Mon, Aug 17, 2009 at 2:03 AM, Bart Schaeferbarton.schae...@gmail.com wrote:
On Sun, Aug 16, 2009 at 3:50 PM, Rudi Ahlersrudiahl...@gmail.com wrote:
A client of ours just requested to increase the max_recipients in Exim
to 300, since he keeps getting 554 Too many recipients error when
Han mo wrote:
Hello everyone,
does anyone install the oracle on the centos?
I try to install the oracle on my computer. but fail.
It has problem on kernel setting and add the swap disk.
___
CentOS mailing list
CentOS@centos.org
Rudi Ahlers wrote on Mon, 17 Aug 2009 09:05:34 +0200:
I'll see if I can convince the client to use an alternative method of
doing this.
- mailing list
Kai
--
Kai Schätzl, Berlin, Germany
Get your web at Conactive Internet Services: http://www.conactive.com
Dave wrote on Mon, 17 Aug 2009 02:36:39 -0400:
How can i update just these specific packages
httpd* and php* without changing my priority options?
You have to exclude them from base and updates.
Kai
--
Kai Schätzl, Berlin, Germany
Get your web at Conactive Internet Services:
Hello List,
I've got a somewhat weird question. Let me tell you what my intent is first:
We're running a set of Dell boxes with CentOS 4. Some of them use
OpenVPN. As we need to monitor the system status of these boxes, we use
the Dell supplied OMSA package. As it turns out, OMSA totally breaks
How can I create a tun device without using any add on packages using
only software contained in CentOS?
Just your kernel :) Support is built in. Manipulation of and other commands
might need additional software though...
___
CentOS mailing list
-Original Message-
From: centos-boun...@centos.org
[mailto:centos-boun...@centos.org] On Behalf Of Joseph L. Casale
Sent: Monday, August 17, 2009 5:35
To: 'CentOS mailing list'
Subject: Re: [CentOS] How to create a tun-device with CentOS
packages only?
How can I create a tun
Jason Pyeron schrieb:
Stabbing in the dark here, but does:
mknod /dev/net/tun c 10 200
Or other partial steps you can think of cause the issue?
Not at all. The omcliproxy binary from OMSA starts to segfault once
there is any tun netdevice. If I destroy the tun devices, it works fine
On 08/17/2009 06:25 AM, John R Pierce wrote:
its possible you had both 32bit and 64bit versions installed, I dunno.
yum list installed firefox;
that will tell you.
--
Karanbir Singh : http://www.karan.org/ : 2522...@icq
___
CentOS mailing list
Lanny Marcus wrote:
On Sun, Aug 16, 2009 at 7:51 AM, Lee Perezleeca...@windstream.net wrote:
snip
There is nothing on this server that I can not replace. Did I just get
hacked? Should I wipe this thing and start over? Any and all advice is
greatly appreciated!!!
If you
-Original Message-
From: centos-boun...@centos.org
[mailto:centos-boun...@centos.org] On Behalf Of Andreas Rogge
Sent: Monday, August 17, 2009 5:51
To: CentOS mailing list
Subject: Re: [CentOS] How to create a tun-device with CentOS
packages only?
Jason Pyeron schrieb:
I didn't know that IPCOP could run on one that old. I have one like
that up in the attic, time to bring it back down. Before I upgraded to
5.3, I was running 4.7 with FireStarter and did not have any troubles.
As soon as I get some sleep I will be looking in to setting it up.
If it
I am trying to write a script that can pass cmd line args into an
executable it runs, I need at least 4 args, but I need to pass the rest
to it in the script if they exist.
$@ doesn't help because I use the 1st and 2nd etc, so how do I elegantly
handle passing args 4+ if they exist on the end of
Chuck wrote:
...
Just curious, why are the 2 identically named packages? Is this just an
oversight/bug on CentOS's part or does it serve some purpose?
As pointed out elsewhere, it is likely that you are on x86_64 and have
both i386 and x86_64 packages installed. This may be a misfeature
maybe you call shift (more than once) and then pass $...@?
Didn't know bash had a shift!
Thx!
jlc
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
Brian Mathis wrote:
Mailing list software (like majordomo) are a terrible way to handle
bulk mailing to people. They are not intended to be used for one-way
communication, and by default replies to them will get sent to
everyone else on the list. It is possible to disable this behavior,
but
I can't think of the exact syntax at the minute but something like;
if $# = 4 then
for i = 1 to ($# - 4)
echo arg number $i is $expr($i)
next
fi
$# is the number of args passed so just pass the total number of args
minus four ($~-4)
That syntax is all wrong, but somebody on
Is there an equivalent of a useradd for systems that are using LDAP user
management? I know I can build an LDIF file and import it, but it is a bit
of a pain to do it manually all the time.
Is there not an easier / faster way
Smbldap-tools
https://gna.org/projects/smbldap-tools/
Is there an equivalent of a useradd for systems that are using LDAP user
management? I know I can build an LDIF file and import it, but it is a bit
of a pain to do it manually all the time.
Is there not an easier / faster way
Smbldap-tools
https://gna.org/projects/smbldap-tools
I
On Mon, 2009-08-17 at 19:55 +0100, James Bensley wrote:
I can't think of the exact syntax at the minute but something like;
if $# = 4 then
for i = 1 to ($# - 4)
echo arg number $i is $expr($i)
next
fi
$ echo $*
1 2 3 4
$ \
while [ $1 != '' ] ; do
echo $1
shift
done
1
William L. Maltby wrote:
On Mon, 2009-08-17 at 19:55 +0100, James Bensley wrote:
I can't think of the exact syntax at the minute but something like;
if $# = 4 then
for i = 1 to ($# - 4)
echo arg number $i is $expr($i)
next
fi
$ echo $*
1 2 3 4
$ \
while [ $1 != '' ] ;
Isn't that only for samba-ldap? Can I still use them if I am not running
samba? I don't want to install and run Samba for no particular reason..
It can be used to create Posix accounts only.
The documentation resides here:
http://download.gna.org/smbldap-tools/docs/
You can try libuser, it's available in CentOS 5 (yum install
libuser) and apparently has support for LDAP.
libuser is an attempt to generalize the useradd/mod/del,
groupadd/mod/del commands to work with generic backends. The
implementation includes a module to work with an LDAP backend, I
Filipe Brandenburger
filbran...@gmail.com wrote in message
news:e814db780908171213h581bf267m10a95ab837be4...@mail.gmail.com...
Is there an equivalent of a useradd for systems that are using LDAP user
management? I know I can build an LDIF file and import it, but it is a
bit
of a
On Mon, 17 Aug 2009, Miguel Medalha wrote:
Isn't that only for samba-ldap? Can I still use them if I am not running
samba? I don't want to install and run Samba for no particular reason..
It can be used to create Posix accounts only.
The documentation resides here:
On Mon, 2009-08-17 at 15:00 -0400, Eric B. wrote:
Hi,
Is there an equivalent of a useradd for systems that are using LDAP user
management? I know I can build an LDIF file and import it, but it is a bit
of a pain to do it manually all the time.
Is there not an easier / faster way?
Am Montag, den 17.08.2009, 08:15 -0400 schrieb Jason Pyeron:
So to get a clarification, because I am dense. Do you need to have the drivers
insmoded or just have the /dev entries to make OMSA crash?
Neither, I can have the driver loaded and in /dev/net/tun. The problem
only arises once you
will C5.3 support a SmartArray 6i 'out of box', or does it need drivers
to boot from this? I am advising someone else remotely and don't have
the hardware handy to test.
___
CentOS mailing list
CentOS@centos.org
will C5.3 support a SmartArray 6i 'out of box', or does it need drivers
to boot from this?
Out of the box.
___
CentOS mailing list
CentOS@centos.org
http://lists.centos.org/mailman/listinfo/centos
On Aug 17, 2009, at 4:51 PM, Eric B. ebe...@hotmail.com wrote:
Any ideas where I might be able to find some
help for it? I enabled full logging on my OpenLDAP server, and I
see it
failing with TLS negotiaiton for some reason, even when I don't want
it to
use TLS.
'man libuser.conf'
Hello Everyone,
I've installed kvm from the lfarkas repo on CentOS 5.3, as per the
CentOS wiki page. I now want to install the virt-manager package, but
yum is giving me this error:
Error: Missing Dependency: python-virtinst = 0.400.3 is needed by
package virt-manager-0.7.0-5.el5.x86_64
On Mon, 2009-08-17 at 21:17 -0400, Kanwar Ranbir Sandhu wrote:
I can't find that package anywhere in that repo. So, where do I get it
from?
Forget I asked: I'll just grab it from the CentOS base repo.
Regards,
Ranbir
--
Kanwar Ranbir Sandhu
Linux 2.6.27.29-170.2.78.fc10.x86_64 x86_64
Hello,
I'm running httpd on a Centos 5.3 machine. I'm trying to use
.htaccess to disable direct linking to site images. I've got the following
rewrite rule, the domain is test.example.com which is at
/var/www/test.example.com under which is a directory called images.
RewriteEngine on
James Matthews wrote:
There is a very large issue with all people running VPS machines that
are waiting for upgrades.
Why is that, there is NO upgrade for this issue from upstream. We can
not possibly release something before it is released by Red Hat does.
snip
signature.asc
Dave wrote:
In my httpd virtual host directive i have:
alias /images /var/www/test.example.com/images
Directory /var/www/test.example.com/images
Options None
AllowOverride None
order allow,deny
Allow from all
/Directory
Comments appreciated.
Assume you mean that the rewrites are
61 matches
Mail list logo