On Fri, 2003-09-12 at 15:08, Byron Poland wrote:
Time is nearing for me to try out 9.2 RC** on my dell i8500. I have a
hacked dsdt for my bios/apci that I have been recompiling kernels with
the mydsdt=1 option. I've seen the changelogs about how this is taken
care of in initrd now, so
I have an Asus nforce2 board with the SII chipset. I actually just
swapped the drive out for a PATA drive. There are some mysterious
lockups happening with my system, And a look at the LKML shows that a
few SII owners are having the same issue. While my lock ups have been
reduced with the SII
On Mon, 2003-09-15 at 18:29, Robert Kulagowski wrote:
I just checked, and the same thing is happening with ftp.uninett.no and
rsync compared to fmirror and the mirror at purdue.edu
At least rsync doesn't re-download the file, but it's still wrong.
I use the cookersync.pl rsync script and it
Time is nearing for me to try out 9.2 RC** on my dell i8500. I have a
hacked dsdt for my bios/apci that I have been recompiling kernels with
the mydsdt=1 option. I've seen the changelogs about how this is taken
care of in initrd now, so
My question, is whats the procedure for including my
On Wed, 2003-09-10 at 12:14, Leif Sawyer wrote:
Byron Poland writes:
RC2 installed fine on my 120 gig Seagate SATA drive, on
an Silicon Image SATA controller, that is on my asus nforce2
mb
Byron,
Are you using SATA raid by any chance? I've got an Adaptec 1210SA
(using the SII
What is the current rev of the ieee1394 drivers in the cooker kernel and
the tmb kernel? ever since somewhere after kernel-2.4.21.0.18mdk my
firewire set up is really unstable, and I get tons of scsi abort
commands and messages during any disk access. ie:
Sep 3 23:29:08 piper kernel: EXT3 FS
Ignore the last e-mail... its a repeat, copied over my evolution folder,
to a fresh install and it sent it on first check.. oh well.
On Wed, 2003-09-10 at 16:34, Thomas Backlund wrote:
Byron Poland kirjoitti viestissään (lähetysaika Keskiviikko 10. Syyskuuta 2003
23:07):
Ignore the last e-mail... its a repeat, copied over my evolution folder,
to a fresh install and it sent it on first check.. oh well.
Would you mind
On Tue, 2003-09-09 at 21:25, Jeff Shultz wrote:
I wish I remembered how I managed to install 9.2RC1 to my 80gb Seagate
SATA drive - because on the install now it appears that it isn't going
to work. It fails when it comes to re-formatting or partitioning the
drive. On the first stage install,
On Tue, 2003-09-09 at 22:29, Jeff Shultz wrote:
On Tue, 2003-09-09 at 19:09, Byron Poland wrote:
RC2 installed fine on my 120 gig Seagate SATA drive, on an Silicon Image
SATA controller, that is on my asus nforce2 mb
from lspcidrake:
Silicon Image|Sil3112A Serial ATA [STORAGE_RAID
What is the current rev of the ieee1394 drivers in the cooker kernel and
the tmb kernel? ever since somewhere after kernel-2.4.21.0.18mdk my
firewire set up is really unstable, and I get tons of scsi abort
commands and messages during any disk access. ie:
Sep 3 23:29:08 piper kernel: EXT3 FS
On Thu, 2003-08-28 at 02:49, Leon Brooks wrote:
On Thu, 28 Aug 2003 12:28, Todd Lyons wrote:
I'd be curious to see what the traffic for those ports are on the
master server.
Even hits/day on the .torrent files would be informative.
Well with torrentsniff (availible in contribs) you can
Attached you will see some excerpts from my log file relating to issues
I'm having with all the recent kernels (on a machine updated to cooker
from beta 1). This log is from running the latest tmb kernel, however
the same messages appear in the latest cooker kernel and the multimedia
kernel. I
On Tue, 2003-08-19 at 10:01, Guillaume Cottenceau wrote:
Hi,
Could you please copy the model name line of the /proc/cpuinfo
of your laptop computer(s)?
Dell Inspiron 8500
model name : Mobile Intel(R) Pentium(R) 4 - M CPU 2.40GHz
So... Whats next...
I'm looking at :
working acpi for nForce (yeah... I'm dreamin' ... ;-) ...)
acl support for ReiserFS courtesy of SuSe...
working Via CLE and Savage dri/drm
VIA AGP 3.0 bugfixes...
more serial ata support
- SiS, ITC, Via, intel, Promise..
vloopback support
more drivers...
On Sat, 2003-08-16 at 23:07, Byron Poland wrote:
So... Whats next...
I'm looking at :
working acpi for nForce (yeah... I'm dreamin' ... ;-) ...)
acl support for ReiserFS courtesy of SuSe...
working Via CLE and Savage dri/drm
VIA AGP 3.0 bugfixes...
more serial ata support
- SiS, ITC
On Tue, 2002-09-10 at 19:40, faraj Meir wrote:
I want to save video from my cam and compress it to divx/xvid, canI do it ,
and if yes how?
Try kino from contrib, and then transcode available at plf.
On Mon, 2002-09-09 at 21:24, Vox wrote:
Luis M [EMAIL PROTECTED] writes:
you can always add the cooker's contrib/i586 RPM link from your
favorite FTP server :-)
Problem with that is that it doesn't have the hdlist anywhere in the
contrib tree, which means urpmi doesn't like it one
On Fri, 2002-09-06 at 11:19, Vox wrote:
Warly [EMAIL PROTECTED] writes:
Jason [EMAIL PROTECTED] writes:
I disagree, IMHO the download CD's should be as complete as
possible. For example, AFAIK the 3rd CD of the betas and RC1 has had
nearly 200MB of free space left on it while
On Tue, 2002-09-03 at 05:12, Danny Tholen wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
- -BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Tuesday 03 September 2002 01:35, Byron Poland wrote:
Notice the inclusion of the above snd-cmipci snd-pcm-oss alsa stuff
still. either way
I installed cooker (Aug 29) on a machine I threw together with some
spare parts hoping to make it into a test box.
It has an ATI All-in-wonder PRO agp card in it, driving a Samsung
SyncMaster 570 V Flat panel display. XFdrake is not able to come up
with a working config. I tried modifying the
-I sent this earlier today, but haven't seen it come through on the list
yet, I apologize if you get this twice.
uname -r
2.4.19-8mdk
I posted about this before and haven't gotten anywhere. C-Media
CMI8738-MX Chipset on a Soyo KT333/Ultra Dragon Main board.System locks
up hard about 15-30
with a recent cooker update I got a new version of lbreakout2.
(lbreakout2-2.3.2-1mdk)
It starts and runs fine until I loose a ball or pause the game at which
point it crashes. It looks like when there is a break from the normal
game play it crashes.
command line reads:
[byron@oak byron]$
On Fri, 2002-08-09 at 07:42, Alastair Scott wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thursday 08 Aug 2002 11:02 pm, Jeremy Salch wrote:
It crashes on run
Agreed after upgrading to gaim-0.59-5mdk; running as debug from the command
line (gaim -d) gives a
Removed
On Fri, 2002-03-29 at 05:49, Warly wrote:
Byron Poland [EMAIL PROTECTED] writes:
I did some fiddling after my post. to answer your question, no
rpmstrate on the dvd. However there was one in the
.../tmp/../Mandrake/base/ created/copied there during the mkcd process.
There was a bug
On Thu, 2002-03-28 at 04:27, Warly wrote:
Byron Poland [EMAIL PROTECTED] writes:
mkcd --discsize 468000 -a /cooker/
--
Warly
Okay, I've successfully built an iso and burned it to dvd-r, and it
boots and installs. Problem is package selection is gone. All
On Wed, 2002-03-27 at 08:05, Geoffrey Lee wrote:
--=-=-=
Name: gaim Relocations: (not relocateable)
Version : 0.54 Vendor: MandrakeSoft
Release : 3mdk Build Date: Wed Mar 27 13:39:51 2002
error in
On Tue, 2002-03-19 at 05:51, Warly wrote:
Byron Poland [EMAIL PROTECTED] writes:
Has anyone succesfully created a iso for a dvd using mkcd?
me :)
If so could you lend some pointers?
complex example in /misc/doc in the repository, where there is the
8.2 DVD defined, easier way
Has anyone succesfully created a iso for a dvd using mkcd? If so could
you lend some pointers?
I have access to a pioneer dvd-r in a firewire enclosure at work and
want to try and burn all of 8.2 + contribs and some custom stuff to a
dvd-r so I can just do an install, and not have to switch
I'm not sure if this is the best place to post this but, I think it is a
usability issue.
I now have 3 external removable storage devices, 1 acomdata 80 gig
firewire drive (dev1), 1 firewire enclosure with a 30gig drive in it
(dev2), and 1 usb smartmedia card reader (dev3). I have all 3 working
On Sat, 2002-03-16 at 18:25, Dave Seff wrote:
I installed kino and all of its deps. from cooker. When I run kino it
immediately segfaults. I did some poking around and found it craps out in
libdv, particularly dv.c at line 136.
#if ARCH_X86
dv_use_mmx = mmx_ok();
#endif
I have an
On Wed, 2002-03-13 at 18:07, Guillaume Cottenceau wrote:
Byron Poland [EMAIL PROTECTED] writes:
--fixed-- unlike my other box, I had to modprobe sd_mod. not sure why I
have to do it here and not on the other box.. could it be it already as
a scsi disk (a scsi zip100)?
What needs
I'm running an up-to date cooker, and am trying to get my ACOM Data
firewire drive up and running, it requires the latest ieee1394 cvs
drivers, so I got them and compiled them and when I modprobe ohci1394 no
device is created in /dev. the output from /var/messages is below.
I've been able to
?
this is what happens with the box where it works:
Mar 11 22:15:58 icculus kernel: devfs_mk_dir(host1/bus0/target0/lun0):
using old entry in dir: d7432240 target0
Mar 11 22:15:58 icculus kernel: Attached scsi disk sdb at scsi1, channel
0, id 0, lun 0
On Tue, 2002-03-12 at 18:18, Byron Poland wrote
fixes
SEVERAL bugs. The most important to any user:
Linux: Flash may crash with exported X display. (Bug 58937)
Linux: On Linux, there may be problems with ESD Audio and Flash. (Bugs
85772)
I think you mis-read the rel-notes, those are known issues, that are
unresolved.. I check on Bug
works fine with me (cooker install about 2 days before beta4 + all the
latest cooker updates) Reran the vmware-config script today to change
some networking stuff.. ran with out a hitch.
On Wed, 2002-03-06 at 16:08, Ray Carlino wrote:
I can't compile vmware using beta 4..
header version and
is on the cd...
I will try again
On Wed, 2002-03-06 at 14:26, Byron Poland wrote:
works fine with me (cooker install about 2 days before beta4 + all the
latest cooker updates) Reran the vmware-config script today to change
some networking stuff.. ran with out a hitch.
On Wed, 2002-03
On Wed, 2002-03-06 at 16:17, Byron Poland wrote:
I've been updating my laptop with the latest cooker packages as they
come out. Everything is getting better and better. This afternoon I
updated to the devfsd packages (I'm updated to: devfsd-1.3.24-13mdk)
And now my link from /dev/cdrom
installed openofficeorg the other day, I'm rather impressed anyway
in nautilus (not sure about kde) the mime type for the created documents
(sxw) comes up as application/zip, and has a package type icon can
this be changed, and set up as default?
Looks like a new gaim release is out -053
my main question is: ithere support in mandrake for the gaim-applet fr
the gnome panel?
:
Byron Poland [EMAIL PROTECTED] writes:
Okay, I installed beta3 on my new inspiron 8100 yesterday, it was not
with out problems. here are the issues I had with the install and
afterwards.
[...]
unknown : Texas Instruments|PCI4451 PC card Cardbus Controller
unknown
file attached.
I'm accessing the net via my wireless card, so the card-bus is
working
On Wed, 2002-02-27 at 13:37, Guillaume Cottenceau wrote:
Byron Poland [EMAIL PROTECTED] writes:
It is a Dell Laptop. The install saw my PCMCIA wireless card (didn't
set it up right) and carbus
On Wed, 2002-02-27 at 14:14, Guillaume Cottenceau wrote:
could you
1. boot with pcmcia.img and just wait for dialog to appear,
switch to console #2 and verify it also starts OK your pcmcia
Messages: (had transfered)
loading module dependencies
PCMCIA: probing PCI bus
TI 4451
Hi,
I'm trying to compile nautilus1.0.6-1 src.rpm. I've gotten all the
dependencies built except one:
# rpm --rebuild nautilus-1.0.6-1mdk.src.rpm
Installing nautilus-1.0.6-1mdk.src.rpm
error: failed build dependencies:
bzip2-devel is needed by nautilus-1.0.6-1mdk
yet there seems to
don't know if this is related, but with the latest nautilus build
(nautilus-1.0.4-1mdk) when I log into my gnome desktop (drawn by
nautilus) fam shots my cpu usage to almost 100% and nautilus won't start
until I kill the fam process.
On 09 Jul 2001 23:54:27 -0500, Steve Fox wrote:
Does anyone
nautilus processes. I still got not help :-)
I really know way too little about nautilus, but ready to assisit if some
knowledgeable person suggests how to debug it.
-andrej
On 10 Jul 2001, Byron Poland wrote:
don't know if this is related, but with the latest nautilus build
(nautilus
Has anyone who uses evolution (0.10) and upgraded gnucash + dependencies
to 1.6 experienced evolution not deleting the mail from pop3 servers
anymore?
I upgraded to gnucash 1.6 the other day. and since then (like I said)
evolution has ceased deleting my retrieved messages, whats worse is that
overlooked the subject before in haste, apologize for any inconvienences
caused
On 22 Jun 2001 19:16:13 -0400, Byron Poland wrote:
Has anyone who uses evolution (0.10) and upgraded gnucash + dependencies
to 1.6 experienced evolution not deleting the mail from pop3 servers
anymore?
I
I've been trying to get gtktalog to create a report based on some older
files I have and going back to some 8.0 beta builds it would segfault
when I had my file open and asked it to generate a report. I always
figured a new build would fix it, but after grabing the latest from
cooker, it still
Has anyone noticed that if you have the flash plugin set up with
mozilla/galeon (not sure about netscape 4.7x) and you have another audio
source playing (ie xmms) mozilla/galeon won't load until you stop the
other source playing. It also seems to sorta lock up the browser when
loading some pages
I compiled the source rpms last night and they are working fine so far.
New is a Nvidia splash screen as X starts. Also now my second monitor
in twinview blanks out instead of stayign on when DPMS starts
I can upload my rpms to some place if someone points me to a suitable
place.
On 18
I just downloaded a new mozilla nightly build (5-8), (both the sea and
the full tar.gz) and when I run the installer or mozilla I get an error:
/usr/local/mozilla/mozilla-bin: error while loading shared libraries:
libstdc++-libc6.1-2.so.3: cannot load shared object file: No such file
or
On 04 May 2001 01:46:39 +0200, Andreas Simon wrote:
On Friday 04 May 2001 00:57, Byron Poland wrote:
I was wondering if there was an easy way to switch my LM 8.0 to use gdm
instead of kdm.
Change in /etc/sysconfig/desktop
DESKTOP=KDE
to
DESKTOP=GNOME
and next time you get gdm instead
I was wondering if there was an easy way to switch my LM 8.0 to use gdm instead of kdm.
I just set up dual monitors using nvidia's twinview feature, and when X
starts via kdm when I move my mouse or hit a key, kdm craps out. If I
can manage to kill kdm, and get gdm running all is fine.
thanks
Hi... I installed the realplayer rpm available from real.com
(rp8.linux20.libc6.i386.cs1.rpm)
and am having an odd problem with it under 8.0, when playing a
file/stream with it all you get is pretty much static. I played around
with all the options realplayer has but no difference.
Like I
just installed 8.0.
The only problem (really annoying to me) is that my fonts are all
screwed up in the browsers. after the install, just running mozilla or
netscape, or even Konqueror my fonts look as shown in these 2 pictures:
http://icculus.tube013.org/ugly-moz.jpg and
On 20 Apr 2001 01:58:21 +0200, Guillaume Cottenceau wrote:
Byron Poland [EMAIL PROTECTED] writes:
just installed 8.0.
The only problem (really annoying to me) is that my fonts are all
screwed up in the browsers. after the install, just running mozilla or
netscape, or even Konqueror
On 19 Apr 2001 21:21:33 -0400, Byron Poland wrote:
On 20 Apr 2001 01:58:21 +0200, Guillaume Cottenceau wrote:
Byron Poland [EMAIL PROTECTED] writes:
just installed 8.0.
The only problem (really annoying to me) is that my fonts are all
screwed up in the browsers. after
I'm trying to get the hardware monitoring working.
I have an epox 8KTA+ board which has the VIA VT82C686A chipset for
monitoring.
And have the latest cooker installed (4/17/00 + updates through today)
I installed the lm_utils rpm, and ran sensors-detect. after
sensors-detect lsmod showed:
On 11 Apr 2001 20:06:39 -0400, Greg Sarsons wrote:
I really like the Welcome screen but I have one question. On the screen
most of the salutations seem to start with a captial. Why does the
english salutaion 'welcome' start then with a lowercase 'w'.
Other than that the expert install I
A few comments on RC1 of 8.0
First off in the slides that run during the package installation, The
wording needs to change.
"Thanks to have chosen Linux-Mandrake" Just doen't sound right. how
about "Thank you for chosing Linux-Mandrake" or something along those
lines.
Second, On my system
Hi,
I recently installed beta 3, and when I went to run rpmdrake, when ever
it would "Analyze sources" it would seg fault after the install cd's
were "analyzed".
I then upgraded urpmi and rpmdrake to the versions on cooker
(rpmdrake-1.3-41mdk, urpmi-1.5-28mdk) now rpmdrake runs normally, and
62 matches
Mail list logo
