running 2.6.19-rc3-omap1 Kernel on TI DVEVM
Peter Wippich wrote:
Hi Alex,
When I try to load that image using TFTP, it loads fine,
Being uncompressed fine. But it gets stuck immediately
after
Printing booting. u-Boot
-rc3-omap1 Kernel on TI DVEVM
Peter Wippich wrote:
Hi Alex,
When I try to load that image using TFTP, it loads fine,
Being uncompressed fine. But it gets stuck immediately
after
Printing booting. u-Boot message
-source@linux.davincidsp.com
Subject: RE: Problem running 2.6.19-rc3-omap1 Kernel on TI DVEVM
Hi Alex,
On Sun, 19 Nov 2006, Alex Rier wrote:
Hi,
I've applied the patch found at :
http:/linux.omap.com/pipermail/davinci-linux-open-source/attac
hments/200
60626/08870398/machine
Hello,
arch/arm/config/davinci_evm_dm644x_defconfig allowed me to load and
start the kernel.
It is because the USB driver disabled in this config. 2.6.19-rc3-omap1
not running with enabled USB.
--
Regards,
DDV mailto:[EMAIL PROTECTED]
Hi,
I've done:
cg-clone git://source.mvista.com/git/linux-davinci-2.6.git
cd linux-davinci-2.6
# Use .config from the DVEVM running Montavista Kernel
Linux_2.6.10_mvl401
# zcat /proc/config.gz .config
# Change in arch/arm/Makefile CFLAGS_ABI to be:
# CFLAGS_ABI :=-mabi=aapcs
Hi Alex,
When I try to load that image using TFTP, it loads fine,
Being uncompressed fine. But it gets stuck immediately after
Printing booting. u-Boot message.
I had the same problem first. There are to solutions:
a) update your bootloader to 1.1.3_0.5,4
b) apply a patch to your kernel
Peter Wippich wrote:
Hi Alex,
When I try to load that image using TFTP, it loads fine,
Being uncompressed fine. But it gets stuck immediately after
Printing booting. u-Boot message.
I had the same problem first. There are to solutions:
a) update your bootloader to 1.1.3_0.5,4
b)