RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808
I encountered a very similar problem to this on a Windows XP machine. I had ActiveState perl 5.6 installed. I upgraded to 5.8.2 and installed DBI from the standard repository and the 5.8.2 DBD-Oracle from ftp.esoftmatic.com/outgoing/DBI/5.8.2. I got the same error described by the original poster. I found that the solution that worked for me was to uninstall perl and completely erase the perl directory. I reinstalled perl, DBI, and DBD-Oracle and everything works just fine now. Mark -Original Message- From: Jeff Urlwin [mailto:[EMAIL PROTECTED] Sent: Friday, January 16, 2004 10:37 AM To: 'Paul Clements'; [EMAIL PROTECTED] Subject: RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808 It sounds like you were running the older .dll from the newer perl. Are you sure you: a) Didn't have the Oracle.dll loaded so that ppm failed to overwrite it? (reboot and re-run ppm should fix it, I would think) b) On one machine, when I overwrote 5.6.1 (build 63x) with 5.8.2 (808), it asked me to reboot, did you? I *just* installed a fresh 808 on a machine, did the ppm and ran a test script that did a select * from tab. It worked. Jeff -Original Message- From: Paul Clements [mailto:[EMAIL PROTECTED] Sent: Friday, January 16, 2004 7:57 AM To: Jeff Urlwin; [EMAIL PROTECTED] Subject: RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808 Jeff, Thanks for getting back to me as requested I have appended the results of perl -v are This is perl, v5.8.2 built for MSWin32-x86-multi-thread (with 25 registered patches, see perl -V for more detail) Copyright 1987-2003, Larry Wall Binary build 808 provided by ActiveState Corp. http://www.ActiveState.com ActiveState is a division of Sophos. Built Dec 9 2003 10:19:40 Regards Paul Clements -Original Message- From: Jeff Urlwin [mailto:[EMAIL PROTECTED] Sent: Fri 16/01/2004 12:22 To: Paul Clements; [EMAIL PROTECTED] Cc: Subject: RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808 Hi, I have just downloaded 5.8.2 Build 808 from ActiveState and the 5.8.2 branch of DBI and DBD:Oracle from ftp.esoftmatic.com/outgoing/DBI/5.8.2 Unfortunately I get the error The procedure entry point Perl_Glockhook_ptr could not be located in the dynamic link library perl58.dll From browsing the web it looks like this is only built for Build 807, hence does anyone know where I can get a binary build for 808. Please do a perl -v on your perl version. I think you are getting the wrong version. Jeff __ __ NOTICE: The information contained in this e-mail is confidential. If you have received this by mistake you should not disclose, copy, circulate or in any other way use the information contained herein. This e-mail may be legally privileged and unauthorised use may be unlawful. If you have received this e-mail in error, please telephone us on 01709 300 900 immediately so we can arrange for its return. Please then delete your copy. This email has been scanned for all viruses by the MessageLabs Email Security System. __ __
RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808
FYI, You should *always* try to get DBI and DBD::xxx from my site if you are going to get it at all. Reason: the DBI has some internal versioning issues upon which DBDs are dependant. Getting DBI Version X from one place and DBD::Y which was not built with DBI version X, can cause issues... Regards, Jeff -Original Message- From: Andrews, Mark [mailto:[EMAIL PROTECTED] Sent: Tuesday, January 20, 2004 8:45 AM To: [EMAIL PROTECTED] Subject: RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808 I encountered a very similar problem to this on a Windows XP machine. I had ActiveState perl 5.6 installed. I upgraded to 5.8.2 and installed DBI from the standard repository and the 5.8.2 DBD-Oracle from ftp.esoftmatic.com/outgoing/DBI/5.8.2. I got the same error described by the original poster. I found that the solution that worked for me was to uninstall perl and completely erase the perl directory. I reinstalled perl, DBI, and DBD-Oracle and everything works just fine now. Mark -Original Message- From: Jeff Urlwin [mailto:[EMAIL PROTECTED] Sent: Friday, January 16, 2004 10:37 AM To: 'Paul Clements'; [EMAIL PROTECTED] Subject: RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808 It sounds like you were running the older .dll from the newer perl. Are you sure you: a) Didn't have the Oracle.dll loaded so that ppm failed to overwrite it? (reboot and re-run ppm should fix it, I would think) b) On one machine, when I overwrote 5.6.1 (build 63x) with 5.8.2 (808), it asked me to reboot, did you? I *just* installed a fresh 808 on a machine, did the ppm and ran a test script that did a select * from tab. It worked. Jeff -Original Message- From: Paul Clements [mailto:[EMAIL PROTECTED] Sent: Friday, January 16, 2004 7:57 AM To: Jeff Urlwin; [EMAIL PROTECTED] Subject: RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808 Jeff, Thanks for getting back to me as requested I have appended the results of perl -v are This is perl, v5.8.2 built for MSWin32-x86-multi-thread (with 25 registered patches, see perl -V for more detail) Copyright 1987-2003, Larry Wall Binary build 808 provided by ActiveState Corp. http://www.ActiveState.com ActiveState is a division of Sophos. Built Dec 9 2003 10:19:40 Regards Paul Clements -Original Message- From: Jeff Urlwin [mailto:[EMAIL PROTECTED] Sent: Fri 16/01/2004 12:22 To: Paul Clements; [EMAIL PROTECTED] Cc: Subject: RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808 Hi, I have just downloaded 5.8.2 Build 808 from ActiveState and the 5.8.2 branch of DBI and DBD:Oracle from ftp.esoftmatic.com/outgoing/DBI/5.8.2 Unfortunately I get the error The procedure entry point Perl_Glockhook_ptr could not be located in the dynamic link library perl58.dll From browsing the web it looks like this is only built for Build 807, hence does anyone know where I can get a binary build for 808. Please do a perl -v on your perl version. I think you are getting the wrong version. Jeff __ __ NOTICE: The information contained in this e-mail is confidential. If you have received this by mistake you should not disclose, copy, circulate or in any other way use the information contained herein. This e-mail may be legally privileged and unauthorised use may be unlawful. If you have received this e-mail in error, please telephone us on 01709 300 900 immediately so we can arrange for its return. Please then delete your copy. This email has been scanned for all viruses by the MessageLabs Email Security System. __ __
RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808
Hi, I have just downloaded 5.8.2 Build 808 from ActiveState and the 5.8.2 branch of DBI and DBD:Oracle from ftp.esoftmatic.com/outgoing/DBI/5.8.2 Unfortunately I get the error The procedure entry point Perl_Glockhook_ptr could not be located in the dynamic link library perl58.dll From browsing the web it looks like this is only built for Build 807, hence does anyone know where I can get a binary build for 808. Please do a perl -v on your perl version. I think you are getting the wrong version. Jeff
RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808
Jeff, Thanks for getting back to me as requested I have appended the results of perl -v are This is perl, v5.8.2 built for MSWin32-x86-multi-thread (with 25 registered patches, see perl -V for more detail) Copyright 1987-2003, Larry Wall Binary build 808 provided by ActiveState Corp. http://www.ActiveState.com ActiveState is a division of Sophos. Built Dec 9 2003 10:19:40 Regards Paul Clements -Original Message- From: Jeff Urlwin [mailto:[EMAIL PROTECTED] Sent: Fri 16/01/2004 12:22 To: Paul Clements; [EMAIL PROTECTED] Cc: Subject: RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808 Hi, I have just downloaded 5.8.2 Build 808 from ActiveState and the 5.8.2 branch of DBI and DBD:Oracle from ftp.esoftmatic.com/outgoing/DBI/5.8.2 Unfortunately I get the error The procedure entry point Perl_Glockhook_ptr could not be located in the dynamic link library perl58.dll From browsing the web it looks like this is only built for Build 807, hence does anyone know where I can get a binary build for 808. Please do a perl -v on your perl version. I think you are getting the wrong version. Jeff NOTICE: The information contained in this e-mail is confidential. If you have received this by mistake you should not disclose, copy, circulate or in any other way use the information contained herein. This e-mail may be legally privileged and unauthorised use may be unlawful. If you have received this e-mail in error, please telephone us on 01709 300 900 immediately so we can arrange for its return. Please then delete your copy. This email has been scanned for all viruses by the MessageLabs Email Security System.
RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808
It sounds like you were running the older .dll from the newer perl. Are you sure you: a) Didn't have the Oracle.dll loaded so that ppm failed to overwrite it? (reboot and re-run ppm should fix it, I would think) b) On one machine, when I overwrote 5.6.1 (build 63x) with 5.8.2 (808), it asked me to reboot, did you? I *just* installed a fresh 808 on a machine, did the ppm and ran a test script that did a select * from tab. It worked. Jeff -Original Message- From: Paul Clements [mailto:[EMAIL PROTECTED] Sent: Friday, January 16, 2004 7:57 AM To: Jeff Urlwin; [EMAIL PROTECTED] Subject: RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808 Jeff, Thanks for getting back to me as requested I have appended the results of perl -v are This is perl, v5.8.2 built for MSWin32-x86-multi-thread (with 25 registered patches, see perl -V for more detail) Copyright 1987-2003, Larry Wall Binary build 808 provided by ActiveState Corp. http://www.ActiveState.com ActiveState is a division of Sophos. Built Dec 9 2003 10:19:40 Regards Paul Clements -Original Message- From: Jeff Urlwin [mailto:[EMAIL PROTECTED] Sent: Fri 16/01/2004 12:22 To: Paul Clements; [EMAIL PROTECTED] Cc: Subject: RE: Binary releases for DBI and DBD:Oracle for ActivePerl Build 808 Hi, I have just downloaded 5.8.2 Build 808 from ActiveState and the 5.8.2 branch of DBI and DBD:Oracle from ftp.esoftmatic.com/outgoing/DBI/5.8.2 Unfortunately I get the error The procedure entry point Perl_Glockhook_ptr could not be located in the dynamic link library perl58.dll From browsing the web it looks like this is only built for Build 807, hence does anyone know where I can get a binary build for 808. Please do a perl -v on your perl version. I think you are getting the wrong version. Jeff __ __ NOTICE: The information contained in this e-mail is confidential. If you have received this by mistake you should not disclose, copy, circulate or in any other way use the information contained herein. This e-mail may be legally privileged and unauthorised use may be unlawful. If you have received this e-mail in error, please telephone us on 01709 300 900 immediately so we can arrange for its return. Please then delete your copy. This email has been scanned for all viruses by the MessageLabs Email Security System. __ __
