This bug report is incorrect.
Every separate use of --disable-epsv toggles the use of EPSV, and those
occurances used in the config file are no different than others. So, once in
the config file and once on the command line puts the state back to where it
started.
You may of course consider
Laurent Bonnaud wrote:
goobox is one of the last few packages that still depend on the old
gstreamer 0.8 library. So could you please update it to depend on
gstreamer 0.10 ?
This was already discussed and will be most likely not considered:
Package: gaim
Version: 1:2.0.0+beta5-9
Followup-For: Bug #403343
Starting up an irc session with irc.fdfnet.net:
(gdb) run
Starting program: /usr/bin/gaim
Failed to read a valid object file image from memory.
[Thread debugging using libthread_db enabled]
[New Thread -1208883520 (LWP 17022)]
Compiled and booted!! I apparently will work with voluntary preemption as
well as no premption. No oopses, flags. Next week I will start to play with
it!
Caveat:
Unionfs will not compile against the patched sources (not using it yet so it
can wait).
--
To UNSUBSCRIBE, email to [EMAIL
Package: sympa
Version: 5.2.3-0.7
Severity: important
Tags: patch
Reloading system log daemon: syslogd.
+ rm -f /etc/sympa/facility
+ '[' true = true -o true = true ']'
+ db_get wwsympa/webserver_type
+ _db_cmd 'GET wwsympa/webserver_type'
+ IFS=' '
+ printf '%s\n' 'GET wwsympa/webserver_type'
+
Hi
On Fri, Dec 22, 2006 at 12:17:52AM +0100, Daniel Hokka Zakrisson wrote:
Ola Lundqvist wrote:
Hi again
Now I know that gcc 4.2 is not generally available unfortunatly
so that is not an option...
I wonder which alternative that is best. To disable optimisation or
remove
Package: gaim
Version: 1:2.0.0+beta5-9
Followup-For: Bug #403343
On my second attempt to run gaim under gdb, I obtained the following
backtrace, on the third attempt I had no segfault and established an IRC
session alright.
(gdb) run
The program being debugged has been started already.
Start
On Fri, 2006-12-22 at 08:41 +0100, Patrick Matthäi wrote:
It still exists in Debian Sid with 1.3.9-2.
Entpacke Ersatz für gzip ...
Richte gzip ein (1.3.9-2) ...
install-info(/usr/share/info/gzip.info): Warnung, ignoriere verwirrenden
Eintrag INFO-DIR-ENTRY in Datei.
Check to see if you
On Fri, Dec 22, 2006 at 12:48:20AM +0100, Frans Pop wrote:
That this is now documented in lilo does not mean it should not be
documented in the RN too.
Indeed. I also noticed that during a regular kernel update lilo is not
always called. That's probably a bug in kernel-package even if it is
[EMAIL PROTECTED] (Debian Bug Tracking System) wrote:
Hi,
This is an automatic notification regarding your Bug report
#404039: i810switch: please build for amd64,
which was filed against the i810switch package.
It has been closed by James Bromberger [EMAIL PROTECTED].
Thanks James !
JB.
tags 404166 pending
thanks
On Fri, Dec 22, 2006 at 07:45:02AM +0100, Christian Perrier wrote:
The debian/po/es.po file for portmap uses inconsistent encoding.
Oops. I mixed my standard template. Thanks for spotting this. I have fixed it
locally, before I make an upload I will ask for
Package: ekiga
Version: 2.0.3-2
Severity: wishlist
It would be convenient if Ekiga provided a way to trigger external
commands on certain events. The use-case I'd most probably take
advantage of would involve xmms2 stop when I accept an incoming call
(or make an outgoing one), and xmms2 play
El Jueves, 21 de Diciembre de 2006 11:07, Martin-Éric Racine escribió:
...patching file rc.sysv-rc...
Patching file rc.sys-rc? Take care, the patchfile doesn't contain the exact
filename to patch. Try with:
patch /etc/init.d/rc --dry-run rc-bootsplash.patch
or copy the patchfile to
On Friday 22 December 2006 05:07, Adam Porter wrote:
Package: kdepim
Version: 4:3.5.5.dfsg.1-4
Severity: serious
Justification: no longer builds from source
I can't reproduce it - and none of the autobuilders have been able to
reproduce it.
~/Temp/src/temp/kdepim-3.5.5.dfsg.1/admin$ perl
tags 403826 pending
thanks
I've added this translation to the new upload I'm preparing to Portmap,
should be uploaded in a week or so.
Javier
signature.asc
Description: Digital signature
On Friday 22 December 2006 09:50, Adam Porter wrote:
On Friday 22 December 2006 02:33, Sune Vuorela wrote:
How is your perl?
Do you have autoconf2.13 installed?
$ acp autoconf2.13
autoconf2.13:
Installed: 2.13-58
Candidate: 2.13-58
Version table:
*** 2.13-58 0
900
Package: sympa
Version: 5.2.3-0.7
Severity: important
Setting up sympa (5.2.3-0.7) ...
/etc/sympa/sympa.conf file has been created
/etc/sympa/wwsympa.conf file has been created
Starting mailing list manager: sympaDBI
connect('dbname=mysql;host=localhost','root',...) failed: Access denied
for user
On Friday 22 December 2006 02:33, Sune Vuorela wrote:
How is your perl?
Do you have autoconf2.13 installed?
$ acp autoconf
autoconf:
Installed: 2.61-3
Candidate: 2.61-3
Version table:
*** 2.61-3 0
800 http://ftp.us.debian.org unstable/main Packages
100
severity 404143 important
tags 404143 upstream
stop
On Fri, Dec 22, 2006 at 01:51:36AM +0100, [EMAIL PROTECTED] wrote:
Package: linux-image-2.6.18-3-amd64
Version: 2.6.18-7
Severity: grave
Justification: hardware overheating hazard; requires periodic reboots
(This is not the same bug as
Package: iceweasel
Version: 2.0+dfsg-1
hangs when you go to this URL when javascript is on:
https://tritonlink.ucsd.edu/link/ewad-https-webapps/cgi-bin/tritonlink.pl/2/students/academic/classes/acd/webreg.pl
_
Your Hotmail address
On Mit, 20 Dez 2006, Florian Weimer wrote:
* URL : http://www.pragme-ade.com
It's .nl.
Also, but in both (the .nl and .com) cases, it is
PRAGMA
not
PRAGME
but nobody spotted this but me ;-)
* License : GPLv2
Does your package include documentation?
2006/12/21, Sergio Gelato [EMAIL PROTECTED]:
3) Once the above is taken care of, I find that
/lib/nut/bcmxcp_usb -DD -u root
gives me the following error:
Communications with UPS lost: Receive error (Request command): COMMAND: 31
RECONNECT USB DEVICE
Poking around with strace, it
severity 404164 minor
thanks
In practice these strings have a vanishing probability of even being
seen by anyone any more.
Dominic.
--
Dominic Hargreaves | http://www.larted.org.uk/~dom/
PGP key 5178E2A5 from the.earth.li (keyserver,web,email)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
Hello,
Regarding conflicts like that between slang-slirp and slirp.
(see recent bugs filed by Michael Ablassmeier [EMAIL PROTECTED]
http://bugs.debian.org/cgi-bin/[EMAIL PROTECTED]
).
I feel that this a currently an area not addressed by policy
sufficiently well.
Assume that:
1. There are
Package: mozilla-firefox
Version: 1.0.4-2sarge13
Severity: normal
*** Please type your report below this line ***
Firefox in sarge crashes when opening
http://www.sonyericsson.com/spg.jsp?cc=filc=fiver=4000template=pp1zone=pplm=pp
without flash and clicking cancel a few times on the 'flash
Package: setserial
Version: 2.17-43
Severity: normal
Tags: l10n
Two files in your debian/po directory have incorrect names:
setserial.ja.po is identical to ja.po and should therefore be removed
seterial.pl.po should be renaed to pl.po
-- System Information:
Debian Release: 4.0
APT prefers
Hello Alexander.
Alexander Sack - Debian Bugmail, 22.12.2006 01:59:
On Fri, Dec 22, 2006 at 12:55:48AM +0100, Mathias Brodala wrote:
Due to the movements of the icons in the latest release, the mozTrayBiff
extension is no longer able to find Icedove’s application icon. Because of
that, no
Kapil Hari Paranjape wrote:
Hello,
Regarding conflicts like that between slang-slirp and slirp.
(see recent bugs filed by Michael Ablassmeier [EMAIL PROTECTED]
http://bugs.debian.org/cgi-bin/[EMAIL PROTECTED]
).
I feel that this a currently an area not addressed by policy
sufficiently well.
Hi all!
On Mit, 20 Dez 2006, Anthony DeRobertis wrote:
Package: lmodern
Version: 1.00-3
Severity: important
[The BTS seems to have ignored my last submission of this. No idea why.
Re-sending with some additional info.]
When I select LMRoman10 in LyX, I get treated to the entire document
package: linux-image-2.6.18-3-686
version:2.6.18-7
severity:minor
When upgrading linux-image to the latest version, I got this :
Paramétrage de linux-image-2.6.18-3-686 (2.6.18-7) ...
Hmm. The package shipped with a symbolic
link /lib/modules/2.6.18-3-686/source
However, I can not read the
Quoting Javier Fernández-Sanguino Peña ([EMAIL PROTECTED]):
Package: euro-support
Version: 0.37
Severity: grave
I've missed to adapt this package to the latest glibc's changes (which
introduced /etc/default/locale) and most of its work is already done by
localization-config.
Package: portmap
Version: 5-24
Severity: wishlist
Tags: patch l10n
Hello:
Atached portmap debconf template basque translation, please add it.
Thanks
-- System Information:
Debian Release: 4.0
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing'), (500, 'stable')
I have purged the gzip package before.
__
Ein Herz für Kinder - Ihre Spende hilft! Aktion: www.deutschlandsegelt.de
Unser Dankeschön: Ihr Name auf dem Segel der 1. deutschen America's Cup-Yacht!
Package: sitebar
Version: N/A
Severity: wishlist
Tags: patch l10n
Please find attached the french debconf templates update, proofread by the
debian-l10n-french mailing list contributors.
If you do not already use it, please remember about the
podebconf-report-po utility, which helps warning
Package: steam
Severity: minor
Tags: patch l10n
The debian/po/de.po file is UTF-8 encoded, however, comments in the file
header still use one ISO-8859-1 character for the translator's name.
Please us the attached file instead.
-- System Information:
Debian Release: 4.0
APT prefers unstable
Hello,
On Fri, 22 Dec 2006, Luk Claes wrote:
Kapil Hari Paranjape wrote:
In such a situation it would be incorrect to insist that one of the
packages use a binary with a different name---because of (1).
So what's wrong with insisting both of them changing the name?
That we would have two
Michelle Konzack wrote:
Hello Lior,
Am 2006-12-20 20:08:13, schrieb Lior Kaplan:
Hi,
I'm sorry, but I didn't find the link you mentioned. Could you be more
specific ?
Sorry, my fault.
The Symlink:
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType/tehreer.ttf
is pointing to
severity 404143 serious
thanks
maximilian attems [EMAIL PROTECTED] writes:
severity 404143 important
tags 404143 upstream
stop
[...]
big nack,
acpi has a huge potential destabilisation.
at this time of the game adding acpi patches is pron to regression
at unexpected corners.
etch will
severity 404143 critical
thanks
* Bastian Blank ([EMAIL PROTECTED]) [061222 01:27]:
On Fri, Dec 22, 2006 at 01:51:36AM +0100, [EMAIL PROTECTED] wrote:
Consequence: linux-image-2.6.18-3-amd63 (=2.6.18-7) is unsuitable for
release.
Failing for you don't makes it unsuitable.
That is a true
forcemerge 366808 394878 404153
tag 366808 pending
thanks
This is the third identical bug report. Please read the list of open bugs
before submitting.
I'm working on it.
Marcus
pgp5ntvktsVMm.pgp
Description: PGP signature
Package: webalizer
Severity: minor
Tags: patch l10n
The Finnish translation for debconf messages is UTF-8 encoded, however
top comments still use ISO-8859-1 characters for the translator's name.
Please use the attached file instead, as debian/po/fi.po
-- System Information:
Debian Release: 4.0
[EMAIL PROTECTED] writes:
I'm more than willing to help test a kernel package, but I'll be on
[VAC] from 2006-12-23 to 2007-01-03 inclusive. So, please do not
release Etch just now :)
I have ordered an nx6325, which should arrive directly after
Christmas. I would also be happy to test a fixed
On Thu, Dec 21, 2006 at 11:35:53PM -0200, Nelson A. de Oliveira wrote:
5103: NetworkManager is running.
5103: Are offline
5103: interface: org.freedesktop.DBus, object path:
/org/freedesktop/DBus, method: NameAcquired
This is the problem. Newer versions of ypbind introduce support for
On Fri, Dec 22, 2006 at 10:30:57AM +0100, Marc 'HE' Brockschmidt wrote:
Sorry, I don't accept this. We are talking about an *overheating*
problem, which means *broken* hardware. There needs to be at least a fix
documented in the release-notes.
Garbage-in, garbage-out. The BIOS of that machines
Package: exim4-base
Version: 4.64-1
Severity: normal
$ sudo /etc/init.d/exim4 start
Starting MTA:/usr/sbin/exim4 already running.
$ echo $?
1
In my reading, this is a violation of LSB
http://refspecs.freestandards.org/LSB_3.1.0/LSB-Core-generic/LSB-Core-generic/iniscrptact.html
where exit code
tags 404057 + patch
thanks
function find_location_of in install/axyl-common-funcs.sh needs to skip
non-existant directories passed as arguments as where to look.
Additionally true needs to be run last, since (ba)sh exists with the
last run programs exitcode as it's own exit code, and I beleive
Hi,
I did some work on fakeroot support for *at() some time a go. Patch
against 1.5.10 is attached, if you have any use for it. It appears to
work fine with glibc 2.4 and coreutils 6.4 on the gentoo system I run.
Best regards,
/henrik
froot_1_5_10-atfuncs.patch
Description:
Package: mail-notification
Version: 4.0~rc2.dfsg.1-4
Severity: normal
When pop-up messages are enabled:
if I want to open tray-area menu (ie modify properties) and it arrives
ad email, notification 'closes' menu.
it's very unconfortable when several email arrives at the same time (ie
fetchmail
Package: libglade2-dev
Version: 2.6.0-3
Severity: minor
desktop:~# apt-get --purge remove `deborphan --libdevel`
Reading package lists... Done
Building dependency tree... Done
The following packages will be REMOVED:
libglade2-dev* libgnomecanvas2-dev*
0 upgraded, 0 newly installed, 2 to remove
Package: sylpheed-claws-gtk2
Version: 2.6.0-1
Severity: important
This is very easy to reproduce: get a ticket, connect sylpheed to an imap server
and leave it to idle for long enough for the ticket to expire. When the server
disconnects sylpheed (for inactivity or what ever), sylpheed will get
Package: libgd2-noxpm
Version: 2.0.33-1.1sarge1
/usr/share/doc/libgd2-noxpm/index.html starts with
body bgcolor=#FF
As a result, some browsers show it with white text on white background,
which is not very readable.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of
Package: fai-client
Version: 3.1.3
Severity: wishlist
Tags: patch
setup_harddisks should support NTFS file systems.
Below is a patch that enables setup_harddisks to create a corret fstab
entry for a NTFS partition which can be preserved. This patch does not
add support for creating a NTFS file
Package: democracyplayer
Version: 0.9.2.1-2
Severity: normal
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
When I try to change the minimum disk space preference, or the BitTorrent port
settings, they are not saved. I
can close and reoopen the prefs dialog immediately and they are back to
Package: xlhtml
Version: 0.5.1-6
Severity: normal
Tags: patch
xlhtml seg-faults on some documents. The following patch fixes the
seg-fault. However, the allocation of work-spaces and arrays don't
seems to be robust at all, so this patch probably don't fix all
cases.
On Fri, Dec 22, 2006 at 10:54:50AM +0100, Andreas Barth wrote:
severity 404143 critical
thanks
* Bastian Blank ([EMAIL PROTECTED]) [061222 01:27]:
On Fri, Dec 22, 2006 at 01:51:36AM +0100, [EMAIL PROTECTED] wrote:
Consequence: linux-image-2.6.18-3-amd63 (=2.6.18-7) is unsuitable for
Package: kqemu-modules-2.6-k7
Version: 2:2.6.18-2
Severity: normal
I installed the kqemu-modules. After a reboot, nothing occurs: qemu
complaints about missing /dev/kqemu.
So I manually installed the module (modprobe kqemu). Nothing better.
After a quick look on the internet, I found that we
Package: exim
Followup-For: Bug #146610
I went into the same issue here as reported in the bug report.
Reading your message Thomas, I found that the package exim-tls was
indeed not yet purged.
After doing so, the /etc/cron.d/exim file was gone.
So this bug can be closed now IMHO.
Kind regards,
Package: libxklavier
Version: 2.2-4
Severity: serious
Well, i am not fully sure that this is the right place to report this bug too.
When using the gnome applet to change keymaps, i get (sorry for french) :
Erreur lors de l'activation de la configuration XKB.
Cela peut arriver pour
Bastian Blank [EMAIL PROTECTED] writes:
On Fri, Dec 22, 2006 at 10:30:57AM +0100, Marc 'HE' Brockschmidt wrote:
Sorry, I don't accept this. We are talking about an *overheating*
problem, which means *broken* hardware. There needs to be at least a fix
documented in the release-notes.
Guilhem BONNEFILLE wrote:
I installed the kqemu-modules. After a reboot, nothing occurs: qemu
complaints about missing /dev/kqemu.
I was waiting for a answer in #400788, but it seems i need to workaround
it on my own :/
--
Address:Daniel Baumann, Burgunderstrasse 3, CH-4562 Biberist
Re: Andreas Barth 2006-12-16 [EMAIL PROTECTED]
yesterday, I upgraded my notebook to etch. Before that, I moved the
S??openvpn link in /etc/rc2.d to K??openvpn, because I don't use the
VPN at the moment. After the upgrade, the links was back, at S16.
This doesn't seem to be the
Package: hylafax-server
Severity: wishlist
An updated package would be welcome :)
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing'), (50, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux
Package: openoffice.org
Severity: normal
Hello,
I work on a complex document with collegues, they use it under Word.
They are troubles around table of content. A freshly saved version from
openoffice can't be printed in Word, it makes it hang. The codes around the
table of content are
Small correction.
On Fri, 22 Dec 2006, Kapil Hari Paranjape wrote:
Now suppose we get two programs that give us /usr/bin/slirp.comm.
Then we have:
/usr/bin/slirp.comm - /etc/alternatives/slirp - /usr/bin/slirp.comma
That should be:
/usr/bin/slirp.comm -
Hi Steve,
I believe we've had some other misbuilds in the past caused by the s390
buildd not having an /etc/mtab in the build environment. I think this has
been fixed now though, so maybe a rebuild is all that's needed for the
immediate problem?
I'll do yet another upload (replace my patch
On Fri, Dec 22, 2006 at 11:28:29AM +0100, Marc 'HE' Brockschmidt wrote:
Bastian Blank [EMAIL PROTECTED] writes:
On Fri, Dec 22, 2006 at 10:30:57AM +0100, Marc 'HE' Brockschmidt wrote:
Sorry, I don't accept this. We are talking about an *overheating*
problem, which means *broken* hardware.
severity 404143 important
thanks
On Fri, Dec 22, 2006 at 10:54:50AM +0100, Andreas Barth wrote:
severity 404143 critical
thanks
This bug however has the potential to damage hardware. Which is a
critical bug.
yes, but it is a very specific affected hardware range.
upstream did not issue a
On Thu, Dec 21, 2006 at 07:20:40PM -0500, Thomas Dickey wrote:
On Thu, Dec 21, 2006 at 07:00:15PM +0100, Vincent Lefevre wrote:
Package: xterm
Version: 223-1
Severity: important
Not sure this is a bug in xterm, but the following problems don't occur
with rxvt.
This sounds like
David,
Compiled and booted!! I apparently will work with voluntary preemption as
well as no premption. No oopses, flags. Next week I will start to play with
it!
thanks a lot for patience and help!
all the faced bugs will be fixed in next version.
Caveat:
Unionfs will not compile against
On Fri, Dec 22, 2006, Lior Kaplan wrote:
desktop:~# apt-get --purge remove `deborphan --libdevel`
Were you removing the sarge version?
The etch version is fixed as you state, and I don't see much more we
could do.
--
Loïc Minier [EMAIL PROTECTED]
Forget your stupid theme park! I'm gonna
Package: aptitude
Version: 0.4.4-1
Hello,
After update the package come the following message:
Preparing to replace aptitude 0.4.3-1 (using .../aptitude_0.4.4-1_i386.deb)
...
Unpacking replacement aptitude ...
dpkg: warning - unable to delete old directory `/var/lib/aptitude':
Directory not
Adam Porter [EMAIL PROTECTED] writes:
This backtrace appears to be of no use.
This is probably because your
packages are built in a way which prevents creation of proper
backtraces, or the stack frame was seriously corrupted in the crash.
Do you have any idea what is actually wrong in the
Loïc Minier wrote:
On Fri, Dec 22, 2006, Lior Kaplan wrote:
desktop:~# apt-get --purge remove `deborphan --libdevel`
Were you removing the sarge version?
Nope - the sid/etch version. That's why I wrote it's probably leftovers.
The etch version is fixed as you state, and I don't see much
severity 404143 critical
thanks
maximilian attems [EMAIL PROTECTED] writes:
On Fri, Dec 22, 2006 at 11:28:29AM +0100, Marc 'HE' Brockschmidt wrote:
Fix it or document it, I don't care. But the current state is not
releasable.
we are not talking about a patch.
what you need is an backport of
On Fri, Dec 22, 2006 at 12:09:45PM +0100, maximilian attems wrote:
On Fri, Dec 22, 2006 at 11:28:29AM +0100, Marc 'HE' Brockschmidt wrote:
Bastian Blank [EMAIL PROTECTED] writes:
On Fri, Dec 22, 2006 at 10:30:57AM +0100, Marc 'HE' Brockschmidt wrote:
Sorry, I don't accept this. We are
Sven Luther writes:
Euh, it seems to me more that the hardware has a bug which causes
normal operation to damage it.
As thus, i think that any damage done would be under the
responsability of the manufacturer to repare or fix. This seems to
be both the position of Bastian and Maximilian, and
On Thu, 21 Dec 2006 10:43:58 -0500
Yaroslav Halchenko [EMAIL PROTECTED] wrote:
I've decided to go with no prefix, since mozilla- prefix is a trademark
and point of having it nowadays is quite absent.
So now the package is simply foxyproxy. I will tag it
accordingly:
implemented-in::TODO
also sprach John Jetmore [EMAIL PROTECTED] [2006.12.21.1408 +0100]:
It's going to be until after the holidays before I can look at this in any
detail, but in the mean time have you seen the -l option? It's sort of
what you want, though it doesn't handle every option. If it doesn't meet
your
forward 400488 http://bugzilla.kernel.org/show_bug.cgi?id=7122
forward 404143 http://bugzilla.kernel.org/show_bug.cgi?id=5534
thanks
When I said there's a memory leak, that's not technically true. What
happens is that ACPI events get piled up in a queue and never
processed, due to a deadlock in
On Thu, 21 Dec 2006 22:09:05 -0500
Yaroslav Halchenko [EMAIL PROTECTED] wrote:
Hi again
Yes, it works! But it needed changing my jail.local also; that solved the
problem. Debian etch version didn't
work even changing jail.local. Keep reading.
etch version doesn't have right failregex
On Fri, Dec 22, 2006, Lior Kaplan wrote:
If you have a place you check the upgrade process - great.
If not, feel free to close the bug. I preferred to report it, than not
doing anything.
I don't understand how the bug triggers itself with the etch version.
I can understand than a sarge purge
Package: ftp.debian.org
Heya,
libnet-perl is nowadays completly included in the perl package. I have
merged the last few remaining patches recently, so there is no reason to
keep the package. It was already removed from testing, which works out
just fine, as perl-modules has a Provides:
On Fri, Dec 22, 2006 at 07:38:17AM +0100, Mike Hommey wrote:
On Fri, Dec 22, 2006 at 01:53:15AM +0100, Andreas Barth [EMAIL PROTECTED]
wrote:
* Mike Hommey ([EMAIL PROTECTED]) [061204 13:00]:
On Mon, Dec 04, 2006 at 07:50:37PM +0100, Mike Hommey [EMAIL PROTECTED]
wrote:
On Mon, Dec
On Thu, 21 Dec 2006 23:58:37 -0500
Yaroslav Halchenko [EMAIL PROTECTED] wrote:
Hi
It seems that Debian shipped vsftp comes with pam support which gets
enabled if you enable local_enable option
It comes with pam support for local users (sorry I didn't express myself
correctly) but not for
package libgd-text-perl
severity 395211 serious
thanks
For what it's worth, libgd-text-perl fails to build every time I try it under
pbuilder here, with the message reported earlier:
...
diff --normal debian/copyright_hints debian/copyright_newhints | egrep '^'
@IENDB`Dustismo is Copyright (C)
hi everyone,
i have backported the fix for this and prepared new packages. with the
holidays and all, it might some time until my sponsor gets around to do
the upload, though. so if anyone has a second to upload for me, the
files are at http://www.semistable.com/files, the version is 0.9.4-3.
On Friday 22 December 2006 01:52, you wrote:
Try
LIBGL_DEBUG=verbose glxinfo 21 /dev/null
There are complaints about missing files relating to libglide3 (attached
glx.log) and a file that doesn't seem to exist period (drirc), even via
apt-cache search. I wasn't previously aware there was a
Il giorno ven, 22/12/2006 alle 12.02 +0100, Alessandro Polverini ha
scritto:
Package: hylafax-server
Severity: wishlist
An updated package would be welcome :)
Hylafax 4.3.1 is the patest stable release of hylafax.
You are probably referring at hylafax+, a branch born during 2006 from
Package: hal
Version: 0.5.8.1-4
Severity: normal
A USB HDD with a vfat partiton is not mounted with the utf8 option.
Therefore polish diactric characters are displayed as two squares.
Consultation in #hal on freenode suggested that those options are
missing in the match key=volume.fstype
Package: kernel-image-2.4.27-3-k7
Version: 2.4.27-10sarge5
Severity: grave
Justification: breaks the whole system
Hello,
I'm using my Sarge computer with two constant XFree86 sessions on vt7 and vt8
without any trouble
for years.
This morning, as I was mailing with Mozilla (and even if don't
Package: iputils-ping
Version: 3:20020927-3.1
Severity: normal
wrong data byte #20 should be 0x14 but was 0x46
#8 8 9 a b c d e f 10 11 12 13 46 6c 6f 72 69 61 6e 20 46 6f 72 73 74 65
72 20 3c 6f 63 74
Hi,
I uploaded an NMU of your package.
Please see this as help to get the package into a releaseable condition for
etch.
Please find the used diff below.
Cheers,
Andi
diff -ur ../atlas3-3.6.0~/debian/changelog ../atlas3-3.6.0/debian/changelog
--- ../atlas3-3.6.0~/debian/changelog
tags 403849 + patch
thanks
Hi,
Attached is the diff for my bazaar 1.4.2-5.3 NMU, currently in DELAYED/5-day.
diff -u bazaar-1.4.2/debian/patches/06_neon26.dpatch bazaar-1.4.2/debian/patches/06_neon26.dpatch
--- bazaar-1.4.2/debian/patches/06_neon26.dpatch
+++
* Sven Luther ([EMAIL PROTECTED]) [061222 11:34]:
On Fri, Dec 22, 2006 at 10:54:50AM +0100, Andreas Barth wrote:
severity 404143 critical
thanks
* Bastian Blank ([EMAIL PROTECTED]) [061222 01:27]:
On Fri, Dec 22, 2006 at 01:51:36AM +0100, [EMAIL PROTECTED] wrote:
Consequence:
reassign 404176 ffmpeg
thanks
On Friday 22 December 2006 05:58, Reinhard Tartler wrote:
Adam Porter [EMAIL PROTECTED] writes:
This backtrace appears to be of no use.
This is probably because your
packages are built in a way which prevents creation of proper
backtraces, or the stack frame
severity 404121 important
thanks
* Itai Seggev ([EMAIL PROTECTED]) [061221 11:56]:
It appears that in order build boot splash, you must select the VESA
driver. However, the VESA driver is not available on powerpc (and I
presume other x86 platforms).
I fail to see how this is a serious bug.
On Fri, Dec 22, 2006 at 12:53:09PM +0100, Marc 'HE' Brockschmidt wrote:
severity 404143 critical
thanks
maximilian attems [EMAIL PROTECTED] writes:
On Fri, Dec 22, 2006 at 11:28:29AM +0100, Marc 'HE' Brockschmidt wrote:
Fix it or document it, I don't care. But the current state is not
Package: yelp
Version: 2.14.3-1
Severity: minor
There's outdated info in yelp stating that g-s-m has 2 tabs, but it
has 3: Processes, Resources, Devices, and also with screenshots
showing just the 2 tabs.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500,
package kdepim
severity 404157 normal
thanks mate
Hi
The package doesn't fail in a clean chroot (when all Build-Depends are
installed), so this bug is not RC. It only FTBFS on systems where
autoconf2.13 is installed next to autconf, so it doesn't warrant
important severity neither IMHO.
On 2006-12-22 06:27:26 -0500, Thomas Dickey wrote:
If there's no new information here, there's nothing to fix (the
fixes are in ncurses 5.5, and there's no way other than by breaking
the related fixes for luit to make ncurses 5.4 work as you want).
The problem is that Debian/stable still
1 - 100 of 310 matches
Mail list logo
