On 21 Nov 2003 at 11:05, John Peter wrote:
Roberto is right - don't let yourself be intimidated with it !
Put everything on paper and follow the guide step by step, you will
succed and it's not that hard - it just seems so...
Don't forget to unninstall and clean everything you did
Scarletdown wrote:
On 21 Nov 2003 at 0:09, Roberto Sanchez wrote:
No no no no! Don't start over. If you have
headers, there
is no need to make anything. I originassy thought
you were
going to install kernel-sources. Since you
installed headers,
just go ahaed an remake the driver module.
On 21 Nov 2003 at 2:25, Roberto Sanchez wrote:
You probably have a compiler version mismatch (i.e.,
the kernel was
compiled with a slightly different version of gcc
than what you have
installed. I recommend that you just get the full
sources, customize,
and build your kernel, then build the
Scarletdown wrote:
http://newbiedoc.sourceforge.net/system/kernel-pkg.html
Hopefully it won't come to that though. Sadly, I took
a look through those instructions and
found myself rather overwhelmed (time to go take an
Ibuprofen and read through them
again...)
To slove the AGPGART problem,
Roberto Sanchez wrote:
Scarletdown wrote:
http://newbiedoc.sourceforge.net/system/kernel-pkg.html
Hopefully it won't come to that though. Sadly, I took
a look through those instructions and found myself rather overwhelmed
(time to go take an
Ibuprofen and read through them again...)
To slove
Scarletdown wrote:
On 19 Nov 2003 at 10:37, Scarletdown wrote:
On 19 Nov 2003 at 9:48, Roberto Sanchez wrote:
Not only that, this is what it says in the release notes:
At the current time, the nForce drivers require a 2.4 series kernel.
Frm the screen shot, it looks like a 2.2.20 kernel.
On 20 Nov 2003 at 2:01, Roberto Sanchez wrote:
Execute the following (this assumes /usr/src/linux
points to your
current kernel source):
cd /usr/src/linux
cp /boot/config-2-4-18-your version .config
make oldconfig
make dep
After all that, it should work.
That didn't work, because I
* Scarletdown [EMAIL PROTECTED] [031120 15:26]:
On 19 Nov 2003 at 10:37, Scarletdown wrote:
On 19 Nov 2003 at 9:48, Roberto Sanchez wrote:
Not only that, this is what it says in the release notes:
At the current time, the nForce drivers require a 2.4 series kernel.
On 20 Nov 2003 at 17:57, Nick Hastings wrote:
Looks like you need to install the kernel-headers
package that goes
which your kernel-image package (assuming you are
using a prepackaged
Debian kernel).
# apt-get install kernel-headers-`uname -r`
then make a symlink to /usr/src/linux
On Thursday 20 November 2003 10:40, Scarletdown wrote:
On 20 Nov 2003 at 17:57, Nick Hastings wrote:
Looks like you need to install the kernel-headers
package that goes
which your kernel-image package (assuming you are
using a prepackaged
Debian kernel).
# apt-get install
On 20 Nov 2003 at 11:00, Alexander Rink wrote:
apt-get install kernel-headers-`uname -r` will
fetch that missing files from
a debian server for you.
And that makes for a nice little catch-22 situation.
The whole reason I'm doing this is so I can
get the nVidia nForce drivers installed.
On Thursday 20 November 2003 11:12, Scarletdown wrote:
And that makes for a nice little catch-22 situation.
The whole reason I'm doing this is so I can
get the nVidia nForce drivers installed. Without
them, neither of the on-board NICs work (or
the sound for that matter). So there is no way
Scarletdown wrote:
On 20 Nov 2003 at 11:00, Alexander Rink wrote:
apt-get install kernel-headers-`uname -r` will
fetch that missing files from
a debian server for you.
And that makes for a nice little catch-22 situation.
The whole reason I'm doing this is so I can
get the
On Thursday 20 November 2003 11:33, Alexander Rink wrote:
On Thursday 20 November 2003 11:12, Scarletdown wrote:
And that makes for a nice little catch-22 situation.
The whole reason I'm doing this is so I can
get the nVidia nForce drivers installed. Without
them, neither of the
On 20 Nov 2003 at 10:39, John Peter wrote:
No problem there - you did install from a cd right?(you must have,
as you don't have connectivity).
Use apt-cdrom add to put your install cd in your sources and
I did that, and inserted the disk that has the kernal headers (disk 6).
Scarletdown wrote:
On 20 Nov 2003 at 10:39, John Peter wrote:
No problem there - you did install from a cd right?(you must have,
as you don't have connectivity).
Use apt-cdrom add to put your install cd in your sources and
I did that, and inserted the disk that has the kernal headers (disk
On 20 Nov 2003 at 19:41, Roberto Sanchez wrote:
Scarletdown wrote:
On 20 Nov 2003 at 10:39, John Peter wrote:
Couldn't find package kernal-headers-2.4.18-bf2.4
^^
Kernel is spelled with two e's and no a's. Could
that be the problem?
That's possible. I
On 20 Nov 2003 at 2:01, Roberto Sanchez wrote:
Execute the following (this assumes /usr/src/linux
points to your
current kernel source):
cd /usr/src/linux
cp /boot/config-2-4-18-your version .config
make oldconfig
make dep
After all that, it should work.
The headers are now
Scarletdown wrote:
On 20 Nov 2003 at 2:01, Roberto Sanchez wrote:
Execute the following (this assumes /usr/src/linux
points to your
current kernel source):
cd /usr/src/linux
cp /boot/config-2-4-18-your version .config
make oldconfig
make dep
After all that, it should work.
The headers are
On 20 Nov 2003 at 22:01, Roberto Sanchez wrote:
cd /usr/src/
ln -s kernel-headers-2.4.18-bf2.4 linux
cd linux/
Okay. I just gave that a try, and then running make
oldconfig still gives me the
No rule to make target `oldconfig'. Stop error.
I think I'm just going to have to go ahead and
Scarletdown wrote:
On 20 Nov 2003 at 22:01, Roberto Sanchez wrote:
cd /usr/src/
ln -s kernel-headers-2.4.18-bf2.4 linux
cd linux/
Okay. I just gave that a try, and then running make
oldconfig still gives me the
No rule to make target `oldconfig'. Stop error.
I think I'm just going to have
On 21 Nov 2003 at 0:09, Roberto Sanchez wrote:
No no no no! Don't start over. If you have
headers, there
is no need to make anything. I originassy thought
you were
going to install kernel-sources. Since you
installed headers,
just go ahaed an remake the driver module.
Just for the
I have been using a A7N8X Deluxe with Debian for
about a month now and
have been extremely happy with it. One thing to
remember is to boot
with noapic nolapic kernel parameters. Do some
googling if you want
to know more. I have been using the forcedeth
driver for a week now and
nothing
On Wednesday 19 November 2003 10:22, Scarletdown wrote:
snip
I downloaded the drivers from nVidia and followed
their instructions for installing them...
tar -xvzf *gz (since I didn't want to type in the
rather lengthy file name)
cd nforce
make
make install
make and make install gave me
Alexander Rink wrote:
On Wednesday 19 November 2003 10:22, Scarletdown wrote:
snip
I downloaded the drivers from nVidia and followed
their instructions for installing them...
tar -xvzf *gz (since I didn't want to type in the
rather lengthy file name)
cd nforce
make
make install
make and make
On 19 Nov 2003 at 9:48, Roberto Sanchez wrote:
Not only that, this is what it says in the release notes:
At the current time, the nForce drivers require a 2.4 series kernel.
Frm the screen shot, it looks like a 2.2.20 kernel.
Well, I downloaded everything from here:
On 19 Nov 2003 at 10:37, Scarletdown wrote:
On 19 Nov 2003 at 9:48, Roberto Sanchez wrote:
Not only that, this is what it says in the release
notes:
At the current time, the nForce drivers require a
2.4 series kernel.
Frm the screen shot, it looks like a 2.2.20
kernel.
Well,
On 19 Nov 2003 at 10:37, Scarletdown wrote:
On 19 Nov 2003 at 9:48, Roberto Sanchez wrote:
Not only that, this is what it says in the release notes:
At the current time, the nForce drivers require a 2.4 series kernel.
Frm the screen shot, it looks like a 2.2.20 kernel.
Scarletdown wrote:
Has anyone here managed to successfully get Debian
working on an A7N8X Deluxe
motherboard? I especially need to make sure that both
on-board NICs (nVidia nForce MCP
and 3Com 3C920B-EMB), and the on-board sound (nVidia
nForce) will work.
Go to the nVidia site and download the
On approximately Tue, Nov 18, 2003 at 11:50:04PM -0500, Roberto Sanchez wrote:
Scarletdown wrote:
Has anyone here managed to successfully get Debian
working on an A7N8X Deluxe
motherboard? I especially need to make sure that both
on-board NICs (nVidia nForce MCP
and 3Com 3C920B-EMB), and
Josh McKinney wrote:
I have been using a A7N8X Deluxe with Debian for about a month now and
have been extremely happy with it. One thing to remember is to boot
with noapic nolapic kernel parameters. Do some googling if you want
to know more. I have been using the forcedeth driver for a week
31 matches
Mail list logo
