Hola a todos...
Normalmente, tengo dos nucleos para alternar con lilo, ahora tengo 2.0.35 y
36. Ahora que ha salido el 2.2, tengo la duda de si se puede alterna uno de
la serie 2.0 y otro de la 2.2, o este ultimo necesita binarios que en la
anterior pueden producir problemas.
Por cierto, no se
TooManySecrets wrote:
Veamos... Si bien es cierto que el SVGA rula bien, una vez que se ha
terminado la instalación, y se ha instalado el parche para la S3V, se vuelve
a poner el servidor SV3 y rula todo a las mil maravillas... Lo digo por
experiencia.
Vaya, yo pensando que era algún
Vicenç Masanas wrote:
Durante el boot obtengo este mensaje donde segun parece se desactiva el
DMA:
hdb: timeout waiting for DMA
hdb: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
hda: DMA disabled
hdb: DMA disabled
ide0: reset: success
hdb1
[...]
Así a bote
Hernan Mauricio Velasquez Nino wrote:
Tengo una base de datos, con nombre xxx la cual cree con algunas tablas.
Debo crear otra base de datos yyy. Lo hago con tanto con el
comando createdb como con psql y create database, y en ambos casos me crea
la base de datos yyy pero le copia dos
Hola,
He buscado por todas partes el paquete ssh y no lo encuentro, sin
embargo, estoy casi seguro que existía en paquete debian.
¿Sabe alguien si existe o existió alguna vez?
saludos
--
Nicolás García - Pedrajas
Department of
Hola a todos:
Tengo un compañero de trabajo que está teniendo problemas para
arrancar el entorno de ventanas X, porque parece que la version de XFree
que tiene (3.3.3) no soporta su tarjeta (3D Blaster Banshee). La version
3.3.3.1 tampoco hace mención de la misma (o al menos no la hemos
On Tue, Feb 09, 1999 at 06:42:54AM +0100, Angel Vicente Perez wrote:
Hola a todos...
Normalmente, tengo dos nucleos para alternar con lilo, ahora tengo 2.0.35 y
36. Ahora que ha salido el 2.2, tengo la duda de si se puede alterna uno de
la serie 2.0 y otro de la 2.2, o este ultimo necesita
[EMAIL PROTECTED] wrote:
Hola,
He buscado por todas partes el paquete ssh y no lo encuentro, sin
embargo, estoy casi seguro que existía en paquete debian.
¿Sabe alguien si existe o existió alguna vez?
saludos
Si existe, está en Debian non-Us
La terminología en trastos de comunicaciones en general, y en
cacharros para conectividad de ordenadores en particular está tan
machacada, que muchas veces es difícil de decir... Pero normalmente:
. Un HUB suele ser un concentrador relativamente pasivo
(aunque hoy día casi seguro
Creo que el swhitch es más inteligente que el hub, pues éste sólo se limita
a guiar las
salidas a las distintas bocas, mientras que el otro puede hacer más cosas como
conmutar de
100/10 y saber a quién tiene que enviar una salida...
TooManySecrets escribió:
Buenas.
Necesitaría cierta
On Fri, 5 Feb 1999, Jesús Pérez Franco - PROVISIONAL wrote:
Hola, soy un estudiante de la Escuela Superior de Ingenieria de Cadiz
y estoy realizando el proyecto de fin de carrera utilizando la libreria
XFORMS. No encuentro los ejemplos (DEMOS) sobre la herramienta fdesign
que aparencian
Estoy buscando un entorno gráfico para linux; ya he visto el visual-tcl.
¿ Hay más ?
Un saludo,
David
David preguntó:
Estoy buscando un entorno gráfico para linux; ya he visto el visual-tcl.
¿ Hay más ?
Hce unos dias Marcelo Magallón sugirió Fast Light Tool Kit para c++
(paquetes libs/libfltk0 y devel/libfltk-dev).
Yo los ensayé y quedé muy bien impresionado. Funciona muy, bien está
bien
pido disculpas por la dirección que envie en el mensaje anterior que
está mal. La dirección correcta es:
http://fltk.easysw.com
(The Fast Light Tool Kit)
Jaime Villate
Universidad de Oporto
David wrote:
Estoy buscando un entorno gráfico para linux; ya he visto el visual-tcl.
¿ Hay más ?
Echale un vistazo a xforms.
Saludos,
Octavio
Hola a todos!!
Acabo de empezar a usar el linux y tengo un monton de dudas. Una de
ellas es saber como crear un ejecutable despues de haber compilado un
archivo en c++ o c. Al compilarlo me da uno con extension .out y despues
que se hace para correrlo.
Si tengo archivos fuentes de un programa,
¿Tienes alguna especie de firewall configurado?
Ya me funciona :). Tenia el kernel configurado para firewall y algunas
opciones más que de momento no necesito. Alguna de estas me bloqueaba la
conexión. Gracias a todos por la ayuda, especialmente a Hue-Bond.
Un saludo,
Jon
Um el caso es que yo la vi cuando fui a la editorial a recoger
mi cheque de la colaboración del número 5 (hace una semana)... no la he
visto en los kioskos sin embargo... y me da la impresión (aunque no lo he
confirmado) que los de la editorial pretenden retrasar el número 6 para que
On 09-Feb-99 Alejandro Bratti wrote:
Hola a todos!!
Acabo de empezar a usar el linux y tengo un monton de dudas. Una de
ellas es saber como crear un ejecutable despues de haber compilado un
archivo en c++ o c. Al compilarlo me da uno con extension .out y despues
que se hace para correrlo.
Antonio Castro wrote:
Acabo de arrancar las x y luego el netscape, para que puedas comparar.
Te recuerdo que mi swap está algo sobre dimensionada. Mira la última
línea que te mando relativa al estado de la memoria. Yo tengo casi toda
la memoria libre. Tu tienes casi toda la memoria ocupada.
On Tue, Feb 09, 1999 at 07:29:20PM +, Octavio Rodriguez Perez wrote:
Pero claro, al leer ahora estos mensajes de la lista, y ver que el
problema aparece con programas completamente diferentes, creo que el bug
es del programa top que en algunos casos no indica correctamente la
cantidad de
Pues eso que rm -r no me funciona.
Si hago rm -r *.html en un directorio no baja a los siguientes. ALguien
sabria por que pasa eso??
Es el de hamm
--
Antonio Calvo Rodriguez
[EMAIL PROTECTED]
Vigo/Galicia/España
--
Hola, Antonio!
Si hago rm -r *.html en un directorio no baja a los siguientes. ALguien
sabria por que pasa eso??
Bueno, es que no deberia hacerlo. La shell sustituye la estrella por
los nombres de los ficheros antes de que rm haga nada, asi que para rm es como
si le hubieras dicho
rm -r
El Mon, Feb 08, 1999 at 02:37:25PM -0300, Felipe Sanchez decías:
Holas,
Hace un tiempo hice esta misma consulta, pero como todavía no logro
solucionarlo intento de nuevo.
El problema es que bajo email desde dos casillas, mi ISP y mi trabajo.
Como no quiero mezclar lo que manejo en el
Muchas gracias a todos por vuestras contestaciones. Pongo ésta aquí para
quien le pueda interesar. Al menos, es de las que me han llegado cuando he
cogido el correo a las 14:30 h., y que creo de interés general.
Repito muchas gracias a todos por vuestras contestaciones y rapidez.
Jesus M.
[EMAIL PROTECTED] el día Tue, Feb 09, 1999 at 09:49:52AM +0100 expuso lo
siguiente:
Hola,
He buscado por todas partes el paquete ssh y no lo encuentro, sin
embargo, estoy casi seguro que existía en paquete debian.
¿Sabe alguien si existe o existió alguna vez?
Al menos yo lo tengo tanto
JuanjoC PianoTuner el día Tue, Feb 09, 1999 at 07:05:45AM + expuso lo
siguiente:
TooManySecrets wrote:
Veamos... Si bien es cierto que el SVGA rula bien, una vez que se ha
terminado la instalación, y se ha instalado el parche para la S3V, se vuelve
a poner el servidor SV3 y rula todo
Resulta que me he cargado la imagen del núcleo... bueno, quise copiar
/vmlinuz de Slackware3.5 al directorio raíz de Debian2.0... quería hacer:
cp -a /mnt/vmlinuz /svmlinuz
pero sin querer omití la `s' que debería darle un nombre diferente al de la
imagen de Debian e hice:
cp -a /mnt/vmlinuz
Howdy All...
Is there an X-based programming environment like Visual Basic, or Visual
C++??? Any help woule be appreciated.
Thanks,
Brant
__
Get Your Private, Free Email at http://www.hotmail.com
I would also look at installing the gs-aladdin package from the non-free
part of Debian. It has a special HP Deskjet driver compiled into it.
You can specify lots of features such as print quality, color mode,
paper type, etc. See the gs-hpdj man page once it is installed. You
then will have
Let's say that I have some program I need to run that will take several
hours, and that I want to end my login session so I don't have to worry
about curious passersby coming and doing terrible things while my account is
logged on. It seems that there should be some way to accomplish this. Is
On Mon, 8 Feb 1999, Branden Robinson wrote:
On Sun, Feb 07, 1999 at 11:19:07AM -0800, Paul Nathan Puri wrote:
I recently upgraded to potato.
Now X starts and immediately dies. Why would this be?
This is (probably) a known bug in -9. Upgrade to -10.
What are the minimum packages
AW == Aaron Walker [EMAIL PROTECTED] writes:
AW how would I go about setting up debian for regular non-anonymous
AW ftp?
It is enabled by dafault. I would install the proftpd package, as it
is better than the default ftp daemon.
AW and also, can someone tell me or guide to a doc how do setup
On 08-Feb-99 [EMAIL PROTECTED] wrote:
I have three computers on a LAN. I want to run an application in one of
them and have the display output showing on the other two at the same
time. I guess what I'm trying to do is something like MS netmeeting. Is
this possible?
Try XMX (X multiplexer).
Robert-Jan Kuijvenhoven:
The problem is that dselect fails to connect. Dselect shows the following
message:
Connecting to ftp.debian.org
Failed to connect
The ftp program normally doesn't dial the modem for you, because it doesn't
know whether you aren't just intending to use the ethernet,
man hohup.
--
John Hasler
[EMAIL PROTECTED] (John Hasler)
Dancing Horse Hill
Elmwood, WI
On Mon, Feb 08, 1999 at 18:26 -0500, Branden Robinson wrote:
On Mon, Feb 08, 1999 at 12:06:30PM -0800, Kenneth Scharf wrote:
What happens in 32bpp?? I do not believe that video dac's are
available wider than 8 bits. If they are, are 3 10 bit dac's used,
with the extra 2 bits thrown away?
On Mon, 8 Feb 1999, Richard Hall wrote:
On Mon, 8 Feb 1999, Shaleh wrote:
On 08-Feb-99 Richard Hall wrote:
I went ahead and did 'chmod 666 /dev/audio' and that made workman work. I
really hate doing that, though. It seems like there should be a way to
make /dev/audio available
On Mon, 8 Feb 1999, Shaleh wrote:
Here is my /dev/audio
prompt$ ll /dev/audio
crw-rw 1 root audio 14, 4 Jul 20 1998 /dev/audio
run 'groups' as the user. If audio appears then the above should work, it
does
on every one of my machines.
If audio is not listed as one
On Mon, Feb 08, 1999 at 16:01 -0800, Brant Wells wrote:
Howdy All...
Is there an X-based programming environment like Visual Basic, or Visual
C++??? Any help woule be appreciated.
Look! There goes the neighbourhood! (Sorry, couldn't resist it ;) I believe
there is a project to create a
On Mon, Feb 08, 1999 at 06:31:35PM -0600, Oleg Krivosheev wrote:
hi
why -10 insists on having tons of stuff installed i really
don't use?
like xfs, or rstart(d), or twm (is there any person alive who
uses twm?), or xmh, or xterm, or...
It doesn't. Read the extended description of the
On Mon, Feb 08, 1999 at 07:59:38PM +, Olafur Jens Sigurdsson wrote:
On 07. febrúar 1999, Mauro Mazzieri wrote:
Lance Hoffmeyer wrote:
When loading the kernel I get
ppa: Version2.03 (for Linux 2.2.0)
Warning - no ppa compatible devices found. My zipdrive is connected to
my
On Tue, 9 Feb 1999, M.C. Vernon wrote:
It has to be said that I can only play CDs as root, despite chgrping
/dev/cdrom to audio, and adding myself to /dev/cdrom
OK, so all I had to do was make /dev/hdc world-readable sigh
Matthew
--
Elen sila lumenn' omentielvo
Steward of the Cambridge
Rob Mahurin wrote:
Let's say that I have some program I need to run that will take several
hours, and that I want to end my login session so I don't have to worry
about curious passersby coming and doing terrible things while my account is
logged on. It seems that there should be some way
On Mon, 8 Feb 1999, Alec Smith wrote:
I use my DeskJet 870Cse with Linux, with good results. A comparable model
on the market today would be roughly the 895Cse, so long as you've got the
parallel version.
Once you have the printer, just use magicfilter's dj550 filter and edit
/etc/printcap
Hi,
I'm currently helping upgrade a server running Debian 2.0 to the 2.2 kernel.
We've managed to satisfy most of the dependencies mentioned in the kernel
documentation other than the NFS one - the changes file suggests 2.2beta40,
while the latest Debian package I've been able to find is
I'm working to get X11R6 on my Compaq Contura 410 (486DX2-50, 20MB, 2GB,
external monitor) working. Last time i had still a problem with the
trackball, -just forgot insmod psaux- it is resolved now.
But the server starts, shows the background and mousepointer and shuts
down. I get following
On Mon, Feb 08, 1999 at 05:45:18PM -0600, Kelly Corbin wrote:
Question. Does anyone know where to get xpr for Debian or something
like it? XPR takes an XWD (x-window dump file) an converts it into a
Post-script file. If anyone knows where to get it or another program
like it that converts
Scenario: my machine is on but hasn't been used for several hours when
I notice the hard drive taking lots of hits. I log on and run 'top'
which tells me a 'find', owned by root, is using 25% of the CPU. 'ps -ef',
even as root, doesn't show the 'find'.
Question: how do I figure out who started
Scenario: my machine is on but hasn't been used for several hours when
I notice the hard drive taking lots of hits. I log on and run 'top'
which tells me a 'find', owned by root, is using 25% of the CPU. 'ps -ef',
even as root, doesn't show the 'find'.
Question: how do I figure out who started
On Mon, Feb 08, 1999 at 06:23:46PM -0800, Eric House wrote:
I notice the hard drive taking lots of hits. I log on and run 'top'
which tells me a 'find', owned by root, is using 25% of the CPU. 'ps -ef',
even as root, doesn't show the 'find'.
Question: how do I figure out who started that
On Tue, Feb 09, 1999 at 01:16 +, M.C. Vernon wrote:
On Mon, 8 Feb 1999, Richard Hall wrote:
On Mon, 8 Feb 1999, Shaleh wrote:
On 08-Feb-99 Richard Hall wrote:
I went ahead and did 'chmod 666 /dev/audio' and that made workman work.
I
really hate doing that, though.
Well, color might not be quite to the level of Winblows, but its passable.
There is a version of gs-aladdin that includes DeskJet 850 support, but I
haven't bothered to build it from source yet. (DJ850 isn't included in the
standard build). Webpages print fine.
At 05:33 PM 2/8/99 -0800, Syrus
Eric House writes:
Scenario: my machine is on but hasn't been used for several hours when
I notice the hard drive taking lots of hits. I log on and run 'top'
which tells me a 'find', owned by root, is using 25% of the CPU.
About 5AM? probably cron running updatedb to update the database used
How do I search and replace 'hard-returns' or 'line-breaks'? I searched
dejanews and the only thing I could find was to use C-q 'Enter' 'Enter'
with Alt-Shift %, but when I try this I get 'No search patterns found'.
Thanks Lance
On Mon, 8 Feb 1999, Lance Hoffmeyer wrote:
How do I search and replace 'hard-returns' or 'line-breaks'? I searched
dejanews and the only thing I could find was to use C-q 'Enter' 'Enter'
with Alt-Shift %, but when I try this I get 'No search patterns found'.
Thanks Lance
Lance
You use
On Tue, 9 Feb 1999, Dave Swegen wrote:
[snip]
It has to be said that I can only play CDs as root, despite chgrping
/dev/cdrom to audio, and adding myself to /dev/cdrom
Correct me if I'm wrong, but if you are using shadow passwords just adding
a user to /etc/group manually is not
Hi all
I am trying to reconfigure my serial ports and am having no luck. At
the moment, I have my mouse on /dev/ttyS0 and an internal modem on
/dev/ttyS1.
What I want to do is put my modem on /dev/ttyS2 IRQ7 so that I can use
the built in serial board (that I presume exists on my mother board)
Ok, I'm at wits end here... 3 days and 5 ... yes FIVE installs of 98
later I've decided that I HATE windows... and would realy realy love
to dump it. However, My school (Milligan, www.milligan.edu) uses
a Microsoft Proxy Sever/Client v2.0 (MAJOR YUCK) on the schools
network... and I can't
Having made the decision to grit my teeth and buy a whole new machine,
I'm giving a lot of thought to what video card to buy. My current one
(which will continue to live with us) has some cheapo SVGA card and uses
3dfx for Quake.
I really like TNT though, and it would be nice to buy a 2D/3D card
Brant Wells [EMAIL PROTECTED] writes:
Is there an X-based programming environment like Visual Basic, or Visual
C++??? Any help woule be appreciated.
Dunno if it's true, but I heard that Metrowerks is planning on porting
their IDE to linux/X11.
morgan
--
Date forwarded: 9 Feb 1999 04:41:28 -
To: Brant Wells [EMAIL PROTECTED]
Copies to: debian-user@lists.debian.org
Subject:Re: X based developer
From: Morgan Fletcher [EMAIL PROTECTED]
Date sent: 08 Feb 1999
I have two pcs at home with net-work cards, PC-A PC-B. In PC-A there is
no CDROM drive, I installed Debian Linux base from floppies. In order to
make room for Linux, I had to get rid of Windows 95 at PC-A, but I have
kept DOS6.22 Windows3.1. Now, I can't connect to my Win95 PC-B using
Windows
How about the crude approach of yanking the HD out of box A and install in
B? While sounding painful, doing that with a change of jumpers to
accomodate the slave (if needed) can go quite quickly.
Or take a laplink approach? (I've never used it, but believe it does what
you want ...)
Kenward
I need libXt.so.6 to run both netscape and wordperfect. Is there a package
that contains this package? I very much need it.
On another note, what's going on with irc.debian.org? Is it down. It is
usually very helpful in discovering which package a given file is in. Hmmm.
Thanks,
NatePuri
Anthony Campbell wrote:
don't - in fact, I've even wired my speaker through the turbo switch so
it's off most of the time!
Hm, do you dislike beeps or what? It's pretty trivial to patch the kernel to
disable beeps, I could make a loadable module that disabled kernel beeps
while it was loaded in
I am trying to setup debian from the official cdrom. As suggested I boot
from cd,
comnfigure keuyboard, swap and linuz partitions, initialize anda mount than.
After
that point installation step is the next. But when I start to install an
error occured indicating
that unable to mount /dev/loop0 to
Since I upgraded to slink, for some reason syslog reports all its times in
GMT (which isn't a big problem), and cron does its stuff according to GMT
(which is a big problem, because updatedb goes off in the middle of the
afternoon instead of at 6am, which is a real pain).
Does anyone know why its
I've just downloaded the whole cdrom, which I believe is the lasted one.
I'am using
binaries for installation. Did not do anything about activation loop0 in the
kernel.
Regards,
Gokhan Alganatay
-Original Message-
From: Robbie Davidson [EMAIL PROTECTED]
To: debian-user@lists.debian.org
Hi Matthew,
I'm currently helping upgrade a server running Debian 2.0 to the 2.2 kernel.
We've managed to satisfy most of the dependencies mentioned in the kernel
documentation other than the NFS one - the changes file suggests 2.2beta40,
while the latest Debian package I've been able to find
On Mon, Feb 08, 1999 at 11:11:21PM -0500, Richard Black wrote:
Hi,
[..]
First I changed the jumpers on my model to COM3 IRQ 7 (an unused IRQ)
the irq 7 is mostly used by the printerdevice.
io 0x378 irq=7
[..]
maybe You can try the irq 9 ?
--
Peter Berlau
[EMAIL PROTECTED]
i want to write a little shell script called addmailuser w/c executes
adduser --conf /etc/mailuser.conf where mailuser.conf contains info like
making their default shell /bin/false.
in dos, that addmailuser file will simply contain adduser --conf
/etc/mailuser.conf %1 where %1 is the first
Thanks for your comments
I ended up fixing the problem by manually editing the config file (the one
that says do not edit !) - I can't remember the name of it now though
(back in Windows land).
I got the settings from my windows netscape config file and away I went.
No probs so far.
Ivan.
At
I'm having fun here :)
I've got the system setup to handle my ISP almost perfectly (still am
having a problem with fetchmail not responding to all requests properly),
now I've got a problem with the network at home.
I installed Debian telling it that I was on a network (the home network,
two
Robert King wrote:
Since I upgraded to slink, for some reason syslog reports all its times in
GMT (which isn't a big problem), and cron does its stuff according to GMT
(which is a big problem, because updatedb goes off in the middle of the
afternoon instead of at 6am, which is a real pain).
On Mon, Feb 08, 1999 at 11:11:21PM -0500, Richard Black wrote:
[...]
What I want to do is put my modem on /dev/ttyS2 IRQ7 so that I can use
the built in serial board (that I presume exists on my mother board) on
/dev/ttyS1 (irq 3) for other stuff.
First I changed the jumpers on my model to
On Mon, Feb 08, 1999 at 09:08:04PM +0100, Martin Saturka wrote:
Hello,
can somebody tell me, how HP DJs work in Linux? Which of them works
well? I want to buy one, but I don't know what are doing nice results
(690C, 880C, ...???). Thanks a lot, Martin
They work very well PROVIDED you
Hello!
I've just installed linux debian and my network card ICL Etherteam PCI
wasn't added correctly to the system. I know that the chipset in the
card is an AMD PCNet. I think the driver installation wasn't successful
because the irq and IO address weren't corrects, but I don't know what
is
I want to write a little shell script called addmailuser w/c
executes adduser --conf /etc/mailuser.conf where mailuser.conf
contains info like making their default shell /bin/false. in dos,
that addmailuser file will simply contain adduser --conf
/etc/mailuser.conf %1 where %1 is the first
I have just installed X-Windows on my Dell P2 PC with a Microsoft
IntelliMouse.
However X-Windows complains:
Warning: /dev/psaux unable to get status of mouse fd (Inappropriate ioctl
for device)
and the mouse does not work properly - it appears to be stuck in a window
enlarge
On Mon, 8 Feb 1999, Robert V. MacQuarrie wrote:
On Tue, 9 Feb 1999, M.C. Vernon wrote:
On Tue, 9 Feb 1999, M.C. Vernon wrote:
It has to be said that I can only play CDs as root, despite chgrping
/dev/cdrom to audio, and adding myself to /dev/cdrom
OK, so all I had to do was make
Richard Black wrote:
Hi all
I am trying to reconfigure my serial ports and am having no luck. At
the moment, I have my mouse on /dev/ttyS0 and an internal modem on
/dev/ttyS1.
What I want to do is put my modem on /dev/ttyS2 IRQ7 so that I can use
the built in serial board (that I presume
On Mon, Feb 08, 1999 at 22:30:58 -0800, Paul Nathan Puri wrote:
I need libXt.so.6 to run both netscape and wordperfect. Is there a package
that contains this package?
xlib6 in oldlibs.
On another note, what's going on with irc.debian.org? Is it down.
irc.debian.org is a rotating DNS name;
On Mon, Feb 08, 1999 at 18:10:31 +, Jose L. Gomez Dans wrote:
I was told to move to Fortran to do some work, so it's not my fault :)))
I don't have anything to do with Fortran :))) Anyway, I downloaded the
pgplot graphic libraries, and tried compiling an example program.
Apparently,
I am running Hamm very happily on a machine sitting in an ISP.
However, it can't access the SCSI controller and I need to fix that
(very nervously). I am advised that the ncr based controller is likely
to be happier with the 2.0.35 or 2.0.36 kernel, though it may still
need a driver/module
I am unable to connect to my Leafnode server from my workstation
running Netscape.
I an running a server system with Debian hamm and some slink packages
advised by security advisories and a workstation with hamm and some
slink packages including Netscape 4.06. I have installed and
configured
On 08 Feb 1999q, Joey Hess wrote:
Anthony Campbell wrote:
don't - in fact, I've even wired my speaker through the turbo switch so
it's off most of the time!
Hm, do you dislike beeps or what? It's pretty trivial to patch the kernel to
disable beeps, I could make a loadable module that
Robert-Jan Kuijvenhoven:
ppp.log:
...
send (ATZ^M)
expect (OK)
^M
NO CARRIER
-- Failed
Failed (NO CARRIER)
Connect script failed
exit.
That sounds as if ppp (or chat) is sending `ATZ' to the modem, expecting to
get back `OK' but getting `NO CARRIER' instead. Is that right?
That'd
Hello,
[bash]$ whoami; dpkg -i filename.deb
mblevin
dpkg: `ldconfig' not found on PATH.
dpkg: `start-stop-daemon' not found on PATH.
dpkg: `install-info' not found on PATH.
dpkg: `update-rc.d' not found on PATH.
dpkg: 4 expected program(s) not found on PATH.
I wrote:
Why are those
Kent West:
You can then go one step further and set up CONFIG.SYS AUTOEXEC.BAT to
offer the choice of which OS you want to boot into.
You can go a step further still and set up autoexec to run one or the other
depending on the presence of a particular file, so you can switch from one
to the
Hello,
Bal K. Paudyal:
I have two pcs at home with net-work cards, PC-A PC-B. In PC-A there is
no CDROM drive, I installed Debian Linux base from floppies. In order to
make room for Linux, I had to get rid of Windows 95 at PC-A, but I have
kept DOS6.22 Windows3.1. Now, I can't connect to
[EMAIL PROTECTED]:
I have three computers on a LAN. I want to run an application in one of
them and have the display output showing on the other two at the same
time. I guess what I'm trying to do is something like MS netmeeting. Is
this possible?
I'm not familiar with netmeeting, and others
Hello,
if someone is interested in, I just succeeded installing the KDE-1.1Pre2
debian packages from the kde.org server on a mostly pure Hamm
system. Here's a list of what needed to be done on my machine:
- kdebase depends on the following packages that need to be upgraded
I've got a HP LaserJet IIIp and chosen hpjet3 in magicfilterconfig.
But when printing my LaTeX files with dvips the left margin is greater than
I told to.
Can you help me.
Hi,
some sites mail spam rejects my mail because my hostname is not
qualified.
So how do I config smail to make sure my host name is qualified. I
had a look at the man page about /etc/smail/qualify... but don't really
understand what to do with it...
Thx.
Shao.
Ciao,
tra i vari script in /etc/ppp/ip-up ho messo uno che fa:
/usr/sbin/pppstats -w 10 >> /var/log/pppstats.log
dato che viene avviato da pppd, ha owner root, anche se 'pon' lo lancio da
user normale.
Quando mi disconnetto, con 'poff', killo il programma, ma mi dice:
Hello everybody, having problems with your SoundBlaster card. I
recommend to recompile the kernel and to set the irq, ports, etc.
Don't forget to say yes to the sound devices. I know, compiling the kernel
is not the easiest thing and eats time, but it's worth this. Your new kernel
perfectly fits
I've got a HP LaserJet IIIp and chosen hpjet3 in magicfilterconfig.
But when printing my LaTeX files with dvips the left margin is greater than
I told to.
Can you help me.
I don't use magicfilter myself, but could it be that it is configured
for letter paper whereas you are sending it A4?
Jorge Sousa hat gesagt: // Jorge Sousa wrote:
I'm trying to use Debian Linux as a ppp dial in server for Win95 clients.
I'm able to login into the linux box only if I have the - Bring terminal
window after dialing - check box checked. If this checkbox is off the line
goes down after a while.
You could try going into /etc/hosts.allow and changing the hostnames for
leafnode so that they use numeric values instead (ie change 'localhost' to
'127.0.0.1'). HTH
Cheers
Dave
On Tue, Feb 09, 1999 at 04:03 -0600, John C. Ellingboe wrote:
I am unable to connect to my Leafnode server
1 - 100 of 219 matches
Mail list logo
