On Tue, Dec 21, 2010 at 08:23:26PM +0100, Pere Nubiola Radigales wrote:
-- Forwarded message --
This is an automatic notification regarding your Bug report
which was filed against the grub-pc package:
#605615: [grub-pc] can not start linux
Però això és a la versió
Bonjour,
J'ai récemment installé une Squeeze 64bits sur un Dell Optoplex 360 et
tout a roulé pour le mieux... jusqu'au reboot. Bien que je parvienne à
redémarrer, il faut m'y reprendre à deux ou trois fois. Comme je ne
reboote pas tous les jours, je n'ai pas encore établi de scénario
clair, mais
Je viens de m'apercevoir que /var/log/dmesg contient les traces du
boot correct et dmesg.0 celles du boot en erreur. On y lit trois
traces general protection fault. (gloups)
Dans les deux cas, on peut également trouver (en amont des erreurs
pour le cas en échec) :
[3.874813] [drm] radeon:
Thierry Chatelet a dit dans un souffle :
On Wednesday 22 December 2010 02:45:41 philippe caurier wrote:
Tu peux utiliser un outil qui s'appelle smartcl (paquet smartools).
Il te fera un diagnostique du disque
Néanmoins la fiabilité de ce genre de tests ne garantit pas du futur.
Mais si il
[Désolé pour la première réponse, elle est partie trop vite !]
Le Wed, 22 Dec 2010 10:38:00 +0100,
David Soulayrol david.soulay...@gmail.com a écrit :
…
[4.236982] r600_cp: Failed to load firmware
radeon/RV620_pfp.bin [4.237029] [drm:r600_startup] *ERROR*
Failed to load firmware! [
Le Wed, 22 Dec 2010 10:38:00 +0100,
David Soulayrol david.soulay...@gmail.com a écrit :
Je viens de m'apercevoir que /var/log/dmesg contient les traces du
boot correct et dmesg.0 celles du boot en erreur. On y lit trois
traces general protection fault. (gloups)
Dans les deux cas, on peut
Le 22 décembre 2010 11:07, Frédéric Boiteux fboit...@calistel.com a écrit :
[Désolé pour la première réponse, elle est partie trop vite !]
Le Wed, 22 Dec 2010 10:38:00 +0100,
David Soulayrol david.soulay...@gmail.com a écrit :
…
[ 4.236982] r600_cp: Failed to load firmware
Sébastien Barthélémy wrote:
Bonjour à tous,
Bonjour Sebastien,
J'ai un disque d'1To qui contient mes données multimédia : musique,
films photos. Des données qui changent assez peu souvent.
J'avais pour habitude de le synchroniser (avec unison à travers le
réseau) avec un autre disque au
Re,
On Wed, Dec 22, 2010 at 12:06:04PM +0100, Jean-Bernard Yata wrote:
[...]
Pour commencer, je voudrais vérifier la sauvegarde. Par exemple en
comparant les checksums des fichiers sur les deux disques. Est-ce
qu'il existe un logiciel pour faire cela ? De manière récurrente ?
Pourquoi ne
Le souci était bien dans GRUB2
La solution d'éditer 40_perso
Un bon tutoriel sur GRUB2 :
philoxserver.homelinux.org:8080/philoxsvr/file/*grub2*.pdf
Le 22/12/2010 08:14, fred a écrit :
Le 22/12/2010 00:44, Jérôme a écrit :
Le mardi 21 décembre 2010 à 19:35 +0100, fred a écrit :
Salut,
Le mercredi 22 décembre 2010 à 12:06:04, Jean-Bernard Yata a
écrit :
[…]
le raid 1 n'est pas un raid de performance, tu seras donc
limité par la vitesse du disque le plus lent.
Par le plus lent en écriture, par le plus rapide en lecture.
--
Sylvain Sauvage
--
Lisez la FAQ de la liste avant
On Tue, 14 Dec 2010 16:44:33 +0100, Yves Rutschle wrote:
Wai, ben autant apprendre à un boeuf à faire des claquettes, si tu vois
ce que je veux dire...
Hmmm on trouve vraiment n'importe quoi sur l'internet:
http://www.youtube.com/watch?v=ZixgIE3WShk
héhé, pômal!
...
Pour eux, je pense
On Mon, Dec 20, 2010 at 10:46:02AM +0100,
Sebastien Rodriguez sebastien.rodrigu...@gmail.com wrote
a message of 22 lines which said:
Si si, ConnectBot (http://code.google.com/p/connectbot/) permet
d'utiliser des clefs d'authentification : je l'utilise avec
succès...
Ah exact, merci, ça
Salut à tous,
J'ai mysql 5.1 sur un debian, j'ai rencontré un souci.
Je n'arrive pas à arrêter le serveur de mysql.
Quand je veux arrêter le serveur de mysql avec la commande suivante :
# /etc/init.d/mysql stop
Stopping MySQL database server: mysqld failed!
Je peux me connecter à la base
Le 22/12/2010 21:49, Maurice Guerrier a écrit :
Salut à tous,
J'ai mysql 5.1 sur un debian, j'ai rencontré un souci.
Je n'arrive pas à arrêter le serveur de mysql.
Quand je veux arrêter le serveur de mysql avec la commande suivante :
# /etc/init.d/mysql stop
Stopping MySQL database server:
Le 22/12/2010 22:12, mouss a écrit :
Le 22/12/2010 21:49, Maurice Guerrier a écrit :
Salut à tous,
J'ai mysql 5.1 sur un debian, j'ai rencontré un souci.
Je n'arrive pas à arrêter le serveur de mysql.
Quand je veux arrêter le serveur de mysql avec la commande suivante :
# /etc/init.d/mysql
Bonjour,
Maurice Guerrier a écrit :
Quand je veux arrêter le serveur de mysql avec la commande suivante :
# /etc/init.d/mysql stop
Stopping MySQL database server: mysqld failed!
J'ai trouvé ce lien : http://www.loovto.net/spip.php?article80 : en
résumé, il faut donner toutes les
Bonsoir
Dans la barre de menu, j'ai perdu la petite icone qui permet de gerer le
son. Quelqu'un saurait-il comment la faire re-apparaitre ?
Clic droit sur la barre, Ajouter au tableau de bord,
Jusque la, ok
Contrôleur de volume.
Il n'y est pas ...
--
Lisez la FAQ de la liste avant de
Alain Dawson a dit dans un souffle :
Bonjour,
J'ai déjà eu ce genre de pb et messages, le disque était OK, mais j'ai
dû changer la carte mère (c'est l'interface sata qui avait des
faiblesses)
Alain
Bonsoir Alain,
Là, c'est sur un portable, un inspiron 1525. Ça va que je suis en France pour
Le jeudi 23 décembre 2010 à 01:11 +0300, Christophe Gallaire a écrit :
Ce serait pas mal de refaire une install à partir de la liste de tous
les
paquets installés...
Ça c'est possible avec
dpkg --get-selections
--
Jérôme
Les flocons... quand il y en a un, ça va. C'est quand il y en a
Bonsoir,
J'aimerais remplacer tous les retours à la ligne dans un fichier par une espace.
Est-ce que quelqu'un peut m'indiquer une commande pour faire ça ?
@+
Christophe
--
Christophe Gallaire
Attention ! Suppression des mails entrants dont la taille est supérieure à 2Mo !
N'envoyez, s'il
Le 23/12/2010 01:07, Christophe Gallaire a écrit :
Bonsoir,
J'aimerais remplacer tous les retours à la ligne dans un fichier par une
espace.
Est-ce que quelqu'un peut m'indiquer une commande pour faire ça ?
@+
Christophe
Bonjour,
Si tu peux utiliser le mode graphique, tu peux
Le 23/12/10 à 03:07, Christophe Gallaire zam...@gmail.com a écrit :
CG Bonsoir,
CG
CG J'aimerais remplacer tous les retours à la ligne dans un fichier par une
espace.
CG Est-ce que quelqu'un peut m'indiquer une commande pour faire ça ?
tr '\n' ' '
tr '\n' ' ' fichier_sur_plusieurs_lignes
avec sed :
sed 'mark; N; s/\n/ /;b:mark'
--
Lisez la FAQ de la liste avant de poser une question :
http://wiki.debian.org/fr/FrenchLists
Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe
vers debian-user-french-requ...@lists.debian.org
En cas de soucis, contactez EN ANGLAIS
Bonjour,
Voici une solution perl qui te gardera ton fichier original en backup.
perl -pi.bak -e 's/\r?\n/ /' ton_fichier
Cordialement,
Djibril
De : Christophe Gallaire zam...@gmail.com
À : Debian French debian-user-french@lists.debian.org
Envoyé le : Jeu 23
2010/12/22 cosme co...@gecgr.co.cu:
Hola
Uso Debian Lenny
tengo instalado un controlador de domio Primario con Samaba, PAM/NSS y
OpenLDAP.
Quiero agregar un BDC a mi dominio.
Qué ficheros deben configurarse para que funcione como BDC???
Mírate la documentación oficial del cómo hacerlo:
El 21/12/10 15:43, Andres Ovalle Gahona escribió:
2010/12/21 Osniel Lima Nuñez toori...@gmail.com
mailto:toori...@gmail.com
Hola Colegas.
He seguido paso a paso la guia:
http://guide.debianizzati.org/index.php/Samba_e_OpenLDAP:_creare_un_controller_di_dominio_con_Debian_Lenny
El 21/12/10 15:24, Osniel Lima Nuñez escribió:
Hola Colegas.
He seguido paso a paso la guia:
http://guide.debianizzati.org/index.php/Samba_e_OpenLDAP:_creare_un_controller_di_dominio_con_Debian_Lenny
Para al fin tener mi pdc en linux.Lo que me sucede y les pido su
colaboración y ayuda es que
El 21/12/10 20:06, cosme escribió:
Hola
Uso Debian Lenny
tengo instalado un controlador de domio Primario con Samaba, PAM/NSS y
OpenLDAP.
Quiero agregar un BDC a mi dominio.
Qué ficheros deben configurarse para que funcione como BDC???
Saludos
Cosme
Samba no funciona como un BDC puro. En
Hola estimados, bueno antes que todo un afectuoso saludo para estas
fiestas de fin de año.
Ahora al grano ;-)
Actualmente uso un programa en windows (swish) que genera películas en
flash las cuales tienen sonido, imagen y puedo colocar controles de
interacción, con esto realizo diversas
El mié, 22-12-2010 a las 12:11 -0300, Felix Perez escribió:
Hola estimados, bueno antes que todo un afectuoso saludo para estas
fiestas de fin de año.
Ahora al grano ;-)
Actualmente uso un programa en windows (swish) que genera películas en
flash las cuales tienen sonido, imagen y puedo
Federico Alberto Sayd escribió:
El 21/12/10 15:24, Osniel Lima Nuñez escribió:
Hola Colegas.
He seguido paso a paso la guia:
http://guide.debianizzati.org/index.php/Samba_e_OpenLDAP:_creare_un_controller_di_dominio_con_Debian_Lenny
Para al fin tener mi pdc en linux.Lo que me sucede y les
El 22/12/10 12:20, yordanis escribió:
Federico Alberto Sayd escribió:
El 21/12/10 15:24, Osniel Lima Nuñez escribió:
Hola Colegas.
He seguido paso a paso la guia:
http://guide.debianizzati.org/index.php/Samba_e_OpenLDAP:_creare_un_controller_di_dominio_con_Debian_Lenny
Para al fin tener
El Wed, 22 Dec 2010 12:11:43 -0300, Felix Perez escribió:
Hola estimados, bueno antes que todo un afectuoso saludo para estas
fiestas de fin de año.
Ahora al grano ;-)
Actualmente uso un programa en windows (swish) que genera películas en
flash las cuales tienen sonido, imagen y puedo
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hola estimados, bueno antes que todo un afectuoso saludo para estas
fiestas de fin de año.
Buenas, lo mismo digo
Ahora al grano ;-)
Actualmente uso un programa en windows (swish) que genera películas en
flash las cuales tienen sonido, imagen
Hola a todos:
Soy nuevo escribiendoles y quiero que me ayuden con esta situacion: Hace 6
meses estaba trabajando y me encomendaron la instalacion y configuracion de
un controlador de dominio basado en Linux, segui esta guia
El día 15 de diciembre de 2010 11:54, gonzalo rivero
fishfromsa...@gmail.com escribió:
El mié, 15-12-2010 a las 11:45 -0600, rantis cares escribió:
Listeros:
Ya he usado el comando sed con anterioridad, han sido muchas veces.
Le explico...
Tengo un archivo de texto (mi agenda) como sigue:
El día 17 de diciembre de 2010 15:20, angeld ang...@froga.net escribió:
Wed, 15 Dec 2010, rantis cares:
Ya he usado el comando sed con anterioridad, han sido muchas veces.
Le explico...
Tengo un archivo de texto (mi agenda) como sigue:
DATOS
Nombre:
Telefono:
Con el comando sed le
El 22/12/10 14:07, Lenin David Gómez Mera escribió:
Hola a todos:
Soy nuevo escribiendoles y quiero que me ayuden con esta situacion:
Hace 6 meses estaba trabajando y me encomendaron la instalacion y
configuracion de un controlador de dominio basado en Linux, segui esta
guia
El 16 de diciembre de 2010 13:54, Camaleón noela...@gmail.com escribió:
El Wed, 15 Dec 2010 09:16:43 -0430, Orlando Nuñez escribió:
El día de ayer le pedí un poco de ayuda para configurar Asterisk-GUI en
un servidor con Debian 5, voy a comenzar a realizar las pruebas hoy,
instale SflPhone
El 14 de diciembre de 2010 17:31, onvi...@gmail.com escribió:
Saludos German.
Muchas gracias por tu respuesta, supongo que el problema era Asteris-GUI,
busque una alternativa y encontre Starfish que tiene un deb para Debian,
me funciono en 1 minuto, cree varias extensiones y ya configure
2010/12/22 jmramirez mas_ke...@hotmail.com:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hola estimados, bueno antes que todo un afectuoso saludo para estas
fiestas de fin de año.
Buenas, lo mismo digo
Ahora al grano ;-)
Actualmente uso un programa en windows (swish) que genera
El mar, 21-12-2010 a las 19:18 +0100, Juan Antonio escribió:
OT
¿Alguien sabe de alguna herramienta o bien si con ipvsadm se puede hacer
lo siguiente?
Necesito ofrecer alta disponibilidad de servicios detras de un director,
y hacerlo en el director, transparente a los nodos finales. Es
Tal vez te pueda servir keepalive junto con haproxy ... puede hacer balanceo
TCP y HTTP además en el cluster le puedes especificar a uno de los
servidores que sea solo backup. Por ejemplo:
backend mybackend
balance roundrobin
cookie JSESSIONID prefix
option httpchk HEAD /check.check
Primero perdonad el OT al cuadrado ... (solo voy a hacer una
observación por lo que si esperas una respuesta pasa al siguiente
email)
2010/12/22 Felix Perez felix.listadeb...@gmail.com:
Hola estimados, bueno antes que todo un afectuoso saludo para estas
fiestas de fin de año.
Ahora al grano
El día 22 de diciembre de 2010 12:18, mariodebian
mariodeb...@gmail.com escribió:
El mié, 22-12-2010 a las 12:11 -0300, Felix Perez escribió:
Hola estimados, bueno antes que todo un afectuoso saludo para estas
fiestas de fin de año.
Ahora al grano ;-)
Actualmente uso un programa en windows
El día 22 de diciembre de 2010 12:31, Camaleón noela...@gmail.com escribió:
El Wed, 22 Dec 2010 12:11:43 -0300, Felix Perez escribió:
Hola estimados, bueno antes que todo un afectuoso saludo para estas
fiestas de fin de año.
Ahora al grano ;-)
Actualmente uso un programa en windows (swish)
Hola lista,
Tengo algunos problemas configurando un proxy con Iptables (DROP by
default), quiciera saber si alguno de ustedes me puede ayudar con este tema.
El escenario es este:
LAN --- FW/Proxy --- WAN
El FW tiene instalado Dansguardian y Squid, configure el iptables con las
reglas necesarias
El día 22 de diciembre de 2010 13:07, jmramirez
mas_ke...@hotmail.com escribió:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hola estimados, bueno antes que todo un afectuoso saludo para estas
fiestas de fin de año.
Buenas, lo mismo digo
Ahora al grano ;-)
Actualmente uso un programa
Saludos Felix.
He visto varios para producció en flash y hasta el momento, el que me parece
más flexible, potente y exportable se llama:
XERTE Project.
Desarrollado por la universidad de nottingham con el framework AIR/Flex.
La versión para escritorio es increíblemente flexible. La versión
El día 22 de diciembre de 2010 13:46, DIEGO QUEVEDO DOCENTE
diegoquevedop.doce...@gmail.com escribió:
hola...
BUENO pues el game engine de blender lo puedes hacer para hacer
videojuegos e interacciones...el punto es que aprenderlo a usar lleva
tiempo, no te recomiendo synfig ya que solo
El día 22 de diciembre de 2010 20:24, Javier Barroso
javibarr...@gmail.com escribió:
Primero perdonad el OT al cuadrado ... (solo voy a hacer una
observación por lo que si esperas una respuesta pasa al siguiente
email)
Pedí ¿Alguna opinión, sugerencia o comentario? por mi no hay problema.
El día 22 de diciembre de 2010 18:04, ghostDancer
peter.g...@gmail.com escribió:
Buenas igual es más complejo que lo que pides, pero le has echado un
vistazo a Scratch (http://scratch.mit.edu/) un entorno de Squeak -
Smalltalk orientado a la educación , multiplataforma, creo que es más
El día 22 de diciembre de 2010 22:46, José Gregorio Díaz Unda
xt4...@yahoo.com escribió:
Saludos Felix.
He visto varios para producció en flash y hasta el momento, el que me parece
más flexible, potente y exportable se llama:
XERTE Project.
Desarrollado por la universidad de nottingham
Hola Felix,
En el tema de la exportabilidad, lo que te podrìa recomendar es apoyarte en
algún estándar para el transporte y reproducción de objetos de aprendizaje.
Dos de los más importantes son SCORM y IMS.
Hay varios reproductores de paquetes SCORM que funcionan online y escritorio.
En
Hola Orlando...
Me entusiasma que tus pruebas vayan muy bien con Asterisk. En verdad he
tenido poca experiencia con este servidor, a parte de leer un poco aquí y
allá. He querido hacer algunas pruebas más serías pero no ha habido tiempo.
Hace tiempo administre una central IP de Cisco,
On 21 dez, 17:20, Gunther Furtado gunfurt...@gmail.com wrote:
Em 21Dez2010 (terça), villani iamthiagovill...@gmail.com disse:
On 21 dez, 10:10, villani iamthiagovill...@gmail.com wrote:
On 21 dez, 08:40, Renato S. Yamane yam...@diamondcut.com.br
wrote:
Em 20-12-2010 17:32, villani
Em 21-12-2010 22:48, Bruno Buys escreveu:
Fala povo,
Gostaria de poder compartilhar meu computador debian com minha esposa.
Isto é, que ela tivesse seu teclado, monitor e mouse, para usá-lo como
se fosse outro computador independente. Me lembro de ter lido sobre
isso a muito tempo, mas só o
Você pode usar o aptosid (antigo sidux),que é o Debian Sid com alguns
recursos para torna-lo mais estável.
On 21 dez, 12:50, César Frias cagfr...@gmail.com wrote:
Boa tarde Guilherme,
obrigado pela ajuda, mas será que essa é a única opção?
Acredito que tenha alguma outra maneira...
Trabalho
Use o seguinte comando alsamixer e veja se a ultima opção do lado direito
aparece a opção de alternar entre o modo 2ch (dois canais) e 6ch (seis
canais).
Se não aparecer, na mesma tela em cima do lado direito tem o modelo de sua
placa de som, informa ela aqui para agente poder ajudar.
Falou
Em
Estou criando um script, para que todo dia primeiro do mês ele cria um pasta
com o nome do mês anterior (por exemplo no dia primeiro de janeiro de 2011
ele cria uma pasta com o nome dezembro 2010).
Estava usando a seguinte estrutura
#!/bin/bash -x
#
hoje=$(date +%B%Y)
mkdir /etc/roberto/$hoje
faz um vetor com os meses. pega o valor do mes atual e compara com a posição
do mês atual no vetor. depois usar a posição do vetor -1. entendeu?
abraços!
2010/12/22 Roberto Torres jrtor...@bol.com.br
Estou criando um script, para que todo dia primeiro do mês ele cria um
pasta
com o nome do
Obrigado plea sugestão Bruno
Mas acabei achando uma outra maneira.
Modifiquei o script para dessa maneira:
#!/bin/bash -x
#
hoje=$(date --date='1 month ago' +%B%Y)
mkdir /etc/roberto/$hoje
com o parâmetro date=1 month ago ele mostra a data de um mês atrás e
utilizando +%B%Y ele
já tentei esta configuração no alsamixer e no arquivo
/alsa-base.config já editei o arquivo para
sudo sh -c 'echo options snd-hda-intel model=3stack-6ch enable=1
index=0 /etc/modprobe.d/alsa-base.conf'
mesmo assim não consegui, estou usando a saida analógica pois meu
aparelho 5.1 Edifier não
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
El 22/12/10 15:11, Roberto Torres escribió:
Estava usando a seguinte estrutura
#!/bin/bash -x
#
hoje=$(date +%B%Y)
mkdir /etc/roberto/$hoje
Mas assim ele cria uma pasta com o mês atual.gostaria que fosse o mês
anterior
Alguma
Olá a todos...
Quero agradecer a todos que me ajudaram durante o ano de 2010.
Cresci muito com todos as dicas, instruções e principalmente com o Espírito
Coletivo, que nós do Open Source, sempre pregamos...
Mas em especial quero agradecer a um membro desta lista, ele está sempre
presente aqui. É
Esse é o espírito do software livre, e em 2011 esta corrente irá aumentar
mais ainda!
Feliz natal para todos!
Em 22 de dezembro de 2010 13:30, Fábio de Sousa fabi...@gmail.comescreveu:
Olá a todos...
Quero agradecer a todos que me ajudaram durante o ano de 2010.
Cresci muito com todos as
Pessoal, recebi um mail com um filminho da IBM onde mostra alguma previsões
para
o futuro principalmente em relação a profissões futuras e as correntes naturais
até na politica (Eu disse política e não politicagem) se alguem se interessar
me
pessa em pvt.
Enviadas: Quarta-feira, 22 de
Em 22/12/2010 15:14, Sandro Wambier escreveu:
Esse é o espírito do software livre, e em 2011 esta corrente irá
aumentar mais ainda!
Feliz natal para todos!
Em 22 de dezembro de 2010 13:30, Fábio de Sousa fabi...@gmail.com
mailto:fabi...@gmail.com escreveu:
Olá a todos...
Quero
Hilmi Taha, 22.12.2010 tarihinde şöyle yazmış:
2. İhtiyacınız olan depoları seçip eklemelisiniz. (synaptic üzerinden veya
doğrudan /etc/apt/sources.list düzenleyerek)
2010/12/22 Mehmet AK ak.meh...@windowslive.com
*2. sorum *firefox gibi editorleri yüklemek için apt-get install komutu
Merhaba Arkadaşlar.
Debian'da minimal kurulum yapmıştım. gnome-core ve xorg yükledim. Seagate 500gb
USB harici harddisk'im var
mehmetak:/home/mehmet# fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bayt
255 heads, 63 sectors/track, 14593 cylinders
Units = silindir of 16065 * 512 = 8225280
http://wiki.debian.org/DebianLive/Howto/USB link yardımcı olabilir. İyi
çalışmalar.
From: Mehmet AK [mailto:ak.meh...@windowslive.com]
Sent: Thursday, December 23, 2010 6:16 AM
To: Debian Grup
Subject: Debian 'da harici harddisk'i kullanmak .
Merhaba Arkadaşlar.
Debian'da minimal
apt-get install ntfs-3g komutu ile harici harddiski tanıtabildim . ve mount
ettim.
yardımlarınız için teşekkürler.
mehmetak:/home/mehmet# mount
/dev/sda5 on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc
Please reproduce as accurate as you can the last 4-5 lines on screen.
Sorry for delay.
There is:
[ ... ] ACPI: preparing to enter system sleep state S5
[ ... ] Disabling non-boot CPUs
[ ... ] CPU 1 now offline
[ ... ] SMP alternatives switching to UP code
[ ... ] Power down
--
To
On Tuesday 21 December 2010 22:16:42 Mark Goldshtein wrote:
It is, however, easier if the names are in some easily remembered progression
(e.g. Hardy, Intrepid, Jaunty etc.) than if they are random (Woody, Sarge,
Etch, Lenny ...)
-
I always found Ubuntu's system more confusing in terms of
All world cooperation videos conferencing
15-11-2010 30-11-2010 15-12-2010 31-12-2010
18-01-2010 02-02-2011 17-02-2011 02-03-2011
16-03-2011 31-3-2011
I am BK. Chandrakant, dedicated member of Prajapita Brahma
The best Christmas gifts,
electronic cigarettes,
health, fashion,
best price for you ,4 --- 9 $,
1. No tar and other carcinogenic substance.
2. Harmless to others and the environment.
3. No danger of second -hand smoking.
4. Smoke in a public place.
5. Enable smokers to abstain from smoking in
On Tue, 21 Dec 2010 18:09:39 -0800, Jim Pazarena wrote:
On 2010-12-21 2:16 PM, Mark Goldshtein wrote:
I am just curious, how novices 'get lost' with, for example, Debian
Stable 2011? Of course, after that, you may add 6.0 and Squeeze
and whatever the Team wants, for example, full GNU v3
On Wed, 22 Dec 2010 02:52:02 -0600, Dennis Busboom wrote:
Create a new user and login into a fresh-new session. Do you still see
the same problem?
Interesting. A newly added user does not have the problem. However the
three users that were set up at the time of installation do.
Then,
To me, it seems reasonable to talk about this as newcomers (me included)
are not aware of the inners of these naming decisions, but my vote would
go for the current system.
[SNIP]
Camaleón
---
Camaleón, a newcommer???
I just don't see that, you are able to like help almost everybody who
On Wed, 22 Dec 2010 11:42:39 +, teddieeb wrote:
To me, it seems reasonable to talk about this as newcomers (me included)
are not aware of the inners of these naming decisions, but my vote would
go for the current system.
[SNIP]
Camaleón
---
Camaleón, a newcommer???
In
Hi all,
Today I installed Debian Squeeze on an entirely encrypted LVM partition as
proposed by the Installer (beta2). After several hours of initializing my
disk it finally installed and when I booted into the new system I saw an
unrecognized partition entry in my Places menu, Computer, and the
On Wed, Dec 22, 2010 at 12:29:30PM +, Alan Levett wrote:
I am sorry, but I cannot understand how to update my newly installed
Lenny 5, which I got from a Distro Supplier as a 5 DVD set. This
installed with no problem, using GUI, apart for the need for a later
version of hplip to drive the HP
o Jim Pazarena deb...@paz.bz:
what possessed the debian people to tack names on to the OS?
having actual version/release numbers seems so much clearer.
And there does appear to BE release numbers. So why promote the
goofy naming system which throws the novice?
Rumors are, there is a Debian
Rumors are, there is a Debian based operating system out there,
that numbers it's releases year/month and gives them
alphabetically ascending code names...
flori
---
Yes, and just like Voldermort, we must not speak it's evil name...
TeddyB
--
To UNSUBSCRIBE, email to
On Tue, Dec 21, 2010 at 08:59:17AM EST, Celejar wrote:
[..]
If we can establish that this was the problem (that it must be
built-in, and not built as a module), is this a bug? I suppose that I
should at least update the Wiki to warn about this.
Not sure if it's relevant, but this vaguely
On 12/22/2010 3:44 PM, teddi...@tmo.blackberry.net wrote:
Rumors are, there is a Debian based operating system out there,
that numbers it's releases year/month and gives them
alphabetically ascending code names...
can you let's us know the name of that new Debian based OS?
flori
---
My experience is with Suse (all numbers) and FreeBSD (all numbers).
Wind$ws doesn't count! And, for that matter, Mac doesn't count.
Out of curiosity why don't Windows and Mac count?
--
Petrus Validus
petrus.vali...@gmail.com
If there isn't a way, I'll make one.
--
To UNSUBSCRIBE, email to
I filed a bug report last week, but haven't heard anything back; thought
maybe you folks might offer a solution.
we...@westek:~$ uname -a
Linux westek 2.6.32-5-686 #1 SMP Fri Dec 10 16:12:40 UTC 2010 i686 GNU/Linux
we...@westek:~$ cat /etc/apt/sources.list
deb http://ftp.us.debian.org/debian/
On Wed, 22 Dec 2010 16:26:07 +0330
Nima Azarbayjany i.adore.deb...@gmail.com wrote:
Hi all,
Today I installed Debian Squeeze on an entirely encrypted LVM
partition as proposed by the Installer (beta2). After several hours
of initializing my disk it finally installed and when I booted into
Nima Azarbayjany:
Today I installed Debian Squeeze on an entirely encrypted LVM partition as
proposed by the Installer (beta2). After several hours of initializing my
disk it finally installed and when I booted into the new system I saw an
unrecognized partition entry in my Places menu,
On Tue, 21 Dec 2010 16:32:32 -0800, Dan Serban wrote:
I once ran multiple X server instances in the past, the details of how I
got it running elude my memory. Though I do remember that I had to
login whenever I went to the second virtual terminal (vt8).
I don't want to do this, what I want
Lisi writes:
It is, however, easier if the names are in some easily remembered
progression (e.g. Hardy, Intrepid, Jaunty etc.) than if they are
random (Woody, Sarge, Etch, Lenny ...)
They are characters from the movie Toy Story. I've never seen it, but
I got the impression back when the
I'm trying to report a bug in gedit and ran reportbug, opting for the
gtk interface. I looked at existing bug reports and none seemed
relevant so I proceeded to create one. After inputting the bug title
and selecting the severity rating (normal) the application quits. When
I look for the report it
They are characters from the movie Toy Story. I've never seen it, but
I got the impression back when the decision to use them was made that
the progression is obvious if you have.
The Toy Story movies are good, I would recommend them.
BTW what is Ubuntu going to do after Zoftig Zebra?
On Wed, 22 Dec 2010 08:13:53 -0600, Kent West wrote:
I filed a bug report last week, but haven't heard anything back; thought
maybe you folks might offer a solution.
(...)
Could it be a regression of this old/fixed bug?
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=566958
The referenced
Hi to all Debian users.
When compiling Mplayer svn with `make', I got the following:
[...]
file.c:23:5: warning: HAVE_MMAP is not defined
file.c: In function 'av_file_map':
file.c:47: error: 'HAVE_MMAP' undeclared (first use in this function)
file.c:47: error: (Each undeclared identifier is
On Wednesday 22 December 2010 14:27:38 John Hasler wrote:
Lisi writes:
It is, however, easier if the names are in some easily remembered
progression (e.g. Hardy, Intrepid, Jaunty etc.) than if they are
random (Woody, Sarge, Etch, Lenny ...)
They are characters from the movie Toy Story.
On Wed, 22 Dec 2010 15:23:16 +
Lisi lisi.re...@gmail.com wrote:
On Wednesday 22 December 2010 14:27:38 John Hasler wrote:
Lisi writes:
It is, however, easier if the names are in some easily remembered
progression (e.g. Hardy, Intrepid, Jaunty etc.) than if they are
random (Woody,
On Wed, 22 Dec 2010 08:13:53 -0600
Kent West we...@acu.edu wrote:
Hello Kent,
we...@westek:~$ cat /etc/apt/sources.list
deb http://ftp.us.debian.org/debian/ unstable main contrib non-free
deb http://ftp.us.debian.org/debian/ testing main contrib non-free
deb http://ftp.us.debian.org/debian/
1 - 100 of 141 matches
Mail list logo