Folks:
I think you may find you also need to enter the serial number on the line
after enable-security, unless that is no longer required in the newest
OFW.. I had to on my machines. There's a nice link to the archives below:
http://www.mail-archive.com/devel@lists.laptop.org/msg18579.html
On Tue, Feb 15, 2011 at 8:30 AM, Kevin Gordon kgordon...@gmail.com wrote:
I think you may find you also need to enter the serial number on the line
after enable-security, unless that is no longer required in the newest
OFW.. I had to on my machines. There's a nice link to the archives below:
I'm working for the paraguayian deployment, and while testing i got the
security of a laptop disabled, but i can seem to enable it again
to disable:
i got a developer key, and on the ok prompt, i typed disable-security
it all worked just fine, i did all that i wanted to do
to enable:
i
It gives a Confirmation code mismatch error..
i've tryed with lower and upper case, just to make sure..
ok enable-security SHC836023B0
Confirmation code mismatch
ok enable-security shc836023b0
Confirmation code mismatch
On Mon, Mar 9, 2009 at 12:37 PM, Mitch Bradley w...@laptop.org wrote:
Rodolfo D. Arce S. wrote:
It gives a Confirmation code mismatch error..
i've tryed with lower and upper case, just to make sure..
ok enable-security SHC836023B0
Confirmation code mismatch
ok enable-security shc836023b0
Confirmation code mismatch
Type:
ok .mfg-data
and make sure that
Rodolfo -
If you're not familiar with Forth and/or Open Firmware, you should
know that whitespace and punctuation are important. Make sure to
follow Mitch's directions carefully, preferably by copying and pasting
from his message. The ok at the beginning of each line is the OFW
prompt
The serial number was correct, so that wasn't the issue.
I tryed the patch that you sended and worked perfectly..
would you be so kind as to explain what it did, i'm not so good with forth
(yet), or perhaps if you could tell where to read about it
greetings.. R
On Mon, Mar 9, 2009 at 1:01 PM,
Rodolfo D. Arce S. wrote:
The serial number was correct, so that wasn't the issue.
I tryed the patch that you sended and worked perfectly..
would you be so kind as to explain what it did, i'm not so good with
forth (yet), or perhaps if you could tell where to read about it
The patch works